problema lettura microsd
-
dfluisa
- Prode Principiante
- Messaggi: 67
- Iscrizione: giovedì 25 settembre 2008, 15:34
- Località: Bruxelles
problema lettura microsd
Salve ragazzi,
premetto che ho gardato per bene le discussioni già postate che riguardano l'argomento e per un pò ho anche provato a smanettare da sola. :-[
Ma ho visto che la maggior parte riguardano soluzioni che cambiano in base a ciò che viene richiesto di postare dopo prove dal terminale, quindi credo proprio di aver bisogno di voi. :-\
Ho ubuntu 8.10.Inserisco la microsd (nell'adattatore), ma non succede nulla,il sistema proprio non la vede.Come posso fare??
Grazie per l'aiuto.
premetto che ho gardato per bene le discussioni già postate che riguardano l'argomento e per un pò ho anche provato a smanettare da sola. :-[
Ma ho visto che la maggior parte riguardano soluzioni che cambiano in base a ciò che viene richiesto di postare dopo prove dal terminale, quindi credo proprio di aver bisogno di voi. :-\
Ho ubuntu 8.10.Inserisco la microsd (nell'adattatore), ma non succede nulla,il sistema proprio non la vede.Come posso fare??
Grazie per l'aiuto.
...facendo un giretto qui nei dintorni, mi sento proprio una rapa curiosa!!!
-
dfluisa
- Prode Principiante
- Messaggi: 67
- Iscrizione: giovedì 25 settembre 2008, 15:34
- Località: Bruxelles
Re: problema lettura microsd
non mi può aiutare nessuno???vorrei spostare nel cellullare, ma non avendo il cavetto usb...non so davvero come fare...
>:(
>:(
...facendo un giretto qui nei dintorni, mi sento proprio una rapa curiosa!!!
- kapello
- Entusiasta Emergente

- Messaggi: 2135
- Iscrizione: lunedì 21 maggio 2007, 18:38
- Desktop: KDE
- Distribuzione: Kbuntu 13.10 amd64
- Località: Torino
- Contatti:
Re: problema lettura microsd
Prova a montarla manualmente. Dopo che l'hai inserita fai
sudo fdisk -l
che vediamo se il sistema la riconosce
sudo fdisk -l
che vediamo se il sistema la riconosce
Quando il saggio indica la luna, lo sciocco guarda il dito - L'esistenza dovrebbe essere sempre colma di bellezza ed emozioni, ma sarebbe ugualmente vuota, senza contenuti. - I miei racconti - Ubuntu user #27862
-
dfluisa
- Prode Principiante
- Messaggi: 67
- Iscrizione: giovedì 25 settembre 2008, 15:34
- Località: Bruxelles
Re: problema lettura microsd
ciao!
avevo già provato: era un esperimento provato prima della resa...ma nulla!!!
questo è ciò che ne viene fuori:
Disco /dev/sda: 60.0 GB, 60011642880 byte
255 heads, 63 sectors/track, 7296 cylinders
Units = cilindri of 16065 * 512 = 8225280 bytes
Disk identifier: 0xee8cee8c
Dispositivo Boot Start End Blocks Id System
/dev/sda1 1 3364 27021298+ 83 Linux
/dev/sda2 3365 7296 31583790 5 Esteso
/dev/sda5 3365 7128 30234298+ 83 Linux
/dev/sda6 7129 7296 1349428+ 82 Linux swap / Solaris
luisa@PuoDarcy:~$
grazie!
avevo già provato: era un esperimento provato prima della resa...ma nulla!!!
questo è ciò che ne viene fuori:
Disco /dev/sda: 60.0 GB, 60011642880 byte
255 heads, 63 sectors/track, 7296 cylinders
Units = cilindri of 16065 * 512 = 8225280 bytes
Disk identifier: 0xee8cee8c
Dispositivo Boot Start End Blocks Id System
/dev/sda1 1 3364 27021298+ 83 Linux
/dev/sda2 3365 7296 31583790 5 Esteso
/dev/sda5 3365 7128 30234298+ 83 Linux
/dev/sda6 7129 7296 1349428+ 82 Linux swap / Solaris
luisa@PuoDarcy:~$
grazie!
...facendo un giretto qui nei dintorni, mi sento proprio una rapa curiosa!!!
- kapello
- Entusiasta Emergente

- Messaggi: 2135
- Iscrizione: lunedì 21 maggio 2007, 18:38
- Desktop: KDE
- Distribuzione: Kbuntu 13.10 amd64
- Località: Torino
- Contatti:
Re: problema lettura microsd
Sembra non riconoscerla ... c'è solo l'hd. Prova a toglierla, rimetterla e posta
dmesg
mettilo tra tag code mi raccomando. Però se non la riconosce non so se io riesco ad aiutarti..
dmesg
mettilo tra tag code mi raccomando. Però se non la riconosce non so se io riesco ad aiutarti..
Quando il saggio indica la luna, lo sciocco guarda il dito - L'esistenza dovrebbe essere sempre colma di bellezza ed emozioni, ma sarebbe ugualmente vuota, senza contenuti. - I miei racconti - Ubuntu user #27862
-
dfluisa
- Prode Principiante
- Messaggi: 67
- Iscrizione: giovedì 25 settembre 2008, 15:34
- Località: Bruxelles
Re: problema lettura microsd
...cioè scusa da terminale devo inviare dmesg...tag code??scusami... :-[
...facendo un giretto qui nei dintorni, mi sento proprio una rapa curiosa!!!
- kapello
- Entusiasta Emergente

- Messaggi: 2135
- Iscrizione: lunedì 21 maggio 2007, 18:38
- Desktop: KDE
- Distribuzione: Kbuntu 13.10 amd64
- Località: Torino
- Contatti:
Re: problema lettura microsd
a terminale scrivi dmesg invio e poi riporti qui il risultato. Però nel post lo metti tra i tag code (la quarta icona da destra sopra le faccine, #) in modo da non fare un post lunghissimo!
Quando il saggio indica la luna, lo sciocco guarda il dito - L'esistenza dovrebbe essere sempre colma di bellezza ed emozioni, ma sarebbe ugualmente vuota, senza contenuti. - I miei racconti - Ubuntu user #27862
-
dfluisa
- Prode Principiante
- Messaggi: 67
- Iscrizione: giovedì 25 settembre 2008, 15:34
- Località: Bruxelles
Re: problema lettura microsd
Codice: Seleziona tutto
[ 18.102991] NET: Registered protocol family 20
[ 18.103051] AppArmor: AppArmor Filesystem Enabled
[ 18.106976] Time: tsc clocksource has been installed.
[ 18.115002] system 00:09: ioport range 0x480-0x48f has been reserved
[ 18.115005] system 00:09: ioport range 0x5c0-0x5cf has been reserved
[ 18.115014] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 18.115021] system 00:0c: iomem range 0xffc00000-0xffefffff has been reserved
[ 18.115026] system 00:0d: ioport range 0x540-0x55f has been reserved
[ 18.115029] system 00:0d: ioport range 0x400-0x47f has been reserved
[ 18.115032] system 00:0d: ioport range 0x480-0x48f has been reserved
[ 18.115035] system 00:0d: ioport range 0x500-0x53f has been reserved
[ 18.115038] system 00:0d: ioport range 0x4c0-0x4cf has been reserved
[ 18.115041] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
[ 18.115045] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 18.115051] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 18.115054] system 00:0e: iomem range 0xc0000-0xdffff could not be reserved
[ 18.115057] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 18.115060] system 00:0e: iomem range 0x100000-0x1fffffff could not be reserved
[ 18.115063] system 00:0e: iomem range 0x0-0x0 could not be reserved
[ 18.145433] PCI: Bridge: 0000:00:01.0
[ 18.145436] IO window: d000-dfff
[ 18.145440] MEM window: ff800000-ff8fffff
[ 18.145443] PREFETCH window: ce900000-de9fffff
[ 18.145458] PCI: Bus 3, cardbus bridge: 0000:02:01.0
[ 18.145460] IO window: 00001000-000010ff
[ 18.145464] IO window: 00001400-000014ff
[ 18.145468] PREFETCH window: 34000000-37ffffff
[ 18.145471] MEM window: 38000000-3bffffff
[ 18.145475] PCI: Bus 7, cardbus bridge: 0000:02:01.1
[ 18.145477] IO window: 00001800-000018ff
[ 18.145481] IO window: 00001c00-00001cff
[ 18.145484] PREFETCH window: 3c000000-3fffffff
[ 18.145488] MEM window: 40000000-43ffffff
[ 18.145492] PCI: Bridge: 0000:00:1e.0
[ 18.145493] IO window: disabled.
[ 18.145498] MEM window: ff900000-ff9fffff
[ 18.145502] PREFETCH window: dea00000-deafffff
[ 18.145516] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 18.145528] PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
[ 18.145811] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 4
[ 18.145814] PCI: setting IRQ 4 as level-triggered
[ 18.145817] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4
[ 18.145825] PCI: Setting latency timer of device 0000:02:01.0 to 64
[ 18.146104] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 18.146107] PCI: setting IRQ 11 as level-triggered
[ 18.146110] ACPI: PCI Interrupt 0000:02:01.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 18.146116] PCI: Setting latency timer of device 0000:02:01.1 to 64
[ 18.146127] NET: Registered protocol family 2
[ 18.182926] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 18.183123] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 18.183231] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 18.183343] TCP: Hash tables configured (established 16384 bind 16384)
[ 18.183345] TCP reno registered
[ 18.194964] checking if image is initramfs... it is
[ 18.646711] Switched to high resolution mode on CPU 0
[ 18.945345] Freeing initrd memory: 7311k freed
[ 18.946019] audit: initializing netlink socket (disabled)
[ 18.946039] audit(1237286347.392:1): initialized
[ 18.948228] VFS: Disk quotas dquot_6.5.1
[ 18.948314] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 18.948469] io scheduler noop registered
[ 18.948472] io scheduler anticipatory registered
[ 18.948474] io scheduler deadline registered
[ 18.948486] io scheduler cfq registered (default)
[ 18.948558] Boot video device is 0000:01:00.0
[ 18.948863] isapnp: Scanning for PnP cards...
[ 19.302169] isapnp: No Plug & Play device found
[ 19.330432] Real Time Clock Driver v1.12ac
[ 19.330556] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 19.330742] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 19.331282] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4
[ 19.331292] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 19.331954] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 19.332032] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 19.332133] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12
[ 19.334961] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 19.336119] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 19.336124] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 19.336127] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 19.336129] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 19.336132] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 19.345086] mice: PS/2 mouse device common for all mice
[ 19.345198] EISA: Probing bus 0 at eisa.0
[ 19.345207] Cannot allocate resource for EISA slot 1
[ 19.345235] EISA: Detected 0 cards.
[ 19.345239] cpuidle: using governor ladder
[ 19.345241] cpuidle: using governor menu
[ 19.345345] NET: Registered protocol family 1
[ 19.345372] Using IPI No-Shortcut mode
[ 19.345408] registered taskstats version 1
[ 19.345507] Magic number: 1:450:679
[ 19.345613] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 19.345615] EDD information not available.
[ 19.345893] Freeing unused kernel memory: 368k freed
[ 19.345922] Write protecting the kernel read-only data: 806k
[ 19.380976] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 20.549851] fuse init (API version 7.9)
[ 20.570279] ACPI: Invalid PBLK length [7]
[ 20.571099] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 20.579353] ACPI: Thermal Zone [THRM] (58 C)
[ 21.226145] usbcore: registered new interface driver usbfs
[ 21.226173] usbcore: registered new interface driver hub
[ 21.233409] usbcore: registered new device driver usb
[ 21.246052] USB Universal Host Controller Interface driver v3.0
[ 21.246120] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 21.246136] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 21.246140] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 21.246518] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 21.246544] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000e800
[ 21.246680] usb usb1: configuration #1 chosen from 1 choice
[ 21.246705] hub 1-0:1.0: USB hub found
[ 21.246710] hub 1-0:1.0: 2 ports detected
[ 21.310696] SCSI subsystem initialized
[ 21.350323] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[ 21.350329] PCI: setting IRQ 5 as level-triggered
[ 21.350333] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 21.350347] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 21.350351] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 21.350377] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 21.350404] uhci_hcd 0000:00:1d.1: irq 5, io base 0x0000e880
[ 21.350524] usb usb2: configuration #1 chosen from 1 choice
[ 21.350549] hub 2-0:1.0: USB hub found
[ 21.350555] hub 2-0:1.0: 2 ports detected
[ 21.401786] libata version 3.00 loaded.
[ 21.454156] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 21.454161] PCI: setting IRQ 10 as level-triggered
[ 21.454165] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 21.454179] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 21.454184] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 21.454210] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 21.454237] uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000ec00
[ 21.454351] usb usb3: configuration #1 chosen from 1 choice
[ 21.454374] hub 3-0:1.0: USB hub found
[ 21.454380] hub 3-0:1.0: 2 ports detected
[ 21.558085] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
[ 21.558091] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
[ 21.558106] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 21.558110] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 21.558136] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 21.562038] ehci_hcd 0000:00:1d.7: debug port 1
[ 21.562044] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 21.562052] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xffaffc00
[ 21.577507] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 21.577613] usb usb4: configuration #1 chosen from 1 choice
[ 21.577638] hub 4-0:1.0: USB hub found
[ 21.577645] hub 4-0:1.0: 6 ports detected
[ 21.681547] tg3.c:v3.86 (November 9, 2007)
[ 21.681577] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4
[ 21.731556] eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:17:31:3f:c9:93
[ 21.731563] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[ 21.731566] eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
[ 21.731587] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[ 21.731594] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 21.731633] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 21.731646] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 21.735667] ACPI: PCI Interrupt 0000:02:01.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 21.788324] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[ff9ef800-ff9effff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 21.799997] ata_piix 0000:00:1f.1: version 2.12
[ 21.800011] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 21.800048] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 21.800873] scsi0 : ata_piix
[ 21.801341] scsi1 : ata_piix
[ 21.802846] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 21.802849] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 21.965501] ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD4A, max UDMA/100
[ 21.965506] ata1.00: 117210240 sectors, multi 16: LBA48
[ 21.981336] ata1.00: configured for UDMA/100
[ 22.300789] ata2.00: ATAPI: MATSHITAUJ-831D, 1.00, max UDMA/33
[ 22.472453] ata2.00: configured for UDMA/33
[ 22.472593] scsi 0:0:0:0: Direct-Access ATA IC25N060ATMR04-0 MO3O PQ: 0 ANSI: 5
[ 22.474626] scsi 1:0:0:0: CD-ROM MATSHITA UJ-831D 1.00 PQ: 0 ANSI: 5
[ 22.487582] Driver 'sd' needs updating - please use bus_type methods
[ 22.487669] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 22.487682] sd 0:0:0:0: [sda] Write Protect is off
[ 22.487685] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.487701] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.487750] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 22.487760] sd 0:0:0:0: [sda] Write Protect is off
[ 22.487763] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.487779] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.487782] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 22.514811] sda1 sda2 < sda5 sda6 >
[ 22.554215] sd 0:0:0:0: [sda] Attached SCSI disk
[ 22.559876] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 22.559896] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 22.565260] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 22.565264] Uniform CD-ROM driver Revision: 3.20
[ 22.565313] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 22.871247] Attempting manual resume
[ 22.871251] swsusp: Resume From Partition 8:6
[ 22.871253] PM: Checking swsusp image.
[ 22.871403] PM: Resume from disk failed.
[ 22.914473] kjournald starting. Commit interval 5 seconds
[ 22.914483] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.067281] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000356eea1]
[ 39.392026] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 39.707579] intel_rng: FWH not detected
[ 39.736905] Linux agpgart interface v0.102
[ 39.792840] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 39.900666] agpgart: Detected an Intel 855PM Chipset.
[ 39.914280] agpgart: AGP aperture is 256M @ 0xe0000000
[ 40.048469] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 40.100319] iTCO_vendor_support: vendor-support=0
[ 40.156243] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 40.156331] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x0460)
[ 40.156362] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 40.292023] irda_init()
[ 40.292045] NET: Registered protocol family 23
[ 40.419894] parport_pc 00:08: reported by Plug and Play ACPI
[ 40.419993] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 40.551663] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[ 40.551692] nsc-ircc, chip->init
[ 40.551701] nsc-ircc, Found chip at base=0x02e
[ 40.551725] nsc-ircc, driver loaded (Dag Brattli)
[ 40.551730] nsc_ircc_open(), can't get iobase of 0x2f8
[ 40.551757] nsc-ircc, Found chip at base=0x02e
[ 40.551780] nsc-ircc, driver loaded (Dag Brattli)
[ 40.551782] nsc_ircc_open(), can't get iobase of 0x2f8
[ 40.552240] nsc-ircc 00:07: disabled
[ 40.703502] input: Power Button (FF) as /devices/virtual/input/input3
[ 40.715342] ACPI: Power Button (FF) [PWRF]
[ 40.715466] input: Lid Switch as /devices/virtual/input/input4
[ 40.715561] ACPI: Lid Switch [LID]
[ 40.715625] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 40.731302] ACPI: Sleep Button (CM) [SLPB]
[ 40.731367] input: Power Button (CM) as /devices/virtual/input/input6
[ 40.747279] ACPI: Power Button (CM) [PWRB]
[ 40.866050] ACPI: AC Adapter [AC] (on-line)
[ 41.255804] ACPI: Battery Slot [BAT0] (battery present)
[ 41.255883] ACPI: Battery Slot [BAT1] (battery absent)
[ 41.256012] asus-laptop: Asus Laptop Support version 0.42
[ 41.256140] asus-laptop: M6NE model detected
[ 41.264849] Registered led device: asus:mail
[ 42.177409] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0f/LNXVIDEO:00/input/input7
[ 42.189005] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 42.526723] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 42.875950] [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[ 42.875994] [fglrx] ASYNCIO init succeed!
[ 42.876529] [fglrx] PAT is enabled successfully!
[ 42.877550] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[ 42.951820] ieee80211_crypt: registered algorithm 'NULL'
[ 42.990011] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 42.990016] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 43.027737] Yenta: CardBus bridge found at 0000:02:01.0 [1043:1864]
[ 43.084107] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 43.084111] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 43.159733] Yenta: ISA IRQ mask 0x0008, PCI irq 4
[ 43.159739] Socket status: 30000006
[ 43.159741] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 43.159748] pcmcia: parent PCI bridge Memory window: 0xff900000 - 0xff9fffff
[ 43.159752] pcmcia: parent PCI bridge Memory window: 0xdea00000 - 0xdeafffff
[ 43.213230] Yenta: CardBus bridge found at 0000:02:01.1 [1043:1864]
[ 43.339446] Yenta: ISA IRQ mask 0x0008, PCI irq 11
[ 43.339451] Socket status: 30000006
[ 43.339453] Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
[ 43.339461] pcmcia: parent PCI bridge Memory window: 0xff900000 - 0xff9fffff
[ 43.339464] pcmcia: parent PCI bridge Memory window: 0xdea00000 - 0xdeafffff
[ 43.364646] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4
[ 43.415076] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 43.777157] Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0
[ 43.815130] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 45.086523] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[ 45.086580] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4
[ 45.086605] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 45.383699] cs: IO port probe 0x100-0x3af: clean.
[ 45.385466] cs: IO port probe 0x3e0-0x4ff: clean.
[ 45.385805] cs: IO port probe 0x820-0x8ff: clean.
[ 45.386429] cs: IO port probe 0xc00-0xcf7: clean.
[ 45.387214] cs: IO port probe 0xa00-0xaff: clean.
[ 45.388060] cs: IO port probe 0x100-0x3af: clean.
[ 45.389789] cs: IO port probe 0x3e0-0x4ff: clean.
[ 45.390127] cs: IO port probe 0x820-0x8ff: clean.
[ 45.390750] cs: IO port probe 0xc00-0xcf7: clean.
[ 45.391537] cs: IO port probe 0xa00-0xaff: clean.
[ 45.911144] intel8x0_measure_ac97_clock: measured 55460 usecs
[ 45.911147] intel8x0: clocking to 48000
[ 46.143388] lp0: using parport0 (interrupt-driven).
[ 46.222063] Adding 1349420k swap on /dev/sda6. Priority:-1 extents:1 across:1349420k
[ 46.760491] EXT3 FS on sda5, internal journal
[ 47.621368] kjournald starting. Commit interval 5 seconds
[ 47.621377] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 47.621634] EXT3 FS on sda1, internal journal
[ 47.621639] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.480787] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 49.047274] No dock devices found.
[ 49.064974] ACPI: \_SB_.PCI0.IDE0.CHN1.DRV0: found ejectable bay
[ 49.064983] ACPI: \_SB_.PCI0.IDE0.CHN1.DRV0: Adding notify handler
[ 49.065018] ACPI: Error installing bay notify handler
[ 49.065021] ACPI: Bay [\_SB_.PCI0.IDE0.CHN1.DRV0] Added
[ 50.379631] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 50.379636] apm: overridden by ACPI.
[ 50.726317] ppdev: user-space parallel port driver
[ 50.920210] audit(1237282780.890:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4986 profile="/usr/sbin/cupsd" namespace="default"
[ 102.317874] Marking TSC unstable due to: cpufreq changes.
[ 102.325824] Time: acpi_pm clocksource has been installed.
[ 136.982265] Clocksource tsc unstable (delta = -286482694 ns)
[ 51.696231] ttyS1: LSR safety check engaged!
[ 139.948295] Bluetooth: Core ver 2.11
[ 139.960872] NET: Registered protocol family 31
[ 139.960882] Bluetooth: HCI device and connection manager initialized
[ 139.960892] Bluetooth: HCI socket layer initialized
[ 139.997819] Bluetooth: L2CAP ver 2.9
[ 139.997829] Bluetooth: L2CAP socket layer initialized
[ 52.487490] Bluetooth: RFCOMM socket layer initialized
[ 52.487505] Bluetooth: RFCOMM TTY layer initialized
[ 52.487507] Bluetooth: RFCOMM ver 1.8
[ 53.621400] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 56.220598] [fglrx] Internal AGP support requested, but kernel AGP support active.
[ 56.220605] [fglrx] Have to use kernel AGP support to avoid conflicts.
[ 56.220609] [fglrx] AGP detected, AgpState = 0x1f000217 (hardware caps of chipset)
[ 56.221152] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 56.221299] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 56.221460] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 56.221624] [fglrx] AGP enabled, AgpCommand = 0x1f000314 (selected caps)
[ 56.225311] [fglrx] GART Table is not in FRAME_BUFFER range
[ 56.225319] [fglrx] Reserve Block - 0 offset = 0X0 length = 0X40000
[ 56.225322] [fglrx] Reserve Block - 1 offset = 0X3ff5000 length = 0Xb000
[ 56.334669] [fglrx] interrupt source 20008000 successfully enabled
[ 56.334677] [fglrx] enable ID = 0x00000004
[ 56.335010] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 56.335219] [fglrx] interrupt source 10000000 successfully enabled
[ 56.335223] [fglrx] enable ID = 0x00000005
[ 56.335485] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 174.071035] NET: Registered protocol family 10
[ 174.072168] lo: Disabled Privacy Extensions
[ 174.073501] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 174.074398] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 203.530044] NET: Registered protocol family 17
[ 122.613181] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 90.526872] eth1: no IPv6 routers present
[ 520.004588] ACPI: EC: missing OBF confirmation, don't expect it any longer.
[ 520.504380] ACPI: EC: missing write data confirmation, don't expect it any longer.
[ 7860.022673] pccard: PCMCIA card inserted into slot 0
[ 7860.022691] cs: memory probe 0xff900000-0xff9fffff: excluding 0xff900000-0xff90ffff 0xff9e0000-0xff9fffff
[ 7860.025641] pcmcia: registering new device pcmcia0.0
[ 2944.344946] 0.0: GetNextTuple: No more items
[ 2944.345141] pata_pcmcia: probe of 0.0 failed with error -12
[ 7862.763474] pccard: card ejected from slot 0
[ 7917.477220] pccard: PCMCIA card inserted into slot 0
[ 7917.477348] pcmcia: registering new device pcmcia0.0
[ 7917.477556] 0.0: GetNextTuple: No more items
[ 7917.477574] pata_pcmcia: probe of 0.0 failed with error -12
[ 7917.484217] 0.0: GetNextTuple: No more items
[ 7917.484569] pata_pcmcia: probe of 0.0 failed with error -12
[ 8073.637303] pccard: card ejected from slot 0
[ 8079.218276] pccard: PCMCIA card inserted into slot 0
[ 8079.218403] pcmcia: registering new device pcmcia0.0
[ 8079.218611] 0.0: GetNextTuple: No more items
[ 8079.218629] pata_pcmcia: probe of 0.0 failed with error -12
[ 8079.224123] 0.0: GetNextTuple: No more items
[ 8079.224451] pata_pcmcia: probe of 0.0 failed with error -12
[ 8100.755840] pccard: card ejected from slot 0
[ 8212.054887] pccard: PCMCIA card inserted into slot 0
[ 8212.055014] pcmcia: registering new device pcmcia0.0
[ 8212.055220] 0.0: GetNextTuple: No more items
[ 8212.055238] pata_pcmcia: probe of 0.0 failed with error -12
[ 8212.060787] 0.0: GetNextTuple: No more items
[ 8212.061115] pata_pcmcia: probe of 0.0 failed with error -12
[ 8215.552569] pccard: card ejected from slot 0
[ 8254.713339] pccard: PCMCIA card inserted into slot 0
[ 8254.713468] pcmcia: registering new device pcmcia0.0
[ 8254.713677] 0.0: GetNextTuple: No more items
[ 8254.713694] pata_pcmcia: probe of 0.0 failed with error -12
[ 8254.719216] 0.0: GetNextTuple: No more items
[ 8254.719549] pata_pcmcia: probe of 0.0 failed with error -12
[ 8335.816758] pccard: card ejected from slot 0
[ 8368.466070] cs: pcmcia_socket0: unable to apply power.
[ 8370.151444] pccard: PCMCIA card inserted into slot 0
[ 8370.151572] pcmcia: registering new device pcmcia0.0
[ 8370.151781] 0.0: GetNextTuple: No more items
[ 8370.151799] pata_pcmcia: probe of 0.0 failed with error -12
[ 8370.157413] 0.0: GetNextTuple: No more items
[ 8370.157747] pata_pcmcia: probe of 0.0 failed with error -12
[ 8812.170434] pccard: card ejected from slot 0
[ 8833.922072] pccard: PCMCIA card inserted into slot 0
[ 8833.922199] pcmcia: registering new device pcmcia0.0
[ 8833.922406] 0.0: GetNextTuple: No more items
[ 8833.922425] pata_pcmcia: probe of 0.0 failed with error -12
[ 8833.927965] 0.0: GetNextTuple: No more items
[ 8833.928292] pata_pcmcia: probe of 0.0 failed with error -12
[ 8860.105563] pccard: card ejected from slot 0
[ 8872.965775] pccard: PCMCIA card inserted into slot 0
[ 8872.965903] pcmcia: registering new device pcmcia0.0
[ 8872.966111] 0.0: GetNextTuple: No more items
[ 8872.966129] pata_pcmcia: probe of 0.0 failed with error -12
[ 8872.971704] 0.0: GetNextTuple: No more items
[ 8872.972033] pata_pcmcia: probe of 0.0 failed with error -12
[ 8884.710836] pccard: card ejected from slot 0
[ 8901.742356] pccard: PCMCIA card inserted into slot 0
[ 8901.742483] pcmcia: registering new device pcmcia0.0
[ 8901.742692] 0.0: GetNextTuple: No more items
[ 8901.742711] pata_pcmcia: probe of 0.0 failed with error -12
[ 8901.748369] 0.0: GetNextTuple: No more items
[ 8901.748699] pata_pcmcia: probe of 0.0 failed with error -12
[ 8944.799853] pccard: card ejected from slot 0
[ 8950.439284] pccard: PCMCIA card inserted into slot 0
[ 8950.439410] pcmcia: registering new device pcmcia0.0
[ 8950.439615] 0.0: GetNextTuple: No more items
[ 8950.439633] pata_pcmcia: probe of 0.0 failed with error -12
[ 8950.445270] 0.0: GetNextTuple: No more items
[ 8950.445608] pata_pcmcia: probe of 0.0 failed with error -12
[ 8966.232938] pccard: card ejected from slot 0
[ 8980.285936] pccard: PCMCIA card inserted into slot 0
[ 8980.286065] pcmcia: registering new device pcmcia0.0
[ 8980.286272] 0.0: GetNextTuple: No more items
[ 8980.286290] pata_pcmcia: probe of 0.0 failed with error -12
[ 8980.291918] 0.0: GetNextTuple: No more items
[ 8980.292258] pata_pcmcia: probe of 0.0 failed with error -12
[ 8982.423527] pccard: card ejected from slot 0
[ 8985.320111] pccard: PCMCIA card inserted into slot 0
[ 8985.320238] pcmcia: registering new device pcmcia0.0
[ 8985.320446] 0.0: GetNextTuple: No more items
[ 8985.320464] pata_pcmcia: probe of 0.0 failed with error -12
[ 8985.325983] 0.0: GetNextTuple: No more items
[ 8985.326310] pata_pcmcia: probe of 0.0 failed with error -12
[ 9009.816940] pccard: card ejected from slot 0
[ 9026.087678] pccard: PCMCIA card inserted into slot 0
[ 9026.087806] pcmcia: registering new device pcmcia0.0
[ 9026.088011] 0.0: GetNextTuple: No more items
[ 9026.088029] pata_pcmcia: probe of 0.0 failed with error -12
[ 9026.093582] 0.0: GetNextTuple: No more items
[ 9026.093915] pata_pcmcia: probe of 0.0 failed with error -12
[ 3404.531341] pccard: card ejected from slot 0
[12422.509630] pccard: PCMCIA card inserted into slot 0
[12422.509760] pcmcia: registering new device pcmcia0.0
[12422.509966] 0.0: GetNextTuple: No more items
[12422.509983] pata_pcmcia: probe of 0.0 failed with error -12
[12422.560536] 0.0: GetNextTuple: No more items
[12422.563266] pata_pcmcia: probe of 0.0 failed with error -12
[13558.670049] pccard: card ejected from slot 0
[13565.558676] pccard: PCMCIA card inserted into slot 0
[13565.558805] pcmcia: registering new device pcmcia0.0
[13565.559011] 0.0: GetNextTuple: No more items
[13565.559029] pata_pcmcia: probe of 0.0 failed with error -12
[13565.565718] 0.0: GetNextTuple: No more items
[13565.566063] pata_pcmcia: probe of 0.0 failed with error -12
[13972.941563] pccard: card ejected from slot 0
[13986.114139] pccard: PCMCIA card inserted into slot 0
[13986.114268] pcmcia: registering new device pcmcia0.0
[13986.114476] 0.0: GetNextTuple: No more items
[13986.114494] pata_pcmcia: probe of 0.0 failed with error -12
[13986.150191] 0.0: GetNextTuple: No more items
[13986.150559] pata_pcmcia: probe of 0.0 failed with error -12
...facendo un giretto qui nei dintorni, mi sento proprio una rapa curiosa!!!
- kapello
- Entusiasta Emergente

- Messaggi: 2135
- Iscrizione: lunedì 21 maggio 2007, 18:38
- Desktop: KDE
- Distribuzione: Kbuntu 13.10 amd64
- Località: Torino
- Contatti:
Re: problema lettura microsd
Hai provato un pò di volte a metterla e toglierla ... Comunque sembra riconoscere il lettore ma dà un errore quando inserisci la scheda.
Non so se si può fare qualcosa, bisogna fare una ricerca.., o che intervenga un "espertissimo" !!
Non so se si può fare qualcosa, bisogna fare una ricerca.., o che intervenga un "espertissimo" !!
Quando il saggio indica la luna, lo sciocco guarda il dito - L'esistenza dovrebbe essere sempre colma di bellezza ed emozioni, ma sarebbe ugualmente vuota, senza contenuti. - I miei racconti - Ubuntu user #27862
-
dfluisa
- Prode Principiante
- Messaggi: 67
- Iscrizione: giovedì 25 settembre 2008, 15:34
- Località: Bruxelles
Re: problema lettura microsd
Ho provato, ma nulla!
Ok, grazie comunque dell'aiuto.E montarla manualmente???sapresti farlo? :-[
Ok, grazie comunque dell'aiuto.E montarla manualmente???sapresti farlo? :-[
...facendo un giretto qui nei dintorni, mi sento proprio una rapa curiosa!!!
- kapello
- Entusiasta Emergente

- Messaggi: 2135
- Iscrizione: lunedì 21 maggio 2007, 18:38
- Desktop: KDE
- Distribuzione: Kbuntu 13.10 amd64
- Località: Torino
- Contatti:
Re: problema lettura microsd
Il problema è che finchè il dispositivo non viene riconosciuto correttamente non può essere montato, vediE montarla manualmente???
Dà questo errore quando inserisci la card ...[13986.114139] pccard: PCMCIA card inserted into slot 0
[13986.114268] pcmcia: registering new device pcmcia0.0
[13986.114476] 0.0: GetNextTuple: No more items
[13986.114494] pata_pcmcia: probe of 0.0 failed with error -12
[13986.150191] 0.0: GetNextTuple: No more items
[13986.150559] pata_pcmcia: probe of 0.0 failed with error -12
edit:
scusa mi sono espresso male non volevo dire di farlo, ma che l'avevi fatto !!Hai provato un pò di volte a metterla e toglierla ...
Quando il saggio indica la luna, lo sciocco guarda il dito - L'esistenza dovrebbe essere sempre colma di bellezza ed emozioni, ma sarebbe ugualmente vuota, senza contenuti. - I miei racconti - Ubuntu user #27862
-
dfluisa
- Prode Principiante
- Messaggi: 67
- Iscrizione: giovedì 25 settembre 2008, 15:34
- Località: Bruxelles
Re: problema lettura microsd
ok...grazie dell'aiuto...spero in qualcun altro...purtroppo non avendo in dotazione il cavo usb è l'unico modo per caricare la schedina e inserire qualcosa nel cellulare!!! :'(
grazie dell'aiuto!!
grazie dell'aiuto!!
...facendo un giretto qui nei dintorni, mi sento proprio una rapa curiosa!!!
- bancaldo
- Imperturbabile Insigne

- Messaggi: 2585
- Iscrizione: mercoledì 18 aprile 2007, 15:13
- Località: Bologna
- Contatti:
Re: problema lettura microsd
triplete!..."non vinciamo mai"...grazie Mou
Ubuntu User #27170 Linux User #489389
Ubuntu User #27170 Linux User #489389
-
dfluisa
- Prode Principiante
- Messaggi: 67
- Iscrizione: giovedì 25 settembre 2008, 15:34
- Località: Bruxelles
Re: problema lettura microsd
ecco:
luisa@PuoDarcy:~$ dmesg | tail
[15523.694634] 0.0: GetNextTuple: No more items
[15523.695007] pata_pcmcia: probe of 0.0 failed with error -12
[13038.514798] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[17564.621231] pccard: card ejected from slot 0
[17582.210770] pccard: PCMCIA card inserted into slot 0
[17582.210898] pcmcia: registering new device pcmcia0.0
[17582.211101] 0.0: GetNextTuple: No more items
[17582.211119] pata_pcmcia: probe of 0.0 failed with error -12
[17582.275073] 0.0: GetNextTuple: No more items
[17582.275414] pata_pcmcia: probe of 0.0 failed with error -12
luisa@PuoDarcy:~$ dmesg | tail
[15523.694634] 0.0: GetNextTuple: No more items
[15523.695007] pata_pcmcia: probe of 0.0 failed with error -12
[13038.514798] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[17564.621231] pccard: card ejected from slot 0
[17582.210770] pccard: PCMCIA card inserted into slot 0
[17582.210898] pcmcia: registering new device pcmcia0.0
[17582.211101] 0.0: GetNextTuple: No more items
[17582.211119] pata_pcmcia: probe of 0.0 failed with error -12
[17582.275073] 0.0: GetNextTuple: No more items
[17582.275414] pata_pcmcia: probe of 0.0 failed with error -12
...facendo un giretto qui nei dintorni, mi sento proprio una rapa curiosa!!!
- bancaldo
- Imperturbabile Insigne

- Messaggi: 2585
- Iscrizione: mercoledì 18 aprile 2007, 15:13
- Località: Bologna
- Contatti:
Re: problema lettura microsd
non la riconosce, ma il lettore di SD, viene riconosciuto come periferica?
posta il risultato
posta il risultato
Codice: Seleziona tutto
lspcitriplete!..."non vinciamo mai"...grazie Mou
Ubuntu User #27170 Linux User #489389
Ubuntu User #27170 Linux User #489389
-
dfluisa
- Prode Principiante
- Messaggi: 67
- Iscrizione: giovedì 25 settembre 2008, 15:34
- Località: Bruxelles
Re: problema lettura microsd
luisa@PuoDarcy:~$ lspci
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 21)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 21)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
02:01.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
02:01.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 04)
02:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
luisa@PuoDarcy:~$
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 21)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 21)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
02:01.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
02:01.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 04)
02:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
luisa@PuoDarcy:~$
...facendo un giretto qui nei dintorni, mi sento proprio una rapa curiosa!!!
- kapello
- Entusiasta Emergente

- Messaggi: 2135
- Iscrizione: lunedì 21 maggio 2007, 18:38
- Desktop: KDE
- Distribuzione: Kbuntu 13.10 amd64
- Località: Torino
- Contatti:
Re: problema lettura microsd
se può essere utile, nel dmesg c'era anche questo
Codice: Seleziona tutto
[ 43.027737] Yenta: CardBus bridge found at 0000:02:01.0 [1043:1864]
[ 43.213230] Yenta: CardBus bridge found at 0000:02:01.1 [1043:1864]
[ 43.339446] Yenta: ISA IRQ mask 0x0008, PCI irq 11
[ 43.339451] Socket status: 30000006
[ 43.339453] Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
[ 43.339461] pcmcia: parent PCI bridge Memory window: 0xff900000 - 0xff9fffff
[ 43.339464] pcmcia: parent PCI bridge Memory window: 0xdea00000 - 0xdeafffffQuando il saggio indica la luna, lo sciocco guarda il dito - L'esistenza dovrebbe essere sempre colma di bellezza ed emozioni, ma sarebbe ugualmente vuota, senza contenuti. - I miei racconti - Ubuntu user #27862
- kapello
- Entusiasta Emergente

- Messaggi: 2135
- Iscrizione: lunedì 21 maggio 2007, 18:38
- Desktop: KDE
- Distribuzione: Kbuntu 13.10 amd64
- Località: Torino
- Contatti:
Re: problema lettura microsd
Ho cercato un pò in rete e mi sembra di aver capito che può essere un bug del kernel. Non so se ho capito bene (il mio inglese non è fantastico), ma forse è solo un problema di hotplug. Quindi puoi provare a fare sta prova: spegni il pc, metti la card e accendi il pc. Poi posta un
sudo fdisk -l
sudo fdisk -l
Quando il saggio indica la luna, lo sciocco guarda il dito - L'esistenza dovrebbe essere sempre colma di bellezza ed emozioni, ma sarebbe ugualmente vuota, senza contenuti. - I miei racconti - Ubuntu user #27862
-
dfluisa
- Prode Principiante
- Messaggi: 67
- Iscrizione: giovedì 25 settembre 2008, 15:34
- Località: Bruxelles
Re: problema lettura microsd
ecco fatto:
Disco /dev/sda: 60.0 GB, 60011642880 byte
255 heads, 63 sectors/track, 7296 cylinders
Units = cilindri of 16065 * 512 = 8225280 bytes
Disk identifier: 0xee8cee8c
Dispositivo Boot Start End Blocks Id System
/dev/sda1 1 3364 27021298+ 83 Linux
/dev/sda2 3365 7296 31583790 5 Esteso
/dev/sda5 3365 7128 30234298+ 83 Linux
/dev/sda6 7129 7296 1349428+ 82 Linux swap / Solaris
luisa@PuoDarcy:~$
Disco /dev/sda: 60.0 GB, 60011642880 byte
255 heads, 63 sectors/track, 7296 cylinders
Units = cilindri of 16065 * 512 = 8225280 bytes
Disk identifier: 0xee8cee8c
Dispositivo Boot Start End Blocks Id System
/dev/sda1 1 3364 27021298+ 83 Linux
/dev/sda2 3365 7296 31583790 5 Esteso
/dev/sda5 3365 7128 30234298+ 83 Linux
/dev/sda6 7129 7296 1349428+ 82 Linux swap / Solaris
luisa@PuoDarcy:~$
...facendo un giretto qui nei dintorni, mi sento proprio una rapa curiosa!!!
- kapello
- Entusiasta Emergente

- Messaggi: 2135
- Iscrizione: lunedì 21 maggio 2007, 18:38
- Desktop: KDE
- Distribuzione: Kbuntu 13.10 amd64
- Località: Torino
- Contatti:
Re: problema lettura microsd
niente da fare.
Quando il saggio indica la luna, lo sciocco guarda il dito - L'esistenza dovrebbe essere sempre colma di bellezza ed emozioni, ma sarebbe ugualmente vuota, senza contenuti. - I miei racconti - Ubuntu user #27862
Chi c’è in linea
Visualizzano questa sezione: Majestic-12 [Bot], nick091, Velvettiere e 12 ospiti