Usb non funzionano più

Riconoscimento, installazione e configurazione delle periferiche.
edino
Prode Principiante
Messaggi: 247
Iscrizione: domenica 2 settembre 2007, 20:19

Usb non funzionano più

Messaggio da edino »

Ciao dopo un riavvio di sitema senza smontare un lettore mp4 che stava caricando della musica (dimenticato)  :(
non mi funzionano più le porte usb non caricano più gli HD esterni le chiavette di memoria le leggono ma non mi fanno mettere dati o toglierli.
Sapreste darmi indicazioni di cosa può essere successo?
Vi Ringrazio Buona Serata

                                                  edino ;)
Avatar utente
c.realkiller
Rampante Reduce
Rampante Reduce
Messaggi: 5166
Iscrizione: mercoledì 7 gennaio 2009, 0:24
Località: Fossano
Contatti:

Re: Usb non funzionano più

Messaggio da c.realkiller »

Codice: Seleziona tutto

lsusb 
cosa vedi?
strade...? dove andiamo noi non ci servono... strade!
Skype: dino.tartaro
facebook: http://www.facebook.com/dino.tartaro
edino
Prode Principiante
Messaggi: 247
Iscrizione: domenica 2 settembre 2007, 20:19

Re: Usb non funzionano più

Messaggio da edino »

Mi da questo

Codice: Seleziona tutto

desktop:~$ lsusb 
Bus 001 Device 002: ID 0ace:1215 ZyDAS WLA-54L WiFi
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Avatar utente
c.realkiller
Rampante Reduce
Rampante Reduce
Messaggi: 5166
Iscrizione: mercoledì 7 gennaio 2009, 0:24
Località: Fossano
Contatti:

Re: Usb non funzionano più

Messaggio da c.realkiller »

edino ha scritto: Mi da questo

Codice: Seleziona tutto

desktop:~$ lsusb 
Bus 001 Device 002: ID 0ace:1215 ZyDAS WLA-54L WiFi
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
per me le porte sono a posto, la pena wi-fi è vista e il lettore è visto, magari non è un problema di porte, ma di moduli che non si caricano.
posta

Codice: Seleziona tutto

dmesg | grep -i usb
strade...? dove andiamo noi non ci servono... strade!
Skype: dino.tartaro
facebook: http://www.facebook.com/dino.tartaro
edino
Prode Principiante
Messaggi: 247
Iscrizione: domenica 2 settembre 2007, 20:19

Re: Usb non funzionano più

Messaggio da edino »

Penso che hai ragione  ;) effetivamente adesso mi carica le pennette ma le cartelle sono con la X rossa e mi dice che i file sono di sola lettura a volte non carica affatto e continua ad andarmi in crash
mi diventano le finestre nere e non si muove + nulla  :( ti posto: dmesg | grep -i usb

Codice: Seleziona tutto

-desktop:~$ dmesg | grep -i usb
[    0.529235] usbcore: registered new interface driver usbfs
[    0.529251] usbcore: registered new interface driver hub
[    0.529271] usbcore: registered new device driver usb
[    4.568475] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.568582] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[    4.568608] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[    4.580017] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[    4.580098] usb usb1: configuration #1 chosen from 1 choice
[    4.580122] hub 1-0:1.0: USB hub found
[    4.580249] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.580314] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[    4.640050] usb usb2: configuration #1 chosen from 1 choice
[    4.640071] hub 2-0:1.0: USB hub found
[    4.640212] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[    4.700052] usb usb3: configuration #1 chosen from 1 choice
[    4.700072] hub 3-0:1.0: USB hub found
[    4.700211] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[    4.760048] usb usb4: configuration #1 chosen from 1 choice
[    4.760068] hub 4-0:1.0: USB hub found
[    4.760214] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[    4.820048] usb usb5: configuration #1 chosen from 1 choice
[    4.820068] hub 5-0:1.0: USB hub found
[    4.820205] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[    4.880055] usb usb6: configuration #1 chosen from 1 choice
[    4.880076] hub 6-0:1.0: USB hub found
[    4.880171] uhci_hcd: USB Universal Host Controller Interface driver
[    4.904037] usb 1-1: new high speed USB device using ehci_hcd and address 2
[   20.018020] usb 1-1: device descriptor read/64, error -110
[   35.232023] usb 1-1: device descriptor read/64, error -110
[   35.448022] usb 1-1: new high speed USB device using ehci_hcd and address 3
[   50.560020] usb 1-1: device descriptor read/64, error -110
[   65.776018] usb 1-1: device descriptor read/64, error -110
[   65.992018] usb 1-1: new high speed USB device using ehci_hcd and address 4
[   71.012045] usb 1-1: device descriptor read/8, error -110
[   76.132102] usb 1-1: device descriptor read/8, error -110
[   76.348017] usb 1-1: new high speed USB device using ehci_hcd and address 5
[   81.368051] usb 1-1: device descriptor read/8, error -110
[   86.488111] usb 1-1: device descriptor read/8, error -110
[   86.592022] hub 1-0:1.0: unable to enumerate USB device on port 1
[   86.716019] usb 1-2: new high speed USB device using ehci_hcd and address 6
[   86.848871] usb 1-2: configuration #1 chosen from 1 choice
[   87.180020] usb 1-2: reset high speed USB device using ehci_hcd and address 6
[   87.351681] usbcore: registered new interface driver zd1211rw
[   87.448032] usb 2-1: new full speed USB device using ohci_hcd and address 2
[  102.584019] usb 2-1: device descriptor read/64, error -110
[  117.824018] usb 2-1: device descriptor read/64, error -110
[  118.064014] usb 2-1: new full speed USB device using ohci_hcd and address 3
[  133.200015] usb 2-1: device descriptor read/64, error -110
[  148.440017] usb 2-1: device descriptor read/64, error -110
[  148.680015] usb 2-1: new full speed USB device using ohci_hcd and address 4
[  153.701041] usb 2-1: device descriptor read/8, error -110
[  158.821041] usb 2-1: device descriptor read/8, error -110
[  159.060014] usb 2-1: new full speed USB device using ohci_hcd and address 5
[  164.080042] usb 2-1: device descriptor read/8, error -110
[  169.200046] usb 2-1: device descriptor read/8, error -110
[  169.304035] hub 2-0:1.0: unable to enumerate USB device on port 1
[  169.568094] usb 4-1: new full speed USB device using ohci_hcd and address 2
[  169.743066] usb 4-1: configuration #1 chosen from 1 choice
[  170.102254] Initializing USB Mass Storage driver...
[  170.103658] scsi6 : SCSI emulation for USB Mass Storage devices
[  170.103964] usbcore: registered new interface driver usb-storage
[  170.103969] USB Mass Storage support registered.
[  170.113677] usb-storage: device found at 2
[  170.113680] usb-storage: waiting for device to settle before scanning
[  174.391838] usb 1-2: firmware: requesting zd1211/zd1211b_ub
[  174.516625] usb 1-2: firmware: requesting zd1211/zd1211b_uphr
[  175.113159] usb-storage: device scan complete
[  175.119155] scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[  175.125148] scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[  175.131151] scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[  175.137147] scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[ 6225.184030] usb 1-1: new high speed USB device using ehci_hcd and address 8
[ 6225.381945] usb 1-1: configuration #1 chosen from 1 choice
[ 6225.421284] scsi7 : SCSI emulation for USB Mass Storage devices
[ 6225.423842] usb-storage: device found at 8
[ 6225.423848] usb-storage: waiting for device to settle before scanning
[ 6230.420350] usb-storage: device scan complete
[ 6281.028067] usb 1-9: new high speed USB device using ehci_hcd and address 9
[ 6281.208434] usb 1-9: configuration #1 chosen from 1 choice
[ 6281.237661] scsi8 : SCSI emulation for USB Mass Storage devices
[ 6281.256674] usb-storage: device found at 9
[ 6281.256680] usb-storage: waiting for device to settle before scanning
[ 6286.256254] usb-storage: device scan complete
[ 6286.256936] scsi 8:0:0:0: Direct-Access     USB 2.0  SD MMC Reader         PQ: 0 ANSI: 0 CCS
[ 6452.166620] usb 1-9: USB disconnect, address 9
[ 6572.964502] usb 1-1: USB disconnect, address 8
[ 6585.424033] usb 1-9: new high speed USB device using ehci_hcd and address 10
[ 6585.579342] usb 1-9: configuration #1 chosen from 1 choice
[ 6585.581226] scsi9 : SCSI emulation for USB Mass Storage devices
[ 6585.581674] usb-storage: device found at 10
[ 6585.581678] usb-storage: waiting for device to settle before scanning
[ 6590.580433] usb-storage: device scan complete
[ 6729.344999] usb 1-9: USB disconnect, address 10
[ 6737.352093] usb 1-9: new high speed USB device using ehci_hcd and address 11
[ 6737.553643] usb 1-9: configuration #1 chosen from 1 choice
[ 6737.605646] scsi10 : SCSI emulation for USB Mass Storage devices
[ 6737.605897] usb-storage: device found at 11
[ 6737.605902] usb-storage: waiting for device to settle before scanning
[ 6742.604255] usb-storage: device scan complete
Ti Ringrazio x la cortese attenzione  (b2b)
Buona Serata

                                    edino
Avatar utente
c.realkiller
Rampante Reduce
Rampante Reduce
Messaggi: 5166
Iscrizione: mercoledì 7 gennaio 2009, 0:24
Località: Fossano
Contatti:

Re: Usb non funzionano più

Messaggio da c.realkiller »

per le x rossa basta che cambi i permessi alle cartelle con chmod +x e gli dai i permessi che vuoi se vuoi dagli tutti i permessi a tutto 777 quindi chmod +x 777 altrimenti ti rimando al wiki /AmministrazioneSistema/PermessiFile?highlight=(permessi)
nel file da te allegato cè un errore -110 ma non so cosa sia.
strade...? dove andiamo noi non ci servono... strade!
Skype: dino.tartaro
facebook: http://www.facebook.com/dino.tartaro
edino
Prode Principiante
Messaggi: 247
Iscrizione: domenica 2 settembre 2007, 20:19

Re: Usb non funzionano più

Messaggio da edino »

Ok! X rosse sistemate  (good) ti ringrazio ora sto cercando x sistemare il resto spulciando un pò
Buona Giornata

                                          edino  ;)
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: Gas59 e 4 ospiti