[Install] installare archeos su ubuntu 9.04

[sbuc]

salve io ho un acer aspire 1650 con un hard disk da 250 gb con installato ubuntu 9.04 e volevo installare anche acheos 2.0.0.
il mio disco e ripartito: 14 gb per ubuntu, 2 gb per la swap, e tutto il resto per la home..
volevo sapere se è fattibile.. e che qualcuno molto gentilmente mi spieghi come fare..

grazie

[sbuc]

help

[Stribianese91]

Certo che è fattibile 

Ti fai un backup di tutti i dati che devi salvare (quelli presenti nella partizione /home), non si sa mai... Poi inserisci il cd di ubuntu, una volta caricato il sistema live clicchi su Sistema → Amministrazione → QualcosaRiguardanteIDischi... Dovrebbe essere gparted, ma non ne sono sicuro

Una volta che si è avviato il programma, vedrai una schermata simile a questa: dovrai cliccare sulla partizione finale e ridurla in questa maniera
Dopo dovrai aspettare una mezzoretta circa...


Così facendo hai creato uno spazio vuoto per ArcheOS... Tu poi quando lo installerai, indicherai quella partizione vuota come "/"... Ora non ho mai installato questa distro, quindi non ti so dire niente di più...

Ah, la partizione di swap è comune a entrambi i sistemi operativi: non dovrai crearne una quando installi la nuova distro


Facci sapere per qualsiasi problema

[sbuc]

ho creato la partizione per archeos.. però ogni volta che provo a scaricare il file iso archeos l'md5 risulta diverso da quello fornito dal sito.. e poi quando lo masterizzo e provo ad installarlo nella partizione che ho creato la finestra della percentuale di installazione sparisce..

[Stribianese91]

Come lo scarichi? Da server o da torrent?
Ci dai il link?

[sbuc]

lo scarico da link... però ora sono riuscito a scaricarlo con md5 uguale a quello fornito dal sito.. l'ho anche installato però quando riaccendo il pc mi vede che ci sono installati due sistemi operativi però non mi fa partire più ubuntu..

il disco è partizionato così:
10 giga per ubuntu
altri 10 giga per archeos
2 giga per la swap
e il resto per la homeee..

grazie per l'aiuto

[Stribianese91]

Mostraci il tuo file /boot/grub/menu.lst presente in Archeos

[sbuc]

si è presente..
mi trova archeos che è nominato: ubuntu 7.10
e poi trova 3 versioni di ubuntu 9.04
quando provo ad aprire ubuntu mi dice errore schiaccia qualsiasi chiave.. e quando do enter ritorna al grub

[sbuc]

???
# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=02bca9fd-201e-4b20-b715-1330e7b94522 ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,4)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Ubuntu 7.10, kernel 2.6.22-14-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=02bca9fd-201e-4b20-b715-1330e7b94522 ro quiet splash
initrd /boot/initrd.img-2.6.22-14-generic
quiet

title Ubuntu 7.10, kernel 2.6.22-14-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=02bca9fd-201e-4b20-b715-1330e7b94522 ro single
initrd /boot/initrd.img-2.6.22-14-generic

title Ubuntu 7.10, memtest86+
root (hd0,4)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title Ubuntu 9.04, kernel 2.6.28-16-generic (on /dev/sda1)
root (hd0,0)
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=755ed3e1-4ac3-4987-8e91-a70902fbc05a ro quiet splash
initrd /boot/initrd.img-2.6.28-16-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode) (on /dev/sda1)
root (hd0,0)
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=755ed3e1-4ac3-4987-8e91-a70902fbc05a ro single
initrd /boot/initrd.img-2.6.28-16-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1)
root (hd0,0)
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=755ed3e1-4ac3-4987-8e91-a70902fbc05a ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode) (on /dev/sda1)
root (hd0,0)
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=755ed3e1-4ac3-4987-8e91-a70902fbc05a ro single
initrd /boot/initrd.img-2.6.28-11-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title Ubuntu 9.04, memtest86+ (on /dev/sda1)
root (hd0,0)
kernel /boot/memtest86+.bin 
savedefault
boot

[Stribianese91]

Bene... Ora fai così: una volta avviato archeos, monta, la partizione di ubuntu jaunty...

Quindi, una volta fatto ciò, la apri e vai nella cartella boot → grub e apri il file menu.lst

Attenzione! Questo file non è quello di Archeos!!
Ora lo scorri verso il basso fino a quando non arrivi alla riga ## ## End Default Options ##

Qui saranno presenti tutti gli ubuntu 9.04... fai un copia-incolla in modo da sostituire quelli del menu.lst di archeos (quelli dopo la riga ### END DEBIAN AUTOMAGIC KERNELS LIST)


Detto in poche parole: il menu.lst di archeos è quello che legge il pc quando lo avvii... Esso avvia correttamente archeos, ma ha dei problemi con ubuntu. Perciò copiamo le righe del vecchio menu.lst (che non è più usato) che facevano avviare ubuntu  le sostituiamo a quelle dell'attuale menu.lst, ma solo quelle di ubuntu

Per qualsiasi problema chiedi pure 

[sbuc]

ok.. allora ho provato.. ma dopo end debian automatic kernels list non c'è niente.. cmq ho copiato (tutti gli ubuntu che c'erano dopo end default options) e gli incollati dopo la stringa di end debian automatic kernels però non mi lascia salvare... >:(

[sbuc]

ti incollo qui la menù lst:
# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=755ed3e1-4ac3-4987-8e91-a70902fbc05a ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=755ed3e1-4ac3-4987-8e91-a70902fbc05a

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Ubuntu 9.04, kernel 2.6.28-16-generic
uuid 755ed3e1-4ac3-4987-8e91-a70902fbc05a
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=755ed3e1-4ac3-4987-8e91-a70902fbc05a ro quiet splash
initrd /boot/initrd.img-2.6.28-16-generic
quiet

title Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode)
uuid 755ed3e1-4ac3-4987-8e91-a70902fbc05a
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=755ed3e1-4ac3-4987-8e91-a70902fbc05a ro  single
initrd /boot/initrd.img-2.6.28-16-generic

title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid 755ed3e1-4ac3-4987-8e91-a70902fbc05a
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=755ed3e1-4ac3-4987-8e91-a70902fbc05a ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet

title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid 755ed3e1-4ac3-4987-8e91-a70902fbc05a
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=755ed3e1-4ac3-4987-8e91-a70902fbc05a ro  single
initrd /boot/initrd.img-2.6.28-11-generic

title Ubuntu 9.04, memtest86+
uuid 755ed3e1-4ac3-4987-8e91-a70902fbc05a
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

[Stribianese91]

Codice: Seleziona tutto

# menu.lst - See: grub(Cool, info grub, update-grub(Cool
#            grub-install(Cool, grub-floppy(Cool,
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default      0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout      10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title      Windows 95/98/NT/2000
# root      (hd0,0)
# makeactive
# chainloader   +1
#
# title      Linux
# root      (hd0,1)
# kernel   /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=02bca9fd-201e-4b20-b715-1330e7b94522 ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,4)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title      Ubuntu 7.10, kernel 2.6.22-14-generic
root      (hd0,4)
kernel      /boot/vmlinuz-2.6.22-14-generic root=UUID=02bca9fd-201e-4b20-b715-1330e7b94522 ro quiet splash
initrd      /boot/initrd.img-2.6.22-14-generic
quiet

title      Ubuntu 7.10, kernel 2.6.22-14-generic (recovery mode)
root      (hd0,4)
kernel      /boot/vmlinuz-2.6.22-14-generic root=UUID=02bca9fd-201e-4b20-b715-1330e7b94522 ro single
initrd      /boot/initrd.img-2.6.22-14-generic

title      Ubuntu 7.10, memtest86+
root      (hd0,4)
kernel      /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title      Other operating systems:
root


title      Ubuntu 9.04, kernel 2.6.28-16-generic
uuid      755ed3e1-4ac3-4987-8e91-a70902fbc05a
kernel      /boot/vmlinuz-2.6.28-16-generic root=UUID=755ed3e1-4ac3-4987-8e91-a70902fbc05a ro quiet splash
initrd      /boot/initrd.img-2.6.28-16-generic
quiet

title      Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode)
uuid      755ed3e1-4ac3-4987-8e91-a70902fbc05a
kernel      /boot/vmlinuz-2.6.28-16-generic root=UUID=755ed3e1-4ac3-4987-8e91-a70902fbc05a ro  single
initrd      /boot/initrd.img-2.6.28-16-generic

title      Ubuntu 9.04, kernel 2.6.28-11-generic
uuid      755ed3e1-4ac3-4987-8e91-a70902fbc05a
kernel      /boot/vmlinuz-2.6.28-11-generic root=UUID=755ed3e1-4ac3-4987-8e91-a70902fbc05a ro quiet splash
initrd      /boot/initrd.img-2.6.28-11-generic
quiet

title      Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid      755ed3e1-4ac3-4987-8e91-a70902fbc05a
kernel      /boot/vmlinuz-2.6.28-11-generic root=UUID=755ed3e1-4ac3-4987-8e91-a70902fbc05a ro  single
initrd      /boot/initrd.img-2.6.28-11-generic

title      Ubuntu 9.04, memtest86+
uuid      755ed3e1-4ac3-4987-8e91-a70902fbc05a
kernel      /boot/memtest86+.bin
quiet

Per sovrascriverlo (non si hanno i permessi sufficienti) bisogna lanciare questo comando

Codice: Seleziona tutto

sudo gedit /boot/grub/menu.lst

Nel caso non si avvii ubuntu neanche in questo modo ho un'altra idea, quindi facci sapere