[Risolto] [Audio] HDA intel ALC662 Analog

Riconoscimento, installazione e configurazione delle periferiche.
ale.spitfire
Prode Principiante
Messaggi: 20
Iscrizione: domenica 21 settembre 2008, 14:34

[Risolto] [Audio] HDA intel ALC662 Analog

Messaggio da ale.spitfire »

Ciao a tutti,
ho appena installato Kubuntu su mio portatile, però ho riscontrato che la scheda audio ha qualche problema, infatti non funziona >:(
la scheda è una hda intel acl662, ho già provato a cercare in rete se qualcuno avesse il mio stesso problema ed ho riscontrato che è parecchio comune, ma nn ho trovato nessuna soluzione... ::)
Ragazzi ho bisogno di una mano...
:(
Grazie
Ultima modifica di ale.spitfire il venerdì 27 marzo 2009, 17:21, modificato 1 volta in totale.
Avatar utente
Guiodic
Accecante Asceta
Accecante Asceta
Messaggi: 28474
Iscrizione: martedì 24 aprile 2007, 15:28
Località: Roma
Contatti:

Re: [Audio] HDA intel ALC662 Analog

Messaggio da Guiodic »

dai:

Codice: Seleziona tutto

lspci 
lsmod | grep snd
cat /proc/asound/card0/codec#0 | grep -i codec
copia cosa esce.
ale.spitfire
Prode Principiante
Messaggi: 20
Iscrizione: domenica 21 settembre 2008, 14:34

Re: [Audio] HDA intel ALC662 Analog

Messaggio da ale.spitfire »

00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)                                                                                                               
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)   
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)                   
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
02:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
snd_hda_intel        384176  1
snd_pcm_oss            46848  0
snd_mixer_oss          22784  1 snd_pcm_oss
snd_pcm                83204  2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy          10884  0
snd_seq_oss            38528  0
snd_seq_midi          14336  0
snd_rawmidi            29824  1 snd_seq_midi
snd_seq_midi_event    15232  2 snd_seq_oss,snd_seq_midi
snd_seq                57776  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              29960  2 snd_pcm,snd_seq
snd_seq_device        15116  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd                    63268  11 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              15328  1 snd
snd_page_alloc        16136  2 snd_hda_intel,snd_pcm
Codec: Realtek ALC662


questo è quanto...
Grazie
Avatar utente
Guiodic
Accecante Asceta
Accecante Asceta
Messaggi: 28474
Iscrizione: martedì 24 aprile 2007, 15:28
Località: Roma
Contatti:

Re: [Audio] HDA intel ALC662 Analog

Messaggio da Guiodic »

marca e modello del computer?
ale.spitfire
Prode Principiante
Messaggi: 20
Iscrizione: domenica 21 settembre 2008, 14:34

Re: [Audio] HDA intel ALC662 Analog

Messaggio da ale.spitfire »

:-[
Il notebook è un Asus F6A-3p045c...
...
Avatar utente
Guiodic
Accecante Asceta
Accecante Asceta
Messaggi: 28474
Iscrizione: martedì 24 aprile 2007, 15:28
Località: Roma
Contatti:

Re: [Audio] HDA intel ALC662 Analog

Messaggio da Guiodic »

sudo gedit /etc/modprobe.d/alsa-base.conf

in fondo aggiungi una riga

options snd-hda-intel model=parametro position_fix=1

al posto di parametro

prova queste opzioni

          stack-dig
  3stack-6ch
  3stack-6ch-dig
  6stack-dig
          m51va
  g71v
  h13
  g50v
  asus-mode1
  asus-mode2
  asus-mode3
  asus-mode4
  asus-mode5
  asus-mode6

Ogni volta devi riavviare

quando il microfono funziona, se il volume è basso prova con position_fix=0 oppure 2 (non so se 3 vale, magari prova), altrimenti lo togli del tutto.
Ultima modifica di Guiodic il venerdì 27 marzo 2009, 14:40, modificato 1 volta in totale.
ale.spitfire
Prode Principiante
Messaggi: 20
Iscrizione: domenica 21 settembre 2008, 14:34

Re: [Audio] HDA intel ALC662 Analog

Messaggio da ale.spitfire »

Guiodic ha scritto: sudo gedit /etc/modprobe.d/alsa-base.conf

in fondo aggiungi una riga

options snd-hda-intel model=parametro position_fix=1

al posto di parametro

prova queste opzioni

          stack-dig
  3stack-6ch
  3stack-6ch-dig
  6stack-dig
          m51va
  g71v
  h13
  g50v
  asus-mode1
  asus-mode2
  asus-mode3
  asus-mode4
  asus-mode5
  asus-mode6

Ogni volta devi riavviare

quando il microfono funziona, se il volume è basso prova con position_fix=0 oppure 2 (non so se 3 vale, magari prova), altrimenti lo togli del tutto.
Da terminale
ale@ale:~$ sudo gedit /etc/modprobe.d/alsa-base.conf
[sudo] password for ale:
sudo: gedit: command not found

Perchè????
>:( >:(
Avatar utente
Guiodic
Accecante Asceta
Accecante Asceta
Messaggi: 28474
Iscrizione: martedì 24 aprile 2007, 15:28
Località: Roma
Contatti:

Re: [Audio] HDA intel ALC662 Analog

Messaggio da Guiodic »

perché si vede che usi kubuntu , quindi non hai gedit ma un altro editor, kate:

kdesu kate /etc/modprobe.d/alsa-base.conf

comunque prima accertati che i volumi siano tutti alzati sul mixer.
ale.spitfire
Prode Principiante
Messaggi: 20
Iscrizione: domenica 21 settembre 2008, 14:34

[Risolto] Re: [Audio] HDA intel ALC662 Analog

Messaggio da ale.spitfire »

Grazie a tutti x l'aiuto... (b2b)

Ho finalmente risolto,
aggiungendo quella riga nel mixer del volume mi sono comparsi tutti i controlli del volume, prima compariva solo front, alzandoli tutti finalmente si sente l'audio :D

Grazie ancora...
stUBUNTU86
Prode Principiante
Messaggi: 21
Iscrizione: giovedì 26 marzo 2009, 1:33

Re: [Risolto] [Audio] HDA intel ALC662 Analog

Messaggio da stUBUNTU86 »

ho anch'io lo stesso problema..quanti volumi ti spuntano sul mixer?? io faccio alsamixer -V all e me ne spuntano solo due...dovrebbero essere di più?
Avatar utente
Guiodic
Accecante Asceta
Accecante Asceta
Messaggi: 28474
Iscrizione: martedì 24 aprile 2007, 15:28
Località: Roma
Contatti:

Re: [Risolto] [Audio] HDA intel ALC662 Analog

Messaggio da Guiodic »

stUBUNTU86 ha scritto: ho anch'io lo stesso problema..quanti volumi ti spuntano sul mixer?? io faccio alsamixer -V all e me ne spuntano solo due...dovrebbero essere di più?
alsamixer -Dhw

comunque esiste la bella interfaccia grafica di gnome (o di kde se usi kde) non c'è bisogno di alsamixer da terminale
stUBUNTU86
Prode Principiante
Messaggi: 21
Iscrizione: giovedì 26 marzo 2009, 1:33

Re: [Risolto] [Audio] HDA intel ALC662 Analog

Messaggio da stUBUNTU86 »

questo è quello che mi spunta con alsamixer -dhw
Allegati
Schermata.jpg
Avatar utente
Guiodic
Accecante Asceta
Accecante Asceta
Messaggi: 28474
Iscrizione: martedì 24 aprile 2007, 15:28
Località: Roma
Contatti:

Re: [Risolto] [Audio] HDA intel ALC662 Analog

Messaggio da Guiodic »

dai gli stessi comandi che ho detto a lui, quelli nel primo post.
stUBUNTU86
Prode Principiante
Messaggi: 21
Iscrizione: giovedì 26 marzo 2009, 1:33

Re: [Risolto] [Audio] HDA intel ALC662 Analog

Messaggio da stUBUNTU86 »

00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 9300M GS (rev a1)
03:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
09:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
09:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
09:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
09:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
stefano@stefano-laptop:~$ lsmod | grep snd
snd_hda_intel        384176  3
snd_pcm_oss            46848  0
snd_mixer_oss          22784  1 snd_pcm_oss
snd_pcm                83204  2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy          10884  0
snd_seq_oss            38528  0
snd_seq_midi          14336  0
snd_rawmidi            29824  1 snd_seq_midi
snd_seq_midi_event    15232  2 snd_seq_oss,snd_seq_midi
snd_seq                57776  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              29960  2 snd_pcm,snd_seq
snd_seq_device        15116  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd                    63268  15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              15328  1 snd
snd_page_alloc        16136  2 snd_hda_intel,snd_pcm
stefano@stefano-laptop:~$ cat /proc/asound/card0/codec#0 | grep -i codec
shouldes
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 19490
Iscrizione: domenica 10 febbraio 2008, 21:45

Re: [Risolto] [Audio] HDA intel ALC662 Analog

Messaggio da shouldes »

options snd-hda-intel model=asus position_fix=1



Dimenticavo, controlla in dmesg se non da errori nel buffer della scheda audio, se non li da puoi levare position_fix (siccome conosco il portatile so che lo da senza quel parametro).
Ultima modifica di shouldes il venerdì 27 marzo 2009, 17:58, modificato 1 volta in totale.
stUBUNTU86
Prode Principiante
Messaggi: 21
Iscrizione: giovedì 26 marzo 2009, 1:33

Re: [Risolto] [Audio] HDA intel ALC662 Analog

Messaggio da stUBUNTU86 »

dmesg:

[    0.743497] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
[    0.743502] pci 0000:00:1c.5:  IO window: 0xe000-0xefff
[    0.743509] pci 0000:00:1c.5:  MEM window: 0xfde00000-0xfdefffff
[    0.743515] pci 0000:00:1c.5:  PREFETCH window: 0x000000f6f00000-0x000000f6ffffff
[    0.743525] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
[    0.743527] pci 0000:00:1e.0:  IO window: disabled
[    0.743534] pci 0000:00:1e.0:  MEM window: 0xfdf00000-0xfdffffff
[    0.743540] pci 0000:00:1e.0:  PREFETCH window: disabled
[    0.743556] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.743561] pci 0000:00:01.0: setting latency timer to 64
[    0.743571] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.743577] pci 0000:00:1c.0: setting latency timer to 64
[    0.743588] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.743594] pci 0000:00:1c.1: setting latency timer to 64
[    0.743605] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.743612] pci 0000:00:1c.2: setting latency timer to 64
[    0.743623] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.743629] pci 0000:00:1c.3: setting latency timer to 64
[    0.743639] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.743645] pci 0000:00:1c.4: setting latency timer to 64
[    0.743655] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.743662] pci 0000:00:1c.5: setting latency timer to 64
[    0.743671] pci 0000:00:1e.0: setting latency timer to 64
[    0.743676] bus: 00 index 0 io port: [0, ffff]
[    0.743679] bus: 00 index 1 mmio: [0, ffffffff]
[    0.743681] bus: 01 index 0 io port: [c000, cfff]
[    0.743684] bus: 01 index 1 mmio: [f8000000, fbffffff]
[    0.743686] bus: 01 index 2 mmio: [d0000000, dfffffff]
[    0.743689] bus: 01 index 3 mmio: [0, 0]
[    0.743691] bus: 02 index 0 mmio: [0, 0]
[    0.743694] bus: 02 index 1 mmio: [0, 0]
[    0.743696] bus: 02 index 2 mmio: [0, 0]
[    0.743698] bus: 02 index 3 mmio: [0, 0]
[    0.743700] bus: 03 index 0 mmio: [0, 0]
[    0.743702] bus: 03 index 1 mmio: [fcf00000, fcffffff]
[    0.743705] bus: 03 index 2 mmio: [0, 0]
[    0.743707] bus: 03 index 3 mmio: [0, 0]
[    0.743710] bus: 04 index 0 io port: [d000, dfff]
[    0.743712] bus: 04 index 1 mmio: [fd000000, fddfffff]
[    0.743715] bus: 04 index 2 mmio: [f4000000, f6efffff]
[    0.743717] bus: 04 index 3 mmio: [0, 0]
[    0.743719] bus: 06 index 0 mmio: [0, 0]
[    0.743721] bus: 06 index 1 mmio: [0, 0]
[    0.743723] bus: 06 index 2 mmio: [0, 0]
[    0.743725] bus: 06 index 3 mmio: [0, 0]
[    0.743728] bus: 07 index 0 mmio: [0, 0]
[    0.743730] bus: 07 index 1 mmio: [0, 0]
[    0.743732] bus: 07 index 2 mmio: [0, 0]
[    0.743734] bus: 07 index 3 mmio: [0, 0]
[    0.743737] bus: 08 index 0 io port: [e000, efff]
[    0.743739] bus: 08 index 1 mmio: [fde00000, fdefffff]
[    0.743742] bus: 08 index 2 mmio: [f6f00000, f6ffffff]
[    0.743744] bus: 08 index 3 mmio: [0, 0]
[    0.743746] bus: 09 index 0 mmio: [0, 0]
[    0.743748] bus: 09 index 1 mmio: [fdf00000, fdffffff]
[    0.743751] bus: 09 index 2 mmio: [0, 0]
[    0.743753] bus: 09 index 3 io port: [0, ffff]
[    0.743755] bus: 09 index 4 mmio: [0, ffffffff]
[    0.743764] NET: Registered protocol family 2
[    0.756057] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.756307] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.756611] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.756771] TCP: Hash tables configured (established 131072 bind 65536)
[    0.756775] TCP reno registered
[    0.760066] NET: Registered protocol family 1
[    0.760180] checking if image is initramfs... it is
[    1.619188] Freeing initrd memory: 8017k freed
[    1.619357] Simple Boot Flag at 0x51 set to 0x1
[    1.620391] audit: initializing netlink socket (disabled)
[    1.620414] type=2000 audit(1238202075.616:1): initialized
[    1.628707] highmem bounce pool size: 64 pages
[    1.628713] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.631391] VFS: Disk quotas dquot_6.5.1
[    1.631484] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.631597] msgmni has been set to 1725
[    1.631729] io scheduler noop registered
[    1.631733] io scheduler anticipatory registered
[    1.631736] io scheduler deadline registered
[    1.631750] io scheduler cfq registered (default)
[    1.631940] pci 0000:01:00.0: Boot video device
[    1.632084] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    1.632125] pcieport-driver 0000:00:01.0: found MSI capability
[    1.632159] pci_express 0000:00:01.0:pcie00: allocate port service
[    1.632205] pci_express 0000:00:01.0:pcie02: allocate port service
[    1.632248] pci_express 0000:00:01.0:pcie03: allocate port service
[    1.632350] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    1.632402] pcieport-driver 0000:00:1c.0: found MSI capability
[    1.632454] pci_express 0000:00:1c.0:pcie00: allocate port service
[    1.632497] pci_express 0000:00:1c.0:pcie03: allocate port service
[    1.632618] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    1.632670] pcieport-driver 0000:00:1c.1: found MSI capability
[    1.632723] pci_express 0000:00:1c.1:pcie00: allocate port service
[    1.632770] pci_express 0000:00:1c.1:pcie03: allocate port service
[    1.632894] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    1.632948] pcieport-driver 0000:00:1c.2: found MSI capability
[    1.633005] pci_express 0000:00:1c.2:pcie00: allocate port service
[    1.633051] pci_express 0000:00:1c.2:pcie02: allocate port service
[    1.633096] pci_express 0000:00:1c.2:pcie03: allocate port service
[    1.633222] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[    1.633276] pcieport-driver 0000:00:1c.3: found MSI capability
[    1.633329] pci_express 0000:00:1c.3:pcie00: allocate port service
[    1.633374] pci_express 0000:00:1c.3:pcie02: allocate port service
[    1.633421] pci_express 0000:00:1c.3:pcie03: allocate port service
[    1.633545] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[    1.633597] pcieport-driver 0000:00:1c.4: found MSI capability
[    1.633650] pci_express 0000:00:1c.4:pcie00: allocate port service
[    1.633698] pci_express 0000:00:1c.4:pcie03: allocate port service
[    1.633822] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[    1.633875] pcieport-driver 0000:00:1c.5: found MSI capability
[    1.633927] pci_express 0000:00:1c.5:pcie00: allocate port service
[    1.633982] pci_express 0000:00:1c.5:pcie03: allocate port service
[    1.634381] isapnp: Scanning for PnP cards...
[    1.989952] isapnp: No Plug & Play device found
[    2.027734] hpet_resources: 0xfed00000 is busy
[    2.027838] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    2.030332] brd: module loaded
[    2.030407] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    2.030548] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    2.033796] i8042.c: Detected active multiplexing controller, rev 1.1.
[    2.035083] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.035089] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.035092] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.035094] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.035097] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.035450] mice: PS/2 mouse device common for all mice
[    2.035585] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    2.035616] rtc0: alarms up to one month, y3k, hpet irqs
[    2.035757] EISA: Probing bus 0 at eisa.0
[    2.035792] EISA: Detected 0 cards.
[    2.035795] cpuidle: using governor ladder
[    2.035798] cpuidle: using governor menu
[    2.036381] TCP cubic registered
[    2.036410] Using IPI No-Shortcut mode
[    2.036600] registered taskstats version 1
[    2.036740]  Magic number: 1:150:4
[    2.036747] tty ttybf: hash matches
[    2.036808] rtc_cmos 00:03: setting system clock to 2009-03-28 01:01:17 UTC (1238202077)
[    2.036812] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.036814] EDD information not available.
[    2.037030] Freeing unused kernel memory: 424k freed
[    2.037076] Write protecting the kernel text: 2580k
[    2.037108] Write protecting the kernel read-only data: 940k
[    2.072797] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    2.220878] fuse init (API version 7.9)
[    2.294114] ACPI: SSDT BFF96BC0, 0248 (r1  PmRef  Cpu0Ist    3000 INTL 20051117)
[    2.294813] ACPI: SSDT BFF96EA0, 0765 (r1  PmRef  Cpu0Cst    3001 INTL 20051117)
[    2.296037] Monitor-Mwait will be used to enter C-1 state
[    2.296041] Monitor-Mwait will be used to enter C-2 state
[    2.296044] Monitor-Mwait will be used to enter C-3 state
[    2.320161] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    2.320219] processor ACPI0007:00: registered as cooling_device0
[    2.320224] ACPI: Processor [P001] (supports 8 throttling states)
[    2.320649] ACPI: SSDT BFF96AF0, 00CC (r1  PmRef  Cpu1Ist    3000 INTL 20051117)
[    2.321290] ACPI: SSDT BFF96E10, 0085 (r1  PmRef  Cpu1Cst    3000 INTL 20051117)
[    2.322784] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    2.322837] processor ACPI0007:01: registered as cooling_device1
[    2.322842] ACPI: Processor [P002] (supports 8 throttling states)
[    2.325800] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    2.326120] Marking TSC unstable due to TSC halts in idle
[    2.332159] ACPI: Expecting a [Reference] package element, found type C
[    2.332494] thermal LNXTHERM:01: registered as thermal_zone0
[    2.335609] ACPI: Thermal Zone [THRM] (39 C)
[    2.652607] usbcore: registered new interface driver usbfs
[    2.652631] usbcore: registered new interface driver hub
[    2.652675] usbcore: registered new device driver usb
[    2.655226] USB Universal Host Controller Interface driver v3.0
[    2.657060] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.657070] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.657075] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    2.657117] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.657153] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
[    2.657280] usb usb1: configuration #1 chosen from 1 choice
[    2.657311] hub 1-0:1.0: USB hub found
[    2.657318] hub 1-0:1.0: 2 ports detected
[    2.707847] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    2.761228] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    2.761238] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    2.761243] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    2.761270] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    2.761305] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    2.761406] usb usb2: configuration #1 chosen from 1 choice
[    2.761437] hub 2-0:1.0: USB hub found
[    2.761444] hub 2-0:1.0: 2 ports detected
[    2.814567] No dock devices found.
[    2.832205] SCSI subsystem initialized
[    2.866066] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    2.866078] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    2.866083] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    2.866109] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[    2.866145] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
[    2.866242] usb usb3: configuration #1 chosen from 1 choice
[    2.866272] hub 3-0:1.0: USB hub found
[    2.866279] hub 3-0:1.0: 2 ports detected
[    2.866323] libata version 3.00 loaded.
[    3.073286] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.073302] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    3.073306] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    3.073335] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4
[    3.077244] ehci_hcd 0000:00:1a.7: debug port 1
[    3.077252] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    3.077267] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fffc00
[    3.185126] usb 3-1: new full speed USB device using uhci_hcd and address 2
[    3.196135] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.196285] usb usb4: configuration #1 chosen from 1 choice
[    3.196319] hub 4-0:1.0: USB hub found
[    3.196330] hub 4-0:1.0: 6 ports detected
[    3.252175] hub 3-0:1.0: unable to enumerate USB device on port 1
[    3.404471] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.404482] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.404487] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.404518] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    3.404556] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[    3.404661] usb usb5: configuration #1 chosen from 1 choice
[    3.404692] hub 5-0:1.0: USB hub found
[    3.404700] hub 5-0:1.0: 2 ports detected
[    3.500043] Clocksource tsc unstable (delta = -296545514 ns)
[    3.508385] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.508396] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    3.508400] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.508431] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    3.508461] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    3.508569] usb usb6: configuration #1 chosen from 1 choice
[    3.508601] hub 6-0:1.0: USB hub found
[    3.508608] hub 6-0:1.0: 2 ports detected
[    3.612607] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.612619] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    3.612623] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.612660] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    3.612691] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
[    3.612829] usb usb7: configuration #1 chosen from 1 choice
[    3.612862] hub 7-0:1.0: USB hub found
[    3.612870] hub 7-0:1.0: 2 ports detected
[    3.820667] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.820685] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    3.820690] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.820729] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[    3.824628] ehci_hcd 0000:00:1d.7: debug port 1
[    3.824636] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    3.824645] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7fff800
[    3.872309] usb 3-1: new full speed USB device using uhci_hcd and address 3
[    3.884303] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.884459] usb usb8: configuration #1 chosen from 1 choice
[    3.884494] hub 8-0:1.0: USB hub found
[    3.884505] hub 8-0:1.0: 6 ports detected
[    4.049747] usb 3-1: configuration #1 chosen from 1 choice
[    4.095372] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.095378] ohci1394 0000:09:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.095408] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    4.095450] r8169 0000:08:00.0: setting latency timer to 64
[    4.095990] eth0: RTL8168c/8111c at 0xf8858000, 00:22:15:29:6d:e1, XID 3c4000c0 IRQ 216
[    4.097664] ahci 0000:00:1f.2: version 3.0
[    4.097675] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    4.097787] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
[    4.097792] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems
[    4.097798] ahci 0000:00:1f.2: setting latency timer to 64
[    4.148093] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[fdfff800-fdffffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    4.163832] scsi0 : ahci
[    4.168437] scsi1 : ahci
[    4.168506] scsi2 : ahci
[    4.168573] scsi3 : ahci
[    4.168639] scsi4 : ahci
[    4.168705] scsi5 : ahci
[    4.168980] ata1: SATA max UDMA/133 abar m2048@0xf7fff000 port 0xf7fff100 irq 215
[    4.168984] ata2: SATA max UDMA/133 abar m2048@0xf7fff000 port 0xf7fff180 irq 215
[    4.168987] ata3: DUMMY
[    4.168989] ata4: DUMMY
[    4.168991] ata5: DUMMY
[    4.168994] ata6: SATA max UDMA/133 abar m2048@0xf7fff000 port 0xf7fff380 irq 215
[    4.324121] usb 3-2: new full speed USB device using uhci_hcd and address 4
[    4.486369] usb 3-2: configuration #1 chosen from 1 choice
[    4.488129] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.489848] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[    4.490183] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[    4.490398] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
[    4.491291] ata1.00: ATA-8: Hitachi HTS545050KTA300, BKFOC60G, max UDMA/133
[    4.491295] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    4.493160] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[    4.493376] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[    4.493591] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
[    4.494543] ata1.00: configured for UDMA/133
[    4.728311] usb 8-5: new high speed USB device using ehci_hcd and address 2
[    4.863181] usb 8-5: configuration #1 chosen from 1 choice
[    5.232319] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.235326] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[    5.235485] ata2.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
[    5.237292] ata2.00: ATAPI: Optiarc BD ROM BC-5500S, 1.C0, max UDMA/100
[    5.240881] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[    5.241026] ata2.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
[    5.242848] ata2.00: configured for UDMA/100
[    5.436914] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c0001521f0b]
[    5.576309] ata6: SATA link down (SStatus 0 SControl 300)
[    5.592426] scsi 0:0:0:0: Direct-Access    ATA      Hitachi HTS54505 BKFO PQ: 0 ANSI: 5
[    5.593688] scsi 1:0:0:0: CD-ROM            Optiarc  BD ROM BC-5500S  1.C0 PQ: 0 ANSI: 5
[    5.602841] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    5.602884] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[    5.624095] Driver 'sr' needs updating - please use bus_type methods
[    5.628651] Driver 'sd' needs updating - please use bus_type methods
[    5.628738] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[    5.628756] sd 0:0:0:0: [sda] Write Protect is off
[    5.628759] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.628789] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.628863] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[    5.628893] sd 0:0:0:0: [sda] Write Protect is off
[    5.628896] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.628926] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.628930]  sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.630865] Uniform CD-ROM driver Revision: 3.20
[    5.630947] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    5.647281]  sda1 sda2
[    5.663999] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.833851] PM: Starting manual resume from disk
[    5.833855] PM: Resume from partition 8:5
[    5.833858] PM: Checking hibernation image.
[    5.834029] PM: Resume from disk failed.
[    5.893832] kjournald starting.  Commit interval 5 seconds
[    5.893873] EXT3-fs: mounted filesystem with ordered data mode.
[  11.489207] udevd version 124 started
[  11.920134] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  12.029171] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  12.121964] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[  12.145027] ACPI: Power Button (FF) [PWRF]
[  12.145160] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[  12.177022] ACPI: Sleep Button (CM) [SLPB]
[  12.177086] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[  12.177545] Linux agpgart interface v0.103
[  12.181583] ACPI: Lid Switch [liD]
[  12.421149] asus-laptop: Asus Laptop Support version 0.42
[  12.425962] asus-laptop:  M50Vc model detected
[  12.440382] Registered led device: asus::mail
[  12.440416] Registered led device: asus::touchpad
[  12.537447] ACPI: Battery Slot [BAT0] (battery present)
[  12.537725] ACPI: AC Adapter [AC0] (off-line)
[  12.634460] acpi device:1e: registered as cooling_device2
[  12.634680] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/device:1a/input/input5
[  12.653023] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[  12.908748] nvidia: module license 'NVIDIA' taints kernel.
[  13.221889] Bluetooth: Core ver 2.13
[  13.226696] NET: Registered protocol family 31
[  13.226699] Bluetooth: HCI device and connection manager initialized
[  13.226703] Bluetooth: HCI socket layer initialized
[  13.351295] Bluetooth: Generic Bluetooth USB driver ver 0.3
[  13.351471] usbcore: registered new interface driver btusb
[  13.394231] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  13.394248] nvidia 0000:01:00.0: setting latency timer to 64
[  13.394384] NVRM: loading NVIDIA UNIX x86 Kernel Module  177.82  Tue Nov  4 13:35:57 PST 2008
[  13.547242] sdhci: Secure Digital Host Controller Interface driver
[  13.547246] sdhci: Copyright(c) Pierre Ossman
[  13.605468] sdhci-pci 0000:09:01.1: SDHCI controller found [1180:0822] (rev 22)
[  13.605486] sdhci-pci 0000:09:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[  13.608545] mmc0: SDHCI controller on PCI [0000:09:01.1] using PIO
[  13.728381] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[  13.728410] HDA Intel 0000:00:1b.0: setting latency timer to 64
[  13.766810] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
[  13.801947] Linux video capture interface: v2.00
[  13.826741] input: PC Speaker as /devices/platform/pcspkr/input/input6
[  13.856445] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[  13.856449] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[  13.878150] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[  13.878189] iwlagn 0000:03:00.0: setting latency timer to 64
[  13.878231] iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[  13.910651] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
[  13.911685] iwlagn 0000:03:00.0: PCI INT A disabled
[  13.912133] phy0: Selected rate control algorithm 'iwl-agn-rs'
[  13.954001] uvcvideo: Found UVC 1.00 device USB2.0 1.3M UVC WebCam (04f2:b033)
[  13.954319] input: USB2.0 1.3M UVC WebCam as /devices/pci0000:00/0000:00:1d.7/usb8/8-5/8-5:1.0/input/input7
[  14.093203] usbcore: registered new interface driver uvcvideo
[  14.093208] USB Video Class driver (v0.1.0)
[  14.549771] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x280b1, caps: 0xb04711/0x60040d
[  14.589763] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[  15.515294] lp: driver loaded but no devices found
[  15.693494] Adding 1751076k swap on /dev/sda5.  Priority:-1 extents:1 across:1751076k
[  15.718631] EXT3 FS on sda1, internal journal
[  16.022165] kjournald starting.  Commit interval 5 seconds
[  16.022654] EXT3 FS on sda6, internal journal
[  16.022659] EXT3-fs: mounted filesystem with ordered data mode.
[  16.245261] type=1505 audit(1238202091.884:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4332
[  16.434240] type=1505 audit(1238202092.072:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4337
[  16.434424] type=1505 audit(1238202092.072:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4337
[  16.611930] ip_tables: (C) 2000-2006 Netfilter Core Team
[  16.660901] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[  16.660988] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
[  16.661187] firmware: requesting iwlwifi-5000-1.ucode
[  18.850927] Registered led device: iwl-phy0:radio
[  18.850948] Registered led device: iwl-phy0:assoc
[  18.850966] Registered led device: iwl-phy0:RX
[  18.850986] Registered led device: iwl-phy0:TX
[  19.139311] PPP generic driver version 2.4.2
[  19.169773] NET: Registered protocol family 17
[  19.237573] NET: Registered protocol family 10
[  19.238168] lo: Disabled Privacy Extensions
[  19.239500] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  19.835825] ACPI: WMI: Mapper loaded
[  20.567419] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[  20.641193] apm: BIOS not found.
[  20.767251] ppdev: user-space parallel port driver
[  24.830368] Bluetooth: L2CAP ver 2.11
[  24.830381] Bluetooth: L2CAP socket layer initialized
[  24.903409] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  24.903423] Bluetooth: BNEP filters: protocol multicast
[  24.973493] Bridge firewalling registered
[  25.014580] Bluetooth: SCO (Voice Link) ver 0.6
[  25.014592] Bluetooth: SCO socket layer initialized
[  25.112711] Bluetooth: RFCOMM socket layer initialized
[  25.113724] Bluetooth: RFCOMM TTY layer initialized
[  25.113734] Bluetooth: RFCOMM ver 1.10
[  25.804355] r8169: eth0: link down
[  25.805551] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  30.671952] iwlagn 0000:03:00.0: PCI INT A disabled
[  32.090168] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[  32.090251] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
[  32.111719] Registered led device: iwl-phy0:radio
[  32.111819] Registered led device: iwl-phy0:assoc
[  32.111915] Registered led device: iwl-phy0:RX
[  32.112008] Registered led device: iwl-phy0:TX
[  32.149545] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  32.362325] wlan0: authenticate with AP 00:1d:6a:d8:87:8a
[  32.362341] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[  32.363928] wlan0: authenticate with AP 00:1d:6a:d8:87:8a
[  32.363940] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[  32.364932] wlan0: authenticated
[  32.364938] wlan0: associate with AP 00:1d:6a:d8:87:8a
[  32.364941] wlan0: mismatch in privacy configuration and mixed-cell disabled - abort association
[  32.444508] wlan0: authenticate with AP 00:1d:6a:d8:87:8a
[  32.446522] wlan0: authenticated
[  32.446528] wlan0: associate with AP 00:1d:6a:d8:87:8a
[  32.449645] wlan0: RX AssocResp from 00:1d:6a:d8:87:8a (capab=0x431 status=0 aid=1)
[  32.449649] wlan0: associated
[  32.460147] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  42.584067] wlan0: no IPv6 routers present
[  69.242867] CPU0 attaching NULL sched-domain.
[  69.242892] CPU1 attaching NULL sched-domain.
[  69.244662] CPU0 attaching sched-domain:
[  69.244672]  domain 0: span 0-1 level MC
[  69.244679]  groups: 0 1
[  69.244689]  domain 1: span 0-1 level CPU
[  69.244695]    groups: 0-1
[  69.244705] CPU1 attaching sched-domain:
[  69.244711]  domain 0: span 0-1 level MC
[  69.244717]  groups: 1 0
[  69.244725]  domain 1: span 0-1 level CPU
[  69.244731]    groups: 0-1
[  185.929051] CE: hpet increasing min_delta_ns to 15000 nsec
[  342.229062] CE: hpet increasing min_delta_ns to 22500 nsec
[  735.620122] usb 6-1: new low speed USB device using uhci_hcd and address 2
[  735.797072] usb 6-1: configuration #1 chosen from 1 choice
[  735.978385] usbcore: registered new interface driver hiddev
[  735.991829] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input9
[  736.000428] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-1
[  736.000487] usbcore: registered new interface driver usbhid
[  736.000495] usbhid: v2.6:USB HID core driver
stUBUNTU86
Prode Principiante
Messaggi: 21
Iscrizione: giovedì 26 marzo 2009, 1:33

Re: [Risolto] [Audio] HDA intel ALC662 Analog

Messaggio da stUBUNTU86 »

ho provato a dare il comando con e senza position_fix ho riavviato il pc entrambe le volte ma non è cambiato niente..l'audio è sempre muto.. :(
credo che per la prima volta nella mia vita mi rivolgerò alla religione...  (bad)
no aiutatemi voi vi pregooooooooooooooooo!!!!!!!!  comunque grazie già per gli sforzi e i consigli che mi avete dato..spero si risolva
ale.spitfire
Prode Principiante
Messaggi: 20
Iscrizione: domenica 21 settembre 2008, 14:34

Re: [Risolto] [Audio] HDA intel ALC662 Analog

Messaggio da ale.spitfire »

tu usi ubuntu o kubuntu?
shouldes
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 19490
Iscrizione: domenica 10 febbraio 2008, 21:45

Re: [Risolto] [Audio] HDA intel ALC662 Analog

Messaggio da shouldes »

ale.spitfire ha scritto: tu usi ubuntu o kubuntu?
Io dopo aver inserito la stringa che ho postato, ho fatto doppio click sull'icona del pannello di gnome, dalle preferenze ho fatto spuntare tutte le voci che mi servivano, ho smanettato un po' e tutto funzionava alla perfezione.

Il bios installato era l'ultima versione, il pc di mio cugino.
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 12 ospiti