ho l'ultimo ubuntu e vorrei attivare gli effetti grafici, ma quando provo mi dice: "Impossibile abilitare gli effetti desktop".
i "dati" della mia scheda video sono:
18: PCI(AGP) 100.0: 0300 VGA compatible controller (VGA)
[Created at pci.310]
UDI: /org/freedesktop/Hal/devices/pci_1002_5046
Unique ID: VCu0.955TVrR+Yo5
Parent ID: vSkL.mXT7vbpG6dC
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: graphics card
Model: "ATI Rage Fury Pro/Xpert 2000 Pro"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x5046 "Rage 128 PF"
SubVendor: pci 0x1002 "ATI Technologies Inc"
SubDevice: pci 0x0008 "Rage Fury Pro/Xpert 2000 Pro"
Memory Range: 0xe4000000-0xe7ffffff (rw,prefetchable)
I/O Ports: 0x9000-0x9fff (rw)
Memory Range: 0xe9000000-0xe9003fff (rw,non-prefetchable)
Memory Range: 0xe8000000-0xe801ffff (ro,prefetchable,disabled)
IRQ: 10 (no events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v00001002d00005046sv00001002sd00000008bc03sc00i00"
Driver Info #0:
XFree86 v4 Server Module: ati
Driver Info #1:
XFree86 v4 Server Module: ati
3D Support: yes
Color Depths: 16
Extensions: dri
Options:
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #25 (PCI bridge)
come faccio???? ???
[Ati] "Rage Fury Pro/Xpert 2000 Pro" attivazione 3D
Re: [Ati] "Rage Fury Pro/Xpert 2000 Pro" attivazione 3D
hai installato i driver proprietari?
PS: non vorrei gufare, ma avevo quella scheda e non mi pareva fosse tra le supportate perché troppo vecchia... magari sbaglio :-X
PS: non vorrei gufare, ma avevo quella scheda e non mi pareva fosse tra le supportate perché troppo vecchia... magari sbaglio :-X
Notebook Intel i5-7200u, RAM 8GB DDR4, 128GB SSD + 240GB SSD, Intel Graphics, display LED HD 14", Kubuntu 20.04 64bit
Re: [Ati] "Rage Fury Pro/Xpert 2000 Pro" attivazione 3D
ho cercato, ma non ho trovato niente.... :-\
comunque ho installato tutto quello che c'èra nella lista pacchetti...
non so se è tra le supportate....comunque so k è vecchia, ma stò cercando di far andare un PC di "recupero"....
comunque ho installato tutto quello che c'èra nella lista pacchetti...
non so se è tra le supportate....comunque so k è vecchia, ma stò cercando di far andare un PC di "recupero"....
Re: [Ati] "Rage Fury Pro/Xpert 2000 Pro" attivazione 3D
riuscirai sicuramente nel tuo "recupero" (good)
...non mettere compiz nel preventivo però... :-[
...non mettere compiz nel preventivo però... :-[
Notebook Intel i5-7200u, RAM 8GB DDR4, 128GB SSD + 240GB SSD, Intel Graphics, display LED HD 14", Kubuntu 20.04 64bit
Re: [Ati] "Rage Fury Pro/Xpert 2000 Pro" attivazione 3D
spero di riuscirci!!!! è un rottame!!!!
grazie comunque!
non ti preoccupare....
ciao e grazie!
non ti preoccupare....
ciao e grazie!
Chi c’è in linea
Visualizzano questa sezione: Google [Bot] e 4 ospiti
