problemi con Wireless USB adapter Alice G-132

Riconoscimento, installazione e configurazione delle periferiche.
zampy
Prode Principiante
Messaggi: 41
Iscrizione: domenica 31 maggio 2009, 20:24

problemi con Wireless USB adapter Alice G-132

Messaggio da zampy »

io ho una penna Wireless USB adapter Alice G-132
con iol comando lsusb il compure la rileva, ma non riesco a usarla per connettermi, potete darmi una mano???
ho cercato in 10000 siti, ma niente
grazie in anticipo!!!
Avatar utente
ethyl
Rampante Reduce
Rampante Reduce
Messaggi: 7766
Iscrizione: venerdì 19 gennaio 2007, 16:31

Re: problemi con Wireless USB adapter Alice G-132

Messaggio da ethyl »

posta

Codice: Seleziona tutto

lsusb
e

Codice: Seleziona tutto

sudo lshw -C network
zampy
Prode Principiante
Messaggi: 41
Iscrizione: domenica 31 maggio 2009, 20:24

Re: problemi con Wireless USB adapter Alice G-132

Messaggio da zampy »

ethyl ha scritto: posta

Codice: Seleziona tutto

lsusb
e

Codice: Seleziona tutto

sudo lshw -C network
dice:
*-network             
      description: Ethernet interface
      product: nForce2 Ethernet Controller
      vendor: nVidia Corporation
      physical id: 4
      bus info: pci@0000:00:04.0
      logical name: eth1
      version: a1
      serial: 40:f0:00:e7:39:00
      capacity: 100MB/s
      width: 32 bits
      clock: 66MHz
      capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
      configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.61 latency=0 link=no maxlatency=20 mingnt=1 module=forcedeth multicast=yes port=MII
  *-network
      description: Ethernet interface
      product: 3C920B-EMB Integrated Fast Ethernet Controller [Tornado]
      vendor: 3Com Corporation
      physical id: 1
      bus info: pci@0000:02:01.0
      logical name: eth0
      version: 40
      serial: 00:26:54:0b:31:67
      size: 100MB/s
      capacity: 100MB/s
      width: 32 bits
      clock: 33MHz
      capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
      configuration: autonegotiation=on broadcast=yes driver=3c59x duplex=full latency=32 link=yes maxlatency=10 mingnt=10 module=3c59x multicast=yes port=MII speed=100MB/s
  *-network DISABLED
      description: Ethernet interface
      physical id: 1
      logical name: pan0
      serial: 56:c9:de:b4:fe:66
      capabilities: ethernet physical
      configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes
Avatar utente
ethyl
Rampante Reduce
Rampante Reduce
Messaggi: 7766
Iscrizione: venerdì 19 gennaio 2007, 16:31

Re: problemi con Wireless USB adapter Alice G-132

Messaggio da ethyl »

e il primo?

Codice: Seleziona tutto

lsusb
naturalmente con la chiavetta inserita ( anche quello che hai già postato )
zampy
Prode Principiante
Messaggi: 41
Iscrizione: domenica 31 maggio 2009, 20:24

Re: problemi con Wireless USB adapter Alice G-132

Messaggio da zampy »

ethyl ha scritto: e il primo?

Codice: Seleziona tutto

lsusb
naturalmente con la chiavetta inserita ( anche quello che hai già postato )
allora, ricapitoliamo
lsusb:

Bus 001 Device 003: ID 04b4:6830 Cypress Semiconductor Corp. CY7C68300A EZ-USB AT2 USB 2.0 to ATA/ATAPI
Bus 001 Device 002: ID 2001:3a03 D-Link Corp. [hex] DWL-G132 (no firmware)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 093a:2468 Pixart Imaging, Inc. Cammaestro 2.5DU/X-EYE/Orite SC-120/ICGear TravelCam/Easy Snap Snake Eye WebCam
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 017: ID f304:05a0 
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


la kiavetta interessata è la Bus 001 Device 002


codice sudo lshw -C network:

*-network             
      description: Ethernet interface
      product: nForce2 Ethernet Controller
      vendor: nVidia Corporation
      physical id: 4
      bus info: pci@0000:00:04.0
      logical name: eth1
      version: a1
      serial: 40:f0:00:e7:39:00
      capacity: 100MB/s
      width: 32 bits
      clock: 66MHz
      capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
      configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.61 latency=0 link=no maxlatency=20 mingnt=1 module=forcedeth multicast=yes port=MII
  *-network
      description: Ethernet interface
      product: 3C920B-EMB Integrated Fast Ethernet Controller [Tornado]
      vendor: 3Com Corporation
      physical id: 1
      bus info: pci@0000:02:01.0
      logical name: eth0
      version: 40
      serial: 00:26:54:0b:31:67
      size: 100MB/s
      capacity: 100MB/s
      width: 32 bits
      clock: 33MHz
      capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
      configuration: autonegotiation=on broadcast=yes driver=3c59x duplex=full latency=32 link=yes maxlatency=10 mingnt=10 module=3c59x multicast=yes port=MII speed=100MB/s
  *-network DISABLED
      description: Ethernet interface
      physical id: 1
      logical name: pan0
      serial: 56:c9:de:b4:fe:66
      capabilities: ethernet physical
      configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes
Avatar utente
ethyl
Rampante Reduce
Rampante Reduce
Messaggi: 7766
Iscrizione: venerdì 19 gennaio 2007, 16:31

Re: problemi con Wireless USB adapter Alice G-132

Messaggio da ethyl »

Bus 001 Device 002: ID 2001:3a03 D-Link Corp. [hex] DWL-G132 (no firmware)
lsusb ti dice no firmware?
comunque puoi seguire questo post
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 8 ospiti