[Boot] Niente splash screen all'avvio
-
emanuele19956
- Prode Principiante
- Messaggi: 219
- Iscrizione: venerdì 26 dicembre 2008, 22:17
- Località: Lanuvio (RM)
[Boot] Niente splash screen all'avvio
Ciao a tutti.
Come avrete notato, all'ecensione del pc, la barra scorre prima da una parte all'altra e poi inizia il vero e proprio caricamento. Ho Ubuntu 9.04, ma il problema c'era anche con l'8.10, in quanto non ha fatto un'installazione pulita bensì un avanzamento. Praticamente Quando accendo il PC, quando la barra scorre da una parte all'altra la vedo, ma quando inizia il caricamento vero e proprio (quando la barra scorre lentamente da sinistra verso destra), vedo le operazioni che il PC compie all'avvio. Mi appare:
Reading files needed to boot...
Loading hardware drivers...
Eccetera eccetera. Allo spegnimento, la stessa cosa, niente splash, solo queste scritte.
Come avrete notato, all'ecensione del pc, la barra scorre prima da una parte all'altra e poi inizia il vero e proprio caricamento. Ho Ubuntu 9.04, ma il problema c'era anche con l'8.10, in quanto non ha fatto un'installazione pulita bensì un avanzamento. Praticamente Quando accendo il PC, quando la barra scorre da una parte all'altra la vedo, ma quando inizia il caricamento vero e proprio (quando la barra scorre lentamente da sinistra verso destra), vedo le operazioni che il PC compie all'avvio. Mi appare:
Reading files needed to boot...
Loading hardware drivers...
Eccetera eccetera. Allo spegnimento, la stessa cosa, niente splash, solo queste scritte.
Ultima modifica di emanuele19956 il giovedì 7 maggio 2009, 11:23, modificato 1 volta in totale.
- steff
- Moderatore Globale

- Messaggi: 40367
- Iscrizione: domenica 18 febbraio 2007, 19:48
- Desktop: LXQt+labwc
- Distribuzione: Arch; Debian; Ubuntu Server
- Sesso: Maschile
- Località: Toscana
- Contatti:
Re: [Boot] avvio strano
Io leggo sempre le scritte così vedo cosa non va nel caso, per questo puoi disabilitare lo splash:
e togli quiet splash nella riga "kernel" della prima voce del menu, verso la fine del file, tipo
kernel /vmlinuz-2.6.20-16-generic root=UUID=5399be27-7374-48e0-ae5e-ed679f21139f ro quiet splash locale=it_IT
in alternativa puoi usare alt+f1 per vederle solo al momento
Codice: Seleziona tutto
sudo gedit /boot/grub/menu.lstkernel /vmlinuz-2.6.20-16-generic root=UUID=5399be27-7374-48e0-ae5e-ed679f21139f ro quiet splash locale=it_IT
in alternativa puoi usare alt+f1 per vederle solo al momento
Hai fatto un backup oggi? Ieri?? Quando???
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
- Pazzoinformatico
- Scoppiettante Seguace

- Messaggi: 667
- Iscrizione: domenica 29 marzo 2009, 22:52
- Contatti:
Re: [Boot] avvio strano
Per sicurezza ti lascio il mio /boot/grub/menu.lst non si sa mai!
Codice: Seleziona tutto
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=c9923c95-4a44-4ef9-add4-2ac52d7fe23c ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=c9923c95-4a44-4ef9-add4-2ac52d7fe23c
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 8.10, kernel 2.6.27-11-generic
uuid c9923c95-4a44-4ef9-add4-2ac52d7fe23c
kernel /boot/vmlinuz-2.6.27-11-generic root=UUID=c9923c95-4a44-4ef9-add4-2ac52d7fe23c ro quiet splash
initrd /boot/initrd.img-2.6.27-11-generic
quiet
title Ubuntu 8.10, kernel 2.6.27-11-generic (recovery mode)
uuid c9923c95-4a44-4ef9-add4-2ac52d7fe23c
kernel /boot/vmlinuz-2.6.27-11-generic root=UUID=c9923c95-4a44-4ef9-add4-2ac52d7fe23c ro single
initrd /boot/initrd.img-2.6.27-11-generic
title Ubuntu 8.10, kernel 2.6.27-7-generic
uuid c9923c95-4a44-4ef9-add4-2ac52d7fe23c
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=c9923c95-4a44-4ef9-add4-2ac52d7fe23c ro quiet splash
initrd /boot/initrd.img-2.6.27-7-generic
quiet
title Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode)
uuid c9923c95-4a44-4ef9-add4-2ac52d7fe23c
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=c9923c95-4a44-4ef9-add4-2ac52d7fe23c ro single
initrd /boot/initrd.img-2.6.27-7-generic
title Ubuntu 8.10, memtest86+
uuid c9923c95-4a44-4ef9-add4-2ac52d7fe23c
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows Vista/Longhorn (loader)
root (hd0,0)
savedefault
makeactive
chainloader +1
Sul mio blog trovate le guide per la configurazione di skype,ams,Microsoft windows xp in macchina virtuale e l'eliminazione definitiva di programmi installati in wine.
- Pazzoinformatico
- Scoppiettante Seguace

- Messaggi: 667
- Iscrizione: domenica 29 marzo 2009, 22:52
- Contatti:
Re: [Boot] avvio strano
Mi sa che dovrebbe venire cosi
Codice: Seleziona tutto
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=c9923c95-4a44-4ef9-add4-2ac52d7fe23c ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=c9923c95-4a44-4ef9-add4-2ac52d7fe23c
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 8.10, kernel 2.6.27-11-generic
uuid c9923c95-4a44-4ef9-add4-2ac52d7fe23c
kernel /boot/vmlinuz-2.6.27-11-generic root=UUID=c9923c95-4a44-4ef9-add4-2ac52d7fe23c ro
initrd /boot/initrd.img-2.6.27-11-generic
quiet
title Ubuntu 8.10, kernel 2.6.27-11-generic (recovery mode)
uuid c9923c95-4a44-4ef9-add4-2ac52d7fe23c
kernel /boot/vmlinuz-2.6.27-11-generic root=UUID=c9923c95-4a44-4ef9-add4-2ac52d7fe23c ro single
initrd /boot/initrd.img-2.6.27-11-generic
title Ubuntu 8.10, kernel 2.6.27-7-generic
uuid c9923c95-4a44-4ef9-add4-2ac52d7fe23c
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=c9923c95-4a44-4ef9-add4-2ac52d7fe23c ro quiet splash
initrd /boot/initrd.img-2.6.27-7-generic
quiet
title Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode)
uuid c9923c95-4a44-4ef9-add4-2ac52d7fe23c
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=c9923c95-4a44-4ef9-add4-2ac52d7fe23c ro single
initrd /boot/initrd.img-2.6.27-7-generic
title Ubuntu 8.10, memtest86+
uuid c9923c95-4a44-4ef9-add4-2ac52d7fe23c
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows Vista/Longhorn (loader)
root (hd0,0)
savedefault
makeactive
chainloader +1Sul mio blog trovate le guide per la configurazione di skype,ams,Microsoft windows xp in macchina virtuale e l'eliminazione definitiva di programmi installati in wine.
- steff
- Moderatore Globale

- Messaggi: 40367
- Iscrizione: domenica 18 febbraio 2007, 19:48
- Desktop: LXQt+labwc
- Distribuzione: Arch; Debian; Ubuntu Server
- Sesso: Maschile
- Località: Toscana
- Contatti:
Re: [Boot] avvio strano
Ora hai una copia di backup qui 
Dovrebbe andar bene.
Dovrebbe andar bene.
Hai fatto un backup oggi? Ieri?? Quando???
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
-
emanuele19956
- Prode Principiante
- Messaggi: 219
- Iscrizione: venerdì 26 dicembre 2008, 22:17
- Località: Lanuvio (RM)
Re: [Boot] avvio strano
grazie dell'aiuto ma non volevo dire questo. mi rispiego. quando la barra scorre da una parte all'altra la vedo, ma nn la vedo qnd poi si carica realmente, cioè qnd si spoasta lentamente da sinistra verso destra. e all'improvviso nn vedo più qll fase. ma seguendo il procedimento ke mi avete consigliato, non vedo più neanke la prima fase del caricamento. so ke le scritte ke appaiono al suo posto è qll ke fa il pc qnd noi vediamo la barra ma preferivo la barra di carimento. ki mi aiuta?
- steff
- Moderatore Globale

- Messaggi: 40367
- Iscrizione: domenica 18 febbraio 2007, 19:48
- Desktop: LXQt+labwc
- Distribuzione: Arch; Debian; Ubuntu Server
- Sesso: Maschile
- Località: Toscana
- Contatti:
Re: [Boot] avvio strano
Avevo capito che ti si rallenta il caricamento e per vedere dove si inceppa i messaggi sono fondamentali, scusa.
C'erano dei topic che avevano problemi simile, prova con la ricerca tipo: riabilitare splash e simile
C'erano dei topic che avevano problemi simile, prova con la ricerca tipo: riabilitare splash e simile
Hai fatto un backup oggi? Ieri?? Quando???
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
-
emanuele19956
- Prode Principiante
- Messaggi: 219
- Iscrizione: venerdì 26 dicembre 2008, 22:17
- Località: Lanuvio (RM)
Re: [Boot] avvio strano
ok grazie poi ti dico
-
emanuele19956
- Prode Principiante
- Messaggi: 219
- Iscrizione: venerdì 26 dicembre 2008, 22:17
- Località: Lanuvio (RM)
Re: [Boot] avvio strano
allora ho cercato ma niente di particolare... inoltre quiet splash è presente e ora quando il pc si spegne, anche l'arresto è un po' più lento, in quanto la barra si ferma per un qualche intante verso la fine (ma cmq è una cosa da poco). che devo fare? ciò che voglio risolvere è la visualizzazione delle scritte nonostante sia presente nel file sopra nomianto il codice quiet splash. AIUTATEMI!!!
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 5 ospiti