Crash on Compaq Presario 700

Riconoscimento, installazione e configurazione delle periferiche.
lawolf
Prode Principiante
Messaggi: 6
Iscrizione: sabato 2 maggio 2009, 10:21

Crash on Compaq Presario 700

Messaggio da lawolf »

Buongiorno,
avrei un problema di crash di Ubuntu 9.04(aggiornato) con il mio Compaq Presario 700.

Mi spiego meglio: quando dico crash intendo che si freeza lo schermo. Il cursore del mouse non risponde e nemmeno la tastiera. Non ricevo alcun messaggio di avviso o errore, tutto resta immobile.

Ho notato che ciò accade quasi sempre(ma non sempre) quando sto usando il browser(uso Epiphany) e ci sono periodi in cui accade di frequente(come da ieri pomeriggio) e periodi in cui non ho di questi problemi.

Dimenticavo...quando avevo XP installato qui sopra dava ogni tanto anche lui un problema simile.

C'è qualcosa che posso fare(tipo scansioni ecc..)?

PS: faccio notare che il pc è molto vecchio. Ha la batteria, ma non funziona più(va solo da corrente); non va il clock(a ogni riavvio devo reimpostare data e ora) e spesso quando appare la barra di caricamento di Ubuntu mi fa un Routine Check del disco(anche se non mi ha mai trovato niente di strano)
Avatar utente
DjNeophyte
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 2328
Iscrizione: venerdì 12 dicembre 2008, 10:48
Località: Ponte Nelle Alpi ( BL )

Re: Crash on Compaq Presario 700

Messaggio da DjNeophyte »

Potresti per cortesia postare le specifiche della macchina? Perche' se e' molto vecchio forse con jaunty arranca,potresti provare con lxde.Non vorrei mai pero' che potesse essere un problema hardware,fatto un test S.M.A.R.T. al disco?
lawolf
Prode Principiante
Messaggi: 6
Iscrizione: sabato 2 maggio 2009, 10:21

Re: Crash on Compaq Presario 700

Messaggio da lawolf »

Specifiche:
Velocità del processore: 1,2 GHz
Tipo di chip: AMD Athlon
Hard Disk: 20 GB
Memoria (RAM): 256 MB

Serve altro?
Cos'è il test SMART? Temo proprio che sia un problema hardware
Avatar utente
DjNeophyte
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 2328
Iscrizione: venerdì 12 dicembre 2008, 10:48
Località: Ponte Nelle Alpi ( BL )

Re: Crash on Compaq Presario 700

Messaggio da DjNeophyte »

La ram in se e' un po' risicata,s.m.a.r.t. in parole povere e' un test della meccanica ed elettronica del disco : http://en.wikipedia.org/wiki/S.M.A.R.T. ora vedo se riesco a trovare qualcosa di simile per eseguirlo in ambiente linux.
Avatar utente
DjNeophyte
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 2328
Iscrizione: venerdì 12 dicembre 2008, 10:48
Località: Ponte Nelle Alpi ( BL )

Re: Crash on Compaq Presario 700

Messaggio da DjNeophyte »

lawolf
Prode Principiante
Messaggi: 6
Iscrizione: sabato 2 maggio 2009, 10:21

Re: Crash on Compaq Presario 700

Messaggio da lawolf »

Ho installato il pacchetto.
Se vado nell' Error Log trovo questo:
Complete error log:

SMART Error Log Version: 1
ATA Error Count: 127 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 127 occurred at disk power-on lifetime: 1077 hours (44 days + 21 hours)
 When the command that caused the error occurred, the device was active or idle.

 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 40 51 05 4a 28 1f e0  Error: UNC 5 sectors at LBA = 0x001f284a = 2041930

 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
 -- -- -- -- -- -- -- --  ----------------  --------------------
 c8 d8 08 47 28 1f e0 00      00:00:46.050  READ DMA
 c8 d8 08 47 28 1f e0 00      00:00:43.790  READ DMA
 c8 d8 08 37 28 1f e0 00      00:00:43.790  READ DMA
 c8 d8 08 2f 28 1f e0 00      00:00:43.770  READ DMA
 c8 d8 08 c7 18 4e e0 00      00:00:43.760  READ DMA

Error 126 occurred at disk power-on lifetime: 1077 hours (44 days + 21 hours)
 When the command that caused the error occurred, the device was active or idle.

 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 40 51 05 4a 28 1f e0  Error: UNC 5 sectors at LBA = 0x001f284a = 2041930

 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
 -- -- -- -- -- -- -- --  ----------------  --------------------
 c8 d8 08 47 28 1f e0 00      00:00:43.790  READ DMA
 c8 d8 08 37 28 1f e0 00      00:00:43.790  READ DMA
 c8 d8 08 2f 28 1f e0 00      00:00:43.770  READ DMA
 c8 d8 08 c7 18 4e e0 00      00:00:43.760  READ DMA
 c8 d8 08 3f 00 20 e0 00      00:00:43.750  READ DMA

Error 125 occurred at disk power-on lifetime: 666 hours (27 days + 18 hours)
 When the command that caused the error occurred, the device was active or idle.

 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 40 51 08 7f dd f5 e0  Error: UNC 8 sectors at LBA = 0x00f5dd7f = 16113023

 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
 -- -- -- -- -- -- -- --  ----------------  --------------------
 c8 00 08 7f dd f5 e0 00      01:06:17.700  READ DMA
 ca 00 08 6f 80 c1 e0 00      01:06:17.700  WRITE DMA
 ca 00 08 37 00 20 e0 00      01:06:17.700  WRITE DMA
 ca 00 18 77 56 1f e0 00      01:06:17.700  WRITE DMA
 c8 00 01 00 00 00 e0 00      01:06:17.640  READ DMA

Error 124 occurred at disk power-on lifetime: 666 hours (27 days + 18 hours)
 When the command that caused the error occurred, the device was active or idle.

 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 40 51 08 7f dd f5 e0  Error: UNC 8 sectors at LBA = 0x00f5dd7f = 16113023

 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
 -- -- -- -- -- -- -- --  ----------------  --------------------
 c8 00 08 7f dd f5 e0 00      01:06:15.510  READ DMA
 ca 00 10 27 a1 3b e0 00      01:06:15.500  WRITE DMA
 ca 00 80 af 2e 31 e0 00      01:06:15.500  WRITE DMA
 ca 00 08 3f 28 1f e0 00      01:06:15.500  WRITE DMA
 c8 00 08 7f dd f5 e0 00      01:06:13.360  READ DMA

Error 123 occurred at disk power-on lifetime: 666 hours (27 days + 18 hours)
 When the command that caused the error occurred, the device was active or idle.

 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 40 51 08 7f dd f5 e0  Error: UNC 8 sectors at LBA = 0x00f5dd7f = 16113023

 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
 -- -- -- -- -- -- -- --  ----------------  --------------------
 c8 00 08 7f dd f5 e0 00      01:06:13.360  READ DMA
 ca 00 01 0f a8 40 e0 00      01:06:13.360  WRITE DMA
 ca 00 80 2f 2e 31 e0 00      01:06:13.350  WRITE DMA
 e7 00 00 00 00 00 a0 00      01:06:13.330  FLUSH CACHE
 ca 00 10 e7 f0 ff e0 00      01:06:13.330  WRITE DMA
Ora sto facendo il Perform Test(extended). Appena finisco posto il log anche di quello.

EDIT:

Finito. Il log dice solo:
Complete selective self-test log:

Device does not support Selective Self Tests/Logging
Ultima modifica di lawolf il martedì 21 luglio 2009, 16:38, modificato 1 volta in totale.
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 6 ospiti