Ubuntu-Audio

Riconoscimento, installazione e configurazione delle periferiche.
Avatar utente
Starless
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 2020
Iscrizione: domenica 10 giugno 2007, 11:45
Località: Martina Franca (TA)

Re: Ubuntu-Audio

Messaggio da Starless »

non capisco cosa devo fare
Dai il comando:

Codice: Seleziona tutto

alsamixer
Ti appare il mixer.
In alto a sinistra ci sono delle voci.

paoloci vuole sapere cosa c'è scritto alle voci:

card
chip
Avatar utente
Vetto
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 447
Iscrizione: sabato 4 aprile 2009, 17:35

Re: Ubuntu-Audio

Messaggio da Vetto »

ok  

card hda intel
chip realtek alc883
viev [plyback] capture ati
item master [ dbgain=0.00
spero queste
Avatar utente
MartinuxP
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 329
Iscrizione: domenica 17 giugno 2007, 13:42
Desktop: Ubuntu 2D
Distribuzione: Ubuntu 12-04, 64bit
Località: Vercelli, VC

Re: Ubuntu-Audio

Messaggio da MartinuxP »

Forse l'ideale e' che allargi la finestra del terminale e ci mandi uno screenshot.
Per quanto riguarda il comando speakertest si puo' usare cosi':
prima dai aplay -L che ti elenca i device PCM (occhio che la L e' maiuscola).
ci posti il risultato e cerchiamo di capire come lanciare speaker-test
Avatar utente
Vetto
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 447
Iscrizione: sabato 4 aprile 2009, 17:35

Re: Ubuntu-Audio

Messaggio da Vetto »

To run a command as administrator (user "root"), use "sudo ".
See "man sudo_root" for details.

ubuntu@ubuntu:~$ aplay -L
front:CARD=Intel,DEV=0
    HDA Intel, ALC883 Analog
    Front speakers
surround40:CARD=Intel,DEV=0
    HDA Intel, ALC883 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
    HDA Intel, ALC883 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
    HDA Intel, ALC883 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
    HDA Intel, ALC883 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
    HDA Intel, ALC883 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
    HDA Intel, ALC883 Digital
    IEC958 (S/PDIF) Digital Audio Output
null
    Discard all samples (playback) or generate zero samples (capture)
ubuntu@ubuntu:~$
paoloci
Rampante Reduce
Rampante Reduce
Messaggi: 7507
Iscrizione: mercoledì 28 maggio 2008, 12:08

Re: Ubuntu-Audio

Messaggio da paoloci »

vetto

card hda intel                      GIUSTA
chip realtek alc883                Giusta
viev [plyback] capture ati        c'è scritto capture all
item master [ dbgain=0.00    Deve essere almeno dbgain=3

hai gli interruttori a 0

manda se puoi tutto alsamixer
Avatar utente
MartinuxP
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 329
Iscrizione: domenica 17 giugno 2007, 13:42
Desktop: Ubuntu 2D
Distribuzione: Ubuntu 12-04, 64bit
Località: Vercelli, VC

Re: Ubuntu-Audio

Messaggio da MartinuxP »

speaker-test -Dplug:front -c2
che fa?
Avatar utente
Vetto
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 447
Iscrizione: sabato 4 aprile 2009, 17:35

Re: Ubuntu-Audio

Messaggio da Vetto »

alsamixer

mi da dolo quelle quatro voci che ho scritto
poi sotto ci sono i valori del mixer disegnati ed i controlli sono tutti al massimo
Avatar utente
Starless
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 2020
Iscrizione: domenica 10 giugno 2007, 11:45
Località: Martina Franca (TA)

Re: Ubuntu-Audio

Messaggio da Starless »

alsamixer

mi da dolo quelle quatro voci che ho scritto
poi sotto ci sono i valori del mixer disegnati ed i controlli sono tutti al massimo
Fai uno screenshot e postalo sul forum.
Avatar utente
Vetto
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 447
Iscrizione: sabato 4 aprile 2009, 17:35

Re: Ubuntu-Audio

Messaggio da Vetto »

ho lanciato il comando speaker-test
speaker-test 1.0.18

Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 192 to 2097152
Period size range from 64 to 699051
Using max buffer size 2097152
Periods = 4
was set period_size = 524288
was set buffer_size = 2097152
0 - Front Left
Time per period = 10,940517
0 - Front Left
Time per period = 10,940274
0 - Front Left
Time per period = 10,940529
0 - Front Left
Time per period = 10,940402
0 - Front Left
Time per period = 10,940567
0 - Front Left
Time per period = 10,940376
0 - Front Left
Time per period = 10,940401
0 - Front Left
Time per period = 10,940426
0 - Front Left
Time per period = 10,940370
0 - Front Left
Time per period = 10,940197
0 - Front Left
Time per period = 10,940715
0 - Front Left
Time per period = 10,940408
0 - Front Left
Time per period = 10,940535
0 - Front Left
Time per period = 10,940382
0 - Front Left
Time per period = 10,940282
0 - Front Left
Time per period = 10,940498
0 - Front Left
Time per period = 10,940574
0 - Front Left
Time per period = 10,940179
0 - Front Left
Time per period = 10,941117
0 - Front Left
Time per period = 10,939621
0 - Front Left
Time per period = 10,940628
0 - Front Left
Time per period = 10,940481
0 - Front Left
Time per period = 10,940153
0 - Front Left
Time per period = 10,941297
0 - Front Left
Time per period = 10,949758
0 - Front Left
Time per period = 10,940490
 econtinua ancore....che faccio lo lascio continuare.....?



_________________________________________________________________

mentre il comando Dplug:front -c2
ubuntu@ubuntu:~$ Dplug:front -c2
bash: Dplug:front: command not found
ubuntu@ubuntu:~$
Avatar utente
Starless
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 2020
Iscrizione: domenica 10 giugno 2007, 11:45
Località: Martina Franca (TA)

Re: Ubuntu-Audio

Messaggio da Starless »

econtinua ancore....che faccio lo lascio continuare.....?
NO. Per fermarlo premi Ctrl-c
Una volta lanciato il comando speaker-test ed il comando CORRETTO che ti ho scritto di seguito dovresti sentire dei fruisci provenienti dalle casse (magari!!!).
mentre il comando Dplug:front -c2
Il comando è sbagliato. Quello giusto è:

Codice: Seleziona tutto

speaker-test -Dplug:front -c2
Curiosità:

VETTO hai provato con delle cuffie??
Ultima modifica di Starless il mercoledì 13 maggio 2009, 13:22, modificato 1 volta in totale.
Avatar utente
Vetto
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 447
Iscrizione: sabato 4 aprile 2009, 17:35

Re: Ubuntu-Audio

Messaggio da Vetto »

Sorri Starlees
Allegati
Screenshot.png
Screenshot.png
Avatar utente
Vetto
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 447
Iscrizione: sabato 4 aprile 2009, 17:35

Re: Ubuntu-Audio

Messaggio da Vetto »

To run a command as administrator (user "root"), use "sudo ".
See "man sudo_root" for details.

ubuntu@ubuntu:~$ speaker-test -Dplug:front -c2

speaker-test 1.0.18

Playback device is plug:front
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy

no al momento sono sprovvisto di cuffie ma rimedio subbito e ti faro sapere appena possibile
Avatar utente
Starless
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 2020
Iscrizione: domenica 10 giugno 2007, 11:45
Località: Martina Franca (TA)

Re: Ubuntu-Audio

Messaggio da Starless »

Ragazzi avete visto lo screenshot??

A me sembra che sia tutto OK anche se l'errore:

Codice: Seleziona tutto

Playback open error: -16,Device or resource busy
desta dei sospetti.

Io propongo di provare ad installare i driver ufficiali della realtek.
dj_def
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 3212
Iscrizione: martedì 7 novembre 2006, 3:04

Re: Ubuntu-Audio

Messaggio da dj_def »

io come ultima prova (non mi ricordo se è già stata fatta) proporrei la disinstallazione di pulseaudio
paoloci
Rampante Reduce
Rampante Reduce
Messaggi: 7507
Iscrizione: mercoledì 28 maggio 2008, 12:08

Re: Ubuntu-Audio

Messaggio da paoloci »

sospetto anche quel dbgain a 0 in alsamixer
paoloci
Rampante Reduce
Rampante Reduce
Messaggi: 7507
Iscrizione: mercoledì 28 maggio 2008, 12:08

Re: Ubuntu-Audio

Messaggio da paoloci »

vetto puoi fare

aplay -L

continua ad esserci qualche cosa di storto
Avatar utente
Vetto
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 447
Iscrizione: sabato 4 aprile 2009, 17:35

Re: Ubuntu-Audio

Messaggio da Vetto »

allora mi dite voi quando uscire dal cd live e fare qualche prova
Avatar utente
Vetto
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 447
Iscrizione: sabato 4 aprile 2009, 17:35

Re: Ubuntu-Audio

Messaggio da Vetto »

aplay -L lo faccio terminare prima, e poi vi porto il tutto..'
Avatar utente
Vetto
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 447
Iscrizione: sabato 4 aprile 2009, 17:35

Re: Ubuntu-Audio

Messaggio da Vetto »

ma vi ricordo che sono ancora su cd live..!
Avatar utente
MartinuxP
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 329
Iscrizione: domenica 17 giugno 2007, 13:42
Desktop: Ubuntu 2D
Distribuzione: Ubuntu 12-04, 64bit
Località: Vercelli, VC

Re: Ubuntu-Audio

Messaggio da MartinuxP »

Prova:
speaker-test -c2 -Dplug:default
anche con questo non senti nulla?
Come hai visto nelle schermate di alsamixer che hai postato prima ci sono gli switch/interruttori per abilitare le varie funzioni.
Allo stesso modo li puoi visualizzare nel mixer di gnome, ti basta selezionare il dispositivo dal menù a tedina "HDA Intel (Alsa mixer)", poi vai in preferenze e in "seleziona tracce da visualizzare" selezioni... tutto! :D
Al che ti esce la linguetta "interruttori" e ci mandi gli screen degli interruttori che hai attivato. (teoricamente dovrebbero essere tutti senza il segnetto).
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 4 ospiti