mal funzionamento del sistema
-
davprest
- Scoppiettante Seguace

- Messaggi: 451
- Iscrizione: venerdì 10 luglio 2009, 23:39
- Località: Cosenza
- Contatti:
mal funzionamento del sistema
buonasera a tutti. mi capita molto spesso che quando provo a connettermi a internet con i wireless mi si blocca totalmente il pc, e in più tutte lo volte che lo spengo appena prima che si chiudesse lo schermo diventa strano e nn si ci capisce più niente. si può fare qualcosa o devo reinstallare ubuntu ???il pc nn può essere è nuovo e con windows funzionava bene. aiutatemi sto uscendo pazzo >:( >:( >:( ::) ::)
« Si dice che il minimo battito d’ali di una farfalla sia in grado di provocare un uragano dall’altra parte del mondo »
Re: mal funzionamento del sistema
quando ti si blocca il pc se sei costretto a riavviare posta il risultato di se non sei costretto a riavviare solo . Inoltre specifica le caratteristiche del pc in particolare che scheda\chiavetta wireless usi.
Codice: Seleziona tutto
sudo gedit /var/log/dmesg.0Codice: Seleziona tutto
dmesghttp://petition.stopsoftwarepatents.eu/
d95555c36aeeee715c0a34ce1e4dd713
d95555c36aeeee715c0a34ce1e4dd713
-
davprest
- Scoppiettante Seguace

- Messaggi: 451
- Iscrizione: venerdì 10 luglio 2009, 23:39
- Località: Cosenza
- Contatti:
Re: mal funzionamento del sistema
il risultato di quello che mi hai fatto fare è questo:
[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-13-generic (buildd@vernadsky) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #45-Ubuntu SMP Tue Jun 30 19:49:51 UTC 2009 (Ubuntu 2.6.28-13.45-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffa8000 (usable)
[ 0.000000] BIOS-e820: 00000000bffa8000 - 00000000bffb0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffbe000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bffbe000 - 00000000c0000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0xbffa8 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bffa8000 (usable)
[ 0.000000] modified: 00000000bffa8000 - 00000000bffb0000 (ACPI NVS)
[ 0.000000] modified: 00000000bffb0000 - 00000000bffbe000 (ACPI data)
[ 0.000000] modified: 00000000bffbe000 - 00000000c0000000 (ACPI NVS)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378bd000 - 37fefe69
[ 0.000000] Allocated new RAMDISK: 0087b000 - 00fade69
[ 0.000000] Move RAMDISK from 00000000378bd000 - 0000000037fefe68 to 0087b000 - 00fade68
[ 0.000000] ACPI: RSDP 000F98C0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT BFFB0000, 004C (r1 _ASUS_ Notebook 20090218 MSFT 97)
[ 0.000000] ACPI: FACP BFFB0200, 0084 (r1 021809 FACP1713 20090218 MSFT 97)
[ 0.000000] ACPI: DSDT BFFB0680, 97D8 (r1 F50SV F50SV001 1 INTL 20051117)
[ 0.000000] ACPI: FACS BFFBE000, 0040
[ 0.000000] ACPI: APIC BFFB0390, 005C (r1 021809 APIC1713 20090218 MSFT 97)
[ 0.000000] ACPI: MCFG BFFB0430, 003C (r1 021809 OEMMCFG 20090218 MSFT 97)
[ 0.000000] ACPI: SLIC BFFB0470, 0176 (r1 _ASUS_ Notebook 20090218 MSFT 97)
[ 0.000000] ACPI: ECDT BFFB0620, 0055 (r1 021809 OEMECDT 20090218 MSFT 97)
[ 0.000000] ACPI: DBGP BFFB03F0, 0034 (r1 021809 DBGP1713 20090218 MSFT 97)
[ 0.000000] ACPI: BOOT BFFB05F0, 0028 (r1 021809 BOOT1713 20090218 MSFT 97)
[ 0.000000] ACPI: OEMB BFFBE040, 0071 (r1 021809 OEMB1713 20090218 MSFT 97)
[ 0.000000] ACPI: HPET BFFB9E60, 0038 (r1 021809 OEMHPET 20090218 MSFT 97)
[ 0.000000] ACPI: SSDT BFFBED10, 04E6 (r1 PmRef CpuPm 3000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2187MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008760ac] TEXT DATA BSS ==> [0000100000 - 00008760ac]
[ 0.000000] #4 [0000877000 - 000087b000] INIT_PG_TABLE ==> [0000877000 - 000087b000]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [000087b000 - 0000fade69] NEW RAMDISK ==> [000087b000 - 0000fade69]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x000bffa8
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bffa8
[ 0.000000] On node 0 totalpages: 786231
[ 0.000000] free_area_init_node: node 0, pgdat c06c9500, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4376 pages used for memmap
[ 0.000000] HighMem zone: 555666 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x10398201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780087
[ 0.000000] Kernel command line: root=UUID=3951f61c-b6d2-409a-9aa4-bf830ba8c900 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2000.030 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 15726560 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 3088056k/3145376k available (4110k kernel code, 55940k reserved, 2196k data, 532k init, 2240168k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0731000 - 0xc07b6000 ( 532 kB)
[ 0.004000] .data : 0xc0503b9f - 0xc0728e60 (2196 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0503b9f (4110 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.06 BogoMIPS (lpj=8000120)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.018751] ACPI: Core revision 20080926
[ 0.023565] ACPI: Checking initramfs for custom DSDT
[ 0.332366] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.375539] CPU0: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz stepping 0a
[ 0.376001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4000.10 BogoMIPS (lpj=8000215)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.460543] CPU1: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz stepping 0a
[ 0.460559] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.464044] Brought up 2 CPUs
[ 0.464048] Total of 2 processors activated (8000.16 BogoMIPS).
[ 0.464087] CPU0 attaching sched-domain:
[ 0.464089] domain 0: span 0-1 level MC
[ 0.464092] groups: 0 1
[ 0.464098] CPU1 attaching sched-domain:
[ 0.464100] domain 0: span 0-1 level MC
[ 0.464102] groups: 1 0
[ 0.464177] net_namespace: 776 bytes
[ 0.464177] Booting paravirtualized kernel on bare hardware
[ 0.464331] Time: 20:11:52 Date: 07/20/09
[ 0.464331] regulator: core version 0.5
[ 0.464331] NET: Registered protocol family 16
[ 0.464331] EISA bus registered
[ 0.464331] ACPI: bus type pci registered
[ 0.464331] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.464331] PCI: Not using MMCONFIG.
[ 0.465351] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
[ 0.465353] PCI: Using configuration type 1 for base access
[ 0.468473] ACPI: EC: EC description table is found, configuring boot EC
[ 0.480407] ACPI: Interpreter enabled
[ 0.480414] ACPI: (supports S0 S3 S4 S5)
[ 0.480435] ACPI: Using IOAPIC for interrupt routing
[ 0.480538] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.483837] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.483840] PCI: Using MMCONFIG for extended config space
[ 0.489667] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.489670] ACPI: EC: driver started in poll mode
[ 0.489813] ACPI: No dock devices found.
[ 0.489890] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.489996] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.490000] pci 0000:00:01.0: PME# disabled
[ 0.490108] pci 0000:00:02.5: reg 20 io port: [0xfff0-0xffff]
[ 0.490129] pci 0000:00:02.5: PME# supported from D3cold
[ 0.490133] pci 0000:00:02.5: PME# disabled
[ 0.490157] pci 0000:00:03.0: reg 10 32bit mmio: [0xf9fff000-0xf9ffffff]
[ 0.490206] pci 0000:00:03.1: reg 10 32bit mmio: [0xf9ffe000-0xf9ffefff]
[ 0.490266] pci 0000:00:03.3: reg 10 32bit mmio: [0xf9ffd000-0xf9ffdfff]
[ 0.490302] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.490306] pci 0000:00:03.3: PME# disabled
[ 0.490343] pci 0000:00:04.0: reg 10 32bit mmio: [0xf9ffcc00-0xf9ffcc7f]
[ 0.490349] pci 0000:00:04.0: reg 14 io port: [0xcc00-0xcc7f]
[ 0.490381] pci 0000:00:04.0: supports D1 D2
[ 0.490383] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.490387] pci 0000:00:04.0: PME# disabled
[ 0.490420] pci 0000:00:05.0: reg 10 io port: [0xc800-0xc807]
[ 0.490427] pci 0000:00:05.0: reg 14 io port: [0xc400-0xc403]
[ 0.490433] pci 0000:00:05.0: reg 18 io port: [0xc000-0xc007]
[ 0.490440] pci 0000:00:05.0: reg 1c io port: [0xbc00-0xbc03]
[ 0.490447] pci 0000:00:05.0: reg 20 io port: [0xb800-0xb80f]
[ 0.490453] pci 0000:00:05.0: reg 24 io port: [0xb400-0xb47f]
[ 0.490468] pci 0000:00:05.0: PME# supported from D3cold
[ 0.490472] pci 0000:00:05.0: PME# disabled
[ 0.490528] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.490532] pci 0000:00:06.0: PME# disabled
[ 0.490595] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.490599] pci 0000:00:07.0: PME# disabled
[ 0.490647] pci 0000:00:0f.0: reg 10 32bit mmio: [0xf9ff4000-0xf9ff7fff]
[ 0.490684] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
[ 0.490688] pci 0000:00:0f.0: PME# disabled
[ 0.490760] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
[ 0.490775] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.490790] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
[ 0.490798] pci 0000:01:00.0: reg 24 io port: [0xdc00-0xdc7f]
[ 0.490806] pci 0000:01:00.0: reg 30 32bit mmio: [0xfde80000-0xfdefffff]
[ 0.490872] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[ 0.490877] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfdefffff]
[ 0.490883] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.490951] pci 0000:02:00.0: reg 10 64bit mmio: [0xfdff0000-0xfdffffff]
[ 0.491006] pci 0000:02:00.0: supports D1
[ 0.491008] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.491014] pci 0000:02:00.0: PME# disabled
[ 0.491087] pci 0000:00:06.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
[ 0.491146] pci 0000:00:07.0: bridge io port: [0xe000-0xefff]
[ 0.491150] pci 0000:00:07.0: bridge 32bit mmio: [0xfe000000-0xfebfffff]
[ 0.491157] pci 0000:00:07.0: bridge 64bit mmio pref: [0xf6000000-0xf8ffffff]
[ 0.491174] bus 00 -> node 0
[ 0.491183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.491514] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.499145] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.499312] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.499475] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 10 11 12 14 15)
[ 0.499638] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *7 10 11 12 14 15)
[ 0.499801] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.499964] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 *15)
[ 0.500142] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 7 10 11 12 14 15)
[ 0.500305] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.500556] ACPI: WMI: Mapper loaded
[ 0.500593] SCSI subsystem initialized
[ 0.500593] libata version 3.00 loaded.
[ 0.500593] usbcore: registered new interface driver usbfs
[ 0.500593] usbcore: registered new interface driver hub
[ 0.500593] usbcore: registered new device driver usb
[ 0.500593] PCI: Using ACPI for IRQ routing
[ 0.508009] Bluetooth: Core ver 2.13
[ 0.508021] NET: Registered protocol family 31
[ 0.508021] Bluetooth: HCI device and connection manager initialized
[ 0.508021] Bluetooth: HCI socket layer initialized
[ 0.508021] NET: Registered protocol family 8
[ 0.508021] NET: Registered protocol family 20
[ 0.508032] NetLabel: Initializing
[ 0.508033] NetLabel: domain hash size = 128
[ 0.508035] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.508048] NetLabel: unlabeled traffic allowed by default
[ 0.508061] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.508065] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.512060] AppArmor: AppArmor Filesystem Enabled
[ 0.516009] Switched to high resolution mode on CPU 0
[ 0.516598] Switched to high resolution mode on CPU 1
[ 0.520009] pnp: PnP ACPI init
[ 0.520017] ACPI: bus type pnp registered
[ 0.522415] pnp: PnP ACPI: found 12 devices
[ 0.522417] ACPI: ACPI bus type pnp unregistered
[ 0.522421] PnPBIOS: Disabled by ACPI PNP
[ 0.522433] system 00:06: ioport range 0x290-0x297 has been reserved
[ 0.522435] system 00:06: ioport range 0xc00-0xc05 has been reserved
[ 0.522438] system 00:06: ioport range 0xd00-0xd05 has been reserved
[ 0.522440] system 00:06: ioport range 0x480-0x48f has been reserved
[ 0.522442] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.522445] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.522447] system 00:06: ioport range 0x880-0x8ff has been reserved
[ 0.522450] system 00:06: ioport range 0xc00-0xc7f could not be reserved
[ 0.522452] system 00:06: ioport range 0x2000-0x20fe has been reserved
[ 0.522455] system 00:06: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.522458] system 00:06: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.522461] system 00:06: iomem range 0xffee0000-0xffefffff has been reserved
[ 0.522463] system 00:06: iomem range 0xfed10000-0xfed3ffff has been reserved
[ 0.522469] system 00:09: ioport range 0x250-0x253 has been reserved
[ 0.522472] system 00:09: ioport range 0x256-0x25f has been reserved
[ 0.522474] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.522477] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.522482] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.522487] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 0.522490] system 00:0b: iomem range 0xc0000-0xcffff could not be reserved
[ 0.522492] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[ 0.522495] system 00:0b: iomem range 0x100000-0xbfffffff could not be reserved
[ 0.522498] system 00:0b: iomem range 0xe0000000-0xffffffff could not be reserved
[ 0.557161] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.557164] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 0.557169] pci 0000:00:01.0: MEM window: 0xfa000000-0xfdefffff
[ 0.557174] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.557180] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02
[ 0.557182] pci 0000:00:06.0: IO window: disabled
[ 0.557188] pci 0000:00:06.0: MEM window: 0xfdf00000-0xfdffffff
[ 0.557192] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.557198] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 0.557201] pci 0000:00:07.0: IO window: 0xe000-0xefff
[ 0.557207] pci 0000:00:07.0: MEM window: 0xfe000000-0xfebfffff
[ 0.557211] pci 0000:00:07.0: PREFETCH window: 0x000000f6000000-0x000000f8ffffff
[ 0.557227] pci 0000:00:01.0: setting latency timer to 64
[ 0.557236] pci 0000:00:06.0: setting latency timer to 64
[ 0.557246] pci 0000:00:07.0: setting latency timer to 64
[ 0.557249] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.557251] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.557254] bus: 01 index 0 io port: [0xd000-0xdfff]
[ 0.557256] bus: 01 index 1 mmio: [0xfa000000-0xfdefffff]
[ 0.557258] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
[ 0.557260] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.557261] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.557263] bus: 02 index 1 mmio: [0xfdf00000-0xfdffffff]
[ 0.557265] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.557267] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.557269] bus: 03 index 0 io port: [0xe000-0xefff]
[ 0.557271] bus: 03 index 1 mmio: [0xfe000000-0xfebfffff]
[ 0.557273] bus: 03 index 2 mmio: [0xf6000000-0xf8ffffff]
[ 0.557275] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.557282] NET: Registered protocol family 2
[ 0.572050] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.572280] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.572803] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.573110] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.573112] TCP reno registered
[ 0.580072] NET: Registered protocol family 1
[ 0.580196] checking if image is initramfs... it is
[ 1.192748] Freeing initrd memory: 7371k freed
[ 1.192798] Simple Boot Flag at 0x71 set to 0x1
[ 1.193018] cpufreq: No nForce2 chipset.
[ 1.193182] audit: initializing netlink socket (disabled)
[ 1.193217] type=2000 audit(1248120712.192:1): initialized
[ 1.200718] highmem bounce pool size: 64 pages
[ 1.200724] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.202048] VFS: Disk quotas dquot_6.5.1
[ 1.202104] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.202695] fuse init (API version 7.10)
[ 1.202774] msgmni has been set to 1672
[ 1.202958] alg: No test for stdrng (krng)
[ 1.202968] io scheduler noop registered
[ 1.202970] io scheduler anticipatory registered
[ 1.202973] io scheduler deadline registered
[ 1.202985] io scheduler cfq registered (default)
[ 1.264048] pci 0000:01:00.0: Boot video device
[ 1.266223] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.266261] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.266294] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 1.266305] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.266372] pcieport-driver 0000:00:06.0: setting latency timer to 64
[ 1.266423] pcieport-driver 0000:00:06.0: found MSI capability
[ 1.266451] pcieport-driver 0000:00:06.0: irq 2302 for MSI/MSI-X
[ 1.266464] pci_express 0000:00:06.0:pcie00: allocate port service
[ 1.266533] pcieport-driver 0000:00:07.0: setting latency timer to 64
[ 1.266584] pcieport-driver 0000:00:07.0: found MSI capability
[ 1.266612] pcieport-driver 0000:00:07.0: irq 2301 for MSI/MSI-X
[ 1.266625] pci_express 0000:00:07.0:pcie00: allocate port service
[ 1.266636] pci_express 0000:00:07.0:pcie02: allocate port service
[ 1.266710] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.266942] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.267117] ACPI: AC Adapter [AC0] (on-line)
[ 1.267484] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 1.304709] ACPI: Battery Slot [BAT0] (battery present)
[ 1.304775] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.304778] ACPI: Power Button (FF) [PWRF]
[ 1.304829] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.304832] ACPI: Power Button (CM) [PWRB]
[ 1.304869] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.304875] ACPI: Sleep Button (CM) [SLPB]
[ 1.304914] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 1.314352] ACPI: Lid Switch [LID]
[ 1.314951] ACPI: SSDT BFFBE390, 0202 (r1 PmRef Cpu0Ist 3000 INTL 20051117)
[ 1.315406] ACPI: SSDT BFFBE630, 06D9 (r1 PmRef Cpu0Cst 3001 INTL 20051117)
[ 1.315955] Monitor-Mwait will be used to enter C-1 state
[ 1.315959] Monitor-Mwait will be used to enter C-2 state
[ 1.315975] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 1.315999] processor ACPI_CPU:00: registered as cooling_device0
[ 1.316008] ACPI: Processor [P001] (supports 8 throttling states)
[ 1.316368] ACPI: SSDT BFFBE2C0, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20051117)
[ 1.316766] ACPI: SSDT BFFBE5A0, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20051117)
[ 1.317371] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 1.317388] processor ACPI_CPU:01: registered as cooling_device1
[ 1.317392] ACPI: Processor [P002] (supports 8 throttling states)
[ 1.323089] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.324220] ACPI: Thermal Zone [THRM] (48 C)
[ 1.324267] isapnp: Scanning for PnP cards...
[ 1.677782] isapnp: No Plug & Play device found
[ 1.689232] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.690240] brd: module loaded
[ 1.690531] loop: module loaded
[ 1.690593] Fixed MDIO Bus: probed
[ 1.690599] PPP generic driver version 2.4.2
[ 1.690655] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 1.690681] Driver 'sd' needs updating - please use bus_type methods
[ 1.690689] Driver 'sr' needs updating - please use bus_type methods
[ 1.690832] sata_sis 0000:00:05.0: version 1.0
[ 1.690848] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.690853] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode
[ 1.690950] scsi0 : sata_sis
[ 1.691026] scsi1 : sata_sis
[ 1.691611] ata1: PATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 17
[ 1.691614] ata2: PATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 17
[ 1.900201] ata1.00: ATA-8: ST9500325AS, 0002SDM1, max UDMA/133
[ 1.900203] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.916591] ata1.00: configured for UDMA/133
[ 2.080219] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RR07, max UDMA/133
[ 2.096238] ata2.00: configured for UDMA/133
[ 2.098603] scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0002 PQ: 0 ANSI: 5
[ 2.098688] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 2.098703] sd 0:0:0:0: [sda] Write Protect is off
[ 2.098705] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.098728] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.098786] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 2.098799] sd 0:0:0:0: [sda] Write Protect is off
[ 2.098802] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.098823] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.098827] sda: sda1 sda2 sda3
[ 2.146445] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.146485] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.151027] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50N RR07 PQ: 0 ANSI: 5
[ 2.162220] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.162223] Uniform CD-ROM driver Revision: 3.20
[ 2.162303] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.162335] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.162715] pata_sis 0000:00:02.5: version 0.5.2
[ 2.162806] scsi2 : pata_sis
[ 2.162861] scsi3 : pata_sis
[ 2.163407] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfff0 irq 14
[ 2.163410] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfff8 irq 15
[ 2.316080] ata4: port disabled. ignoring.
[ 2.316178] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.316197] ehci_hcd 0000:00:03.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.316215] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 2.316268] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 2.316310] ehci_hcd 0000:00:03.3: irq 22, io mem 0xf9ffd000
[ 2.328008] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 2.328081] usb usb1: configuration #1 chosen from 1 choice
[ 2.328107] hub 1-0:1.0: USB hub found
[ 2.328114] hub 1-0:1.0: 8 ports detected
[ 2.328208] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.328221] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.328231] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 2.328274] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 2.328289] ohci_hcd 0000:00:03.0: irq 20, io mem 0xf9fff000
[ 2.386044] usb usb2: configuration #1 chosen from 1 choice
[ 2.386066] hub 2-0:1.0: USB hub found
[ 2.386074] hub 2-0:1.0: 4 ports detected
[ 2.386156] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.386166] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 2.386207] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 2.386226] ohci_hcd 0000:00:03.1: irq 21, io mem 0xf9ffe000
[ 2.442043] usb usb3: configuration #1 chosen from 1 choice
[ 2.442068] hub 3-0:1.0: USB hub found
[ 2.442075] hub 3-0:1.0: 4 ports detected
[ 2.442149] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.442218] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.445157] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.446746] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.446751] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.446754] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.446756] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.446758] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.449033] mice: PS/2 mouse device common for all mice
[ 2.469059] rtc_cmos 00:08: RTC can wake from S4
[ 2.469090] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 2.469110] rtc0: alarms up to one year, 114 bytes nvram, hpet irqs
[ 2.469161] device-mapper: uevent: version 1.0.3
[ 2.469238] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.469304] device-mapper: multipath: version 1.0.5 loaded
[ 2.469306] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.469371] EISA: Probing bus 0 at eisa.0
[ 2.469381] Cannot allocate resource for EISA slot 2
[ 2.469403] EISA: Detected 0 cards.
[ 2.469494] cpuidle: using governor ladder
[ 2.469576] cpuidle: using governor menu
[ 2.470051] TCP cubic registered
[ 2.470139] NET: Registered protocol family 10
[ 2.470539] lo: Disabled Privacy Extensions
[ 2.470852] NET: Registered protocol family 17
[ 2.470868] Bluetooth: L2CAP ver 2.11
[ 2.470869] Bluetooth: L2CAP socket layer initialized
[ 2.470872] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.470874] Bluetooth: SCO socket layer initialized
[ 2.470901] Bluetooth: RFCOMM socket layer initialized
[ 2.470907] Bluetooth: RFCOMM TTY layer initialized
[ 2.470909] Bluetooth: RFCOMM ver 1.10
[ 2.471203] Marking TSC unstable due to TSC halts in idle
[ 2.471381] Using IPI No-Shortcut mode
[ 2.471444] registered taskstats version 1
[ 2.471529] Magic number: 1:248:195
[ 2.471599] rtc_cmos 00:08: setting system clock to 2009-07-20 20:11:54 UTC (1248120714)
[ 2.471603] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.471604] EDD information not available.
[ 2.471891] Freeing unused kernel memory: 532k freed
[ 2.472017] Write protecting the kernel text: 4112k
[ 2.472060] Write protecting the kernel read-only data: 1524k
[ 2.507216] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.641027] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 2.889438] usb 1-5: configuration #1 chosen from 1 choice
[ 3.622833] PM: Starting manual resume from disk
[ 3.622837] PM: Resume from partition 8:6
[ 3.622838] PM: Checking hibernation image.
[ 3.624346] PM: Resume from disk failed.
[ 3.659039] EXT4-fs: barriers enabled
[ 3.681135] kjournald2 starting. Commit interval 5 seconds
[ 3.681148] EXT4-fs: delayed allocation enabled
[ 3.681151] EXT4-fs: file extents enabled
[ 3.697315] EXT4-fs: mballoc enabled
[ 3.697319] EXT4-fs: mounted filesystem with ordered data mode.
[ 8.177320] udev: starting version 141
[ 8.555321] asus-laptop: Asus Laptop Support version 0.42
[ 8.560576] asus-laptop: F50SV model detected
[ 8.566603] asus-laptop: Brightness ignored, must be controlled by ACPI video driver
[ 8.631095] Linux video capture interface: v2.00
[ 8.666187] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[ 8.667786] input: CNF7129 as /devices/pci0000:00/0000:00:03.3/usb1/1-5/1-5:1.0/input/input6
[ 8.668147] usbcore: registered new interface driver uvcvideo
[ 8.668183] USB Video Class driver (v0.1.0)
[ 8.732452] acpi device:19: registered as cooling_device2
[ 8.732593] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:15/device:16/input/input7
[ 8.739241] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 8.779163] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 8.860064] cfg80211: Calling CRDA to update world regulatory domain
[ 8.959000] Linux agpgart interface v0.103
[ 9.058640] cfg80211: World regulatory domain updated:
[ 9.058644] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.058647] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.058649] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.058651] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.058653] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.058655] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.067407] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 9.583825] sis190 Gigabit Ethernet driver 1.2 loaded.
[ 9.583850] sis190 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 9.583861] sis190 0000:00:04.0: setting latency timer to 64
[ 9.584046] 0000:00:04.0: Read MAC address from EEPROM
[ 9.584049] 0000:00:04.0: Error EEPROM read 0.
[ 9.584052] 0000:00:04.0: Read MAC address from APC.
[ 9.617570] 0000:00:04.0: Unknown PHY transceiver at address 0.
[ 9.729472] nvidia: module license 'NVIDIA' taints kernel.
[ 9.796268] ath9k: 0.1
[ 9.796322] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.796334] ath9k 0000:02:00.0: setting latency timer to 64
[ 9.985313] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.985321] nvidia 0000:01:00.0: setting latency timer to 64
[ 9.985509] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 10.163065] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[ 10.210170] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 10.233679] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 10.358769] Registered led device: ath9k-phy0:radio
[ 10.358787] Registered led device: ath9k-phy0:assoc
[ 10.358804] Registered led device: ath9k-phy0:tx
[ 10.358819] Registered led device: ath9k-phy0:rx
[ 10.359310] phy0: Atheros 9280: mem=0xf7d80000, irq=16
[ 10.376027] 0000:00:04.0: Using transceiver at address 1 as default.
[ 10.408825] 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f7ecec00 (IRQ: 19), 00:24:8c:92:84:d9
[ 10.408828] eth0: RGMII mode.
[ 10.408835] eth0: Enabling Auto-negotiation.
[ 10.440531] HDA Intel 0000:00:0f.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.440622] HDA Intel 0000:00:0f.0: setting latency timer to 64
[ 10.644633] lp: driver loaded but no devices found
[ 10.714405] Adding 21029044k swap on /dev/sda6. Priority:-1 extents:1 across:21029044k
[ 11.329906] EXT4 FS on sda5, internal journal on sda5:8
[ 12.453748] type=1505 audit(1248113524.480:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1986
[ 12.497318] type=1505 audit(1248113524.524:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1990
[ 12.497439] type=1505 audit(1248113524.524:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1990
[ 12.497490] type=1505 audit(1248113524.524:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1990
[ 12.497528] type=1505 audit(1248113524.524:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1990
[ 12.619054] type=1505 audit(1248113524.645:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1995
[ 12.619325] type=1505 audit(1248113524.645:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1995
[ 12.645363] type=1505 audit(1248113524.673:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1999
[ 15.524791] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 15.524795] vboxdrv: Successfully done.
[ 15.524796] vboxdrv: Found 2 processor cores.
[ 15.525755] vboxdrv: fAsync=0 offMin=0x186 offMax=0x2a8a
[ 15.525801] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 15.525803] vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009).
[ 16.276030] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.276033] Bluetooth: BNEP filters: protocol multicast
[ 16.309706] Bridge firewalling registered
[ 18.092396] ppdev: user-space parallel port driver
e per quanto riguarda i wireress scusa la mia ignoranza ma nn so come si vede. :-[ :-[
[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-13-generic (buildd@vernadsky) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #45-Ubuntu SMP Tue Jun 30 19:49:51 UTC 2009 (Ubuntu 2.6.28-13.45-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffa8000 (usable)
[ 0.000000] BIOS-e820: 00000000bffa8000 - 00000000bffb0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffbe000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bffbe000 - 00000000c0000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0xbffa8 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bffa8000 (usable)
[ 0.000000] modified: 00000000bffa8000 - 00000000bffb0000 (ACPI NVS)
[ 0.000000] modified: 00000000bffb0000 - 00000000bffbe000 (ACPI data)
[ 0.000000] modified: 00000000bffbe000 - 00000000c0000000 (ACPI NVS)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378bd000 - 37fefe69
[ 0.000000] Allocated new RAMDISK: 0087b000 - 00fade69
[ 0.000000] Move RAMDISK from 00000000378bd000 - 0000000037fefe68 to 0087b000 - 00fade68
[ 0.000000] ACPI: RSDP 000F98C0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT BFFB0000, 004C (r1 _ASUS_ Notebook 20090218 MSFT 97)
[ 0.000000] ACPI: FACP BFFB0200, 0084 (r1 021809 FACP1713 20090218 MSFT 97)
[ 0.000000] ACPI: DSDT BFFB0680, 97D8 (r1 F50SV F50SV001 1 INTL 20051117)
[ 0.000000] ACPI: FACS BFFBE000, 0040
[ 0.000000] ACPI: APIC BFFB0390, 005C (r1 021809 APIC1713 20090218 MSFT 97)
[ 0.000000] ACPI: MCFG BFFB0430, 003C (r1 021809 OEMMCFG 20090218 MSFT 97)
[ 0.000000] ACPI: SLIC BFFB0470, 0176 (r1 _ASUS_ Notebook 20090218 MSFT 97)
[ 0.000000] ACPI: ECDT BFFB0620, 0055 (r1 021809 OEMECDT 20090218 MSFT 97)
[ 0.000000] ACPI: DBGP BFFB03F0, 0034 (r1 021809 DBGP1713 20090218 MSFT 97)
[ 0.000000] ACPI: BOOT BFFB05F0, 0028 (r1 021809 BOOT1713 20090218 MSFT 97)
[ 0.000000] ACPI: OEMB BFFBE040, 0071 (r1 021809 OEMB1713 20090218 MSFT 97)
[ 0.000000] ACPI: HPET BFFB9E60, 0038 (r1 021809 OEMHPET 20090218 MSFT 97)
[ 0.000000] ACPI: SSDT BFFBED10, 04E6 (r1 PmRef CpuPm 3000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2187MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008760ac] TEXT DATA BSS ==> [0000100000 - 00008760ac]
[ 0.000000] #4 [0000877000 - 000087b000] INIT_PG_TABLE ==> [0000877000 - 000087b000]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [000087b000 - 0000fade69] NEW RAMDISK ==> [000087b000 - 0000fade69]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x000bffa8
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bffa8
[ 0.000000] On node 0 totalpages: 786231
[ 0.000000] free_area_init_node: node 0, pgdat c06c9500, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4376 pages used for memmap
[ 0.000000] HighMem zone: 555666 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x10398201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780087
[ 0.000000] Kernel command line: root=UUID=3951f61c-b6d2-409a-9aa4-bf830ba8c900 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2000.030 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 15726560 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 3088056k/3145376k available (4110k kernel code, 55940k reserved, 2196k data, 532k init, 2240168k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0731000 - 0xc07b6000 ( 532 kB)
[ 0.004000] .data : 0xc0503b9f - 0xc0728e60 (2196 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0503b9f (4110 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.06 BogoMIPS (lpj=8000120)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.018751] ACPI: Core revision 20080926
[ 0.023565] ACPI: Checking initramfs for custom DSDT
[ 0.332366] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.375539] CPU0: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz stepping 0a
[ 0.376001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4000.10 BogoMIPS (lpj=8000215)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.460543] CPU1: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz stepping 0a
[ 0.460559] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.464044] Brought up 2 CPUs
[ 0.464048] Total of 2 processors activated (8000.16 BogoMIPS).
[ 0.464087] CPU0 attaching sched-domain:
[ 0.464089] domain 0: span 0-1 level MC
[ 0.464092] groups: 0 1
[ 0.464098] CPU1 attaching sched-domain:
[ 0.464100] domain 0: span 0-1 level MC
[ 0.464102] groups: 1 0
[ 0.464177] net_namespace: 776 bytes
[ 0.464177] Booting paravirtualized kernel on bare hardware
[ 0.464331] Time: 20:11:52 Date: 07/20/09
[ 0.464331] regulator: core version 0.5
[ 0.464331] NET: Registered protocol family 16
[ 0.464331] EISA bus registered
[ 0.464331] ACPI: bus type pci registered
[ 0.464331] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.464331] PCI: Not using MMCONFIG.
[ 0.465351] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
[ 0.465353] PCI: Using configuration type 1 for base access
[ 0.468473] ACPI: EC: EC description table is found, configuring boot EC
[ 0.480407] ACPI: Interpreter enabled
[ 0.480414] ACPI: (supports S0 S3 S4 S5)
[ 0.480435] ACPI: Using IOAPIC for interrupt routing
[ 0.480538] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.483837] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.483840] PCI: Using MMCONFIG for extended config space
[ 0.489667] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.489670] ACPI: EC: driver started in poll mode
[ 0.489813] ACPI: No dock devices found.
[ 0.489890] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.489996] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.490000] pci 0000:00:01.0: PME# disabled
[ 0.490108] pci 0000:00:02.5: reg 20 io port: [0xfff0-0xffff]
[ 0.490129] pci 0000:00:02.5: PME# supported from D3cold
[ 0.490133] pci 0000:00:02.5: PME# disabled
[ 0.490157] pci 0000:00:03.0: reg 10 32bit mmio: [0xf9fff000-0xf9ffffff]
[ 0.490206] pci 0000:00:03.1: reg 10 32bit mmio: [0xf9ffe000-0xf9ffefff]
[ 0.490266] pci 0000:00:03.3: reg 10 32bit mmio: [0xf9ffd000-0xf9ffdfff]
[ 0.490302] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.490306] pci 0000:00:03.3: PME# disabled
[ 0.490343] pci 0000:00:04.0: reg 10 32bit mmio: [0xf9ffcc00-0xf9ffcc7f]
[ 0.490349] pci 0000:00:04.0: reg 14 io port: [0xcc00-0xcc7f]
[ 0.490381] pci 0000:00:04.0: supports D1 D2
[ 0.490383] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.490387] pci 0000:00:04.0: PME# disabled
[ 0.490420] pci 0000:00:05.0: reg 10 io port: [0xc800-0xc807]
[ 0.490427] pci 0000:00:05.0: reg 14 io port: [0xc400-0xc403]
[ 0.490433] pci 0000:00:05.0: reg 18 io port: [0xc000-0xc007]
[ 0.490440] pci 0000:00:05.0: reg 1c io port: [0xbc00-0xbc03]
[ 0.490447] pci 0000:00:05.0: reg 20 io port: [0xb800-0xb80f]
[ 0.490453] pci 0000:00:05.0: reg 24 io port: [0xb400-0xb47f]
[ 0.490468] pci 0000:00:05.0: PME# supported from D3cold
[ 0.490472] pci 0000:00:05.0: PME# disabled
[ 0.490528] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.490532] pci 0000:00:06.0: PME# disabled
[ 0.490595] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.490599] pci 0000:00:07.0: PME# disabled
[ 0.490647] pci 0000:00:0f.0: reg 10 32bit mmio: [0xf9ff4000-0xf9ff7fff]
[ 0.490684] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
[ 0.490688] pci 0000:00:0f.0: PME# disabled
[ 0.490760] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
[ 0.490775] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.490790] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
[ 0.490798] pci 0000:01:00.0: reg 24 io port: [0xdc00-0xdc7f]
[ 0.490806] pci 0000:01:00.0: reg 30 32bit mmio: [0xfde80000-0xfdefffff]
[ 0.490872] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[ 0.490877] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfdefffff]
[ 0.490883] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.490951] pci 0000:02:00.0: reg 10 64bit mmio: [0xfdff0000-0xfdffffff]
[ 0.491006] pci 0000:02:00.0: supports D1
[ 0.491008] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.491014] pci 0000:02:00.0: PME# disabled
[ 0.491087] pci 0000:00:06.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
[ 0.491146] pci 0000:00:07.0: bridge io port: [0xe000-0xefff]
[ 0.491150] pci 0000:00:07.0: bridge 32bit mmio: [0xfe000000-0xfebfffff]
[ 0.491157] pci 0000:00:07.0: bridge 64bit mmio pref: [0xf6000000-0xf8ffffff]
[ 0.491174] bus 00 -> node 0
[ 0.491183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.491514] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.499145] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.499312] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.499475] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 10 11 12 14 15)
[ 0.499638] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *7 10 11 12 14 15)
[ 0.499801] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.499964] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 *15)
[ 0.500142] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 7 10 11 12 14 15)
[ 0.500305] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.500556] ACPI: WMI: Mapper loaded
[ 0.500593] SCSI subsystem initialized
[ 0.500593] libata version 3.00 loaded.
[ 0.500593] usbcore: registered new interface driver usbfs
[ 0.500593] usbcore: registered new interface driver hub
[ 0.500593] usbcore: registered new device driver usb
[ 0.500593] PCI: Using ACPI for IRQ routing
[ 0.508009] Bluetooth: Core ver 2.13
[ 0.508021] NET: Registered protocol family 31
[ 0.508021] Bluetooth: HCI device and connection manager initialized
[ 0.508021] Bluetooth: HCI socket layer initialized
[ 0.508021] NET: Registered protocol family 8
[ 0.508021] NET: Registered protocol family 20
[ 0.508032] NetLabel: Initializing
[ 0.508033] NetLabel: domain hash size = 128
[ 0.508035] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.508048] NetLabel: unlabeled traffic allowed by default
[ 0.508061] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.508065] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.512060] AppArmor: AppArmor Filesystem Enabled
[ 0.516009] Switched to high resolution mode on CPU 0
[ 0.516598] Switched to high resolution mode on CPU 1
[ 0.520009] pnp: PnP ACPI init
[ 0.520017] ACPI: bus type pnp registered
[ 0.522415] pnp: PnP ACPI: found 12 devices
[ 0.522417] ACPI: ACPI bus type pnp unregistered
[ 0.522421] PnPBIOS: Disabled by ACPI PNP
[ 0.522433] system 00:06: ioport range 0x290-0x297 has been reserved
[ 0.522435] system 00:06: ioport range 0xc00-0xc05 has been reserved
[ 0.522438] system 00:06: ioport range 0xd00-0xd05 has been reserved
[ 0.522440] system 00:06: ioport range 0x480-0x48f has been reserved
[ 0.522442] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.522445] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.522447] system 00:06: ioport range 0x880-0x8ff has been reserved
[ 0.522450] system 00:06: ioport range 0xc00-0xc7f could not be reserved
[ 0.522452] system 00:06: ioport range 0x2000-0x20fe has been reserved
[ 0.522455] system 00:06: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.522458] system 00:06: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.522461] system 00:06: iomem range 0xffee0000-0xffefffff has been reserved
[ 0.522463] system 00:06: iomem range 0xfed10000-0xfed3ffff has been reserved
[ 0.522469] system 00:09: ioport range 0x250-0x253 has been reserved
[ 0.522472] system 00:09: ioport range 0x256-0x25f has been reserved
[ 0.522474] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.522477] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.522482] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.522487] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 0.522490] system 00:0b: iomem range 0xc0000-0xcffff could not be reserved
[ 0.522492] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[ 0.522495] system 00:0b: iomem range 0x100000-0xbfffffff could not be reserved
[ 0.522498] system 00:0b: iomem range 0xe0000000-0xffffffff could not be reserved
[ 0.557161] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.557164] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 0.557169] pci 0000:00:01.0: MEM window: 0xfa000000-0xfdefffff
[ 0.557174] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.557180] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02
[ 0.557182] pci 0000:00:06.0: IO window: disabled
[ 0.557188] pci 0000:00:06.0: MEM window: 0xfdf00000-0xfdffffff
[ 0.557192] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.557198] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 0.557201] pci 0000:00:07.0: IO window: 0xe000-0xefff
[ 0.557207] pci 0000:00:07.0: MEM window: 0xfe000000-0xfebfffff
[ 0.557211] pci 0000:00:07.0: PREFETCH window: 0x000000f6000000-0x000000f8ffffff
[ 0.557227] pci 0000:00:01.0: setting latency timer to 64
[ 0.557236] pci 0000:00:06.0: setting latency timer to 64
[ 0.557246] pci 0000:00:07.0: setting latency timer to 64
[ 0.557249] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.557251] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.557254] bus: 01 index 0 io port: [0xd000-0xdfff]
[ 0.557256] bus: 01 index 1 mmio: [0xfa000000-0xfdefffff]
[ 0.557258] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
[ 0.557260] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.557261] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.557263] bus: 02 index 1 mmio: [0xfdf00000-0xfdffffff]
[ 0.557265] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.557267] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.557269] bus: 03 index 0 io port: [0xe000-0xefff]
[ 0.557271] bus: 03 index 1 mmio: [0xfe000000-0xfebfffff]
[ 0.557273] bus: 03 index 2 mmio: [0xf6000000-0xf8ffffff]
[ 0.557275] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.557282] NET: Registered protocol family 2
[ 0.572050] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.572280] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.572803] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.573110] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.573112] TCP reno registered
[ 0.580072] NET: Registered protocol family 1
[ 0.580196] checking if image is initramfs... it is
[ 1.192748] Freeing initrd memory: 7371k freed
[ 1.192798] Simple Boot Flag at 0x71 set to 0x1
[ 1.193018] cpufreq: No nForce2 chipset.
[ 1.193182] audit: initializing netlink socket (disabled)
[ 1.193217] type=2000 audit(1248120712.192:1): initialized
[ 1.200718] highmem bounce pool size: 64 pages
[ 1.200724] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.202048] VFS: Disk quotas dquot_6.5.1
[ 1.202104] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.202695] fuse init (API version 7.10)
[ 1.202774] msgmni has been set to 1672
[ 1.202958] alg: No test for stdrng (krng)
[ 1.202968] io scheduler noop registered
[ 1.202970] io scheduler anticipatory registered
[ 1.202973] io scheduler deadline registered
[ 1.202985] io scheduler cfq registered (default)
[ 1.264048] pci 0000:01:00.0: Boot video device
[ 1.266223] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.266261] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.266294] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 1.266305] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.266372] pcieport-driver 0000:00:06.0: setting latency timer to 64
[ 1.266423] pcieport-driver 0000:00:06.0: found MSI capability
[ 1.266451] pcieport-driver 0000:00:06.0: irq 2302 for MSI/MSI-X
[ 1.266464] pci_express 0000:00:06.0:pcie00: allocate port service
[ 1.266533] pcieport-driver 0000:00:07.0: setting latency timer to 64
[ 1.266584] pcieport-driver 0000:00:07.0: found MSI capability
[ 1.266612] pcieport-driver 0000:00:07.0: irq 2301 for MSI/MSI-X
[ 1.266625] pci_express 0000:00:07.0:pcie00: allocate port service
[ 1.266636] pci_express 0000:00:07.0:pcie02: allocate port service
[ 1.266710] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.266942] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.267117] ACPI: AC Adapter [AC0] (on-line)
[ 1.267484] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 1.304709] ACPI: Battery Slot [BAT0] (battery present)
[ 1.304775] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.304778] ACPI: Power Button (FF) [PWRF]
[ 1.304829] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.304832] ACPI: Power Button (CM) [PWRB]
[ 1.304869] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.304875] ACPI: Sleep Button (CM) [SLPB]
[ 1.304914] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 1.314352] ACPI: Lid Switch [LID]
[ 1.314951] ACPI: SSDT BFFBE390, 0202 (r1 PmRef Cpu0Ist 3000 INTL 20051117)
[ 1.315406] ACPI: SSDT BFFBE630, 06D9 (r1 PmRef Cpu0Cst 3001 INTL 20051117)
[ 1.315955] Monitor-Mwait will be used to enter C-1 state
[ 1.315959] Monitor-Mwait will be used to enter C-2 state
[ 1.315975] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 1.315999] processor ACPI_CPU:00: registered as cooling_device0
[ 1.316008] ACPI: Processor [P001] (supports 8 throttling states)
[ 1.316368] ACPI: SSDT BFFBE2C0, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20051117)
[ 1.316766] ACPI: SSDT BFFBE5A0, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20051117)
[ 1.317371] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 1.317388] processor ACPI_CPU:01: registered as cooling_device1
[ 1.317392] ACPI: Processor [P002] (supports 8 throttling states)
[ 1.323089] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.324220] ACPI: Thermal Zone [THRM] (48 C)
[ 1.324267] isapnp: Scanning for PnP cards...
[ 1.677782] isapnp: No Plug & Play device found
[ 1.689232] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.690240] brd: module loaded
[ 1.690531] loop: module loaded
[ 1.690593] Fixed MDIO Bus: probed
[ 1.690599] PPP generic driver version 2.4.2
[ 1.690655] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 1.690681] Driver 'sd' needs updating - please use bus_type methods
[ 1.690689] Driver 'sr' needs updating - please use bus_type methods
[ 1.690832] sata_sis 0000:00:05.0: version 1.0
[ 1.690848] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.690853] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode
[ 1.690950] scsi0 : sata_sis
[ 1.691026] scsi1 : sata_sis
[ 1.691611] ata1: PATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 17
[ 1.691614] ata2: PATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 17
[ 1.900201] ata1.00: ATA-8: ST9500325AS, 0002SDM1, max UDMA/133
[ 1.900203] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.916591] ata1.00: configured for UDMA/133
[ 2.080219] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RR07, max UDMA/133
[ 2.096238] ata2.00: configured for UDMA/133
[ 2.098603] scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0002 PQ: 0 ANSI: 5
[ 2.098688] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 2.098703] sd 0:0:0:0: [sda] Write Protect is off
[ 2.098705] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.098728] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.098786] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 2.098799] sd 0:0:0:0: [sda] Write Protect is off
[ 2.098802] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.098823] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.098827] sda: sda1 sda2 sda3
[ 2.146445] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.146485] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.151027] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50N RR07 PQ: 0 ANSI: 5
[ 2.162220] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.162223] Uniform CD-ROM driver Revision: 3.20
[ 2.162303] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.162335] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.162715] pata_sis 0000:00:02.5: version 0.5.2
[ 2.162806] scsi2 : pata_sis
[ 2.162861] scsi3 : pata_sis
[ 2.163407] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfff0 irq 14
[ 2.163410] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfff8 irq 15
[ 2.316080] ata4: port disabled. ignoring.
[ 2.316178] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.316197] ehci_hcd 0000:00:03.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.316215] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 2.316268] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 2.316310] ehci_hcd 0000:00:03.3: irq 22, io mem 0xf9ffd000
[ 2.328008] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 2.328081] usb usb1: configuration #1 chosen from 1 choice
[ 2.328107] hub 1-0:1.0: USB hub found
[ 2.328114] hub 1-0:1.0: 8 ports detected
[ 2.328208] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.328221] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.328231] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 2.328274] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 2.328289] ohci_hcd 0000:00:03.0: irq 20, io mem 0xf9fff000
[ 2.386044] usb usb2: configuration #1 chosen from 1 choice
[ 2.386066] hub 2-0:1.0: USB hub found
[ 2.386074] hub 2-0:1.0: 4 ports detected
[ 2.386156] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.386166] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 2.386207] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 2.386226] ohci_hcd 0000:00:03.1: irq 21, io mem 0xf9ffe000
[ 2.442043] usb usb3: configuration #1 chosen from 1 choice
[ 2.442068] hub 3-0:1.0: USB hub found
[ 2.442075] hub 3-0:1.0: 4 ports detected
[ 2.442149] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.442218] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.445157] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.446746] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.446751] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.446754] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.446756] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.446758] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.449033] mice: PS/2 mouse device common for all mice
[ 2.469059] rtc_cmos 00:08: RTC can wake from S4
[ 2.469090] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 2.469110] rtc0: alarms up to one year, 114 bytes nvram, hpet irqs
[ 2.469161] device-mapper: uevent: version 1.0.3
[ 2.469238] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.469304] device-mapper: multipath: version 1.0.5 loaded
[ 2.469306] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.469371] EISA: Probing bus 0 at eisa.0
[ 2.469381] Cannot allocate resource for EISA slot 2
[ 2.469403] EISA: Detected 0 cards.
[ 2.469494] cpuidle: using governor ladder
[ 2.469576] cpuidle: using governor menu
[ 2.470051] TCP cubic registered
[ 2.470139] NET: Registered protocol family 10
[ 2.470539] lo: Disabled Privacy Extensions
[ 2.470852] NET: Registered protocol family 17
[ 2.470868] Bluetooth: L2CAP ver 2.11
[ 2.470869] Bluetooth: L2CAP socket layer initialized
[ 2.470872] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.470874] Bluetooth: SCO socket layer initialized
[ 2.470901] Bluetooth: RFCOMM socket layer initialized
[ 2.470907] Bluetooth: RFCOMM TTY layer initialized
[ 2.470909] Bluetooth: RFCOMM ver 1.10
[ 2.471203] Marking TSC unstable due to TSC halts in idle
[ 2.471381] Using IPI No-Shortcut mode
[ 2.471444] registered taskstats version 1
[ 2.471529] Magic number: 1:248:195
[ 2.471599] rtc_cmos 00:08: setting system clock to 2009-07-20 20:11:54 UTC (1248120714)
[ 2.471603] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.471604] EDD information not available.
[ 2.471891] Freeing unused kernel memory: 532k freed
[ 2.472017] Write protecting the kernel text: 4112k
[ 2.472060] Write protecting the kernel read-only data: 1524k
[ 2.507216] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.641027] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 2.889438] usb 1-5: configuration #1 chosen from 1 choice
[ 3.622833] PM: Starting manual resume from disk
[ 3.622837] PM: Resume from partition 8:6
[ 3.622838] PM: Checking hibernation image.
[ 3.624346] PM: Resume from disk failed.
[ 3.659039] EXT4-fs: barriers enabled
[ 3.681135] kjournald2 starting. Commit interval 5 seconds
[ 3.681148] EXT4-fs: delayed allocation enabled
[ 3.681151] EXT4-fs: file extents enabled
[ 3.697315] EXT4-fs: mballoc enabled
[ 3.697319] EXT4-fs: mounted filesystem with ordered data mode.
[ 8.177320] udev: starting version 141
[ 8.555321] asus-laptop: Asus Laptop Support version 0.42
[ 8.560576] asus-laptop: F50SV model detected
[ 8.566603] asus-laptop: Brightness ignored, must be controlled by ACPI video driver
[ 8.631095] Linux video capture interface: v2.00
[ 8.666187] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[ 8.667786] input: CNF7129 as /devices/pci0000:00/0000:00:03.3/usb1/1-5/1-5:1.0/input/input6
[ 8.668147] usbcore: registered new interface driver uvcvideo
[ 8.668183] USB Video Class driver (v0.1.0)
[ 8.732452] acpi device:19: registered as cooling_device2
[ 8.732593] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:15/device:16/input/input7
[ 8.739241] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 8.779163] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 8.860064] cfg80211: Calling CRDA to update world regulatory domain
[ 8.959000] Linux agpgart interface v0.103
[ 9.058640] cfg80211: World regulatory domain updated:
[ 9.058644] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.058647] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.058649] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.058651] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.058653] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.058655] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.067407] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 9.583825] sis190 Gigabit Ethernet driver 1.2 loaded.
[ 9.583850] sis190 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 9.583861] sis190 0000:00:04.0: setting latency timer to 64
[ 9.584046] 0000:00:04.0: Read MAC address from EEPROM
[ 9.584049] 0000:00:04.0: Error EEPROM read 0.
[ 9.584052] 0000:00:04.0: Read MAC address from APC.
[ 9.617570] 0000:00:04.0: Unknown PHY transceiver at address 0.
[ 9.729472] nvidia: module license 'NVIDIA' taints kernel.
[ 9.796268] ath9k: 0.1
[ 9.796322] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.796334] ath9k 0000:02:00.0: setting latency timer to 64
[ 9.985313] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.985321] nvidia 0000:01:00.0: setting latency timer to 64
[ 9.985509] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 10.163065] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[ 10.210170] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 10.233679] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 10.358769] Registered led device: ath9k-phy0:radio
[ 10.358787] Registered led device: ath9k-phy0:assoc
[ 10.358804] Registered led device: ath9k-phy0:tx
[ 10.358819] Registered led device: ath9k-phy0:rx
[ 10.359310] phy0: Atheros 9280: mem=0xf7d80000, irq=16
[ 10.376027] 0000:00:04.0: Using transceiver at address 1 as default.
[ 10.408825] 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f7ecec00 (IRQ: 19), 00:24:8c:92:84:d9
[ 10.408828] eth0: RGMII mode.
[ 10.408835] eth0: Enabling Auto-negotiation.
[ 10.440531] HDA Intel 0000:00:0f.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.440622] HDA Intel 0000:00:0f.0: setting latency timer to 64
[ 10.644633] lp: driver loaded but no devices found
[ 10.714405] Adding 21029044k swap on /dev/sda6. Priority:-1 extents:1 across:21029044k
[ 11.329906] EXT4 FS on sda5, internal journal on sda5:8
[ 12.453748] type=1505 audit(1248113524.480:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1986
[ 12.497318] type=1505 audit(1248113524.524:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1990
[ 12.497439] type=1505 audit(1248113524.524:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1990
[ 12.497490] type=1505 audit(1248113524.524:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1990
[ 12.497528] type=1505 audit(1248113524.524:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1990
[ 12.619054] type=1505 audit(1248113524.645:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1995
[ 12.619325] type=1505 audit(1248113524.645:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1995
[ 12.645363] type=1505 audit(1248113524.673:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1999
[ 15.524791] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 15.524795] vboxdrv: Successfully done.
[ 15.524796] vboxdrv: Found 2 processor cores.
[ 15.525755] vboxdrv: fAsync=0 offMin=0x186 offMax=0x2a8a
[ 15.525801] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 15.525803] vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009).
[ 16.276030] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.276033] Bluetooth: BNEP filters: protocol multicast
[ 16.309706] Bridge firewalling registered
[ 18.092396] ppdev: user-space parallel port driver
e per quanto riguarda i wireress scusa la mia ignoranza ma nn so come si vede. :-[ :-[
« Si dice che il minimo battito d’ali di una farfalla sia in grado di provocare un uragano dall’altra parte del mondo »
Re: mal funzionamento del sistema
prova così sostituisci Data ora con la data e l'ora in cui è avvenuto il blocco. Ad esempio se è avvenuto oggi tra le 12:14 e le 12:15 fai così così trova tutte le righe contenenti la stringa "Jul 21 12:1". Se vuoi fare da interfaccia grafica basta che dai cerchi le righe giuste e le copi qua (non tutto perchè è enorme il file).
La prossima volta che devi postare un testo così lungo racchiudilo nelle tag code (pulsante # nella schermata dove si scrive il messaggio)
Codice: Seleziona tutto
sudo cat /var/logsyslog | grep "Data ora"Codice: Seleziona tutto
sudo cat /var/logsyslog | grep "Jul 21 12:1"Codice: Seleziona tutto
sudo gedit /var/log/syslogLa prossima volta che devi postare un testo così lungo racchiudilo nelle tag code (pulsante # nella schermata dove si scrive il messaggio)
http://petition.stopsoftwarepatents.eu/
d95555c36aeeee715c0a34ce1e4dd713
d95555c36aeeee715c0a34ce1e4dd713
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 5 ospiti
