windows non parte dopo installazione di ubuntu 9.04
windows non parte dopo installazione di ubuntu 9.04
salve a tutti!
ho un problema sul mio pc fisso. ho installato ubuntu sul mio pc desktop nello stesso hd dove si trovava windows per mezzo del programma di partizionamento guidato di ubuntu durante la fase di installazione del sistema..
ora non riesco più ad avviare windows. non mi da errori ma solo un trattino che lampeggia.
come risolvo??
ho un problema sul mio pc fisso. ho installato ubuntu sul mio pc desktop nello stesso hd dove si trovava windows per mezzo del programma di partizionamento guidato di ubuntu durante la fase di installazione del sistema..
ora non riesco più ad avviare windows. non mi da errori ma solo un trattino che lampeggia.
come risolvo??
Re: windows non parte dopo installazione di ubuntu 9.04
Windows c'è ancora? Posta
Codice: Seleziona tutto
sudo fdisk -lRe: windows non parte dopo installazione di ubuntu 9.04
ilmassa@ilmassa-desktop:~$ sudo fdisk -l
Disco /dev/sda: 122.9 GB, 122942324736 byte
255 testine, 63 settori/tracce, 14946 cilindri
Unità = cilindri di 16065 * 512 = 8225280 byte
Identificativo disco: 0xbdcc8967
Dispositivo Boot Start End Blocks Id System
/dev/sda1 * 1 13118 105370303+ 7 HPFS/NTFS
/dev/sda2 13119 14946 14683410 5 Esteso
/dev/sda5 13119 14863 14016681 83 Linux
/dev/sda6 14864 14946 666666 82 Linux swap / Solaris
Disco /dev/sdb: 160.0 GB, 160041885696 byte
255 testine, 63 settori/tracce, 19457 cilindri
Unità = cilindri di 16065 * 512 = 8225280 byte
Identificativo disco: 0x7ff56f36
Dispositivo Boot Start End Blocks Id System
/dev/sdb1 1 19457 156288321 7 HPFS/NTFS
Disco /dev/sdc: 4063 MB, 4063232000 byte
255 testine, 63 settori/tracce, 493 cilindri
Unità = cilindri di 16065 * 512 = 8225280 byte
Identificativo disco: 0x0217934c
Dispositivo Boot Start End Blocks Id System
/dev/sdc1 * 1 494 3967968+ 6 FAT16
La partizione 1 ha diversi elementi finali fisici/logici:
phys=(492, 254, 63) logico=(493, 253, 16)
ILLUMINATEMI : D
grazie dell'aiuto : )
Disco /dev/sda: 122.9 GB, 122942324736 byte
255 testine, 63 settori/tracce, 14946 cilindri
Unità = cilindri di 16065 * 512 = 8225280 byte
Identificativo disco: 0xbdcc8967
Dispositivo Boot Start End Blocks Id System
/dev/sda1 * 1 13118 105370303+ 7 HPFS/NTFS
/dev/sda2 13119 14946 14683410 5 Esteso
/dev/sda5 13119 14863 14016681 83 Linux
/dev/sda6 14864 14946 666666 82 Linux swap / Solaris
Disco /dev/sdb: 160.0 GB, 160041885696 byte
255 testine, 63 settori/tracce, 19457 cilindri
Unità = cilindri di 16065 * 512 = 8225280 byte
Identificativo disco: 0x7ff56f36
Dispositivo Boot Start End Blocks Id System
/dev/sdb1 1 19457 156288321 7 HPFS/NTFS
Disco /dev/sdc: 4063 MB, 4063232000 byte
255 testine, 63 settori/tracce, 493 cilindri
Unità = cilindri di 16065 * 512 = 8225280 byte
Identificativo disco: 0x0217934c
Dispositivo Boot Start End Blocks Id System
/dev/sdc1 * 1 494 3967968+ 6 FAT16
La partizione 1 ha diversi elementi finali fisici/logici:
phys=(492, 254, 63) logico=(493, 253, 16)
ILLUMINATEMI : D
grazie dell'aiuto : )
Re: windows non parte dopo installazione di ubuntu 9.04
Windows c'è ancora.
Mi raccomando usa il tag code per inserire testi lunghi. Premi il simbolo # che trovi sopra le faccine ed incolla il testo nel tag [ code ][ / code ] che appare
[ code ]così[ / code ]
Posta questo ora/dev/sda1 * 1 13118 105370303+ 7 HPFS/NTFS
Codice: Seleziona tutto
cat /boot/grub/menu.lst[ code ]così[ / code ]
Re: windows non parte dopo installazione di ubuntu 9.04
Codice: Seleziona tutto
ilmassa@ilmassa-desktop:~$ cat /boot/grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=0e0cfc60-fac7-4812-844e-5ea31a875ec7 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=0e0cfc60-fac7-4812-844e-5ea31a875ec7
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid 0e0cfc60-fac7-4812-844e-5ea31a875ec7
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=0e0cfc60-fac7-4812-844e-5ea31a875ec7 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid 0e0cfc60-fac7-4812-844e-5ea31a875ec7
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=0e0cfc60-fac7-4812-844e-5ea31a875ec7 ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid 0e0cfc60-fac7-4812-844e-5ea31a875ec7
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Professional
rootnoverify (hd0,0)
savedefault
makeactive
chainloader +1
ora?
grazie ancoraaa
Re: windows non parte dopo installazione di ubuntu 9.04
Sembra a posto, prova ad aggiungere boot alla fine
Per farlo digita
Fai l'aggiunta e salva il file.
Codice: Seleziona tutto
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Professional
rootnoverify (hd0,0)
savedefault
makeactive
chainloader +1
bootCodice: Seleziona tutto
sudo gedit /boot/grub/menu.lst-
^alessio^
- Rampante Reduce

- Messaggi: 5384
- Iscrizione: giovedì 15 maggio 2008, 22:00
- Sesso: Maschile
- Località: como
Re: windows non parte dopo installazione di ubuntu 9.04
ciao,prova a modificare questa parte in questo modo praticamente al posto di rootnoverify ci metti solo root
salva chiudi riavvia e vedi se win parte.
Codice: Seleziona tutto
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Professional
rootnoverify (hd0,0)
savedefault
makeactive
chainloader +1Codice: Seleziona tutto
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Professional
root (hd0,0)
savedefault
makeactive
chainloader +1salva chiudi riavvia e vedi se win parte.
Re: windows non parte dopo installazione di ubuntu 9.04
nada..niente da fare.. cmq credo dipenda dalla 9.04..avevo installato precedentemente kubuntu 9.04 e mi dava lo stesso tipo di problema..
ho provato con la soluzione proposta da alessio ma non parte..mi dice starting con una lignetta che lampeggia ma non parte
c'è un modo per risolvere o mi tocca riformattare ??
grazie a tutti per l'aiuto : )
ho provato con la soluzione proposta da alessio ma non parte..mi dice starting con una lignetta che lampeggia ma non parte
c'è un modo per risolvere o mi tocca riformattare ??
grazie a tutti per l'aiuto : )
Re: windows non parte dopo installazione di ubuntu 9.04
Hai provato anche come ho detto io?
Altrimenti prova a ripristinare il MBR e vedi se XP parte, poi ripristini anche Grub.
Altrimenti prova a ripristinare il MBR e vedi se XP parte, poi ripristini anche Grub.
- flagello82
- Prode Principiante
- Messaggi: 44
- Iscrizione: sabato 14 marzo 2009, 16:34
Re: windows non parte dopo installazione di ubuntu 9.04
se non hai cancellato windows e la partizione è salva:
scarica supergrub dal web http://www.oneopensource.it/29/10/2007/ ... grub-disk/
masterizzi la ISO su cdrom
riavvii il PC da cdrom
e scegli windows nell'impostazione di supergrub
riavvia il PC è hai il grub intatto.
scarica supergrub dal web http://www.oneopensource.it/29/10/2007/ ... grub-disk/
masterizzi la ISO su cdrom
riavvii il PC da cdrom
e scegli windows nell'impostazione di supergrub
riavvia il PC è hai il grub intatto.
Ultima modifica di flagello82 il martedì 28 aprile 2009, 7:59, modificato 1 volta in totale.
Re: windows non parte dopo installazione di ubuntu 9.04
grazie mille : D
provo e posto il risultato : )
provo e posto il risultato : )
- flagello82
- Prode Principiante
- Messaggi: 44
- Iscrizione: sabato 14 marzo 2009, 16:34
Re: windows non parte dopo installazione di ubuntu 9.04
Io ho avuto il tuo stesso problema quando ho installato Intrepid e ho risoldo, ora mi vanno sia XP che ubuntu.
In bocca al lupo. (b2b)
In bocca al lupo. (b2b)
Re: windows non parte dopo installazione di ubuntu 9.04
niente..ho fatto il formattone e ho lasciato ubuntu sull'eee 
cmq grazie a tutti dell'aiuto : )
cmq grazie a tutti dell'aiuto : )
Chi c’è in linea
Visualizzano questa sezione: Bing [Bot] e 12 ospiti
