periferiche usb scomparse(non vengono rilevate)

Riconoscimento, installazione e configurazione delle periferiche.
Scrivi risposta
Avatar utente
criceto45
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2972
Iscrizione: sabato 2 giugno 2007, 12:51

periferiche usb scomparse(non vengono rilevate)

Messaggio da criceto45 »

ragazzi e' sucesso una cosa stranissima imprvisamente qualsiasi cosa metta in unaa presa usb non viene vista mouse,penna,web,disco esterno ecc cosa e' sucesso posto alcuni dati

Codice: Seleziona tutto

criceto@criceto-laptop:~$ lsusb
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
criceto@criceto-laptop:~$ 

anche inserendo il cd live il mouse non funziona,ne ho provati diversi ma e' uguale grazie
Ultima modifica di criceto45 il giovedì 26 marzo 2009, 14:52, modificato 1 volta in totale.
Avatar utente
streetcross
Accecante Asceta
Accecante Asceta
Messaggi: 24943
Iscrizione: giovedì 7 febbraio 2008, 10:52
Contatti:

Re: periferiche usb scomparse

Messaggio da streetcross »

dai lsusb con qualcosa collegato, non vede nulla?
Ubuntu user #22995 Linux user #474679 Stacy can't you see, you're just not the girl for me, I know it might be wrong, but I'm in love with Stacy's Mom. ﺕ In molti credono di essere degli alternativi. In realtà la maggior parte di loro lascia la strada principale per seguire la seconda strada più battuta; in pochi si creano il proprio sentiero.
Avatar utente
criceto45
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2972
Iscrizione: sabato 2 giugno 2007, 12:51

Re: periferiche usb scomparse

Messaggio da criceto45 »

quando l'ho postato aveva il maue e una chiavetta da 1gb.inoltre durante il boot dice error usb device error 62 o qualcosa di simile
Avatar utente
streetcross
Accecante Asceta
Accecante Asceta
Messaggi: 24943
Iscrizione: giovedì 7 febbraio 2008, 10:52
Contatti:

Re: periferiche usb scomparse

Messaggio da streetcross »

uhm per favore riporta l'errore completo
Ubuntu user #22995 Linux user #474679 Stacy can't you see, you're just not the girl for me, I know it might be wrong, but I'm in love with Stacy's Mom. ﺕ In molti credono di essere degli alternativi. In realtà la maggior parte di loro lascia la strada principale per seguire la seconda strada più battuta; in pochi si creano il proprio sentiero.
Avatar utente
criceto45
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2972
Iscrizione: sabato 2 giugno 2007, 12:51

Re: periferiche usb scomparse

Messaggio da criceto45 »

ora riavvio poi  ti dico grazie
Avatar utente
criceto45
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2972
Iscrizione: sabato 2 giugno 2007, 12:51

Re: periferiche usb scomparse

Messaggio da criceto45 »

dunque ho riavviato 5 volte e l'ha dato una sola,impossibile leggerlo tutto e' troppo veloce durera 2 secondi.ma lo fa subito dopo il caricamento di ubuntu,penso mentre carichi il kernel.non ci sono dei modi diversi per rilevare le periferiche
Avatar utente
criceto45
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2972
Iscrizione: sabato 2 giugno 2007, 12:51

Re: periferiche usb scomparse

Messaggio da criceto45 »

ho provato a collegare e scollegare il mouse e ottengo questo

Codice: Seleziona tutto

criceto@criceto-laptop:~$ dmesg | tail -f /var/log/messages
Mar 25 23:32:50 criceto-laptop kernel: [   43.125398] lo: Disabled Privacy Extensions
Mar 25 23:33:17 criceto-laptop python: hp-systray(init)[5766]: warning: No hp: or hpfax: devices found in any installed CUPS queue. Exiting.
Mar 25 23:34:29 criceto-laptop kernel: [  142.053306] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
Mar 25 23:34:29 criceto-laptop kernel: [  142.055793] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
Mar 25 23:34:29 criceto-laptop kernel: [  142.057534] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
Mar 25 23:34:29 criceto-laptop kernel: [  142.059769] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
Mar 25 23:34:29 criceto-laptop kernel: [  142.070404] psmouse.c: TouchPad at isa0060/serio4/input0 - driver resynched.
Mar 25 23:34:42 criceto-laptop kernel: [  155.427222] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4
Mar 25 23:34:42 criceto-laptop kernel: [  155.439485] psmouse.c: TouchPad at isa0060/serio4/input0 - driver resynched.
Mar 25 23:52:32 criceto-laptop -- MARK --
Mar 26 00:01:43 criceto-laptop kernel: [ 1776.552061] usb 1-1: new low speed USB device using ohci_hcd and address 16
Mar 26 00:01:44 criceto-laptop kernel: [ 1777.296054] usb 1-1: new low speed USB device using ohci_hcd and address 17
Mar 26 00:01:45 criceto-laptop kernel: [ 1778.040057] usb 1-1: new low speed USB device using ohci_hcd and address 18
Mar 26 00:01:45 criceto-laptop kernel: [ 1778.624055] usb 1-1: new low speed USB device using ohci_hcd and address 19
Mar 26 00:02:53 criceto-laptop kernel: [ 1846.608061] usb 2-3: new low speed USB device using ohci_hcd and address 2
Mar 26 00:02:54 criceto-laptop kernel: [ 1847.352054] usb 2-3: new low speed USB device using ohci_hcd and address 3
Mar 26 00:02:55 criceto-laptop kernel: [ 1848.096056] usb 2-3: new low speed USB device using ohci_hcd and address 4
Mar 26 00:02:55 criceto-laptop kernel: [ 1848.680924] usb 2-3: new low speed USB device using ohci_hcd and address 5

avete suggerimenti grazie
Avatar utente
criceto45
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2972
Iscrizione: sabato 2 giugno 2007, 12:51

Re: periferiche usb scomparse

Messaggio da criceto45 »

vi posto anche una parte di dmesg,inoltre vi chiederei di indicarmi dei comandi per vedere se e' un problema del so o della macchina

Codice: Seleziona tutto

    0.020455] SMP alternatives: switching to UP code
[    0.026274] Freeing SMP alternatives: 11k freed
[    0.026279] ACPI: Core revision 20080609
[    0.029172] ACPI: Checking initramfs for custom DSDT
[    0.452253] ENABLING IO-APIC IRQs
[    0.456187] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.495871] CPU0: AMD Turion(tm) 64 Mobile Technology ML-32 stepping 02
[    0.496031] Brought up 1 CPUs
[    0.496031] Total of 1 processors activated (3589.50 BogoMIPS).
[    0.496031] CPU0 attaching NULL sched-domain.
[    0.496031] net_namespace: 840 bytes
[    0.496031] Booting paravirtualized kernel on bare hardware
[    0.496031] Time: 11:38:36  Date: 03/26/09
[    0.496031] NET: Registered protocol family 16
[    0.496031] EISA bus registered
[    0.496031] ACPI: bus type pci registered
[    0.496031] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 7
[    0.496031] PCI: MCFG area at e0000000 reserved in E820
[    0.496031] PCI: Using MMCONFIG for extended config space
[    0.496031] PCI: Using configuration type 1 for base access
[    0.496031] ACPI: EC: Look up EC in DSDT
[    0.497432] ACPI: Interpreter enabled
[    0.497437] ACPI: (supports S0 S3 S4 S5)
[    0.497453] ACPI: Using IOAPIC for interrupt routing
[    0.501167] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.580676] ACPI: EC: GPE = 0x1a, I/O: command/status = 0x66, data = 0x62
[    0.580679] ACPI: EC: driver started in interrupt mode
[    0.580725] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.580867] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.580871] pci 0000:00:04.0: PME# disabled
[    0.580933] PCI: 0000:00:13.0 reg 10 32bit mmio: [b0000000, b0000fff]
[    0.581041] PCI: 0000:00:13.1 reg 10 32bit mmio: [b0001000, b0001fff]
[    0.581160] PCI: 0000:00:13.2 reg 10 32bit mmio: [b0002000, b0002fff]
[    0.581242] pci 0000:00:13.2: supports D1
[    0.581244] pci 0000:00:13.2: supports D2
[    0.581247] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.581252] pci 0000:00:13.2: PME# disabled
[    0.581297] PCI: 0000:00:14.0 reg 10 io port: [8400, 840f]
[    0.581306] PCI: 0000:00:14.0 reg 14 32bit mmio: [b0003000, b00033ff]
[    0.581351] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.581409] PCI: 0000:00:14.1 reg 10 io port: [8430, 8437]
[    0.581418] PCI: 0000:00:14.1 reg 14 io port: [8424, 8427]
[    0.581427] PCI: 0000:00:14.1 reg 18 io port: [8428, 842f]
[    0.581436] PCI: 0000:00:14.1 reg 1c io port: [8420, 8423]
[    0.581445] PCI: 0000:00:14.1 reg 20 io port: [8410, 841f]
[    0.581639] PCI: 0000:00:14.5 reg 10 32bit mmio: [b0003400, b00034ff]
[    0.581746] PCI: 0000:00:14.6 reg 10 32bit mmio: [b0003800, b00038ff]
[    0.581909] PCI: 0000:01:05.0 reg 10 32bit mmio: [c0000000, cfffffff]
[    0.581914] PCI: 0000:01:05.0 reg 14 io port: [9000, 90ff]
[    0.581918] PCI: 0000:01:05.0 reg 18 32bit mmio: [b0100000, b010ffff]
[    0.581928] PCI: 0000:01:05.0 reg 30 32bit mmio: [0, 1ffff]
[    0.581939] pci 0000:01:05.0: supports D1
[    0.581941] pci 0000:01:05.0: supports D2
[    0.581956] PCI: bridge 0000:00:01.0 io port: [9000, 9fff]
[    0.581960] PCI: bridge 0000:00:01.0 32bit mmio: [b0100000, b01fffff]
[    0.581964] PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, cfffffff]
[    0.582022] PCI: bridge 0000:00:04.0 io port: [0, fff]
[    0.582025] PCI: bridge 0000:00:04.0 32bit mmio: [0, fffff]
[    0.582065] PCI: 0000:06:02.0 reg 10 32bit mmio: [b0204000, b0205fff]
[    0.582174] PCI: 0000:06:04.0 reg 10 32bit mmio: [b0208000, b0208fff]
[    0.582215] pci 0000:06:04.0: supports D1
[    0.582217] pci 0000:06:04.0: supports D2
[    0.582220] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.582226] pci 0000:06:04.0: PME# disabled
[    0.582276] PCI: 0000:06:04.2 reg 10 32bit mmio: [b0209000, b02097ff]
[    0.582288] PCI: 0000:06:04.2 reg 14 32bit mmio: [b0200000, b0203fff]
[    0.582372] pci 0000:06:04.2: supports D1
[    0.582374] pci 0000:06:04.2: supports D2
[    0.582376] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot
[    0.582383] pci 0000:06:04.2: PME# disabled
[    0.582429] PCI: 0000:06:04.3 reg 10 32bit mmio: [b0206000, b0207fff]
[    0.582517] pci 0000:06:04.3: supports D1
[    0.582519] pci 0000:06:04.3: supports D2
[    0.582521] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot
[    0.582527] pci 0000:06:04.3: PME# disabled
[    0.582574] PCI: 0000:06:04.4 reg 10 32bit mmio: [b020a000, b020a0ff]
[    0.582585] PCI: 0000:06:04.4 reg 14 32bit mmio: [b0209c00, b0209cff]
[    0.582596] PCI: 0000:06:04.4 reg 18 32bit mmio: [b0209800, b02098ff]
[    0.582668] pci 0000:06:04.4: supports D1
[    0.582669] pci 0000:06:04.4: supports D2
[    0.582672] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot
[    0.582678] pci 0000:06:04.4: PME# disabled
[    0.582732] PCI: 0000:06:06.0 reg 10 io port: [a000, a0ff]
[    0.582743] PCI: 0000:06:06.0 reg 14 32bit mmio: [b020a400, b020a4ff]
[    0.582822] pci 0000:06:06.0: supports D1
[    0.582824] pci 0000:06:06.0: supports D2
[    0.582826] pci 0000:06:06.0: PME# supported from D1 D2 D3hot D3cold
[    0.582832] pci 0000:06:06.0: PME# disabled
[    0.582885] pci 0000:00:14.4: transparent bridge
[    0.582893] PCI: bridge 0000:00:14.4 io port: [a000, afff]
[    0.582899] PCI: bridge 0000:00:14.4 32bit mmio: [b0200000, b02fffff]
[    0.582942] bus 00 -> node 0
[    0.582948] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.583115] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[    0.583264] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.583424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.585942] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[    0.586073] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[    0.586203] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[    0.586331] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[    0.586460] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[    0.586588] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[    0.586717] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[    0.586845] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[    0.587011] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.587048] pnp: PnP ACPI init
[    0.587056] ACPI: bus type pnp registered
[    0.589292] pnp 00:08: io resource (0x72-0x73) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[    0.589297] pnp 00:08: io resource (0xb0-0xb1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[    0.589301] pnp 00:08: io resource (0x92-0x92) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[    0.589305] pnp 00:08: io resource (0x40b-0x40b) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[    0.589309] pnp 00:08: io resource (0x4d0-0x4d1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[    0.589313] pnp 00:08: io resource (0x4d6-0x4d6) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[    0.589316] pnp 00:08: io resource (0x870-0x87f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[    0.589320] pnp 00:08: io resource (0xc00-0xc01) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[    0.589324] pnp 00:08: io resource (0xc14-0xc14) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[    0.589328] pnp 00:08: io resource (0xc50-0xc52) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[    0.589332] pnp 00:08: io resource (0xc6c-0xc6c) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[    0.589336] pnp 00:08: io resource (0xc6f-0xc6f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[    0.589340] pnp 00:08: io resource (0xcd4-0xcd5) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[    0.589344] pnp 00:08: io resource (0xcd6-0xcd7) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[    0.589348] pnp 00:08: io resource (0xcd8-0xcdf) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[    0.589352] pnp 00:08: io resource (0xf40-0xf47) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[    0.589356] pnp 00:08: io resource (0x280-0x293) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[    0.589551] pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
[    0.589555] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
[    0.589569] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
[    0.612109] pnp: PnP ACPI: found 10 devices
[    0.612111] ACPI: ACPI bus type pnp unregistered
[    0.612115] PnPBIOS: Disabled by ACPI PNP
[    0.612457] PCI: Using ACPI for IRQ routing
[    0.612464] pci 0000:00:04.0: BAR 7: can't allocate resource
[    0.612467] pci 0000:00:04.0: BAR 8: can't allocate resource
[    0.612614] NET: Registered protocol family 8
[    0.612614] NET: Registered protocol family 20
[    0.612614] NetLabel: Initializing
[    0.612614] NetLabel:  domain hash size = 128
[    0.612614] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.612614] NetLabel:  unlabeled traffic allowed by default
[    0.612614] tracer: 772 pages allocated for 65536 entries of 48 bytes
[    0.612614]    actual entries 65620
[    0.612614] AppArmor: AppArmor Filesystem Enabled
[    0.612632] ACPI: RTC can wake from S4
[    0.612639] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[    0.612639] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.612639] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[    0.612639] system 00:08: ioport range 0x1080-0x1080 has been reserved
[    0.612639] system 00:08: ioport range 0x8000-0x805f has been reserved
[    0.612639] system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
[    0.648346] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.648350] pci 0000:00:01.0:   IO window: 0x9000-0x9fff
[    0.648354] pci 0000:00:01.0:   MEM window: 0xb0100000-0xb01fffff
[    0.648358] pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
[    0.648363] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[    0.648365] pci 0000:00:04.0:   IO window: disabled
[    0.648369] pci 0000:00:04.0:   MEM window: disabled
[    0.648372] pci 0000:00:04.0:   PREFETCH window: disabled
[    0.648379] pci 0000:06:04.0: CardBus bridge, secondary bus 0000:07
[    0.648382] pci 0000:06:04.0:   IO window: 0x00a400-0x00a4ff
[    0.648388] pci 0000:06:04.0:   IO window: 0x00a800-0x00a8ff
[    0.648395] pci 0000:06:04.0:   PREFETCH window: 0x60000000-0x63ffffff
[    0.648401] pci 0000:06:04.0:   MEM window: 0x64000000-0x67ffffff
[    0.648408] pci 0000:00:14.4: PCI bridge, secondary bus 0000:06
[    0.648412] pci 0000:00:14.4:   IO window: 0xa000-0xafff
[    0.648419] pci 0000:00:14.4:   MEM window: 0xb0200000-0xb02fffff
[    0.648425] pci 0000:00:14.4:   PREFETCH window: 0x00000060000000-0x00000063ffffff
[    0.648446] pci 0000:00:04.0: setting latency timer to 64
[    0.648468] pci 0000:06:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.648476] bus: 00 index 0 io port: [0, ffff]
[    0.648478] bus: 00 index 1 mmio: [0, ffffffff]
[    0.648481] bus: 01 index 0 io port: [9000, 9fff]
[    0.648483] bus: 01 index 1 mmio: [b0100000, b01fffff]
[    0.648486] bus: 01 index 2 mmio: [c0000000, cfffffff]
[    0.648488] bus: 01 index 3 mmio: [0, 0]
[    0.648491] bus: 02 index 0 mmio: [0, fff]
[    0.648493] bus: 02 index 1 mmio: [0, fffff]
[    0.648495] bus: 02 index 2 mmio: [0, 0]
[    0.648497] bus: 02 index 3 mmio: [0, 0]
[    0.648499] bus: 06 index 0 io port: [a000, afff]
[    0.648502] bus: 06 index 1 mmio: [b0200000, b02fffff]
[    0.648504] bus: 06 index 2 mmio: [60000000, 63ffffff]
[    0.648507] bus: 06 index 3 io port: [0, ffff]
[    0.648509] bus: 06 index 4 mmio: [0, ffffffff]
[    0.648511] bus: 07 index 0 io port: [a400, a4ff]
[    0.648514] bus: 07 index 1 io port: [a800, a8ff]
[    0.648516] bus: 07 index 2 mmio: [60000000, 63ffffff]
[    0.648519] bus: 07 index 3 mmio: [64000000, 67ffffff]
[    0.648532] NET: Registered protocol family 2
[    0.648660] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.649023] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.650143] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.650766] TCP: Hash tables configured (established 131072 bind 65536)
[    0.650769] TCP reno registered
[    0.650896] NET: Registered protocol family 1
[    0.651038] checking if image is initramfs... it is
[    1.152079] Switched to high resolution mode on CPU 0
[    1.527683] Freeing initrd memory: 9641k freed
[    1.528454] audit: initializing netlink socket (disabled)
[    1.528474] type=2000 audit(1238067516.528:1): initialized
[    1.535101] highmem bounce pool size: 64 pages
[    1.535108] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.537310] VFS: Disk quotas dquot_6.5.1
[    1.537402] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.537514] msgmni has been set to 1757
[    1.537645] io scheduler noop registered
[    1.537648] io scheduler anticipatory registered
[    1.537650] io scheduler deadline registered
[    1.537663] io scheduler cfq registered (default)
[    1.537675] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    1.537730] pci 0000:01:05.0: Boot video device
[    1.537848] pcieport-driver 0000:00:04.0: setting latency timer to 64
[    1.537873] pcieport-driver 0000:00:04.0: found MSI capability
[    1.537877] pci_express 0000:00:04.0:pcie00: allocate port service
[    1.537921] pci_express 0000:00:04.0:pcie01: allocate port service
[    1.560089] aer 0000:00:04.0:pcie01: AER service couldn't init device: no _OSC support
[    1.560276] isapnp: Scanning for PnP cards...
[    1.914432] isapnp: No Plug & Play device found
[    1.950617] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.951234] serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.951243] serial 0000:00:14.6: PCI INT B disabled
[    1.952812] brd: module loaded
[    1.952890] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    1.953005] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.974179] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.991961] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.991967] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.991969] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.991972] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.991975] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.992469] mice: PS/2 mouse device common for all mice
[    1.993329] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.993356] rtc0: alarms up to one month
[    1.993475] EISA: Probing bus 0 at eisa.0
[    1.993484] Cannot allocate resource for EISA slot 1
[    1.993512] Cannot allocate resource for EISA slot 8
[    1.993514] EISA: Detected 0 cards.
[    1.993518] cpuidle: using governor ladder
[    1.993521] cpuidle: using governor menu
[    1.994105] TCP cubic registered
[    1.994145] Using IPI No-Shortcut mode
[    1.994333] registered taskstats version 1
[    1.994464]   Magic number: 1:681:631
[    1.994564] tty ptyca: hash matches
[    1.994700] rtc_cmos 00:04: setting system clock to 2009-03-26 11:38:38 UTC (1238067518)
[    1.994703] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.994705] EDD information not available.
[    1.995040] Freeing unused kernel memory: 424k freed
[    1.995106] Write protecting the kernel text: 2580k
[    1.995146] Write protecting the kernel read-only data: 940k
[    2.011101] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    2.073086] compcache: Compressed swap size set to: 318956 KB
[    2.073832] TLSF: pool: f8824000, init_size=16384, max_size=0, grow_size=16384
[    2.260046] fuse init (API version 7.9)
[    2.370455] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    2.370509] processor ACPI0007:00: registered as cooling_device0
[    2.370514] ACPI: Processor [CPU0] (supports 8 throttling states)
[    2.374491] Marking TSC unstable due to TSC halts in idle
[    2.391950] thermal LNXTHERM:01: registered as thermal_zone0
[    2.407771] ACPI: Thermal Zone [THRM] (0 C)
[    2.973925] usbcore: registered new interface driver usbfs
[    2.973953] usbcore: registered new interface driver hub
[    2.973985] usbcore: registered new device driver usb
[    2.983310] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.983345] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.983360] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    2.983414] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[    2.983443] ohci_hcd 0000:00:13.0: irq 19, io mem 0xb0000000
[    3.023319] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    3.040216] usb usb1: configuration #1 chosen from 1 choice
[    3.040248] hub 1-0:1.0: USB hub found
[    3.040263] hub 1-0:1.0: 4 ports detected
[    3.063376] No dock devices found.
[    3.120470] SCSI subsystem initialized
[    3.144321] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    3.144340] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    3.144367] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[    3.144388] ohci_hcd 0000:00:13.1: irq 19, io mem 0xb0001000
[    3.204612] usb usb2: configuration #1 chosen from 1 choice
[    3.204643] hub 2-0:1.0: USB hub found
[    3.204658] hub 2-0:1.0: 4 ports detected
[    3.223685] libata version 3.00 loaded.
[    3.250779] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    3.308388] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    3.308406] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    3.308432] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[    3.308490] ehci_hcd 0000:00:13.2: irq 19, io mem 0xb0002000
[    3.320045] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.320239] usb usb3: configuration #1 chosen from 1 choice
[    3.320269] hub 3-0:1.0: USB hub found
[    3.320281] hub 3-0:1.0: 8 ports detected
[    3.399004] Adding 318952k swap on /dev/ramzswap0.  Priority:100 extents:1 across:318952k
[    3.424370] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.424418] pata_atiixp 0000:00:14.1: setting latency timer to 64
[    3.424510] scsi0 : pata_atiixp
[    3.424603] scsi1 : pata_atiixp
[    3.426077] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14
[    3.426080] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15
[    3.588621] ata1.00: ATA-6: FUJITSU MHV2080AH, 00830096, max UDMA/100
[    3.588626] ata1.00: 156301488 sectors, multi 16: LBA 
[    3.604571] ata1.00: configured for UDMA/100
[    3.785239] ata2.00: ATAPI: PIONEER DVDRW   DVR-K15, 1.12, max MWDMA2
[    3.817215] ata2.00: configured for MWDMA2
[    3.817336] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2080A 0083 PQ: 0 ANSI: 5
[    3.826617] scsi 1:0:0:0: CD-ROM            PIONEER  DVDRW   DVR-K15  1.12 PQ: 0 ANSI: 5
[    3.827497] b43-pci-bridge 0000:06:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    3.884123] ssb: Sonics Silicon Backplane found on PCI device 0000:06:02.0
[    3.884175] ohci1394 0000:06:04.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[    3.933945] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23]  MMIO=[b0209000-b02097ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    3.940046] 8139cp 0000:06:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[    3.940053] 8139cp 0000:06:06.0: Try the "8139too" driver instead.
[    3.952605] 8139too Fast Ethernet driver 0.9.28
[    3.952661] 8139too 0000:06:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    3.953916] eth0: RealTek RTL8139 at 0xa000, 00:0f:b0:c0:e3:74, IRQ 22
[    3.953919] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[    3.970198] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    3.970241] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[    3.993517] Driver 'sd' needs updating - please use bus_type methods
[    3.993630] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[    3.993647] sd 0:0:0:0: [sda] Write Protect is off
[    3.993650] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.993674] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.993745] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[    3.993759] sd 0:0:0:0: [sda] Write Protect is off
[    3.993762] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.993784] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.993789]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[    4.068504]  sda1 sda2 < sda5 >
[    4.091921] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.120406] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    4.120413] Uniform CD-ROM driver Revision: 3.20
[    4.120527] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.419986] kjournald starting.  Commit interval 5 seconds
[    4.420020] EXT3-fs: mounted filesystem with ordered data mode.
[    5.204155] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[613f0200400b407a]
[   12.146660] udevd version 124 started
[   12.940174] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   12.976236] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.028170] Linux agpgart interface v0.103
[   13.223252] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8400, revision 0
[   13.860249] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   13.872302] ACPI: Power Button (FF) [PWRF]
[   13.872447] input: Sleep Button (FF) as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
[   13.884043] ACPI: Sleep Button (FF) [SLPF]
[   13.884185] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[   13.884273] ACPI: Lid Switch [LID]
[   13.884368] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[   13.892067] ACPI: Power Button (CM) [PWRB]
[   13.892183] ACPI: WMI: Mapper loaded
[   14.100182] ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   14.212055] MC'97 0 converters and GPIO not ready (0x1)
[   14.292203] Yenta: CardBus bridge found at 0000:06:04.0 [103c:309b]
[   14.292230] Yenta: Enabling burst memory read transactions
[   14.292236] Yenta: Using INTVAL to route CSC interrupts to PCI
[   14.292239] Yenta: Routing CardBus interrupts to ISA
[   14.292246] Yenta TI: socket 0000:06:04.0, mfunc 0x00a61b22, devctl 0x64
[   14.520182] sdhci: Secure Digital Host Controller Interface driver
[   14.520187] sdhci: Copyright(c) Pierre Ossman
[   14.524804] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20
[   14.524810] Socket status: 30000006
[   14.524814] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[   14.524817] cs: IO port probe 0xa000-0xafff: clean.
[   14.524987] pcmcia: parent PCI bridge Memory window: 0xb0200000 - 0xb02fffff
[   14.524990] pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff
[   14.620463] tifm_7xx1 0000:06:04.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[   14.620550] sdhci-pci 0000:06:04.4: SDHCI controller found [104c:8034] (rev 0)
[   14.620566] sdhci-pci 0000:06:04.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[   14.620623] mmc0: SDHCI controller on PCI [0000:06:04.4] using PIO
[   14.620659] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO
[   14.620694] mmc2: SDHCI controller on PCI [0000:06:04.4] using PIO
[   14.728081] ACPI: AC Adapter [ACAD] (on-line)
[   14.948208] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   15.172081] ACPI: Battery Slot [BAT1] (battery absent)
[   15.448261] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0f/device:10/input/input6
[   15.460022] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   15.992696] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   16.121886] b43-phy0: Broadcom 4318 WLAN found
[   16.190349] phy0: Selected rate control algorithm 'pid'
[   16.408446] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[   16.515187] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[   16.578726] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[   18.258539] cs: IO port probe 0x100-0x3af: clean.
[   18.261011] cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x4d0-0x4d7
[   18.262025] cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f
[   18.262872] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
[   18.263822] cs: IO port probe 0xa00-0xaff: clean.
[   19.116262] lp: driver loaded but no devices found
[   19.470206] Adding 3229024k swap on /dev/sda5.  Priority:-1 extents:1 across:3229024k
[   20.029639] EXT3 FS on sda1, internal journal
[   21.184357] type=1505 audit(1238067537.276:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4028
[   21.246208] type=1505 audit(1238067537.336:3): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=4033
[   21.479311] type=1505 audit(1238067537.568:4): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4037
[   21.479639] type=1505 audit(1238067537.568:5): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4037
[   21.660033] ip_tables: (C) 2000-2006 Netfilter Core Team
[   22.724551] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-32 processors (1 cpu cores) (version 2.20.00)
[   22.724594] powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x4
[   22.724597] powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0x6
[   22.724599] powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x16
[   22.724634] powernow-k8: ph2 null fid transition 0xa
[   23.493892] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   23.584316] apm: BIOS not found.
[   24.642805] ppdev: user-space parallel port driver
[   26.919431] Bluetooth: Core ver 2.13
[   26.921201] NET: Registered protocol family 31
[   26.921206] Bluetooth: HCI device and connection manager initialized
[   26.921210] Bluetooth: HCI socket layer initialized
[   26.938551] Bluetooth: L2CAP ver 2.11
[   26.938557] Bluetooth: L2CAP socket layer initialized
[   26.951396] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   26.951402] Bluetooth: BNEP filters: protocol multicast
[   26.968134] Bridge firewalling registered
[   26.983475] Bluetooth: SCO (Voice Link) ver 0.6
[   26.983481] Bluetooth: SCO socket layer initialized
[   27.102062] Bluetooth: RFCOMM socket layer initialized
[   27.102338] Bluetooth: RFCOMM TTY layer initialized
[   27.102343] Bluetooth: RFCOMM ver 1.10
[   28.648034] Clocksource tsc unstable (delta = -263158975 ns)
[   29.196936] pci 0000:01:05.0: power state changed by ACPI to D0
[   29.196961] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   29.636977] [drm] Initialized drm 1.1.0 20060810
[   29.658063] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[   29.906560] mtrr: base(0xc0000000) is not aligned on a size(0x9000000) boundary
[   30.204480] [drm] Setting GART location based on new memory map
[   30.207152] [drm] Loading R300 Microcode
[   30.207190] [drm] Num pipes: 1
[   30.207200] [drm] writeback test succeeded in 1 usecs
[   31.224884] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   31.318412] input: b43-phy0 as /devices/virtual/input/input9
[   31.412120] firmware: requesting b43/ucode5.fw
[   31.535354] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[   31.535368] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[   31.571334] input: b43-phy0 as /devices/virtual/input/input10
[   31.628064] firmware: requesting b43/ucode5.fw
[   31.633202] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[   31.633218] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[   31.889785] NET: Registered protocol family 17
[   38.676168] NET: Registered protocol family 10
[   38.679834] lo: Disabled Privacy Extensions
[   49.288030] eth0: no IPv6 routers present
criceto@criceto-laptop:~$ 

Avatar utente
criceto45
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2972
Iscrizione: sabato 2 giugno 2007, 12:51

Re: periferiche usb scomparse(non vengono rilevate)

Messaggio da criceto45 »

Codice: Seleziona tutto

criceto@criceto-laptop:~$ sudo ispci
[sudo] password for criceto: 
sudo: ispci: command not found
criceto@criceto-laptop:~$ sudo lspci
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
00:14.6 Modem: ATI Technologies Inc SB400 AC'97 Modem Controller (rev 02)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE)
06:02.0 Network controller: Broadcom Corporation BCM4311 [AirForce 54g] 802.11a/b/g PCI Express Transceiver (rev 02)
06:04.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:04.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:04.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:04.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
06:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
criceto@criceto-laptop:~$ 

altro dato spero sia utile
Avatar utente
criceto45
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2972
Iscrizione: sabato 2 giugno 2007, 12:51

Re: periferiche usb scomparse(non vengono rilevate)

Messaggio da criceto45 »

nessuno ha qualche idea ??? ???
Avatar utente
streetcross
Accecante Asceta
Accecante Asceta
Messaggi: 24943
Iscrizione: giovedì 7 febbraio 2008, 10:52
Contatti:

Re: periferiche usb scomparse(non vengono rilevate)

Messaggio da streetcross »

mi spiace ma non ne ho idea, prova il live di ubuntu, se anche col live hai problemi allora mi sa che è un problema delle usb
Ubuntu user #22995 Linux user #474679 Stacy can't you see, you're just not the girl for me, I know it might be wrong, but I'm in love with Stacy's Mom. ﺕ In molti credono di essere degli alternativi. In realtà la maggior parte di loro lascia la strada principale per seguire la seconda strada più battuta; in pochi si creano il proprio sentiero.
Avatar utente
runblade
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 396
Iscrizione: martedì 3 aprile 2007, 14:28
Distribuzione: 16 Valvole monoalbero in testa.
Località: Soave

Re: periferiche usb scomparse(non vengono rilevate)

Messaggio da runblade »

Il pc ha anche win? Se si, funziona con questo?
-Pensare che i videogames possano aver condizionato le menti delle persone è come se chi avesse giocato a pac-man ora ce lo ritovassimo in un ambiente buio, al suono di musica tecno, che gira attorno la pista e continuamente si impasticca...
-Non discutere mai con un idiota: ti trascina al suo livello e poi ti batte con l'esperienza
Avatar utente
criceto45
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2972
Iscrizione: sabato 2 giugno 2007, 12:51

Re: periferiche usb scomparse(non vengono rilevate)

Messaggio da criceto45 »

non ha win,infatti pensavo di reinstallarlo per vedere se le recupero
mi spiace ma non ne ho idea, prova il live di ubuntu, se anche col live hai problemi allora mi sa che è un problema delle usb
ho provato i live di ubuntu,mandriva e suse e il mouse non si muove.penso siano propio morte.provero con win se risolvo ma ho dei dubbi
Avatar utente
streetcross
Accecante Asceta
Accecante Asceta
Messaggi: 24943
Iscrizione: giovedì 7 febbraio 2008, 10:52
Contatti:

Re: periferiche usb scomparse(non vengono rilevate)

Messaggio da streetcross »

uhm dubito anche perchè windows è molto meno regolabile in queste situazioni, personalmente ho un portatile che con win dava le usb come morte mentre con GNU/Linux funziona alla grande :)
Ubuntu user #22995 Linux user #474679 Stacy can't you see, you're just not the girl for me, I know it might be wrong, but I'm in love with Stacy's Mom. ﺕ In molti credono di essere degli alternativi. In realtà la maggior parte di loro lascia la strada principale per seguire la seconda strada più battuta; in pochi si creano il proprio sentiero.
Avatar utente
criceto45
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2972
Iscrizione: sabato 2 giugno 2007, 12:51

Re: periferiche usb scomparse(non vengono rilevate)

Messaggio da criceto45 »

l'unico rimedio dunque sarebbe di portarlo da un tecnico.non sarebbe possibile rilevare se sia rotto qualche componente?
Avatar utente
streetcross
Accecante Asceta
Accecante Asceta
Messaggi: 24943
Iscrizione: giovedì 7 febbraio 2008, 10:52
Contatti:

Re: periferiche usb scomparse(non vengono rilevate)

Messaggio da streetcross »

criceto45 ha scritto: l'unico rimedio dunque sarebbe di portarlo da un tecnico.non sarebbe possibile rilevare se sia rotto qualche componente?
probabilmente è saltata la scheda usb, devi provare o a metterla su un altro pc per vedere se è quella o magari prova ad installarne una nuova
Ubuntu user #22995 Linux user #474679 Stacy can't you see, you're just not the girl for me, I know it might be wrong, but I'm in love with Stacy's Mom. ﺕ In molti credono di essere degli alternativi. In realtà la maggior parte di loro lascia la strada principale per seguire la seconda strada più battuta; in pochi si creano il proprio sentiero.
Avatar utente
criceto45
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2972
Iscrizione: sabato 2 giugno 2007, 12:51

Re: periferiche usb scomparse(non vengono rilevate)

Messaggio da criceto45 »

trattandosi di un notebook hp pavilion dv 8000,e nei suoi componenti non riesco a rilevarla,mi sapresti dire un comando per identificarla.poi ne vale la pena essendo un pc di riserva.di solito riparare notebook costa una follia
Avatar utente
streetcross
Accecante Asceta
Accecante Asceta
Messaggi: 24943
Iscrizione: giovedì 7 febbraio 2008, 10:52
Contatti:

Re: periferiche usb scomparse(non vengono rilevate)

Messaggio da streetcross »

Codice: Seleziona tutto

lshw
ti da il modello della scheda tra l'altro...
Ubuntu user #22995 Linux user #474679 Stacy can't you see, you're just not the girl for me, I know it might be wrong, but I'm in love with Stacy's Mom. ﺕ In molti credono di essere degli alternativi. In realtà la maggior parte di loro lascia la strada principale per seguire la seconda strada più battuta; in pochi si creano il proprio sentiero.
Avatar utente
criceto45
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2972
Iscrizione: sabato 2 giugno 2007, 12:51

Re: periferiche usb scomparse(non vengono rilevate)

Messaggio da criceto45 »

visto ti ringrazio.vedro' se conviene fargli manutenzione

Codice: Seleziona tutto

criceto@criceto-laptop:~$ sudo lshw
[sudo] password for criceto: 
criceto-laptop            
    description: Notebook
    product: Pavilion dv8000 (ET001EA#ABZ)
    vendor: Hewlett-Packard
    version: F.31
    serial: CND6072106
    width: 32 bits
    capabilities: smbios-2.31 dmi-2.31 smp-1.4 smp
    configuration: administrator_password=enabled boot=oem-specific chassis=notebook cpus=1 frontpanel_password=unknown keyboard_password=unknown power-on_password=disabled uuid=51FE26C2-7C65-11DA-A50E-000FB0C0E374
  *-core
       description: Motherboard
       product: 309B
       vendor: Hewlett-Packard
       physical id: 0
       version: 49.37
       serial: CND6072106
     *-firmware
          description: BIOS
          vendor: Hewlett-Packard
          physical id: 0
          version: F.31 (01/04/2006)
          size: 104KiB
          capacity: 448KiB
          capabilities: pci pcmcia pnp upgrade shadowing cdboot bootselect int5printscreen int9keyboard int17printer int10video acpi usb agp ls120boot smartbattery
     *-cpu
          description: CPU
          product: AMD Turion(tm) 64 Mobile Technology ML-32
          vendor: Advanced Micro Devices [AMD]
          physical id: 4
          bus info: cpu@0
          version: 15.4.2
          slot: U23
          size: 1800MHz
          capacity: 1800MHz
          width: 64 bits
          capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt x86-64 3dnowext 3dnow up pni lahf_lm cpufreq
        *-cache:0
             description: L2 cache
             physical id: 5
             slot: L2 Cache
             size: 512KiB
             capacity: 1MiB
             capabilities: synchronous internal write-back
        *-cache:1
             description: L1 cache
             physical id: 0
             size: 128KiB
        *-cache:2
             description: L2 cache
             physical id: 1
             size: 512KiB
     *-memory
          description: System Memory
          physical id: c
          slot: System board or motherboard
          size: 1280MiB
        *-bank:0
             description: DIMM DRAM Synchronous
             physical id: 0
             slot: JP11
             size: 256MiB
             width: 64 bits
        *-bank:1
             description: DIMM DRAM Synchronous
             physical id: 1
             slot: JP30
             size: 1GiB
             width: 64 bits
     *-pci:0
          description: Host bridge
          product: RS480 Host Bridge
          vendor: ATI Technologies Inc
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 01
          width: 32 bits
          clock: 66MHz
          configuration: latency=64
        *-pci:0
             description: PCI bridge
             product: RS480 PCI Bridge
             vendor: ATI Technologies Inc
             physical id: 1
             bus info: pci@0000:00:01.0
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: pci ht bus_master cap_list
           *-display UNCLAIMED
                description: VGA compatible controller
                product: Radeon XPRESS 200M 5955 (PCIE)
                vendor: ATI Technologies Inc
                physical id: 5
                bus info: pci@0000:01:05.0
                version: 00
                width: 32 bits
                clock: 66MHz
                capabilities: pm bus_master cap_list
                configuration: latency=66 mingnt=8
        *-pci:1
             description: PCI bridge
             product: RS480 PCI Bridge
             vendor: ATI Technologies Inc
             physical id: 4
             bus info: pci@0000:00:04.0
             version: 00
             width: 32 bits
             clock: 33MHz
             capabilities: pci pm pciexpress msi ht bus_master cap_list
             configuration: driver=pcieport-driver
        *-usb:0
             description: USB Controller
             product: IXP SB400 USB Host Controller
             vendor: ATI Technologies Inc
             physical id: 13
             bus info: pci@0000:00:13.0
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: msi bus_master cap_list
             configuration: driver=ohci_hcd latency=64 module=ohci_hcd
        *-usb:1
             description: USB Controller
             product: IXP SB400 USB Host Controller
             vendor: ATI Technologies Inc
             physical id: 13.1
             bus info: pci@0000:00:13.1
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: msi bus_master cap_list
             configuration: driver=ohci_hcd latency=64 module=ohci_hcd
        *-usb:2
             description: USB Controller
             product: IXP SB400 USB2 Host Controller
             vendor: ATI Technologies Inc
             physical id: 13.2
             bus info: pci@0000:00:13.2
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: pm msi bus_master cap_list
             configuration: driver=ehci_hcd latency=64 module=ehci_hcd
        *-serial
             description: SMBus
             product: IXP SB400 SMBus Controller
             vendor: ATI Technologies Inc
             physical id: 14
             bus info: pci@0000:00:14.0
             version: 11
             width: 32 bits
             clock: 66MHz
             capabilities: ht cap_list
             configuration: driver=piix4_smbus latency=0 module=i2c_piix4
        *-ide
             description: IDE interface
             product: IXP SB400 IDE Controller
             vendor: ATI Technologies Inc
             physical id: 14.1
             bus info: pci@0000:00:14.1
             logical name: scsi0
             logical name: scsi1
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: ide msi bus_master cap_list emulated
             configuration: driver=pata_atiixp latency=64 module=pata_atiixp
           *-disk
                description: ATA Disk
                product: FUJITSU MHV2080A
                vendor: Fujitsu
                physical id: 0
                bus info: scsi@0:0.0.0
                logical name: /dev/sda
                version: 0083
                serial: NT28T622CJT2
                size: 74GiB (80GB)
                capabilities: partitioned partitioned:dos
                configuration: ansiversion=5 signature=f98df98d
              *-volume:0
                   description: EXT3 volume
                   vendor: Linux
                   physical id: 1
                   bus info: scsi@0:0.0.0,1
                   logical name: /dev/sda1
                   logical name: /
                   logical name: /dev/.static/dev
                   version: 1.0
                   serial: 72cf8f2d-b458-4ca8-907d-d6b728fa17e0
                   size: 71GiB
                   capacity: 71GiB
                   capabilities: primary bootable journaled extended_attributes large_files huge_files recover ext3 ext2 initialized
                   configuration: created=2009-03-28 14:32:33 filesystem=ext3 modified=2009-03-28 15:17:36 mount.fstype=ext3 mount.options=ro,errors=remount-ro,data=ordered mounted=2009-03-28 15:10:46 state=mounted
              *-volume:1
                   description: Extended partition
                   physical id: 2
                   bus info: scsi@0:0.0.0,2
                   logical name: /dev/sda2
                   size: 3153MiB
                   capacity: 3153MiB
                   capabilities: primary extended partitioned partitioned:extended
                 *-logicalvolume
                      description: Linux swap / Solaris partition
                      physical id: 5
                      logical name: /dev/sda5
                      capacity: 3153MiB
                      capabilities: nofs
           *-cdrom
                description: DVD writer
                product: DVDRW   DVR-K15
                vendor: PIONEER
                physical id: 1
                bus info: scsi@1:0.0.0
                logical name: /dev/cdrom
                logical name: /dev/cdrw
                logical name: /dev/dvd
                logical name: /dev/dvdrw
                logical name: /dev/scd0
                logical name: /dev/sr0
                version: 1.12
                capabilities: removable audio cd-r cd-rw dvd dvd-r
                configuration: ansiversion=5 status=nodisc
        *-isa
             description: ISA bridge
             product: IXP SB400 PCI-ISA Bridge
             vendor: ATI Technologies Inc
             physical id: 14.3
             bus info: pci@0000:00:14.3
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: isa bus_master
             configuration: latency=0
        *-pci:2
             description: PCI bridge
             product: IXP SB400 PCI-PCI Bridge
             vendor: ATI Technologies Inc
             physical id: 14.4
             bus info: pci@0000:00:14.4
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: pci bus_master
           *-network:0
                description: Network controller
                product: BCM4311 [AirForce 54g] 802.11a/b/g PCI Express Transceiver
                vendor: Broadcom Corporation
                physical id: 2
                bus info: pci@0000:06:02.0
                version: 02
                width: 32 bits
                clock: 33MHz
                capabilities: bus_master
                configuration: driver=b43-pci-bridge latency=64 module=ssb
           *-pcmcia
                description: CardBus bridge
                product: PCIxx21/x515 Cardbus Controller
                vendor: Texas Instruments
                physical id: 4
                bus info: pci@0000:06:04.0
                version: 00
                width: 32 bits
                clock: 33MHz
                capabilities: pcmcia bus_master cap_list
                configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=192 module=yenta_socket
           *-firewire
                description: FireWire (IEEE 1394)
                product: OHCI Compliant IEEE 1394 Host Controller
                vendor: Texas Instruments
                physical id: 4.2
                bus info: pci@0000:06:04.2
                version: 00
                width: 32 bits
                clock: 33MHz
                capabilities: pm bus_master cap_list
                configuration: driver=ohci1394 latency=64 maxlatency=4 mingnt=2 module=ohci1394
           *-storage
                description: Mass storage controller
                product: PCIxx21 Integrated FlashMedia Controller
                vendor: Texas Instruments
                physical id: 4.3
                bus info: pci@0000:06:04.3
                version: 00
                width: 32 bits
                clock: 33MHz
                capabilities: storage pm bus_master cap_list
                configuration: driver=tifm_7xx1 latency=64 maxlatency=4 mingnt=7 module=tifm_7xx1
           *-system
                description: SD Host controller
                product: PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
                vendor: Texas Instruments
                physical id: 4.4
                bus info: pci@0000:06:04.4
                version: 00
                width: 32 bits
                clock: 33MHz
                capabilities: pm bus_master cap_list
                configuration: driver=sdhci-pci latency=64 maxlatency=4 mingnt=7 module=sdhci_pci
           *-network:1
                description: Ethernet interface
                product: RTL-8139/8139C/8139C+
                vendor: Realtek Semiconductor Co., Ltd.
                physical id: 6
                bus info: pci@0000:06:06.0
                logical name: eth0
                version: 10
                serial: 00:0f:b0:c0:e3:74
                size: 100MB/s
                capacity: 100MB/s
                width: 32 bits
                clock: 33MHz
                capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full ip=192.168.1.234 latency=128 link=yes maxlatency=64 mingnt=32 module=8139too multicast=yes port=MII speed=100MB/s
        *-multimedia
             description: Multimedia audio controller
             product: IXP SB400 AC'97 Audio Controller
             vendor: ATI Technologies Inc
             physical id: 14.5
             bus info: pci@0000:00:14.5
             version: 02
             width: 32 bits
             clock: 66MHz
             capabilities: msi bus_master cap_list
             configuration: driver=ATI IXP AC97 controller latency=64 mingnt=2 module=snd_atiixp
        *-communication
             description: Modem
             product: SB400 AC'97 Modem Controller
             vendor: ATI Technologies Inc
             physical id: 14.6
             bus info: pci@0000:00:14.6
             version: 02
             width: 32 bits
             clock: 66MHz
             capabilities: msi bus_master cap_list
             configuration: driver=ATI IXP MC97 controller latency=64 mingnt=2 module=snd_atiixp_modem
     *-pci:1
          description: Host bridge
          product: K8 [Athlon64/Opteron] HyperTransport Technology Configuration
          vendor: Advanced Micro Devices [AMD]
          physical id: 101
          bus info: pci@0000:00:18.0
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:2
          description: Host bridge
          product: K8 [Athlon64/Opteron] Address Map
          vendor: Advanced Micro Devices [AMD]
          physical id: 102
          bus info: pci@0000:00:18.1
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:3
          description: Host bridge
          product: K8 [Athlon64/Opteron] DRAM Controller
          vendor: Advanced Micro Devices [AMD]
          physical id: 103
          bus info: pci@0000:00:18.2
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:4
          description: Host bridge
          product: K8 [Athlon64/Opteron] Miscellaneous Control
          vendor: Advanced Micro Devices [AMD]
          physical id: 104
          bus info: pci@0000:00:18.3
          version: 00
          width: 32 bits
          clock: 33MHz
          configuration: driver=k8temp module=k8temp
  *-battery
       physical id: 1
       slot: Left Front
  *-network:0
       description: Wireless interface
       physical id: 2
       logical name: wlan0
       serial: 00:14:a5:4d:df:c5
       capabilities: ethernet physical wireless
       configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg
  *-network:1 DISABLED
       description: Ethernet interface
       physical id: 3
       logical name: pan0
       serial: aa:a8:3a:6e:da:5d
       capabilities: ethernet physical
       configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes
criceto@criceto-laptop:~$ 

Avatar utente
streetcross
Accecante Asceta
Accecante Asceta
Messaggi: 24943
Iscrizione: giovedì 7 febbraio 2008, 10:52
Contatti:

Re: periferiche usb scomparse(non vengono rilevate)

Messaggio da streetcross »

-usb:2
            description: USB Controller
            product: IXP SB400 USB2 Host Controller
            vendor: ATI Technologies Inc
            physical id: 13.2
            bus info: pci@0000:00:13.2
            version: 00
            width: 32 bits
            clock: 66MHz
            capabilities: pm msi bus_master cap_list
            configuration: driver=ehci_hcd latency=64 module=ehci_hcd
Ubuntu user #22995 Linux user #474679 Stacy can't you see, you're just not the girl for me, I know it might be wrong, but I'm in love with Stacy's Mom. ﺕ In molti credono di essere degli alternativi. In realtà la maggior parte di loro lascia la strada principale per seguire la seconda strada più battuta; in pochi si creano il proprio sentiero.
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: criceto45 e 9 ospiti