Crash on Compaq Presario 700
Crash on Compaq Presario 700
Buongiorno,
avrei un problema di crash di Ubuntu 9.04(aggiornato) con il mio Compaq Presario 700.
Mi spiego meglio: quando dico crash intendo che si freeza lo schermo. Il cursore del mouse non risponde e nemmeno la tastiera. Non ricevo alcun messaggio di avviso o errore, tutto resta immobile.
Ho notato che ciò accade quasi sempre(ma non sempre) quando sto usando il browser(uso Epiphany) e ci sono periodi in cui accade di frequente(come da ieri pomeriggio) e periodi in cui non ho di questi problemi.
Dimenticavo...quando avevo XP installato qui sopra dava ogni tanto anche lui un problema simile.
C'è qualcosa che posso fare(tipo scansioni ecc..)?
PS: faccio notare che il pc è molto vecchio. Ha la batteria, ma non funziona più(va solo da corrente); non va il clock(a ogni riavvio devo reimpostare data e ora) e spesso quando appare la barra di caricamento di Ubuntu mi fa un Routine Check del disco(anche se non mi ha mai trovato niente di strano)
avrei un problema di crash di Ubuntu 9.04(aggiornato) con il mio Compaq Presario 700.
Mi spiego meglio: quando dico crash intendo che si freeza lo schermo. Il cursore del mouse non risponde e nemmeno la tastiera. Non ricevo alcun messaggio di avviso o errore, tutto resta immobile.
Ho notato che ciò accade quasi sempre(ma non sempre) quando sto usando il browser(uso Epiphany) e ci sono periodi in cui accade di frequente(come da ieri pomeriggio) e periodi in cui non ho di questi problemi.
Dimenticavo...quando avevo XP installato qui sopra dava ogni tanto anche lui un problema simile.
C'è qualcosa che posso fare(tipo scansioni ecc..)?
PS: faccio notare che il pc è molto vecchio. Ha la batteria, ma non funziona più(va solo da corrente); non va il clock(a ogni riavvio devo reimpostare data e ora) e spesso quando appare la barra di caricamento di Ubuntu mi fa un Routine Check del disco(anche se non mi ha mai trovato niente di strano)
- DjNeophyte
- Entusiasta Emergente

- Messaggi: 2328
- Iscrizione: venerdì 12 dicembre 2008, 10:48
- Località: Ponte Nelle Alpi ( BL )
Re: Crash on Compaq Presario 700
Potresti per cortesia postare le specifiche della macchina? Perche' se e' molto vecchio forse con jaunty arranca,potresti provare con lxde.Non vorrei mai pero' che potesse essere un problema hardware,fatto un test S.M.A.R.T. al disco?
Re: Crash on Compaq Presario 700
Specifiche:
Velocità del processore: 1,2 GHz
Tipo di chip: AMD Athlon
Hard Disk: 20 GB
Memoria (RAM): 256 MB
Serve altro?
Cos'è il test SMART? Temo proprio che sia un problema hardware
Velocità del processore: 1,2 GHz
Tipo di chip: AMD Athlon
Hard Disk: 20 GB
Memoria (RAM): 256 MB
Serve altro?
Cos'è il test SMART? Temo proprio che sia un problema hardware
- DjNeophyte
- Entusiasta Emergente

- Messaggi: 2328
- Iscrizione: venerdì 12 dicembre 2008, 10:48
- Località: Ponte Nelle Alpi ( BL )
Re: Crash on Compaq Presario 700
La ram in se e' un po' risicata,s.m.a.r.t. in parole povere e' un test della meccanica ed elettronica del disco : http://en.wikipedia.org/wiki/S.M.A.R.T. ora vedo se riesco a trovare qualcosa di simile per eseguirlo in ambiente linux.
- DjNeophyte
- Entusiasta Emergente

- Messaggi: 2328
- Iscrizione: venerdì 12 dicembre 2008, 10:48
- Località: Ponte Nelle Alpi ( BL )
Re: Crash on Compaq Presario 700
Ho installato il pacchetto.
Se vado nell' Error Log trovo questo:
EDIT:
Finito. Il log dice solo:
Se vado nell' Error Log trovo questo:
Ora sto facendo il Perform Test(extended). Appena finisco posto il log anche di quello.Complete error log:
SMART Error Log Version: 1
ATA Error Count: 127 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 127 occurred at disk power-on lifetime: 1077 hours (44 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 4a 28 1f e0 Error: UNC 5 sectors at LBA = 0x001f284a = 2041930
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 d8 08 47 28 1f e0 00 00:00:46.050 READ DMA
c8 d8 08 47 28 1f e0 00 00:00:43.790 READ DMA
c8 d8 08 37 28 1f e0 00 00:00:43.790 READ DMA
c8 d8 08 2f 28 1f e0 00 00:00:43.770 READ DMA
c8 d8 08 c7 18 4e e0 00 00:00:43.760 READ DMA
Error 126 occurred at disk power-on lifetime: 1077 hours (44 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 4a 28 1f e0 Error: UNC 5 sectors at LBA = 0x001f284a = 2041930
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 d8 08 47 28 1f e0 00 00:00:43.790 READ DMA
c8 d8 08 37 28 1f e0 00 00:00:43.790 READ DMA
c8 d8 08 2f 28 1f e0 00 00:00:43.770 READ DMA
c8 d8 08 c7 18 4e e0 00 00:00:43.760 READ DMA
c8 d8 08 3f 00 20 e0 00 00:00:43.750 READ DMA
Error 125 occurred at disk power-on lifetime: 666 hours (27 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 7f dd f5 e0 Error: UNC 8 sectors at LBA = 0x00f5dd7f = 16113023
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 7f dd f5 e0 00 01:06:17.700 READ DMA
ca 00 08 6f 80 c1 e0 00 01:06:17.700 WRITE DMA
ca 00 08 37 00 20 e0 00 01:06:17.700 WRITE DMA
ca 00 18 77 56 1f e0 00 01:06:17.700 WRITE DMA
c8 00 01 00 00 00 e0 00 01:06:17.640 READ DMA
Error 124 occurred at disk power-on lifetime: 666 hours (27 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 7f dd f5 e0 Error: UNC 8 sectors at LBA = 0x00f5dd7f = 16113023
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 7f dd f5 e0 00 01:06:15.510 READ DMA
ca 00 10 27 a1 3b e0 00 01:06:15.500 WRITE DMA
ca 00 80 af 2e 31 e0 00 01:06:15.500 WRITE DMA
ca 00 08 3f 28 1f e0 00 01:06:15.500 WRITE DMA
c8 00 08 7f dd f5 e0 00 01:06:13.360 READ DMA
Error 123 occurred at disk power-on lifetime: 666 hours (27 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 7f dd f5 e0 Error: UNC 8 sectors at LBA = 0x00f5dd7f = 16113023
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 7f dd f5 e0 00 01:06:13.360 READ DMA
ca 00 01 0f a8 40 e0 00 01:06:13.360 WRITE DMA
ca 00 80 2f 2e 31 e0 00 01:06:13.350 WRITE DMA
e7 00 00 00 00 00 a0 00 01:06:13.330 FLUSH CACHE
ca 00 10 e7 f0 ff e0 00 01:06:13.330 WRITE DMA
EDIT:
Finito. Il log dice solo:
Complete selective self-test log:
Device does not support Selective Self Tests/Logging
Ultima modifica di lawolf il martedì 21 luglio 2009, 16:38, modificato 1 volta in totale.
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 5 ospiti