Ubuntu-Audio
Re: Ubuntu-Audio
io non ho capito a che serve la lista degli irq presa da windows... per vedere se su ubuntu usa gli stessi?
Re: Ubuntu-Audio
volete che lo facci dal cd live, o dal sistema ubuntu normalmente.......?
Vetto guarda sul terminale facendo dmesg
Vetto fai un piacere, guarda cosa dice
cat /proc/interrupts
[/quote]
Vetto guarda sul terminale facendo dmesg
Vetto fai un piacere, guarda cosa dice
cat /proc/interrupts
[/quote]
Re: Ubuntu-Audio
dj_def, gli irq sono presi dal BIOS- sappiamo che PCI possono condividere gli stessi IRQ, ma esistono dei casi in cui si creano dei conflitti.
Windows dice di non avere problemi con scheda audio e video sullo stesso IRQ, alsa-base non so, infatti adesso chiediamo a Linux che interrupts ha assegnato.
E' un fatto che appena vetto ha scollegato la scheda video alsa non è stata più capace di caricare i moduli, è un controsenso, mah
e poi, bus PCI e scheda video hanno lo stesso indirizzo di memoria.
Windows dice di non avere problemi con scheda audio e video sullo stesso IRQ, alsa-base non so, infatti adesso chiediamo a Linux che interrupts ha assegnato.
E' un fatto che appena vetto ha scollegato la scheda video alsa non è stata più capace di caricare i moduli, è un controsenso, mah
e poi, bus PCI e scheda video hanno lo stesso indirizzo di memoria.
Re: Ubuntu-Audio
Vetto, si, prova dal cd live
Re: Ubuntu-Audio
facendo dmesg e questa la lista ma solo molto piu lunga preceduta solo da
ubuntu@ubuntu:~$
ubuntu@ubuntu:~$
ubuntu@ubuntu:~$
ubuntu@ubuntu:~$ [ 1.289164] HugeTLB registered 4 MB page size, pre-allocated 0 pages
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.290588] VFS: Disk quotas dquot_6.5.1
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.290649] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$ [ 1.291278] fuse init (API version 7.10)
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$ [ 1.291365] msgmni has been set to 1698
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.291567] alg: No test for stdrng (krng)
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$ [ 1.291583] io scheduler noop registered
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.291585] io scheduler anticipatory registered
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.291587] io scheduler deadline registered
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.291600] io scheduler cfq registered (default)
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$ [ 1.291695] pci 0000:01:00.0: Boot video device
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.295557] pcieport-driver 0000:00:01.0: setting latency timer to 64
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.295590] pcieport-driver 0000:00:01.0: found MSI capability
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.295615] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.295625] pci_express 0000:00:01.0:pcie00: allocate port service
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.295687] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.295697] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.295844] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$ [ 1.295847] ACPI: Power Button (FF) [PWRF]
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$ [ 1.295900] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$ [ 1.295909] ACPI: Power Button (CM) [PWRB]
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$ [ 1.296288] processor ACPI_CPU:00: registered as cooling_device0
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.296292] ACPI: Processor [CPU1] (supports 8 throttling states)
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$
____________________________________________________________________________________________________________________
facendo cat /proc/interrupts
To run a command as administrator (user "root"), use "sudo ".
See "man sudo_root" for details.
ubuntu@ubuntu:~$ cat /proc/interrupts
CPU0 CPU1
0: 127 0 IO-APIC-edge timer
1: 631 0 IO-APIC-edge i8042
4: 2 0 IO-APIC-edge
6: 5 0 IO-APIC-edge floppy
7: 0 0 IO-APIC-edge parport0
8: 1 0 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 65178 0 IO-APIC-edge i8042
14: 6562 0 IO-APIC-edge ata_piix
15: 0 0 IO-APIC-edge ata_piix
16: 67316 0 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel, radeon@pci:0000:01:00.0
18: 0 0 IO-APIC-fasteoi uhci_hcd:usb4, cx88[0], cx88[0]
19: 352 0 IO-APIC-fasteoi ata_piix, uhci_hcd:usb3
21: 0 0 IO-APIC-fasteoi eth0
23: 25817 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2
NMI: 0 0 Non-maskable interrupts
LOC: 54433 70254 Local timer interrupts
RES: 4196 4785 Rescheduling interrupts
CAL: 96 104 Function call interrupts
TLB: 923 863 TLB shootdowns
SPU: 0 0 Spurious interrupts
ERR: 0
MIS: 0
ubuntu@ubuntu:~$
ubuntu@ubuntu:~$
ubuntu@ubuntu:~$
ubuntu@ubuntu:~$
ubuntu@ubuntu:~$ [ 1.289164] HugeTLB registered 4 MB page size, pre-allocated 0 pages
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.290588] VFS: Disk quotas dquot_6.5.1
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.290649] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$ [ 1.291278] fuse init (API version 7.10)
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$ [ 1.291365] msgmni has been set to 1698
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.291567] alg: No test for stdrng (krng)
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$ [ 1.291583] io scheduler noop registered
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.291585] io scheduler anticipatory registered
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.291587] io scheduler deadline registered
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.291600] io scheduler cfq registered (default)
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$ [ 1.291695] pci 0000:01:00.0: Boot video device
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.295557] pcieport-driver 0000:00:01.0: setting latency timer to 64
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.295590] pcieport-driver 0000:00:01.0: found MSI capability
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.295615] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.295625] pci_express 0000:00:01.0:pcie00: allocate port service
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.295687] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.295697] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.295844] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$ [ 1.295847] ACPI: Power Button (FF) [PWRF]
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$ [ 1.295900] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$ [ 1.295909] ACPI: Power Button (CM) [PWRB]
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$ [ 1.296288] processor ACPI_CPU:00: registered as cooling_device0
bash: [: missing `]'
ubuntu@ubuntu:~$ [ 1.296292] ACPI: Processor [CPU1] (supports 8 throttling states)
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$
____________________________________________________________________________________________________________________
facendo cat /proc/interrupts
To run a command as administrator (user "root"), use "sudo ".
See "man sudo_root" for details.
ubuntu@ubuntu:~$ cat /proc/interrupts
CPU0 CPU1
0: 127 0 IO-APIC-edge timer
1: 631 0 IO-APIC-edge i8042
4: 2 0 IO-APIC-edge
6: 5 0 IO-APIC-edge floppy
7: 0 0 IO-APIC-edge parport0
8: 1 0 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 65178 0 IO-APIC-edge i8042
14: 6562 0 IO-APIC-edge ata_piix
15: 0 0 IO-APIC-edge ata_piix
16: 67316 0 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel, radeon@pci:0000:01:00.0
18: 0 0 IO-APIC-fasteoi uhci_hcd:usb4, cx88[0], cx88[0]
19: 352 0 IO-APIC-fasteoi ata_piix, uhci_hcd:usb3
21: 0 0 IO-APIC-fasteoi eth0
23: 25817 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2
NMI: 0 0 Non-maskable interrupts
LOC: 54433 70254 Local timer interrupts
RES: 4196 4785 Rescheduling interrupts
CAL: 96 104 Function call interrupts
TLB: 923 863 TLB shootdowns
SPU: 0 0 Spurious interrupts
ERR: 0
MIS: 0
ubuntu@ubuntu:~$
Re: Ubuntu-Audio
ragazzi, a quanto pare ha assegnato USB controller scheda audio e scheda video sullo stesso interrupt 16
Così la prima volta alsa ha messo dentro il modulo snd-usb che non c'entrava niente, la seconda, senza scheda video, non è partito proprio, la terza, senza webcamera usb, ci ha preso giusto ma non funziona niente dal CD live.
Che si fa?
Gli si fa provare a cambiare interrupts da BIOS ? mica facile
irqpolling ? (magari diventa una foca monaca)
Idee ?
Così la prima volta alsa ha messo dentro il modulo snd-usb che non c'entrava niente, la seconda, senza scheda video, non è partito proprio, la terza, senza webcamera usb, ci ha preso giusto ma non funziona niente dal CD live.
Che si fa?
Gli si fa provare a cambiare interrupts da BIOS ? mica facile
irqpolling ? (magari diventa una foca monaca)
Idee ?
Re: Ubuntu-Audio
io gli farei staccare la webcam tanto per cominciare, poi da bios proverei con l'assegnazione manuale
Re: Ubuntu-Audio
la webcam l'ha già staccata
Dici da BIOS ? non conosci una soluzione meno difficoltosa ?
Dici da BIOS ? non conosci una soluzione meno difficoltosa ?
Re: Ubuntu-Audio
da linux non ho mai cambiato IRQ, senza studiarmi come funziona non saprei proprio come fare
Re: Ubuntu-Audio
aspettiamo, sentiamo un po' anche gli altri
Re: Ubuntu-Audio
si e vero la web camera l' ho staccata da un bel po..........!
Re: Ubuntu-Audio
vetto, così per informazione, che BIOS hai ?
Re: Ubuntu-Audio
bella domanda, .. 0 come risposta, paoloci so mome entrare nel bios, ma non so che bios abbia il mio PCpaoloci ha scritto: vetto, così per informazione, che BIOS hai ?
mi puoi dire come potrei saperlo.....? Grzie
- MartinuxP
- Scoppiettante Seguace

- Messaggi: 329
- Iscrizione: domenica 17 giugno 2007, 13:42
- Desktop: Ubuntu 2D
- Distribuzione: Ubuntu 12-04, 64bit
- Località: Vercelli, VC
Re: Ubuntu-Audio
Farei notare che in windows gli irq sono uguali e funziona tutto...
Perché non dovrebbe con linux?
Ma secondo me il problema rimane altrove, non esiste che gli fa vedere i canali nel mixer se la scheda non funziona.
Hai provato a spostare il jack delle casse/cuffie?
Perché non dovrebbe con linux?
Ma secondo me il problema rimane altrove, non esiste che gli fa vedere i canali nel mixer se la scheda non funziona.
Hai provato a spostare il jack delle casse/cuffie?
Re: Ubuntu-Audio
si questa e una prova che ho fatto di mia inziativa ma senza risultato,MartinuxP ha scritto: Hai provato a spostare il jack delle casse/cuffie?
- MartinuxP
- Scoppiettante Seguace

- Messaggi: 329
- Iscrizione: domenica 17 giugno 2007, 13:42
- Desktop: Ubuntu 2D
- Distribuzione: Ubuntu 12-04, 64bit
- Località: Vercelli, VC
Re: Ubuntu-Audio
magari non serve a niente ma potresti provare a farla mentre il comando
che dovrebbe fregarsene delle impostazioni della scheda audio e dei volumi.
Codice: Seleziona tutto
speaker-test -Dplug:front -c2Re: Ubuntu-Audio
Buon giorno a tutti...Ragazzi.
ti so solo dire, e spero che basta.
nella parte superiore del BIOS cè scritto
CMOS SETUP UTILIT COPYRHT (C) 1985-2004 AMERICAN MAGATRENDS,INS
NELLA PARTE INFERIORE
v02.58 (C) COPYRIGHT 1958-2004 AMERICAN MAGATRENDS,INS
paoloci ha scritto: vetto, così per informazione, che BIOS hai ?
ti so solo dire, e spero che basta.
nella parte superiore del BIOS cè scritto
CMOS SETUP UTILIT COPYRHT (C) 1985-2004 AMERICAN MAGATRENDS,INS
NELLA PARTE INFERIORE
v02.58 (C) COPYRIGHT 1958-2004 AMERICAN MAGATRENDS,INS
Re: Ubuntu-Audio
grazie vetto
Re: Ubuntu-Audio
vetto, se hai tempo, vai nel BIOS, e controlla su Advanced ---Plug And Play O/S
se è configurato sul NO
se è configurato sul NO
Re: Ubuntu-Audio
nel mio bios
Advanced ---Plug And Play O/S non l' ho trovato
ho trovato Advanced ---bios features, e li di audio credo che non c' era nulla mentre,
Advanced ---chip set features
c' era Audio controller Enable
Advanced ---Plug And Play O/S non l' ho trovato
ho trovato Advanced ---bios features, e li di audio credo che non c' era nulla mentre,
Advanced ---chip set features
c' era Audio controller Enable
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 7 ospiti

