[Risolto] l'aggiornamento non me lo fà

Riconoscimento, installazione e configurazione delle periferiche.
Avatar utente
Devilazz
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 521
Iscrizione: mercoledì 31 dicembre 2008, 20:52
Desktop: Unity
Distribuzione: Ubuntu 14.04 64 bit
Sesso: Maschile
Località: Fondi-lt

[Risolto] l'aggiornamento non me lo fà

Messaggio da Devilazz »

ragazzi, problema, stamattina come ogni giorno ubuntu mi fà l'aggiornamento, stranamente mi è uscito oggi aggiornamento parziale, procedere? io sono andato avanti e m'è uscito avanzamento di versione in corso, e già un pò mi sono stranito perchè ho la 9.04 comunque a fine dei conti mi ha fatto un sacco di aggiornamenti ma ne è rimasto uno che non mi seleziona, come posso fare? si chiama LINUX RESTRICTED MODULES GENERIC spero possiate aiutarmi
Ultima modifica di Devilazz il mercoledì 6 maggio 2009, 23:23, modificato 1 volta in totale.
Acer aspire 5738ZG con ubuntu 13.10 64 bit plus 12, hdd 750 gb, 4 gb ram ddr3, scheda video ati radeon HD4650 da 1gb ddr3 e processore intel pentium t4400 da 2.2 ghz
Avatar utente
Deino+
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 807
Iscrizione: lunedì 26 maggio 2008, 20:12
Località: Perugia

Re: l'aggiornamento non me lo fà

Messaggio da Deino+ »

Usi update-manager per fare l'aggiornamento?
Avatar utente
Devilazz
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 521
Iscrizione: mercoledì 31 dicembre 2008, 20:52
Desktop: Unity
Distribuzione: Ubuntu 14.04 64 bit
Sesso: Maschile
Località: Fondi-lt

Re: l'aggiornamento non me lo fà

Messaggio da Devilazz »

sistema, amministrazione, gestore aggiornamenti
Acer aspire 5738ZG con ubuntu 13.10 64 bit plus 12, hdd 750 gb, 4 gb ram ddr3, scheda video ati radeon HD4650 da 1gb ddr3 e processore intel pentium t4400 da 2.2 ghz
Avatar utente
Deino+
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 807
Iscrizione: lunedì 26 maggio 2008, 20:12
Località: Perugia

Re: l'aggiornamento non me lo fà

Messaggio da Deino+ »

andrea89 ha scritto: sistema, amministrazione, gestore aggiornamenti
Sarebbe l'interfaccia grafica di update-manager. Prova ad andare in synaptic e vedere quali sono gli aggiornamenti che vede lui. Quel pacchetto comunque non è necessario, se non sbaglio dovrebbe trattarsi di un meta pacchetto che installa l'ultima versione dei linux-restricted-modules-generic. Puoi postare una lista di tutti i pacchetti che hai che contengono linux all'inizio del nome? (linux-image-xxx, linux-source-xxx, linux-headers-xxx e simili)?
Avatar utente
Devilazz
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 521
Iscrizione: mercoledì 31 dicembre 2008, 20:52
Desktop: Unity
Distribuzione: Ubuntu 14.04 64 bit
Sesso: Maschile
Località: Fondi-lt

Re: l'aggiornamento non me lo fà

Messaggio da Devilazz »

come te li posto? puoi darmi una stringa di comando? tipo sudo ecc o simile? non sono molto pratico ancora, è da poco che uso ubuntu
Acer aspire 5738ZG con ubuntu 13.10 64 bit plus 12, hdd 750 gb, 4 gb ram ddr3, scheda video ati radeon HD4650 da 1gb ddr3 e processore intel pentium t4400 da 2.2 ghz
Avatar utente
Devilazz
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 521
Iscrizione: mercoledì 31 dicembre 2008, 20:52
Desktop: Unity
Distribuzione: Ubuntu 14.04 64 bit
Sesso: Maschile
Località: Fondi-lt

Re: l'aggiornamento non me lo fà

Messaggio da Devilazz »

e mi sò accorto adesso che mi è sparito il wifi, mi manca il driver proprietario, prima lo avevo e adesso no, ho fatto sistema, amministrazione, driver hardware e non c'è più, come posso fà?
Acer aspire 5738ZG con ubuntu 13.10 64 bit plus 12, hdd 750 gb, 4 gb ram ddr3, scheda video ati radeon HD4650 da 1gb ddr3 e processore intel pentium t4400 da 2.2 ghz
Avatar utente
Deino+
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 807
Iscrizione: lunedì 26 maggio 2008, 20:12
Località: Perugia

Re: l'aggiornamento non me lo fà

Messaggio da Deino+ »

andrea89 ha scritto: come te li posto? puoi darmi una stringa di comando? tipo sudo ecc o simile? non sono molto pratico ancora, è da poco che uso ubuntu
prova con

Codice: Seleziona tutto

dpkg -l | grep linux-
e posta quello che esce fuori.
andrea89 ha scritto: e mi sò accorto adesso che mi è sparito il wifi, mi manca il driver proprietario, prima lo avevo e adesso no, ho fatto sistema, amministrazione, driver hardware e non c'è più, come posso fà?
Non ho mai utilizzato una scheda wifi, quindi per questo non saprei proprio come aiutarti, sai almeno qual'era il nome del pacchetto contenente il driver proprietario in questione?
Avatar utente
Devilazz
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 521
Iscrizione: mercoledì 31 dicembre 2008, 20:52
Desktop: Unity
Distribuzione: Ubuntu 14.04 64 bit
Sesso: Maschile
Località: Fondi-lt

Re: l'aggiornamento non me lo fà

Messaggio da Devilazz »

andrea@andrea-laptop:~$ dpkg -l | grep linux-
ii  linux-firmware                            1.11                              Firmware for Linux kernel drivers
ii  linux-headers-2.6.28-12                    2.6.28-12.43                      Header files related to Linux kernel version 2.6.28
ii  linux-headers-2.6.28-12-generic            2.6.28-12.43                      Linux kernel headers for version 2.6.28 on x86/x86_
ii  linux-headers-generic                      2.6.28.12.16                      Generic Linux kernel headers
rc  linux-image-2.6.27-7-generic              2.6.27-7.14                        Linux kernel image for version 2.6.27 on x86/x86_64
ii  linux-image-2.6.28-11-generic              2.6.28-11.42                      Linux kernel image for version 2.6.28 on x86/x86_64
ii  linux-image-2.6.28-12-generic              2.6.28-12.43                      Linux kernel image for version 2.6.28 on x86/x86_64
ii  linux-image-generic                        2.6.28.12.16                      Generic Linux kernel image
ii  linux-libc-dev                            2.6.28-12.43                      Linux Kernel Headers for development
rc  linux-restricted-modules-2.6.27-7-generic  2.6.27-7.12                        Non-free Linux kernel modules for version 2.6.27 on
ii  linux-restricted-modules-2.6.28-11-generic 2.6.28-11.15                      Non-free Linux kernel modules for version 2.6.28 on
ii  linux-restricted-modules-common            2.6.28-11.15                      Non-free Linux 2.6.28 modules helper script
ii  linux-restricted-modules-generic          2.6.28.11.15                      Restricted Linux modules for generic kernels
ii  linux-sound-base                          1.0.18.dfsg-1ubuntu8              base package for ALSA and OSS sound systems
andrea@andrea-laptop:~$


non me lo ricordo purtroppo
Acer aspire 5738ZG con ubuntu 13.10 64 bit plus 12, hdd 750 gb, 4 gb ram ddr3, scheda video ati radeon HD4650 da 1gb ddr3 e processore intel pentium t4400 da 2.2 ghz
Avatar utente
Deino+
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 807
Iscrizione: lunedì 26 maggio 2008, 20:12
Località: Perugia

Re: l'aggiornamento non me lo fà

Messaggio da Deino+ »

andrea89 ha scritto: andrea@andrea-laptop:~$ dpkg -l | grep linux-
ii  linux-firmware                             1.11                               Firmware for Linux kernel drivers
ii  linux-headers-2.6.28-12                    2.6.28-12.43                       Header files related to Linux kernel version 2.6.28
ii  linux-headers-2.6.28-12-generic            2.6.28-12.43                       Linux kernel headers for version 2.6.28 on x86/x86_
ii  linux-headers-generic                      2.6.28.12.16                       Generic Linux kernel headers
rc  linux-image-2.6.27-7-generic               2.6.27-7.14                        Linux kernel image for version 2.6.27 on x86/x86_64
ii  linux-image-2.6.28-11-generic              2.6.28-11.42                       Linux kernel image for version 2.6.28 on x86/x86_64
ii  linux-image-2.6.28-12-generic              2.6.28-12.43                       Linux kernel image for version 2.6.28 on x86/x86_64
ii  linux-image-generic                        2.6.28.12.16                       Generic Linux kernel image
ii  linux-libc-dev                             2.6.28-12.43                       Linux Kernel Headers for development
rc  linux-restricted-modules-2.6.27-7-generic  2.6.27-7.12                        Non-free Linux kernel modules for version 2.6.27 on
ii  linux-restricted-modules-2.6.28-11-generic 2.6.28-11.15                       Non-free Linux kernel modules for version 2.6.28 on
ii  linux-restricted-modules-common            2.6.28-11.15                       Non-free Linux 2.6.28 modules helper script
ii  linux-restricted-modules-generic           2.6.28.11.15                       Restricted Linux modules for generic kernels
ii  linux-sound-base                           1.0.18.dfsg-1ubuntu8               base package for ALSA and OSS sound systems
andrea@andrea-laptop:~$


non me lo ricordo purtroppo
come puoi vedere il pacchetto è installato. Prova

Codice: Seleziona tutto

sudo apt-get install -f
e posta il risultato.
Avatar utente
Devilazz
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 521
Iscrizione: mercoledì 31 dicembre 2008, 20:52
Desktop: Unity
Distribuzione: Ubuntu 14.04 64 bit
Sesso: Maschile
Località: Fondi-lt

Re: l'aggiornamento non me lo fà

Messaggio da Devilazz »

andrea@andrea-laptop:~$ sudo apt-get install -f
[sudo] password for andrea:
Lettura della lista dei pacchetti in corso... Fatto
Generazione dell'albero delle dipendenze in corso     
Lettura informazioni sullo stato... Fatto       
0 aggiornati, 0 installati, 0 da rimuovere e 1 non aggiornati.
andrea@andrea-laptop:~$
Acer aspire 5738ZG con ubuntu 13.10 64 bit plus 12, hdd 750 gb, 4 gb ram ddr3, scheda video ati radeon HD4650 da 1gb ddr3 e processore intel pentium t4400 da 2.2 ghz
Avatar utente
Deino+
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 807
Iscrizione: lunedì 26 maggio 2008, 20:12
Località: Perugia

Re: l'aggiornamento non me lo fà

Messaggio da Deino+ »

Ok, ciò significa che il pacchetto non è aggioranabile perché quei moduli non sono ancora disponibili, dovrai attendere qualche giorno forse... prova ad accedere con il kernel vecchio e dimmi se la scheda wifi funziona ancora...
Avatar utente
Devilazz
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 521
Iscrizione: mercoledì 31 dicembre 2008, 20:52
Desktop: Unity
Distribuzione: Ubuntu 14.04 64 bit
Sesso: Maschile
Località: Fondi-lt

Re: l'aggiornamento non me lo fà

Messaggio da Devilazz »

e come faccio ad accedere col vecchio?
Acer aspire 5738ZG con ubuntu 13.10 64 bit plus 12, hdd 750 gb, 4 gb ram ddr3, scheda video ati radeon HD4650 da 1gb ddr3 e processore intel pentium t4400 da 2.2 ghz
Avatar utente
Deino+
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 807
Iscrizione: lunedì 26 maggio 2008, 20:12
Località: Perugia

Re: l'aggiornamento non me lo fà

Messaggio da Deino+ »

posta il menu.lst, vediamo se ce l'hai ancora
Avatar utente
Devilazz
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 521
Iscrizione: mercoledì 31 dicembre 2008, 20:52
Desktop: Unity
Distribuzione: Ubuntu 14.04 64 bit
Sesso: Maschile
Località: Fondi-lt

Re: l'aggiornamento non me lo fà

Messaggio da Devilazz »

andrea@andrea-laptop:~$ lst
Il programma "lst" non è attualmente installato.  È possibile installarlo digitando:
sudo apt-get install lustre-utils
bash: lst: comando non trovato
andrea@andrea-laptop:~$

lo faccio?
Acer aspire 5738ZG con ubuntu 13.10 64 bit plus 12, hdd 750 gb, 4 gb ram ddr3, scheda video ati radeon HD4650 da 1gb ddr3 e processore intel pentium t4400 da 2.2 ghz
Avatar utente
Guiodic
Accecante Asceta
Accecante Asceta
Messaggi: 28474
Iscrizione: martedì 24 aprile 2007, 15:28
Località: Roma
Contatti:

Re: l'aggiornamento non me lo fà

Messaggio da Guiodic »

Sì è un problema dei repository. NOn hanno ancora caricato il pacchetto restricted-modules del nuovo kernel. Ma tu hai i proposed attivati?
Avatar utente
Deino+
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 807
Iscrizione: lunedì 26 maggio 2008, 20:12
Località: Perugia

Re: l'aggiornamento non me lo fà

Messaggio da Deino+ »

Codice: Seleziona tutto

cat /boot/grub/menu.lst
e posta il risultato
Avatar utente
Devilazz
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 521
Iscrizione: mercoledì 31 dicembre 2008, 20:52
Desktop: Unity
Distribuzione: Ubuntu 14.04 64 bit
Sesso: Maschile
Località: Fondi-lt

Re: l'aggiornamento non me lo fà

Messaggio da Devilazz »

andrea@andrea-laptop:~$ cat /boot/grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=2b1e41ea-cc86-40e6-912e-ab63b39f5c51 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=2b1e41ea-cc86-40e6-912e-ab63b39f5c51

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Ubuntu 9.04, kernel 2.6.28-12-generic
uuid 2b1e41ea-cc86-40e6-912e-ab63b39f5c51
kernel /boot/vmlinuz-2.6.28-12-generic root=UUID=2b1e41ea-cc86-40e6-912e-ab63b39f5c51 ro quiet splash
initrd /boot/initrd.img-2.6.28-12-generic
quiet

title Ubuntu 9.04, kernel 2.6.28-12-generic (recovery mode)
uuid 2b1e41ea-cc86-40e6-912e-ab63b39f5c51
kernel /boot/vmlinuz-2.6.28-12-generic root=UUID=2b1e41ea-cc86-40e6-912e-ab63b39f5c51 ro  single
initrd /boot/initrd.img-2.6.28-12-generic

title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid 2b1e41ea-cc86-40e6-912e-ab63b39f5c51
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=2b1e41ea-cc86-40e6-912e-ab63b39f5c51 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet

title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid 2b1e41ea-cc86-40e6-912e-ab63b39f5c51
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=2b1e41ea-cc86-40e6-912e-ab63b39f5c51 ro  single
initrd /boot/initrd.img-2.6.28-11-generic

title Ubuntu 9.04, memtest86+
uuid 2b1e41ea-cc86-40e6-912e-ab63b39f5c51
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST
andrea@andrea-laptop:~$
Acer aspire 5738ZG con ubuntu 13.10 64 bit plus 12, hdd 750 gb, 4 gb ram ddr3, scheda video ati radeon HD4650 da 1gb ddr3 e processore intel pentium t4400 da 2.2 ghz
Avatar utente
Deino+
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 807
Iscrizione: lunedì 26 maggio 2008, 20:12
Località: Perugia

Re: l'aggiornamento non me lo fà

Messaggio da Deino+ »

Ok, imposta default a 2, e prova se il wifi funziona
Avatar utente
Devilazz
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 521
Iscrizione: mercoledì 31 dicembre 2008, 20:52
Desktop: Unity
Distribuzione: Ubuntu 14.04 64 bit
Sesso: Maschile
Località: Fondi-lt

Re: l'aggiornamento non me lo fà

Messaggio da Devilazz »

non ho capito cosa devo fare e nemmeno come, puoi essere più chiaro per favore?
Acer aspire 5738ZG con ubuntu 13.10 64 bit plus 12, hdd 750 gb, 4 gb ram ddr3, scheda video ati radeon HD4650 da 1gb ddr3 e processore intel pentium t4400 da 2.2 ghz
Avatar utente
Deino+
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 807
Iscrizione: lunedì 26 maggio 2008, 20:12
Località: Perugia

Re: l'aggiornamento non me lo fà

Messaggio da Deino+ »

Fai le modifiche che ti ho indicato e prova a riavviare. Ti comparirà un menù con cinque voci, la terza evidenziata. Premi invio, aspetta che il boot venga completato e prova il wifi:

Codice: Seleziona tutto

andrea@andrea-laptop:~$ cat /boot/grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
[color=red]default		2[/color]

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout		3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
[color=red]hiddenmenu[/color]

# Pretty colours
[color=red]color cyan/blue white/blue[/color]

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title		Windows 95/98/NT/2000
# root		(hd0,0)
# makeactive
# chainloader	+1
#
# title		Linux
# root		(hd0,1)
# kernel	/vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=2b1e41ea-cc86-40e6-912e-ab63b39f5c51 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=2b1e41ea-cc86-40e6-912e-ab63b39f5c51

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title		Ubuntu 9.04, kernel 2.6.28-12-generic
uuid		2b1e41ea-cc86-40e6-912e-ab63b39f5c51
kernel		/boot/vmlinuz-2.6.28-12-generic root=UUID=2b1e41ea-cc86-40e6-912e-ab63b39f5c51 ro quiet splash 
initrd		/boot/initrd.img-2.6.28-12-generic
quiet

title		Ubuntu 9.04, kernel 2.6.28-12-generic (recovery mode)
uuid		2b1e41ea-cc86-40e6-912e-ab63b39f5c51
kernel		/boot/vmlinuz-2.6.28-12-generic root=UUID=2b1e41ea-cc86-40e6-912e-ab63b39f5c51 ro  single
initrd		/boot/initrd.img-2.6.28-12-generic

title		Ubuntu 9.04, kernel 2.6.28-11-generic
uuid		2b1e41ea-cc86-40e6-912e-ab63b39f5c51
kernel		/boot/vmlinuz-2.6.28-11-generic root=UUID=2b1e41ea-cc86-40e6-912e-ab63b39f5c51 ro quiet splash 
initrd		/boot/initrd.img-2.6.28-11-generic
quiet

title		Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid		2b1e41ea-cc86-40e6-912e-ab63b39f5c51
kernel		/boot/vmlinuz-2.6.28-11-generic root=UUID=2b1e41ea-cc86-40e6-912e-ab63b39f5c51 ro  single
initrd		/boot/initrd.img-2.6.28-11-generic

title		Ubuntu 9.04, memtest86+
uuid		2b1e41ea-cc86-40e6-912e-ab63b39f5c51
kernel		/boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST
andrea@andrea-laptop:~$ 

Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: Bing [Bot], tropie e 6 ospiti