nel mio PC ho 4 partizioni che ospitano altrettante root di vari ubuntu: Kubuntu 8.4, Ubuntu 8.10, Ubuntu 8.10 con Kubuntu-desktop + Xubuntu-desktop e infine Ubuntu Jaunty che ho installato ad Alpha 3 e sempre aggiornato senza problemi.
una ulteriore partizione ospita la /home comune a tutti.
dopo gli ultimi aggiornamenti quando da Jaunty provo ad accedere la mia /home comune il browser si blocca (diventa grigio) e poi appare un messaggio che dice che non riesce ad accedere.
da tutti gli altri ambienti la /home comune viene acceduta correttamente, quindi è 'buona'
potete suggerirmi una soluzione? o qualche tentativo da fare per determinare meglio il problema?
nonostante la struttura disco da smanettone io non sono un esperto, con il terminale me la cavo appena.
grazie
[Desktop] browser non accede a /home
-
corradoventu
- Imperturbabile Insigne
- Messaggi: 4002
- Iscrizione: domenica 27 aprile 2008, 22:23
- Desktop: GNOME
- Distribuzione: Ubuntu 22.04,23.10,24.04,24.10
- Sesso: Maschile
- Località: Rezzoaglio (GE)
- Contatti:
[Desktop] browser non accede a /home
Con o senza religione, i buoni si comportano bene e i cattivi male, ma ci vuole la religione per far comportare male i buoni.
(Steven Weinberg)
(Steven Weinberg)
Re: [Desktop] browser non accede a /home
Posta il contenuto del file /etc/fstab di Jaunty...
Prima di aprire una discussione leggi le Guide, poi vedi se c'è un HowTo nel Wiki e fai una ricerca nel Forum!
Applica semplicemente il [Risolto]! Prova: http://forum.ubuntu-it.org/viewtopic.php?f=70&t=548821
Vuoi qualcosa di piu' dal forum? Prova i miei script: http://forum.ubuntu-it.org/viewtopic.php?f=70&t=597066
Applica semplicemente il [Risolto]! Prova: http://forum.ubuntu-it.org/viewtopic.php?f=70&t=548821
Vuoi qualcosa di piu' dal forum? Prova i miei script: http://forum.ubuntu-it.org/viewtopic.php?f=70&t=597066
-
corradoventu
- Imperturbabile Insigne
- Messaggi: 4002
- Iscrizione: domenica 27 aprile 2008, 22:23
- Desktop: GNOME
- Distribuzione: Ubuntu 22.04,23.10,24.04,24.10
- Sesso: Maschile
- Località: Rezzoaglio (GE)
- Contatti:
Re: [Desktop] browser non accede a /home
questo è /etc/fstab di jaunty su sda5, con home su sdb5, che non va
sotto quello di intrepid su sda9, sempre con home su sdb5, che accede ok a /home ...
su sda8 c'è swap
su sda7 ubuntu 8.10 + kubuntu + xubuntu ... che accede ok a /home ...
su sda6 kubuntu 8.4.1 ... che accede ok a /home ...
su sda1 ntfs windows xp (vergogna)
su sdb1 windows dati vfat
grazie
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
#
proc /proc proc defaults 0 0
# / was on /dev/sda5 during installation
UUID=7a1bc90e-927b-4375-9ee9-03afb14f4dac / ext3 relatime,errors=remount-ro 0 1
# /home was on /dev/sdb5 during installation
UUID=973130e0-fc5b-4a65-849b-14b12386e9d2 /home ext3 relatime 0 2
# none was on /dev/sda8 during installation
UUID=e0f6287d-15d2-48dc-a9ae-313d54e8fa2f none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
# /etc/fstab: static file system information.
#
#
proc /proc proc defaults 0 0
# /dev/sda9
UUID=5df68612-1640-498d-99fc-d6b56156ea95 / ext3 relatime,errors=remount-ro 0 1
# /dev/sdb5
UUID=973130e0-fc5b-4a65-849b-14b12386e9d2 /home ext3 relatime 0 2
# /dev/sda8
UUID=e0f6287d-15d2-48dc-a9ae-313d54e8fa2f none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
sotto quello di intrepid su sda9, sempre con home su sdb5, che accede ok a /home ...
su sda8 c'è swap
su sda7 ubuntu 8.10 + kubuntu + xubuntu ... che accede ok a /home ...
su sda6 kubuntu 8.4.1 ... che accede ok a /home ...
su sda1 ntfs windows xp (vergogna)
su sdb1 windows dati vfat
grazie
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
#
proc /proc proc defaults 0 0
# / was on /dev/sda5 during installation
UUID=7a1bc90e-927b-4375-9ee9-03afb14f4dac / ext3 relatime,errors=remount-ro 0 1
# /home was on /dev/sdb5 during installation
UUID=973130e0-fc5b-4a65-849b-14b12386e9d2 /home ext3 relatime 0 2
# none was on /dev/sda8 during installation
UUID=e0f6287d-15d2-48dc-a9ae-313d54e8fa2f none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
# /etc/fstab: static file system information.
#
#
proc /proc proc defaults 0 0
# /dev/sda9
UUID=5df68612-1640-498d-99fc-d6b56156ea95 / ext3 relatime,errors=remount-ro 0 1
# /dev/sdb5
UUID=973130e0-fc5b-4a65-849b-14b12386e9d2 /home ext3 relatime 0 2
# /dev/sda8
UUID=e0f6287d-15d2-48dc-a9ae-313d54e8fa2f none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
Con o senza religione, i buoni si comportano bene e i cattivi male, ma ci vuole la religione per far comportare male i buoni.
(Steven Weinberg)
(Steven Weinberg)
Re: [Desktop] browser non accede a /home
Che tipo di disco è sdb?
Posta l'output di questo comando eseguito su Jaunty:
Posta l'output di questo comando eseguito su Jaunty:
Codice: Seleziona tutto
sudo fdisk -lPrima di aprire una discussione leggi le Guide, poi vedi se c'è un HowTo nel Wiki e fai una ricerca nel Forum!
Applica semplicemente il [Risolto]! Prova: http://forum.ubuntu-it.org/viewtopic.php?f=70&t=548821
Vuoi qualcosa di piu' dal forum? Prova i miei script: http://forum.ubuntu-it.org/viewtopic.php?f=70&t=597066
Applica semplicemente il [Risolto]! Prova: http://forum.ubuntu-it.org/viewtopic.php?f=70&t=548821
Vuoi qualcosa di piu' dal forum? Prova i miei script: http://forum.ubuntu-it.org/viewtopic.php?f=70&t=597066
-
corradoventu
- Imperturbabile Insigne
- Messaggi: 4002
- Iscrizione: domenica 27 aprile 2008, 22:23
- Desktop: GNOME
- Distribuzione: Ubuntu 22.04,23.10,24.04,24.10
- Sesso: Maschile
- Località: Rezzoaglio (GE)
- Contatti:
Re: [Desktop] browser non accede a /home
corrado@corrado-desktop:~$ sudo fdisk -l
[sudo] password for corrado:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x31243123
Device Boot Start End Blocks Id System
/dev/sda1 * 1 10574 84935623+ 7 HPFS/NTFS
/dev/sda2 10575 19457 71352697+ 5 Extended
/dev/sda5 10575 13423 22884561 83 Linux
/dev/sda6 13424 16272 22884561 83 Linux
/dev/sda7 16273 17691 11398086 83 Linux
/dev/sda8 19123 19457 2690856 82 Linux swap / Solaris
/dev/sda9 17692 19122 11494476 83 Linux
Partition table entries are not in disk order
Disk /dev/sdb: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000607f9
Device Boot Start End Blocks Id System
/dev/sdb1 1 6596 52982338+ b W95 FAT32
/dev/sdb2 6597 9729 25165822+ 5 Extended
/dev/sdb5 6597 9729 25165791 83 Linux
corrado@corrado-desktop:~$
[sudo] password for corrado:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x31243123
Device Boot Start End Blocks Id System
/dev/sda1 * 1 10574 84935623+ 7 HPFS/NTFS
/dev/sda2 10575 19457 71352697+ 5 Extended
/dev/sda5 10575 13423 22884561 83 Linux
/dev/sda6 13424 16272 22884561 83 Linux
/dev/sda7 16273 17691 11398086 83 Linux
/dev/sda8 19123 19457 2690856 82 Linux swap / Solaris
/dev/sda9 17692 19122 11494476 83 Linux
Partition table entries are not in disk order
Disk /dev/sdb: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000607f9
Device Boot Start End Blocks Id System
/dev/sdb1 1 6596 52982338+ b W95 FAT32
/dev/sdb2 6597 9729 25165822+ 5 Extended
/dev/sdb5 6597 9729 25165791 83 Linux
corrado@corrado-desktop:~$
Con o senza religione, i buoni si comportano bene e i cattivi male, ma ci vuole la religione per far comportare male i buoni.
(Steven Weinberg)
(Steven Weinberg)
-
corradoventu
- Imperturbabile Insigne
- Messaggi: 4002
- Iscrizione: domenica 27 aprile 2008, 22:23
- Desktop: GNOME
- Distribuzione: Ubuntu 22.04,23.10,24.04,24.10
- Sesso: Maschile
- Località: Rezzoaglio (GE)
- Contatti:
Re: [Desktop] browser non accede a /home
per prova sono partito con il vecchio kernel 2.6.28.6 che però è partito in low graphic mode ... home funziona ... tornando al nuovo 2.6.28.8 il problema ritorna. ci può aiutare?
Con o senza religione, i buoni si comportano bene e i cattivi male, ma ci vuole la religione per far comportare male i buoni.
(Steven Weinberg)
(Steven Weinberg)
Re: [Desktop] browser non accede a /home
Prova a postare l'output del comando dmesg
Prima di aprire una discussione leggi le Guide, poi vedi se c'è un HowTo nel Wiki e fai una ricerca nel Forum!
Applica semplicemente il [Risolto]! Prova: http://forum.ubuntu-it.org/viewtopic.php?f=70&t=548821
Vuoi qualcosa di piu' dal forum? Prova i miei script: http://forum.ubuntu-it.org/viewtopic.php?f=70&t=597066
Applica semplicemente il [Risolto]! Prova: http://forum.ubuntu-it.org/viewtopic.php?f=70&t=548821
Vuoi qualcosa di piu' dal forum? Prova i miei script: http://forum.ubuntu-it.org/viewtopic.php?f=70&t=597066
-
corradoventu
- Imperturbabile Insigne
- Messaggi: 4002
- Iscrizione: domenica 27 aprile 2008, 22:23
- Desktop: GNOME
- Distribuzione: Ubuntu 22.04,23.10,24.04,24.10
- Sesso: Maschile
- Località: Rezzoaglio (GE)
- Contatti:
Re: [Desktop] browser non accede a /home
da terminal ho fatto 'select all' ... ha ritagliato solo i dati dalla finestra corrente ... è normale?
comunque ho ri-selezionato tutto ... copiato qui sotto.
in ogni caso, a questo punto non mi preoccupo più troppo, visto che /home è buona, si tratta solo di un problema con il nuovo kernel che spero verrà risolto con i nuovi aggiornamenti.
nell'interesse di tutti però sarebbe bene segnalare il problema al development ... se sapessi come fare
grazie ancora
corrado
[ 0.004031] SELinux: Disabled at boot.
[ 0.004048] AppArmor: AppArmor initialized
[ 0.004055] Mount-cache hash table entries: 512
[ 0.004167] Initializing cgroup subsys ns
[ 0.004172] Initializing cgroup subsys cpuacct
[ 0.004175] Initializing cgroup subsys memory
[ 0.004178] Initializing cgroup subsys freezer
[ 0.004190] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004193] CPU: L2 cache: 4096K
[ 0.004195] CPU: Physical Processor ID: 0
[ 0.004197] CPU: Processor Core ID: 0
[ 0.004201] using mwait in idle threads.
[ 0.004208] Checking 'hlt' instruction... OK.
[ 0.022234] ACPI: Core revision 20080926
[ 0.023674] ACPI: Checking initramfs for custom DSDT
[ 0.328599] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.371551] CPU0: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06
[ 0.372001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4100.16 BogoMIPS (lpj=8200329)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.456652] CPU1: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06
[ 0.456670] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.460046] Brought up 2 CPUs
[ 0.460049] Total of 2 processors activated (8200.70 BogoMIPS).
[ 0.460107] CPU0 attaching sched-domain:
[ 0.460110] domain 0: span 0-1 level MC
[ 0.460113] groups: 0 1
[ 0.460119] CPU1 attaching sched-domain:
[ 0.460121] domain 0: span 0-1 level MC
[ 0.460123] groups: 1 0
[ 0.460193] net_namespace: 776 bytes
[ 0.460193] Booting paravirtualized kernel on bare hardware
[ 0.460284] Time: 19:31:29 Date: 03/10/09
[ 0.460284] regulator: core version 0.5
[ 0.460284] NET: Registered protocol family 16
[ 0.460284] EISA bus registered
[ 0.460284] ACPI: bus type pci registered
[ 0.460284] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.460284] PCI: Not using MMCONFIG.
[ 0.460284] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=128
[ 0.460284] PCI: Using configuration type 1 for base access
[ 0.464722] ACPI: EC: Look up EC in DSDT
[ 0.473619] ACPI: Interpreter enabled
[ 0.473625] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.473645] ACPI: Using IOAPIC for interrupt routing
[ 0.473695] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.478747] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.478749] PCI: Using MMCONFIG for extended config space
[ 0.485589] ACPI: No dock devices found.
[ 0.485589] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.485589] pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.485589] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.485589] pci 0000:00:02.0: PME# disabled
[ 0.485589] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf7fe0000-0xf7feffff]
[ 0.485589] pci 0000:00:0a.0: reg 14 io port: [0xd400-0xd407]
[ 0.485589] pci 0000:00:0a.0: PME# supported from D3hot D3cold
[ 0.485589] pci 0000:00:0a.0: PME# disabled
[ 0.485589] pci 0000:00:0f.0: reg 10 io port: [0xe000-0xe007]
[ 0.485589] pci 0000:00:0f.0: reg 14 io port: [0xdc00-0xdc03]
[ 0.485589] pci 0000:00:0f.0: reg 18 io port: [0xd880-0xd887]
[ 0.485589] pci 0000:00:0f.0: reg 1c io port: [0xd800-0xd803]
[ 0.485589] pci 0000:00:0f.0: reg 20 io port: [0xd480-0xd48f]
[ 0.485589] pci 0000:00:0f.0: reg 24 io port: [0xd000-0xd0ff]
[ 0.488027] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
[ 0.488114] pci 0000:00:10.0: reg 20 io port: [0xe080-0xe09f]
[ 0.488136] pci 0000:00:10.0: supports D1 D2
[ 0.488138] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.488142] pci 0000:00:10.0: PME# disabled
[ 0.488199] pci 0000:00:10.1: reg 20 io port: [0xe400-0xe41f]
[ 0.488220] pci 0000:00:10.1: supports D1 D2
[ 0.488222] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.488227] pci 0000:00:10.1: PME# disabled
[ 0.488284] pci 0000:00:10.2: reg 20 io port: [0xe480-0xe49f]
[ 0.488305] pci 0000:00:10.2: supports D1 D2
[ 0.488307] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.488312] pci 0000:00:10.2: PME# disabled
[ 0.488368] pci 0000:00:10.3: reg 20 io port: [0xec00-0xec1f]
[ 0.488390] pci 0000:00:10.3: supports D1 D2
[ 0.488392] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.488396] pci 0000:00:10.3: PME# disabled
[ 0.488432] pci 0000:00:10.4: reg 10 32bit mmio: [0xf7fff800-0xf7fff8ff]
[ 0.488475] pci 0000:00:10.4: supports D1 D2
[ 0.488477] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.488481] pci 0000:00:10.4: PME# disabled
[ 0.488674] pci 0000:00:12.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.488682] pci 0000:00:12.0: reg 14 32bit mmio: [0xf7fffc00-0xf7fffcff]
[ 0.488719] pci 0000:00:12.0: supports D1 D2
[ 0.488721] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.488726] pci 0000:00:12.0: PME# disabled
[ 0.488873] pci 0000:00:01.0: bridge 32bit mmio: [0xf3c00000-0xf3cfffff]
[ 0.488916] pci 0000:02:00.0: reg 10 32bit mmio: [0xf6000000-0xf6ffffff]
[ 0.488928] pci 0000:02:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.488940] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf5000000-0xf5ffffff]
[ 0.488948] pci 0000:02:00.0: reg 24 io port: [0xcc00-0xcc7f]
[ 0.488955] pci 0000:02:00.0: reg 30 32bit mmio: [0xf7de0000-0xf7dfffff]
[ 0.489025] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff]
[ 0.489029] pci 0000:00:02.0: bridge 32bit mmio: [0xf3d00000-0xf7dfffff]
[ 0.489034] pci 0000:00:02.0: bridge 32bit mmio pref: [0xbff00000-0xdfefffff]
[ 0.489048] bus 00 -> node 0
[ 0.489054] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.489405] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[ 0.489532] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.500533] ACPI: PCI Root Bridge [PCI1] (0000:80)
[ 0.500533] pci 0000:80:01.0: reg 10 64bit mmio: [0xf7efc000-0xf7efffff]
[ 0.500533] pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
[ 0.500533] pci 0000:80:01.0: PME# disabled
[ 0.500533] bus 80 -> node 0
[ 0.500533] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 0.500533] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.500533] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.500533] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.500533] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.500560] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.500675] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.500791] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.500907] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.500958] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 72, should be 43 [20080926]
[ 0.500958] ACPI: WMI: Mapper loaded
[ 0.500958] SCSI subsystem initialized
[ 0.500958] libata version 3.00 loaded.
[ 0.500958] usbcore: registered new interface driver usbfs
[ 0.500958] usbcore: registered new interface driver hub
[ 0.500958] usbcore: registered new device driver usb
[ 0.500958] PCI: Using ACPI for IRQ routing
[ 0.508009] Bluetooth: Core ver 2.13
[ 0.508024] NET: Registered protocol family 31
[ 0.508024] Bluetooth: HCI device and connection manager initialized
[ 0.508026] Bluetooth: HCI socket layer initialized
[ 0.508028] NET: Registered protocol family 8
[ 0.508030] NET: Registered protocol family 20
[ 0.508045] NetLabel: Initializing
[ 0.508045] NetLabel: domain hash size = 128
[ 0.508045] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.508045] NetLabel: unlabeled traffic allowed by default
[ 0.508059] AppArmor: AppArmor Filesystem Enabled
[ 0.512010] pnp: PnP ACPI init
[ 0.512020] ACPI: bus type pnp registered
[ 0.517443] pnp: PnP ACPI: found 16 devices
[ 0.517445] ACPI: ACPI bus type pnp unregistered
[ 0.517449] PnPBIOS: Disabled by ACPI PNP
[ 0.517461] system 00:09: ioport range 0x295-0x296 has been reserved
[ 0.517464] system 00:09: ioport range 0x3e0-0x3e7 has been reserved
[ 0.517466] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.517469] system 00:09: ioport range 0x800-0x87f has been reserved
[ 0.517472] system 00:09: ioport range 0x400-0x41f has been reserved
[ 0.517478] system 00:09: iomem range 0xf7efc000-0xf7efffff has been reserved
[ 0.517481] system 00:09: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.517487] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.517490] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.517496] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.517502] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.517505] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[ 0.517508] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.517510] system 00:0e: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.517513] system 00:0e: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.552568] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.552571] pci 0000:00:01.0: IO window: disabled
[ 0.552577] pci 0000:00:01.0: MEM window: 0xf3c00000-0xf3cfffff
[ 0.552581] pci 0000:00:01.0: PREFETCH window: disabled
[ 0.552588] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 0.552592] pci 0000:00:02.0: IO window: 0xc000-0xcfff
[ 0.552597] pci 0000:00:02.0: MEM window: 0xf3d00000-0xf7dfffff
[ 0.552602] pci 0000:00:02.0: PREFETCH window: 0x000000bff00000-0x000000dfefffff
[ 0.552618] pci 0000:00:01.0: setting latency timer to 64
[ 0.552628] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[ 0.552633] pci 0000:00:02.0: setting latency timer to 64
[ 0.552637] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.552640] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.552642] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.552644] bus: 01 index 1 mmio: [0xf3c00000-0xf3cfffff]
[ 0.552646] bus: 01 index 2 mmio: [0x0-0x0]
[ 0.552648] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.552650] bus: 02 index 0 io port: [0xc000-0xcfff]
[ 0.552652] bus: 02 index 1 mmio: [0xf3d00000-0xf7dfffff]
[ 0.552654] bus: 02 index 2 mmio: [0xbff00000-0xdfefffff]
[ 0.552656] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.552658] bus: 80 index 0 io port: [0x00-0xffff]
[ 0.552661] bus: 80 index 1 mmio: [0x000000-0xffffffff]
[ 0.552668] NET: Registered protocol family 2
[ 0.564044] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.564259] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.564619] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.564808] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.564811] TCP reno registered
[ 0.572064] NET: Registered protocol family 1
[ 0.572167] checking if image is initramfs... it is
[ 1.052662] Switched to high resolution mode on CPU 1
[ 1.056097] Switched to high resolution mode on CPU 0
[ 1.188568] Freeing initrd memory: 7429k freed
[ 1.189350] cpufreq: No nForce2 chipset.
[ 1.189851] audit: initializing netlink socket (disabled)
[ 1.189882] type=2000 audit(1236713489.188:1): initialized
[ 1.197766] highmem bounce pool size: 64 pages
[ 1.197771] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.200160] VFS: Disk quotas dquot_6.5.1
[ 1.200244] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.201197] fuse init (API version 7.10)
[ 1.201350] msgmni has been set to 1724
[ 1.201546] alg: No test for stdrng (krng)
[ 1.201558] io scheduler noop registered
[ 1.201560] io scheduler anticipatory registered
[ 1.201562] io scheduler deadline registered
[ 1.201575] io scheduler cfq registered (default)
[ 1.201591] PCI: VIA PCI bridge detected.Disabling DAC.
[ 1.201700] pci 0000:02:00.0: Boot video device
[ 1.206528] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 1.206573] pcieport-driver 0000:00:02.0: found MSI capability
[ 1.206617] pcieport-driver 0000:00:02.0: irq 2303 for MSI/MSI-X
[ 1.206633] pci_express 0000:00:02.0:pcie00: allocate port service
[ 1.206673] pci_express 0000:00:02.0:pcie01: allocate port service
[ 1.206710] pci_express 0000:00:02.0:pcie02: allocate port service
[ 1.206747] pci_express 0000:00:02.0:pcie03: allocate port service
[ 1.209439] aer 0000:00:02.0:pcie01: service driver aer loaded
[ 1.209478] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.209781] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.210050] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.210052] ACPI: Power Button (FF) [PWRF]
[ 1.210130] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.210132] ACPI: Power Button (CM) [PWRB]
[ 1.210623] ACPI Error (psparse-0524): Method parse/execution failed [\_PR_.CPU1._PDC] (Node f6c0f180), AE_INVALID_TABLE_LENGTH
[ 1.210712] processor ACPI_CPU:00: registered as cooling_device0
[ 1.210774] ACPI Error (psparse-0524): Method parse/execution failed [\_PR_.CPU2._PDC] (Node f6c0f240), AE_INVALID_TABLE_LENGTH
[ 1.210846] processor ACPI_CPU:01: registered as cooling_device1
[ 1.214162] isapnp: Scanning for PnP cards...
[ 1.568099] isapnp: No Plug & Play device found
[ 1.576687] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.576802] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.576918] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.577478] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.579117] brd: module loaded
[ 1.579817] loop: module loaded
[ 1.580003] Fixed MDIO Bus: probed
[ 1.580010] PPP generic driver version 2.4.2
[ 1.580137] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.580189] Driver 'sd' needs updating - please use bus_type methods
[ 1.580222] Driver 'sr' needs updating - please use bus_type methods
[ 1.580584] sata_via 0000:00:0f.0: version 2.4
[ 1.580602] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.580631] sata_via 0000:00:0f.0: routed to hard irq line 10
[ 1.580686] scsi0 : sata_via
[ 1.580811] scsi1 : sata_via
[ 1.582221] ata1: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd480 irq 21
[ 1.582224] ata2: SATA max UDMA/133 cmd 0xd880 ctl 0xd800 bmdma 0xd488 irq 21
[ 1.784010] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.987391] ata1.00: ATA-7: MAXTOR STM3160211AS, 3.AAE, max UDMA/133
[ 1.987394] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.054037] ata1.00: configured for UDMA/133
[ 2.256014] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.469493] ata2.00: ATA-7: MAXTOR STM380811AS, 3.AAE, max UDMA/133
[ 2.469496] ata2.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.536146] ata2.00: configured for UDMA/133
[ 2.536260] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM316021 3.AA PQ: 0 ANSI: 5
[ 2.536430] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.536446] sd 0:0:0:0: [sda] Write Protect is off
[ 2.536448] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.536472] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.536545] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.536559] sd 0:0:0:0: [sda] Write Protect is off
[ 2.536561] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.536585] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.536589] sda: sda1 sda2
[ 2.643606] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.643694] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.643769] scsi 1:0:0:0: Direct-Access ATA MAXTOR STM380811 3.AA PQ: 0 ANSI: 5
[ 2.643923] sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 2.643938] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.643940] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.643964] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.644018] sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 2.644033] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.644035] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.644058] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.644062] sdb: sdb1 sdb2
[ 2.688619] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.688703] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.689931] pata_via 0000:00:0f.1: version 0.3.3
[ 2.690047] scsi2 : pata_via
[ 2.690149] scsi3 : pata_via
[ 2.691671] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 2.691674] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 3.008401] ata4.00: ATAPI: PIONEER DVD-RW DVR-112D, 1.09, max UDMA/66
[ 3.024292] ata4.00: configured for UDMA/66
[ 3.036738] scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVR-112D 1.09 PQ: 0 ANSI: 5
[ 3.060267] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 3.060271] Uniform CD-ROM driver Revision: 3.20
[ 3.060400] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.060483] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 3.060864] usbcore: registered new interface driver libusual
[ 3.060939] usbcore: registered new interface driver usbserial
[ 3.060973] USB Serial support registered for generic
[ 3.061011] usbcore: registered new interface driver usbserial_generic
[ 3.061013] usbserial: USB Serial Driver core
[ 3.061109] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 3.061111] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 3.061260] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.064085] mice: PS/2 mouse device common for all mice
[ 3.068208] rtc_cmos 00:02: RTC can wake from S4
[ 3.068262] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 3.068295] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 3.068400] device-mapper: uevent: version 1.0.3
[ 3.068518] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.068570] device-mapper: multipath: version 1.0.5 loaded
[ 3.068572] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.068686] EISA: Probing bus 0 at eisa.0
[ 3.068726] EISA: Detected 0 cards.
[ 3.068732] cpuidle: using governor ladder
[ 3.068734] cpuidle: using governor menu
[ 3.069284] TCP cubic registered
[ 3.069430] NET: Registered protocol family 10
[ 3.069842] lo: Disabled Privacy Extensions
[ 3.070159] NET: Registered protocol family 17
[ 3.070201] Bluetooth: L2CAP ver 2.11
[ 3.070203] Bluetooth: L2CAP socket layer initialized
[ 3.070205] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.070207] Bluetooth: SCO socket layer initialized
[ 3.070225] Bluetooth: RFCOMM socket layer initialized
[ 3.070232] Bluetooth: RFCOMM TTY layer initialized
[ 3.070234] Bluetooth: RFCOMM ver 1.10
[ 3.070283] Using IPI No-Shortcut mode
[ 3.070422] registered taskstats version 1
[ 3.070541] Magic number: 1:226:546
[ 3.070545] scsi_generic sg2: hash matches
[ 3.070564] mem null: hash matches
[ 3.070579] processor ACPI_CPU:01: hash matches
[ 3.070621] rtc_cmos 00:02: setting system clock to 2009-03-10 19:31:31 UTC (1236713491)
[ 3.070624] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.070626] EDD information not available.
[ 3.070864] Freeing unused kernel memory: 528k freed
[ 3.070979] Write protecting the kernel text: 4068k
[ 3.071021] Write protecting the kernel read-only data: 1528k
[ 3.086164] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.315913] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.315999] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.316011] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 3.316124] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 3.316159] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000e080
[ 3.316258] usb usb1: configuration #1 chosen from 1 choice
[ 3.316298] hub 1-0:1.0: USB hub found
[ 3.316305] hub 1-0:1.0: 2 ports detected
[ 3.316440] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 3.316447] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 3.316494] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 3.316533] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000e400
[ 3.316602] usb usb2: configuration #1 chosen from 1 choice
[ 3.316626] hub 2-0:1.0: USB hub found
[ 3.316633] hub 2-0:1.0: 2 ports detected
[ 3.316715] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 3.316722] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 3.316765] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 3.316787] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e480
[ 3.316852] usb usb3: configuration #1 chosen from 1 choice
[ 3.316878] hub 3-0:1.0: USB hub found
[ 3.316883] hub 3-0:1.0: 2 ports detected
[ 3.316962] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 3.316969] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 3.317007] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 3.317036] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000ec00
[ 3.317102] usb usb4: configuration #1 chosen from 1 choice
[ 3.317125] hub 4-0:1.0: USB hub found
[ 3.317133] hub 4-0:1.0: 2 ports detected
[ 3.326984] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.326987] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 3.327018] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 3.327048] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 3.327112] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 3.327141] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf7fff800
[ 3.334734] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 3.341448] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 3.341530] usb usb5: configuration #1 chosen from 1 choice
[ 3.341560] hub 5-0:1.0: USB hub found
[ 3.341567] hub 5-0:1.0: 8 ports detected
[ 3.341688] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.342376] eth0: VIA Rhine II at 0xf7fffc00, 00:19:66:00:ff:5e, IRQ 23.
[ 3.343086] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
[ 3.436688] Floppy drive(s): fd0 is 1.44M
[ 3.466048] FDC 0 is a post-1991 82077
[ 3.724515] usb 5-7: new high speed USB device using ehci_hcd and address 3
[ 3.943222] usb 5-7: configuration #1 chosen from 1 choice
[ 3.956880] Initializing USB Mass Storage driver...
[ 3.968551] scsi4 : SCSI emulation for USB Mass Storage devices
[ 3.969057] usbcore: registered new interface driver usb-storage
[ 3.969060] USB Mass Storage support registered.
[ 3.969136] usb-storage: device found at 3
[ 3.969138] usb-storage: waiting for device to settle before scanning
[ 4.192508] usb 1-2: new low speed USB device using uhci_hcd and address 2
[ 4.368103] usb 1-2: configuration #1 chosen from 1 choice
[ 4.380300] usbcore: registered new interface driver hiddev
[ 4.393221] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/input/input4
[ 4.396050] generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-2/input0
[ 4.396064] usbcore: registered new interface driver usbhid
[ 4.396066] usbhid: v2.6:USB HID core driver
[ 4.713537] PM: Starting manual resume from disk
[ 4.713540] PM: Resume from partition 8:8
[ 4.713542] PM: Checking hibernation image.
[ 4.713916] PM: Resume from disk failed.
[ 4.764794] kjournald starting. Commit interval 5 seconds
[ 4.764803] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.968132] usb-storage: device scan complete
[ 8.968732] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 8.969235] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 8.969735] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 8.970235] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 8.971306] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 8.971366] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 8.972152] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[ 8.972189] sd 4:0:0:1: Attached scsi generic sg4 type 0
[ 8.973021] sd 4:0:0:2: [sde] Attached SCSI removable disk
[ 8.973057] sd 4:0:0:2: Attached scsi generic sg5 type 0
[ 8.973900] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[ 8.973937] sd 4:0:0:3: Attached scsi generic sg6 type 0
[ 10.265793] udev: starting version 139
[ 11.695073] Linux agpgart interface v0.103
[ 11.778421] parport_pc 00:07: reported by Plug and Play ACPI
[ 11.778524] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 11.785689] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 11.790990] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.823108] agpgart: Detected VIA PT880 Ultra chipset
[ 11.827145] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 12.000059] nvidia: module license 'NVIDIA' taints kernel.
[ 12.256775] nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 12.256784] nvidia 0000:02:00.0: setting latency timer to 64
[ 12.257623] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.35 Sun Feb 22 20:26:14 PST 2009
[ 12.291634] ppdev: user-space parallel port driver
[ 12.496265] HDA Intel 0000:80:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 12.496329] HDA Intel 0000:80:01.0: setting latency timer to 64
[ 12.496334] HDA Intel 0000:80:01.0: PCI: Disallowing DAC for device
[ 12.529900] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 12.688232] lp0: using parport0 (interrupt-driven).
[ 12.777595] Adding 2690848k swap on /dev/sda8. Priority:-1 extents:1 across:2690848k
[ 13.332334] EXT3 FS on sda5, internal journal
[ 14.073531] kjournald starting. Commit interval 5 seconds
[ 14.073662] EXT3 FS on sdb5, internal journal
[ 14.073667] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.252354] type=1505 audit(1236709902.681:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2673
[ 14.332987] type=1505 audit(1236709902.761:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2677
[ 14.333092] type=1505 audit(1236709902.761:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2677
[ 14.333136] type=1505 audit(1236709902.761:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2677
[ 14.333182] type=1505 audit(1236709902.761:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2677
[ 14.488779] type=1505 audit(1236709902.917:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2682
[ 14.488959] type=1505 audit(1236709902.917:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2682
[ 14.532157] type=1505 audit(1236709902.961:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2686
[ 15.088746] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[ 15.088749] apm: disabled - APM is not SMP safe.
[ 18.064635] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.064638] Bluetooth: BNEP filters: protocol multicast
[ 18.094350] Bridge firewalling registered
[ 24.571916] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 34.740005] eth0: no IPv6 routers present
[ 39.977864] warning: `pulseaudio' uses 32-bit capabilities (legacy support in use)
[ 40.910610] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
corrado@corrado-desktop:~$
comunque ho ri-selezionato tutto ... copiato qui sotto.
in ogni caso, a questo punto non mi preoccupo più troppo, visto che /home è buona, si tratta solo di un problema con il nuovo kernel che spero verrà risolto con i nuovi aggiornamenti.
nell'interesse di tutti però sarebbe bene segnalare il problema al development ... se sapessi come fare
grazie ancora
corrado
[ 0.004031] SELinux: Disabled at boot.
[ 0.004048] AppArmor: AppArmor initialized
[ 0.004055] Mount-cache hash table entries: 512
[ 0.004167] Initializing cgroup subsys ns
[ 0.004172] Initializing cgroup subsys cpuacct
[ 0.004175] Initializing cgroup subsys memory
[ 0.004178] Initializing cgroup subsys freezer
[ 0.004190] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004193] CPU: L2 cache: 4096K
[ 0.004195] CPU: Physical Processor ID: 0
[ 0.004197] CPU: Processor Core ID: 0
[ 0.004201] using mwait in idle threads.
[ 0.004208] Checking 'hlt' instruction... OK.
[ 0.022234] ACPI: Core revision 20080926
[ 0.023674] ACPI: Checking initramfs for custom DSDT
[ 0.328599] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.371551] CPU0: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06
[ 0.372001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4100.16 BogoMIPS (lpj=8200329)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.456652] CPU1: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06
[ 0.456670] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.460046] Brought up 2 CPUs
[ 0.460049] Total of 2 processors activated (8200.70 BogoMIPS).
[ 0.460107] CPU0 attaching sched-domain:
[ 0.460110] domain 0: span 0-1 level MC
[ 0.460113] groups: 0 1
[ 0.460119] CPU1 attaching sched-domain:
[ 0.460121] domain 0: span 0-1 level MC
[ 0.460123] groups: 1 0
[ 0.460193] net_namespace: 776 bytes
[ 0.460193] Booting paravirtualized kernel on bare hardware
[ 0.460284] Time: 19:31:29 Date: 03/10/09
[ 0.460284] regulator: core version 0.5
[ 0.460284] NET: Registered protocol family 16
[ 0.460284] EISA bus registered
[ 0.460284] ACPI: bus type pci registered
[ 0.460284] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.460284] PCI: Not using MMCONFIG.
[ 0.460284] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=128
[ 0.460284] PCI: Using configuration type 1 for base access
[ 0.464722] ACPI: EC: Look up EC in DSDT
[ 0.473619] ACPI: Interpreter enabled
[ 0.473625] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.473645] ACPI: Using IOAPIC for interrupt routing
[ 0.473695] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.478747] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.478749] PCI: Using MMCONFIG for extended config space
[ 0.485589] ACPI: No dock devices found.
[ 0.485589] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.485589] pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.485589] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.485589] pci 0000:00:02.0: PME# disabled
[ 0.485589] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf7fe0000-0xf7feffff]
[ 0.485589] pci 0000:00:0a.0: reg 14 io port: [0xd400-0xd407]
[ 0.485589] pci 0000:00:0a.0: PME# supported from D3hot D3cold
[ 0.485589] pci 0000:00:0a.0: PME# disabled
[ 0.485589] pci 0000:00:0f.0: reg 10 io port: [0xe000-0xe007]
[ 0.485589] pci 0000:00:0f.0: reg 14 io port: [0xdc00-0xdc03]
[ 0.485589] pci 0000:00:0f.0: reg 18 io port: [0xd880-0xd887]
[ 0.485589] pci 0000:00:0f.0: reg 1c io port: [0xd800-0xd803]
[ 0.485589] pci 0000:00:0f.0: reg 20 io port: [0xd480-0xd48f]
[ 0.485589] pci 0000:00:0f.0: reg 24 io port: [0xd000-0xd0ff]
[ 0.488027] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
[ 0.488114] pci 0000:00:10.0: reg 20 io port: [0xe080-0xe09f]
[ 0.488136] pci 0000:00:10.0: supports D1 D2
[ 0.488138] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.488142] pci 0000:00:10.0: PME# disabled
[ 0.488199] pci 0000:00:10.1: reg 20 io port: [0xe400-0xe41f]
[ 0.488220] pci 0000:00:10.1: supports D1 D2
[ 0.488222] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.488227] pci 0000:00:10.1: PME# disabled
[ 0.488284] pci 0000:00:10.2: reg 20 io port: [0xe480-0xe49f]
[ 0.488305] pci 0000:00:10.2: supports D1 D2
[ 0.488307] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.488312] pci 0000:00:10.2: PME# disabled
[ 0.488368] pci 0000:00:10.3: reg 20 io port: [0xec00-0xec1f]
[ 0.488390] pci 0000:00:10.3: supports D1 D2
[ 0.488392] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.488396] pci 0000:00:10.3: PME# disabled
[ 0.488432] pci 0000:00:10.4: reg 10 32bit mmio: [0xf7fff800-0xf7fff8ff]
[ 0.488475] pci 0000:00:10.4: supports D1 D2
[ 0.488477] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.488481] pci 0000:00:10.4: PME# disabled
[ 0.488674] pci 0000:00:12.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.488682] pci 0000:00:12.0: reg 14 32bit mmio: [0xf7fffc00-0xf7fffcff]
[ 0.488719] pci 0000:00:12.0: supports D1 D2
[ 0.488721] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.488726] pci 0000:00:12.0: PME# disabled
[ 0.488873] pci 0000:00:01.0: bridge 32bit mmio: [0xf3c00000-0xf3cfffff]
[ 0.488916] pci 0000:02:00.0: reg 10 32bit mmio: [0xf6000000-0xf6ffffff]
[ 0.488928] pci 0000:02:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.488940] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf5000000-0xf5ffffff]
[ 0.488948] pci 0000:02:00.0: reg 24 io port: [0xcc00-0xcc7f]
[ 0.488955] pci 0000:02:00.0: reg 30 32bit mmio: [0xf7de0000-0xf7dfffff]
[ 0.489025] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff]
[ 0.489029] pci 0000:00:02.0: bridge 32bit mmio: [0xf3d00000-0xf7dfffff]
[ 0.489034] pci 0000:00:02.0: bridge 32bit mmio pref: [0xbff00000-0xdfefffff]
[ 0.489048] bus 00 -> node 0
[ 0.489054] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.489405] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[ 0.489532] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.500533] ACPI: PCI Root Bridge [PCI1] (0000:80)
[ 0.500533] pci 0000:80:01.0: reg 10 64bit mmio: [0xf7efc000-0xf7efffff]
[ 0.500533] pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
[ 0.500533] pci 0000:80:01.0: PME# disabled
[ 0.500533] bus 80 -> node 0
[ 0.500533] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 0.500533] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.500533] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.500533] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.500533] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.500560] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.500675] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.500791] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.500907] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.500958] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 72, should be 43 [20080926]
[ 0.500958] ACPI: WMI: Mapper loaded
[ 0.500958] SCSI subsystem initialized
[ 0.500958] libata version 3.00 loaded.
[ 0.500958] usbcore: registered new interface driver usbfs
[ 0.500958] usbcore: registered new interface driver hub
[ 0.500958] usbcore: registered new device driver usb
[ 0.500958] PCI: Using ACPI for IRQ routing
[ 0.508009] Bluetooth: Core ver 2.13
[ 0.508024] NET: Registered protocol family 31
[ 0.508024] Bluetooth: HCI device and connection manager initialized
[ 0.508026] Bluetooth: HCI socket layer initialized
[ 0.508028] NET: Registered protocol family 8
[ 0.508030] NET: Registered protocol family 20
[ 0.508045] NetLabel: Initializing
[ 0.508045] NetLabel: domain hash size = 128
[ 0.508045] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.508045] NetLabel: unlabeled traffic allowed by default
[ 0.508059] AppArmor: AppArmor Filesystem Enabled
[ 0.512010] pnp: PnP ACPI init
[ 0.512020] ACPI: bus type pnp registered
[ 0.517443] pnp: PnP ACPI: found 16 devices
[ 0.517445] ACPI: ACPI bus type pnp unregistered
[ 0.517449] PnPBIOS: Disabled by ACPI PNP
[ 0.517461] system 00:09: ioport range 0x295-0x296 has been reserved
[ 0.517464] system 00:09: ioport range 0x3e0-0x3e7 has been reserved
[ 0.517466] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.517469] system 00:09: ioport range 0x800-0x87f has been reserved
[ 0.517472] system 00:09: ioport range 0x400-0x41f has been reserved
[ 0.517478] system 00:09: iomem range 0xf7efc000-0xf7efffff has been reserved
[ 0.517481] system 00:09: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.517487] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.517490] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.517496] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.517502] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.517505] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[ 0.517508] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.517510] system 00:0e: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.517513] system 00:0e: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.552568] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.552571] pci 0000:00:01.0: IO window: disabled
[ 0.552577] pci 0000:00:01.0: MEM window: 0xf3c00000-0xf3cfffff
[ 0.552581] pci 0000:00:01.0: PREFETCH window: disabled
[ 0.552588] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 0.552592] pci 0000:00:02.0: IO window: 0xc000-0xcfff
[ 0.552597] pci 0000:00:02.0: MEM window: 0xf3d00000-0xf7dfffff
[ 0.552602] pci 0000:00:02.0: PREFETCH window: 0x000000bff00000-0x000000dfefffff
[ 0.552618] pci 0000:00:01.0: setting latency timer to 64
[ 0.552628] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[ 0.552633] pci 0000:00:02.0: setting latency timer to 64
[ 0.552637] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.552640] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.552642] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.552644] bus: 01 index 1 mmio: [0xf3c00000-0xf3cfffff]
[ 0.552646] bus: 01 index 2 mmio: [0x0-0x0]
[ 0.552648] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.552650] bus: 02 index 0 io port: [0xc000-0xcfff]
[ 0.552652] bus: 02 index 1 mmio: [0xf3d00000-0xf7dfffff]
[ 0.552654] bus: 02 index 2 mmio: [0xbff00000-0xdfefffff]
[ 0.552656] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.552658] bus: 80 index 0 io port: [0x00-0xffff]
[ 0.552661] bus: 80 index 1 mmio: [0x000000-0xffffffff]
[ 0.552668] NET: Registered protocol family 2
[ 0.564044] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.564259] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.564619] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.564808] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.564811] TCP reno registered
[ 0.572064] NET: Registered protocol family 1
[ 0.572167] checking if image is initramfs... it is
[ 1.052662] Switched to high resolution mode on CPU 1
[ 1.056097] Switched to high resolution mode on CPU 0
[ 1.188568] Freeing initrd memory: 7429k freed
[ 1.189350] cpufreq: No nForce2 chipset.
[ 1.189851] audit: initializing netlink socket (disabled)
[ 1.189882] type=2000 audit(1236713489.188:1): initialized
[ 1.197766] highmem bounce pool size: 64 pages
[ 1.197771] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.200160] VFS: Disk quotas dquot_6.5.1
[ 1.200244] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.201197] fuse init (API version 7.10)
[ 1.201350] msgmni has been set to 1724
[ 1.201546] alg: No test for stdrng (krng)
[ 1.201558] io scheduler noop registered
[ 1.201560] io scheduler anticipatory registered
[ 1.201562] io scheduler deadline registered
[ 1.201575] io scheduler cfq registered (default)
[ 1.201591] PCI: VIA PCI bridge detected.Disabling DAC.
[ 1.201700] pci 0000:02:00.0: Boot video device
[ 1.206528] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 1.206573] pcieport-driver 0000:00:02.0: found MSI capability
[ 1.206617] pcieport-driver 0000:00:02.0: irq 2303 for MSI/MSI-X
[ 1.206633] pci_express 0000:00:02.0:pcie00: allocate port service
[ 1.206673] pci_express 0000:00:02.0:pcie01: allocate port service
[ 1.206710] pci_express 0000:00:02.0:pcie02: allocate port service
[ 1.206747] pci_express 0000:00:02.0:pcie03: allocate port service
[ 1.209439] aer 0000:00:02.0:pcie01: service driver aer loaded
[ 1.209478] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.209781] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.210050] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.210052] ACPI: Power Button (FF) [PWRF]
[ 1.210130] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.210132] ACPI: Power Button (CM) [PWRB]
[ 1.210623] ACPI Error (psparse-0524): Method parse/execution failed [\_PR_.CPU1._PDC] (Node f6c0f180), AE_INVALID_TABLE_LENGTH
[ 1.210712] processor ACPI_CPU:00: registered as cooling_device0
[ 1.210774] ACPI Error (psparse-0524): Method parse/execution failed [\_PR_.CPU2._PDC] (Node f6c0f240), AE_INVALID_TABLE_LENGTH
[ 1.210846] processor ACPI_CPU:01: registered as cooling_device1
[ 1.214162] isapnp: Scanning for PnP cards...
[ 1.568099] isapnp: No Plug & Play device found
[ 1.576687] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.576802] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.576918] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.577478] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.579117] brd: module loaded
[ 1.579817] loop: module loaded
[ 1.580003] Fixed MDIO Bus: probed
[ 1.580010] PPP generic driver version 2.4.2
[ 1.580137] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.580189] Driver 'sd' needs updating - please use bus_type methods
[ 1.580222] Driver 'sr' needs updating - please use bus_type methods
[ 1.580584] sata_via 0000:00:0f.0: version 2.4
[ 1.580602] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.580631] sata_via 0000:00:0f.0: routed to hard irq line 10
[ 1.580686] scsi0 : sata_via
[ 1.580811] scsi1 : sata_via
[ 1.582221] ata1: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd480 irq 21
[ 1.582224] ata2: SATA max UDMA/133 cmd 0xd880 ctl 0xd800 bmdma 0xd488 irq 21
[ 1.784010] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.987391] ata1.00: ATA-7: MAXTOR STM3160211AS, 3.AAE, max UDMA/133
[ 1.987394] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.054037] ata1.00: configured for UDMA/133
[ 2.256014] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.469493] ata2.00: ATA-7: MAXTOR STM380811AS, 3.AAE, max UDMA/133
[ 2.469496] ata2.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.536146] ata2.00: configured for UDMA/133
[ 2.536260] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM316021 3.AA PQ: 0 ANSI: 5
[ 2.536430] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.536446] sd 0:0:0:0: [sda] Write Protect is off
[ 2.536448] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.536472] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.536545] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.536559] sd 0:0:0:0: [sda] Write Protect is off
[ 2.536561] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.536585] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.536589] sda: sda1 sda2
[ 2.643606] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.643694] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.643769] scsi 1:0:0:0: Direct-Access ATA MAXTOR STM380811 3.AA PQ: 0 ANSI: 5
[ 2.643923] sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 2.643938] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.643940] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.643964] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.644018] sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 2.644033] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.644035] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.644058] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.644062] sdb: sdb1 sdb2
[ 2.688619] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.688703] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.689931] pata_via 0000:00:0f.1: version 0.3.3
[ 2.690047] scsi2 : pata_via
[ 2.690149] scsi3 : pata_via
[ 2.691671] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 2.691674] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 3.008401] ata4.00: ATAPI: PIONEER DVD-RW DVR-112D, 1.09, max UDMA/66
[ 3.024292] ata4.00: configured for UDMA/66
[ 3.036738] scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVR-112D 1.09 PQ: 0 ANSI: 5
[ 3.060267] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 3.060271] Uniform CD-ROM driver Revision: 3.20
[ 3.060400] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.060483] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 3.060864] usbcore: registered new interface driver libusual
[ 3.060939] usbcore: registered new interface driver usbserial
[ 3.060973] USB Serial support registered for generic
[ 3.061011] usbcore: registered new interface driver usbserial_generic
[ 3.061013] usbserial: USB Serial Driver core
[ 3.061109] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 3.061111] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 3.061260] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.064085] mice: PS/2 mouse device common for all mice
[ 3.068208] rtc_cmos 00:02: RTC can wake from S4
[ 3.068262] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 3.068295] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 3.068400] device-mapper: uevent: version 1.0.3
[ 3.068518] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.068570] device-mapper: multipath: version 1.0.5 loaded
[ 3.068572] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.068686] EISA: Probing bus 0 at eisa.0
[ 3.068726] EISA: Detected 0 cards.
[ 3.068732] cpuidle: using governor ladder
[ 3.068734] cpuidle: using governor menu
[ 3.069284] TCP cubic registered
[ 3.069430] NET: Registered protocol family 10
[ 3.069842] lo: Disabled Privacy Extensions
[ 3.070159] NET: Registered protocol family 17
[ 3.070201] Bluetooth: L2CAP ver 2.11
[ 3.070203] Bluetooth: L2CAP socket layer initialized
[ 3.070205] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.070207] Bluetooth: SCO socket layer initialized
[ 3.070225] Bluetooth: RFCOMM socket layer initialized
[ 3.070232] Bluetooth: RFCOMM TTY layer initialized
[ 3.070234] Bluetooth: RFCOMM ver 1.10
[ 3.070283] Using IPI No-Shortcut mode
[ 3.070422] registered taskstats version 1
[ 3.070541] Magic number: 1:226:546
[ 3.070545] scsi_generic sg2: hash matches
[ 3.070564] mem null: hash matches
[ 3.070579] processor ACPI_CPU:01: hash matches
[ 3.070621] rtc_cmos 00:02: setting system clock to 2009-03-10 19:31:31 UTC (1236713491)
[ 3.070624] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.070626] EDD information not available.
[ 3.070864] Freeing unused kernel memory: 528k freed
[ 3.070979] Write protecting the kernel text: 4068k
[ 3.071021] Write protecting the kernel read-only data: 1528k
[ 3.086164] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.315913] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.315999] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.316011] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 3.316124] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 3.316159] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000e080
[ 3.316258] usb usb1: configuration #1 chosen from 1 choice
[ 3.316298] hub 1-0:1.0: USB hub found
[ 3.316305] hub 1-0:1.0: 2 ports detected
[ 3.316440] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 3.316447] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 3.316494] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 3.316533] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000e400
[ 3.316602] usb usb2: configuration #1 chosen from 1 choice
[ 3.316626] hub 2-0:1.0: USB hub found
[ 3.316633] hub 2-0:1.0: 2 ports detected
[ 3.316715] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 3.316722] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 3.316765] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 3.316787] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e480
[ 3.316852] usb usb3: configuration #1 chosen from 1 choice
[ 3.316878] hub 3-0:1.0: USB hub found
[ 3.316883] hub 3-0:1.0: 2 ports detected
[ 3.316962] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 3.316969] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 3.317007] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 3.317036] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000ec00
[ 3.317102] usb usb4: configuration #1 chosen from 1 choice
[ 3.317125] hub 4-0:1.0: USB hub found
[ 3.317133] hub 4-0:1.0: 2 ports detected
[ 3.326984] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.326987] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 3.327018] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 3.327048] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 3.327112] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 3.327141] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf7fff800
[ 3.334734] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 3.341448] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 3.341530] usb usb5: configuration #1 chosen from 1 choice
[ 3.341560] hub 5-0:1.0: USB hub found
[ 3.341567] hub 5-0:1.0: 8 ports detected
[ 3.341688] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.342376] eth0: VIA Rhine II at 0xf7fffc00, 00:19:66:00:ff:5e, IRQ 23.
[ 3.343086] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
[ 3.436688] Floppy drive(s): fd0 is 1.44M
[ 3.466048] FDC 0 is a post-1991 82077
[ 3.724515] usb 5-7: new high speed USB device using ehci_hcd and address 3
[ 3.943222] usb 5-7: configuration #1 chosen from 1 choice
[ 3.956880] Initializing USB Mass Storage driver...
[ 3.968551] scsi4 : SCSI emulation for USB Mass Storage devices
[ 3.969057] usbcore: registered new interface driver usb-storage
[ 3.969060] USB Mass Storage support registered.
[ 3.969136] usb-storage: device found at 3
[ 3.969138] usb-storage: waiting for device to settle before scanning
[ 4.192508] usb 1-2: new low speed USB device using uhci_hcd and address 2
[ 4.368103] usb 1-2: configuration #1 chosen from 1 choice
[ 4.380300] usbcore: registered new interface driver hiddev
[ 4.393221] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/input/input4
[ 4.396050] generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-2/input0
[ 4.396064] usbcore: registered new interface driver usbhid
[ 4.396066] usbhid: v2.6:USB HID core driver
[ 4.713537] PM: Starting manual resume from disk
[ 4.713540] PM: Resume from partition 8:8
[ 4.713542] PM: Checking hibernation image.
[ 4.713916] PM: Resume from disk failed.
[ 4.764794] kjournald starting. Commit interval 5 seconds
[ 4.764803] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.968132] usb-storage: device scan complete
[ 8.968732] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 8.969235] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 8.969735] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 8.970235] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 8.971306] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 8.971366] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 8.972152] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[ 8.972189] sd 4:0:0:1: Attached scsi generic sg4 type 0
[ 8.973021] sd 4:0:0:2: [sde] Attached SCSI removable disk
[ 8.973057] sd 4:0:0:2: Attached scsi generic sg5 type 0
[ 8.973900] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[ 8.973937] sd 4:0:0:3: Attached scsi generic sg6 type 0
[ 10.265793] udev: starting version 139
[ 11.695073] Linux agpgart interface v0.103
[ 11.778421] parport_pc 00:07: reported by Plug and Play ACPI
[ 11.778524] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 11.785689] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 11.790990] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.823108] agpgart: Detected VIA PT880 Ultra chipset
[ 11.827145] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 12.000059] nvidia: module license 'NVIDIA' taints kernel.
[ 12.256775] nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 12.256784] nvidia 0000:02:00.0: setting latency timer to 64
[ 12.257623] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.35 Sun Feb 22 20:26:14 PST 2009
[ 12.291634] ppdev: user-space parallel port driver
[ 12.496265] HDA Intel 0000:80:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 12.496329] HDA Intel 0000:80:01.0: setting latency timer to 64
[ 12.496334] HDA Intel 0000:80:01.0: PCI: Disallowing DAC for device
[ 12.529900] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 12.688232] lp0: using parport0 (interrupt-driven).
[ 12.777595] Adding 2690848k swap on /dev/sda8. Priority:-1 extents:1 across:2690848k
[ 13.332334] EXT3 FS on sda5, internal journal
[ 14.073531] kjournald starting. Commit interval 5 seconds
[ 14.073662] EXT3 FS on sdb5, internal journal
[ 14.073667] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.252354] type=1505 audit(1236709902.681:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2673
[ 14.332987] type=1505 audit(1236709902.761:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2677
[ 14.333092] type=1505 audit(1236709902.761:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2677
[ 14.333136] type=1505 audit(1236709902.761:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2677
[ 14.333182] type=1505 audit(1236709902.761:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2677
[ 14.488779] type=1505 audit(1236709902.917:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2682
[ 14.488959] type=1505 audit(1236709902.917:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2682
[ 14.532157] type=1505 audit(1236709902.961:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2686
[ 15.088746] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[ 15.088749] apm: disabled - APM is not SMP safe.
[ 18.064635] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.064638] Bluetooth: BNEP filters: protocol multicast
[ 18.094350] Bridge firewalling registered
[ 24.571916] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 34.740005] eth0: no IPv6 routers present
[ 39.977864] warning: `pulseaudio' uses 32-bit capabilities (legacy support in use)
[ 40.910610] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
corrado@corrado-desktop:~$
Con o senza religione, i buoni si comportano bene e i cattivi male, ma ci vuole la religione per far comportare male i buoni.
(Steven Weinberg)
(Steven Weinberg)
-
corradoventu
- Imperturbabile Insigne
- Messaggi: 4002
- Iscrizione: domenica 27 aprile 2008, 22:23
- Desktop: GNOME
- Distribuzione: Ubuntu 22.04,23.10,24.04,24.10
- Sesso: Maschile
- Località: Rezzoaglio (GE)
- Contatti:
[Risolto] Re: [Desktop] browser non accede a /home
dopo l'ultimo aggiornamento la mia /home è ricomparsa
grazie comunque per l'aiuto
grazie comunque per l'aiuto
Con o senza religione, i buoni si comportano bene e i cattivi male, ma ci vuole la religione per far comportare male i buoni.
(Steven Weinberg)
(Steven Weinberg)
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 1 ospite