[Audio] Nessuno!

Riconoscimento, installazione e configurazione delle periferiche.
Vituz
Prode Principiante
Messaggi: 17
Iscrizione: giovedì 7 maggio 2009, 14:54
Località: Padova

Re: [Audio] Nessuno!

Messaggio da Vituz »

erbasox ha scritto: Posta il risultato di:

Codice: Seleziona tutto

sudo asoundconf list
(b2b)
Please note that you are attempting to run asoundconf as a privileged superuser, which may have unintended consequences.

Names of available sound cards:
ICH5
Avatar utente
erbasox
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1062
Iscrizione: sabato 28 ottobre 2006, 16:24
Desktop: PekWM, Mate
Distribuzione: Ubuntu 20.04 LTS x86_64
Sesso: Maschile
Località: Atene

Re: [Audio] Nessuno!

Messaggio da erbasox »

Dai i seguenti comandi:

Codice: Seleziona tutto

sudo asoundconf set-default-card "ICH5"
sudo aptitude install module-assistant
sudo m-a update
sudo m-a prepare
sudo m-a a-i alsa
sudo apt-get install alsa-utils
riavvia il pc poi dai il seguente comando:

Codice: Seleziona tutto

alsamixer -V all
regola i volumi scorrendo con le freccette con il tasto m attivi i canali

(b2b)
ilmaredinverno
Prode Principiante
Messaggi: 50
Iscrizione: mercoledì 9 aprile 2008, 12:16

Re: [Audio] Nessuno!

Messaggio da ilmaredinverno »

Io ho lo stesso problema  >:( (anche io ho aggiornato ubuntu e non sento una ceppa dalle casse!!!)

Ma se vado in Sistema > Preferenze > Audio

Faccio i test, li sento... e per di più se apro youtube e faccio girare un video e lascio in esecuzione il test l'audio torna, ma quando chiudo... scompare :o

Il test che lasciato in esecuzione mi fa sentire l'audio è Audioconferenza > Acquisizione audio... ecco se lascio girare questo si sente tutto perfettamente... non mi pare però un metodo comodo.
Ultima modifica di ilmaredinverno il domenica 31 maggio 2009, 12:39, modificato 1 volta in totale.
Avatar utente
erbasox
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1062
Iscrizione: sabato 28 ottobre 2006, 16:24
Desktop: PekWM, Mate
Distribuzione: Ubuntu 20.04 LTS x86_64
Sesso: Maschile
Località: Atene

Re: [Audio] Nessuno!

Messaggio da erbasox »

ilmaredinverno ha scritto: Io ho lo stesso problema  >:( (anche io ho aggiornato ubuntu e non sento una ceppa dalle casse!!!)

Ma se vado in Sistema > Preferenze > Audio

Faccio i test, li sento... e per di più se apro youtube e faccio girare un video e lascio in esecuzione il test l'audio torna, ma quando chiudo... scompare :o
Prova a dare questo comando:

Codice: Seleziona tutto

sudo /etc/init.d/alsa-utils reset
Riavvia e vedi se va

(b2b)
Vituz
Prode Principiante
Messaggi: 17
Iscrizione: giovedì 7 maggio 2009, 14:54
Località: Padova

Re: [Audio] Nessuno!

Messaggio da Vituz »

ormai ho reinstallato tutto e va!
Avatar utente
erbasox
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1062
Iscrizione: sabato 28 ottobre 2006, 16:24
Desktop: PekWM, Mate
Distribuzione: Ubuntu 20.04 LTS x86_64
Sesso: Maschile
Località: Atene

Re: [Audio] Nessuno!

Messaggio da erbasox »

Sei stato un po' drastico in quel modo avresti risolto cmq sono felice che hai risolto  (b2b)
Vituz
Prode Principiante
Messaggi: 17
Iscrizione: giovedì 7 maggio 2009, 14:54
Località: Padova

Re: [Audio] Nessuno!

Messaggio da Vituz »

erbasox ha scritto: Sei stato un po' drastico in quel modo avresti risolto cmq sono felice che hai risolto  (b2b)
ma ormai avevo già fatto quando l'ho letto! >:(
Avatar utente
Drummy
Prode Principiante
Messaggi: 39
Iscrizione: domenica 17 maggio 2009, 11:55
Località: Genova

Re: [Audio] Nessuno!

Messaggio da Drummy »

io ho fatto come cè scritto sopra ma non va :'( :'( :'( :'(
"Quando il mio corpo sarà cenere, il mio corpo sarà leggenda"
ilmaredinverno
Prode Principiante
Messaggi: 50
Iscrizione: mercoledì 9 aprile 2008, 12:16

Re: [Audio] Nessuno!

Messaggio da ilmaredinverno »

grazie ma mi è uscita sta roba
* Resetting ALSA...                                                            Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
                                                                        [ OK ]
Avatar utente
erbasox
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1062
Iscrizione: sabato 28 ottobre 2006, 16:24
Desktop: PekWM, Mate
Distribuzione: Ubuntu 20.04 LTS x86_64
Sesso: Maschile
Località: Atene

Re: [Audio] Nessuno!

Messaggio da erbasox »

Drummy ha scritto: io ho fatto come cè scritto sopra ma non va :'( :'( :'( :'(
Drummy cosa hai fatto in particolare e non ti funziona?

ilmaredinverno hai provato il:

Codice: Seleziona tutto

sudo /etc/init.d/alsa-utils reset
e ti esce quello?
ilmaredinverno
Prode Principiante
Messaggi: 50
Iscrizione: mercoledì 9 aprile 2008, 12:16

Re: [Audio] Nessuno!

Messaggio da ilmaredinverno »

erbasox ha scritto:
ilmaredinverno hai provato il:

Codice: Seleziona tutto

sudo /etc/init.d/alsa-utils reset
e ti esce quello?
Esatto :)
ginalfa
Prode Principiante
Messaggi: 9
Iscrizione: martedì 19 maggio 2009, 11:25

Re: [Audio] Nessuno!

Messaggio da ginalfa »

mhhh io credo che il problema sta nel supporto del chip ICH5, visto che il web è pieno di rapporti su bug del kernel o di ALSA riguardanti questo chip.
Ce l'ho anch'io e ci sto impazzendo da mesi senza venirne a capo. >:(
A me il controllo volume master è del tutto ininfluente e posso controllare il volume solo con il cursore PCM di alsamixer.
inoltre l'input del microfono è pure lui latitante con il risultato che skype non può essere usato se non in modalità testo. :'(
Avatar utente
Drummy
Prode Principiante
Messaggi: 39
Iscrizione: domenica 17 maggio 2009, 11:55
Località: Genova

Re: [Audio] Nessuno!

Messaggio da Drummy »

Fatto il procedimento sopra e mi esce questo:

* Resetting ALSA...                                                            Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
                                                                        [ OK ]
drummy@drummy:~$
"Quando il mio corpo sarà cenere, il mio corpo sarà leggenda"
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: Google [Bot] e 12 ospiti