problema bios scheda madre

Riconoscimento, installazione e configurazione delle periferiche.
Avatar utente
matley81
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 601
Iscrizione: martedì 18 settembre 2007, 10:27

problema bios scheda madre

Messaggio da matley81 »

Ciao a tutti dando il comando dmesg mi compare questo:

Codice: Seleziona tutto

bled.
[    0.408999] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[    0.409149] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 *11 14 15)
[    0.409300] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[    0.409449] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.409599] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.409749] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.409899] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.410050] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
[    0.410201] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
[    0.410351] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
[    0.410532] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[    0.410709] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[    0.410886] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.411062] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[    0.411239] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
[    0.411416] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[    0.411594] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[    0.411772] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[    0.411948] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[    0.412137] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[    0.412314] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
[    0.412490] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[    0.412667] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[    0.412844] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[    0.413021] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[    0.413198] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[    0.413374] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.413551] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.413728] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[    0.413905] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
[    0.414014] ACPI: WMI: Mapper loaded
[    0.414061] SCSI subsystem initialized
[    0.414061] libata version 3.00 loaded.
[    0.414061] usbcore: registered new interface driver usbfs
[    0.414061] usbcore: registered new interface driver hub
[    0.414061] usbcore: registered new device driver usb
[    0.414061] PCI: Using ACPI for IRQ routing
[    0.424031] Bluetooth: Core ver 2.13
[    0.424057] NET: Registered protocol family 31
[    0.424057] Bluetooth: HCI device and connection manager initialized
[    0.424057] Bluetooth: HCI socket layer initialized
[    0.424057] NET: Registered protocol family 8
[    0.424057] NET: Registered protocol family 20
[    0.424057] NetLabel: Initializing
[    0.424057] NetLabel:  domain hash size = 128
[    0.424057] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.424057] NetLabel:  unlabeled traffic allowed by default
[    0.424191] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[    0.424194] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.432072] AppArmor: AppArmor Filesystem Enabled
[    0.436026] Switched to high resolution mode on CPU 0
[    0.436035] Switched to high resolution mode on CPU 1
[    0.444310] pnp: PnP ACPI init
[    0.444326] ACPI: bus type pnp registered
[    0.448593] pnp: PnP ACPI: found 15 devices
[    0.448595] ACPI: ACPI bus type pnp unregistered
[    0.448602] system 00:01: ioport range 0x1000-0x107f has been reserved
[    0.448603] system 00:01: ioport range 0x1080-0x10ff has been reserved
[    0.448605] system 00:01: ioport range 0x1400-0x147f has been reserved
[    0.448606] system 00:01: ioport range 0x1480-0x14ff has been reserved
[    0.448608] system 00:01: ioport range 0x1800-0x187f has been reserved
[    0.448609] system 00:01: ioport range 0x1880-0x18ff has been reserved
[    0.448613] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    0.448614] system 00:02: ioport range 0x800-0x87f has been reserved
[    0.448616] system 00:02: ioport range 0x290-0x297 has been reserved
[    0.448621] system 00:0d: iomem range 0xf0000000-0xf3ffffff has been reserved
[    0.448624] system 00:0e: iomem range 0xcca00-0xcffff has been reserved
[    0.448626] system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
[    0.448627] system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
[    0.448629] system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
[    0.448630] system 00:0e: iomem range 0xfefff000-0xfefff0ff has been reserved
[    0.448632] system 00:0e: iomem range 0x7fee0000-0x7fefffff could not be reserved
[    0.448634] system 00:0e: iomem range 0xffff0000-0xffffffff has been reserved
[    0.448635] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[    0.448637] system 00:0e: iomem range 0x100000-0x7fedffff could not be reserved
[    0.448639] system 00:0e: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.448640] system 00:0e: iomem range 0xfee00000-0xfeefffff has been reserved
[    0.448642] system 00:0e: iomem range 0xfefff000-0xfeffffff could not be reserved
[    0.448644] system 00:0e: iomem range 0xfff80000-0xfff80fff has been reserved
[    0.448646] system 00:0e: iomem range 0xfff90000-0xfffbffff has been reserved
[    0.448647] system 00:0e: iomem range 0xfffed000-0xfffeffff has been reserved
[    0.453268] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[    0.453270] pci 0000:00:04.0:   IO window: 0xd000-0xdfff
[    0.453272] pci 0000:00:04.0:   MEM window: 0xf8000000-0xfbffffff
[    0.453274] pci 0000:00:04.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
[    0.453277] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02
[    0.453278] pci 0000:00:0e.0:   IO window: disabled
[    0.453280] pci 0000:00:0e.0:   MEM window: 0xfdf00000-0xfdffffff
[    0.453282] pci 0000:00:0e.0:   PREFETCH window: disabled
[    0.453284] pci 0000:00:16.0: PCI bridge, secondary bus 0000:03
[    0.453286] pci 0000:00:16.0:   IO window: 0xc000-0xcfff
[    0.453288] pci 0000:00:16.0:   MEM window: 0xfde00000-0xfdefffff
[    0.453290] pci 0000:00:16.0:   PREFETCH window: disabled
[    0.453296] pci 0000:00:04.0: setting latency timer to 64
[    0.453299] pci 0000:00:0e.0: setting latency timer to 64
[    0.453303] pci 0000:00:16.0: setting latency timer to 64
[    0.453305] bus: 00 index 0 io port: [0x00-0xffff]
[    0.453306] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[    0.453308] bus: 01 index 0 io port: [0xd000-0xdfff]
[    0.453309] bus: 01 index 1 mmio: [0xf8000000-0xfbffffff]
[    0.453310] bus: 01 index 2 mmio: [0xe0000000-0xefffffff]
[    0.453311] bus: 01 index 3 mmio: [0x0-0x0]
[    0.453312] bus: 02 index 0 mmio: [0x0-0x0]
[    0.453313] bus: 02 index 1 mmio: [0xfdf00000-0xfdffffff]
[    0.453315] bus: 02 index 2 mmio: [0x0-0x0]
[    0.453316] bus: 02 index 3 io port: [0x00-0xffff]
[    0.453317] bus: 02 index 4 mmio: [0x000000-0xffffffffffffffff]
[    0.453318] bus: 03 index 0 io port: [0xc000-0xcfff]
[    0.453319] bus: 03 index 1 mmio: [0xfde00000-0xfdefffff]
[    0.453320] bus: 03 index 2 mmio: [0x0-0x0]
[    0.453321] bus: 03 index 3 mmio: [0x0-0x0]
[    0.453330] NET: Registered protocol family 2
[    0.488355] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.488613] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.489895] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.490301] TCP: Hash tables configured (established 262144 bind 65536)
[    0.490302] TCP reno registered
[    0.500380] NET: Registered protocol family 1
[    0.500463] checking if image is initramfs... it is
[    0.897123] Freeing initrd memory: 7757k freed
[    0.900495] audit: initializing netlink socket (disabled)
[    0.900523] type=2000 audit(1244196733.900:1): initialized
[    0.905901] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.906701] VFS: Disk quotas dquot_6.5.1
[    0.906734] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.907116] fuse init (API version 7.10)
[    0.907165] msgmni has been set to 3971
[    0.907307] alg: No test for stdrng (krng)
[    0.907318] io scheduler noop registered
[    0.907319] io scheduler anticipatory registered
[    0.907320] io scheduler deadline registered
[    0.907347] io scheduler cfq registered (default)
[    0.907356] pci 0000:00:00.0: Enabling HT MSI Mapping
[    0.907381] pci 0000:00:04.0: Enabling HT MSI Mapping
[    0.920788] pci 0000:00:0d.0: Enabling HT MSI Mapping
[    0.920795] pci 0000:00:0d.1: Enabling HT MSI Mapping
[    0.920803] pci 0000:00:0d.2: Enabling HT MSI Mapping
[    0.920809] pci 0000:00:0e.0: Enabling HT MSI Mapping
[    0.920817] pci 0000:00:0e.1: Enabling HT MSI Mapping
[    0.920827] pci 0000:00:10.0: Enabling HT MSI Mapping
[    0.920836] pci 0000:00:11.0: Enabling HT MSI Mapping
[    0.920844] pci 0000:00:16.0: Enabling HT MSI Mapping
[    0.920856] pci 0000:01:00.0: Boot video device
[    0.926357] pcieport-driver 0000:00:04.0: setting latency timer to 64
[    0.926372] pcieport-driver 0000:00:04.0: found MSI capability
[    0.926384] pcieport-driver 0000:00:04.0: irq 2303 for MSI/MSI-X
[    0.926388] pci_express 0000:00:04.0:pcie00: allocate port service
[    0.926396] pci_express 0000:00:04.0:pcie03: allocate port service
[    0.926421] pcieport-driver 0000:00:16.0: setting latency timer to 64
[    0.926443] pcieport-driver 0000:00:16.0: found MSI capability
[    0.926454] pcieport-driver 0000:00:16.0: irq 2302 for MSI/MSI-X
[    0.926459] pci_express 0000:00:16.0:pcie00: allocate port service
[    0.926467] pci_express 0000:00:16.0:pcie03: allocate port service
[    0.926501] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.926506] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.926602] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.926603] ACPI: Power Button (FF) [PWRF]
[    0.926630] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.926631] ACPI: Power Button (CM) [PWRB]
[    0.926669] fan PNP0C0B:00: registered as cooling_device0
[    0.926672] ACPI: Fan [FAN] (on)
[    0.926905] ACPI: processor limited to max C-state 1
[    0.926916] processor ACPI_CPU:00: registered as cooling_device1
[    0.926937] processor ACPI_CPU:01: registered as cooling_device2
[    0.931158] ACPI Warning (nspredef-0858): \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference [20080926]
[    0.931163] ACPI: Expecting a [Reference] package element, found type 0
[    0.931422] thermal LNXTHERM:01: registered as thermal_zone0
[    0.931797] ACPI: Thermal Zone [THRM] (40 C)
[    0.956856] Linux agpgart interface v0.103
[    0.956863] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    0.956947] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.957153] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.957630] brd: module loaded
[    0.957819] loop: module loaded
[    0.957860] Fixed MDIO Bus: probed
[    0.957864] PPP generic driver version 2.4.2
[    0.957899] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.957916] Driver 'sd' needs updating - please use bus_type methods
[    0.957922] Driver 'sr' needs updating - please use bus_type methods
[    0.958004] sata_sil24 0000:03:00.0: version 1.1
[    0.958282] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[    0.958291] sata_sil24 0000:03:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[    0.958349] sata_sil24 0000:03:00.0: setting latency timer to 64
[    0.958554] scsi0 : sata_sil24
[    0.958640] scsi1 : sata_sil24
[    0.958663] ata1: SATA max UDMA/100 host m128@0xfdeff000 port 0xfdef8000 irq 16
[    0.958665] ata2: SATA max UDMA/100 host m128@0xfdeff000 port 0xfdefa000 irq 16
[    3.036228] ata1: SATA link down (SStatus 0 SControl 0)
[    5.116227] ata2: SATA link down (SStatus 0 SControl 0)
[    5.116273] sata_nv 0000:00:0d.0: version 3.5
[    5.116538] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[    5.116545] sata_nv 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    5.116547] sata_nv 0000:00:0d.0: Using SWNCQ mode
[    5.116804] sata_nv 0000:00:0d.0: setting latency timer to 64
[    5.116939] scsi2 : sata_nv
[    5.116988] scsi3 : sata_nv
[    5.117101] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf800 irq 23
[    5.117103] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf808 irq 23
[    5.850604] ata3: SATA link down (SStatus 0 SControl 300)
[    6.728328] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    6.777697] ata4.00: ATA-7: MAXTOR STM3160215AS, 3.AAD, max UDMA/133
[    6.777699] ata4.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    6.844339] ata4.00: configured for UDMA/133
[    6.844358] isa bounce pool size: 16 pages
[    6.844417] scsi 3:0:0:0: Direct-Access     ATA      MAXTOR STM316021 3.AA PQ: 0 ANSI: 5
[    6.844477] sd 3:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[    6.844487] sd 3:0:0:0: [sda] Write Protect is off
[    6.844489] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.844511] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.844561] sd 3:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[    6.844569] sd 3:0:0:0: [sda] Write Protect is off
[    6.844570] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.844585] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.844587]  sda: sda1 sda2 < sda5 sda6 >
[    6.911974] sd 3:0:0:0: [sda] Attached SCSI disk
[    6.912006] sd 3:0:0:0: Attached scsi generic sg0 type 0
[    6.912278] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[    6.912285] sata_nv 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[    6.912287] sata_nv 0000:00:0d.1: Using SWNCQ mode
[    6.912559] sata_nv 0000:00:0d.1: setting latency timer to 64
[    6.912681] scsi4 : sata_nv
[    6.912728] scsi5 : sata_nv
[    6.912840] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf300 irq 22
[    6.912842] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf308 irq 22
[    7.646603] ata5: SATA link down (SStatus 0 SControl 300)
[    8.524327] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    8.532437] ata6.00: ATAPI: ASUS    DRW-2014L1T, 1.00, max UDMA/66
[    8.548447] ata6.00: configured for UDMA/66
[    8.549700] scsi 5:0:0:0: CD-ROM            ASUS     DRW-2014L1T      1.00 PQ: 0 ANSI: 5
[    8.554159] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    8.554161] Uniform CD-ROM driver Revision: 3.20
[    8.554220] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    8.554241] sr 5:0:0:0: Attached scsi generic sg1 type 5
[    8.554503] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
[    8.554509] sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
[    8.554510] sata_nv 0000:00:0d.2: Using SWNCQ mode
[    8.554767] sata_nv 0000:00:0d.2: setting latency timer to 64
[    8.554916] scsi6 : sata_nv
[    8.554988] scsi7 : sata_nv
[    8.555097] ata7: SATA max UDMA/133 cmd 0xf200 ctl 0xf100 bmdma 0xee00 irq 21
[    8.555099] ata8: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xee08 irq 21
[    9.286509] ata7: SATA link down (SStatus 0 SControl 300)
[   10.018518] ata8: SATA link down (SStatus 0 SControl 300)
[   10.018581] pata_amd 0000:00:0c.0: version 0.3.10
[   10.018602] pata_amd 0000:00:0c.0: setting latency timer to 64
[   10.018692] scsi8 : pata_amd
[   10.018744] scsi9 : pata_amd
[   10.019141] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfd00 irq 14
[   10.019142] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfd08 irq 15
[   10.183201] ata10: port disabled. ignoring.
[   10.183486] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   10.183745] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[   10.183751] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20
[   10.183758] ehci_hcd 0000:00:0a.1: setting latency timer to 64
[   10.183759] ehci_hcd 0000:00:0a.1: EHCI Host Controller
[   10.183798] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
[   10.183820] ehci_hcd 0000:00:0a.1: debug port 1
[   10.183823] ehci_hcd 0000:00:0a.1: cache line size of 64 is not supported
[   10.183836] ehci_hcd 0000:00:0a.1: irq 20, io mem 0xfe02e000
[   10.192216] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00
[   10.192262] usb usb1: configuration #1 chosen from 1 choice
[   10.192280] hub 1-0:1.0: USB hub found
[   10.192285] hub 1-0:1.0: 10 ports detected
[   10.192351] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   10.192619] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[   10.192621] ohci_hcd 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[   10.192627] ohci_hcd 0000:00:0a.0: setting latency timer to 64
[   10.192629] ohci_hcd 0000:00:0a.0: OHCI Host Controller
[   10.192654] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2
[   10.192663] ohci_hcd 0000:00:0a.0: irq 23, io mem 0xfe02f000
[   10.250232] usb usb2: configuration #1 chosen from 1 choice
[   10.250245] hub 2-0:1.0: USB hub found
[   10.250251] hub 2-0:1.0: 10 ports detected
[   10.250310] uhci_hcd: USB Universal Host Controller Interface driver
[   10.250359] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   10.250668] serio: i8042 KBD port at 0x60,0x64 irq 1
[   10.250671] serio: i8042 AUX port at 0x60,0x64 irq 12
[   10.260732] mice: PS/2 mouse device common for all mice
[   10.296753] rtc_cmos 00:05: RTC can wake from S4
[   10.296778] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[   10.296810] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[   10.296846] device-mapper: uevent: version 1.0.3
[   10.296950] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[   10.297098] device-mapper: multipath: version 1.0.5 loaded
[   10.297100] device-mapper: multipath round-robin: version 1.0.0 loaded
[   10.297264] cpuidle: using governor ladder
[   10.297265] cpuidle: using governor menu
[   10.297556] TCP cubic registered
[   10.297599] NET: Registered protocol family 10
[   10.297856] lo: Disabled Privacy Extensions
[   10.298032] NET: Registered protocol family 17
[   10.298044] Bluetooth: L2CAP ver 2.11
[   10.298045] Bluetooth: L2CAP socket layer initialized
[   10.298047] Bluetooth: SCO (Voice Link) ver 0.6
[   10.298047] Bluetooth: SCO socket layer initialized
[   10.298090] Bluetooth: RFCOMM socket layer initialized
[   10.298094] Bluetooth: RFCOMM TTY layer initialized
[   10.298095] Bluetooth: RFCOMM ver 1.10
[   10.298134] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
[   10.298189] powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x6
[   10.298192] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x8
[   10.298193] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xa
[   10.298194] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xc
[   10.298195] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xe
[   10.298196] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
[   10.298197] powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
[   10.298199] powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
[   10.298303] registered taskstats version 1
[   10.298426]   Magic number: 13:600:223
[   10.298499] rtc_cmos 00:05: setting system clock to 2009-06-05 10:12:24 UTC (1244196744)
[   10.298501] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   10.298502] EDD information not available.
[   10.298529] Freeing unused kernel memory: 532k freed
[   10.298689] Write protecting the kernel read-only data: 6684k
[   10.318648] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[   10.493141] Floppy drive(s): fd0 is 1.44M
[   10.512336] FDC 0 is a post-1991 82077
[   10.552227] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[   10.552232] ohci1394 0000:02:0b.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[   10.557842] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[   10.558183] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[   10.558187] forcedeth 0000:00:10.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
[   10.558190] forcedeth 0000:00:10.0: setting latency timer to 64
[   10.558226] nv_probe: set workaround bit for reversed mac addr
[   10.564519] usb 1-9: new high speed USB device using ehci_hcd and address 3
[   10.601931] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[fdfff000-fdfff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   10.703413] usb 1-9: configuration #1 chosen from 1 choice
[   11.016141] usb 2-6: new low speed USB device using ohci_hcd and address 2
[   11.076852] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:91:09:1c
[   11.076855] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[   11.077200] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
[   11.077203] forcedeth 0000:00:11.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21
[   11.077206] forcedeth 0000:00:11.0: setting latency timer to 64
[   11.077250] nv_probe: set workaround bit for reversed mac addr
[   11.230485] usb 2-6: configuration #1 chosen from 1 choice
[   11.252095] usbcore: registered new interface driver hiddev
[   11.258502] input: Weltrend Bar Code Reader as /devices/pci0000:00/0000:00:0a.0/usb2/2-6/2-6:1.0/input/input4
[   11.284172] generic-usb 0003:040B:6510.0001: input,hidraw0: USB HID v1.10 Keyboard [Weltrend Bar Code Reader] on usb-0000:00:0a.0-6/input0
[   11.284184] usbcore: registered new interface driver usbhid
[   11.284186] usbhid: v2.6:USB HID core driver
[   11.596872] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:91:11:c1
[   11.596875] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[   11.759782] PM: Starting manual resume from disk
[   11.759784] PM: Resume from partition 8:5
[   11.759785] PM: Checking hibernation image.
[   11.760099] PM: Resume from disk failed.
[   11.787399] EXT4-fs: barriers enabled
[   11.798360] kjournald2 starting.  Commit interval 5 seconds
[   11.798368] EXT4-fs: delayed allocation enabled
[   11.798369] EXT4-fs: file extents enabled
[   11.803749] EXT4-fs: mballoc enabled
[   11.803753] EXT4-fs: mounted filesystem with ordered data mode.
[   11.876795] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80000eca1c4]
[   16.361586] udev: starting version 141
[   17.774693] nvidia: module license 'NVIDIA' taints kernel.
[   17.815390] parport_pc 00:0a: reported by Plug and Play ACPI
[   17.815416] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   17.825995] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   17.927389] ACPI: I/O resource nForce2_smbus [0x1c00-0x1c3f] conflicts with ACPI region SM00 [0x1c00-0x1c05]
[   17.927391] ACPI: Device needs an ACPI driver
[   17.927429] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[   17.927453] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[   17.964929] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[   17.999233] ppdev: user-space parallel port driver
[   18.027044] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[   18.027048] nvidia 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[   18.027053] nvidia 0000:01:00.0: setting latency timer to 64
[   18.027278] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  180.44  Tue Mar 24 05:46:32 PST 2009
[   18.040423] cfg80211: Calling CRDA to update world regulatory domain
[   18.067397] ck804xrom ck804xrom_init_one(): Unable to register resource 0x00000000ff000000-0x00000000ffffffff - kernel bug?
[   18.067406] resource map sanity check conflict: 0xff000000 0xffffffff 0xfff80000 0xfff80fff pnp 00:0e
[   18.067412] ------------[ cut here ]------------
[   18.067414] WARNING: at /build/buildd/linux-2.6.28/arch/x86/mm/ioremap.c:226 __ioremap_caller+0x349/0x390()
[   18.067415] Modules linked in: ck804xrom(+) mtd chipreg snd_seq_midi_event snd_seq ppdev map_funcs snd_timer snd_seq_device i2c_nforce2 snd soundcore snd_page_alloc psmouse serio_raw pcspkr parport_pc parport k8temp cfg80211 nvidia(P) usbhid forcedeth ohci1394 ieee1394 floppy fbcon tileblit font bitblit softcursor
[   18.067429] Pid: 979, comm: modprobe Tainted: P           2.6.28-12-generic #43-Ubuntu
[   18.067431] Call Trace:
[   18.067436]  [<ffffffff802509bf>] warn_on_slowpath+0x5f/0x90
[   18.067439]  [<ffffffff8022f669>] ? default_spin_lock_flags+0x9/0x10
[   18.067440]  [<ffffffff8022f669>] ? default_spin_lock_flags+0x9/0x10
[   18.067443]  [<ffffffff80236c29>] __ioremap_caller+0x349/0x390
[   18.067446]  [<ffffffffa09332db>] ? ck804xrom_init_one+0x1ab/0x5ca [ck804xrom]
[   18.067448]  [<ffffffff80236d82>] ioremap_nocache+0x12/0x20
[   18.067450]  [<ffffffffa09332db>] ck804xrom_init_one+0x1ab/0x5ca [ck804xrom]
[   18.067453]  [<ffffffffa0865041>] init_ck804xrom+0x41/0x59 [ck804xrom]
[   18.067455]  [<ffffffffa0865000>] ? init_ck804xrom+0x0/0x59 [ck804xrom]
[   18.067457]  [<ffffffff8020a03b>] do_one_initcall+0x3b/0x170
[   18.067461]  [<ffffffff802424b2>] ? enqueue_entity+0x122/0x2b0
[   18.067463]  [<ffffffff8024870b>] ? enqueue_task_fair+0x7b/0x80
[   18.067465]  [<ffffffff8023e2a9>] ? wakeup_preempt_entity+0x59/0x60
[   18.067467]  [<ffffffff80249330>] ? check_preempt_wakeup+0x210/0x230
[   18.067469]  [<ffffffff8024a3cc>] ? try_to_wake_up+0x12c/0x2e0
[   18.067473]  [<ffffffff8027ef9d>] sys_init_module+0xad/0x1e0
[   18.067475]  [<ffffffff8021253a>] system_call_fastpath+0x16/0x1b
[   18.067476] ---[ end trace 29619fd5780d3796 ]---
[   18.193823] cfg80211: World regulatory domain updated:
[   18.193827] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.193829] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.193831] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.193833] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.193834] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.193835] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.416949] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[   18.416953] HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[   18.417091] HDA Intel 0000:00:0e.1: setting latency timer to 64
[   18.824643] phy0: Selected rate control algorithm 'pid'
[   18.888313] phy0: hwaddr 00:15:af:08:cd:5b, RTL8187vB (default) V1 + rtl8225z2
[   18.888336] usbcore: registered new interface driver rtl8187
[   19.123764] input: ImExPS/2 Logitech MX Mouse as /devices/platform/i8042/serio1/input/input6
[   19.266076] lp0: using parport0 (interrupt-driven).
[   19.283764] it87: Found IT8716F chip at 0x290, revision 1
[   19.283773] it87: in3 is VCC (+5V)
[   19.283773] it87: in7 is VCCH (+5V Stand-By)
[   19.537591] Adding 6040400k swap on /dev/sda5.  Priority:-1 extents:1 across:6040400k
[   20.066988] EXT4 FS on sda6, internal journal on sda6:8
[   20.830941] EXT4-fs: barriers enabled
[   20.848533] kjournald2 starting.  Commit interval 5 seconds
[   20.849186] EXT4 FS on sda1, internal journal on sda1:8
[   20.849187] EXT4-fs: delayed allocation enabled
[   20.849189] EXT4-fs: file extents enabled
[   20.859514] EXT4-fs: mballoc enabled
[   20.859517] EXT4-fs: mounted filesystem with ordered data mode.
[   21.105539] type=1505 audit(1244196755.306:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2174
[   21.135640] type=1505 audit(1244196755.334:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2178
[   21.135738] type=1505 audit(1244196755.334:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2178
[   21.135769] type=1505 audit(1244196755.334:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2178
[   21.135797] type=1505 audit(1244196755.334:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2178
[   21.222811] type=1505 audit(1244196755.422:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2183
[   21.222951] type=1505 audit(1244196755.422:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2183
[   21.242798] type=1505 audit(1244196755.442:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2187
[   30.576116] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   30.576118] Bluetooth: BNEP filters: protocol multicast
[   30.630127] Bridge firewalling registered
[   35.799773] forcedeth 0000:00:11.0: irq 2301 for MSI/MSI-X
[   35.799985] eth1: no link during initialization.
[   35.800586] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   35.801672] forcedeth 0000:00:10.0: irq 2300 for MSI/MSI-X
[   44.844078] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   93.000523] Clocksource tsc unstable (delta = -135262568 ns)
latelierlab@latelierlab-desktop:~$ 
preciso che all'avio del pc subito dopo grub mi compare questo:
0.918865 ACPI: expecting a [reference] package element, found type 0


avevo aperto un altro 3d che ho chiuso http://forum.ubuntu-it.org/viewtopic.ph ... 8#p2110998
dove il problema era stato parzialmente risolto

Suggerimenti????
Ultima modifica di matley81 il martedì 7 luglio 2009, 12:18, modificato 1 volta in totale.
nessuno sa dov è il villaggio degli gnome ?
Avatar utente
matley81
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 601
Iscrizione: martedì 18 settembre 2007, 10:27

Re: problema bios scheda madre

Messaggio da matley81 »

nessuno?????  >:( UP
nessuno sa dov è il villaggio degli gnome ?
Avatar utente
matley81
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 601
Iscrizione: martedì 18 settembre 2007, 10:27

Re: problema bios scheda madre

Messaggio da matley81 »

ragazzi nessuno ha idea? nessuno ha suggerimenti  :'(
nessuno sa dov è il villaggio degli gnome ?
Avatar utente
matley81
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 601
Iscrizione: martedì 18 settembre 2007, 10:27

Re: problema bios scheda madre

Messaggio da matley81 »

provo ancora... dai ci sarà qualcuno che sarà al corrente di questo bug... non mi sembra un problema da poco .... uppete
nessuno sa dov è il villaggio degli gnome ?
Avatar utente
ARM_
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1340
Iscrizione: giovedì 2 ottobre 2008, 10:32
Desktop: gnome-shell
Distribuzione: Ubuntu 11.04 x86_64

Re: problema bios scheda madre

Messaggio da ARM_ »

Da quello che vedo sembra un conflitto degli indirizzi IRQ.

prova a postare il risultato di

Codice: Seleziona tutto

cat /proc/interrupts
così capiamo se e dove ci sono conflitti.

Gia che ci sei, nel bios, guarda le impostazioni dell'ACPI e riportale (dopo essertele copiate su carta) alle impostazioni di fabbrica.
La vita e' un'avventura con un inizio deciso da altri, una fine non voluta da noi, e tanti intermezzi scelti a caso dal caso.
-- Roberto Gervaso
Avatar utente
matley81
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 601
Iscrizione: martedì 18 settembre 2007, 10:27

Re: problema bios scheda madre

Messaggio da matley81 »

grazie per la risposta...

ecco il risultato :

Codice: Seleziona tutto

latelierlab@latelierlab-desktop:~$ cat /proc/interrupts
           CPU0       CPU1       
  0:      83109    2938263   IO-APIC-edge      timer
  1:        240       6297   IO-APIC-edge      i8042
  4:          0          4   IO-APIC-edge    
  6:          0          6   IO-APIC-edge      floppy
  7:          1          0   IO-APIC-edge      parport0
  8:          0          1   IO-APIC-edge      rtc0
  9:          0          0   IO-APIC-fasteoi   acpi
 12:      15771     418582   IO-APIC-edge      i8042
 14:          0          0   IO-APIC-edge      pata_amd
 15:          0          0   IO-APIC-edge      pata_amd
 16:        295      16539   IO-APIC-fasteoi   sata_sil24, ohci1394, nvidia
 20:      10356     445491   IO-APIC-fasteoi   ehci_hcd:usb1, HDA Intel
 21:          0          0   IO-APIC-fasteoi   sata_nv
 22:       2227     100742   IO-APIC-fasteoi   sata_nv
 23:       2583     148777   IO-APIC-fasteoi   sata_nv, ohci_hcd:usb2
2300:      33608    1535903   PCI-MSI-edge      eth0
2301:      32753    1482622   PCI-MSI-edge      eth1
NMI:          0          0   Non-maskable interrupts
LOC:    1689170     764220   Local timer interrupts
RES:     616607     419854   Rescheduling interrupts
CAL:       5407       4447   Function call interrupts
TLB:       6095       4566   TLB shootdowns
SPU:          0          0   Spurious interrupts
ERR:          1
MIS:          0
latelierlab@latelierlab-desktop:~$ 
dopo ti posto l acpi dal bios
nessuno sa dov è il villaggio degli gnome ?
Avatar utente
matley81
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 601
Iscrizione: martedì 18 settembre 2007, 10:27

Re: problema bios scheda madre

Messaggio da matley81 »

dal bios sono andato su power e quindi ho trovato :
ACPI S1&S3
ACPI APIC SUPPORT ENABLED
nessuno sa dov è il villaggio degli gnome ?
paoloci
Rampante Reduce
Rampante Reduce
Messaggi: 7507
Iscrizione: mercoledì 28 maggio 2008, 12:08

Re: problema bios scheda madre

Messaggio da paoloci »

matley81

mi ricordo di averti dato due indicazioni, in un diverso post, ma, perdonami, mi sembra mal posta la tua domanda.
A fronte della segnalazione di errori, non riporti i sintomi negativi che riscontri.
in altre parole cosa cìè ce non va.
poi spendi due parole per descrivere il tuo sistema: processore e RAM
Avatar utente
matley81
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 601
Iscrizione: martedì 18 settembre 2007, 10:27

Re: problema bios scheda madre

Messaggio da matley81 »

hai ragione mi sono espresso male perchè ho messo il link sull'altro post ma in effetti ogni 3d fa storia a sè;

Allora la mia scheda madre è una asus m2n32 sli deluxe wifi con l ultimo bios, e la cpu è una amd2 6000+ x2 con 2 g di ram ddr2 800;
nel momento in cui effettuo il boot subito dopo grub mi compare questo messaggiodopo 5 sec circa:

0.918865 ACPI: expecting a [reference] package element, found type 0

e dopo si avvia normalmente; cercando le di un non funzionamento di uno scanner in un altro 3d mi è stato suggerito un comando ovvero dmesg e di seguito di nuovo il risultato

Codice: Seleziona tutto

[    0.406696] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.406847] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[    0.406996] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 *11 14 15)
[    0.407147] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[    0.407296] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.407446] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.407596] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.407746] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.407898] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
[    0.408061] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
[    0.408211] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
[    0.408392] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[    0.408569] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[    0.408746] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.408922] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[    0.409099] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
[    0.409276] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[    0.409454] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[    0.409632] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[    0.409808] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[    0.409985] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[    0.410162] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
[    0.410338] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[    0.410515] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[    0.410691] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[    0.410868] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[    0.411045] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[    0.411222] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.411399] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.411576] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[    0.411752] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
[    0.411862] ACPI: WMI: Mapper loaded
[    0.411909] SCSI subsystem initialized
[    0.412013] libata version 3.00 loaded.
[    0.412021] usbcore: registered new interface driver usbfs
[    0.412031] usbcore: registered new interface driver hub
[    0.412041] usbcore: registered new device driver usb
[    0.412041] PCI: Using ACPI for IRQ routing
[    0.424031] Bluetooth: Core ver 2.13
[    0.424057] NET: Registered protocol family 31
[    0.424057] Bluetooth: HCI device and connection manager initialized
[    0.424057] Bluetooth: HCI socket layer initialized
[    0.424057] NET: Registered protocol family 8
[    0.424057] NET: Registered protocol family 20
[    0.424057] NetLabel: Initializing
[    0.424057] NetLabel:  domain hash size = 128
[    0.424057] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.424057] NetLabel:  unlabeled traffic allowed by default
[    0.424191] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[    0.424194] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.432071] AppArmor: AppArmor Filesystem Enabled
[    0.436026] Switched to high resolution mode on CPU 0
[    0.436035] Switched to high resolution mode on CPU 1
[    0.444174] pnp: PnP ACPI init
[    0.444190] ACPI: bus type pnp registered
[    0.448459] pnp: PnP ACPI: found 15 devices
[    0.448460] ACPI: ACPI bus type pnp unregistered
[    0.448467] system 00:01: ioport range 0x1000-0x107f has been reserved
[    0.448468] system 00:01: ioport range 0x1080-0x10ff has been reserved
[    0.448470] system 00:01: ioport range 0x1400-0x147f has been reserved
[    0.448472] system 00:01: ioport range 0x1480-0x14ff has been reserved
[    0.448473] system 00:01: ioport range 0x1800-0x187f has been reserved
[    0.448475] system 00:01: ioport range 0x1880-0x18ff has been reserved
[    0.448478] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    0.448480] system 00:02: ioport range 0x800-0x87f has been reserved
[    0.448481] system 00:02: ioport range 0x290-0x297 has been reserved
[    0.448486] system 00:0d: iomem range 0xf0000000-0xf3ffffff has been reserved
[    0.448489] system 00:0e: iomem range 0xcca00-0xcffff has been reserved
[    0.448491] system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
[    0.448493] system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
[    0.448494] system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
[    0.448496] system 00:0e: iomem range 0xfefff000-0xfefff0ff has been reserved
[    0.448497] system 00:0e: iomem range 0x7fee0000-0x7fefffff could not be reserved
[    0.448499] system 00:0e: iomem range 0xffff0000-0xffffffff has been reserved
[    0.448501] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[    0.448502] system 00:0e: iomem range 0x100000-0x7fedffff could not be reserved
[    0.448504] system 00:0e: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.448506] system 00:0e: iomem range 0xfee00000-0xfeefffff has been reserved
[    0.448508] system 00:0e: iomem range 0xfefff000-0xfeffffff could not be reserved
[    0.448509] system 00:0e: iomem range 0xfff80000-0xfff80fff has been reserved
[    0.448511] system 00:0e: iomem range 0xfff90000-0xfffbffff has been reserved
[    0.448513] system 00:0e: iomem range 0xfffed000-0xfffeffff has been reserved
[    0.453133] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[    0.453135] pci 0000:00:04.0:   IO window: 0xd000-0xdfff
[    0.453137] pci 0000:00:04.0:   MEM window: 0xf8000000-0xfbffffff
[    0.453139] pci 0000:00:04.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
[    0.453142] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02
[    0.453143] pci 0000:00:0e.0:   IO window: disabled
[    0.453145] pci 0000:00:0e.0:   MEM window: 0xfdf00000-0xfdffffff
[    0.453147] pci 0000:00:0e.0:   PREFETCH window: disabled
[    0.453149] pci 0000:00:16.0: PCI bridge, secondary bus 0000:03
[    0.453151] pci 0000:00:16.0:   IO window: 0xc000-0xcfff
[    0.453153] pci 0000:00:16.0:   MEM window: 0xfde00000-0xfdefffff
[    0.453155] pci 0000:00:16.0:   PREFETCH window: disabled
[    0.453161] pci 0000:00:04.0: setting latency timer to 64
[    0.453164] pci 0000:00:0e.0: setting latency timer to 64
[    0.453168] pci 0000:00:16.0: setting latency timer to 64
[    0.453170] bus: 00 index 0 io port: [0x00-0xffff]
[    0.453171] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[    0.453172] bus: 01 index 0 io port: [0xd000-0xdfff]
[    0.453174] bus: 01 index 1 mmio: [0xf8000000-0xfbffffff]
[    0.453175] bus: 01 index 2 mmio: [0xe0000000-0xefffffff]
[    0.453176] bus: 01 index 3 mmio: [0x0-0x0]
[    0.453177] bus: 02 index 0 mmio: [0x0-0x0]
[    0.453178] bus: 02 index 1 mmio: [0xfdf00000-0xfdffffff]
[    0.453179] bus: 02 index 2 mmio: [0x0-0x0]
[    0.453180] bus: 02 index 3 io port: [0x00-0xffff]
[    0.453182] bus: 02 index 4 mmio: [0x000000-0xffffffffffffffff]
[    0.453183] bus: 03 index 0 io port: [0xc000-0xcfff]
[    0.453184] bus: 03 index 1 mmio: [0xfde00000-0xfdefffff]
[    0.453185] bus: 03 index 2 mmio: [0x0-0x0]
[    0.453186] bus: 03 index 3 mmio: [0x0-0x0]
[    0.453195] NET: Registered protocol family 2
[    0.488220] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.488477] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.489760] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.490166] TCP: Hash tables configured (established 262144 bind 65536)
[    0.490167] TCP reno registered
[    0.500245] NET: Registered protocol family 1
[    0.500329] checking if image is initramfs... it is
[    0.896993] Freeing initrd memory: 7757k freed
[    0.900350] audit: initializing netlink socket (disabled)
[    0.900364] type=2000 audit(1244472780.900:1): initialized
[    0.905756] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.906555] VFS: Disk quotas dquot_6.5.1
[    0.906589] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.906969] fuse init (API version 7.10)
[    0.907018] msgmni has been set to 3971
[    0.907160] alg: No test for stdrng (krng)
[    0.907171] io scheduler noop registered
[    0.907172] io scheduler anticipatory registered
[    0.907173] io scheduler deadline registered
[    0.907200] io scheduler cfq registered (default)
[    0.907209] pci 0000:00:00.0: Enabling HT MSI Mapping
[    0.907235] pci 0000:00:04.0: Enabling HT MSI Mapping
[    0.920787] pci 0000:00:0d.0: Enabling HT MSI Mapping
[    0.920795] pci 0000:00:0d.1: Enabling HT MSI Mapping
[    0.920803] pci 0000:00:0d.2: Enabling HT MSI Mapping
[    0.920809] pci 0000:00:0e.0: Enabling HT MSI Mapping
[    0.920817] pci 0000:00:0e.1: Enabling HT MSI Mapping
[    0.920827] pci 0000:00:10.0: Enabling HT MSI Mapping
[    0.920837] pci 0000:00:11.0: Enabling HT MSI Mapping
[    0.920844] pci 0000:00:16.0: Enabling HT MSI Mapping
[    0.920857] pci 0000:01:00.0: Boot video device
[    0.926359] pcieport-driver 0000:00:04.0: setting latency timer to 64
[    0.926375] pcieport-driver 0000:00:04.0: found MSI capability
[    0.926386] pcieport-driver 0000:00:04.0: irq 2303 for MSI/MSI-X
[    0.926391] pci_express 0000:00:04.0:pcie00: allocate port service
[    0.926399] pci_express 0000:00:04.0:pcie03: allocate port service
[    0.926424] pcieport-driver 0000:00:16.0: setting latency timer to 64
[    0.926445] pcieport-driver 0000:00:16.0: found MSI capability
[    0.926456] pcieport-driver 0000:00:16.0: irq 2302 for MSI/MSI-X
[    0.926462] pci_express 0000:00:16.0:pcie00: allocate port service
[    0.926469] pci_express 0000:00:16.0:pcie03: allocate port service
[    0.926503] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.926508] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.926604] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.926606] ACPI: Power Button (FF) [PWRF]
[    0.926632] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.926633] ACPI: Power Button (CM) [PWRB]
[    0.926671] fan PNP0C0B:00: registered as cooling_device0
[    0.926674] ACPI: Fan [FAN] (on)
[    0.926907] ACPI: processor limited to max C-state 1
[    0.926918] processor ACPI_CPU:00: registered as cooling_device1
[    0.926939] processor ACPI_CPU:01: registered as cooling_device2
[    0.931045] ACPI Warning (nspredef-0858): \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference [20080926]
[    0.931050] ACPI: Expecting a [Reference] package element, found type 0
[    0.931309] thermal LNXTHERM:01: registered as thermal_zone0
[    0.931684] ACPI: Thermal Zone [THRM] (40 C)
[    0.956856] Linux agpgart interface v0.103
[    0.956863] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    0.956947] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.957153] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.957630] brd: module loaded
[    0.957819] loop: module loaded
[    0.957861] Fixed MDIO Bus: probed
[    0.957865] PPP generic driver version 2.4.2
[    0.957900] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.957917] Driver 'sd' needs updating - please use bus_type methods
[    0.957922] Driver 'sr' needs updating - please use bus_type methods
[    0.958005] sata_sil24 0000:03:00.0: version 1.1
[    0.958282] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[    0.958291] sata_sil24 0000:03:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[    0.958350] sata_sil24 0000:03:00.0: setting latency timer to 64
[    0.958556] scsi0 : sata_sil24
[    0.958641] scsi1 : sata_sil24
[    0.958663] ata1: SATA max UDMA/100 host m128@0xfdeff000 port 0xfdef8000 irq 16
[    0.958666] ata2: SATA max UDMA/100 host m128@0xfdeff000 port 0xfdefa000 irq 16
[    3.036228] ata1: SATA link down (SStatus 0 SControl 0)
[    5.116227] ata2: SATA link down (SStatus 0 SControl 0)
[    5.116273] sata_nv 0000:00:0d.0: version 3.5
[    5.116538] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[    5.116544] sata_nv 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    5.116546] sata_nv 0000:00:0d.0: Using SWNCQ mode
[    5.116803] sata_nv 0000:00:0d.0: setting latency timer to 64
[    5.116939] scsi2 : sata_nv
[    5.116988] scsi3 : sata_nv
[    5.117101] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf800 irq 23
[    5.117103] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf808 irq 23
[    5.850603] ata3: SATA link down (SStatus 0 SControl 300)
[    6.728327] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    6.777857] ata4.00: ATA-7: MAXTOR STM3160215AS, 3.AAD, max UDMA/133
[    6.777859] ata4.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    6.844496] ata4.00: configured for UDMA/133
[    6.844522] isa bounce pool size: 16 pages
[    6.844583] scsi 3:0:0:0: Direct-Access     ATA      MAXTOR STM316021 3.AA PQ: 0 ANSI: 5
[    6.844643] sd 3:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[    6.844653] sd 3:0:0:0: [sda] Write Protect is off
[    6.844655] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.844670] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.844720] sd 3:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[    6.844728] sd 3:0:0:0: [sda] Write Protect is off
[    6.844729] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.844743] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.844746]  sda: sda1 sda2 < sda5 sda6 >
[    6.912128] sd 3:0:0:0: [sda] Attached SCSI disk
[    6.912160] sd 3:0:0:0: Attached scsi generic sg0 type 0
[    6.912432] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[    6.912439] sata_nv 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[    6.912441] sata_nv 0000:00:0d.1: Using SWNCQ mode
[    6.912710] sata_nv 0000:00:0d.1: setting latency timer to 64
[    6.912835] scsi4 : sata_nv
[    6.912881] scsi5 : sata_nv
[    6.912994] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf300 irq 22
[    6.912995] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf308 irq 22
[    7.646603] ata5: SATA link down (SStatus 0 SControl 300)
[    8.524326] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    8.532435] ata6.00: ATAPI: ASUS    DRW-2014L1T, 1.00, max UDMA/66
[    8.548445] ata6.00: configured for UDMA/66
[    8.549698] scsi 5:0:0:0: CD-ROM            ASUS     DRW-2014L1T      1.00 PQ: 0 ANSI: 5
[    8.554151] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    8.554153] Uniform CD-ROM driver Revision: 3.20
[    8.554211] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    8.554233] sr 5:0:0:0: Attached scsi generic sg1 type 5
[    8.554494] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
[    8.554501] sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
[    8.554502] sata_nv 0000:00:0d.2: Using SWNCQ mode
[    8.554758] sata_nv 0000:00:0d.2: setting latency timer to 64
[    8.554910] scsi6 : sata_nv
[    8.554981] scsi7 : sata_nv
[    8.555092] ata7: SATA max UDMA/133 cmd 0xf200 ctl 0xf100 bmdma 0xee00 irq 21
[    8.555093] ata8: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xee08 irq 21
[    9.286508] ata7: SATA link down (SStatus 0 SControl 300)
[   10.018517] ata8: SATA link down (SStatus 0 SControl 300)
[   10.018580] pata_amd 0000:00:0c.0: version 0.3.10
[   10.018601] pata_amd 0000:00:0c.0: setting latency timer to 64
[   10.018691] scsi8 : pata_amd
[   10.018743] scsi9 : pata_amd
[   10.019141] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfd00 irq 14
[   10.019142] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfd08 irq 15
[   10.183200] ata10: port disabled. ignoring.
[   10.183485] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   10.183744] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[   10.183750] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20
[   10.183757] ehci_hcd 0000:00:0a.1: setting latency timer to 64
[   10.183758] ehci_hcd 0000:00:0a.1: EHCI Host Controller
[   10.183797] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
[   10.183819] ehci_hcd 0000:00:0a.1: debug port 1
[   10.183822] ehci_hcd 0000:00:0a.1: cache line size of 64 is not supported
[   10.183835] ehci_hcd 0000:00:0a.1: irq 20, io mem 0xfe02e000
[   10.192216] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00
[   10.192262] usb usb1: configuration #1 chosen from 1 choice
[   10.192280] hub 1-0:1.0: USB hub found
[   10.192285] hub 1-0:1.0: 10 ports detected
[   10.192350] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   10.192617] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[   10.192619] ohci_hcd 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[   10.192625] ohci_hcd 0000:00:0a.0: setting latency timer to 64
[   10.192627] ohci_hcd 0000:00:0a.0: OHCI Host Controller
[   10.192652] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2
[   10.192661] ohci_hcd 0000:00:0a.0: irq 23, io mem 0xfe02f000
[   10.250232] usb usb2: configuration #1 chosen from 1 choice
[   10.250245] hub 2-0:1.0: USB hub found
[   10.250251] hub 2-0:1.0: 10 ports detected
[   10.250310] uhci_hcd: USB Universal Host Controller Interface driver
[   10.250358] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   10.250681] serio: i8042 KBD port at 0x60,0x64 irq 1
[   10.250684] serio: i8042 AUX port at 0x60,0x64 irq 12
[   10.260731] mice: PS/2 mouse device common for all mice
[   10.296751] rtc_cmos 00:05: RTC can wake from S4
[   10.296777] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[   10.296809] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[   10.296845] device-mapper: uevent: version 1.0.3
[   10.296949] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[   10.297097] device-mapper: multipath: version 1.0.5 loaded
[   10.297099] device-mapper: multipath round-robin: version 1.0.0 loaded
[   10.297263] cpuidle: using governor ladder
[   10.297264] cpuidle: using governor menu
[   10.297556] TCP cubic registered
[   10.297599] NET: Registered protocol family 10
[   10.297871] lo: Disabled Privacy Extensions
[   10.298061] NET: Registered protocol family 17
[   10.298072] Bluetooth: L2CAP ver 2.11
[   10.298073] Bluetooth: L2CAP socket layer initialized
[   10.298075] Bluetooth: SCO (Voice Link) ver 0.6
[   10.298076] Bluetooth: SCO socket layer initialized
[   10.298119] Bluetooth: RFCOMM socket layer initialized
[   10.298123] Bluetooth: RFCOMM TTY layer initialized
[   10.298124] Bluetooth: RFCOMM ver 1.10
[   10.298163] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
[   10.298218] powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x6
[   10.298220] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x8
[   10.298222] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xa
[   10.298223] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xc
[   10.298224] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xe
[   10.298225] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
[   10.298226] powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
[   10.298227] powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
[   10.298332] registered taskstats version 1
[   10.298455]   Magic number: 13:423:889
[   10.298529] rtc_cmos 00:05: setting system clock to 2009-06-08 14:53:11 UTC (1244472791)
[   10.298531] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   10.298532] EDD information not available.
[   10.298559] Freeing unused kernel memory: 532k freed
[   10.298718] Write protecting the kernel read-only data: 6684k
[   10.318030] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[   10.499939] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[   10.499943] ohci1394 0000:02:0b.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[   10.549703] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[fdfff000-fdfff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   10.564517] usb 1-9: new high speed USB device using ehci_hcd and address 3
[   10.578953] Floppy drive(s): fd0 is 1.44M
[   10.591590] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[   10.591909] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[   10.591912] forcedeth 0000:00:10.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
[   10.591916] forcedeth 0000:00:10.0: setting latency timer to 64
[   10.591955] nv_probe: set workaround bit for reversed mac addr
[   10.596438] FDC 0 is a post-1991 82077
[   10.703537] usb 1-9: configuration #1 chosen from 1 choice
[   11.020555] usb 2-6: new low speed USB device using ohci_hcd and address 2
[   11.112930] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:91:09:1c
[   11.112933] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[   11.113248] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
[   11.113251] forcedeth 0000:00:11.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21
[   11.113255] forcedeth 0000:00:11.0: setting latency timer to 64
[   11.113293] nv_probe: set workaround bit for reversed mac addr
[   11.248770] usb 2-6: configuration #1 chosen from 1 choice
[   11.254658] usbcore: registered new interface driver hiddev
[   11.261506] input: Weltrend Bar Code Reader as /devices/pci0000:00/0000:00:0a.0/usb2/2-6/2-6:1.0/input/input4
[   11.292165] generic-usb 0003:040B:6510.0001: input,hidraw0: USB HID v1.10 Keyboard [Weltrend Bar Code Reader] on usb-0000:00:0a.0-6/input0
[   11.292177] usbcore: registered new interface driver usbhid
[   11.292179] usbhid: v2.6:USB HID core driver
[   11.632954] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:91:11:c1
[   11.632957] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[   11.828694] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80000eca1c4]
[   11.834999] PM: Starting manual resume from disk
[   11.835001] PM: Resume from partition 8:5
[   11.835003] PM: Checking hibernation image.
[   11.835333] PM: Resume from disk failed.
[   11.862443] EXT4-fs: barriers enabled
[   11.873277] kjournald2 starting.  Commit interval 5 seconds
[   11.873285] EXT4-fs: delayed allocation enabled
[   11.873287] EXT4-fs: file extents enabled
[   11.878659] EXT4-fs: mballoc enabled
[   11.878663] EXT4-fs: mounted filesystem with ordered data mode.
[   16.444851] udev: starting version 141
[   17.841281] nvidia: module license 'NVIDIA' taints kernel.
[   17.886017] ACPI: I/O resource nForce2_smbus [0x1c00-0x1c3f] conflicts with ACPI region SM00 [0x1c00-0x1c05]
[   17.886019] ACPI: Device needs an ACPI driver
[   17.886062] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[   17.886087] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[   18.001082] ck804xrom ck804xrom_init_one(): Unable to register resource 0x00000000ff000000-0x00000000ffffffff - kernel bug?
[   18.001090] resource map sanity check conflict: 0xff000000 0xffffffff 0xfff80000 0xfff80fff pnp 00:0e
[   18.001096] ------------[ cut here ]------------
[   18.001097] WARNING: at /build/buildd/linux-2.6.28/arch/x86/mm/ioremap.c:226 __ioremap_caller+0x349/0x390()
[   18.001099] Modules linked in: ck804xrom(+) mtd chipreg map_funcs k8temp snd soundcore snd_page_alloc i2c_nforce2 cfg80211(+) nvidia(P+) usbhid forcedeth floppy ohci1394 ieee1394 fbcon tileblit font bitblit softcursor
[   18.001109] Pid: 980, comm: modprobe Tainted: P           2.6.28-12-generic #43-Ubuntu
[   18.001111] Call Trace:
[   18.001115]  [<ffffffff802509bf>] warn_on_slowpath+0x5f/0x90
[   18.001118]  [<ffffffff8022f669>] ? default_spin_lock_flags+0x9/0x10
[   18.001120]  [<ffffffff8022f669>] ? default_spin_lock_flags+0x9/0x10
[   18.001122]  [<ffffffff80236c29>] __ioremap_caller+0x349/0x390
[   18.001125]  [<ffffffffa08b32db>] ? ck804xrom_init_one+0x1ab/0x5ca [ck804xrom]
[   18.001127]  [<ffffffff80236d82>] ioremap_nocache+0x12/0x20
[   18.001129]  [<ffffffffa08b32db>] ck804xrom_init_one+0x1ab/0x5ca [ck804xrom]
[   18.001132]  [<ffffffffa08b9041>] init_ck804xrom+0x41/0x59 [ck804xrom]
[   18.001134]  [<ffffffffa08b9000>] ? init_ck804xrom+0x0/0x59 [ck804xrom]
[   18.001137]  [<ffffffff8020a03b>] do_one_initcall+0x3b/0x170
[   18.001140]  [<ffffffff802424b2>] ? enqueue_entity+0x122/0x2b0
[   18.001142]  [<ffffffff8024870b>] ? enqueue_task_fair+0x7b/0x80
[   18.001144]  [<ffffffff8023e2a9>] ? wakeup_preempt_entity+0x59/0x60
[   18.001146]  [<ffffffff80249330>] ? check_preempt_wakeup+0x210/0x230
[   18.001148]  [<ffffffff8024a3cc>] ? try_to_wake_up+0x12c/0x2e0
[   18.001151]  [<ffffffff8027ef9d>] sys_init_module+0xad/0x1e0
[   18.001153]  [<ffffffff8021253a>] system_call_fastpath+0x16/0x1b
[   18.001155] ---[ end trace ad4ccd9bf232c7d6 ]---
[   18.024219] parport_pc 00:0a: reported by Plug and Play ACPI
[   18.024245] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   18.034404] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   18.096070] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[   18.096074] nvidia 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[   18.096079] nvidia 0000:01:00.0: setting latency timer to 64
[   18.097015] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  180.44  Tue Mar 24 05:46:32 PST 2009
[   18.108141] cfg80211: Calling CRDA to update world regulatory domain
[   18.108974] ppdev: user-space parallel port driver
[   18.206343] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[   18.277408] cfg80211: World regulatory domain updated:
[   18.277411] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.277413] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.277415] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.277416] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.277417] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.277419] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.467001] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[   18.467006] HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[   18.467133] HDA Intel 0000:00:0e.1: setting latency timer to 64
[   18.733167] phy0: Selected rate control algorithm 'pid'
[   18.795985] phy0: hwaddr 00:15:af:08:cd:5b, RTL8187vB (default) V1 + rtl8225z2
[   18.796010] usbcore: registered new interface driver rtl8187
[   18.913705] input: PS2++ Logitech MX Mouse as /devices/platform/i8042/serio1/input/input6
[   19.324539] lp0: using parport0 (interrupt-driven).
[   19.333939] it87: Found IT8716F chip at 0x290, revision 1
[   19.333948] it87: in3 is VCC (+5V)
[   19.333949] it87: in7 is VCCH (+5V Stand-By)
[   19.587224] Adding 6040400k swap on /dev/sda5.  Priority:-1 extents:1 across:6040400k
[   20.116299] EXT4 FS on sda6, internal journal on sda6:8
[   20.881011] EXT4-fs: barriers enabled
[   20.898564] kjournald2 starting.  Commit interval 5 seconds
[   20.899196] EXT4 FS on sda1, internal journal on sda1:8
[   20.899198] EXT4-fs: delayed allocation enabled
[   20.899199] EXT4-fs: file extents enabled
[   20.908660] EXT4-fs: mballoc enabled
[   20.908664] EXT4-fs: mounted filesystem with ordered data mode.
[   21.122347] type=1505 audit(1244472802.321:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2173
[   21.152306] type=1505 audit(1244472802.349:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2177
[   21.152403] type=1505 audit(1244472802.349:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2177
[   21.152436] type=1505 audit(1244472802.349:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2177
[   21.152465] type=1505 audit(1244472802.349:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2177
[   21.240017] type=1505 audit(1244472802.437:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2182
[   21.240156] type=1505 audit(1244472802.437:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2182
[   21.259746] type=1505 audit(1244472802.457:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2186
[   30.828600] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   30.828606] Bluetooth: BNEP filters: protocol multicast
[   30.895262] Bridge firewalling registered
[   31.000774] Clocksource tsc unstable (delta = -178377056 ns)
[   35.798605] forcedeth 0000:00:11.0: irq 2301 for MSI/MSI-X
[   35.798841] eth1: no link during initialization.
[   35.799978] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   35.801868] forcedeth 0000:00:10.0: irq 2300 for MSI/MSI-X
[   44.912090] ADDRCONF(NETDEV_UP): wlan0: link is not ready
latelierlab@latelierlab-desktop:~$ 
secondo paoloci
"spaventano più questi
[Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor.
resource map sanity check conflict: 0xff000000 0xffffffff 0xfff80000 0xfff80fff pnp 00:0e"

Io non me ne intendo però necessito di avere un sistema stabile e sicuro perchè il pc è per lavoro e funge anche da server al mio gestionale e non vorrei che quello che sembra essere un bug mi possa creare problemi. qui c è il post dove paoloci mi ha aiutato http://forum.ubuntu-it.org/viewtopic.php?t=290698 . Ah non scusarti hai ragione avevo mal posto il problema; grazie
Ultima modifica di matley81 il lunedì 8 giugno 2009, 18:20, modificato 1 volta in totale.
nessuno sa dov è il villaggio degli gnome ?
Avatar utente
ARM_
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1340
Iscrizione: giovedì 2 ottobre 2008, 10:32
Desktop: gnome-shell
Distribuzione: Ubuntu 11.04 x86_64

Re: problema bios scheda madre

Messaggio da ARM_ »

Allora, ti dico. io ho una p5b-vm, anch'essa aggiornata con l'ultimo bios, e non riscontro problemi di sorta.
Ciò che ti dico ora quindi non ho modo di sperimentarlo in prima persona.

Ovviamente fatti una copia di backup dei file importanti.

1)prova ad avviare il pc da livecd e guarda se i problemi riscontrati sono gli stessi.

2)prova a sospendere e ibernare la tua macchina, e vedi se il riavvio procede normalmente.
Se così fosse, ritengo che i messaggi di errore siano solo un fastidioso "falso allarme", e ignora la cosa.

Se invece i riavii non avvenissero con successo, prendi in considerazione l'opzione di disabilitare l'acpi dal bios, anche se non so che impatto possa avere sulle prestazioni del server.

Comunque, credo che anche se lasci le cose come sono non ci siano problemi.
Purtroppo non posso fare molto altro.
La vita e' un'avventura con un inizio deciso da altri, una fine non voluta da noi, e tanti intermezzi scelti a caso dal caso.
-- Roberto Gervaso
paoloci
Rampante Reduce
Rampante Reduce
Messaggi: 7507
Iscrizione: mercoledì 28 maggio 2008, 12:08

Re: problema bios scheda madre

Messaggio da paoloci »

matley81
vediamo chi è che da
resource map sanity check conflict: 0xff000000 0xffffffff 0xfff80000 0xfff80fff pnp 00:0e"

mandaci lspci

poi vedendo
ACPI: expecting a [reference] package element, found type 0
risponde
[Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain 

per quanto riguarda
Clocksource tsc unstable (delta = -178377056 ns)
vai sul bios e disattiva (visto che è un AMD)
Cool and quiet

Impedendo lo scaling delle CPU rendi il clock di sistema stabile

per adesso
installa lm-sensors subito e fai un controllo delle temperature delle CPU , di sistema e della GPU mettendo le iconcine sul desktop
poi vediamo il resto
Avatar utente
matley81
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 601
Iscrizione: martedì 18 settembre 2007, 10:27

Re: problema bios scheda madre

Messaggio da matley81 »

lspci:

Codice: Seleziona tutto

latelierlab@latelierlab-desktop:~$ lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:08.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a1)
00:09.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a2)
00:09.1 SMBus: nVidia Corporation MCP55 SMBus (rev a2)
00:0a.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
00:0a.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
00:0c.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
00:0d.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:0d.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:0d.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
00:0e.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)
00:10.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
00:11.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
00:16.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation G80 [GeForce 8800 GTS] (rev a2)
02:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
03:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01)

Se disabilito il Cool and quiet il pc scald molto di più; l ho attivato proprio per questo problema perchè prima la temperatura della cpu si attestava intorno ai 55°; attivando cool and quiet invece ho questo

Codice: Seleziona tutto

latelierlab@latelierlab-desktop:~$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:       +40.0°C  (crit = +75.0°C)                  

k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:  +42.0°C                                    
Core1 Temp:  +41.0°C                                    

it8716-isa-0290
Adapter: ISA adapter
VCore:       +1.14 V  (min =  +0.00 V, max =  +4.08 V)   
VDDR:        +0.00 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
+3.3V:       +3.33 V  (min =  +0.00 V, max =  +4.08 V)   
+5V:         +4.89 V  (min =  +0.00 V, max =  +6.85 V)   
+12V:       +12.03 V  (min =  +0.00 V, max = +16.32 V)   
in5:         +3.62 V  (min =  +0.00 V, max =  +4.08 V)   
in6:         +0.00 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
5VSB:        +4.76 V  (min =  +0.00 V, max =  +6.85 V)   
VBat:        +3.10 V
fan1:       2481 RPM  (min =    0 RPM)
fan2:          0 RPM  (min =    0 RPM)
fan3:          0 RPM  (min =    0 RPM)
temp1:       +43.0°C  (low  =  -1.0°C, high = +127.0°C)  sensor = thermal diode
temp2:       +45.0°C  (low  =  -1.0°C, high = +127.0°C)  sensor = thermistor
temp3:       +37.0°C  (low  =  -1.0°C, high = +127.0°C)  sensor = thermistor
cpu0_vid:   +0.763 V

ho trovato questo che sembra perfettamente inerente al mio problema, solo che non ho capito come fa a risolverlo... l ho estratto da questo post http://lula75.wordpress.com/2009/04/25/ ... os-bacato/
e dice

Codice: Seleziona tutto


      § How to edit acpi DSDT table when you have a defective BIOS

Data l’immonda quantità di BIOS pietosi che i produttori di schede madri producono e distribuiscono, capita spesso che usando GNU/Linux (o anche un sistema operativo del genere *BSD o MacOS) su un elaboratore elettronico piuttosto recente le funzionalità ACPI del sistema non siano proprio ottimali.

      § Out there we have an awfully big quantity of defective BIOS assembled and distribuited by mainboards’ makers, and if we are using GNU/Linux (or other operating systems as MacOS or *BSD-like ones) on a new computer maybe ACPI functions are not so excellent, indeed.

Purtroppo ciò è essenzialmente dovuto al fatto che:

      § There are some reasons:

1) esiste uno standard industriale ACPI (standard di un consorzio di aziende che vede come capofila Intel Corporation), ma, come spesso succede, non viene sempre seguito da tutti;

      § ACPI is an industrial standard (there is a consortium with Intel Corp. as head), but not all firms follow ACPI specifications throughly.

2) i produttori delle schede madri e del relativo BIOS sono spesso superficiali o ignoranti di sistemi operativi alternativi/liberi e quindi tutti è pensato ed implementato con riferimento a sistemi MS Windows;

      § Several mainboards’ and BIOS makers are not really interested in alternative and free-as-in-freedom operating system, and they blindly see MS Windows as a unique operating system to devote all of their effort to.

3) il BIOS è il programma per definizione chiuso e proprietario, non documentato, non è facilmente sostituibile in un’ottica opensource (come dimostra a tutt’oggi il bellissimo ma purtroppo limitato progetto Coreboot, un tempo chiamato linuxbios);

      § BIOS is a real closed-source program, not publicly documented, and it cannot be replaced by an opensource alternative (actually there is a really good but limited project Coreboot, some years ago it was known as linuxbios)

4) il BIOS spesso non è di fatto aggiornabile in ambiente diverso da Windows (perché in tempi recenti molti produttori hanno messo a disposizione programmi di aggiornamento solo per MS Windows; anche se un tentativo con FreeDOS in certi casi è possibile). Fare l’upgrade da GNU/Linux è al momento impossibile (tranne per i sistemi supportati dal progetto Coreboot, vedi sopra); inoltre, dato il suo ruolo critico nel sistema, a meno di avere un meccanismo di protezione (dual BIOS di alcune schede madri, chip BIOS di riserva, o dispositivi di tipo BIOS Savior che consentono una riprogrammazione serena), è assolutamente una pratica non alla portata di tutti;

      § BIOS is not always upgradeable in a operating system different from Windows (in fact recently several mainboard makers made available bios upgrade utilities only for MS Windows; nonetheless you maybe can try to use FreeDOS). At the moment you can’t absolutely perform a BIOS upgrade using GNU/Linux (except for Coreboot supported systems, see point 3); moreover, being such a critical program, you should have a protection tool (dual BIOS fro some mainboards, a spare BIOS chip, o devices like BIOS Savior, in order to guarantee a smoothly BIOS re-programming), as it is not for everybody.

5) Dopo qualche anno dall’uscita della scheda madre il produttore generalmente si disinteressa allo sviluppo di una versione aggiornata del BIOS, per cui l’utente si tiene il suo prodotto con tutti i bachi e le limitazioni;

      § After not so many years since market launch mainboard makers normally aren’t anymore interested in releasing updated versions of their BIOS, so user is abandoned with all his product’s defects.

6) le tabelle acpi del BIOS sono di solito compilate con un programma compilatore di Microsoft (contrassegnato dal codice ‘MSFT’), notoriamente troppo tollerante agli errori e poco restrittivo nel far rispettare le specifiche tecniche ACPI.

      § ACPI tables are usually built using a Microsoft compiler (identified by ‘MSFT’ code), who is too much tolerant and disrespectful towards ACPI technical specifications.

Alla luce di tutto ciò è assai probabile che il proprio fiammante computer non funzioni come deve (p.es. per la sospensione in ram o su disco, per il controllo delle ventole e della temperatura del processore, nonché per ogni altra questione di configurazione che dipende dal sottosistema ACPI).

      § So, as I said previously, it may happen you cannot use your new cool computer as you should (e.g. suspend-to-ram, suspend-to-disk, fan control, cpu temperature control, and any other configuration questions relating to ACPI subsystem)

In prima battuta, ove possibile, è consigliabile aggiornare il kernel almeno all’ultima versione stabile; è probabile infatti che gli sviluppatori del kernel e del sottosistema acpi abbiano già introdotto dei meccanismi per risolvere o aggirare questi problemi.

      First, you might want to upgrade your kernel to last stable version at least, if possible; maybe kernel and acpi subsystem developers has already made available fixes or workarounds for these problems

Prima di continuare la lettura, valgono come al solito le consuete condizioni d’uso.

      § Before continue, please read and accept following disclaimer: Beware! I am absolutely NOT responsible for any direct or indirect damage you might have following these instructions, this guide is made free and published as-is, without implied or explicit warranty of any kind.

In ragione del potenziale rischio insito nelle modifiche proposte consiglio di seguire questa guida solo a chi ha una buona conoscenza dell’argomento ed è in grado di far fronte ad eventuali bizzarrie del proprio sistema. E’ sempre buona norma avere un kernel di riserva (senza caricamento di una tabella DSDT modificata) da cui effettuare l’avvio nel caso in cui vi siano dei problemi.

      § As proposed modifications are potentially harmful, I advise you not to read this guide, unless you are somewhat clever on this topic and are prepared to face all problems it could cause. It is better to have a separate and spare kernel (without a custom DSDT table loaded-in) from which you can boot your system if problems should arise.

A tal fine presuppongo che l’utente conosca già:

      § Here are essential requirements you should already know:

1) che cosa rappresenta la tabella DSDT (Differentiated System Description Table);

      § what DSDT table consist of;

2) come si può creare su disco una copia della DSDT in uso;

      § how can you create a copy of DSDt on your disk;

es./ e.g.: cat /sys/firmware/acpi/tables/DSDT > DSDT.dat
3) come si disassembla la DSDT per avere un listato in formato AML;

      § how to disassemble DSDT to obtain an AML-format listing;

es./ e.g.: iasl -d DSDT.dat
4) come si ricompila la DSDT per ottenere il formato binario (.aml) o testuale (.hex) necessario;

      § how to re-compile DSDT to obtain binary (.aml) o textual (.hex) format;

es./ e.g.: iasl -ta DSDT.dsl o/or iasl -tc DSDT.dsl
5) come si ricompila il kernel per ricomprendere la tabella DSDT modificata, o come si ricomprende la tabella nel file initrd/initramfs.

      § how to re-compile kernel, including modified DSDT table, o to include your table in initrd/initramfs file.

Per capire meglio possono essere utili le specifiche tecniche ACPI ver. 3.0b di Intel Corporation sul sito ACPI, nonché il sito ACPI CA.

      § To better understand this topic you may read Intel ACPI technical specifications version 3.0b on this
      ACPI website; you can read also ACPI CA website

Ringrazio inoltre gli autori di guide e messaggi sui forum in rete che, anche se a spizzichi e a bocconi, mi hanno dato interessanti idee (essenzialmente tutti quelli in inglese ed in italiano che si ottengono con una ricerca su google dei termini “linux acpi dsdt”), in particolare:

      I owe a huge thanks to online guides and forums messages’ authors, who had given me somehow interesting ideas, such as:

Intel LessWatts (eng)
Gentoo how-to (eng)
Opensuse howto (eng)
ACPI How-to, the sequel (eng)
Guide debianizzati (ita)
Antenore blogspot (ita)

Passo ora in rassegna una serie di errori, avvertimenti e note che si possono incontrare laddove si voglia sostituire la tabella DSDT originale con una modificata (con il compilatore di Intel “iasl”)

      § Now I will examine a serie of errors, warnings and remarks whom you can find when you want replace original BIOS DSDT table with your own (modified and compiled with Intel compiler “iasl”)

—————————————————————————-
DSDT.dsl 349: Method (\_WAK, 1, NotSerialized)
Warning 1080 – ^ Reserved method must return a value (_WAK)
—————————————————————————-

Questo avvertimento è dovuto al fatto che il metodo \_WAK non restituisce un valore, contrariamente a quanto dovrebbe.
Il blocco relativo è strutturato, infatti, in questo modo:

      § This warning is caused by \_WAK method doesn’t return a value, while it should do it; the correlative chunk of code is:

Method (\_WAK, 1, NotSerialized)
{
[..] serie di istruzioni/some statements [..]
}

Soluzione: prima della chiusa parentesi graffa è necessario inserire un’istruzione di Return. Le fonti in rete sembrano concordi sul fatto che il valore corretto sia:

      § Hint: before “}” you must insert a Return statement. According to various online sources this value seems to be:

Return(Package(0x02){0x00, 0x00})

Pertanto il testo del metodo in questione, dopo la modifica sarà:

      § So method’s final text will become:

Method (\_WAK, 1, NotSerialized)
{
[..] serie di istruzioni/some statements [..]
Return(Package(0x02){0x00, 0x00})
}

—————————————————————————-
DSDT.dsl 2356: Name (_HID, “*pnp0c14″)
Error 4001 – String must be entirely alphanumeric ^ (*pnp0c14)
—————————————————————————-

Questo errore è dovuto al fatto che il valore in questione non può essere diverso da una lettera e/o da un numero, l’asterisco prima di pnp0c14 non è consentito e deve essere perciò rimosso.

      § This error is caused by a forbidden not alphabetic and/or numerical value, in this case “*”

Il blocco:

      § this chunk of code:

Name (_HID, "*pnp0c14")

dovrà diventare:

      § will become:

Name (_HID, "pnp0c14")

—————————————————————————-
DSDT.dsl 4382: Name (_T_0, 0×00)
Remark 5110 – Use of compiler reserved name ^ (_T_0)
—————————————————————————-

La tabella sta usando un nome che per il compilatore costituisce una parola riservata, come da specifiche ACPI (_T_x)
Le fonti sembrano concordare sul fatto che basti cambiare nome, semplicemente la rimozione del carattere “_” prima del nome.

      § This table is using a reserved word as name (it can’t be used as a name according to ACPI spec.). Following some online sources you can simply remove “_” before the name.

Il blocco

      § this chunk of code:

Name (_T_0, 0x00)

diventerà:

      § will become:

Name (T_0, 0x00)

—————————————————————————-
DSDT.dsl 576: And (CTRL, 0×0C)
Warning 1105 – ^ Result is not used, operator has no effect
—————————————————————————-

L’istruzione sembra mancare di un argomento. La sintassi dell’operatore And, secondo le specifiche ACPI 3.0b è la seguente:

      § This statement lacks of a parameter. In fact And operator’s syntax, according to ACPI spec. vers. 3.0b, is:

And(Source1, Source2, Result)

Mancando l’argomento Result, l’istruzione non fa alcunché. E’ necessario andare per logica: l’istruzione in teoria dovrebbe eseguire l’AND bit per bit tra due interi, pertanto e’ ragionevole ritenere che manchi come argomento quello della variabile CTRL, che rappresenterà il risultato.

      § Parameter Result is missing, so this statement is unuseful and unexecuted. Logically thinking, this statement teoretically should execute a bitwise AND between 2 integers, so we will consider CTRL parameter as missing: this parameter will be the Result

Il blocco

      § this chunk of code:

And (CTRL, 0x0C)

dovrà diventare:

      § will become:

And (CTRL, 0x0C, CTRL)

—————————————————————————-
DSDT.dsl 2370: Method (WMNV, 3, NotSerialized)
Warning 1087 – ^ Not all control paths return a value (WMNV)
—————————————————————————-

Questo avvertimento è dovuto al fatto che nel metodo in questione dovrebbe restituire un risultato ma non in tutte le condizioni ciò avviene.

      § This warning is caused by lack of return statements in some non-checked conditions

Esemplificando:

      § e.g.

Method (WMNV, 3, NotSerialized)
{
Store ("WMNV: ", Debug)
If (LGreaterEqual (SizeOf (Arg2), 0x08))
{
CreateDWordField (Arg2, 0x00, FUNC)
CreateDWordField (Arg2, 0x04, SUBF)
If (LGreater (SizeOf (Arg2), 0x08))
{
Subtract (SizeOf (Arg2), 0x08, Local2)
ShiftLeft (Local2, 0x03, Local2)
}
CreateField (Arg2, 0x40, Local2, ARGS)
Store (FUNC, Debug)
Store (SUBF, Debug)
Store (ARGS, Debug)
Return (\_SB.PCI0.IXVE.IGPU.NVIF (FUNC, SUBF, ARGS))
}
}

Come si può vedere, il metodo restituisce un valore (con Return) SOLO nel caso in cui la condizione proposta con il primo “if” sia vera, altrimenti il metodo non restituisce alcun valore.

      § As you can see, this method return a value ONLY if first-if condition is true, else nothing is returned.

Il problema serio è che sappiamo che ci va un altro return ma non sappiamo con che valore. Le specifiche non sono di aiuto e il valore di Debug non è esplicitato da nessuna parte, ma a buon senso possiamo ritenere che sia un valore superiore a 0 (di riflesso con Debug non utilizzato, il valore potrebbe essere 0)

      § It’s a serious problem, because we know we need another return to catch an unchecked condition, but we do not know which one. ACPI spec. are not useful in this matter; Debug value is not specified anywhere alse, but you can predict it is a value greater than 0 (so our value could be = 0)

Pertanto proviamo a inserire questa istruzione:

      § So we can insert this statement:

Return (\_SB.PCI0.IXVE.IGPU.NVIF (0, 0, 0))

Quindi il metodo in oggetto terminera’ cosi’:

      § This method finally ends as such:

Method (WMNV, 3, NotSerialized)
{
[..] serie di istruzioni [..]
Return (\_SB.PCI0.IXVE.IGPU.NVIF (0, 0, 0))
}

—————————————————————————-
DSDT.dsl 2613: }
Error 4095 – syntax error, unexpected ‘}’, expecting ‘(’ ^
—————————————————————————-
DSDT.dsl 2624: }
Error 4095 – syntax error, unexpected ‘}’, expecting ‘(’ ^
—————————————————————————-
DSDT.dsl 2635: }
Error 4095 – syntax error, unexpected ‘}’, expecting ‘(’ ^
—————————————————————————-
DSDT.dsl 11576: [*** iASL: Read error on source code temp file DSDT.src ***]
Error 4095 -^ syntax error, unexpected $end
—————————————————————————-

Questi errori sono tutti correlati; si tratta di una serie di variabili (ARGS, SARG e XARG) che non si capisce che cosa facciano e perché si trovino lì (specialmente dopo un Return)

      § These errors are reciprocally related: you have a number of variables (ARGS, SARG e XARG) whom you don’t understand what they do and why are they there (specially after a Return)

Prendiamo uno stralcio come esempio:

      § e.g.

[..]
CreateDWordField (Arg2, 0x04, ARGS)
If (LEqual (FUNC, 0x4D53445F))
{
If (LNotEqual (Arg1, 0x10))
{
Return (\_SB.PCI0.XVR0.DGPU._DSM)
ARGS
}
}
Else
{
If (LEqual (FUNC, 0x584D584D))
{
If (LGreaterEqual (SizeOf (Arg2), 0x08))
{
CreateDWordField (Arg2, 0x08, SARG)
Return (\_SB.PCI0.IXVE.IGPU.DDVI.MXMX)
SARG
}
}
Else
{
If (LEqual (FUNC, 0x5344584D))
{
If (LGreaterEqual (SizeOf (Arg2), 0x08))
{
CreateDWordField (Arg2, 0x08, XARG)
Return (\_SB.PCI0.IXVE.IGPU.CRT0.MXDS)
XARG
}
[..]

A prima vista si potrebbero ipotizzare due soluzioni al volo:
- potrebbero essere delle funzioni e vanno quindi indicate con le parentesi ovvero: ARGS () SARG () XARG ()
- oppure potrebbero essere “scivolate” dal return precedente e quindi andrebbero indicate come Return (testoblabla, ARGS) ecc..
In realta’ nessuna delle soluzioni funziona ed in diverso modo danno luogo a errori di sintassi

      § On the first hand you can think on 2 possible solutions:
      - they could be functions, so you should call them with “(” and “)”: ARGS () SARG () XARG ()
      - or, the could be “slipped” from previous Return, so they should be indicated as Return (sometext, ARGS) etc..
      But actually both of them DOES NOT work and they give some syntax-errors.

Non resta altro quindi che commentare i valori, cosi’:

      § So you will have to comment all values:

/* ARGS */
/* SARG */
/* XARG */

————————————————————————————————
DSDT.dsl 3649: Method (RNKP, 2, NotSerialized)
Warning 1087 – ^ Not all control paths return a value (RNKP)
————————————————————————————————
DSDT.dsl 4512: If (RNKP (0×00, Local1))
Warning 1092 – Called method may not always return a value ^
————————————————————————————————
DSDT.dsl 3790: Method (STAD, 2, NotSerialized)
Warning 1087 – ^ Not all control paths return a value (STAD)
————————————————————————————————
DSDT.dsl 4564: If (LOr (LLess (STAD (Local1, Local2), \_SB.PCI0.RR13), LEqual (\_SB.PCI0.RR10, Zero)))
Warning 1092 – Called method may not always return a value ^
————————————————————————————————
DSDT.dsl 4055: Method (PCS8, 1, NotSerialized)
Warning 1087 – ^ Not all control paths return a value (PCS8)
————————————————————————————————
DSDT.dsl 4791: Store (PCS8 (Local1), Local2)
Warning 1092 – Called method may not always return a value ^
————————————————————————————————
DSDT.dsl 4230: Method (CSE8, 1, NotSerialized)
Warning 1087 – ^ Not all control paths return a value (CSE8)
————————————————————————————————
DSDT.dsl 4783: If (CSE8 (Local1))
Warning 1092 – ^ Called method may not always return a value
————————————————————————————————
DSDT.dsl 4294: Method (BAL8, 1, NotSerialized)
Warning 1087 – ^ Not all control paths return a value (BAL8)
————————————————————————————————
DSDT.dsl 4786: If (LAnd (\_SB.PCI0.K802.MEMW, BAL8 (Local1)))
Warning 1092 – Called method may not always return a value ^
————————————————————————————————

Il secondo di ciascuna di queste coppie di errori è diretta conseguenza del primo di ognuna. Come detto più sopra in presenza di alcune condizioni il metodo non restituisce un valore, come invece dovrebbe.
Tenuto conto che il metodo non è documentato nelle specifiche ACPI e vi sono una serie di condizioni in presenza delle quali si restituisce un valore correlato a \_SB.PCI0.K802.RRxx oppure a \_SB.PCI0.RRxx (dove xx è un numero che varia), anch’essi non documentati, appare ragionevole restituire uno zero, con:

      § For every couple of warning, the second one depends on the first one. As I said before, giving some conditions this method does not return a value
      This method is not documented in ACPI spec. and we have some conditions for which this one returns a value referring to \_SB.PCI0.K802.RRxx or \_SB.PCI0.RRxx (where xx is the changing part), both undocumented, we could return a Zero value:

Return (0x00)

Perciò all’interno del metodo, alla fine di questo e prima dell’ultima chiusa parentesi graffa andrà indicato questo:

      § So in this method, immediately before “}”, we will insert this Return:

Method (RNKP, 2, NotSerialized)
{
[..] serie_di_istruzioni/some statements [..]
Return (0x00)
}

Il tutto ripetuto per tutti i metodi che hanno questo problema.

      § This statement has to be inserted in every similar problematic method.

—————————————————————————————————-
DSDT.dsl 237: Store (Local0, Local0)
Error 4050 – ^ Method local variable is not initialized (Local0)
—————————————————————————————————-
DSDT.dsl 242: Store (Local0, Local0)
Error 4050 – ^ Method local variable is not initialized (Local0)
—————————————————————————————————-

Questo errore appare mentre si ricompila la tabella DSDT. l’istruzione memorizza la variabile in se stessa: molto utile senza dubbio! ;-)

      § This error appears when you re-compile DSDT table. This statement store a variable in itself: really useful, guys! ;-) 

Dato un blocco come il seguente:

      § Having this chunk of code:

Scope (\_SI)
{
Method (_MSG, 1, NotSerialized)
{
Store (Local0, Local0)
}

Method (_SST, 1, NotSerialized)
{
Store (Local0, Local0)
If (LEqual (Arg0, 0x03)) {}
If (LEqual (Arg0, 0x01)) {}
}
}

La soluzione è rimuovere o commentare le due istruzioni incriminate. Il blocco precedente diventerà quindi:

      § Solution: you will have to remove or comment related statements. Previous chunk of code will become:

Scope (\_SI)
{
Method (_MSG, 1, NotSerialized)
{
/* Store (Local0, Local0) */
}

Method (_SST, 1, NotSerialized)
{
/* Store (Local0, Local0) */
If (LEqual (Arg0, 0x03)) {}
If (LEqual (Arg0, 0x01)) {}
}
}

—————————————————————————————————-
ACPI Warning (nspredef-0940): \_TZ_.THRM._PSL: Return Package type mismatch at index 0 – found [NULL Object Descriptor], expected Reference [20081204]
ACPI: Expecting a [Reference] package element, found type 0
ACPI: Invalid passive threshold
—————————————————————————————————-

Questo è un avvertimento che appare nel file /var/log/dmesg e all’avvio del sistema operativo (a differenza dei precedenti che invece sono relativi alla ricompilazione della tabella DSDT originale).

      § This is a warning you can see in /var/log/dmesg while booting the o.s. (previous ones relate to DSDT re-compilation, instead) 

Il messaggio è molto criptico e non facilmente intelleggibile da un comune utente. Ricercando in rete ho trovato un riferimento ad una segnalazione di bug su bugzilla.kernel.org, a cui sono arrivato tramite linuxquestions.org

      § Indeed this is a cryptic and not an easy to understand message. Searching online, I’ve found a filed bug on bugzilla.kernel.org, from a forum post on linuxquestions.org

Le righe che ci interessano, estrapolate dal listato della tabella DSDT, sono le seguenti:

      § Taken from DSDT table listing, we can see interesting lines, such as:

External (\_PR_.CPU0)
[..] serie di istruzioni/some statements [..]
Scope (\_PR)
{
Processor (\_PR.C000, 0x00, 0x00000000, 0x00) {}
Processor (\_PR.C001, 0x01, 0x00000000, 0x00) {}
Processor (\_PR.C002, 0x02, 0x00000000, 0x00) {}
Processor (\_PR.C003, 0x03, 0x00000000, 0x00) {}
}
[..] serie di istruzioni/some statements [..]
Name (_PSL, Package (0x01)
{
\_PR.CPU0
})

Il problema sta nel fatto che il dispositivo \_PR.CPU0 (che è dichiarato come esistente all’esterno della tabella DSDT) non esiste: il processore in realtà è identificato come \_PR.C00x (dove x è il numero progressivo del processore, partendo dallo 0, in questo caso sono 4 quelli supportati).
P.S. Faccio notare che questo riguarda la tabella DSDT in esame (il dispositivo \_PR.CPU0 può esistere benissimo in altri BIOS, quindi, ove non sia alcun errore, NON modificatelo)

      § The problem is simple: \_PR.CPU0 device doesn’t exist (even if it is declared to be existent as External): the CPU is identified as \_PR.C00x (where x is the incremental CPU number, starting from 0, in this case we have 4 supported CPUs)
      P.S. Please notice: this one concerns ONLY this DSDT table (\_PR.CPU0 device can be really existent in another BIOS or mainboard, so you MUST NOT modify it if you have not any similar errors)

La riga

      § this line:

External (\_PR_.CPU0)

può essere commentata:

      § can be commented:

/* External (\_PR_.CPU0) */

il blocco

      § this chunk of code:

Name (_PSL, Package (0x01)
{
\_PR.CPU0
})

invece diventerà:

      § will become:

Name (_PSL, Package (0x04)
{
\_PR.C000,
\_PR.C001,
\_PR.C002,
\_PR.C003
})
ma comincia veramente a diventare complicata sta cosa.... voi ci capite qualche cosa? intanto disattivo il cool and quiet
nessuno sa dov è il villaggio degli gnome ?
paoloci
Rampante Reduce
Rampante Reduce
Messaggi: 7507
Iscrizione: mercoledì 28 maggio 2008, 12:08

Re: problema bios scheda madre

Messaggio da paoloci »

matley cool and quiet disabilitalo solo per il tempo necessario per mandare un nuovo dmesg

Solo per vedere la variazione
poi rimandi subito dmesg
paoloci
Rampante Reduce
Rampante Reduce
Messaggi: 7507
Iscrizione: mercoledì 28 maggio 2008, 12:08

Re: problema bios scheda madre

Messaggio da paoloci »

matley il problema sul conflitto è sul PCI Bridge MCP55
resource map sanity check conflict: 0xff000000 0xffffffff 0xfff80000 0xfff80fff pnp 00:0e

00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)

vediamo se con coll and quiet disabilitato, se il clock va a posto, il problema termina
quando hai disabilitato manda dmesg
Avatar utente
matley81
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 601
Iscrizione: martedì 18 settembre 2007, 10:27

Re: problema bios scheda madre

Messaggio da matley81 »

ecco il risultato di dsmeg con cool and quiet disabilitato

Codice: Seleziona tutto

bled.
[    0.405913] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.406063] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.406213] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[    0.406365] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 *11 14 15)
[    0.406514] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[    0.406662] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.406811] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.406960] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.407109] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.407259] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
[    0.407408] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
[    0.407558] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
[    0.407738] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[    0.407914] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[    0.408104] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.408280] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[    0.408456] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
[    0.408632] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[    0.408810] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[    0.408987] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[    0.409163] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[    0.409340] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[    0.409516] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
[    0.409693] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[    0.409869] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[    0.410045] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[    0.410222] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[    0.410399] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[    0.410576] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.410753] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.410930] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[    0.411106] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
[    0.411214] ACPI: WMI: Mapper loaded
[    0.411260] SCSI subsystem initialized
[    0.411260] libata version 3.00 loaded.
[    0.411260] usbcore: registered new interface driver usbfs
[    0.411260] usbcore: registered new interface driver hub
[    0.411260] usbcore: registered new device driver usb
[    0.411260] PCI: Using ACPI for IRQ routing
[    0.420031] Bluetooth: Core ver 2.13
[    0.420058] NET: Registered protocol family 31
[    0.420058] Bluetooth: HCI device and connection manager initialized
[    0.420058] Bluetooth: HCI socket layer initialized
[    0.420058] NET: Registered protocol family 8
[    0.420058] NET: Registered protocol family 20
[    0.420058] NetLabel: Initializing
[    0.420058] NetLabel:  domain hash size = 128
[    0.420058] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.420058] NetLabel:  unlabeled traffic allowed by default
[    0.420191] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[    0.420194] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.428072] AppArmor: AppArmor Filesystem Enabled
[    0.432026] Switched to high resolution mode on CPU 0
[    0.432035] Switched to high resolution mode on CPU 1
[    0.440055] pnp: PnP ACPI init
[    0.440072] ACPI: bus type pnp registered
[    0.444327] pnp: PnP ACPI: found 15 devices
[    0.444328] ACPI: ACPI bus type pnp unregistered
[    0.444335] system 00:01: ioport range 0x1000-0x107f has been reserved
[    0.444337] system 00:01: ioport range 0x1080-0x10ff has been reserved
[    0.444338] system 00:01: ioport range 0x1400-0x147f has been reserved
[    0.444340] system 00:01: ioport range 0x1480-0x14ff has been reserved
[    0.444341] system 00:01: ioport range 0x1800-0x187f has been reserved
[    0.444343] system 00:01: ioport range 0x1880-0x18ff has been reserved
[    0.444346] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    0.444348] system 00:02: ioport range 0x800-0x87f has been reserved
[    0.444350] system 00:02: ioport range 0x290-0x297 has been reserved
[    0.444354] system 00:0d: iomem range 0xf0000000-0xf3ffffff has been reserved
[    0.444358] system 00:0e: iomem range 0xcca00-0xcffff has been reserved
[    0.444359] system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
[    0.444361] system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
[    0.444362] system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
[    0.444364] system 00:0e: iomem range 0xfefff000-0xfefff0ff has been reserved
[    0.444366] system 00:0e: iomem range 0x7fee0000-0x7fefffff could not be reserved
[    0.444367] system 00:0e: iomem range 0xffff0000-0xffffffff has been reserved
[    0.444369] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[    0.444371] system 00:0e: iomem range 0x100000-0x7fedffff could not be reserved
[    0.444372] system 00:0e: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.444374] system 00:0e: iomem range 0xfee00000-0xfeefffff has been reserved
[    0.444376] system 00:0e: iomem range 0xfefff000-0xfeffffff could not be reserved
[    0.444378] system 00:0e: iomem range 0xfff80000-0xfff80fff has been reserved
[    0.444380] system 00:0e: iomem range 0xfff90000-0xfffbffff has been reserved
[    0.444381] system 00:0e: iomem range 0xfffed000-0xfffeffff has been reserved
[    0.449005] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[    0.449006] pci 0000:00:04.0:   IO window: 0xd000-0xdfff
[    0.449009] pci 0000:00:04.0:   MEM window: 0xf8000000-0xfbffffff
[    0.449011] pci 0000:00:04.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
[    0.449013] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02
[    0.449014] pci 0000:00:0e.0:   IO window: disabled
[    0.449016] pci 0000:00:0e.0:   MEM window: 0xfdf00000-0xfdffffff
[    0.449018] pci 0000:00:0e.0:   PREFETCH window: disabled
[    0.449021] pci 0000:00:16.0: PCI bridge, secondary bus 0000:03
[    0.449022] pci 0000:00:16.0:   IO window: 0xc000-0xcfff
[    0.449025] pci 0000:00:16.0:   MEM window: 0xfde00000-0xfdefffff
[    0.449026] pci 0000:00:16.0:   PREFETCH window: disabled
[    0.449033] pci 0000:00:04.0: setting latency timer to 64
[    0.449036] pci 0000:00:0e.0: setting latency timer to 64
[    0.449039] pci 0000:00:16.0: setting latency timer to 64
[    0.449041] bus: 00 index 0 io port: [0x00-0xffff]
[    0.449043] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[    0.449044] bus: 01 index 0 io port: [0xd000-0xdfff]
[    0.449045] bus: 01 index 1 mmio: [0xf8000000-0xfbffffff]
[    0.449047] bus: 01 index 2 mmio: [0xe0000000-0xefffffff]
[    0.449048] bus: 01 index 3 mmio: [0x0-0x0]
[    0.449049] bus: 02 index 0 mmio: [0x0-0x0]
[    0.449050] bus: 02 index 1 mmio: [0xfdf00000-0xfdffffff]
[    0.449051] bus: 02 index 2 mmio: [0x0-0x0]
[    0.449052] bus: 02 index 3 io port: [0x00-0xffff]
[    0.449053] bus: 02 index 4 mmio: [0x000000-0xffffffffffffffff]
[    0.449055] bus: 03 index 0 io port: [0xc000-0xcfff]
[    0.449056] bus: 03 index 1 mmio: [0xfde00000-0xfdefffff]
[    0.449057] bus: 03 index 2 mmio: [0x0-0x0]
[    0.449058] bus: 03 index 3 mmio: [0x0-0x0]
[    0.449067] NET: Registered protocol family 2
[    0.484101] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.484359] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.485642] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.486048] TCP: Hash tables configured (established 262144 bind 65536)
[    0.486049] TCP reno registered
[    0.496122] NET: Registered protocol family 1
[    0.496201] checking if image is initramfs... it is
[    0.883962] Freeing initrd memory: 7757k freed
[    0.887322] audit: initializing netlink socket (disabled)
[    0.887336] type=2000 audit(1244539896.884:1): initialized
[    0.892726] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.893527] VFS: Disk quotas dquot_6.5.1
[    0.893561] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.893948] fuse init (API version 7.10)
[    0.893996] msgmni has been set to 3971
[    0.894140] alg: No test for stdrng (krng)
[    0.894151] io scheduler noop registered
[    0.894152] io scheduler anticipatory registered
[    0.894153] io scheduler deadline registered
[    0.894181] io scheduler cfq registered (default)
[    0.894190] pci 0000:00:00.0: Enabling HT MSI Mapping
[    0.894216] pci 0000:00:04.0: Enabling HT MSI Mapping
[    0.908793] pci 0000:00:0d.0: Enabling HT MSI Mapping
[    0.908801] pci 0000:00:0d.1: Enabling HT MSI Mapping
[    0.908808] pci 0000:00:0d.2: Enabling HT MSI Mapping
[    0.908815] pci 0000:00:0e.0: Enabling HT MSI Mapping
[    0.908823] pci 0000:00:0e.1: Enabling HT MSI Mapping
[    0.908833] pci 0000:00:10.0: Enabling HT MSI Mapping
[    0.908842] pci 0000:00:11.0: Enabling HT MSI Mapping
[    0.908850] pci 0000:00:16.0: Enabling HT MSI Mapping
[    0.908862] pci 0000:01:00.0: Boot video device
[    0.914345] pcieport-driver 0000:00:04.0: setting latency timer to 64
[    0.914361] pcieport-driver 0000:00:04.0: found MSI capability
[    0.914372] pcieport-driver 0000:00:04.0: irq 2303 for MSI/MSI-X
[    0.914377] pci_express 0000:00:04.0:pcie00: allocate port service
[    0.914385] pci_express 0000:00:04.0:pcie03: allocate port service
[    0.914410] pcieport-driver 0000:00:16.0: setting latency timer to 64
[    0.914431] pcieport-driver 0000:00:16.0: found MSI capability
[    0.914442] pcieport-driver 0000:00:16.0: irq 2302 for MSI/MSI-X
[    0.914448] pci_express 0000:00:16.0:pcie00: allocate port service
[    0.914455] pci_express 0000:00:16.0:pcie03: allocate port service
[    0.914489] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.914494] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.914590] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.914592] ACPI: Power Button (FF) [PWRF]
[    0.914618] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.914620] ACPI: Power Button (CM) [PWRB]
[    0.914658] fan PNP0C0B:00: registered as cooling_device0
[    0.914661] ACPI: Fan [FAN] (on)
[    0.914894] ACPI: processor limited to max C-state 1
[    0.914904] processor ACPI_CPU:00: registered as cooling_device1
[    0.914925] processor ACPI_CPU:01: registered as cooling_device2
[    0.919008] ACPI Warning (nspredef-0858): \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference [20080926]
[    0.919013] ACPI: Expecting a [Reference] package element, found type 0
[    0.919270] thermal LNXTHERM:01: registered as thermal_zone0
[    0.919643] ACPI: Thermal Zone [THRM] (40 C)
[    0.944855] Linux agpgart interface v0.103
[    0.944861] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    0.944945] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.945150] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.945627] brd: module loaded
[    0.945821] loop: module loaded
[    0.945865] Fixed MDIO Bus: probed
[    0.945869] PPP generic driver version 2.4.2
[    0.945904] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.945921] Driver 'sd' needs updating - please use bus_type methods
[    0.945926] Driver 'sr' needs updating - please use bus_type methods
[    0.946009] sata_sil24 0000:03:00.0: version 1.1
[    0.946285] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[    0.946293] sata_sil24 0000:03:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[    0.946352] sata_sil24 0000:03:00.0: setting latency timer to 64
[    0.946555] scsi0 : sata_sil24
[    0.946641] scsi1 : sata_sil24
[    0.946664] ata1: SATA max UDMA/100 host m128@0xfdeff000 port 0xfdef8000 irq 16
[    0.946667] ata2: SATA max UDMA/100 host m128@0xfdeff000 port 0xfdefa000 irq 16
[    3.024228] ata1: SATA link down (SStatus 0 SControl 0)
[    5.104227] ata2: SATA link down (SStatus 0 SControl 0)
[    5.104273] sata_nv 0000:00:0d.0: version 3.5
[    5.104539] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[    5.104545] sata_nv 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    5.104546] sata_nv 0000:00:0d.0: Using SWNCQ mode
[    5.104804] sata_nv 0000:00:0d.0: setting latency timer to 64
[    5.104938] scsi2 : sata_nv
[    5.104987] scsi3 : sata_nv
[    5.105099] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf800 irq 23
[    5.105101] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf808 irq 23
[    5.838601] ata3: SATA link down (SStatus 0 SControl 300)
[    6.716327] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    6.761042] ata4.00: ATA-7: MAXTOR STM3160215AS, 3.AAD, max UDMA/133
[    6.761043] ata4.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    6.827681] ata4.00: configured for UDMA/133
[    6.827702] isa bounce pool size: 16 pages
[    6.827760] scsi 3:0:0:0: Direct-Access     ATA      MAXTOR STM316021 3.AA PQ: 0 ANSI: 5
[    6.827820] sd 3:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[    6.827831] sd 3:0:0:0: [sda] Write Protect is off
[    6.827833] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.827848] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.827897] sd 3:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[    6.827905] sd 3:0:0:0: [sda] Write Protect is off
[    6.827906] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.827920] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.827922]  sda: sda1 sda2 < sda5 sda6 >
[    6.895313] sd 3:0:0:0: [sda] Attached SCSI disk
[    6.895347] sd 3:0:0:0: Attached scsi generic sg0 type 0
[    6.895615] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[    6.895623] sata_nv 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[    6.895624] sata_nv 0000:00:0d.1: Using SWNCQ mode
[    6.895882] sata_nv 0000:00:0d.1: setting latency timer to 64
[    6.896044] scsi4 : sata_nv
[    6.896101] scsi5 : sata_nv
[    6.896214] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf300 irq 22
[    6.896216] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf308 irq 22
[    7.630507] ata5: SATA link down (SStatus 0 SControl 300)
[    8.508236] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    8.516338] ata6.00: ATAPI: ASUS    DRW-2014L1T, 1.00, max UDMA/66
[    8.532345] ata6.00: configured for UDMA/66
[    8.533583] scsi 5:0:0:0: CD-ROM            ASUS     DRW-2014L1T      1.00 PQ: 0 ANSI: 5
[    8.538034] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    8.538036] Uniform CD-ROM driver Revision: 3.20
[    8.538097] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    8.538118] sr 5:0:0:0: Attached scsi generic sg1 type 5
[    8.538380] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
[    8.538386] sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
[    8.538388] sata_nv 0000:00:0d.2: Using SWNCQ mode
[    8.538643] sata_nv 0000:00:0d.2: setting latency timer to 64
[    8.538796] scsi6 : sata_nv
[    8.538868] scsi7 : sata_nv
[    8.538978] ata7: SATA max UDMA/133 cmd 0xf200 ctl 0xf100 bmdma 0xee00 irq 21
[    8.538980] ata8: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xee08 irq 21
[    9.270507] ata7: SATA link down (SStatus 0 SControl 300)
[   10.002514] ata8: SATA link down (SStatus 0 SControl 300)
[   10.002576] pata_amd 0000:00:0c.0: version 0.3.10
[   10.002598] pata_amd 0000:00:0c.0: setting latency timer to 64
[   10.002686] scsi8 : pata_amd
[   10.002738] scsi9 : pata_amd
[   10.003134] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfd00 irq 14
[   10.003136] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfd08 irq 15
[   10.167199] ata10: port disabled. ignoring.
[   10.167490] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   10.167749] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[   10.167756] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20
[   10.167762] ehci_hcd 0000:00:0a.1: setting latency timer to 64
[   10.167764] ehci_hcd 0000:00:0a.1: EHCI Host Controller
[   10.167803] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
[   10.167825] ehci_hcd 0000:00:0a.1: debug port 1
[   10.167828] ehci_hcd 0000:00:0a.1: cache line size of 64 is not supported
[   10.167841] ehci_hcd 0000:00:0a.1: irq 20, io mem 0xfe02e000
[   10.176217] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00
[   10.176262] usb usb1: configuration #1 chosen from 1 choice
[   10.176280] hub 1-0:1.0: USB hub found
[   10.176285] hub 1-0:1.0: 10 ports detected
[   10.176351] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   10.176617] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[   10.176619] ohci_hcd 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[   10.176625] ohci_hcd 0000:00:0a.0: setting latency timer to 64
[   10.176626] ohci_hcd 0000:00:0a.0: OHCI Host Controller
[   10.176651] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2
[   10.176660] ohci_hcd 0000:00:0a.0: irq 23, io mem 0xfe02f000
[   10.234232] usb usb2: configuration #1 chosen from 1 choice
[   10.234246] hub 2-0:1.0: USB hub found
[   10.234252] hub 2-0:1.0: 10 ports detected
[   10.234311] uhci_hcd: USB Universal Host Controller Interface driver
[   10.234361] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   10.234670] serio: i8042 KBD port at 0x60,0x64 irq 1
[   10.234673] serio: i8042 AUX port at 0x60,0x64 irq 12
[   10.244732] mice: PS/2 mouse device common for all mice
[   10.280751] rtc_cmos 00:05: RTC can wake from S4
[   10.280778] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[   10.280810] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[   10.280846] device-mapper: uevent: version 1.0.3
[   10.280952] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[   10.281100] device-mapper: multipath: version 1.0.5 loaded
[   10.281102] device-mapper: multipath round-robin: version 1.0.0 loaded
[   10.281267] cpuidle: using governor ladder
[   10.281268] cpuidle: using governor menu
[   10.281559] TCP cubic registered
[   10.281605] NET: Registered protocol family 10
[   10.281871] lo: Disabled Privacy Extensions
[   10.282052] NET: Registered protocol family 17
[   10.282064] Bluetooth: L2CAP ver 2.11
[   10.282065] Bluetooth: L2CAP socket layer initialized
[   10.282066] Bluetooth: SCO (Voice Link) ver 0.6
[   10.282067] Bluetooth: SCO socket layer initialized
[   10.282110] Bluetooth: RFCOMM socket layer initialized
[   10.282114] Bluetooth: RFCOMM TTY layer initialized
[   10.282115] Bluetooth: RFCOMM ver 1.10
[   10.282153] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
[   10.282173] [Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor.
[   10.282344] [Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor.
[   10.282552] registered taskstats version 1
[   10.282670]   Magic number: 13:106:525
[   10.282746] rtc_cmos 00:05: setting system clock to 2009-06-09 09:31:47 UTC (1244539907)
[   10.282748] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   10.282749] EDD information not available.
[   10.282776] Freeing unused kernel memory: 532k freed
[   10.282969] Write protecting the kernel read-only data: 6684k
[   10.302746] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[   10.466995] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[   10.467318] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[   10.467321] forcedeth 0000:00:10.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
[   10.467325] forcedeth 0000:00:10.0: setting latency timer to 64
[   10.467363] nv_probe: set workaround bit for reversed mac addr
[   10.484420] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[   10.484425] ohci1394 0000:02:0b.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[   10.534119] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[fdfff000-fdfff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   10.548514] usb 1-9: new high speed USB device using ehci_hcd and address 3
[   10.563665] Floppy drive(s): fd0 is 1.44M
[   10.579930] FDC 0 is a post-1991 82077
[   10.687302] usb 1-9: configuration #1 chosen from 1 choice
[   10.985106] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:91:09:1c
[   10.985109] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[   10.985483] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
[   10.985486] forcedeth 0000:00:11.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21
[   10.985507] forcedeth 0000:00:11.0: setting latency timer to 64
[   10.985582] nv_probe: set workaround bit for reversed mac addr
[   11.008048] usb 2-6: new low speed USB device using ohci_hcd and address 2
[   11.226328] usb 2-6: configuration #1 chosen from 1 choice
[   11.233799] usbcore: registered new interface driver hiddev
[   11.240506] input: Weltrend Bar Code Reader as /devices/pci0000:00/0000:00:0a.0/usb2/2-6/2-6:1.0/input/input4
[   11.268171] generic-usb 0003:040B:6510.0001: input,hidraw0: USB HID v1.10 Keyboard [Weltrend Bar Code Reader] on usb-0000:00:0a.0-6/input0
[   11.268185] usbcore: registered new interface driver usbhid
[   11.268188] usbhid: v2.6:USB HID core driver
[   11.504962] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:91:11:c1
[   11.504965] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[   11.767993] PM: Starting manual resume from disk
[   11.767995] PM: Resume from partition 8:5
[   11.767996] PM: Checking hibernation image.
[   11.768322] PM: Resume from disk failed.
[   11.795730] EXT4-fs: barriers enabled
[   11.806554] kjournald2 starting.  Commit interval 5 seconds
[   11.806565] EXT4-fs: delayed allocation enabled
[   11.806566] EXT4-fs: file extents enabled
[   11.811932] EXT4-fs: mballoc enabled
[   11.811935] EXT4-fs: mounted filesystem with ordered data mode.
[   11.816161] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80000eca1c4]
[   16.394861] udev: starting version 141
[   17.841477] nvidia: module license 'NVIDIA' taints kernel.
[   17.872424] ACPI: I/O resource nForce2_smbus [0x1c00-0x1c3f] conflicts with ACPI region SM00 [0x1c00-0x1c05]
[   17.872427] ACPI: Device needs an ACPI driver
[   17.872473] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[   17.872498] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[   17.899781] parport_pc 00:0a: reported by Plug and Play ACPI
[   17.899806] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   17.944871] ppdev: user-space parallel port driver
[   17.992675] ck804xrom ck804xrom_init_one(): Unable to register resource 0x00000000ff000000-0x00000000ffffffff - kernel bug?
[   17.992684] resource map sanity check conflict: 0xff000000 0xffffffff 0xfff80000 0xfff80fff pnp 00:0e
[   17.992689] ------------[ cut here ]------------
[   17.992691] WARNING: at /build/buildd/linux-2.6.28/arch/x86/mm/ioremap.c:226 __ioremap_caller+0x349/0x390()
[   17.992693] Modules linked in: ck804xrom(+) mtd chipreg map_funcs ppdev cfg80211(+) parport_pc(+) parport i2c_nforce2 nvidia(P+) usbhid floppy ohci1394 ieee1394 forcedeth fbcon tileblit font bitblit softcursor
[   17.992702] Pid: 981, comm: modprobe Tainted: P           2.6.28-12-generic #43-Ubuntu
[   17.992704] Call Trace:
[   17.992708]  [<ffffffff802509bf>] warn_on_slowpath+0x5f/0x90
[   17.992711]  [<ffffffff8022f669>] ? default_spin_lock_flags+0x9/0x10
[   17.992713]  [<ffffffff8022f669>] ? default_spin_lock_flags+0x9/0x10
[   17.992715]  [<ffffffff80236c29>] __ioremap_caller+0x349/0x390
[   17.992718]  [<ffffffffa08aa2db>] ? ck804xrom_init_one+0x1ab/0x5ca [ck804xrom]
[   17.992720]  [<ffffffff80236d82>] ioremap_nocache+0x12/0x20
[   17.992723]  [<ffffffffa08aa2db>] ck804xrom_init_one+0x1ab/0x5ca [ck804xrom]
[   17.992725]  [<ffffffffa08b0041>] init_ck804xrom+0x41/0x59 [ck804xrom]
[   17.992728]  [<ffffffffa08b0000>] ? init_ck804xrom+0x0/0x59 [ck804xrom]
[   17.992730]  [<ffffffff8020a03b>] do_one_initcall+0x3b/0x170
[   17.992733]  [<ffffffff802424b2>] ? enqueue_entity+0x122/0x2b0
[   17.992735]  [<ffffffff802486cd>] ? enqueue_task_fair+0x3d/0x80
[   17.992737]  [<ffffffff8023e2a9>] ? wakeup_preempt_entity+0x59/0x60
[   17.992739]  [<ffffffff80249330>] ? check_preempt_wakeup+0x210/0x230
[   17.992741]  [<ffffffff8024a3cc>] ? try_to_wake_up+0x12c/0x2e0
[   17.992744]  [<ffffffff8027ef9d>] sys_init_module+0xad/0x1e0
[   17.992746]  [<ffffffff8021253a>] system_call_fastpath+0x16/0x1b
[   17.992748] ---[ end trace f41e4ab1bcfe2027 ]---
[   18.009172] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   18.104904] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[   18.104909] nvidia 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[   18.104918] nvidia 0000:01:00.0: setting latency timer to 64
[   18.105919] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  180.44  Tue Mar 24 05:46:32 PST 2009
[   18.128457] cfg80211: Calling CRDA to update world regulatory domain
[   18.212614] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[   18.285565] cfg80211: World regulatory domain updated:
[   18.285568] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.285570] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.285572] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.285573] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.285574] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.285576] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.533911] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[   18.533915] HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[   18.534055] HDA Intel 0000:00:0e.1: setting latency timer to 64
[   18.705300] phy0: Selected rate control algorithm 'pid'
[   18.771013] phy0: hwaddr 00:15:af:08:cd:5b, RTL8187vB (default) V1 + rtl8225z2
[   18.771034] usbcore: registered new interface driver rtl8187
[   18.934687] input: PS2++ Logitech MX Mouse as /devices/platform/i8042/serio1/input/input6
[   19.375373] lp0: using parport0 (interrupt-driven).
[   19.400252] it87: Found IT8716F chip at 0x290, revision 1
[   19.400260] it87: in3 is VCC (+5V)
[   19.400261] it87: in7 is VCCH (+5V Stand-By)
[   19.652834] Adding 6040400k swap on /dev/sda5.  Priority:-1 extents:1 across:6040400k
[   20.181558] EXT4 FS on sda6, internal journal on sda6:8
[   20.955889] EXT4-fs: barriers enabled
[   20.973533] kjournald2 starting.  Commit interval 5 seconds
[   20.974147] EXT4 FS on sda1, internal journal on sda1:8
[   20.974149] EXT4-fs: delayed allocation enabled
[   20.974150] EXT4-fs: file extents enabled
[   20.983562] EXT4-fs: mballoc enabled
[   20.983565] EXT4-fs: mounted filesystem with ordered data mode.
[   21.205744] type=1505 audit(1244539918.421:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2181
[   21.235841] type=1505 audit(1244539918.449:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2185
[   21.235938] type=1505 audit(1244539918.449:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2185
[   21.235970] type=1505 audit(1244539918.449:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2185
[   21.236006] type=1505 audit(1244539918.449:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2185
[   21.321972] type=1505 audit(1244539918.537:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2190
[   21.322114] type=1505 audit(1244539918.537:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2190
[   21.341917] type=1505 audit(1244539918.557:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2194
[   30.761747] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   30.761750] Bluetooth: BNEP filters: protocol multicast
[   30.813393] Bridge firewalling registered
[   35.783285] forcedeth 0000:00:11.0: irq 2301 for MSI/MSI-X
[   35.783495] eth1: no link during initialization.
[   35.784081] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   35.785162] forcedeth 0000:00:10.0: irq 2300 for MSI/MSI-X
[   44.816129] ADDRCONF(NETDEV_UP): wlan0: link is not ready
latelierlab@latelierlab-desktop:~$ 
nessuno sa dov è il villaggio degli gnome ?
Avatar utente
matley81
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 601
Iscrizione: martedì 18 settembre 2007, 10:27

Re: problema bios scheda madre

Messaggio da matley81 »

disbilitando il cool and quiet la ventola va alla velocità della luce.... :'(
nessuno sa dov è il villaggio degli gnome ?
Avatar utente
matley81
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 601
Iscrizione: martedì 18 settembre 2007, 10:27

Re: problema bios scheda madre

Messaggio da matley81 »

ecco le temperature disabilitando il cool and quiet

Codice: Seleziona tutto

latelierlab@latelierlab-desktop:~$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:       +40.0°C  (crit = +75.0°C)                  

k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:  +62.0°C                                    
Core1 Temp:  +64.0°C                                    

it8716-isa-0290
Adapter: ISA adapter
VCore:       +1.44 V  (min =  +0.00 V, max =  +4.08 V)   
VDDR:        +0.00 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
+3.3V:       +3.33 V  (min =  +0.00 V, max =  +4.08 V)   
+5V:         +4.87 V  (min =  +0.00 V, max =  +6.85 V)   
+12V:       +12.03 V  (min =  +0.00 V, max = +16.32 V)   
in5:         +3.62 V  (min =  +0.00 V, max =  +4.08 V)   
in6:         +0.00 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
5VSB:        +4.73 V  (min =  +0.00 V, max =  +6.85 V)   
VBat:        +3.10 V
fan1:       5578 RPM  (min =    0 RPM)
fan2:          0 RPM  (min =    0 RPM)
fan3:          0 RPM  (min =    0 RPM)
temp1:       +62.0°C  (low  =  -1.0°C, high = +127.0°C)  sensor = thermal diode
temp2:       +49.0°C  (low  =  -1.0°C, high = +127.0°C)  sensor = thermistor
temp3:       +89.0°C  (low  =  -1.0°C, high = +127.0°C)  sensor = thermistor
cpu0_vid:   +0.763 V

latelierlab@latelierlab-desktop:~$ 
nessuno sa dov è il villaggio degli gnome ?
paoloci
Rampante Reduce
Rampante Reduce
Messaggi: 7507
Iscrizione: mercoledì 28 maggio 2008, 12:08

Re: problema bios scheda madre

Messaggio da paoloci »

d'accordo riabilita subito
paoloci
Rampante Reduce
Rampante Reduce
Messaggi: 7507
Iscrizione: mercoledì 28 maggio 2008, 12:08

Re: problema bios scheda madre

Messaggio da paoloci »

matley81
con cool and quiet disabilitato, non reclama più per il clock, ma i messaggi di errore restano
Io, sinceramente, al posto tuo tenterei con un Kernel diverso da quello che usi ora.
Uno qualsiasi, senza necessità di installare.
prova da CD e manda dmesg e vediamo se la prende meglio.
Avatar utente
matley81
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 601
Iscrizione: martedì 18 settembre 2007, 10:27

Re: problema bios scheda madre

Messaggio da matley81 »

non ho la live qui con me in ufficio; devo per forza fare domani; sicuramente comunque non avevo questo problema con ubuntu 8.10 ovvero con un kernel diverso da questo... non potrebbe essere il fatto che ho installato tutto in formato ext4 invece che ext3? non so che pensare... comunque sono anche qua https://bugs.launchpad.net/ubuntu/+bug/345717 ma non so cosa sia kern. log...
nessuno sa dov è il villaggio degli gnome ?
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: Bing [Bot] e 9 ospiti