Xorg non mi riconosce i driver di nulla!!
Xorg non mi riconosce i driver di nulla!!
Ciao, vi posto il mio file xorg.conf
In pratica il problema è che non mi trova a, differenza degli altri xorg che ho visto in giro per internet, i nomi dei driver e la possibilità di modificare la frequenza dello schermo!
HELP!
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Identifier "Configured Video Device"
Option "AccelMethod" "XAA"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
In pratica il problema è che non mi trova a, differenza degli altri xorg che ho visto in giro per internet, i nomi dei driver e la possibilità di modificare la frequenza dello schermo!
HELP!
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Identifier "Configured Video Device"
Option "AccelMethod" "XAA"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
Re: Xorg non mi riconosce i driver di nulla!!
Questa è la forma normale degli xorg.conf recenti. La 9.04 ce lo ha così. La 8.10 non l'ho quasi vista e non ricordo. eventuali modifiche possono essere apportate dopo. Ovviamente è importante fare prima un backup.
Ultima modifica di nativis il sabato 4 luglio 2009, 20:47, modificato 1 volta in totale.
Re: Xorg non mi riconosce i driver di nulla!!
E come faccio ad abbassare la frequenza dello schermo allora?? Perchè dalle opzioni classiche non me lo permette..
Re: Xorg non mi riconosce i driver di nulla!!
Ci sono vari modi ma molti dipendono dalla scheda grafica e dai drivers che hai.
Se da Sistema->Preferenze -> Visualizzazione, non ottieni risultati, posta quello che esce da questi comandi:
Io uso una ati con drivers proprietari e mi è bastato aggiungere poco.
Fino a poco tempo fa, avevo aggiunto alla sezione "Screen", subsezione "Display", la stringa "Modes".
Per esempio, nel mio caso, la forma del rigo Modes è questa:
...dove 60 sono gli Hz
Solo in seguito ho aggiunto le stringhe HorizSync, VertRefresh e ModeLine alla sezione Monitor.
Se da Sistema->Preferenze -> Visualizzazione, non ottieni risultati, posta quello che esce da questi comandi:
Codice: Seleziona tutto
lspci | grep -i vgaCodice: Seleziona tutto
glxinfo | grep vendorFino a poco tempo fa, avevo aggiunto alla sezione "Screen", subsezione "Display", la stringa "Modes".
Per esempio, nel mio caso, la forma del rigo Modes è questa:
Codice: Seleziona tutto
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768_60"
EndSubSection
EndSectionSolo in seguito ho aggiunto le stringhe HorizSync, VertRefresh e ModeLine alla sezione Monitor.
Ultima modifica di nativis il sabato 4 luglio 2009, 21:14, modificato 1 volta in totale.
- Guiodic
- Accecante Asceta

- Messaggi: 28474
- Iscrizione: martedì 24 aprile 2007, 15:28
- Località: Roma
- Contatti:
Re: Xorg non mi riconosce i driver di nulla!!
Option "AccelMethod" "XAA"
perché questa?
perché questa?
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 3 ospiti
