Non funziona la sospensione!
Non funziona la sospensione!
Come in oggetto, non mi funziona la sospensione in ram
mentre l'ibernazione (quella su hd) funziona....
Quando clicco su sospendi il computer sembra "sospendersi", la luce del tasto di accensione lampeggia ma per accenderlo devo cliccare per forza sul tasto di accensione (pur avendo impostato da bios il wake up da tastiera e mouse) a questo punto il pc non si risveglia dallo standbye e si riavvia normalente...
ho provato con il comando
sudo dpkg-reconfigure uswsusp
seguo tutta la procedura guidata ma non cambia niente....
Ho un asus p5vd2-x e una scheda video nvidia GeForce 7300 GS (pci-ex) kernel: 2.6.27-7-generic
mentre l'ibernazione (quella su hd) funziona....
Quando clicco su sospendi il computer sembra "sospendersi", la luce del tasto di accensione lampeggia ma per accenderlo devo cliccare per forza sul tasto di accensione (pur avendo impostato da bios il wake up da tastiera e mouse) a questo punto il pc non si risveglia dallo standbye e si riavvia normalente...
ho provato con il comando
sudo dpkg-reconfigure uswsusp
seguo tutta la procedura guidata ma non cambia niente....
Ho un asus p5vd2-x e una scheda video nvidia GeForce 7300 GS (pci-ex) kernel: 2.6.27-7-generic
Re: Non funziona la sospensione!
Quanta ram hai? sul vecchio pc di mia sorella faceva così e aveva robe come 128 mb di ram

Kevin
Kevin
una vita senza linux non merita di essere vissuta!!!!
Re: Non funziona la sospensione!
1 gb
spero basti
spero basti
Re: Non funziona la sospensione!
a me lo fa se non installo i driver proprietari da sistema, amministrazione, driver hardware
Un titolo ben azzeccato attira l'attenzione degli esperti in quel campo, fa risparmiare tempo a voi, aumenta la probabilità di successo.
Re: Non funziona la sospensione!
mm non voglio incasinarmi sui driver......
per me è s2ram è una funzione mooolto importante.......
suggerimenti? Soluzioni??
per me è s2ram è una funzione mooolto importante.......
suggerimenti? Soluzioni??
Re: Non funziona la sospensione!
non ti incasini, è tutto automatico, ma se non vuoi risolvere ....
Un titolo ben azzeccato attira l'attenzione degli esperti in quel campo, fa risparmiare tempo a voi, aumenta la probabilità di successo.
Re: Non funziona la sospensione!
ma io penso di aver già installato tutti i driver (anke proprietari)....
nvidia ecc.....
Te parli di qlkuno specifico??
nvidia ecc.....
Te parli di qlkuno specifico??
Re: Non funziona la sospensione!
niente di specifico, se li hai già installati da da sistema, amministrazione, driver hardware ti rimane solo la possibilità di scaricarli dal sito Nvidia. Io ho la scheda ati quindi non so dirti di più, ma a me la sospensione funziona solo dopo aver scaricato quelli del produttore.
Un titolo ben azzeccato attira l'attenzione degli esperti in quel campo, fa risparmiare tempo a voi, aumenta la probabilità di successo.
Re: Non funziona la sospensione!
ma perchè il problema dovrebbero essere proprio i driver della scheda video?
Re: Non funziona la sospensione!
io ti so dire soltanto quello che è capitato a me, purtroppo la mia scienza è limitata, molto limitata.
Un titolo ben azzeccato attira l'attenzione degli esperti in quel campo, fa risparmiare tempo a voi, aumenta la probabilità di successo.
Re: Non funziona la sospensione!
ho installato con successo i driver 180.11 da synaptic....
non è cambiato niente... il pc sembra andare in sospensione ma poi si riavvia anzichè "svegliarsi"
altri suggerimenti-soluzioni??
non è cambiato niente... il pc sembra andare in sospensione ma poi si riavvia anzichè "svegliarsi"
altri suggerimenti-soluzioni??
- FioPos
- Scoppiettante Seguace

- Messaggi: 428
- Iscrizione: mercoledì 7 maggio 2008, 20:50
- Distribuzione: Ubuntu 12.10 Quantal 64 bit
- Località: prov. CO
Re: Non funziona la sospensione!
ho lo stesso identico problema anche se sul pc fisso, non so da quando però però perchè non uso molto spesso la sospensione... di sicuro con Hardy mi funzionava... >:(
Ho scheda video Ati ma non mi sembra sia quello il problema, x il resto è tutto ok...
Ho scheda video Ati ma non mi sembra sia quello il problema, x il resto è tutto ok...
Re: Non funziona la sospensione!
>:( >:(
riup per tutti e due allora!
riup per tutti e due allora!
Re: Non funziona la sospensione!
Ho letto tanti thread....
ho installato uswsusp provato questi comandi ma niente
* s2ram -f -a 3
* s2ram -f -a 2
* s2ram -f -a 1
* s2ram -f -p -m
* s2ram -f -p -s
* s2ram -f -m
* s2ram -f -s
* s2ram -f -p
* s2ram -f -a 1 -m
* s2ram -f -a 1 -s
la domanda è:
potrebbe essere un problema di swap?
Al momento il mio swap è configurato su /dev/sda6 però per gparted non esiste nessuna partizione con questo nome, è normale?
vi posto qlk mio file:
fstab
menu.lst
in menu e in fstab non ci dovrebbero essere anche da qlk parte il parametro resume????
acpi-support
ho letto anke della possibiltà di utilizzare il pacchetto pm-utils (che ho installato)
qlkuno mi sa dire qlk in merito?
Scusate se ho messo troppa carne al fuoco, ma il problema urge!
ho installato uswsusp provato questi comandi ma niente
* s2ram -f -a 3
* s2ram -f -a 2
* s2ram -f -a 1
* s2ram -f -p -m
* s2ram -f -p -s
* s2ram -f -m
* s2ram -f -s
* s2ram -f -p
* s2ram -f -a 1 -m
* s2ram -f -a 1 -s
la domanda è:
potrebbe essere un problema di swap?
Al momento il mio swap è configurato su /dev/sda6 però per gparted non esiste nessuna partizione con questo nome, è normale?
vi posto qlk mio file:
fstab
Codice: Seleziona tutto
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sda5
UUID=f2227a95-6098-4ed3-a8cd-c1a0071a14b4 / ext3 relatime,errors=remount-ro 0 1
# /dev/sda6
UUID=758f23b4-96b4-473b-9aac-90dd78b8f629 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/sda1 /media/xp ntfs defaults,auto,nls=utf8,uid=1000 0 0
/dev/sdb1 /media/Dati ntfs defaults,auto,nls=utf8,uid=1000 0 0
Codice: Seleziona tutto
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0
## Graphical boot menu location
gfxmenu=/boot/gfxmenu/default.message
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
# Pretty colours
color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sda5 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,4)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(single-user) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Linux Mint 6, kernel 2.6.27-7-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-7-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.27-7-generic
quiet
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sdb1
title Microsoft Windows XP Professional
root (hd1,0)
savedefault
makeactive
map (hd0) (hd1)
map (hd1) (hd0)
chainloader +1
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Altro:
root
title Linux Mint 6, kernel 2.6.27-7-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-7-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.27-7-generic
title Linux Mint 6, kernel Last successful boot
root (hd0,4)
kernel /boot/last-good-boot/vmlinuz root=/dev/sda5 ro quiet splash last-good-boot
quiet
title Linux Mint 6, memtest86+
root (hd0,4)
kernel /boot/memtest86+.bin
quiet
acpi-support
Codice: Seleziona tutto
#
# Configuration file for the acpi-support package
#
#
# The acpi-support package is intended as "glue" to make special functions of
# laptops work. Specifically, it translates special function keys for some
# laptop models into actions or generic function key presses.
#
#
# Suspend/hibernate method
# ------------------------
#
# When gnome-power-manager or klaptopdaemon are running, acpi-support will
# translate the suspend and hibernate keys of laptops into special "suspend"
# and "hibernate" keys that these daemons handle.
#
# Only in situations where there is no gnome-power-manager or klaptopdaemon
# running, acpi-support needs to perform suspend/hibernate in some other way.
# There are several options for this. The options are:
#
# dbus-pm:
# Perform suspend and hibernate actions via a DBUS request to the power
# management daemon. This works for power management daemons that we don't
# know of. (For gnome-power-manager and klaptopdaemon this will do nothing,
# since those will be detected when they are running, and triggered using
# a virtual keypress.)
#
# dbus-hal:
# Perform suspend and hibernate actions via a DBUS request directly to HAL,
# bypassing any running power management daemons.
#
# pm-utils:
# Use pm-suspend and pm-hibernate to suspend and hibernate. (The dbus method
# normally results in this as well, but calls through dbus. Use this option
# only if you don't have dbus installed.)
#
# hibernate:
# Use the hibernate package to suspend and hibernate.
#
# acpi-support:
# Use the legacy built-in suspend/hibernate support. (DEPRECATED)
#
# none:
# Do not attempt to suspend/hibernate. Set SUSPEND_METHODS="none" to
# disable suspend/hibernate handling in acpi-support.
#
# If you specify dbus or pm-utils, the result will normally be the same as when
# you suspend from your desktop environment. If you specify "hibernate" or
# "acpi-support", be aware that this probably does not match what your desktop
# environment would do (unless you have managed to configure something so that
# the DBUS power management interfaces call the hibernate package).
#
#
# Please specify a space separated list of options. The recommended value is
# "dbus pm-utils"
#
SUSPEND_METHODS="dbus-pm dbus-hal pm-utils"
#
# LEGACY BUILT IN SUSPEND SUPPORT (DEPRECATED)
# --------------------------------------------
#
# These options only work for the "acpi-support" suspend method. This is NOT
# recommended, but is retained for backward compatibility reasons.
#
# Comment the next line to disable ACPI suspend to RAM
ACPI_SLEEP=true
# Comment the next line to disable suspend to disk
ACPI_HIBERNATE=true
# Change the following to "standby" to use ACPI S1 sleep, rather than S3.
# This will save less power, but may work on more machines
ACPI_SLEEP_MODE=mem
# Add modules to this list to have them removed before suspend and reloaded
# on resume. An example would be MODULES="em8300 yenta_socket"
#
# Note that network cards and USB controllers will automatically be unloaded
# unless they're listed in MODULES_WHITELIST
MODULES=""
# Add modules to this list to leave them in the kernel over suspend/resume
MODULES_WHITELIST=""
# Should we save and restore state using the VESA BIOS Extensions?
SAVE_VBE_STATE=true
# The file that we use to save the vbestate
VBESTATE=/var/lib/acpi-support/vbestate
# Should we attempt to warm-boot the video hardware on resume?
POST_VIDEO=true
# Save and restore video state?
# SAVE_VIDEO_PCI_STATE=true
# Should we switch the screen off with DPMS on suspend?
USE_DPMS=true
# Use Radeontool to switch the screen off? Seems to be needed on some machines
# RADEON_LIGHT=true
# Uncomment the next line to switch away from X and back again after resume.
# This is needed for some hardware, but should be unnecessary on most.
# DOUBLE_CONSOLE_SWITCH=true
# Set the following to "platform" if you want to use ACPI to shut down
# your machine on hibernation
HIBERNATE_MODE=shutdown
# Comment this out to disable screen locking on resume
LOCK_SCREEN=true
# Uncomment this line to have DMA disabled before suspend and reenabled
# afterwards
# DISABLE_DMA=true
# Uncomment this line to attempt to reset the drive on resume. This seems
# to be needed for some Sonys
# RESET_DRIVE=true
# Add services to this list to stop them before suspend and restart them in
# the resume process.
STOP_SERVICES=""
# Restart Infra Red services on resume - off by default as it crashes some
# machines
RESTART_IRDA=false
# Switch to laptop-mode on battery power - off by default as it causes odd
# hangs on some machines. (Note: This is reported to cause breakage in
# Debian - see deb bug #425800. Leaving enabled for Ubuntu for now
# since presumably it's still valid here.)
ENABLE_LAPTOP_MODE=false
# Add to this list network interfaces that you don't want to be stopped
# during suspend (in fact any network interface whose name starts with
# a prefix given in this list is skipped)
SKIP_INTERFACES="dummy qemu"
# Note: to enable "laptop mode" (to spin down your hard drive for longer
# periods of time), install the laptop-mode-tools package and configure
# it in /etc/laptop-mode/laptop-mode.conf.
qlkuno mi sa dire qlk in merito?
Scusate se ho messo troppa carne al fuoco, ma il problema urge!
Re: Non funziona la sospensione!
il resume lo puoi aggiungere nel menu.lst in fono alla riga del kernel con
resume=/dev/partizione di swap
resume=/dev/partizione di swap
Un titolo ben azzeccato attira l'attenzione degli esperti in quel campo, fa risparmiare tempo a voi, aumenta la probabilità di successo.
Re: Non funziona la sospensione!
Fatto ma non cambia niente...
Ma possibile non ci sia nessuno in grado di risolvere questo problema?!
Ma possibile non ci sia nessuno in grado di risolvere questo problema?!
Re: Non funziona la sospensione!
ennesimo up senza speranza.......
Chi c’è in linea
Visualizzano questa sezione: Majestic-12 [Bot] e 10 ospiti
