[Risolto] 9.04 Jaunty Jackalope - Non si spegne il pc - [18963.004231] System Halted

Problemi riscontrati durante l'installazione di Ubuntu, degli aggiornamenti e degli avanzamenti del sistema.
Scrivi risposta
Diarreaverde
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 327
Iscrizione: mercoledì 6 giugno 2007, 18:45

[Risolto] 9.04 Jaunty Jackalope - Non si spegne il pc - [18963.004231] System Halted

Messaggio da Diarreaverde »

Ciao ragazzi, ho aggiornato alla 9.04, e quando arresto il sistema, dopo la scharmata del contdown di 60 secondi all'arresto mi compare una finestra di errore per pochi secondi che non riesco a leggere, poi viene arrestato il server grafico e il computer rimane accesso su una schermata nera e scritta bianca:

Codice: Seleziona tutto

[18963.004231] System Halted
Per spegnerlo devo schiacciare il tasto power.

Non so se centra qualcosa, ma sono andato a vedere il syslog, ho trovato questi messaggi sopsetti:

Codice: Seleziona tutto

Jun 26 14:41:11 mark-desktop kernel: [    0.276091] pnp: PnP ACPI: disabled
Jun 26 14:41:11 mark-desktop kernel: [    0.276095] PnPBIOS: Scanning system for PnP BIOS support...
Jun 26 14:41:11 mark-desktop kernel: [    0.276102] PnPBIOS: Found PnP BIOS installation structure at 0xc00f3030
Jun 26 14:41:11 mark-desktop kernel: [    0.276105] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x3dca, dseg 0xf0000
Jun 26 14:41:11 mark-desktop kernel: [    0.276267] PNPBIOS fault.. attempting recovery.
Jun 26 14:41:11 mark-desktop kernel: [    0.276322] PnPBIOS: Warning! Your PnP BIOS caused a fatal error. Attempting to continue
Jun 26 14:41:11 mark-desktop kernel: [    0.276375] PnPBIOS: You may need to reboot with the "pnpbios=off" option to operate stably
Jun 26 14:41:11 mark-desktop kernel: [    0.276428] PnPBIOS: Check with your vendor for an updated BIOS
Jun 26 14:41:11 mark-desktop kernel: [    0.276479] PnPBIOS: get_dev_node: unexpected status 0x37
Jun 26 14:41:11 mark-desktop kernel: [    0.276530] PnPBIOS: 6 nodes reported by PnP BIOS; 6 recorded by driver
Sapete come risolvere?
Ultima modifica di Diarreaverde il venerdì 26 giugno 2009, 18:37, modificato 1 volta in totale.
The box said "Requires Windows Xp or better."
So I installed GNU/Linux.
Avatar utente
bingel
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 4026
Iscrizione: lunedì 3 aprile 2006, 10:17

Re: 9.04 Jaunty Jackalope - Non si spegne il pc - [18963.004231] System Halted

Messaggio da bingel »

Prova a fare come suggerito:

aggiungi questa opzione nel file /etc/boot/grub/menu.lst alla riga del kernel

Codice: Seleziona tutto

"pnpbios=off"
Free Thought - Free World
Diarreaverde
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 327
Iscrizione: mercoledì 6 giugno 2007, 18:45

Re: 9.04 Jaunty Jackalope - Non si spegne il pc - [18963.004231] System Halted

Messaggio da Diarreaverde »

Ho provato, ma non funziona.
Ho spento il pc senza effettuare il login, il messaggio è leggermente diverso, ma credo che dipoenda dal fatto di non essermi loggato:

Codice: Seleziona tutto

*Will now halt
halt: unable to iterate IDE devices: no such file or directory
[  55.812210] System Halted
The box said "Requires Windows Xp or better."
So I installed GNU/Linux.
Avatar utente
bingel
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 4026
Iscrizione: lunedì 3 aprile 2006, 10:17

Re: 9.04 Jaunty Jackalope - Non si spegne il pc - [18963.004231] System Halted

Messaggio da bingel »

spero l'avrai messo senza virgolette ...a me sono venute scritte per sbaglio.

Prova anche questo:

Codice: Seleziona tutto

acpi=off
Free Thought - Free World
Diarreaverde
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 327
Iscrizione: mercoledì 6 giugno 2007, 18:45

Re: 9.04 Jaunty Jackalope - Non si spegne il pc - [18963.004231] System Halted

Messaggio da Diarreaverde »

Si,si l'ho messo senza virgolette in coda al kernel selezionato..
Mentre:

Codice: Seleziona tutto

acpi=off
Lo trovo già inserito.. era così anche prima dell'aggiornamento, è possibile magari che l'avevo inserito in qualche distribuzione precedente e che sia rimasta?
The box said "Requires Windows Xp or better."
So I installed GNU/Linux.
Avatar utente
bingel
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 4026
Iscrizione: lunedì 3 aprile 2006, 10:17

Re: 9.04 Jaunty Jackalope - Non si spegne il pc - [18963.004231] System Halted

Messaggio da bingel »

prova allora ad abilitare l'acpi ...ma onestamente sto annaspando nel buio


Hai provato a spegnere il pc da terminale?:

Codice: Seleziona tutto

sudo shutdown -h now
Free Thought - Free World
Avatar utente
gabry79
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1557
Iscrizione: sabato 16 agosto 2008, 13:37
Località: udine

Re: 9.04 Jaunty Jackalope - Non si spegne il pc - [18963.004231] System Halted

Messaggio da gabry79 »

Diarreaverde ha scritto: Si,si l'ho messo senza virgolette in coda al kernel selezionato..
Mentre:

Codice: Seleziona tutto

acpi=off
Lo trovo già inserito.. era così anche prima dell'aggiornamento, è possibile magari che l'avevo inserito in qualche distribuzione precedente e che sia rimasta?
Acpi e' un sistema standard di controllo energetico se l'avevi settato su off e il pc andava e' perche' il tuo hardware non supporta tale controllo..ora a meno che non hai cambiato hardware lascialo come ti funzionava, cioe' su off
Bianco e' il cappello di coloro che impavidi imboccano la via accecante della luce..J.K.Senior
http://wiki.ubuntu-it.org/GabrieleM  http://www.linuxqualityhelp.it/
Arch+Sabayon4.2+Slackware+Ubuntu server e non occorre altro....
Diarreaverde
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 327
Iscrizione: mercoledì 6 giugno 2007, 18:45

Re: 9.04 Jaunty Jackalope - Non si spegne il pc - [18963.004231] System Halted

Messaggio da Diarreaverde »

gabry79 ha scritto: Acpi e' un sistema standard di controllo energetico se l'avevi settato su off e il pc andava e' perche' il tuo hardware non supporta tale controllo..ora a meno che non hai cambiato hardware lascialo come ti funzionava, cioe' su off
ok,grazie..ma per lo spegnimento?
The box said "Requires Windows Xp or better."
So I installed GNU/Linux.
Avatar utente
gabry79
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1557
Iscrizione: sabato 16 agosto 2008, 13:37
Località: udine

Re: 9.04 Jaunty Jackalope - Non si spegne il pc - [18963.004231] System Halted

Messaggio da gabry79 »

Si..non vorrei che per un tuo problema precedente l'avevi settato inutilmente e invece il tuo pc lo necessita, quindi prova a toglierlo e se non risolvi rimetterlo che poinel caso proviamo un'altra via
Bianco e' il cappello di coloro che impavidi imboccano la via accecante della luce..J.K.Senior
http://wiki.ubuntu-it.org/GabrieleM  http://www.linuxqualityhelp.it/
Arch+Sabayon4.2+Slackware+Ubuntu server e non occorre altro....
Diarreaverde
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 327
Iscrizione: mercoledì 6 giugno 2007, 18:45

Re: 9.04 Jaunty Jackalope - Non si spegne il pc - [18963.004231] System Halted

Messaggio da Diarreaverde »

bingel ha scritto: prova allora ad abilitare l'acpi ...ma onestamente sto annaspando nel buio


Hai provato a spegnere il pc da terminale?:

Codice: Seleziona tutto

sudo shutdown -h now
Provato e stesso errore.
The box said "Requires Windows Xp or better."
So I installed GNU/Linux.
Diarreaverde
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 327
Iscrizione: mercoledì 6 giugno 2007, 18:45

[Risolto] Re: 9.04 Jaunty Jackalope - Non si spegne il pc - [18963.004231] System Halted

Messaggio da Diarreaverde »

Ho tolto "acpi=off" e funziona! grandi ragazzi! grazie!
Ma ora nei prossimi aggiornamenti del kernel? non me lo mette di default o devo toglierlo sempre?
The box said "Requires Windows Xp or better."
So I installed GNU/Linux.
Avatar utente
gabry79
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1557
Iscrizione: sabato 16 agosto 2008, 13:37
Località: udine

Re: [Risolto] 9.04 Jaunty Jackalope - Non si spegne il pc - [18963.004231] System Halted

Messaggio da gabry79 »

Non credo eventualmente ora sai a cosa serve acpi e cosa fare.
Alla prossima
Bianco e' il cappello di coloro che impavidi imboccano la via accecante della luce..J.K.Senior
http://wiki.ubuntu-it.org/GabrieleM  http://www.linuxqualityhelp.it/
Arch+Sabayon4.2+Slackware+Ubuntu server e non occorre altro....
Avatar utente
Oberbullz
Prode Principiante
Messaggi: 112
Iscrizione: martedì 23 gennaio 2007, 16:40
Località: Olbia

Re: [Risolto] 9.04 Jaunty Jackalope - Non si spegne il pc - [18963.004231] System Halted

Messaggio da Oberbullz »

Ciao a tutti... a me è successo lo stesso problema, ma non riesco a risolverlo in quanto non trovo il percorso di grub da modificare...è forse perchè non ho altri s.o. nel computer e quindi non mi dà il menù??? qualcuno può aiutarmi???
grazie
in perenne stato di attesa...
Avatar utente
bingel
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 4026
Iscrizione: lunedì 3 aprile 2006, 10:17

Re: [Risolto] 9.04 Jaunty Jackalope - Non si spegne il pc - [18963.004231] System Halted

Messaggio da bingel »

ma com'è possibile che "non trovi grub"!?!?!? ...cosa usa la tua ubuntu per fare il boot?

Prova a cercare meglio e se proprio non lo trovi:

Codice: Seleziona tutto

sudo find / -wholename '*grub*' | grep menu.lst
Ultima modifica di bingel il venerdì 21 agosto 2009, 20:56, modificato 1 volta in totale.
Free Thought - Free World
Avatar utente
Oberbullz
Prode Principiante
Messaggi: 112
Iscrizione: martedì 23 gennaio 2007, 16:40
Località: Olbia

Re: [Risolto] 9.04 Jaunty Jackalope - Non si spegne il pc - [18963.004231] System Halted

Messaggio da Oberbullz »

ops  trovato era dirett nella cartella /boot...  (mad)

ecco ora qlcuno mi spiega di preciso dove devo mettere acpi=off e pnpbios=off???
nn vorrei poi bloccarmi il pc...
questo è il mio menu.lst

Codice: Seleziona tutto

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default		0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout		3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title		Windows 95/98/NT/2000
# root		(hd0,0)
# makeactive
# chainloader	+1
#
# title		Linux
# root		(hd0,1)
# kernel	/vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=fd184874-2b70-405e-956a-c2ac6b7f6c7f ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=fd184874-2b70-405e-956a-c2ac6b7f6c7f

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title		Ubuntu 9.04, kernel 2.6.28-15-generic
uuid		fd184874-2b70-405e-956a-c2ac6b7f6c7f
kernel		/boot/vmlinuz-2.6.28-15-generic root=UUID=fd184874-2b70-405e-956a-c2ac6b7f6c7f ro quiet splash 
initrd		/boot/initrd.img-2.6.28-15-generic
quiet

title		Ubuntu 9.04, kernel 2.6.28-15-generic (recovery mode)
uuid		fd184874-2b70-405e-956a-c2ac6b7f6c7f
kernel		/boot/vmlinuz-2.6.28-15-generic root=UUID=fd184874-2b70-405e-956a-c2ac6b7f6c7f ro  single
initrd		/boot/initrd.img-2.6.28-15-generic

title		Ubuntu 9.04, memtest86+
uuid		fd184874-2b70-405e-956a-c2ac6b7f6c7f
kernel		/boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST
Ultima modifica di Oberbullz il domenica 13 settembre 2009, 12:55, modificato 1 volta in totale.
in perenne stato di attesa...
^alessio^
Rampante Reduce
Rampante Reduce
Messaggi: 5384
Iscrizione: giovedì 15 maggio 2008, 22:00
Sesso: Maschile
Località: como

Re: [Risolto] 9.04 Jaunty Jackalope - Non si spegne il pc - [18963.004231] System Halted

Messaggio da ^alessio^ »

ciao,guarda che @Diarreaverde ha risolto togliendolo acpi=off dalla riga kernel, non aggiungendolo, comunque se tu vuoi aggiungerlo

Codice: Seleziona tutto

## ## End Default Options ##

title		Ubuntu 9.04, kernel 2.6.28-15-generic
uuid		fd184874-2b70-405e-956a-c2ac6b7f6c7f
kernel		/boot/vmlinuz-2.6.28-15-generic root=UUID=fd184874-2b70-405e-956a-c2ac6b7f6c7f ro quiet splash acpi=off
initrd		/boot/initrd.img-2.6.28-15-generic
quiet
alla riga kernel dopo quiet splash ci aggiungi acpi=off
 
Scrivi risposta

Ritorna a “Installazione e aggiornamento del sistema operativo”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 3 ospiti