Driver chiavetta tv Terratec Cinergy T Stick su Ubuntu

[kripton]

quindi la chiavetta funziona ora?

sisi... da non credere sono due giorni che ci sbatto la testa poi basta un comando e tutto funziona...ho seguito questa guida:

sudo apt-get install linux-source-2.6.28 linux-headers-2.6.28-15-generic kernel-package


poi

Codice:

cd /usr/src ; tar xjf linux-source-2.6.28.tar.bz2


scarica questi: http://tonelli.sns.it/pub/mennucc1/terr ... a_m.tar.gz
e scompattali.

modifica questa parte del makefile:
#### CONFIGURE THE FOLLOWING LINES
#the precompiled kernel headers
KDIR = /usr/src/linux-headers-2.6.30-1-686
#the unpacked kernel source
KSRC = /usr/src/linux-source-2.6.30
#where the modules will be installed
KINSTALL = /lib/modules/linux-2.6.30-1-686/misc
#### END OF CONFIGURABLE LINES

in modo che i percorsi siano giusti con la tua versione del kernel.
probabilmente così dovrebbe funzionare:

#### CONFIGURE THE FOLLOWING LINES
#the precompiled kernel headers
KDIR = /usr/src/linux-headers-2.6.28-15-generic
#the unpacked kernel source
KSRC = /usr/src/linux-source-2.6.28
#where the modules will be installed
KINSTALL = /lib/modules/linux-2.6.28-15-generic/misc
#### END OF CONFIGURABLE LINES

poi ti porti con il terminale nella cartella dove c'è il make file e dai:
make
sudo make install

copia il firmware dvb-usb-af9035-01.fw(è nella'archivio di prima) in /lib/firmware
riavvia e dovrebbe funzionare.

con il kernel di karmic 2.6.31 e tutto funziona, uso kaffeine. ''Me tv'' invece sarà per la versione beta di karmic ma dopo la ricerca a buon fine dei canali non mi avvia nulla rimane schermo nero

[giorgio130]

ottimo  (good) (good)
speriamo serva anche ai nostri soci.

[roob]

sudo apt-get install linux-source-2.6.28 linux-headers-2.6.28-15-generic kernel-package

visto che la cosa m'interessa...ma usando Karmic, al posto di quel comando non dovrei usare(o scrivere):

Codice: Seleziona tutto

sudo apt-get install linux-source-2.6.31 linux-headers-2.6.31-11-generic kernel-package

???

EDIT:
l'installazione è andata a buon fine anche a me e kaffeine finalmente cerca un qualcosa; però in "Driver Hardware" ho due possibilità di driver quello Open(Aatech AF9035) e quello proprietario(Firmware per schede DVB); qual è il migliore dei due?

[kripton]

sudo apt-get install linux-source-2.6.28 linux-headers-2.6.28-15-generic kernel-package

visto che la cosa m'interessa...ma usando Karmic, al posto di quel comando non dovrei usare(o scrivere):

Codice: Seleziona tutto

sudo apt-get install linux-source-2.6.31 linux-headers-2.6.31-11-generic kernel-package

???

EDIT:
l'installazione è andata a buon fine anche a me e kaffeine finalmente cerca un qualcosa; però in "Driver Hardware" ho due possibilità di driver quello Open(Aatech AF9035) e quello proprietario(Firmware per schede DVB); qual è il migliore dei due?

certo certo devi sostituire la stringa della tua versione del kernel, se usi karmic in questo caso devi inserire nel terminale:

sudo apt-get install linux-source-2.6.31 linux-headers-2.6.31-11-generic kernel-package

per il driver lo trovi pronto e attivato al primo avvio dopo l'installazione... per quanto riguarda il firmware della chiavetta , anche quello va attivato, sono due cose indipendenti, attivando l'uno non si disattiva l'altro... io senza il firmware non avevo piena funzionalità della chiavetta. (good)

[kripton]

ragazzi per far funzionare la ''chiavetta tv Terratec Cinergy T Stick'' sul kernel 2.6.31-11 di karmic ho seguito questi semplici passi:

1) sudo apt-get install linux-source-2.6.31 linux-headers-2.6.31-11-generic kernel-package
2)cd /usr/src ; tar xjf linux-source-2.6.31.tar.bz2
3)scaricare e scompattare : http://tonelli.sns.it/pub/mennucc1/terr ... a_m.tar.gz

4)poi bisogna modificare la parte del makefile che contiene la versione del kernel.

cioè questa:

#### CONFIGURE THE FOLLOWING LINES
#the precompiled kernel headers
KDIR = /usr/src/linux-headers-2.6.30-1-686
#the unpacked kernel source
KSRC = /usr/src/linux-source-2.6.30
#where the modules will be installed
KINSTALL = /lib/modules/linux-2.6.30-1-686/misc
#### END OF CONFIGURABLE LINES

modificandolo così:

#### CONFIGURE THE FOLLOWING LINES
#the precompiled kernel headers
KDIR = /usr/src/linux-headers-2.6.31-11-generic
#the unpacked kernel source
KSRC = /usr/src/linux-source-2.6.31
#where the modules will be installed
KINSTALL = /lib/modules/2.6.31-11-generic
#### END OF CONFIGURABLE LINES

5) poi da terminale entriamo nella cartella del makefile appena modificato:
make
sudo make install

6)copia il firmware dvb-usb-af9035-01.fw, che si trova dove nella cartella dove si è modificato il makefile , copiandolo in  /lib/firmware

poi si riavvia e la chiavetta è pronta per l'utilizzo. In ''Driver Hardware'' sarà presente anche il firmware: (Firmware per schede DVB) da attivare. (b2b)

[roob]

Ok, funziona!

Il fatto che mi trovi pochissimi canali so già dipendere dalla zona dove abito!

Grazie!

[kripton]

prego =) ho controllato e comunque prende gli stessi canali che prenderebbe un decoder collegato alla tv di casa ne più ne meno ciao=)

[roob]

si si, volevo dire che nella mia via e condominio, sappiamo che il digitale non offre i canali "promessi" per problemi di antenna e/o zona! Ma quando tornerò a Roma potrò godermela

[kripton]

comunque ho notato un piccolo problema...al riavvio non viene riconosciuta se lo si esegue con la chiavetta inserita... mi spiego meglio: almeno per come ho avuto modo di notare se si lascia la chiavetta sempre connessa al riavvio poi bisogna staccarla e riattacarla...qualcuno ha notato ciò?

[kripton]

ragazzi bisogna aggiungere questo modulo (em28xx-dvb) da caricare ad ogni riavvio nel /etc/modules ,altrimenti la chiavetta ad ogni riavvio ha bisogno di essere scollegata e ricollegata alla porta usb per essere riconosciuta... quindi basta aprire /etc/modules con :

sudo gedit /etc/modules
e aggiungere questo : em28xx-dvb

(chiavetta tv terratec cinergy t stick configurata sul kernel di karmic)
ciao

[esteban1]

Grazie i dati per far funzionare la Cinergy T Stick Terratec, non mi aspettavo ricevere tanti canali con la antennina  in dotazione.

Ho solo dovuto modificare una riga del makefile come segue, gia che mi dava un errore.

#### CONFIGURE THE FOLLOWING LINES
#the precompiled kernel headers
KDIR = /usr/src/linux-headers-2.6.28-15-generic
#the unpacked kernel source
KSRC = /usr/src/linux-source-2.6.28
#where the modules will be installed
KINSTALL = /lib/modules/2.6.28-15-generic/misc
#### END OF CONFIGURABLE LINES

il cambio è solo nella penultima riga, ho dovuto creare manualmente anche la directory /misc  .

Chiarisco che sono un neofita in usare Linux.

io uso : Ubuntu 9.04 - Jaunty Jackalope

Saluti Esteban.

[kripton]

è un ottimo dispositivo e in più funziona a pieno su linux... (good)

[MichelS21]

ciao a tutti sono nuovissimo nel mondo dell'open source, sto utilizzando ubuntu 9.04 da un mese,ieri ho comprato il ricevitore usb della terratec cinergy Tstick RC, ho seguito varie guide ma mi danno tutte un errore,forse sbaglio con le righe di comando..Aiutatemi perfavore non vorrei passare di nuovo a windows..  >:(

Grazie a tutti!

[roob]

scrivici l'errore che ti viene fuori altrimenti nessuno può aiutarti

[sabry26]

Ciao a tutti..
oggi ho comprato la tv in chiavetta usb CINERGY Y STICK..
priva avevo pinnacle e mi creava sempre problemi e alla fine me l hanno cambiata con questa!
Io ho Vista 64bit,e ho provato ad istallarla ma nn mi escono i canali principali esempio Italia Uno,e Canale 5!
Come posso fare?
grazie mille!

[kripton]

Ciao a tutti..
oggi ho comprato la tv in chiavetta usb CINERGY Y STICK..
priva avevo pinnacle e mi creava sempre problemi e alla fine me l hanno cambiata con questa!
Io ho Vista 64bit,e ho provato ad istallarla ma nn mi escono i canali principali esempio Italia Uno,e Canale 5!
Come posso fare?
grazie mille!

se è per installarla su ubuntu c'è una guida un paio di post sopra, se trovi problemi sono a disposizione per aiutarti a farla funzionare... se è per installarla su vista non posso aiutarti, ormai ho rimosso tutto quello che è windows 

[MichelS21]

Ciao a tutti sto cercando di seguire le istruzioni di Kripton, essendo nuovo su ubuntu e sistemi nostrani non sono molto pratico,..premetto che ho installato la versione 9.10 di ubuntu.
do questo comando michele@michele-desktop:~$ sudo apt-get install linux-source-2.6.31 linux-headers-2.6.31-11-generic kernel-package
Lettura elenco dei pacchetti... Fatto
Generazione albero delle dipendenze     
Lettura informazioni sullo stato... Fatto
E: Impossibile trovare il pacchetto linux-headers-2.6.31-11-generic
Scusate se sono troppo nubbio!

[kripton]

Ciao a tutti sto cercando di seguire le istruzioni di Kripton, essendo nuovo su ubuntu e sistemi nostrani non sono molto pratico,..premetto che ho installato la versione 9.10 di ubuntu.
do questo comando michele@michele-desktop:~$ sudo apt-get install linux-source-2.6.31 linux-headers-2.6.31-11-generic kernel-package
Lettura elenco dei pacchetti... Fatto
Generazione albero delle dipendenze     
Lettura informazioni sullo stato... Fatto
E: Impossibile trovare il pacchetto linux-headers-2.6.31-11-generic
Scusate se sono troppo nubbio!

hey ciao... sulla 9.10 ora il kernel è 2.6.31.14 quindi devi solo modificare il codice così : sudo apt-get install linux-source-2.6.31 linux-headers-2.6.31-14-generic kernel-package

e poi anche con il makefile:

#### CONFIGURE THE FOLLOWING LINES
#the precompiled kernel headers
KDIR = /usr/src/linux-headers-2.6.31-14-generic
#the unpacked kernel source
KSRC = /usr/src/linux-source-2.6.31
#where the modules will be installed
KINSTALL = /lib/modules/2.6.31-14-generic
#### END OF CONFIGURABLE LINES

vai che ora va (good)

[chkdsk]

Ciao a tutti,

sto provando a configurare la mia Terratec Cinergy T Stick su Karmic sul mio eeeBox.

Quando vado a lanciare il make dopo aver modificato il makefile ottengo questo output che copio/incollo:

make -C /usr/src/linux-headers-2.6.31-14 SUBDIRS=/home/luca/Scrivania/terratec_af9035-a_m modules
make[1]: ingresso nella directory «/usr/src/linux-headers-2.6.31-14»

 ERROR: Kernel configuration is invalid.
        include/linux/autoconf.h or include/config/auto.conf are missing.
        Run 'make oldconfig && make prepare' on kernel src to fix it.


 WARNING: Symbol version dump /usr/src/linux-headers-2.6.31-14/Module.symvers
          is missing; modules will have no dependencies and modversions.

 CC [M]  /home/luca/Scrivania/terratec_af9035-a_m/tua9001.o
cc1: error: include/linux/autoconf.h: Nessun file o directory
In file included from /usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/thread_info.h:22,
                from include/linux/thread_info.h:56,
                from include/linux/preempt.h:9,
                from include/linux/spinlock.h:50,
                from include/linux/seqlock.h:29,
                from include/linux/time.h:8,
                from include/linux/timex.h:56,
                from include/linux/sched.h:54,
                from /usr/src/linux-headers-2.6.31-14/drivers/media/dvb/dvb-core/dvb_frontend.h:32,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.h:24,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.c:21:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/processor.h:115: error: ‘CONFIG_X86_L1_CACHE_SHIFT’ undeclared here (not in a function)
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/processor.h:115: error: requested alignment is not a constant
In file included from /usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/thread_info.h:22,
                from include/linux/thread_info.h:56,
                from include/linux/preempt.h:9,
                from include/linux/spinlock.h:50,
                from include/linux/seqlock.h:29,
                from include/linux/time.h:8,
                from include/linux/timex.h:56,
                from include/linux/sched.h:54,
                from /usr/src/linux-headers-2.6.31-14/drivers/media/dvb/dvb-core/dvb_frontend.h:32,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.h:24,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.c:21:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/processor.h:161:1: warning: "cache_line_size" redefined
In file included from include/linux/time.h:7,
                from include/linux/timex.h:56,
                from include/linux/sched.h:54,
                from /usr/src/linux-headers-2.6.31-14/drivers/media/dvb/dvb-core/dvb_frontend.h:32,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.h:24,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.c:21:
include/linux/cache.h:64:1: warning: this is the location of the previous definition
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/processor.h: In function ‘load_cr3’:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/processor.h:192: error: ‘CONFIG_PAGE_OFFSETUL’ undeclared (first use in this function)
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/processor.h:192: error: (Each undeclared identifier is reported only once
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/processor.h:192: error: for each function it appears in.)
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/processor.h: At top level:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/processor.h:241: error: requested alignment is not a constant
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/processor.h:272: error: requested alignment is not a constant
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/processor.h: In function ‘wbinvd_halt’:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/processor.h:777: error: implicit declaration of function ‘halt’
In file included from /usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic.h:4,
                from /usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/thread_info.h:24,
                from include/linux/thread_info.h:56,
                from include/linux/preempt.h:9,
                from include/linux/spinlock.h:50,
                from include/linux/seqlock.h:29,
                from include/linux/time.h:8,
                from include/linux/timex.h:56,
                from include/linux/sched.h:54,
                from /usr/src/linux-headers-2.6.31-14/drivers/media/dvb/dvb-core/dvb_frontend.h:32,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.h:24,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.c:21:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h: At top level:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:201: warning: type defaults to ‘int’ in declaration of ‘atomic64_t’
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:201: error: expected ‘;’, ‘,’ or ‘)’ before ‘*’ token
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:213: error: expected ‘)’ before ‘*’ token
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:225: error: expected declaration specifiers or ‘...’ before ‘atomic64_t’
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h: In function ‘atomic64_add’:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:228: error: ‘v’ undeclared (first use in this function)
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:227: error: invalid lvalue in asm output 0
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:227: error: memory input 2 is not directly addressable
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h: At top level:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:239: error: expected declaration specifiers or ‘...’ before ‘atomic64_t’
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h: In function ‘atomic64_sub’:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:242: error: ‘v’ undeclared (first use in this function)
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:241: error: invalid lvalue in asm output 0
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:241: error: memory input 2 is not directly addressable
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h: At top level:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:255: error: expected declaration specifiers or ‘...’ before ‘atomic64_t’
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h: In function ‘atomic64_sub_and_test’:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:260: error: ‘v’ undeclared (first use in this function)
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:259: error: invalid lvalue in asm output 0
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:259: error: memory input 3 is not directly addressable
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h: At top level:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:271: error: expected ‘)’ before ‘*’ token
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:284: error: expected ‘)’ before ‘*’ token
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:299: error: expected ‘)’ before ‘*’ token
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:317: error: expected ‘)’ before ‘*’ token
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:336: error: expected declaration specifiers or ‘...’ before ‘atomic64_t’
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h: In function ‘atomic64_add_negative’:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:341: error: ‘v’ undeclared (first use in this function)
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:340: error: invalid lvalue in asm output 0
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:340: error: memory input 3 is not directly addressable
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h: At top level:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:353: error: expected declaration specifiers or ‘...’ before ‘atomic64_t’
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h: In function ‘atomic64_add_return’:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:357: error: ‘v’ undeclared (first use in this function)
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:356: error: invalid lvalue in asm output 1
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:356: error: memory input 3 is not directly addressable
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h: At top level:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:362: error: expected declaration specifiers or ‘...’ before ‘atomic64_t’
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h: In function ‘atomic64_sub_return’:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:364: error: ‘v’ undeclared (first use in this function)
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:364: error: too many arguments to function ‘atomic64_add_return’
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h: At top level:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:370: error: expected ‘)’ before ‘*’ token
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:375: error: expected ‘)’ before ‘*’ token
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/atomic_64.h:425: error: expected ‘)’ before ‘*’ token
In file included from include/linux/sched.h:55,
                from /usr/src/linux-headers-2.6.31-14/drivers/media/dvb/dvb-core/dvb_frontend.h:32,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.h:24,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.c:21:
include/linux/jiffies.h:18:5: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:20:7: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:22:7: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:24:7: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:26:7: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:28:7: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:30:7: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:32:7: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:34:7: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:36:7: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:39:3: error: #error Invalid value of HZ.
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: error: division by zero in #if
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: error: division by zero in #if
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: error: division by zero in #if
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: error: division by zero in #if
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: error: division by zero in #if
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: error: division by zero in #if
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: error: division by zero in #if
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: error: division by zero in #if
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: error: division by zero in #if
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: error: division by zero in #if
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: error: division by zero in #if
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: error: division by zero in #if
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: error: division by zero in #if
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: error: division by zero in #if
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: error: division by zero in #if
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:257:31: error: division by zero in #if
include/linux/jiffies.h:257:46: warning: "SHIFT_HZ" is not defined
In file included from include/linux/sched.h:60,
                from /usr/src/linux-headers-2.6.31-14/drivers/media/dvb/dvb-core/dvb_frontend.h:32,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.h:24,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.c:21:
include/linux/nodemask.h: In function ‘__first_node’:
include/linux/nodemask.h:239: error: implicit declaration of function ‘find_first_bit’
include/linux/nodemask.h: In function ‘__next_node’:
include/linux/nodemask.h:245: error: implicit declaration of function ‘find_next_bit’
include/linux/nodemask.h: In function ‘__first_unset_node’:
include/linux/nodemask.h:263: error: implicit declaration of function ‘find_first_zero_bit’
In file included from include/linux/sched.h:61,
                from /usr/src/linux-headers-2.6.31-14/drivers/media/dvb/dvb-core/dvb_frontend.h:32,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.h:24,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.c:21:
include/linux/mm_types.h:27:5: warning: "CONFIG_SPLIT_PTLOCK_CPUS" is not defined
include/linux/mm_types.h:71:5: warning: "CONFIG_SPLIT_PTLOCK_CPUS" is not defined
In file included from include/linux/sem.h:81,
                from include/linux/sched.h:69,
                from /usr/src/linux-headers-2.6.31-14/drivers/media/dvb/dvb-core/dvb_frontend.h:32,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.h:24,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.c:21:
include/linux/rcupdate.h:64:2: error: #error "Unknown RCU implementation specified to kernel configuration"
In file included from include/linux/gfp.h:4,
                from include/linux/slab.h:12,
                from include/linux/percpu.h:5,
                from include/linux/sched.h:75,
                from /usr/src/linux-headers-2.6.31-14/drivers/media/dvb/dvb-core/dvb_frontend.h:32,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.h:24,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.c:21:
include/linux/mmzone.h:18:26: error: linux/bounds.h: Nessun file o directory
include/linux/mmzone.h:251:5: warning: "MAX_NR_ZONES" is not defined
include/linux/mmzone.h:253:7: warning: "MAX_NR_ZONES" is not defined
include/linux/mmzone.h:255:7: warning: "MAX_NR_ZONES" is not defined
In file included from include/linux/gfp.h:4,
                from include/linux/slab.h:12,
                from include/linux/percpu.h:5,
                from include/linux/sched.h:75,
                from /usr/src/linux-headers-2.6.31-14/drivers/media/dvb/dvb-core/dvb_frontend.h:32,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.h:24,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.c:21:
include/linux/mmzone.h: At top level:
include/linux/mmzone.h:288: error: ‘MAX_NR_ZONES’ undeclared here (not in a function)
In file included from include/linux/gfp.h:8,
                from include/linux/slab.h:12,
                from include/linux/percpu.h:5,
                from include/linux/sched.h:75,
                from /usr/src/linux-headers-2.6.31-14/drivers/media/dvb/dvb-core/dvb_frontend.h:32,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.h:24,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.c:21:
include/linux/mmdebug.h:4:28: error: linux/autoconf.h: Nessun file o directory
In file included from include/trace/events/kmem.h:8,
                from include/linux/kmemtrace.h:12,
                from include/linux/slab_def.h:17,
                from include/linux/slab.h:166,
                from include/linux/percpu.h:5,
                from include/linux/sched.h:75,
                from /usr/src/linux-headers-2.6.31-14/drivers/media/dvb/dvb-core/dvb_frontend.h:32,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.h:24,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.c:21:
include/linux/tracepoint.h: In function ‘tracepoint_synchronize_unregister’:
include/linux/tracepoint.h:156: error: implicit declaration of function ‘__synchronize_sched’
In file included from include/linux/slab_def.h:144,
                from include/linux/slab.h:166,
                from include/linux/percpu.h:5,
                from include/linux/sched.h:75,
                from /usr/src/linux-headers-2.6.31-14/drivers/media/dvb/dvb-core/dvb_frontend.h:32,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.h:24,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.c:21:
include/linux/kmalloc_sizes.h:5:5: warning: "CONFIG_X86_L1_CACHE_SHIFT" is not defined
include/linux/kmalloc_sizes.h:9:5: warning: "CONFIG_X86_L1_CACHE_SHIFT" is not defined
In file included from include/linux/sched.h:77,
                from /usr/src/linux-headers-2.6.31-14/drivers/media/dvb/dvb-core/dvb_frontend.h:32,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.h:24,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.c:21:
include/linux/proportions.h: In function ‘prop_inc_percpu’:
include/linux/proportions.h:75: error: implicit declaration of function ‘local_irq_save’
include/linux/proportions.h:77: error: implicit declaration of function ‘local_irq_restore’
In file included from /usr/src/linux-headers-2.6.31-14/drivers/media/dvb/dvb-core/dvb_frontend.h:32,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.h:24,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.c:21:
include/linux/sched.h:384:5: warning: "CONFIG_SPLIT_PTLOCK_CPUS" is not defined
In file included from include/linux/elf.h:7,
                from include/linux/module.h:14,
                from include/linux/i2c.h:31,
                from /usr/src/linux-headers-2.6.31-14/drivers/media/dvb/dvb-core/dvb_frontend.h:34,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.h:24,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.c:21:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/elf.h: In function ‘start_ia32_thread’:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/elf.h:165: error: implicit declaration of function ‘load_gs_index’
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/elf.h: In function ‘elf_common_init’:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/elf.h:180: error: ‘struct thread_struct’ has no member named ‘fs’
In file included from include/linux/module.h:22,
                from include/linux/i2c.h:31,
                from /usr/src/linux-headers-2.6.31-14/drivers/media/dvb/dvb-core/dvb_frontend.h:34,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.h:24,
                from /home/luca/Scrivania/terratec_af9035-a_m/tua9001.c:21:
/usr/src/linux-headers-2.6.31-14/arch/x86/include/asm/module.h:68:2: error: #error unknown processor family
/home/luca/Scrivania/terratec_af9035-a_m/tua9001.c: In function ‘tua9001_writereg’:
/home/luca/Scrivania/terratec_af9035-a_m/tua9001.c:35: error: implicit declaration of function ‘i2c_transfer’
make[2]: *** [/home/luca/Scrivania/terratec_af9035-a_m/tua9001.o] Errore 1
make[1]: *** [_module_/home/luca/Scrivania/terratec_af9035-a_m] Errore 2
make[1]: uscita dalla directory «/usr/src/linux-headers-2.6.31-14»
make: *** [default] Errore 2


Che posso fare?????  :'(

Grazie

[MichelS21]

grazie kripton sto provando, visto che ho ancora la conessione a 56k mi ci vuole un pò.