Sospensione hard disk - SmartMonTools

Riconoscimento, installazione e configurazione delle periferiche.
Avatar utente
citizen70043399
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1010
Iscrizione: sabato 10 gennaio 2009, 19:21

Sospensione hard disk - SmartMonTools

Messaggio da citizen70043399 »

Ho due hard disk, uno con ubuntu e uno come disco dati.
Le temperature del disco dati sono salite fino a 50 gradi centigradi!!!
Anche il disco del sistema... 48°C...

Serve a qualcosa dal punto di vista del calore, smontare l'hd dei dati?
Se sì, come si può fare per renderla una cosa automatica? Per esempio dopo 5 minuti di inutilizzo si smonta...

Oppure è possibile interrompergli in automatico l'alimentazione e riattivarla quando serve?
Ultima modifica di citizen70043399 il venerdì 22 maggio 2009, 19:48, modificato 1 volta in totale.
Avatar utente
gianmpu
Rampante Reduce
Rampante Reduce
Messaggi: 7721
Iscrizione: giovedì 15 novembre 2007, 17:11

Re: Sospensione hard disk

Messaggio da gianmpu »

Non è proprio la soluzione ottimale, visto che far partire un disco da fermo comporta un impegno maggiore dei motori che muovono i piattelli del disco stesso e, alla lunga, questo può determinare un'usura maggiore dei motori stessi. Prova ad installare smartmontools e tieni monitorata la situazione dei tuoi dischi.
"Chi c**a sott' 'a neve, pure si ffa 'a bbuca e poi 'a copre, quanno 'a neve se scioje, 'a mm***a vie' sempre fori" T. Milian
Avatar utente
citizen70043399
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1010
Iscrizione: sabato 10 gennaio 2009, 19:21

Re: Sospensione hard disk

Messaggio da citizen70043399 »

Il risultato di smartctl:

Codice: Seleziona tutto

smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint P80 series
Device Model:     SAMSUNG SP0822N
Serial Number:    S06QJ1EL504275
Firmware Version: WA100-34
User Capacity:    80,060,424,192 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 1
Local Time is:    Thu May 21 20:30:36 2009 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 (1980) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  33) minutes.

SMART Attributes Data Structure revision number: 17
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   252   100   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0007   080   060   011    Pre-fail  Always       -       3000
  4 Start_Stop_Count        0x0032   095   095   000    Old_age   Always       -       4327
  5 Reallocated_Sector_Ct   0x0033   252   252   011    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   252   252   051    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0025   252   252   015    Pre-fail  Offline      -       0
  9 Power_On_Half_Minutes   0x0032   099   099   000    Old_age   Always       -       15h+33m
 10 Spin_Retry_Count        0x0033   252   252   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0012   252   252   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   097   097   000    Old_age   Always       -       2338
190 Airflow_Temperature_Cel 0x0022   106   100   000    Old_age   Always       -       49
194 Temperature_Celsius     0x0022   106   097   000    Old_age   Always       -       49
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   099   099   000    Old_age   Always       -       1
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   199   199   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x000a   252   100   000    Old_age   Always       -       0
201 Soft_Read_Error_Rate    0x000a   252   100   000    Old_age   Always       -       0

Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
SMART Error Log Version: 1
ATA Error Count: 11 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 11 occurred at disk power-on lifetime: 1378 hours (57 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 a8 8e ec 07 e0  Error: 

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------

Error 10 occurred at disk power-on lifetime: 1378 hours (57 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 b0 86 ec 07 e0  Error: 

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------

Error 9 occurred at disk power-on lifetime: 1378 hours (57 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 b8 7e ec 07 e0  Error: 

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------

Error 8 occurred at disk power-on lifetime: 1378 hours (57 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 c0 76 ec 07 e0  Error: 

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------

Error 7 occurred at disk power-on lifetime: 1378 hours (57 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 c8 6e ec 07 e0  Error: 

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------

SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision number = 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
SMART Selective self-test log data structure revision number 0
Warning: ATA Specification requires selective self-test log data structure revision number = 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0    90000  Not_testing
    5   604800        4  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Avatar utente
gianmpu
Rampante Reduce
Rampante Reduce
Messaggi: 7721
Iscrizione: giovedì 15 novembre 2007, 17:11

Re: Sospensione hard disk

Messaggio da gianmpu »

La valutazione dei risultati di smartmontools non si basa sul dato immediato, ma deve essere monitorato nel tempo. Quando avrai una quantità di dati adeguata potrai effettuare una valutazione.
"Chi c**a sott' 'a neve, pure si ffa 'a bbuca e poi 'a copre, quanno 'a neve se scioje, 'a mm***a vie' sempre fori" T. Milian
Avatar utente
citizen70043399
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1010
Iscrizione: sabato 10 gennaio 2009, 19:21

Re: Sospensione hard disk

Messaggio da citizen70043399 »

Ok,  ma cosa sono tutti questi ?

Error 10 occurred at disk power-on lifetime: 1378 hours (57 days + 10 hours)
Avatar utente
gianmpu
Rampante Reduce
Rampante Reduce
Messaggi: 7721
Iscrizione: giovedì 15 novembre 2007, 17:11

Re: Sospensione hard disk

Messaggio da gianmpu »

Un disco può generare degli errori. Ad esempio, quando si cerca di scrivere e la testina parte da uno stato di idle e la scrittura non si completa nel tempo canonico. Questo è normale. La valutazione da fare è quante volte questi errori si generano in un periodo di tempo perchè, se la frequenza degli errori è troppo alta, c'è un problema del disco.
"Chi c**a sott' 'a neve, pure si ffa 'a bbuca e poi 'a copre, quanno 'a neve se scioje, 'a mm***a vie' sempre fori" T. Milian
Avatar utente
citizen70043399
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1010
Iscrizione: sabato 10 gennaio 2009, 19:21

Re: Sospensione hard disk

Messaggio da citizen70043399 »

Oggi mi è arrivata questa email:
sdb1 è il disco ntfs dei documenti

Codice: Seleziona tutto

This email was generated by the smartd daemon running on:

  host name: pc
 DNS domain: [Unknown]
 NIS domain: (none)

The following warning/error was logged by the smartd daemon:

Device: /dev/sdb1, 1 Currently unreadable (pending) sectors

For details see host's SYSLOG (default: /var/log/syslog).

You can also use the smartctl utility for further investigation.
No additional email messages about this problem will be sent.
Avatar utente
gianmpu
Rampante Reduce
Rampante Reduce
Messaggi: 7721
Iscrizione: giovedì 15 novembre 2007, 17:11

Re: Sospensione hard disk - SmartMonTools

Messaggio da gianmpu »

Controlla nel file di log indicato qual è l'errore
"Chi c**a sott' 'a neve, pure si ffa 'a bbuca e poi 'a copre, quanno 'a neve se scioje, 'a mm***a vie' sempre fori" T. Milian
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 5 ospiti