[Wireless] Modem interno HSDPA globetrotter su vaio

Riconoscimento, installazione e configurazione delle periferiche.
Avatar utente
lenzetta
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 264
Iscrizione: domenica 9 marzo 2008, 23:54
Desktop: gnome
Distribuzione: Ubuntu 10.04.4 LTS i686

[Wireless] Modem interno HSDPA globetrotter su vaio

Messaggio da lenzetta »

Dopo varie ricerche nel forum ed in internet durate alcuni giorni oggi mi sono accorto di una conversazione tra shaved e un utente, dove shaved gli chiedeva di postare dmsge e lsusb, purtroppo l'utente  non ha risposto.
Io credo di avere lo stesso problema, non mi rileva il modem che dovrebbe essere un globetrotter.
Per chi volesse aiutarmi aggiungo alcune informazioni:
vaio vgn;  ubuntu 9.04; chipset Mobile 4 (credo); kernel 2.6.28.11 generic.
Grazie a tutti   
Ultima modifica di lenzetta il mercoledì 27 maggio 2009, 17:44, modificato 1 volta in totale.
Avatar utente
apisty1
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 613
Iscrizione: martedì 24 febbraio 2009, 18:16

Re: [Wireless] Modem interno HSDPA globetrotter su vaio

Messaggio da apisty1 »

Ciao, posta l'output di

Codice: Seleziona tutto

lspci
e
dmesg
LinuxQualityHelp
Linux registered user: #472786
Machine: Asus A3500N powered by Ubuntu 8.04
Avatar utente
lenzetta
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 264
Iscrizione: domenica 9 marzo 2008, 23:54
Desktop: gnome
Distribuzione: Ubuntu 10.04.4 LTS i686

Re: [Wireless] Modem interno HSDPA globetrotter su vaio

Messaggio da lenzetta »

sato5@sato5-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
02:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
0b:04.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
0b:04.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
0b:04.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
0b:04.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11)
sato5@sato5-laptop:~$

Questo è dmesg, è troppo lungo non credo me lo abbia dato tutto. Grazie
[    0.799746] pci 0000:0b:04.0: setting latency timer to 64
[    0.799752] bus: 00 index 0 io port: [0x00-0xffff]
[    0.799755] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[    0.799759] bus: 02 index 0 io port: [0x6000-0x6fff]
[    0.799763] bus: 02 index 1 mmio: [0x99900000-0x9a9fffff]
[    0.799766] bus: 02 index 2 mmio: [0x94800000-0x957fffff]
[    0.799769] bus: 02 index 3 mmio: [0x0-0x0]
[    0.799772] bus: 03 index 0 io port: [0x5000-0x5fff]
[    0.799776] bus: 03 index 1 mmio: [0x98900000-0x998fffff]
[    0.799779] bus: 03 index 2 mmio: [0x95800000-0x967fffff]
[    0.799782] bus: 03 index 3 mmio: [0x0-0x0]
[    0.799785] bus: 08 index 0 io port: [0x4000-0x4fff]
[    0.799788] bus: 08 index 1 mmio: [0x97900000-0x988fffff]
[    0.799792] bus: 08 index 2 mmio: [0x96800000-0x977fffff]
[    0.799795] bus: 08 index 3 mmio: [0x0-0x0]
[    0.799798] bus: 0b index 0 io port: [0x3000-0x3fff]
[    0.799801] bus: 0b index 1 mmio: [0x92000000-0x940fffff]
[    0.799804] bus: 0b index 2 mmio: [0x90000000-0x91ffffff]
[    0.799807] bus: 0b index 3 io port: [0x00-0xffff]
[    0.799811] bus: 0b index 4 mmio: [0x000000-0xffffffff]
[    0.799814] bus: 0c index 0 io port: [0x3000-0x30ff]
[    0.799817] bus: 0c index 1 io port: [0x3400-0x34ff]
[    0.799820] bus: 0c index 2 mmio: [0x9c000000-0x9fffffff]
[    0.799824] bus: 0c index 3 mmio: [0xa0000000-0xa3ffffff]
[    0.799835] NET: Registered protocol family 2
[    0.812082] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.812421] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.812838] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.813056] TCP: Hash tables configured (established 131072 bind 65536)
[    0.813059] TCP reno registered
[    0.820101] NET: Registered protocol family 1
[    0.820263] checking if image is initramfs... it is
[    1.830245] Freeing initrd memory: 7373k freed
[    1.830304] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    1.830307] Simple Boot Flag at 0x44 set to 0x1
[    1.830553] cpufreq: No nForce2 chipset.
[    1.830751] audit: initializing netlink socket (disabled)
[    1.830780] type=2000 audit(1243448045.828:1): initialized
[    1.842695] highmem bounce pool size: 64 pages
[    1.842703] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.844740] VFS: Disk quotas dquot_6.5.1
[    1.844828] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.845752] fuse init (API version 7.10)
[    1.845886] msgmni has been set to 1699
[    1.846135] alg: No test for stdrng (krng)
[    1.846152] io scheduler noop registered
[    1.846155] io scheduler anticipatory registered
[    1.846158] io scheduler deadline registered
[    1.846179] io scheduler cfq registered (default)
[    1.846194] pci 0000:00:02.0: Boot video device
[    1.886105] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    1.886172] pcieport-driver 0000:00:1c.0: found MSI capability
[    1.886221] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
[    1.886242] pci_express 0000:00:1c.0:pcie00: allocate port service
[    1.886263] pci_express 0000:00:1c.0:pcie02: allocate port service
[    1.886282] pci_express 0000:00:1c.0:pcie03: allocate port service
[    1.886380] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    1.886445] pcieport-driver 0000:00:1c.1: found MSI capability
[    1.886489] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X
[    1.886510] pci_express 0000:00:1c.1:pcie00: allocate port service
[    1.886528] pci_express 0000:00:1c.1:pcie02: allocate port service
[    1.886547] pci_express 0000:00:1c.1:pcie03: allocate port service
[    1.886645] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[    1.886709] pcieport-driver 0000:00:1c.3: found MSI capability
[    1.886753] pcieport-driver 0000:00:1c.3: irq 2301 for MSI/MSI-X
[    1.886774] pci_express 0000:00:1c.3:pcie00: allocate port service
[    1.886797] pci_express 0000:00:1c.3:pcie02: allocate port service
[    1.886815] pci_express 0000:00:1c.3:pcie03: allocate port service
[    1.886927] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.887637] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.888404] ACPI: AC Adapter [AC] (on-line)
[    1.889110] ACPI: Battery Slot [BAT0] (battery absent)
[    1.889220] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.889233] ACPI: Power Button (CM) [PWRB]
[    1.889296] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    1.890049] ACPI: Lid Switch [liD0]
[    1.891310] ACPI: SSDT 7BB6FC98, 0223 (r1  Sony    VAIO 20090109 INTL 20051117)
[    1.892120] ACPI: SSDT 7BB6D618, 05B2 (r1  Sony    VAIO 20090109 INTL 20051117)
[    1.893075] Monitor-Mwait will be used to enter C-1 state
[    1.893080] Monitor-Mwait will be used to enter C-2 state
[    1.893084] Monitor-Mwait will be used to enter C-3 state
[    1.893105] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    1.893141] processor ACPI_CPU:00: registered as cooling_device0
[    1.893147] ACPI: Processor [CPU0] (supports 8 throttling states)
[    1.893876] ACPI: SSDT 7BB6EE18, 01CF (r1  Sony    VAIO 20090109 INTL 20051117)
[    1.894724] ACPI: SSDT 7BB6FF18, 008D (r1  Sony    VAIO 20090109 INTL 20051117)
[    1.895824] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    1.895854] processor ACPI_CPU:01: registered as cooling_device1
[    1.895860] ACPI: Processor [CPU1] (supports 8 throttling states)
[    1.903497] thermal LNXTHERM:01: registered as thermal_zone0
[    1.904883] ACPI: Thermal Zone [ATF0] (62 C)
[    1.904965] isapnp: Scanning for PnP cards...
[    2.258786] isapnp: No Plug & Play device found
[    2.264875] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    2.266394] brd: module loaded
[    2.266858] loop: module loaded
[    2.266954] Fixed MDIO Bus: probed
[    2.266962] PPP generic driver version 2.4.2
[    2.267045] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    2.267090] Driver 'sd' needs updating - please use bus_type methods
[    2.267104] Driver 'sr' needs updating - please use bus_type methods
[    2.267162] ahci 0000:00:1f.2: version 3.0
[    2.267182] ahci 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    2.267235] ahci 0000:00:1f.2: irq 2300 for MSI/MSI-X
[    2.267353] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    2.267359] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems
[    2.267367] ahci 0000:00:1f.2: setting latency timer to 64
[    2.267736] scsi0 : ahci
[    2.267856] scsi1 : ahci
[    2.267948] scsi2 : ahci
[    2.268033] scsi3 : ahci
[    2.268123] scsi4 : ahci
[    2.268204] scsi5 : ahci
[    2.268586] ata1: SATA max UDMA/133 abar m2048@0x9aa25000 port 0x9aa25100 irq 2300
[    2.268592] ata2: SATA max UDMA/133 abar m2048@0x9aa25000 port 0x9aa25180 irq 2300
[    2.268595] ata3: DUMMY
[    2.268597] ata4: DUMMY
[    2.268601] ata5: SATA max UDMA/133 abar m2048@0x9aa25000 port 0x9aa25300 irq 2300
[    2.268606] ata6: SATA max UDMA/133 abar m2048@0x9aa25000 port 0x9aa25380 irq 2300
[    2.588027] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.626188] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[    2.665138] ata1.00: ATA-8: TOSHIBA MK1617GSG, SP002A, max UDMA/100
[    2.665142] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.667843] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[    2.668018] ata1.00: configured for UDMA/100
[    3.004526] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.006504] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[    3.006510] ata2.00: ATAPI: Optiarc  DVD RW AD-7910S, 1.70, max UDMA/100
[    3.008740] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[    3.008783] ata2.00: configured for UDMA/100
[    3.344023] ata5: SATA link down (SStatus 0 SControl 300)
[    3.680022] ata6: SATA link down (SStatus 0 SControl 300)
[    3.696146] scsi 0:0:0:0: Direct-Access    ATA      TOSHIBA MK1617GS SP00 PQ: 0 ANSI: 5
[    3.696289] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[    3.696314] sd 0:0:0:0: [sda] Write Protect is off
[    3.696318] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.696357] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.696446] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[    3.696469] sd 0:0:0:0: [sda] Write Protect is off
[    3.696472] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.696516] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.696521]  sda: sda1 sda2 sda3 sda4
[    3.819992] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.820063] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.821644] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7910S  1.70 PQ: 0 ANSI: 5
[    3.831245] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.831250] Uniform CD-ROM driver Revision: 3.20
[    3.831380] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.831433] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.832504] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.832533] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[    3.832551] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    3.832556] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    3.832639] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    3.836544] ehci_hcd 0000:00:1a.7: debug port 1
[    3.836554] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    3.836572] ehci_hcd 0000:00:1a.7: irq 23, io mem 0x9aa25c00
[    3.852013] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    3.852104] usb usb1: configuration #1 chosen from 1 choice
[    3.852144] hub 1-0:1.0: USB hub found
[    3.852154] hub 1-0:1.0: 6 ports detected
[    3.852314] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    3.852331] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    3.852336] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.852396] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    3.856319] ehci_hcd 0000:00:1d.7: debug port 1
[    3.856329] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    3.856346] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x9aa25800
[    3.872012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.872094] usb usb2: configuration #1 chosen from 1 choice
[    3.872132] hub 2-0:1.0: USB hub found
[    3.872142] hub 2-0:1.0: 6 ports detected
[    3.872280] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.872305] uhci_hcd: USB Universal Host Controller Interface driver
[    3.872333] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.872342] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    3.872347] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    3.872407] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    3.872439] uhci_hcd 0000:00:1a.0: irq 23, io base 0x000070e0
[    3.872548] usb usb3: configuration #1 chosen from 1 choice
[    3.872585] hub 3-0:1.0: USB hub found
[    3.872594] hub 3-0:1.0: 2 ports detected
[    3.872713] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[    3.872722] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    3.872727] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    3.872791] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    3.872822] uhci_hcd 0000:00:1a.1: irq 23, io base 0x000070c0
[    3.872932] usb usb4: configuration #1 chosen from 1 choice
[    3.872970] hub 4-0:1.0: USB hub found
[    3.872979] hub 4-0:1.0: 2 ports detected
[    3.873108] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[    3.873117] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    3.873122] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    3.873184] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    3.873215] uhci_hcd 0000:00:1a.2: irq 23, io base 0x000070a0
[    3.873321] usb usb5: configuration #1 chosen from 1 choice
[    3.873361] hub 5-0:1.0: USB hub found
[    3.873370] hub 5-0:1.0: 2 ports detected
[    3.873488] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    3.873497] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.873502] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.873576] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    3.873607] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00007080
[    3.873712] usb usb6: configuration #1 chosen from 1 choice
[    3.873749] hub 6-0:1.0: USB hub found
[    3.873758] hub 6-0:1.0: 2 ports detected
[    3.873875] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    3.873884] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    3.873889] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.873952] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    3.873982] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00007060
[    3.874087] usb usb7: configuration #1 chosen from 1 choice
[    3.874124] hub 7-0:1.0: USB hub found
[    3.874133] hub 7-0:1.0: 2 ports detected
[    3.874254] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[    3.874263] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    3.874268] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.874328] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    3.874359] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00007040
[    3.874460] usb usb8: configuration #1 chosen from 1 choice
[    3.874500] hub 8-0:1.0: USB hub found
[    3.874508] hub 8-0:1.0: 2 ports detected
[    3.874693] usbcore: registered new interface driver libusual
[    3.874737] usbcore: registered new interface driver usbserial
[    3.874760] USB Serial support registered for generic
[    3.874786] usbcore: registered new interface driver usbserial_generic
[    3.874789] usbserial: USB Serial Driver core
[    3.874857] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    3.878385] i8042.c: Detected active multiplexing controller, rev 1.1.
[    3.881387] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.881395] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    3.881399] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    3.881403] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    3.881407] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    3.884056] mice: PS/2 mouse device common for all mice
[    3.896099] rtc_cmos 00:03: RTC can wake from S4
[    3.896145] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    3.896182] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    3.896268] device-mapper: uevent: version 1.0.3
[    3.896391] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    3.896489] device-mapper: multipath: version 1.0.5 loaded
[    3.896492] device-mapper: multipath round-robin: version 1.0.0 loaded
[    3.896601] EISA: Probing bus 0 at eisa.0
[    3.896613] Cannot allocate resource for EISA slot 2
[    3.896616] Cannot allocate resource for EISA slot 3
[    3.896620] Cannot allocate resource for EISA slot 4
[    3.896623] Cannot allocate resource for EISA slot 5
[    3.896626] Cannot allocate resource for EISA slot 6
[    3.896629] Cannot allocate resource for EISA slot 7
[    3.896637] EISA: Detected 0 cards.
[    3.896800] cpuidle: using governor ladder
[    3.896976] cpuidle: using governor menu
[    3.897739] TCP cubic registered
[    3.897890] NET: Registered protocol family 10
[    3.898540] lo: Disabled Privacy Extensions
[    3.899050] NET: Registered protocol family 17
[    3.899077] Bluetooth: L2CAP ver 2.11
[    3.899080] Bluetooth: L2CAP socket layer initialized
[    3.899084] Bluetooth: SCO (Voice Link) ver 0.6
[    3.899086] Bluetooth: SCO socket layer initialized
[    3.899131] Bluetooth: RFCOMM socket layer initialized
[    3.899139] Bluetooth: RFCOMM TTY layer initialized
[    3.899142] Bluetooth: RFCOMM ver 1.10
[    3.899145] Marking TSC unstable due to TSC halts in idle
[    3.900081] Using IPI No-Shortcut mode
[    3.900177] registered taskstats version 1
[    3.900349]  Magic number: 9:101:242
[    3.900448] rtc_cmos 00:03: setting system clock to 2009-05-27 18:14:08 UTC (1243448048)
[    3.900452] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.900455] EDD information not available.
[    3.900805] Freeing unused kernel memory: 532k freed
[    3.901023] Write protecting the kernel text: 4128k
[    3.901113] Write protecting the kernel read-only data: 1532k
[    3.909960] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    4.164527] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    4.176132] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[    4.176137] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[    4.176261] e1000e 0000:00:19.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    4.176279] e1000e 0000:00:19.0: setting latency timer to 64
[    4.176666] e1000e 0000:00:19.0: irq 2299 for MSI/MSI-X
[    4.267510] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1d:ba:66:cc:82
[    4.267515] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[    4.267575] 0000:00:19.0: eth0: MAC: 6, PHY: 8, PBA No: ffffff-0ff
[    4.295077] ohci1394 0000:0b:04.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    4.295087] ohci1394 0000:0b:04.1: setting latency timer to 64
[    4.343654] usb 1-2: configuration #1 chosen from 1 choice
[    4.347884] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21]  MMIO=[94001000-940017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    4.672199] PM: Starting manual resume from disk
[    4.672204] PM: Resume from partition 8:3
[    4.672206] PM: Checking hibernation image.
[    4.672432] PM: Resume from disk failed.
[    4.718572] kjournald starting.  Commit interval 5 seconds
[    4.718591] EXT3-fs: mounted filesystem with ordered data mode.
[    4.856104] usb 5-2: new full speed USB device using uhci_hcd and address 2
[    5.000097] Clocksource tsc unstable (delta = -316060327 ns)
[    5.022379] usb 5-2: configuration #1 chosen from 1 choice
[    5.672257] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0800460302cff1fa]
[  11.125911] udev: starting version 141
[  11.257020] Bluetooth: Generic Bluetooth USB driver ver 0.3
[  11.257166] usbcore: registered new interface driver btusb
[  11.277233] Linux agpgart interface v0.103
[  11.313578] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[  11.315365] agpgart-intel 0000:00:00.0: detected 65532K stolen memory
[  11.320148] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[  11.416589] cfg80211: Calling CRDA to update world regulatory domain
[  11.433966] sdhci: Secure Digital Host Controller Interface driver
[  11.433971] sdhci: Copyright(c) Pierre Ossman
[  11.563645] input: PC Speaker as /devices/platform/pcspkr/input/input4
[  11.645296] sony-laptop: Sony Programmable IO Control Driver v0.6.
[  11.645328] sony-laptop: detected Type2 model
[  11.646818] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/SNY6001:00/input/input5
[  11.652794] input: Sony Vaio Jogdial as /devices/virtual/input/input6
[  11.664156] sony-laptop: device allocated minor is 57
[  11.665743] sony-laptop: Sony Notebook Control Driver v0.6.
[  11.673289] iTCO_vendor_support: vendor-support=0
[  11.677572] sony-laptop: brightness ignored, must be controlled by ACPI video driver
[  11.787252] Linux video capture interface: v2.00
[  11.805941] acpi device:04: registered as cooling_device2
[  11.806654] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input7
[  11.812203] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[  11.839415] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[  11.839744] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[  11.839761] iTCO_wdt: No card detected
[  11.954014] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[  11.977078] sdhci-pci 0000:0b:04.2: SDHCI controller found [1180:0822] (rev 21)
[  11.977101] sdhci-pci 0000:0b:04.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[  11.978148] sdhci-pci 0000:0b:04.2: Will use DMA mode even though HW doesn't fully claim to support it.
[  11.978156] sdhci-pci 0000:0b:04.2: setting latency timer to 64
[  11.980286] mmc0: SDHCI controller on PCI [0000:0b:04.2] using DMA
[  12.025584] mmc0: Reset 0x1 never completed.
[  12.025584] sdhci: ============== REGISTER DUMP ==============
[  12.025584] sdhci: Sys addr: 0x00000000 | Version:  0x00000400
[  12.025584] sdhci: Blk size: 0x00000000 | Blk cnt:  0x00000000
[  12.025584] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[  12.025584] sdhci: Present:  0x00020000 | Host ctl: 0x00000000
[  12.025584] sdhci: Power:    0x0000000e | Blk gap:  0x00000000
[  12.025584] sdhci: Wake-up:  0x00000000 | Clock:    0x00008007
[  12.025584] sdhci: Timeout:  0x00000000 | Int stat: 0x00000000
[  12.025584] sdhci: Int enab: 0x00000000 | Sig enab: 0x00000000
[  12.025584] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[  12.025584] sdhci: Caps:    0x01c021a1 | Max curr: 0x00000040
[  12.025584] sdhci: ===========================================
[  12.253710] cfg80211: World regulatory domain updated:
[  12.253714] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  12.253718] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  12.253721] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  12.253725] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  12.253728] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  12.253731] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  12.293525] yenta_cardbus 0000:0b:04.0: CardBus bridge found [104d:9047]
[  12.421263] yenta_cardbus 0000:0b:04.0: ISA IRQ mask 0x00b8, PCI irq 20
[  12.421269] yenta_cardbus 0000:0b:04.0: Socket status: 30000006
[  12.421273] pci_bus 0000:0b: Raising subordinate bus# of parent bus (#0b) from #0c to #0f
[  12.421318] yenta_cardbus 0000:0b:04.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[  12.421322] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean.
[  12.421594] yenta_cardbus 0000:0b:04.0: pcmcia: parent PCI bridge Memory window: 0x92000000 - 0x940fffff
[  12.421597] yenta_cardbus 0000:0b:04.0: pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x91ffffff
[  12.469912] uvcvideo: Found UVC 1.00 device (05ca:18b1)
[  12.470666] input: UVC Camera (05ca:18b1) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input8
[  12.471197] usbcore: registered new interface driver uvcvideo
[  12.471201] USB Video Class driver (v0.1.0)
[  12.544231] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input9
[  12.557190] ip_tables: (C) 2000-2006 Netfilter Core Team
[  12.570844] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input10
[  12.885110] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[  12.885115] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[  12.885277] iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  12.885314] iwlagn 0000:02:00.0: setting latency timer to 64
[  12.885451] iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[  12.908773] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
[  12.908849] iwlagn 0000:02:00.0: irq 2298 for MSI/MSI-X
[  12.910278] phy0: Selected rate control algorithm 'iwl-agn-rs'
[  12.976880] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[  12.977139] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[  12.977143] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[  12.977146] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[  13.073672] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[  13.076192] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[  13.076816] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[  13.077661] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[  13.078707] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[  13.260067] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[  13.260196] HDA Intel 0000:00:1b.0: setting latency timer to 64
[  13.294658] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[  13.590952] lp: driver loaded but no devices found
[  13.688348] Adding 3478064k swap on /dev/sda3.  Priority:-1 extents:1 across:3478064k
[  14.238055] EXT3 FS on sda4, internal journal
[  15.536380] type=1505 audit(1243440860.132:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2243
[  15.597439] type=1505 audit(1243440860.196:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2247
[  15.597551] type=1505 audit(1243440860.196:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2247
[  15.597606] type=1505 audit(1243440860.196:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2247
[  15.597660] type=1505 audit(1243440860.196:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2247
[  15.766281] type=1505 audit(1243440860.364:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2252
[  15.766478] type=1505 audit(1243440860.364:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2252
[  15.802168] type=1505 audit(1243440860.400:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2256
[  21.669164] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  21.669171] Bluetooth: BNEP filters: protocol multicast
[  22.002770] Bridge firewalling registered
[  24.402285] ppdev: user-space parallel port driver
[  25.401197] [drm] Initialized drm 1.1.0 20060810
[  25.597992] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  25.598000] pci 0000:00:02.0: setting latency timer to 64
[  25.598438] pci 0000:00:02.0: irq 2297 for MSI/MSI-X
[  25.598561] [drm] Initialized i915 1.6.0 20080730 on minor 0
[  25.675101] [drm:i915_setparam] *ERROR* unknown parameter 4
[  28.416291] e1000e 0000:00:19.0: irq 2299 for MSI/MSI-X
[  28.472104] e1000e 0000:00:19.0: irq 2299 for MSI/MSI-X
[  28.472593] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  28.473705] iwlagn 0000:02:00.0: firmware: requesting iwlwifi-5000-1.ucode
[  28.754762] Registered led device: iwl-phy0:radio
[  28.754789] Registered led device: iwl-phy0:assoc
[  28.754812] Registered led device: iwl-phy0:RX
[  28.754842] Registered led device: iwl-phy0:TX
[  28.769818] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  53.055343] CPU0 attaching NULL sched-domain.
[  53.055350] CPU1 attaching NULL sched-domain.
[  53.064648] CPU0 attaching sched-domain:
[  53.064652]  domain 0: span 0-1 level MC
[  53.064657]  groups: 0 1
[  53.064665] CPU1 attaching sched-domain:
[  53.064668]  domain 0: span 0-1 level MC
[  53.064672]  groups: 1 0
[  53.377466] CPU0 attaching NULL sched-domain.
[  53.377474] CPU1 attaching NULL sched-domain.
[  53.388103] CPU0 attaching sched-domain:
[  53.388109]  domain 0: span 0-1 level MC
[  53.388113]  groups: 0 1
[  53.388123] CPU1 attaching sched-domain:
[  53.388126]  domain 0: span 0-1 level MC
[  53.388129]  groups: 1 0
[  57.464093] wlan0: authenticate with AP 00:1b:11:d2:20:33
[  57.466016] wlan0: authenticated
[  57.466021] wlan0: associate with AP 00:1b:11:d2:20:33
[  57.469201] wlan0: RX AssocResp from 00:1b:11:d2:20:33 (capab=0x431 status=0 aid=1)
[  57.469205] wlan0: associated
[  57.472260] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  67.604555] wlan0: no IPv6 routers present
sato5@sato5-laptop:~$
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: Gas59 e 4 ospiti