lettore cd rw...

Riconoscimento, installazione e configurazione delle periferiche.
bloodynuker
Prode Principiante
Messaggi: 98
Iscrizione: giovedì 17 gennaio 2008, 12:44

lettore cd rw...

Messaggio da bloodynuker »

ciao a tutti,
ultimamente i miei 2 lettori cd/dvd di cui uno é anche un masterizzatore non funzionano. Cioé funzionano si, i cd e i dvd li leggono senza problemi, ma al momento che inserisco un cd vuoto nel masterizzatore non mi chiede più come all'inizio se voglio scrivere un cd o cosa.. e se provo a scrivere un cd con basero niente! non mi rileva il cd vuoto.. é urgente dovrei masterizzare un paio di distro da provare su un'altro pc..
grazie mille :) siete grandi!!
Avatar utente
neolinux
Rampante Reduce
Rampante Reduce
Messaggi: 5742
Iscrizione: giovedì 11 dicembre 2008, 21:52
Contatti:

Re: lettore cd rw...

Messaggio da neolinux »

bloodynuker ha scritto: ciao a tutti,
ultimamente i miei 2 lettori cd/dvd di cui uno é anche un masterizzatore non funzionano. Cioé funzionano si, i cd e i dvd li leggono senza problemi, ma al momento che inserisco un cd vuoto nel masterizzatore non mi chiede più come all'inizio se voglio scrivere un cd o cosa.. e se provo a scrivere un cd con basero niente! non mi rileva il cd vuoto.. é urgente dovrei masterizzare un paio di distro da provare su un'altro pc..
grazie mille :) siete grandi!!
Risorse/creazione cd dvd

Oppure serpentine, k3b da aggiungi rimuovi
bloodynuker
Prode Principiante
Messaggi: 98
Iscrizione: giovedì 17 gennaio 2008, 12:44

Re: lettore cd rw...

Messaggio da bloodynuker »

se avvio k3b mi dice così :

Codice: Seleziona tutto

bloody@bloody-desktop:~$ k3b
QSettings::sync: filename is null/empty
QSettings::sync: filename is null/empty
QSettings::sync: filename is null/empty
QSettings::sync: filename is null/empty
QSettings::sync: filename is null/empty
kbuildsycoca running...
QSettings::sync: filename is null/empty
QSettings::sync: filename is null/empty
QSettings::sync: filename is null/empty
QSettings::sync: filename is null/empty
QSettings::sync: filename is null/empty
(K3bDevice::HalConnection) initializing HAL >= 0.5
Mapping udi /org/freedesktop/Hal/devices/storage_model_DVD_ROM_GDR8163B to device /dev/scd0
/dev/scd0 resolved to /dev/scd0
/dev/scd0 is block device (0)
/dev/scd0 seems to be cdrom
bus: 0, id: 1, lun: 0
(K3bDevice::Device) /dev/scd0: init()
(K3bDevice::Device) /dev/scd0 feature: DVD+R
(K3bDevice::Device) /dev/scd0 feature: DVD+RW
(K3bDevice::ScsiCommand) failed: 
                           command:    MODE SENSE (5a)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        24
                           ascq:       0
(K3bDevice::Device) /dev/scd0: MODE SENSE length det failed.
(K3bDevice::ScsiCommand) failed: 
                           command:    MODE SENSE (5a)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        24
                           ascq:       0
(K3bDevice::Device) /dev/scd0: MODE SENSE with real length 65535 failed.
(K3bDevice::Device) /dev/scd0: modeSense 0x05 failed!
(K3bDevice::Device) /dev/scd0: Cannot check write modes.
(K3bDevice::ScsiCommand) failed: 
                           command:    MODE SENSE (5a)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        24
                           ascq:       0
(K3bDevice::Device) /dev/scd0: MODE SENSE length det failed.
(K3bDevice::ScsiCommand) failed: 
                           command:    MODE SENSE (5a)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        24
                           ascq:       0
(K3bDevice::Device) /dev/scd0: MODE SENSE with real length 65535 failed.
Devices:
------------------------------
Blockdevice:    /dev/scd0
Generic device: 
Vendor:         HL-DT-ST
Description:    DVD-ROM GDR8163B
Version:        0M26
Write speed:    0
Profiles:       DVD-ROM, CD-ROM
Read Cap:       DVD-ROM, DVD+RW, DVD+R, CD-ROM
Write Cap:      Errore
Writing modes:  Nessuno
Reader aliases: /dev/scd0
------------------------------

non capisco perché non mi trova il masterizzatore! eppure funzionava una volta con ubuntu
Avatar utente
neolinux
Rampante Reduce
Rampante Reduce
Messaggi: 5742
Iscrizione: giovedì 11 dicembre 2008, 21:52
Contatti:

Re: lettore cd rw...

Messaggio da neolinux »

Pochi giorni fa qualcuno ha risolto con Serpentine, altrimenti sarà un problema di librerie ed io non so cosa fare, io uso invece Risorse/cd dvd per i dati, a me va benissimo ;)
bloodynuker
Prode Principiante
Messaggi: 98
Iscrizione: giovedì 17 gennaio 2008, 12:44

Re: lettore cd rw...

Messaggio da bloodynuker »

neanche serpentine funziona.. non trova il masterizzatore...in ogni caso dovrei scrivere immagini iso .. forse potrebbe essere d'aiuto sapere che qualche volta é successo che ho dovuto staccare il "cavo" del masterizzatore e far partire ubuntu senza lettore cd.. forse si é Sconfigurato qualcosa.. in effetti in /dev/ non ce SCD1 che dovrebbe essere il masterizzatore.. ce solo scd0 che credo sia l'altro lettore.. in ogni caso manca scd1...
Avatar utente
Janvitus
Amministratore
Amministratore
Messaggi: 18787
Iscrizione: lunedì 25 aprile 2005, 15:52
Desktop: GNOME Shell / Xfce
Sesso: Maschile
Località: Potenza
Contatti:

Re: lettore cd rw...

Messaggio da Janvitus »

Riporta il contenuto di dmesg.
+Fedora 40 • +Xubuntu 24.04
bloodynuker
Prode Principiante
Messaggi: 98
Iscrizione: giovedì 17 gennaio 2008, 12:44

Re: lettore cd rw...

Messaggio da bloodynuker »

Codice: Seleziona tutto

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.27-11-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Jan 29 19:24:39 UTC 2009 (Ubuntu 2.6.27-11.27-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[    0.000000]  BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[    0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x100000
[    0.000000] kernel direct mapping tables up to 38000000 @ 10000-15000
[    0.000000] RAMDISK: 3782f000 - 37fef2fd
[    0.000000] ACPI: RSDP 000F7B70, 0024 (r2 Nvidia)
[    0.000000] ACPI: XSDT 7FEE30C0, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 7FEEC540, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 7FEE3240, 92A5 (r1 NVIDIA AWRDACPI     1000 MSFT  3000000)
[    0.000000] ACPI: FACS 7FEE0000, 0040
[    0.000000] ACPI: SSDT 7FEEC740, 02CC (r1 PTLTD  POWERNOW        1  LTP        1)
[    0.000000] ACPI: HPET 7FEECA80, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD       98)
[    0.000000] ACPI: MCFG 7FEECB00, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
[    0.000000] ACPI: APIC 7FEEC680, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
[    0.000000] 1150MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 38000000
[    0.000000]   low ram: 00000000 - 38000000
[    0.000000]   bootmap 00011000 - 00018000
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00005c29e0]    TEXT DATA BSS ==> [0000100000 - 00005c29e0]
[    0.000000]   #4 [003782f000 - 0037fef2fd]          RAMDISK ==> [003782f000 - 0037fef2fd]
[    0.000000]   #5 [00005c3000 - 00005c6000]    INIT_PG_TABLE ==> [00005c3000 - 00005c6000]
[    0.000000]   #6 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
[    0.000000]   #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
[    0.000000] found SMP MP-table at [c00f5b80] 000f5b80
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00038000
[    0.000000]   HighMem  0x00038000 -> 0x0007fee0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007fee0
[    0.000000] On node 0 totalpages: 523887
[    0.000000] free_area_init_node: node 0, pgdat c048c680, node_mem_map c1000240
[    0.000000]   DMA zone: 3947 pages, LIFO batch:0
[    0.000000]   Normal zone: 223300 pages, LIFO batch:31
[    0.000000]   HighMem zone: 292034 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000)
[    0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519281
[    0.000000] Kernel command line: root=UUID=1f67600c-e898-46fa-b78b-9bf833b273ec ro quiet splash 
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Extended CMOS year: 2000
[    0.000000] TSC: PIT calibration confirmed by PMTIMER.
[    0.000000] TSC: using PIT calibration value
[    0.000000] Detected 2812.920 MHz processor.
[    0.004000] spurious 8259A interrupt: IRQ7.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] Memory: 2062496k/2096000k available (2576k kernel code, 32200k reserved, 1165k data, 424k init, 1178496k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.004000]     vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    0.004000]       .init : 0xc04ad000 - 0xc0517000   ( 424 kB)
[    0.004000]       .data : 0xc03840da - 0xc04a7680   (1165 kB)
[    0.004000]       .text : 0xc0100000 - 0xc03840da   (2576 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.004000] hpet clockevent registered
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.84 BogoMIPS (lpj=11251680)
[    0.004000] Security Framework initialized
[    0.004000] SELinux:  Disabled at boot.
[    0.004000] AppArmor: AppArmor initialized
[    0.004000] Mount-cache hash table entries: 512
[    0.004000] Initializing cgroup subsys ns
[    0.004000] Initializing cgroup subsys cpuacct
[    0.004000] Initializing cgroup subsys memory
[    0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.004000] CPU 0(2) -> Core 0
[    0.004000] using C1E aware idle routine
[    0.004000] Checking 'hlt' instruction... OK.
[    0.017150] ACPI: Core revision 20080609
[    0.019985] ACPI: Checking initramfs for custom DSDT
[    0.264289] ENABLING IO-APIC IRQs
[    0.264492] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.304982] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03
[    0.308019] Booting processor 1/1 ip 6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 5625.96 BogoMIPS (lpj=11251926)
[    0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.004000] CPU 1(2) -> Core 1
[    0.392233] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03
[    0.392254] Brought up 2 CPUs
[    0.392256] Total of 2 processors activated (11251.80 BogoMIPS).
[    0.392290] CPU0 attaching sched-domain:
[    0.392292]  domain 0: span 0-1 level CPU
[    0.392294]   groups: 0 1
[    0.392298] CPU1 attaching sched-domain:
[    0.392300]  domain 0: span 0-1 level CPU
[    0.392302]   groups: 1 0
[    0.392350] net_namespace: 840 bytes
[    0.392350] Booting paravirtualized kernel on bare hardware
[    0.392350] Time: 10:48:23  Date: 03/24/09
[    0.392350] NET: Registered protocol family 16
[    0.392350] EISA bus registered
[    0.392350] ACPI: bus type pci registered
[    0.392350] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[    0.392350] PCI: MCFG area at f0000000 reserved in E820
[    0.392350] PCI: Using MMCONFIG for extended config space
[    0.392350] PCI: Using configuration type 1 for base access
[    0.392979] ACPI: EC: Look up EC in DSDT
[    0.405262] ACPI: Interpreter enabled
[    0.405265] ACPI: (supports S0 S1 S3 S4 S5)
[    0.405277] ACPI: Using IOAPIC for interrupt routing
[    0.416067] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.416182] PCI: 0000:00:01.1 reg 10 io port: [fc00, fc3f]
[    0.416192] PCI: 0000:00:01.1 reg 20 io port: [1c00, 1c3f]
[    0.416195] PCI: 0000:00:01.1 reg 24 io port: [1c40, 1c7f]
[    0.416209] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.416215] pci 0000:00:01.1: PME# disabled
[    0.416249] PCI: 0000:00:02.0 reg 10 32bit mmio: [fe02f000, fe02ffff]
[    0.416265] pci 0000:00:02.0: supports D1
[    0.416266] pci 0000:00:02.0: supports D2
[    0.416267] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.416270] pci 0000:00:02.0: PME# disabled
[    0.416283] PCI: 0000:00:02.1 reg 10 32bit mmio: [fe02e000, fe02e0ff]
[    0.416298] pci 0000:00:02.1: supports D1
[    0.416299] pci 0000:00:02.1: supports D2
[    0.416300] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.416303] pci 0000:00:02.1: PME# disabled
[    0.416321] PCI: 0000:00:04.0 reg 20 io port: [f000, f00f]
[    0.416340] PCI: 0000:00:05.0 reg 10 io port: [9f0, 9f7]
[    0.416343] PCI: 0000:00:05.0 reg 14 io port: [bf0, bf3]
[    0.416346] PCI: 0000:00:05.0 reg 18 io port: [970, 977]
[    0.416349] PCI: 0000:00:05.0 reg 1c io port: [b70, b73]
[    0.416352] PCI: 0000:00:05.0 reg 20 io port: [dc00, dc0f]
[    0.416355] PCI: 0000:00:05.0 reg 24 32bit mmio: [fe02d000, fe02dfff]
[    0.416374] PCI: 0000:00:05.1 reg 10 io port: [9e0, 9e7]
[    0.416377] PCI: 0000:00:05.1 reg 14 io port: [be0, be3]
[    0.416380] PCI: 0000:00:05.1 reg 18 io port: [960, 967]
[    0.416383] PCI: 0000:00:05.1 reg 1c io port: [b60, b63]
[    0.416386] PCI: 0000:00:05.1 reg 20 io port: [c800, c80f]
[    0.416389] PCI: 0000:00:05.1 reg 24 32bit mmio: [fe02c000, fe02cfff]
[    0.416410] PCI: 0000:00:05.2 reg 10 io port: [c400, c407]
[    0.416413] PCI: 0000:00:05.2 reg 14 io port: [c000, c003]
[    0.416416] PCI: 0000:00:05.2 reg 18 io port: [bc00, bc07]
[    0.416419] PCI: 0000:00:05.2 reg 1c io port: [b800, b803]
[    0.416422] PCI: 0000:00:05.2 reg 20 io port: [b400, b40f]
[    0.416425] PCI: 0000:00:05.2 reg 24 32bit mmio: [fe02b000, fe02bfff]
[    0.416463] PCI: 0000:00:06.1 reg 10 32bit mmio: [fe020000, fe023fff]
[    0.416480] pci 0000:00:06.1: PME# supported from D3hot D3cold
[    0.416482] pci 0000:00:06.1: PME# disabled
[    0.416505] PCI: 0000:00:08.0 reg 10 32bit mmio: [fe02a000, fe02afff]
[    0.416509] PCI: 0000:00:08.0 reg 14 io port: [b000, b007]
[    0.416512] PCI: 0000:00:08.0 reg 18 32bit mmio: [fe029000, fe0290ff]
[    0.416515] PCI: 0000:00:08.0 reg 1c 32bit mmio: [fe028000, fe02800f]
[    0.416528] pci 0000:00:08.0: supports D1
[    0.416529] pci 0000:00:08.0: supports D2
[    0.416531] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.416534] pci 0000:00:08.0: PME# disabled
[    0.416553] PCI: 0000:00:09.0 reg 10 32bit mmio: [fe027000, fe027fff]
[    0.416556] PCI: 0000:00:09.0 reg 14 io port: [ac00, ac07]
[    0.416559] PCI: 0000:00:09.0 reg 18 32bit mmio: [fe026000, fe0260ff]
[    0.416562] PCI: 0000:00:09.0 reg 1c 32bit mmio: [fe025000, fe02500f]
[    0.416576] pci 0000:00:09.0: supports D1
[    0.416577] pci 0000:00:09.0: supports D2
[    0.416578] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.416582] pci 0000:00:09.0: PME# disabled
[    0.416601] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.416603] pci 0000:00:0a.0: PME# disabled
[    0.416621] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.416623] pci 0000:00:0b.0: PME# disabled
[    0.416640] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.416642] pci 0000:00:0c.0: PME# disabled
[    0.416660] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.416662] pci 0000:00:0d.0: PME# disabled
[    0.416680] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.416682] pci 0000:00:0e.0: PME# disabled
[    0.416699] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.416701] pci 0000:00:0f.0: PME# disabled
[    0.416774] PCI: 0000:01:0b.0 reg 10 32bit mmio: [fdeff000, fdeff7ff]
[    0.416778] PCI: 0000:01:0b.0 reg 14 32bit mmio: [fdef8000, fdefbfff]
[    0.416799] pci 0000:01:0b.0: supports D1
[    0.416800] pci 0000:01:0b.0: supports D2
[    0.416802] pci 0000:01:0b.0: PME# supported from D0 D1 D2 D3hot
[    0.416804] pci 0000:01:0b.0: PME# disabled
[    0.416819] pci 0000:00:06.0: transparent bridge
[    0.416822] PCI: bridge 0000:00:06.0 32bit mmio: [fde00000, fdefffff]
[    0.416981] PCI: 0000:06:00.0 reg 24 32bit mmio: [fddfe000, fddfffff]
[    0.416987] PCI: 0000:06:00.0 reg 30 32bit mmio: [fdde0000, fddeffff]
[    0.417002] pci 0000:06:00.0: PME# supported from D3hot
[    0.417006] pci 0000:06:00.0: PME# disabled
[    0.417031] PCI: 0000:06:00.1 reg 10 io port: [9c00, 9c07]
[    0.417037] PCI: 0000:06:00.1 reg 14 io port: [9800, 9803]
[    0.417043] PCI: 0000:06:00.1 reg 18 io port: [9400, 9407]
[    0.417050] PCI: 0000:06:00.1 reg 1c io port: [9000, 9003]
[    0.417056] PCI: 0000:06:00.1 reg 20 io port: [8c00, 8c0f]
[    0.417106] PCI: bridge 0000:00:0e.0 io port: [8000, 9fff]
[    0.417109] PCI: bridge 0000:00:0e.0 32bit mmio: [fdd00000, fddfffff]
[    0.417127] PCI: 0000:07:00.0 reg 10 32bit mmio: [fa000000, faffffff]
[    0.417133] PCI: 0000:07:00.0 reg 14 64bit mmio: [e0000000, efffffff]
[    0.417139] PCI: 0000:07:00.0 reg 1c 64bit mmio: [f8000000, f9ffffff]
[    0.417143] PCI: 0000:07:00.0 reg 24 io port: [7c00, 7c7f]
[    0.417146] PCI: 0000:07:00.0 reg 30 32bit mmio: [fbfe0000, fbffffff]
[    0.417177] PCI: bridge 0000:00:0f.0 io port: [7000, 7fff]
[    0.417179] PCI: bridge 0000:00:0f.0 32bit mmio: [f8000000, fbffffff]
[    0.417182] PCI: bridge 0000:00:0f.0 64bit mmio pref: [e0000000, efffffff]
[    0.417192] bus 00 -> node 0
[    0.417198] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.417582] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.485204] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.485204] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.485204] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.485204] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.485204] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.485228] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15)
[    0.485434] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)
[    0.485639] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.485845] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.486052] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[    0.486257] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[    0.488034] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15)
[    0.488241] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[    0.488447] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.488654] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[    0.488861] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[    0.489067] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.489280] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
[    0.489487] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
[    0.489694] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
[    0.489941] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[    0.490178] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[    0.490420] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.490662] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[    0.490899] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[    0.491143] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[    0.491379] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[    0.491621] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[    0.491858] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[    0.492103] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[    0.492340] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
[    0.492582] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[    0.492820] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[    0.493062] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[    0.493299] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[    0.493541] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[    0.493779] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.494022] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.494259] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[    0.494502] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
[    0.494567] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.494567] pnp: PnP ACPI init
[    0.494567] ACPI: bus type pnp registered
[    0.500684] pnp: PnP ACPI: found 12 devices
[    0.500684] ACPI: ACPI bus type pnp unregistered
[    0.500684] PnPBIOS: Disabled by ACPI PNP
[    0.500684] PCI: Using ACPI for IRQ routing
[    0.508038] NET: Registered protocol family 8
[    0.508040] NET: Registered protocol family 20
[    0.508061] NetLabel: Initializing
[    0.508063] NetLabel:  domain hash size = 128
[    0.508064] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.508074] NetLabel:  unlabeled traffic allowed by default
[    0.508081] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[    0.508085] hpet0: 3 32-bit timers, 25000000 Hz
[    0.509547] tracer: 772 pages allocated for 65536 entries of 48 bytes
[    0.509548]    actual entries 65620
[    0.509656] AppArmor: AppArmor Filesystem Enabled
[    0.509679] ACPI: RTC can wake from S4
[    0.512042] Switched to high resolution mode on CPU 0
[    0.512274] Switched to high resolution mode on CPU 1
[    0.516024] system 00:01: ioport range 0x1000-0x107f has been reserved
[    0.516026] system 00:01: ioport range 0x1080-0x10ff has been reserved
[    0.516031] system 00:01: ioport range 0x1400-0x147f has been reserved
[    0.516033] system 00:01: ioport range 0x1480-0x14ff has been reserved
[    0.516035] system 00:01: ioport range 0x1800-0x187f has been reserved
[    0.516037] system 00:01: ioport range 0x1880-0x18ff has been reserved
[    0.516042] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    0.516044] system 00:02: ioport range 0x800-0x87f has been reserved
[    0.516046] system 00:02: ioport range 0x290-0x297 has been reserved
[    0.516054] system 00:0a: iomem range 0xf0000000-0xf3ffffff could not be reserved
[    0.516058] system 00:0b: iomem range 0xd2800-0xd3fff has been reserved
[    0.516060] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
[    0.516063] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
[    0.516065] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
[    0.516067] system 00:0b: iomem range 0xfefff000-0xfefff0ff could not be reserved
[    0.516070] system 00:0b: iomem range 0x7fee0000-0x7fefffff could not be reserved
[    0.516072] system 00:0b: iomem range 0xffff0000-0xffffffff could not be reserved
[    0.516075] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[    0.516077] system 00:0b: iomem range 0x100000-0x7fedffff could not be reserved
[    0.516079] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.516082] system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
[    0.516084] system 00:0b: iomem range 0xfefff000-0xfeffffff could not be reserved
[    0.516087] system 00:0b: iomem range 0xfff80000-0xfff80fff could not be reserved
[    0.516089] system 00:0b: iomem range 0xfff90000-0xfffbffff could not be reserved
[    0.516092] system 00:0b: iomem range 0xfffed000-0xfffeffff could not be reserved
[    0.551202] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
[    0.551204] pci 0000:00:06.0:   IO window: disabled
[    0.551207] pci 0000:00:06.0:   MEM window: 0xfde00000-0xfdefffff
[    0.551209] pci 0000:00:06.0:   PREFETCH window: disabled
[    0.551212] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
[    0.551214] pci 0000:00:0a.0:   IO window: disabled
[    0.551216] pci 0000:00:0a.0:   MEM window: disabled
[    0.551218] pci 0000:00:0a.0:   PREFETCH window: disabled
[    0.551220] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
[    0.551222] pci 0000:00:0b.0:   IO window: disabled
[    0.551224] pci 0000:00:0b.0:   MEM window: disabled
[    0.551226] pci 0000:00:0b.0:   PREFETCH window: disabled
[    0.551229] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
[    0.551230] pci 0000:00:0c.0:   IO window: disabled
[    0.551232] pci 0000:00:0c.0:   MEM window: disabled
[    0.551234] pci 0000:00:0c.0:   PREFETCH window: disabled
[    0.551237] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05
[    0.551238] pci 0000:00:0d.0:   IO window: disabled
[    0.551241] pci 0000:00:0d.0:   MEM window: disabled
[    0.551243] pci 0000:00:0d.0:   PREFETCH window: disabled
[    0.551245] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:06
[    0.551247] pci 0000:00:0e.0:   IO window: 0x8000-0x9fff
[    0.551250] pci 0000:00:0e.0:   MEM window: 0xfdd00000-0xfddfffff
[    0.551252] pci 0000:00:0e.0:   PREFETCH window: disabled
[    0.551255] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:07
[    0.551257] pci 0000:00:0f.0:   IO window: 0x7000-0x7fff
[    0.551259] pci 0000:00:0f.0:   MEM window: 0xf8000000-0xfbffffff
[    0.551261] pci 0000:00:0f.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
[    0.551268] pci 0000:00:06.0: setting latency timer to 64
[    0.551272] pci 0000:00:0a.0: setting latency timer to 64
[    0.551276] pci 0000:00:0b.0: setting latency timer to 64
[    0.551280] pci 0000:00:0c.0: setting latency timer to 64
[    0.551284] pci 0000:00:0d.0: setting latency timer to 64
[    0.551287] pci 0000:00:0e.0: setting latency timer to 64
[    0.551291] pci 0000:00:0f.0: setting latency timer to 64
[    0.551293] bus: 00 index 0 io port: [0, ffff]
[    0.551295] bus: 00 index 1 mmio: [0, ffffffff]
[    0.551297] bus: 01 index 0 mmio: [0, 0]
[    0.551298] bus: 01 index 1 mmio: [fde00000, fdefffff]
[    0.551300] bus: 01 index 2 mmio: [0, 0]
[    0.551301] bus: 01 index 3 io port: [0, ffff]
[    0.551303] bus: 01 index 4 mmio: [0, ffffffff]
[    0.551304] bus: 02 index 0 mmio: [0, 0]
[    0.551306] bus: 02 index 1 mmio: [0, 0]
[    0.551307] bus: 02 index 2 mmio: [0, 0]
[    0.551309] bus: 02 index 3 mmio: [0, 0]
[    0.551310] bus: 03 index 0 mmio: [0, 0]
[    0.551311] bus: 03 index 1 mmio: [0, 0]
[    0.551313] bus: 03 index 2 mmio: [0, 0]
[    0.551314] bus: 03 index 3 mmio: [0, 0]
[    0.551316] bus: 04 index 0 mmio: [0, 0]
[    0.551317] bus: 04 index 1 mmio: [0, 0]
[    0.551318] bus: 04 index 2 mmio: [0, 0]
[    0.551320] bus: 04 index 3 mmio: [0, 0]
[    0.551321] bus: 05 index 0 mmio: [0, 0]
[    0.551323] bus: 05 index 1 mmio: [0, 0]
[    0.551324] bus: 05 index 2 mmio: [0, 0]
[    0.551325] bus: 05 index 3 mmio: [0, 0]
[    0.551327] bus: 06 index 0 io port: [8000, 9fff]
[    0.551329] bus: 06 index 1 mmio: [fdd00000, fddfffff]
[    0.551330] bus: 06 index 2 mmio: [0, 0]
[    0.551332] bus: 06 index 3 mmio: [0, 0]
[    0.551333] bus: 07 index 0 io port: [7000, 7fff]
[    0.551335] bus: 07 index 1 mmio: [f8000000, fbffffff]
[    0.551336] bus: 07 index 2 mmio: [e0000000, efffffff]
[    0.551338] bus: 07 index 3 mmio: [0, 0]
[    0.551347] NET: Registered protocol family 2
[    0.564046] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.564260] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.564802] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.565059] TCP: Hash tables configured (established 131072 bind 65536)
[    0.565061] TCP reno registered
[    0.572070] NET: Registered protocol family 1
[    0.572163] checking if image is initramfs... it is
[    1.067945] Freeing initrd memory: 7936k freed
[    1.068763] audit: initializing netlink socket (disabled)
[    1.068780] type=2000 audit(1237891703.068:1): initialized
[    1.073115] highmem bounce pool size: 64 pages
[    1.073119] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.075204] VFS: Disk quotas dquot_6.5.1
[    1.075275] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.075357] msgmni has been set to 1743
[    1.075450] io scheduler noop registered
[    1.075452] io scheduler anticipatory registered
[    1.075453] io scheduler deadline registered
[    1.075462] io scheduler cfq registered (default)
[    1.089064] pci 0000:00:05.0: Enabling HT MSI Mapping
[    1.089078] pci 0000:00:05.1: Enabling HT MSI Mapping
[    1.089092] pci 0000:00:05.2: Enabling HT MSI Mapping
[    1.089105] pci 0000:00:06.0: Enabling HT MSI Mapping
[    1.089120] pci 0000:00:06.1: Enabling HT MSI Mapping
[    1.089136] pci 0000:00:08.0: Enabling HT MSI Mapping
[    1.089151] pci 0000:00:09.0: Enabling HT MSI Mapping
[    1.089165] pci 0000:00:0a.0: Enabling HT MSI Mapping
[    1.089179] pci 0000:00:0b.0: Enabling HT MSI Mapping
[    1.089194] pci 0000:00:0c.0: Enabling HT MSI Mapping
[    1.089208] pci 0000:00:0d.0: Enabling HT MSI Mapping
[    1.089223] pci 0000:00:0e.0: Enabling HT MSI Mapping
[    1.089237] pci 0000:00:0f.0: Enabling HT MSI Mapping
[    1.089259] pci 0000:07:00.0: Boot video device
[    1.089356] pcieport-driver 0000:00:0a.0: setting latency timer to 64
[    1.089376] pcieport-driver 0000:00:0a.0: found MSI capability
[    1.089393] pci_express 0000:00:0a.0:pcie00: allocate port service
[    1.089431] pci_express 0000:00:0a.0:pcie03: allocate port service

ecco la prima parte
bloodynuker
Prode Principiante
Messaggi: 98
Iscrizione: giovedì 17 gennaio 2008, 12:44

Re: lettore cd rw...

Messaggio da bloodynuker »

Codice: Seleziona tutto

[    1.089494] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[    1.089513] pcieport-driver 0000:00:0b.0: found MSI capability
[    1.089526] pci_express 0000:00:0b.0:pcie00: allocate port service
[    1.089566] pci_express 0000:00:0b.0:pcie03: allocate port service
[    1.089628] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[    1.089646] pcieport-driver 0000:00:0c.0: found MSI capability
[    1.089660] pci_express 0000:00:0c.0:pcie00: allocate port service
[    1.089698] pci_express 0000:00:0c.0:pcie03: allocate port service
[    1.089760] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[    1.089778] pcieport-driver 0000:00:0d.0: found MSI capability
[    1.089791] pci_express 0000:00:0d.0:pcie00: allocate port service
[    1.089827] pci_express 0000:00:0d.0:pcie03: allocate port service
[    1.089890] pcieport-driver 0000:00:0e.0: setting latency timer to 64
[    1.089908] pcieport-driver 0000:00:0e.0: found MSI capability
[    1.089921] pci_express 0000:00:0e.0:pcie00: allocate port service
[    1.089957] pci_express 0000:00:0e.0:pcie03: allocate port service
[    1.090019] pcieport-driver 0000:00:0f.0: setting latency timer to 64
[    1.090037] pcieport-driver 0000:00:0f.0: found MSI capability
[    1.090051] pci_express 0000:00:0f.0:pcie00: allocate port service
[    1.090087] pci_express 0000:00:0f.0:pcie03: allocate port service
[    1.090365] isapnp: Scanning for PnP cards...
[    1.442757] isapnp: No Plug & Play device found
[    1.469627] hpet_resources: 0xfefff000 is busy
[    1.469708] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.469821] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.470358] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.471899] brd: module loaded
[    1.471959] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    1.472094] PNP: No PS/2 controller found. Probing ports directly.
[    1.472426] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.472430] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.477112] mice: PS/2 mouse device common for all mice
[    1.477212] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.477241] rtc0: alarms up to one year, y3k, hpet irqs
[    1.477343] EISA: Probing bus 0 at eisa.0
[    1.477348] Cannot allocate resource for EISA slot 1
[    1.477361] Cannot allocate resource for EISA slot 7
[    1.477362] Cannot allocate resource for EISA slot 8
[    1.477364] EISA: Detected 0 cards.
[    1.477366] cpuidle: using governor ladder
[    1.477368] cpuidle: using governor menu
[    1.477751] TCP cubic registered
[    1.477771] Using IPI No-Shortcut mode
[    1.477917] registered taskstats version 1
[    1.478039]   Magic number: 1:631:831
[    1.478101] tty ptyqe: hash matches
[    1.478175] rtc_cmos 00:05: setting system clock to 2009-03-24 10:48:24 UTC (1237891704)
[    1.478177] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.478179] EDD information not available.
[    1.478433] Freeing unused kernel memory: 424k freed
[    1.478479] Write protecting the kernel text: 2580k
[    1.478509] Write protecting the kernel read-only data: 940k
[    1.683566] fuse init (API version 7.9)
[    1.780874] fan PNP0C0B:00: registered as cooling_device0
[    1.780880] ACPI: Fan [FAN] (on)
[    1.789156] processor ACPI0007:00: registered as cooling_device1
[    1.789202] processor ACPI0007:01: registered as cooling_device2
[    1.792283] thermal LNXTHERM:01: registered as thermal_zone0
[    1.792662] ACPI: Thermal Zone [THRM] (40 C)
[    2.212521] usbcore: registered new interface driver usbfs
[    2.212540] usbcore: registered new interface driver hub
[    2.220333] usbcore: registered new device driver usb
[    2.231720] No dock devices found.
[    2.253735] SCSI subsystem initialized
[    2.257965] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.258418] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[    2.258428] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[    2.258439] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    2.258441] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    2.258480] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    2.258500] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[    2.313020] libata version 3.00 loaded.
[    2.314169] usb usb1: configuration #1 chosen from 1 choice
[    2.314198] hub 1-0:1.0: USB hub found
[    2.314208] hub 1-0:1.0: 10 ports detected
[    2.321063] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    2.521883] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[    2.521909] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[    2.521928] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    2.521934] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    2.521953] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[    2.522028] ehci_hcd 0000:00:02.1: debug port 1
[    2.522042] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    2.522075] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
[    2.696020] usb 1-2: new full speed USB device using ohci_hcd and address 2
[    2.709013] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    2.709154] usb usb2: configuration #1 chosen from 1 choice
[    2.709175] hub 2-0:1.0: USB hub found
[    2.709183] hub 2-0:1.0: 10 ports detected
[    2.765046] hub 1-0:1.0: unable to enumerate USB device on port 2
[    2.917199] pata_amd 0000:00:04.0: version 0.3.10
[    2.917237] pata_amd 0000:00:04.0: setting latency timer to 64
[    2.917335] scsi0 : pata_amd
[    2.917554] scsi1 : pata_amd
[    2.918231] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    2.918233] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    3.094209] ata1.01: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0M26, max UDMA/66
[    3.094222] ata1: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc50000) ACPI=0x1f01f (600:30:0x1c)
[    3.126220] ata1.01: configured for UDMA/66
[    3.126306] ata2: port disabled. ignoring.
[    3.129583] scsi 0:0:1:0: CD-ROM            HL-DT-ST DVD-ROM GDR8163B 0M26 PQ: 0 ANSI: 5
[    3.129649] sata_nv 0000:00:05.0: version 3.5
[    3.130062] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[    3.130086] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
[    3.130089] sata_nv 0000:00:05.0: Using SWNCQ mode
[    3.130165] sata_nv 0000:00:05.0: setting latency timer to 64
[    3.130624] scsi2 : sata_nv
[    3.130839] scsi3 : sata_nv
[    3.131002] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21
[    3.131008] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21
[    3.500030] usb 2-3: new high speed USB device using ehci_hcd and address 3
[    3.633327] usb 2-3: configuration #1 chosen from 1 choice
[    3.752438] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[    3.752447] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
[    3.752449] sata_nv 0000:00:05.1: Using SWNCQ mode
[    3.752480] sata_nv 0000:00:05.1: setting latency timer to 64
[    3.752589] scsi4 : sata_nv
[    3.752886] scsi5 : sata_nv
[    3.753051] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20
[    3.753054] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20
[    4.048014] usb 1-2: new full speed USB device using ohci_hcd and address 3
[    4.260285] usb 1-2: configuration #1 chosen from 1 choice
[    4.263173] hub 1-2:1.0: USB hub found
[    4.266032] hub 1-2:1.0: 4 ports detected
[    4.376441] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23
[    4.376445] sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 23 (level, low) -> IRQ 23
[    4.376447] sata_nv 0000:00:05.2: Using SWNCQ mode
[    4.376480] sata_nv 0000:00:05.2: setting latency timer to 64
[    4.376584] scsi6 : sata_nv
[    4.376928] scsi7 : sata_nv
[    4.377100] ata7: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 23
[    4.377103] ata8: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 23
[    4.808015] usb 1-5: new low speed USB device using ohci_hcd and address 4
[    5.022229] usb 1-5: configuration #1 chosen from 1 choice
[    5.156035] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.164217] ata8.00: ATA-7: WDC WD2000KS-00MJB0, 02.01C03, max UDMA/133
[    5.164220] ata8.00: 390721968 sectors, multi 1: LBA48 
[    5.173212] ata8.00: configured for UDMA/133
[    5.173288] scsi 7:0:0:0: Direct-Access     ATA      WDC WD2000KS-00M 02.0 PQ: 0 ANSI: 5
[    5.173421] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[    5.173800] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[    5.173804] forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
[    5.173807] forcedeth 0000:00:08.0: setting latency timer to 64
[    5.173829] nv_probe: set workaround bit for reversed mac addr
[    5.328014] usb 1-9: new low speed USB device using ohci_hcd and address 5
[    5.539278] usb 1-9: configuration #1 chosen from 1 choice
[    5.622035] usb 1-2.3: new full speed USB device using ohci_hcd and address 6
[    5.692756] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1a:92:45:0c:8f
[    5.692759] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[    5.693171] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
[    5.693174] forcedeth 0000:00:09.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21
[    5.693178] forcedeth 0000:00:09.0: setting latency timer to 64
[    5.693196] nv_probe: set workaround bit for reversed mac addr
[    5.744285] usb 1-2.3: configuration #1 chosen from 1 choice
[    6.212439] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:1a:92:45:0f:e4
[    6.212442] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[    6.213322] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[    6.213331] ohci1394 0000:01:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[    6.263035] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fdeff000-fdeff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    6.265847] pata_jmicron 0000:06:00.1: enabling device (0000 -> 0001)
[    6.266237] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[    6.266246] pata_jmicron 0000:06:00.1: PCI INT B -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
[    6.266280] pata_jmicron 0000:06:00.1: setting latency timer to 64
[    6.266779] scsi8 : pata_jmicron
[    6.268068] scsi9 : pata_jmicron
[    6.269159] ata9: PATA max UDMA/100 cmd 0x9c00 ctl 0x9800 bmdma 0x8c00 irq 16
[    6.269162] ata10: PATA max UDMA/100 cmd 0x9400 ctl 0x9000 bmdma 0x8c08 irq 16
[    6.320868] usbcore: registered new interface driver hiddev
[    6.327268] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb1/1-5/1-5:1.0/input/input1
[    6.327545] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-5
[    6.333237] input: EL USB Keyboard  as /devices/pci0000:00/0000:00:02.0/usb1/1-9/1-9:1.0/input/input2
[    6.333439] input,hidraw1: USB HID v1.00 Keyboard [EL USB Keyboard ] on usb-0000:00:02.0-9
[    6.340294] input: EL USB Keyboard  as /devices/pci0000:00/0000:00:02.0/usb1/1-9/1-9:1.1/input/input3
[    6.341068] input,hidraw2: USB HID v1.00 Device [EL USB Keyboard ] on usb-0000:00:02.0-9
[    6.341088] usbcore: registered new interface driver usbhid
[    6.341091] usbhid: v2.6:USB HID core driver
[    6.591955] ahci 0000:06:00.0: version 3.0
[    6.592367] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[    6.592371] ahci 0000:06:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[    6.608033] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    6.608036] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    6.608041] ahci 0000:06:00.0: setting latency timer to 64
[    6.608196] scsi10 : ahci
[    6.608574] scsi11 : ahci
[    6.608607] ata11: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16
[    6.608610] ata12: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 16
[    6.928027] ata11: SATA link down (SStatus 0 SControl 300)
[    7.428022] ata12: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    7.429392] ata12.00: HPA unlocked: 156310463 -> 156312576, native 156312576
[    7.429396] ata12.00: ATA-6: WDC WD800JD-23JNC0, 06.01C06, max UDMA/133
[    7.429398] ata12.00: 156312576 sectors, multi 0: LBA 
[    7.430138] ata12.00: configured for UDMA/133
[    7.444096] scsi 11:0:0:0: Direct-Access     ATA      WDC WD800JD-23JN 06.0 PQ: 0 ANSI: 5
[    7.459647] scsi 0:0:1:0: Attached scsi generic sg0 type 5
[    7.459679] scsi 7:0:0:0: Attached scsi generic sg1 type 0
[    7.459709] scsi 11:0:0:0: Attached scsi generic sg2 type 0
[    7.484036] Driver 'sd' needs updating - please use bus_type methods
[    7.484142] sd 7:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[    7.484155] sd 7:0:0:0: [sda] Write Protect is off
[    7.484157] sd 7:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.484176] sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.484241] sd 7:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[    7.484250] sd 7:0:0:0: [sda] Write Protect is off
[    7.484252] sd 7:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.484268] sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.484271]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[    7.490736]  sda1
[    7.490806] sd 7:0:0:0: [sda] Attached SCSI disk
[    7.490853] sd 11:0:0:0: [sdb] 156312576 512-byte hardware sectors (80032 MB)
[    7.490863] sd 11:0:0:0: [sdb] Write Protect is off
[    7.490865] sd 11:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    7.490882] sd 11:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.490916] sd 11:0:0:0: [sdb] 156312576 512-byte hardware sectors (80032 MB)
[    7.490925] sd 11:0:0:0: [sdb] Write Protect is off
[    7.490927] sd 11:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    7.490943] sd 11:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.490946]  sdb: sdb1 sdb2 <sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[    7.502662] Uniform CD-ROM driver Revision: 3.20
[    7.502714] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    7.521171]  sdb5 >
[    7.521260] sd 11:0:0:0: [sdb] Attached SCSI disk
[    7.533101] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d800011e03a5]
[    7.716910] PM: Starting manual resume from disk
[    7.716914] PM: Resume from partition 8:21
[    7.716915] PM: Checking hibernation image.
[    7.717015] PM: Resume from disk failed.
[    7.752511] kjournald starting.  Commit interval 5 seconds
[    7.752528] EXT3-fs: mounted filesystem with ordered data mode.
[   14.058017] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.100056] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   14.100174] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
[   14.100176] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[   14.100178] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   14.301923] udevd version 124 started
[   14.505174] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[   14.505179] ACPI: I/O resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM01 [0x1c40-0x1c45]
[   14.505181] ACPI: Device needs an ACPI driver
[   14.505201] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[   14.641942] ck804xrom ck804xrom_init_one(): Unable to register resource 0x00000000ff000000-0x00000000ffffffff - kernel bug?
[   14.744202] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   14.782359] Found: PMC Pm49FL004
[   14.782369] ck804xrom @fff80000: Found 1 x8 devices at 0x0 in 8-bit bank
[   14.788023] ACPI: Power Button (FF) [PWRF]
[   14.788101] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[   14.820041] ACPI: Power Button (CM) [PWRB]
[   14.892645] number of JEDEC chips: 1
[   14.892648] cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
[   15.313938] parport_pc 00:09: reported by Plug and Play ACPI
[   15.313964] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   15.436144] usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7E04
[   15.436159] usbcore: registered new interface driver usblp
[   15.579606] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
[   15.889136] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   15.912577] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   16.026841] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   16.033029] usb 2-3: reset high speed USB device using ehci_hcd and address 3
[   16.127705] Linux agpgart interface v0.103
[   16.218990] ndiswrapper: driver net5523 (,02/23/2006,1.5.0.110) loaded
[   16.219610] ndiswrapper (ZwQueryValueKey:2330): not fully implemented (yet)
[   16.675976] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[   16.675982] nvidia 0000:07:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
[   16.675988] nvidia 0000:07:00.0: setting latency timer to 64
[   16.676231] NVRM: loading NVIDIA UNIX x86 Kernel Module  177.82  Tue Nov  4 13:35:57 PST 2008
[   17.068796] wlan0: ethernet device 00:01:e3:ca:be:9f using NDIS driver: net5523, version: 0x10005, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 129B:160C.F.conf
[   17.128438] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[   17.137072] usbcore: registered new interface driver ndiswrapper
[   17.244949] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[   17.244954] HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[   17.244971] HDA Intel 0000:00:06.1: setting latency timer to 64
[   17.950434] lp0: using parport0 (interrupt-driven).
[   18.065955] Adding 3229024k swap on /dev/sdb5.  Priority:-1 extents:1 across:3229024k
[   18.070020] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[   18.070257] EXT3 FS on sdb1, internal journal
[   19.356809] type=1505 audit(1237891722.514:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4623
[   19.417970] type=1505 audit(1237891722.577:3): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=4628
[   19.563105] type=1505 audit(1237891722.721:4): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4632
[   19.563286] type=1505 audit(1237891722.721:5): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4632
[   19.600646] type=1505 audit(1237891722.761:6): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=4636
[   20.940062] RPC: Registered udp transport module.
[   20.940065] RPC: Registered tcp transport module.
[   21.683481] ACPI: WMI: Mapper loaded
[   22.113180] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ processors (2 cpu cores) (version 2.20.00)
[   22.113230] powernow-k8:    0 : fid 0x14 (2800 MHz), vid 0xa
[   22.113233] powernow-k8:    1 : fid 0x12 (2600 MHz), vid 0xc
[   22.113235] powernow-k8:    2 : fid 0x10 (2400 MHz), vid 0xe
[   22.113237] powernow-k8:    3 : fid 0xe (2200 MHz), vid 0x10
[   22.113238] powernow-k8:    4 : fid 0xc (2000 MHz), vid 0x10
[   22.113240] powernow-k8:    5 : fid 0xa (1800 MHz), vid 0x10
[   22.113242] powernow-k8:    6 : fid 0x2 (1000 MHz), vid 0x12
[   22.968047] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   23.140684] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   23.140691] apm: disabled - APM is not SMP safe.
[   26.338280] ppdev: user-space parallel port driver
[   37.250432] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   37.376210] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   37.405755] NFSD: starting 90-second grace period
[   38.500025] Clocksource tsc unstable (delta = -195465744 ns)
[   38.753250] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   38.753263] vboxdrv: Successfully done.
[   38.753268] vboxdrv: Found 2 processor cores.
[   38.757148] vboxdrv: fAsync=1 offMin=0xa243a offMax=0xa243a
[   38.758102] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[   38.758111] vboxdrv: Successfully loaded version 2.0.4_OSE (interface 0x00090000).
[   41.257778] Bluetooth: Core ver 2.13
[   41.261380] NET: Registered protocol family 31
[   41.261391] Bluetooth: HCI device and connection manager initialized
[   41.261399] Bluetooth: HCI socket layer initialized
[   41.319569] Bluetooth: L2CAP ver 2.11
[   41.319581] Bluetooth: L2CAP socket layer initialized
[   41.372345] Bluetooth: SCO (Voice Link) ver 0.6
[   41.372360] Bluetooth: SCO socket layer initialized
[   41.394470] Bluetooth: RFCOMM socket layer initialized
[   41.394507] Bluetooth: RFCOMM TTY layer initialized
[   41.394512] Bluetooth: RFCOMM ver 1.10
[   41.445214] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   41.445225] Bluetooth: BNEP filters: protocol multicast
[   41.696563] Bridge firewalling registered
[   45.813107] eth1: no link during initialization.
[   46.383066] NET: Registered protocol family 17
[   49.112153] Connection attempt (UNPRIV): IN=eth0 OUT= MAC= SRC=192.168.2.100 DST=224.0.0.251 LEN=243 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=223 
[   49.136084] Connection attempt (UNPRIV): IN=eth0 OUT= MAC= SRC=192.168.2.100 DST=224.0.0.251 LEN=149 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=129 
[  152.472429] ppdev0: registered pardevice
[  152.520031] ppdev0: unregistered pardevice
[  152.941720] ppdev0: registered pardevice
[  152.981198] ppdev0: unregistered pardevice
[  155.392268] ppdev0: registered pardevice
[  155.444218] ppdev0: unregistered pardevice
[ 5941.631459] attempt to access beyond end of device
[ 5941.631473] sdb2: rw=0, want=68, limit=2
[ 5941.632031] attempt to access beyond end of device
[ 5941.632040] sdb2: rw=0, want=1028, limit=2
[ 5941.633072] attempt to access beyond end of device
[ 5941.633082] sdb2: rw=0, want=2052, limit=2
[ 5941.634539] UDF-fs: No partition found (1)
[ 5941.635358] attempt to access beyond end of device
[ 5941.635366] sdb2: rw=0, want=66, limit=2
[ 5941.636837] isofs_fill_super: bread failed, dev=sdb2, iso_blknum=16, block=32
[10978.085153] hub 1-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
[10978.085169] usb 1-2: USB disconnect, address 3
[10978.085179] usb 1-2.3: USB disconnect, address 6
[10978.086940] usblp0: removed
[10978.400326] usb 1-2: new full speed USB device using ohci_hcd and address 7
[10978.614965] usb 1-2: configuration #1 chosen from 1 choice
[10978.621044] hub 1-2:1.0: USB hub found
[10978.622098] hub 1-2:1.0: 4 ports detected
[10978.949092] usb 1-2.3: new full speed USB device using ohci_hcd and address 8
[10979.073324] usb 1-2.3: configuration #1 chosen from 1 choice
[10979.161280] usblp0: USB Bidirectional printer dev 8 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7E04
[14373.448848] usblp0: removed
[18130.346101] /usr/bin/serpen[8919]: segfault at 736e6157 ip b7d6379d sp bff7ad60 error 4 in libgobject-2.0.so.0.1800.2[b7d40000+3c000]
e la seconda...
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: Bing [Bot], criceto45, OMBRA_Linux, Velvettiere e 6 ospiti