[Video] Scheda tv Pinnacle e330 Ubuntu 9.04

Riconoscimento, installazione e configurazione delle periferiche.
Scrivi risposta
BBC One
Prode Principiante
Messaggi: 126
Iscrizione: martedì 4 novembre 2008, 21:13

[Video] Scheda tv Pinnacle e330 Ubuntu 9.04

Messaggio da BBC One »

Come faccio a far funzionare questa chiavetta?
When you will discover that windows sucks it will be too late...
BBC One
Prode Principiante
Messaggi: 126
Iscrizione: martedì 4 novembre 2008, 21:13

Re: [Video] Scheda tv Pinnacle e330 Ubuntu 9.04

Messaggio da BBC One »

La prima va anche sulla 9.04
When you will discover that windows sucks it will be too late...
BBC One
Prode Principiante
Messaggi: 126
Iscrizione: martedì 4 novembre 2008, 21:13

Re: [Video] Scheda tv Pinnacle e330 Ubuntu 9.04

Messaggio da BBC One »

Nella prima guida quando arriva a questo punto

scarichiamo i driver necessari:
hg clone http://mcentral.de/hg/~mrec/v4l-dvb-experimental

e scrivo quel comando nel terminale, questo è l'output:

root@bbc-laptop:/usr/src# hg clone http://mcentral.de/hg/~mrec/v4l-dvb-experimental
abort: HTTP Error 500: Internal Server Error

Per adesso provo con la seconda.
When you will discover that windows sucks it will be too late...
BBC One
Prode Principiante
Messaggi: 126
Iscrizione: martedì 4 novembre 2008, 21:13

Re: [Video] Scheda tv Pinnacle e330 Ubuntu 9.04

Messaggio da BBC One »

Nella seconda guida, appensa inizia lui da il comando dmesg per vedere se la scheda è riconosciuta.
Io come faccio a sapere se è riconosciuta?
Vi posto il mio dmesg:

Codice: Seleziona tutto

[ 2596.490959] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 1
[ 2596.689061] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 2
[ 2596.888108] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 3
[ 2597.089076] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 timed out
[ 2608.295817] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 1
[ 2608.492106] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 2
[ 2608.693586] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 3
[ 2608.893092] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 timed out
[ 2620.078198] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 1
[ 2620.277055] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 2
[ 2620.477077] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 3
[ 2620.677058] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 timed out
[ 2631.854612] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 1
[ 2631.856594] wlan0 direct probe responded
[ 2631.856606] wlan0: authenticate with AP 00:22:b0:ae:2c:e1
[ 2631.858430] wlan0: authenticated
[ 2631.858439] wlan0: associate with AP 00:22:b0:ae:2c:e1
[ 2631.860740] wlan0: RX AssocResp from 00:22:b0:ae:2c:e1 (capab=0x411 status=0 aid=2)
[ 2631.860747] wlan0: associated
[ 2631.862928] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2642.713054] wlan0: no IPv6 routers present
[ 2661.860090] wlan0: No ProbeResp from current AP 00:22:b0:ae:2c:e1 - assume out of range
[ 2663.761655] wlan0: authenticate with AP 00:22:b0:ae:2c:e1
[ 2663.763199] wlan0: authenticated
[ 2663.763207] wlan0: associate with AP 00:22:b0:ae:2c:e1
[ 2663.766119] wlan0: RX ReassocResp from 00:22:b0:ae:2c:e1 (capab=0x411 status=0 aid=2)
[ 2663.766126] wlan0: associated
[ 2683.765079] wlan0: No ProbeResp from current AP 00:22:b0:ae:2c:e1 - assume out of range
[ 2685.665636] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 1
[ 2685.864074] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 2
[ 2686.064080] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 3
[ 2686.264074] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 timed out
[ 2697.449594] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 1
[ 2697.648093] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 2
[ 2697.848074] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 3
[ 2698.048073] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 timed out
[ 2709.233596] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 1
[ 2709.432078] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 2
[ 2709.633084] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 3
[ 2709.833081] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 timed out
[ 2721.017593] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 1
[ 2721.216077] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 2
[ 2721.416075] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 3
[ 2721.616085] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 timed out
[ 2732.809609] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 1
[ 2733.008068] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 2
[ 2733.009963] wlan0 direct probe responded
[ 2733.009971] wlan0: authenticate with AP 00:22:b0:ae:2c:e1
[ 2733.011767] wlan0: authenticated
[ 2733.011774] wlan0: associate with AP 00:22:b0:ae:2c:e1
[ 2733.014372] wlan0: RX ReassocResp from 00:22:b0:ae:2c:e1 (capab=0x411 status=0 aid=2)
[ 2733.014378] wlan0: associated
[ 2831.020093] wlan0: No ProbeResp from current AP 00:22:b0:ae:2c:e1 - assume out of range
[ 2832.929560] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 1
[ 2833.128073] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 2
[ 2833.328072] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 3
[ 2833.529066] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 timed out
[ 2844.725651] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 1
[ 2844.924080] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 2
[ 2845.124072] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 3
[ 2845.324071] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 timed out
[ 2856.517687] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 1
[ 2856.716080] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 2
[ 2856.916085] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 3
[ 2857.116075] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 timed out
[ 2868.297591] wlan0: authenticate with AP 00:22:b0:ae:2c:e1
[ 2868.497406] wlan0: authenticate with AP 00:22:b0:ae:2c:e1
[ 2868.696089] wlan0: authenticate with AP 00:22:b0:ae:2c:e1
[ 2868.896075] wlan0: authentication with AP 00:22:b0:ae:2c:e1 timed out
[ 2880.085576] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 1
[ 2880.284074] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 2
[ 2880.484093] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 3
[ 2880.684087] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 timed out
[ 2886.813252] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2886.962933] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2888.761632] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 1
[ 2888.960076] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 2
[ 2889.160106] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 3
[ 2889.360106] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 timed out
[ 2900.541646] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 1
[ 2900.740063] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 2
[ 2900.741971] wlan0 direct probe responded
[ 2900.741979] wlan0: authenticate with AP 00:22:b0:ae:2c:e1
[ 2900.743757] wlan0: authenticated
[ 2900.743764] wlan0: associate with AP 00:22:b0:ae:2c:e1
[ 2900.746218] wlan0: RX AssocResp from 00:22:b0:ae:2c:e1 (capab=0x411 status=0 aid=2)
[ 2900.746224] wlan0: associated
[ 2900.746874] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2911.708069] wlan0: no IPv6 routers present
[ 3279.776091] wlan0: No ProbeResp from current AP 00:22:b0:ae:2c:e1 - assume out of range
[ 3281.713628] wlan0: authenticate with AP 00:22:b0:ae:2c:e1
[ 3281.912073] wlan0: authenticate with AP 00:22:b0:ae:2c:e1
[ 3282.112089] wlan0: authenticate with AP 00:22:b0:ae:2c:e1
[ 3282.312091] wlan0: authentication with AP 00:22:b0:ae:2c:e1 timed out
[ 3292.679134] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3292.840302] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3294.665633] wlan0: authenticate with AP 00:22:b0:ae:2c:e1
[ 3294.670049] wlan0: authenticated
[ 3294.670065] wlan0: associate with AP 00:22:b0:ae:2c:e1
[ 3294.672158] wlan0: RX AssocResp from 00:22:b0:ae:2c:e1 (capab=0x411 status=0 aid=2)
[ 3294.672165] wlan0: associated
[ 3294.672825] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3305.437048] wlan0: no IPv6 routers present
[ 4488.725092] wlan0: No ProbeResp from current AP 00:22:b0:ae:2c:e1 - assume out of range
[ 4490.641643] wlan0: authenticate with AP 00:22:b0:ae:2c:e1
[ 4490.643220] wlan0: authenticated
[ 4490.643229] wlan0: associate with AP 00:22:b0:ae:2c:e1
[ 4490.645539] wlan0: RX ReassocResp from 00:22:b0:ae:2c:e1 (capab=0x411 status=0 aid=2)
[ 4490.645551] wlan0: associated
[ 4666.645049] wlan0: No ProbeResp from current AP 00:22:b0:ae:2c:e1 - assume out of range
[ 4668.546915] wlan0: authenticate with AP 00:22:b0:ae:2c:e1
[ 4668.744070] wlan0: authenticate with AP 00:22:b0:ae:2c:e1
[ 4668.944107] wlan0: authenticate with AP 00:22:b0:ae:2c:e1
[ 4669.144075] wlan0: authentication with AP 00:22:b0:ae:2c:e1 timed out
[ 4680.357612] wlan0: direct probe to AP 00:22:b0:ae:2c:e1 try 1
[ 4680.360402] wlan0 direct probe responded
[ 4680.360415] wlan0: authenticate with AP 00:22:b0:ae:2c:e1
[ 4680.362178] wlan0: authenticated
[ 4680.362186] wlan0: associate with AP 00:22:b0:ae:2c:e1
[ 4680.364382] wlan0: RX ReassocResp from 00:22:b0:ae:2c:e1 (capab=0x411 status=0 aid=2)
[ 4680.364389] wlan0: associated
[ 8307.121402] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 9778.596084] wlan0: No ProbeResp from current AP 00:22:b0:ae:2c:e1 - assume out of range
[ 9780.602695] wlan0: authenticate with AP 00:22:b0:ae:2c:e1
[ 9780.604269] wlan0: authenticated
[ 9780.604279] wlan0: associate with AP 00:22:b0:ae:2c:e1
[ 9780.607232] wlan0: RX ReassocResp from 00:22:b0:ae:2c:e1 (capab=0x411 status=0 aid=2)
[ 9780.607239] wlan0: associated
[13233.589090] usb 1-8: new high speed USB device using ehci_hcd and address 2
[13233.729463] usb 1-8: configuration #1 chosen from 1 choice
[13234.737857] Linux video capture interface: v2.00
[13234.772329] em28xx v4l2 driver version 0.1.0 loaded
[13234.772390] em28xx new video device (2304:0226): interface 0, class 255
[13234.772404] em28xx Doesn't have usb audio class
[13234.772409] em28xx #0: Alternate settings: 8
[13234.772414] em28xx #0: Alternate setting 0, max size= 0
[13234.772419] em28xx #0: Alternate setting 1, max size= 0
[13234.772425] em28xx #0: Alternate setting 2, max size= 1448
[13234.772430] em28xx #0: Alternate setting 3, max size= 2048
[13234.772435] em28xx #0: Alternate setting 4, max size= 2304
[13234.772440] em28xx #0: Alternate setting 5, max size= 2580
[13234.772445] em28xx #0: Alternate setting 6, max size= 2892
[13234.772450] em28xx #0: Alternate setting 7, max size= 3072
[13234.772737] em28xx #0: chip ID is em2882/em2883
[13234.961652] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 26 02 d0 12 5c 03 8e 16 a4 1c
[13234.961677] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[13234.961698] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00
[13234.961719] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[13234.961738] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[13234.961758] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[13234.961777] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00
[13234.961797] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
[13234.961816] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03
[13234.961836] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 33 00 33 00 30 00
[13234.961856] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 37 00 31 00 30 00 30 00
[13234.961876] em28xx #0: i2c eeprom b0: 31 00 31 00 32 00 35 00 39 00 39 00 38 00 00 00
[13234.961896] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[13234.961915] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[13234.961935] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[13234.961954] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[13234.961977] EEPROM ID= 0x9567eb1a, hash = 0x73b3a1bf
[13234.961982] Vendor/Product ID= 2304:0226
[13234.961986] AC97 audio (5 sample rates)
[13234.961990] 500mA max power
[13234.961994] Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
[13234.962000] em28xx #0: 
[13234.962002] 
[13234.962008] em28xx #0: The support for this board weren't valid yet.
[13234.962013] em28xx #0: Please send a report of having this working
[13234.962018] em28xx #0: not to V4L mailing list (and/or to other addresses)
[13234.962022] 
[13235.068658] tuner' 1-0061: chip found @ 0xc2 (em28xx #0)
[13235.132381] xc2028 1-0061: creating new instance
[13235.132390] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[13235.132417] i2c-adapter i2c-1: firmware: requesting xc3028-v27.fw
[13235.250475] xc2028 1-0061: Error: firmware xc3028-v27.fw not found.
[13235.341576] tvp5150 1-005c: tvp5150am1 detected.
[13235.494528] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[13235.494538] em28xx #0: Found Pinnacle Hybrid Pro (2)
[13235.494589] usbcore: registered new interface driver em28xx
[13235.653358] em28xx-audio.c: probing for em28x1 non standard usbaudio
[13235.653366] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[13235.654034] Em28xx: Initialized (Em28xx Audio Extension) extension
[13239.252853] usb 1-8: USB disconnect, address 2
[13239.255561] em28xx #0: disconnecting em28xx #0 video
[13239.255572] em28xx #0: V4L2 devices /dev/video0 and /dev/vbi0 deregistered
[13239.255756] xc2028 1-0061: destroying instance
[13303.153280] UDF-fs: No VRS found
[13303.170721] ISO 9660 Extensions: Microsoft Joliet Level 3
[13303.172513] ISOFS: changing to secondary root
[13356.689422] Too big adjustment 32
[13849.100074] usb 1-8: new high speed USB device using ehci_hcd and address 3
[13849.249885] usb 1-8: configuration #1 chosen from 1 choice
[13849.250149] em28xx new video device (2304:0226): interface 0, class 255
[13849.250162] em28xx Doesn't have usb audio class
[13849.250167] em28xx #0: Alternate settings: 8
[13849.250173] em28xx #0: Alternate setting 0, max size= 0
[13849.250178] em28xx #0: Alternate setting 1, max size= 0
[13849.250184] em28xx #0: Alternate setting 2, max size= 1448
[13849.250189] em28xx #0: Alternate setting 3, max size= 2048
[13849.250195] em28xx #0: Alternate setting 4, max size= 2304
[13849.250200] em28xx #0: Alternate setting 5, max size= 2580
[13849.250205] em28xx #0: Alternate setting 6, max size= 2892
[13849.250211] em28xx #0: Alternate setting 7, max size= 3072
[13849.250517] em28xx #0: chip ID is em2882/em2883
[13849.423560] tuner' 1-0061: chip found @ 0xc2 (em28xx #0)
[13849.456185] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 26 02 d0 12 5c 03 8e 16 a4 1c
[13849.456210] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[13849.456231] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00
[13849.456251] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[13849.456270] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[13849.456289] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[13849.456309] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00
[13849.456328] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
[13849.456348] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03
[13849.456367] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 33 00 33 00 30 00
[13849.456387] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 37 00 31 00 30 00 30 00
[13849.456407] em28xx #0: i2c eeprom b0: 31 00 31 00 32 00 35 00 39 00 39 00 38 00 00 00
[13849.456426] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[13849.456445] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[13849.456464] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[13849.456483] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[13849.456506] EEPROM ID= 0x9567eb1a, hash = 0x73b3a1bf
[13849.456511] Vendor/Product ID= 2304:0226
[13849.456515] AC97 audio (5 sample rates)
[13849.456520] 500mA max power
[13849.456524] Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
[13849.456529] em28xx #0: 
[13849.456531] 
[13849.456537] em28xx #0: The support for this board weren't valid yet.
[13849.456542] em28xx #0: Please send a report of having this working
[13849.456548] em28xx #0: not to V4L mailing list (and/or to other addresses)
[13849.456551] 
[13849.470506] xc2028 1-0061: creating new instance
[13849.470515] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[13849.470535] i2c-adapter i2c-1: firmware: requesting xc3028-v27.fw
[13849.476642] xc2028 1-0061: Error: firmware xc3028-v27.fw not found.
[13849.573572] tvp5150 1-005c: tvp5150am1 detected.
[13849.725675] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[13849.725685] em28xx-audio.c: probing for em28x1 non standard usbaudio
[13849.725691] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[13849.726356] em28xx #0: Found Pinnacle Hybrid Pro (2)
[13849.924486] tvp5150 1-005c: tvp5150am1 detected.
[13964.567444] usb 1-8: USB disconnect, address 3
[13964.572082] em28xx #0: disconnecting em28xx #0 video
[13964.572094] em28xx #0: V4L2 devices /dev/video0 and /dev/vbi0 deregistered
[13964.572268] xc2028 1-0061: destroying instance
[13964.817990] hub 1-0:1.0: unable to enumerate USB device on port 8
[13965.842063] usb 1-8: new high speed USB device using ehci_hcd and address 5
[13966.385067] usb 1-8: device not accepting address 5, error -71
[13966.500088] usb 1-8: new high speed USB device using ehci_hcd and address 6
[13966.596131] hub 1-0:1.0: unable to enumerate USB device on port 8
[13967.174371] usb 1-8: new high speed USB device using ehci_hcd and address 7
[13967.317101] usb 1-8: configuration #1 chosen from 1 choice
[13967.317303] em28xx new video device (2304:0226): interface 0, class 255
[13967.317314] em28xx Doesn't have usb audio class
[13967.317319] em28xx #0: Alternate settings: 8
[13967.317325] em28xx #0: Alternate setting 0, max size= 0
[13967.317330] em28xx #0: Alternate setting 1, max size= 0
[13967.317335] em28xx #0: Alternate setting 2, max size= 1448
[13967.317340] em28xx #0: Alternate setting 3, max size= 2048
[13967.317345] em28xx #0: Alternate setting 4, max size= 2304
[13967.317350] em28xx #0: Alternate setting 5, max size= 2580
[13967.317355] em28xx #0: Alternate setting 6, max size= 2892
[13967.317360] em28xx #0: Alternate setting 7, max size= 3072
[13967.317558] em28xx #0: chip ID is em2882/em2883
[13967.489593] tuner' 1-0061: chip found @ 0xc2 (em28xx #0)
[13967.537861] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 26 02 d0 12 5c 03 8e 16 a4 1c
[13967.537887] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[13967.537908] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00
[13967.537929] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[13967.537948] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[13967.537967] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[13967.537986] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00
[13967.538006] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
[13967.538025] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03
[13967.538045] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 33 00 33 00 30 00
[13967.538064] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 37 00 31 00 30 00 30 00
[13967.538084] em28xx #0: i2c eeprom b0: 31 00 31 00 32 00 35 00 39 00 39 00 38 00 00 00
[13967.538104] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[13967.538123] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[13967.538141] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[13967.538161] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[13967.538184] EEPROM ID= 0x9567eb1a, hash = 0x73b3a1bf
[13967.538189] Vendor/Product ID= 2304:0226
[13967.538193] AC97 audio (5 sample rates)
[13967.538197] 500mA max power
[13967.538201] Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
[13967.538206] em28xx #0: 
[13967.538208] 
[13967.538214] em28xx #0: The support for this board weren't valid yet.
[13967.538219] em28xx #0: Please send a report of having this working
[13967.538224] em28xx #0: not to V4L mailing list (and/or to other addresses)
[13967.538228] 
[13967.548522] xc2028 1-0061: creating new instance
[13967.548532] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[13967.548553] i2c-adapter i2c-1: firmware: requesting xc3028-v27.fw
[13967.555248] xc2028 1-0061: Error: firmware xc3028-v27.fw not found.
[13967.648486] tvp5150 1-005c: tvp5150am1 detected.
[13967.801341] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[13967.801352] em28xx-audio.c: probing for em28x1 non standard usbaudio
[13967.801358] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[13967.802021] em28xx #0: Found Pinnacle Hybrid Pro (2)
[13967.957520] tvp5150 1-005c: tvp5150am1 detected.
[13968.170854] usb 1-8: USB disconnect, address 7
[13968.171354] em28xx #0: disconnecting em28xx #0 video
[13968.171362] em28xx #0: V4L2 devices /dev/video0 and /dev/vbi0 deregistered
[13968.171530] xc2028 1-0061: destroying instance
[14006.336087] usb 1-8: new high speed USB device using ehci_hcd and address 8
[14006.477730] usb 1-8: configuration #1 chosen from 1 choice
[14006.477971] em28xx new video device (2304:0226): interface 0, class 255
[14006.477984] em28xx Doesn't have usb audio class
[14006.477989] em28xx #0: Alternate settings: 8
[14006.477995] em28xx #0: Alternate setting 0, max size= 0
[14006.478000] em28xx #0: Alternate setting 1, max size= 0
[14006.478005] em28xx #0: Alternate setting 2, max size= 1448
[14006.478010] em28xx #0: Alternate setting 3, max size= 2048
[14006.478015] em28xx #0: Alternate setting 4, max size= 2304
[14006.478021] em28xx #0: Alternate setting 5, max size= 2580
[14006.478026] em28xx #0: Alternate setting 6, max size= 2892
[14006.478048] em28xx #0: Alternate setting 7, max size= 3072
[14006.478392] em28xx #0: chip ID is em2882/em2883
[14006.652555] tuner' 1-0061: chip found @ 0xc2 (em28xx #0)
[14006.685799] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 26 02 d0 12 5c 03 8e 16 a4 1c
[14006.685826] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[14006.685847] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00
[14006.685868] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[14006.685887] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[14006.685907] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[14006.685926] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00
[14006.685945] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
[14006.685965] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03
[14006.685984] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 33 00 33 00 30 00
[14006.686004] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 37 00 31 00 30 00 30 00
[14006.686024] em28xx #0: i2c eeprom b0: 31 00 31 00 32 00 35 00 39 00 39 00 38 00 00 00
[14006.686044] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[14006.686062] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[14006.686082] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[14006.686100] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[14006.686123] EEPROM ID= 0x9567eb1a, hash = 0x73b3a1bf
[14006.686128] Vendor/Product ID= 2304:0226
[14006.686132] AC97 audio (5 sample rates)
[14006.686136] 500mA max power
[14006.686140] Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
[14006.686146] em28xx #0: 
[14006.686148] 
[14006.686155] em28xx #0: The support for this board weren't valid yet.
[14006.686160] em28xx #0: Please send a report of having this working
[14006.686165] em28xx #0: not to V4L mailing list (and/or to other addresses)
[14006.686168] 
[14006.703264] xc2028 1-0061: creating new instance
[14006.703275] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[14006.703297] i2c-adapter i2c-1: firmware: requesting xc3028-v27.fw
[14006.709903] xc2028 1-0061: Error: firmware xc3028-v27.fw not found.
[14006.813069] tvp5150 1-005c: tvp5150am1 detected.
[14006.963276] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[14006.963287] em28xx-audio.c: probing for em28x1 non standard usbaudio
[14006.963293] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[14006.963893] em28xx #0: Found Pinnacle Hybrid Pro (2)
[14007.193618] tvp5150 1-005c: tvp5150am1 detected.
[14340.612521] usb 1-8: USB disconnect, address 8
[14340.613079] em28xx #0: disconnecting em28xx #0 video
[14340.613091] em28xx #0: V4L2 devices /dev/video0 and /dev/vbi0 deregistered
[14340.613268] xc2028 1-0061: destroying instance
[17840.761463] usb 1-8: new high speed USB device using ehci_hcd and address 9
[17840.901125] usb 1-8: configuration #1 chosen from 1 choice
[17840.901363] em28xx new video device (2304:0226): interface 0, class 255
[17840.901374] em28xx Doesn't have usb audio class
[17840.901380] em28xx #0: Alternate settings: 8
[17840.901385] em28xx #0: Alternate setting 0, max size= 0
[17840.901390] em28xx #0: Alternate setting 1, max size= 0
[17840.901395] em28xx #0: Alternate setting 2, max size= 1448
[17840.901400] em28xx #0: Alternate setting 3, max size= 2048
[17840.901406] em28xx #0: Alternate setting 4, max size= 2304
[17840.901411] em28xx #0: Alternate setting 5, max size= 2580
[17840.901416] em28xx #0: Alternate setting 6, max size= 2892
[17840.901422] em28xx #0: Alternate setting 7, max size= 3072
[17840.901661] em28xx #0: chip ID is em2882/em2883
[17841.085822] tuner' 1-0061: chip found @ 0xc2 (em28xx #0)
[17841.121565] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 26 02 d0 12 5c 03 8e 16 a4 1c
[17841.121591] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[17841.121611] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00
[17841.121632] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[17841.121652] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[17841.121671] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[17841.121690] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00
[17841.121709] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
[17841.121729] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03
[17841.121748] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 33 00 33 00 30 00
[17841.121768] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 37 00 31 00 30 00 30 00
[17841.121787] em28xx #0: i2c eeprom b0: 31 00 31 00 32 00 35 00 39 00 39 00 38 00 00 00
[17841.121807] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[17841.121826] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[17841.121844] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[17841.121864] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[17841.121887] EEPROM ID= 0x9567eb1a, hash = 0x73b3a1bf
[17841.121892] Vendor/Product ID= 2304:0226
[17841.121896] AC97 audio (5 sample rates)
[17841.121900] 500mA max power
[17841.121904] Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
[17841.121910] em28xx #0: 
[17841.121912] 
[17841.121918] em28xx #0: The support for this board weren't valid yet.
[17841.121923] em28xx #0: Please send a report of having this working
[17841.121929] em28xx #0: not to V4L mailing list (and/or to other addresses)
[17841.121932] 
[17841.392911] xc2028 1-0061: creating new instance
[17841.392921] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[17841.392941] i2c-adapter i2c-1: firmware: requesting xc3028-v27.fw
[17841.461527] xc2028 1-0061: Error: firmware xc3028-v27.fw not found.
[17841.557499] tvp5150 1-005c: tvp5150am1 detected.
[17841.714855] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[17841.714864] em28xx-audio.c: probing for em28x1 non standard usbaudio
[17841.714870] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[17841.715456] em28xx #0: Found Pinnacle Hybrid Pro (2)
[17842.049561] tvp5150 1-005c: tvp5150am1 detected.
bbc@bbc-laptop:~$ 
When you will discover that windows sucks it will be too late...
Avatar utente
angeloilcampione
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 3107
Iscrizione: venerdì 3 aprile 2009, 15:35
Località: /dev/null

Re: [Video] Scheda tv Pinnacle e330 Ubuntu 9.04

Messaggio da angeloilcampione »

è riconosciuta penso , continua l'installazione
Avatar utente
kapello
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 2135
Iscrizione: lunedì 21 maggio 2007, 18:38
Desktop: KDE
Distribuzione: Kbuntu 13.10 amd64
Località: Torino
Contatti:

Re: [Video] Scheda tv Pinnacle e330 Ubuntu 9.04

Messaggio da kapello »

angeloilcampione ha scritto: o questo http://fattazzo.net46.net/2009/05/08/pi ... buntu-904/
Scusate se mi intrometto, ma questo link porta ad una pagina dove si configura una 72e, non una 330e.  ;D
Quando il saggio indica la luna, lo sciocco guarda il dito - L'esistenza dovrebbe essere sempre colma di bellezza ed emozioni, ma sarebbe ugualmente vuota, senza contenuti. - I miei racconti - Ubuntu user #27862
Avatar utente
angeloilcampione
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 3107
Iscrizione: venerdì 3 aprile 2009, 15:35
Località: /dev/null

Re: [Video] Scheda tv Pinnacle e330 Ubuntu 9.04

Messaggio da angeloilcampione »

penso che vada bene... penso non ci sono molte differenze
Avatar utente
kapello
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 2135
Iscrizione: lunedì 21 maggio 2007, 18:38
Desktop: KDE
Distribuzione: Kbuntu 13.10 amd64
Località: Torino
Contatti:

Re: [Video] Scheda tv Pinnacle e330 Ubuntu 9.04

Messaggio da kapello »

angeloilcampione ha scritto: penso che vada bene... penso non ci sono molte differenze
No cambia tutto!! La 330e è un pò rognosa. (ce l'ho io!)
Quando il saggio indica la luna, lo sciocco guarda il dito - L'esistenza dovrebbe essere sempre colma di bellezza ed emozioni, ma sarebbe ugualmente vuota, senza contenuti. - I miei racconti - Ubuntu user #27862
Avatar utente
angeloilcampione
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 3107
Iscrizione: venerdì 3 aprile 2009, 15:35
Località: /dev/null

Re: [Video] Scheda tv Pinnacle e330 Ubuntu 9.04

Messaggio da angeloilcampione »

come l'hai installata?
Avatar utente
kapello
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 2135
Iscrizione: lunedì 21 maggio 2007, 18:38
Desktop: KDE
Distribuzione: Kbuntu 13.10 amd64
Località: Torino
Contatti:

Re: [Video] Scheda tv Pinnacle e330 Ubuntu 9.04

Messaggio da kapello »

angeloilcampione ha scritto: come l'hai installata?
Seguendo la prima procedura postata. Solo che l'ho fatto tempo fa (tra l'altro sono poi passato al 64bit e non l'ho più installata. Ora non la trovo e non posso provare) e mi sembra di avere letto che i driver non sono più disponibili (ma non sono sicuro). Comunque c'è la guida ufficiale
http://wiki.ubuntu-it.org/Hardware/Sche ... nnacle330e
Quando il saggio indica la luna, lo sciocco guarda il dito - L'esistenza dovrebbe essere sempre colma di bellezza ed emozioni, ma sarebbe ugualmente vuota, senza contenuti. - I miei racconti - Ubuntu user #27862
Avatar utente
angeloilcampione
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 3107
Iscrizione: venerdì 3 aprile 2009, 15:35
Località: /dev/null

Re: [Video] Scheda tv Pinnacle e330 Ubuntu 9.04

Messaggio da angeloilcampione »

quanto costa se la voglio comprare
Avatar utente
kapello
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 2135
Iscrizione: lunedì 21 maggio 2007, 18:38
Desktop: KDE
Distribuzione: Kbuntu 13.10 amd64
Località: Torino
Contatti:

Re: [Video] Scheda tv Pinnacle e330 Ubuntu 9.04

Messaggio da kapello »

angeloilcampione ha scritto: quanto costa se la voglio comprare
Non ricordo. Però come ti ho detto non è il massimo di compatibilità. Io mi butterei su qualcos'altro (non so cosa, fai una ricerchina!)
Quando il saggio indica la luna, lo sciocco guarda il dito - L'esistenza dovrebbe essere sempre colma di bellezza ed emozioni, ma sarebbe ugualmente vuota, senza contenuti. - I miei racconti - Ubuntu user #27862
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: Google [Bot] e 5 ospiti