quello credo che dipenda dal momento in cui effettui la misurazione... il dualcore carica alternativamente su 1 e su 0... fondamentalmente per lo stesso motivo per cui i dualcore non sono due volte più prestanti di una cpu singola.La gestione della CPU (per quel poco che si vede) è corretta, noto solo che carica un pò più sulla "1" invece che sulla "0" come fa sul mio:
Codice: Seleziona tutto
noapic pnpacpi=offi due successivi li puoi pure provare, ma non sono specifici al problema che riscontri.kernel /vmlinuz-2.6.32-4-generic root=UUID=a6eb9fbb-0ffe-4af0-90c2-6ed7af88a2b1 ro noapic pnpacpi=off nomodeset mem=nopentium resume=/dev/sda6
Codice: Seleziona tutto
[ 0.860903] ACPI: WMI: Mapper loaded
[ 0.860903] PCI: Using ACPI for IRQ routing
[ 0.860903] Bluetooth: Core ver 2.15
[ 0.860903] NET: Registered protocol family 31
[ 0.860903] Bluetooth: HCI device and connection manager initialized
[ 0.860903] Bluetooth: HCI socket layer initialized
[ 0.860903] NetLabel: Initializing
[ 0.860903] NetLabel: domain hash size = 128
[ 0.860903] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.860903] NetLabel: unlabeled traffic allowed by default
[ 0.860903] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[ 0.860903] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.870036] hpet: hpet2 irq 24 for MSI
[ 0.870051] Switching to clocksource hpet
[ 0.871815] pnp: PnP ACPI init
[ 0.871844] ACPI: bus type pnp registered
[ 0.876215] pnp: PnP ACPI: found 11 devices
[ 0.876218] ACPI: ACPI bus type pnp unregistered
[ 0.876233] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.876236] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.876247] system 00:09: ioport range 0x400-0x4cf has been reserved
[ 0.876251] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.876253] system 00:09: ioport range 0x4d6-0x4d6 has been reserved
[ 0.876257] system 00:09: ioport range 0x680-0x6ff has been reserved
[ 0.876261] system 00:09: ioport range 0x77a-0x77a has been reserved
[ 0.876264] system 00:09: ioport range 0xc00-0xc01 has been reserved
[ 0.876267] system 00:09: ioport range 0xc14-0xc14 has been reserved
[ 0.876270] system 00:09: ioport range 0xc50-0xc52 has been reserved
[ 0.876273] system 00:09: ioport range 0xc6c-0xc6c has been reserved
[ 0.876277] system 00:09: ioport range 0xc6f-0xc6f has been reserved
[ 0.876280] system 00:09: ioport range 0xcd0-0xcdb has been reserved
[ 0.876283] system 00:09: ioport range 0x800-0x804 has been reserved
[ 0.876286] system 00:09: ioport range 0xb00-0xb3f has been reserved
[ 0.876289] system 00:09: ioport range 0xcdc-0xcdf has been reserved
[ 0.876297] system 00:0a: iomem range 0xff800000-0xff80ffff has been reserved
[ 0.876301] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved
[ 0.876304] system 00:0a: iomem range 0xfeb00000-0xfeb00fff has been reserved
[ 0.876308] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.881062] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
[ 0.881120] pci 0000:04:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
[ 0.881218] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.881221] pci 0000:00:02.0: IO window: 0x6000-0x6fff
[ 0.881227] pci 0000:00:02.0: MEM window: 0xf6300000-0xf63fffff
[ 0.881231] pci 0000:00:02.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 0.881237] pci 0000:00:04.0: PCI bridge, secondary bus 0000:08
[ 0.881240] pci 0000:00:04.0: IO window: 0x5000-0x5fff
[ 0.881245] pci 0000:00:04.0: MEM window: 0xf5300000-0xf62fffff
[ 0.881263] pci 0000:00:04.0: PREFETCH window: 0x000000f0000000-0x000000f0ffffff
[ 0.881270] pci 0000:00:05.0: PCI bridge, secondary bus 0000:04
[ 0.881273] pci 0000:00:05.0: IO window: 0x3000-0x4fff
[ 0.881278] pci 0000:00:05.0: MEM window: 0xf4300000-0xf52fffff
[ 0.881282] pci 0000:00:05.0: PREFETCH window: 0x000000f1000000-0x000000f20fffff
[ 0.881288] pci 0000:00:06.0: PCI bridge, secondary bus 0000:05
[ 0.881291] pci 0000:00:06.0: IO window: 0x2000-0x2fff
[ 0.881296] pci 0000:00:06.0: MEM window: 0xf3200000-0xf42fffff
[ 0.881300] pci 0000:00:06.0: PREFETCH window: 0x000000f2100000-0x000000f30fffff
[ 0.881306] pci 0000:00:07.0: PCI bridge, secondary bus 0000:06
[ 0.881308] pci 0000:00:07.0: IO window: disabled
[ 0.881312] pci 0000:00:07.0: MEM window: disabled
[ 0.881315] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.881320] pci 0000:00:14.4: PCI bridge, secondary bus 0000:07
[ 0.881324] pci 0000:00:14.4: IO window: 0x1000-0x1fff
[ 0.881330] pci 0000:00:14.4: MEM window: 0xf3100000-0xf31fffff
[ 0.881336] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.881351] alloc irq_desc for 18 on node -1
[ 0.881355] alloc kstat_irqs on node -1
[ 0.881361] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.881368] pci 0000:00:02.0: setting latency timer to 64
[ 0.881375] alloc irq_desc for 16 on node -1
[ 0.881377] alloc kstat_irqs on node -1
[ 0.881382] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.881386] pci 0000:00:04.0: setting latency timer to 64
[ 0.881393] alloc irq_desc for 17 on node -1
[ 0.881395] alloc kstat_irqs on node -1
[ 0.881399] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.881403] pci 0000:00:05.0: setting latency timer to 64
[ 0.881411] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.881414] pci 0000:00:06.0: setting latency timer to 64
[ 0.881422] alloc irq_desc for 19 on node -1
[ 0.881423] alloc kstat_irqs on node -1
[ 0.881427] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.881432] pci 0000:00:07.0: setting latency timer to 64
[ 0.881442] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.881446] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.881450] pci_bus 0000:01: resource 0 io: [0x6000-0x6fff]
[ 0.881452] pci_bus 0000:01: resource 1 mem: [0xf6300000-0xf63fffff]
[ 0.881456] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.881460] pci_bus 0000:08: resource 0 io: [0x5000-0x5fff]
[ 0.881463] pci_bus 0000:08: resource 1 mem: [0xf5300000-0xf62fffff]
[ 0.881465] pci_bus 0000:08: resource 2 pref mem [0xf0000000-0xf0ffffff]
[ 0.881469] pci_bus 0000:04: resource 0 io: [0x3000-0x4fff]
[ 0.881471] pci_bus 0000:04: resource 1 mem: [0xf4300000-0xf52fffff]
[ 0.881474] pci_bus 0000:04: resource 2 pref mem [0xf1000000-0xf20fffff]
[ 0.881478] pci_bus 0000:05: resource 0 io: [0x2000-0x2fff]
[ 0.881480] pci_bus 0000:05: resource 1 mem: [0xf3200000-0xf42fffff]
[ 0.881483] pci_bus 0000:05: resource 2 pref mem [0xf2100000-0xf30fffff]
[ 0.881487] pci_bus 0000:07: resource 0 io: [0x1000-0x1fff]
[ 0.881489] pci_bus 0000:07: resource 1 mem: [0xf3100000-0xf31fffff]
[ 0.881541] NET: Registered protocol family 2
[ 0.881744] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.883318] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.888393] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.889003] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.889007] TCP reno registered
[ 0.889138] NET: Registered protocol family 1
[ 1.081313] pci 0000:01:00.0: Boot video device
[ 1.081390] Trying to unpack rootfs image as initramfs...
[ 1.284955] Freeing initrd memory: 7852k freed
[ 1.289531] Simple Boot Flag at 0x44 set to 0x1
[ 1.289741] Scanning for low memory corruption every 60 seconds
[ 1.289930] audit: initializing netlink socket (disabled)
[ 1.289946] type=2000 audit(1259522253.281:1): initialized
[ 1.300479] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.302012] VFS: Disk quotas dquot_6.5.2
[ 1.302078] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.302785] fuse init (API version 7.13)
[ 1.302869] msgmni has been set to 7921
[ 1.303179] alg: No test for stdrng (krng)
[ 1.303191] io scheduler noop registered
[ 1.303193] io scheduler anticipatory registered
[ 1.303196] io scheduler deadline registered
[ 1.303237] io scheduler cfq registered (default)
[ 1.303404] alloc irq_desc for 25 on node -1
[ 1.303407] alloc kstat_irqs on node -1
[ 1.303420] pcieport 0000:00:02.0: irq 25 for MSI/MSI-X
[ 1.303431] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.303540] alloc irq_desc for 26 on node -1
[ 1.303542] alloc kstat_irqs on node -1
[ 1.303548] pcieport 0000:00:04.0: irq 26 for MSI/MSI-X
[ 1.303555] pcieport 0000:00:04.0: setting latency timer to 64
[ 1.303666] alloc irq_desc for 27 on node -1
[ 1.303668] alloc kstat_irqs on node -1
[ 1.303675] pcieport 0000:00:05.0: irq 27 for MSI/MSI-X
[ 1.303681] pcieport 0000:00:05.0: setting latency timer to 64
[ 1.303786] alloc irq_desc for 28 on node -1
[ 1.303788] alloc kstat_irqs on node -1
[ 1.303794] pcieport 0000:00:06.0: irq 28 for MSI/MSI-X
[ 1.303801] pcieport 0000:00:06.0: setting latency timer to 64
[ 1.303905] alloc irq_desc for 29 on node -1
[ 1.303907] alloc kstat_irqs on node -1
[ 1.303913] pcieport 0000:00:07.0: irq 29 for MSI/MSI-X
[ 1.303920] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.304020] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.304515] pciehp 0000:00:04.0:pcie04: HPC vendor_id 1022 device_id 9604 ss_vid 0 ss_did 0
[ 1.304559] pciehp 0000:00:04.0:pcie04: service driver pciehp loaded
[ 1.304568] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.304756] ACPI: AC Adapter [ADP0] (on-line)
[ 1.304871] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.304876] ACPI: Power Button [PWRB]
[ 1.304921] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.308123] ACPI: Lid Switch [LID]
[ 1.308194] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.308198] ACPI: Power Button [PWRF]
[ 1.308365] fan PNP0C0B:00: registered as cooling_device0
[ 1.308373] ACPI: Fan [FAN1] (off)
[ 1.308847] processor LNXCPU:00: registered as cooling_device1
[ 1.308924] processor LNXCPU:01: registered as cooling_device2
[ 1.325452] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.325460] ACPI: Thermal Zone [THZN] (59 C)
[ 1.325669] ACPI: Battery Slot [BAT0] (battery absent)
[ 1.327013] Linux agpgart interface v0.103
[ 1.327020] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.328406] brd: module loaded
[ 1.328943] loop: module loaded
[ 1.329040] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.329178] ahci 0000:00:11.0: version 3.0
[ 1.329202] alloc irq_desc for 22 on node -1
[ 1.329205] alloc kstat_irqs on node -1
[ 1.329214] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.329410] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.329414] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio ccc
[ 1.330143] scsi0 : ahci
[ 1.330302] scsi1 : ahci
[ 1.330375] scsi2 : ahci
[ 1.330454] scsi3 : ahci
[ 1.330529] scsi4 : ahci
[ 1.330605] scsi5 : ahci
[ 1.330897] ata1: SATA max UDMA/133 abar m1024@0xf6408000 port 0xf6408100 irq 22
[ 1.330902] ata2: SATA max UDMA/133 abar m1024@0xf6408000 port 0xf6408180 irq 22
[ 1.330907] ata3: SATA max UDMA/133 abar m1024@0xf6408000 port 0xf6408200 irq 22
[ 1.330911] ata4: SATA max UDMA/133 abar m1024@0xf6408000 port 0xf6408280 irq 22
[ 1.330916] ata5: SATA max UDMA/133 abar m1024@0xf6408000 port 0xf6408300 irq 22
[ 1.330921] ata6: SATA max UDMA/133 abar m1024@0xf6408000 port 0xf6408380 irq 22
[ 1.331260] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.331301] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.331397] scsi6 : pata_atiixp
[ 1.331464] scsi7 : pata_atiixp
[ 1.332709] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x7000 irq 14
[ 1.332712] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x7008 irq 15
[ 1.333546] Fixed MDIO Bus: probed
[ 1.333589] PPP generic driver version 2.4.2
[ 1.333721] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.333749] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.333779] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 1.333784] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.333840] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.333880] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.333899] ehci_hcd 0000:00:12.2: debug port 1
[ 1.333933] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf6408500
[ 1.360044] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.360124] usb usb1: configuration #1 chosen from 1 choice
[ 1.360159] hub 1-0:1.0: USB hub found
[ 1.360170] hub 1-0:1.0: 6 ports detected
[ 1.360353] ehci_hcd 0000:00:13.2: power state changed by ACPI to D0
[ 1.360365] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.360381] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 1.360387] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.360423] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.360463] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.360480] ehci_hcd 0000:00:13.2: debug port 1
[ 1.360506] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf6408400
[ 1.380044] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.380100] usb usb2: configuration #1 chosen from 1 choice
[ 1.380126] hub 2-0:1.0: USB hub found
[ 1.380134] hub 2-0:1.0: 6 ports detected
[ 1.380211] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.380236] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.380253] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 1.380258] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.380291] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.380336] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf6407000
[ 1.434111] usb usb3: configuration #1 chosen from 1 choice
[ 1.434138] hub 3-0:1.0: USB hub found
[ 1.434153] hub 3-0:1.0: 3 ports detected
[ 1.434217] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.434230] ohci_hcd 0000:00:12.1: setting latency timer to 64
[ 1.434234] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.434269] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.434300] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf6406000
[ 1.494188] usb usb4: configuration #1 chosen from 1 choice
[ 1.494215] hub 4-0:1.0: USB hub found
[ 1.494230] hub 4-0:1.0: 3 ports detected
[ 1.494313] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.494325] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 1.494329] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.494361] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.494387] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf6405000
[ 1.554236] usb usb5: configuration #1 chosen from 1 choice
[ 1.554273] hub 5-0:1.0: USB hub found
[ 1.554294] hub 5-0:1.0: 3 ports detected
[ 1.554394] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.554430] ohci_hcd 0000:00:13.1: setting latency timer to 64
[ 1.554436] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.554493] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.554523] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf6404000
[ 1.614128] usb usb6: configuration #1 chosen from 1 choice
[ 1.614155] hub 6-0:1.0: USB hub found
[ 1.614167] hub 6-0:1.0: 3 ports detected
[ 1.614245] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.614393] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.639860] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.639868] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.639995] mice: PS/2 mouse device common for all mice
[ 1.640088] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 1.640625] rtc_cmos 00:05: RTC can wake from S4
[ 1.640672] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.640702] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.640865] device-mapper: uevent: version 1.0.3
[ 1.640998] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.641145] device-mapper: multipath: version 1.1.0 loaded
[ 1.641149] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.641414] cpuidle: using governor ladder
[ 1.641416] cpuidle: using governor menu
[ 1.641892] TCP cubic registered
[ 1.642041] NET: Registered protocol family 10
[ 1.642604] lo: Disabled Privacy Extensions
[ 1.642938] NET: Registered protocol family 17
[ 1.642968] Bluetooth: L2CAP ver 2.14
[ 1.642969] Bluetooth: L2CAP socket layer initialized
[ 1.642973] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.642975] Bluetooth: SCO socket layer initialized
[ 1.643055] Bluetooth: RFCOMM TTY layer initialized
[ 1.643063] Bluetooth: RFCOMM socket layer initialized
[ 1.643065] Bluetooth: RFCOMM ver 1.11
[ 1.643087] powernow-k8: Found 1 AMD Athlon(tm) X2 Dual-Core QL-64 processors (2 cpu cores) (version 2.20.00)
[ 1.643143] powernow-k8: 0 : pstate 0 (2100 MHz)
[ 1.643145] powernow-k8: 1 : pstate 1 (1050 MHz)
[ 1.643746] PM: Resume from disk failed.
[ 1.643760] registered taskstats version 1
[ 1.644454] Magic number: 1:945:294
[ 1.644484] misc hpet: hash matches
[ 1.644495] tty tty27: hash matches
[ 1.644598] rtc_cmos 00:05: setting system clock to 2009-11-29 19:17:34 UTC (1259522254)
[ 1.644601] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.644603] EDD information not available.
[ 1.668751] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.671341] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.671382] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.671416] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.671449] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.850046] ata1: softreset failed (device not ready)
[ 1.850101] ata1: applying SB600 PMP SRST workaround and retrying
[ 1.850118] ata3: softreset failed (device not ready)
[ 1.850163] ata3: applying SB600 PMP SRST workaround and retrying
[ 1.860059] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 2.025998] usb 2-2: configuration #1 chosen from 1 choice
[ 2.031301] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.031328] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.032444] ata1.00: ATA-8: Hitachi HTS543225L9SA00, FBEOC43C, max UDMA/133
[ 2.032448] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.033799] ata1.00: configured for UDMA/133
[ 2.033922] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54322 FBEO PQ: 0 ANSI: 5
[ 2.034081] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.034156] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.034203] sd 0:0:0:0: [sda] Write Protect is off
[ 2.034207] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.034231] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.034372] sda:
[ 2.046158] ata3.00: ATAPI: TSSTcorp CDDVDW TS-L633A, TO03, max UDMA/100, ATAPI AN
[ 2.059824] ata3.00: configured for UDMA/100
[ 2.059960] sda1 sda2 sda3 sda4 <
[ 2.064533] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A TO03 PQ: 0 ANSI: 5
[ 2.075141] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.075145] Uniform CD-ROM driver Revision: 3.20
[ 2.075264] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.075313] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.079967] sda5 sda6 >
[ 2.099312] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.243252] Freeing unused kernel memory: 724k freed
[ 2.243629] Write protecting the kernel read-only data: 7788k
[ 2.341306] usb 3-1: new low speed USB device using ohci_hcd and address 2
[ 2.385629] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.385658] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.385724] r8169 0000:04:00.0: setting latency timer to 64
[ 2.385766] alloc irq_desc for 30 on node -1
[ 2.385769] alloc kstat_irqs on node -1
[ 2.385785] r8169 0000:04:00.0: irq 30 for MSI/MSI-X
[ 2.386454] eth0: RTL8102e at 0xffffc90000670000, 00:1e:33:dc:22:cb, XID 14a00000 IRQ 30
[ 2.532328] usb 3-1: configuration #1 chosen from 1 choice
[ 2.555515] acpi device:07: registered as cooling_device3
[ 2.555674] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input5
[ 2.555719] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 2.558782] alloc irq_desc for 20 on node -1
[ 2.558788] alloc kstat_irqs on node -1
[ 2.558799] ohci1394 0000:07:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.558807] ohci1394 0000:07:06.0: setting latency timer to 64
[ 2.565421] usbcore: registered new interface driver hiddev
[ 2.569456] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input6
[ 2.569557] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:12.0-1/input0
[ 2.569604] usbcore: registered new interface driver usbhid
[ 2.569608] usbhid: v2.6:USB HID core driver
[ 2.613356] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[f3100000-f31007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 2.841307] usb 3-2: new full speed USB device using ohci_hcd and address 3
[ 3.105142] usb 3-2: configuration #1 chosen from 2 choices
[ 3.723239] PM: Starting manual resume from disk
[ 3.723246] PM: Resume from partition 8:6
[ 3.723247] PM: Checking hibernation image.
[ 3.723491] PM: Error -22 checking image file
[ 3.723492] PM: Resume from disk failed.
[ 3.757703] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 3.931578] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00080d1e33dc22cb]
[ 5.146935] Adding 1718912k swap on /dev/sda6. Priority:-1 extents:1 across:1718912k
[ 5.562849] udev: starting version 147
[ 6.377350] EDAC MC: Ver: 2.1.0 Nov 20 2009
[ 6.385747] EDAC amd64_edac: Ver: 3.2.0 Nov 20 2009
[ 6.385824] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 6.385836] EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded.
[ 6.385837] Either Enable ECC in the BIOS, or set 'ecc_enable_override'.
[ 6.385838] Also, use of the override can cause unknown side effects.
[ 6.385847] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 6.657795] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.681819] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 6.681825] ricoh-mmc: Copyright(c) Philip Langdale
[ 6.681871] ricoh-mmc: Ricoh MMC controller found at 0000:07:06.2 [1180:0843] (rev 12)
[ 6.681896] ricoh-mmc: Controller is now disabled.
[ 6.729068] lp: driver loaded but no devices found
[ 6.824211] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.872142] sdhci: Secure Digital Host Controller Interface driver
[ 6.872145] sdhci: Copyright(c) Pierre Ossman
[ 6.899126] cfg80211: Calling CRDA to update world regulatory domain
[ 6.915140] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.038274] sdhci-pci 0000:07:06.1: SDHCI controller found [1180:0822] (rev 22)
[ 7.038300] alloc irq_desc for 21 on node -1
[ 7.038303] alloc kstat_irqs on node -1
[ 7.038313] sdhci-pci 0000:07:06.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 7.039414] sdhci-pci 0000:07:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 7.039424] sdhci-pci 0000:07:06.1: setting latency timer to 64
[ 7.040584] Registered led device: mmc0::
[ 7.041787] mmc0: SDHCI controller on PCI [0000:07:06.1] using DMA
[ 7.065721] ath5k 0000:05:00.0: enabling device (0000 -> 0002)
[ 7.065733] ath5k 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 7.065750] ath5k 0000:05:00.0: setting latency timer to 64
[ 7.065826] ath5k 0000:05:00.0: registered as 'phy0'
[ 7.085732] Linux video capture interface: v2.00
[ 7.124113] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[ 7.128453] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input7
[ 7.128518] usbcore: registered new interface driver uvcvideo
[ 7.128522] USB Video Class driver (v0.1.0)
[ 7.165267] ath: EEPROM regdomain: 0x65
[ 7.165272] ath: EEPROM indicates we should expect a direct regpair map
[ 7.165277] ath: Country alpha2 being used: 00
[ 7.165279] ath: Regpair used: 0x65
[ 7.185974] phy0: Selected rate control algorithm 'minstrel'
[ 7.186767] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 7.709470] cfg80211: World regulatory domain updated:
[ 7.709475] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.709478] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.709482] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.709485] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.709488] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.709490] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.017330] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04711/0xa04000
[ 8.097505] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 8.536302] usbcore: registered new interface driver snd-usb-audio
[ 8.651817] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.651901] HDA Intel 0000:00:14.2: setting latency timer to 64
[ 9.104338] hda_codec: ALC268: BIOS auto-probing.
[ 9.104888] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9
[ 10.426434] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 10.428225] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 10.428232] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 10.428234] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 11.549271] r8169: eth0: link up
[ 11.549280] r8169: eth0: link up
[ 11.917624] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.209293] usplash:419 freeing invalid memtype ffffffffe0000000-ffffffffe1000000
[ 15.660431] ppdev: user-space parallel port driver
[ 15.705342] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 15.920378] [drm] Initialized drm 1.1.0 20060810
[ 16.311979] [drm] radeon defaulting to userspace modesetting.
[ 16.312932] pci 0000:01:00.0: setting latency timer to 64
[ 16.313222] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
[ 17.223345] CPU0 attaching NULL sched-domain.
[ 17.223361] CPU1 attaching NULL sched-domain.
[ 17.251422] CPU0 attaching sched-domain:
[ 17.251430] domain 0: span 0-1 level MC
[ 17.251436] groups: 0 1
[ 17.251446] CPU1 attaching sched-domain:
[ 17.251450] domain 0: span 0-1 level MC
[ 17.251455] groups: 1 0
[ 17.453996] [drm] Setting GART location based on new memory map
[ 17.454576] [drm] Loading RV620 CP Microcode
[ 17.454585] platform r600_cp.0: firmware: requesting radeon/RV620_pfp.bin
[ 17.532835] platform r600_cp.0: firmware: requesting radeon/RV620_me.bin
[ 17.579664] [drm] Resetting GPU
[ 17.579729] [drm] writeback test succeeded in 1 usecs
[ 21.731276] eth0: no IPv6 routers present
[ 21.925520] CPU0 attaching NULL sched-domain.
[ 21.925530] CPU1 attaching NULL sched-domain.
[ 21.951483] CPU0 attaching sched-domain:
[ 21.951494] domain 0: span 0-1 level MC
[ 21.951501] groups: 0 1
[ 21.951514] CPU1 attaching sched-domain:
[ 21.951518] domain 0: span 0-1 level MC
[ 21.951524] groups: 1 0
Codice: Seleziona tutto
[ 16.311979] [drm] radeon defaulting to userspace modesetting.
[ 17.454585] platform r600_cp.0: firmware: requesting radeon/RV620_pfp.bin
[ 17.532835] platform r600_cp.0: firmware: requesting radeon/RV620_me.bin
[ 17.579664] [drm] Resetting GPU
[ 17.579729] [drm] writeback test succeeded in 1 usecsCodice: Seleziona tutto
dmesg > dmesg.txtCodice: Seleziona tutto
cat /var/log/Xorg.0.log > xorg0.txtCodice: Seleziona tutto
cat /var/log/Xorg.1.log > xorg1.txtCodice: Seleziona tutto
Intel ACPI Component Architecture
ASL Optimizing Compiler version 20090521 [Jun 30 2009]
Copyright (C) 2000 - 2009 Intel Corporation
Supports ACPI Specification Revision 3.0a
dsdt.dsl 1: ACPID, 8,
Error 4095 - ^ syntax error, unexpected PARSEOP_NAMESEG, expecting PARSEOP_DEFINITIONBLOCK
ASL Input: dsdt.dsl - 9064 lines, 329940 bytes, 0 keywords
Compilation complete. 1 Errors, 0 Warnings, 0 Remarks, 0 Optimizations
Codice: Seleziona tutto
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
Kernel driver in use: ahci
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
Kernel driver in use: ohci_hcd
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
Kernel driver in use: ohci_hcd
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
Kernel driver in use: ehci_hcd
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
Kernel driver in use: ohci_hcd
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
Kernel driver in use: ohci_hcd
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
Kernel driver in use: ehci_hcd
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller
Kernel driver in use: pata_atiixp
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
Kernel modules: shpchp
00:18.0 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] HyperTransport Configuration (rev 40)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h [Turion X2, Athlon X2, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] DRAM Controller
Kernel modules: amd64_edac_mod
00:18.3 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] Link Control
01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3400 Series
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Kernel driver in use: r8169
Kernel modules: r8169
05:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Kernel driver in use: ath5k
Kernel modules: ath5k
07:06.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
Kernel driver in use: ohci1394
Kernel modules: firewire-ohci, ohci1394
07:06.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci
07:06.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
Kernel driver in use: ricoh-mmc
Kernel modules: ricoh_mmc
07:06.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
07:06.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
Codice: Seleziona tutto
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.341533] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.341535] mtrr: probably your BIOS does not setup all CPUs.
[ 0.341538] mtrr: corrected configuration.
[ 1.671341] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.671382] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.671416] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.671449] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.850046] ata1: softreset failed (device not ready)Codice: Seleziona tutto
cat /proc/mtrrCodice: Seleziona tutto
cat /proc/interruptsCodice: Seleziona tutto
reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
reg02: base=0x0c0000000 ( 3072MB), size= 512MB, count=1: write-back
reg03: base=0x0fff00000 ( 4095MB), size= 1MB, count=1: write-protect
reg04: base=0x100000000 ( 4096MB), size= 512MB, count=1: write-back
reg05: base=0x0e0000000 ( 3584MB), size= 256MB, count=1: write-combining
reg07: base=0x0dfe3e000 ( 3582MB), size= 4KB, count=1: uncachable
Codice: Seleziona tutto
CPU0 CPU1
0: 29 36 IO-APIC-edge timer
1: 20 4450 IO-APIC-edge i8042
7: 1 0 IO-APIC-edge
8: 0 1 IO-APIC-edge rtc0
9: 0 3 IO-APIC-fasteoi acpi
12: 53 29716 IO-APIC-edge i8042
14: 0 0 IO-APIC-edge pata_atiixp
15: 0 0 IO-APIC-edge pata_atiixp
16: 239 227701 IO-APIC-fasteoi ohci_hcd:usb3, ohci_hcd:usb4, HDA Intel
17: 0 3 IO-APIC-fasteoi ehci_hcd:usb1
18: 6 4179 IO-APIC-fasteoi ohci_hcd:usb5, ohci_hcd:usb6, ath, radeon@pci:0000:01:00.0
19: 0 32 IO-APIC-fasteoi ehci_hcd:usb2
20: 0 2 IO-APIC-fasteoi ohci1394
21: 0 0 IO-APIC-fasteoi mmc0
22: 230 83999 IO-APIC-fasteoi ahci
24: 476800 0 HPET_MSI-edge hpet2
26: 0 0 PCI-MSI-edge pciehp
30: 60 26738 PCI-MSI-edge eth0
NMI: 0 0 Non-maskable interrupts
LOC: 70 537852 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 0 0 Performance monitoring interrupts
PND: 0 0 Performance pending work
RES: 128694 66636 Rescheduling interrupts
CAL: 95 52 Function call interrupts
TLB: 3734 2369 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 36 36 Machine check polls
ERR: 1
MIS: 0
dsdtdsl1.txt dsdtdsl2.txt dsdtdsl3.txt dmesgkttnbrg.txt Visualizzano questa sezione: 0 utenti iscritti e 7 ospiti