Sospensione hard disk - SmartMonTools
- citizen70043399
- Entusiasta Emergente

- Messaggi: 1010
- Iscrizione: sabato 10 gennaio 2009, 19:21
Sospensione hard disk - SmartMonTools
Ho due hard disk, uno con ubuntu e uno come disco dati.
Le temperature del disco dati sono salite fino a 50 gradi centigradi!!!
Anche il disco del sistema... 48°C...
Serve a qualcosa dal punto di vista del calore, smontare l'hd dei dati?
Se sì, come si può fare per renderla una cosa automatica? Per esempio dopo 5 minuti di inutilizzo si smonta...
Oppure è possibile interrompergli in automatico l'alimentazione e riattivarla quando serve?
Le temperature del disco dati sono salite fino a 50 gradi centigradi!!!
Anche il disco del sistema... 48°C...
Serve a qualcosa dal punto di vista del calore, smontare l'hd dei dati?
Se sì, come si può fare per renderla una cosa automatica? Per esempio dopo 5 minuti di inutilizzo si smonta...
Oppure è possibile interrompergli in automatico l'alimentazione e riattivarla quando serve?
Ultima modifica di citizen70043399 il venerdì 22 maggio 2009, 19:48, modificato 1 volta in totale.
Re: Sospensione hard disk
Non è proprio la soluzione ottimale, visto che far partire un disco da fermo comporta un impegno maggiore dei motori che muovono i piattelli del disco stesso e, alla lunga, questo può determinare un'usura maggiore dei motori stessi. Prova ad installare smartmontools e tieni monitorata la situazione dei tuoi dischi.
"Chi c**a sott' 'a neve, pure si ffa 'a bbuca e poi 'a copre, quanno 'a neve se scioje, 'a mm***a vie' sempre fori" T. Milian
- citizen70043399
- Entusiasta Emergente

- Messaggi: 1010
- Iscrizione: sabato 10 gennaio 2009, 19:21
Re: Sospensione hard disk
Il risultato di smartctl:
Codice: Seleziona tutto
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint P80 series
Device Model: SAMSUNG SP0822N
Serial Number: S06QJ1EL504275
Firmware Version: WA100-34
User Capacity: 80,060,424,192 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 1
Local Time is: Thu May 21 20:30:36 2009 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (1980) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 33) minutes.
SMART Attributes Data Structure revision number: 17
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 252 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 080 060 011 Pre-fail Always - 3000
4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 4327
5 Reallocated_Sector_Ct 0x0033 252 252 011 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 252 252 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 252 252 015 Pre-fail Offline - 0
9 Power_On_Half_Minutes 0x0032 099 099 000 Old_age Always - 15h+33m
10 Spin_Retry_Count 0x0033 252 252 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 252 252 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 2338
190 Airflow_Temperature_Cel 0x0022 106 100 000 Old_age Always - 49
194 Temperature_Celsius 0x0022 106 097 000 Old_age Always - 49
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 099 099 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 199 199 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 252 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 252 100 000 Old_age Always - 0
Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
SMART Error Log Version: 1
ATA Error Count: 11 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 11 occurred at disk power-on lifetime: 1378 hours (57 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 a8 8e ec 07 e0 Error:
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
Error 10 occurred at disk power-on lifetime: 1378 hours (57 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 b0 86 ec 07 e0 Error:
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
Error 9 occurred at disk power-on lifetime: 1378 hours (57 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 b8 7e ec 07 e0 Error:
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
Error 8 occurred at disk power-on lifetime: 1378 hours (57 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 c0 76 ec 07 e0 Error:
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
Error 7 occurred at disk power-on lifetime: 1378 hours (57 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 c8 6e ec 07 e0 Error:
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision number = 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
SMART Selective self-test log data structure revision number 0
Warning: ATA Specification requires selective self-test log data structure revision number = 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 90000 Not_testing
5 604800 4 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Re: Sospensione hard disk
La valutazione dei risultati di smartmontools non si basa sul dato immediato, ma deve essere monitorato nel tempo. Quando avrai una quantità di dati adeguata potrai effettuare una valutazione.
"Chi c**a sott' 'a neve, pure si ffa 'a bbuca e poi 'a copre, quanno 'a neve se scioje, 'a mm***a vie' sempre fori" T. Milian
- citizen70043399
- Entusiasta Emergente

- Messaggi: 1010
- Iscrizione: sabato 10 gennaio 2009, 19:21
Re: Sospensione hard disk
Ok, ma cosa sono tutti questi ?
Error 10 occurred at disk power-on lifetime: 1378 hours (57 days + 10 hours)
Error 10 occurred at disk power-on lifetime: 1378 hours (57 days + 10 hours)
Re: Sospensione hard disk
Un disco può generare degli errori. Ad esempio, quando si cerca di scrivere e la testina parte da uno stato di idle e la scrittura non si completa nel tempo canonico. Questo è normale. La valutazione da fare è quante volte questi errori si generano in un periodo di tempo perchè, se la frequenza degli errori è troppo alta, c'è un problema del disco.
"Chi c**a sott' 'a neve, pure si ffa 'a bbuca e poi 'a copre, quanno 'a neve se scioje, 'a mm***a vie' sempre fori" T. Milian
- citizen70043399
- Entusiasta Emergente

- Messaggi: 1010
- Iscrizione: sabato 10 gennaio 2009, 19:21
Re: Sospensione hard disk
Oggi mi è arrivata questa email:
sdb1 è il disco ntfs dei documenti
sdb1 è il disco ntfs dei documenti
Codice: Seleziona tutto
This email was generated by the smartd daemon running on:
host name: pc
DNS domain: [Unknown]
NIS domain: (none)
The following warning/error was logged by the smartd daemon:
Device: /dev/sdb1, 1 Currently unreadable (pending) sectors
For details see host's SYSLOG (default: /var/log/syslog).
You can also use the smartctl utility for further investigation.
No additional email messages about this problem will be sent.
Re: Sospensione hard disk - SmartMonTools
Controlla nel file di log indicato qual è l'errore
"Chi c**a sott' 'a neve, pure si ffa 'a bbuca e poi 'a copre, quanno 'a neve se scioje, 'a mm***a vie' sempre fori" T. Milian
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 6 ospiti
