[RISOLTO]non riesco a far funzionare la mia webcam con skype
[RISOLTO]non riesco a far funzionare la mia webcam con skype
Salve ragazzi,
la mia webcam è una Creative Live! Cam Vista IM VF0420 ho installato tutti driver poichè se uso programmi tipo cheese o mumble funzionano ma con skype non riesco nè a vedermi e nè ad impostare il microfono della webcam per l'audio.
Perchè?
La versione di skype è la 2.1.0.47 scaricata direttamente dal sito.
la mia webcam è una Creative Live! Cam Vista IM VF0420 ho installato tutti driver poichè se uso programmi tipo cheese o mumble funzionano ma con skype non riesco nè a vedermi e nè ad impostare il microfono della webcam per l'audio.
Perchè?
La versione di skype è la 2.1.0.47 scaricata direttamente dal sito.
Ultima modifica di samick82 il sabato 28 novembre 2009, 21:42, modificato 1 volta in totale.
Re: non riesco a far funzionare la mia webcam con skype
Se la tua webcam usa i moduli ov51x-jpeg, prova a passare questo comando da terminale
e vedi se skype va
Codice: Seleziona tutto
% echo "options ov51x-jpeg forceblock=1" | sudo tee -a /etc/modprobe.d/options
Re: non riesco a far funzionare la mia webcam con skype
se lo faccio mi esce
samuele@samuele-desktop:~$ % echo "options ov51x-jpeg forceblock=1" | sudo tee -a /etc/modprobe.d/options
%: command not found
perchè?
Ripeto se uso chese o mumble la web cam va...
samuele@samuele-desktop:~$ % echo "options ov51x-jpeg forceblock=1" | sudo tee -a /etc/modprobe.d/options
%: command not found
perchè?
Ripeto se uso chese o mumble la web cam va...
Re: non riesco a far funzionare la mia webcam con skype
Prova così:
Da terminale
e alla fine inserisci
scollega e ricollega la webcam e vedi se va
Da terminale
Codice: Seleziona tutto
sudo gedit /etc/modprobe.d/optionsCodice: Seleziona tutto
options ov51x-jpeg forceblock=1Re: non riesco a far funzionare la mia webcam con skype
mi si apre un foglio bianco di getit ed ho ricopiato la stringa da te scritta.
Ho aperto skype e se vado in opzioni/dispositivi video/ mi esce montata la mia web cam "VF0420 Live! Cam Vista IM (/dev/video0)" ma se clicco su prova mi si accende la web cam perchè si accende la lucetta blu ma nel quadratino invece di vedere la mi skifosissima faccia vedo solo striscie verdi.
Se vado in dispositivi audio a microfono nn sta scritto la webcam ma "pulse audio server local" se faccio effettua una chiamata di prova non prende la mia voce.
Che posso fare?
Ho aperto skype e se vado in opzioni/dispositivi video/ mi esce montata la mia web cam "VF0420 Live! Cam Vista IM (/dev/video0)" ma se clicco su prova mi si accende la web cam perchè si accende la lucetta blu ma nel quadratino invece di vedere la mi skifosissima faccia vedo solo striscie verdi.
Se vado in dispositivi audio a microfono nn sta scritto la webcam ma "pulse audio server local" se faccio effettua una chiamata di prova non prende la mia voce.
Che posso fare?
Re: non riesco a far funzionare la mia webcam con skype
Modifica la stringa che ti avevo suggerito così
e riprova. Comunque per maggiori informazioni guarda qui.
Per quanto riguarda il microfono, è integrato nella webcam?
Codice: Seleziona tutto
options ov51x-jpeg force_palette=13 forceblock=1Per quanto riguarda il microfono, è integrato nella webcam?
Re: non riesco a far funzionare la mia webcam con skype
Si ovvio, altrimenti non te lo avrei detto, no?
Cmq l'ho fatto ma nn va uguale.
Ho provato a leggere ma nn ci capisco nulla... Sono ancora un neonato di ubuntu...
Cmq l'ho fatto ma nn va uguale.
Ho provato a leggere ma nn ci capisco nulla... Sono ancora un neonato di ubuntu...
Ultima modifica di samick82 il sabato 28 novembre 2009, 16:41, modificato 1 volta in totale.
Re: non riesco a far funzionare la mia webcam con skype
Senti mi posteresti la risposta a questi comandi dati da terminale?
che versione di *buntu stai usando?
Codice: Seleziona tutto
lsusb
lsmod
dmesgRe: non riesco a far funzionare la mia webcam con skype
lsub[/font]
Bus 002 Device 002: ID 0d49:3200 Maxtor
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 003: ID 041e:4064 Creative Technology, Ltd
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 003: ID 1307:0330 Transcend Information, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
lsmod:
Module Size Used by
isofs 31620 0
udf 80900 0
crc_itu_t 1852 1 udf
usblp 12636 0
binfmt_misc 8356 1
ppdev 6688 0
snd_usb_audio 84320 1
snd_usb_lib 16316 1 snd_usb_audio
snd_hda_codec_realtek 203328 1
snd_hda_intel 26984 4
snd_hda_codec 75708 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 7200 2 snd_usb_audio,snd_hda_codec
snd_pcm_oss 37920 0
snd_mixer_oss 16028 1 snd_pcm_oss
snd_pcm 75488 5 snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 2656 0
snd_seq_oss 28576 0
snd_seq_midi 6432 0
snd_rawmidi 22208 2 snd_usb_lib,snd_seq_midi
snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi
snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
iptable_filter 3100 0
snd_timer 22276 2 snd_pcm,snd_seq
ip_tables 11692 1 iptable_filter
snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
gspca_ov519 25440 0
gspca_main 22844 1 gspca_ov519
snd 59204 22 snd_usb_audio,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
lp 8964 0
x_tables 16544 1 ip_tables
psmouse 56500 0
videodev 36736 1 gspca_main
soundcore 7264 1 snd
parport 35340 2 ppdev,lp
v4l1_compat 14496 1 videodev
snd_page_alloc 9252 2 snd_hda_intel,snd_pcm
serio_raw 5280 0
asus_atk0110 8252 0
nvidia 7090664 34
floppy 54980 0
ohci1394 30220 0
atl1e 31888 0
ieee1394 86628 1 ohci1394
usb_storage 52608 1
intel_agp 27748 0
agpgart 35020 2 nvidia,intel_agp
dmesg
[ 0.800148] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.800170] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.800183] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.800187] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.800189] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.800207] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.800226] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 0.800279] usb usb3: configuration #1 chosen from 1 choice
[ 0.800296] hub 3-0:1.0: USB hub found
[ 0.800300] hub 3-0:1.0: 2 ports detected
[ 0.800333] alloc irq_desc for 21 on node -1
[ 0.800334] alloc kstat_irqs on node -1
[ 0.800337] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.800341] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.800343] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.800364] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.800387] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.800434] usb usb4: configuration #1 chosen from 1 choice
[ 0.800451] hub 4-0:1.0: USB hub found
[ 0.800455] hub 4-0:1.0: 2 ports detected
[ 0.800483] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.800487] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.800489] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.800509] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.800527] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 0.800574] usb usb5: configuration #1 chosen from 1 choice
[ 0.800590] hub 5-0:1.0: USB hub found
[ 0.800594] hub 5-0:1.0: 2 ports detected
[ 0.800625] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.800629] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.800631] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.800649] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.800666] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 0.800716] usb usb6: configuration #1 chosen from 1 choice
[ 0.800733] hub 6-0:1.0: USB hub found
[ 0.800736] hub 6-0:1.0: 2 ports detected
[ 0.800767] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.800771] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.800773] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.800791] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.800809] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.800859] usb usb7: configuration #1 chosen from 1 choice
[ 0.800875] hub 7-0:1.0: USB hub found
[ 0.800879] hub 7-0:1.0: 2 ports detected
[ 0.800909] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.800913] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.800916] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.800937] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.800955] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 0.801004] usb usb8: configuration #1 chosen from 1 choice
[ 0.801022] hub 8-0:1.0: USB hub found
[ 0.801026] hub 8-0:1.0: 2 ports detected
[ 0.801092] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.803300] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.803304] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.803341] mice: PS/2 mouse device common for all mice
[ 0.803407] rtc_cmos 00:03: RTC can wake from S4
[ 0.803428] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.803447] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.803511] device-mapper: uevent: version 1.0.3
[ 0.803560] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.803603] device-mapper: multipath: version 1.1.0 loaded
[ 0.803604] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.803675] EISA: Probing bus 0 at eisa.0
[ 0.803697] EISA: Detected 0 cards.
[ 0.803747] cpuidle: using governor ladder
[ 0.803749] cpuidle: using governor menu
[ 0.804060] TCP cubic registered
[ 0.804161] NET: Registered protocol family 10
[ 0.804462] lo: Disabled Privacy Extensions
[ 0.804679] NET: Registered protocol family 17
[ 0.804690] Bluetooth: L2CAP ver 2.13
[ 0.804691] Bluetooth: L2CAP socket layer initialized
[ 0.804693] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.804694] Bluetooth: SCO socket layer initialized
[ 0.804711] Bluetooth: RFCOMM TTY layer initialized
[ 0.804712] Bluetooth: RFCOMM socket layer initialized
[ 0.804714] Bluetooth: RFCOMM ver 1.11
[ 0.805065] Using IPI No-Shortcut mode
[ 0.805102] PM: Resume from disk failed.
[ 0.805109] registered taskstats version 1
[ 0.805189] Magic number: 1:731:1006
[ 0.805199] system 00:08: hash matches
[ 0.805230] rtc_cmos 00:03: setting system clock to 2009-11-27 22:00:00 UTC (1259359200)
[ 0.805232] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.805234] EDD information not available.
[ 0.822412] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.940356] ata5.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB04, max UDMA/33
[ 0.940544] ata5.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[ 0.940547] ata5.01: 160086528 sectors, multi 0: LBA
[ 0.956368] ata5.00: configured for UDMA/33
[ 0.972556] ata5.01: configured for UDMA/100
[ 1.090527] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.101030] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.101050] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 1.233256] usb 1-2: configuration #1 chosen from 1 choice
[ 1.233493] hub 1-2:1.0: USB hub found
[ 1.233838] hub 1-2:1.0: 4 ports detected
[ 1.344514] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 1.422616] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 1.422627] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.568053] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.568063] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.576364] ata1.00: ATA-8: STM3500418AS, CC37, max UDMA/133
[ 1.576367] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.592383] ata1.00: configured for UDMA/133
[ 1.592483] scsi 0:0:0:0: Direct-Access ATA STM3500418AS CC37 PQ: 0 ANSI: 5
[ 1.592589] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.592613] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.592643] sd 0:0:0:0: [sda] Write Protect is off
[ 1.592644] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.592659] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.592736] sda:
[ 1.593620] scsi 4:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182D SB04 PQ: 0 ANSI: 5
[ 1.600184] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.600187] Uniform CD-ROM driver Revision: 3.20
[ 1.600253] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.600290] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 1.600360] scsi 4:0:1:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5
[ 1.600422] sd 4:0:1:0: [sdb] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
[ 1.600430] sd 4:0:1:0: Attached scsi generic sg2 type 0
[ 1.600451] sd 4:0:1:0: [sdb] Write Protect is off
[ 1.600453] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.600467] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.600540] sdb: sda1 sda2 sda3
[ 1.647160] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.736009] usb 2-5: new high speed USB device using ehci_hcd and address 2
[ 1.767073] Freeing unused kernel memory: 544k freed
[ 1.767271] Write protecting the kernel text: 4592k
[ 1.767320] Write protecting the kernel read-only data: 1836k
[ 1.836926] Linux agpgart interface v0.103
[ 1.870853] Initializing USB Mass Storage driver...
[ 1.871199] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.888917] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.888928] ATL1E 0000:02:00.0: setting latency timer to 64
[ 1.889319] usbcore: registered new interface driver usb-storage
[ 1.889322] USB Mass Storage support registered.
[ 1.889385] usb-storage: device found at 3
[ 1.889387] usb-storage: waiting for device to settle before scanning
[ 1.892492] ohci1394 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.895618] Floppy drive(s): fd0 is 1.44M
[ 1.916193] usb 2-5: configuration #1 chosen from 1 choice
[ 1.916498] FDC 0 is a post-1991 82077
[ 1.916897] scsi7 : SCSI emulation for USB Mass Storage devices
[ 1.916972] usb-storage: device found at 2
[ 1.916973] usb-storage: waiting for device to settle before scanning
[ 1.950020] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[febff000-febff7ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 2.384027] usb 8-2: new full speed USB device using uhci_hcd and address 2
[ 2.576963] usb 8-2: configuration #1 chosen from 1 choice
[ 2.948598] PM: Starting manual resume from disk
[ 2.948601] PM: Resume from partition 8:6
[ 2.948602] PM: Checking hibernation image.
[ 2.948799] PM: Resume from disk failed.
[ 2.967411] EXT4-fs (sda5): barriers enabled
[ 2.975650] kjournald2 starting: pid 439, dev sda5:8, commit interval 5 seconds
[ 2.975659] EXT4-fs (sda5): delayed allocation enabled
[ 2.975662] EXT4-fs: file extents enabled
[ 2.976580] EXT4-fs: mballoc enabled
[ 2.976588] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 3.228592] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0001c40608]
[ 3.389260] type=1505 audit(1259359203.082:2): operation="profile_load" pid=462 name=/usr/share/gdm/guest-session/Xsession
[ 3.391353] type=1505 audit(1259359203.082:3): operation="profile_load" pid=463 name=/sbin/dhclient3
[ 3.391863] type=1505 audit(1259359203.082:4): operation="profile_load" pid=463 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 3.392130] type=1505 audit(1259359203.086:5): operation="profile_load" pid=463 name=/usr/lib/connman/scripts/dhclient-script
[ 3.438957] type=1505 audit(1259359203.130:6): operation="profile_load" pid=464 name=/usr/bin/evince
[ 3.446668] type=1505 audit(1259359203.139:7): operation="profile_load" pid=464 name=/usr/bin/evince-previewer
[ 3.451220] type=1505 audit(1259359203.143:8): operation="profile_load" pid=464 name=/usr/bin/evince-thumbnailer
[ 3.467493] type=1505 audit(1259359203.159:9): operation="profile_load" pid=466 name=/usr/lib/cups/backend/cups-pdf
[ 3.468077] type=1505 audit(1259359203.159:10): operation="profile_load" pid=466 name=/usr/sbin/cupsd
[ 3.987399] Adding 923696k swap on /dev/sda6. Priority:-1 extents:1 across:923696k
[ 4.193876] EXT4-fs (sda5): internal journal on sda5:8
[ 4.610202] udev: starting version 147
[ 5.742786] nvidia: module license 'NVIDIA' taints kernel.
[ 5.742790] Disabling lock debugging due to kernel taint
[ 5.993888] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.993895] nvidia 0000:01:00.0: setting latency timer to 64
[ 5.993970] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.20 Thu Jun 25 19:23:24 PDT 2009
[ 6.103485] Linux video capture interface: v2.00
[ 6.366210] psmouse serio1: ID: 10 00 64
[ 6.485069] lp: driver loaded but no devices found
[ 6.776188] gspca: main v2.6.0 registered
[ 6.777365] gspca: probing 041e:4064
[ 6.810457] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.888064] usb-storage: device scan complete
[ 6.888568] scsi 6:0:0:0: Direct-Access Generic USB CF Reader 0.00 PQ: 0 ANSI: 2
[ 6.889063] scsi 6:0:0:1: Direct-Access Generic USB SD Reader 0.00 PQ: 0 ANSI: 2
[ 6.889563] scsi 6:0:0:2: Direct-Access Generic USB MS Reader 0.00 PQ: 0 ANSI: 2
[ 6.889937] scsi 6:0:0:3: Direct-Access Generic USB SM Reader 0.00 PQ: 0 ANSI: 2
[ 6.890233] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 6.890293] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 6.890352] sd 6:0:0:2: Attached scsi generic sg5 type 0
[ 6.890416] sd 6:0:0:3: Attached scsi generic sg6 type 0
[ 6.899321] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[ 6.899326] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 6.900125] sd 6:0:0:2: [sde] Attached SCSI removable disk
[ 6.916306] usb-storage: device scan complete
[ 6.922523] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 6.934842] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 6.951514] scsi 7:0:0:0: Direct-Access Maxtor 3200 0344 PQ: 0 ANSI: 4
[ 6.951802] sd 7:0:0:0: Attached scsi generic sg7 type 0
[ 6.952872] sd 7:0:0:0: [sdg] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 6.953741] sd 7:0:0:0: [sdg] Write Protect is off
[ 6.953745] sd 7:0:0:0: [sdg] Mode Sense: 17 00 00 00
[ 6.953747] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[ 6.955490] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[ 6.955493] sdg: sdg1
[ 6.963814] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[ 6.963817] sd 7:0:0:0: [sdg] Attached SCSI disk
[ 6.964796] ov519: I2C synced in 0 attempt(s)
[ 6.964799] ov519: starting OV7xx0 configuration
[ 6.976795] ov519: Sensor is an OV7670
[ 7.317405] __ratelimit: 3 callbacks suppressed
[ 7.317408] type=1505 audit(1259355607.010:12): operation="profile_replace" pid=892 name=/usr/share/gdm/guest-session/Xsession
[ 7.319693] type=1505 audit(1259355607.010:13): operation="profile_replace" pid=894 name=/sbin/dhclient3
[ 7.320174] type=1505 audit(1259355607.014:14): operation="profile_replace" pid=894 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 7.320436] type=1505 audit(1259355607.014:15): operation="profile_replace" pid=894 name=/usr/lib/connman/scripts/dhclient-script
[ 7.323381] type=1505 audit(1259355607.014:16): operation="profile_replace" pid=895 name=/usr/bin/evince
[ 7.331171] type=1505 audit(1259355607.022:17): operation="profile_replace" pid=895 name=/usr/bin/evince-previewer
[ 7.335813] type=1505 audit(1259355607.026:18): operation="profile_replace" pid=895 name=/usr/bin/evince-thumbnailer
[ 7.342826] type=1505 audit(1259355607.034:19): operation="profile_replace" pid=898 name=/usr/lib/cups/backend/cups-pdf
[ 7.343387] type=1505 audit(1259355607.034:20): operation="profile_replace" pid=898 name=/usr/sbin/cupsd
[ 7.344936] type=1505 audit(1259355607.038:21): operation="profile_replace" pid=899 name=/usr/sbin/tcpdump
[ 7.472587] alloc irq_desc for 22 on node -1
[ 7.472589] alloc kstat_irqs on node -1
[ 7.472594] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.472618] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.955388] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 8.348811] gspca: probe ok
[ 8.348823] gspca: probing 041e:4064
[ 8.348832] gspca: probing 041e:4064
[ 8.348849] usbcore: registered new interface driver ov519
[ 8.348852] ov519: registered
[ 8.805982] usbcore: registered new interface driver snd-usb-audio
[ 10.322052] alloc irq_desc for 28 on node -1
[ 10.322055] alloc kstat_irqs on node -1
[ 10.322067] ATL1E 0000:02:00.0: irq 28 for MSI/MSI-X
[ 10.322183] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up
[ 10.322304] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.322425] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.104782] ppdev: user-space parallel port driver
[ 20.712505] eth0: no IPv6 routers present
[ 21.979617] CPU0 attaching NULL sched-domain.
[ 21.979621] CPU1 attaching NULL sched-domain.
[ 21.988561] CPU0 attaching sched-domain:
[ 21.988565] domain 0: span 0-1 level MC
[ 21.988567] groups: 0 1
[ 21.988571] domain 1: span 0-1 level CPU
[ 21.988574] groups: 0-1 (__cpu_power = 2048)
[ 21.988579] CPU1 attaching sched-domain:
[ 21.988581] domain 0: span 0-1 level MC
[ 21.988583] groups: 1 0
[ 21.988587] domain 1: span 0-1 level CPU
[ 21.988589] groups: 0-1 (__cpu_power = 2048)
[ 23.277499] CPU0 attaching NULL sched-domain.
[ 23.277503] CPU1 attaching NULL sched-domain.
[ 23.292053] CPU0 attaching sched-domain:
[ 23.292057] domain 0: span 0-1 level MC
[ 23.292059] groups: 0 1
[ 23.292064] CPU1 attaching sched-domain:
[ 23.292066] domain 0: span 0-1 level MC
[ 23.292068] groups: 1 0
[ 638.986890] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 3247.288014] usb 7-1: new full speed USB device using uhci_hcd and address 2
[ 3251.716041] hub 7-0:1.0: unable to enumerate USB device on port 1
[ 3252.232013] usb 7-1: new full speed USB device using uhci_hcd and address 3
[ 3252.413964] usb 7-1: configuration #1 chosen from 1 choice
[ 3252.448923] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3413
[ 3252.448938] usbcore: registered new interface driver usblp
[ 3253.647352] usb 7-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 3910.717431] cdrom: sr0: mrw address space DMA selected
[ 3910.786826] cdrom: sr0: mrw address space DMA selected
[ 3910.953632] UDF-fs: No VRS found
[ 3910.953636] UDF-fs: No partition found (1)
[ 3911.020757] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 3911.021322] ISOFS: changing to secondary root
[ 4246.428583] VFS: busy inodes on changed media or resized disk sr0
[ 4246.555601] VFS: busy inodes on changed media or resized disk sr0
[ 4246.810042] VFS: busy inodes on changed media or resized disk sr0
[ 4246.937258] VFS: busy inodes on changed media or resized disk sr0
[ 4247.191697] VFS: busy inodes on changed media or resized disk sr0
[ 4247.318913] VFS: busy inodes on changed media or resized disk sr0
[ 4247.488537] VFS: busy inodes on changed media or resized disk sr0
[ 4247.636961] VFS: busy inodes on changed media or resized disk sr0
[ 4247.764183] VFS: busy inodes on changed media or resized disk sr0
[ 4247.933803] VFS: busy inodes on changed media or resized disk sr0
[ 4248.188267] VFS: busy inodes on changed media or resized disk sr0
[ 4248.315472] VFS: busy inodes on changed media or resized disk sr0
[ 4248.485090] VFS: busy inodes on changed media or resized disk sr0
[ 4248.612308] VFS: busy inodes on changed media or resized disk sr0
[ 4248.866748] VFS: busy inodes on changed media or resized disk sr0
[ 4250.309184] VFS: busy inodes on changed media or resized disk sr0
[ 4250.311501] VFS: busy inodes on changed media or resized disk sr0
[ 4250.326206] VFS: busy inodes on changed media or resized disk sr0
[ 4252.309827] VFS: busy inodes on changed media or resized disk sr0
[ 4252.312141] VFS: busy inodes on changed media or resized disk sr0
[ 4252.330724] VFS: busy inodes on changed media or resized disk sr0
[ 4254.309708] VFS: busy inodes on changed media or resized disk sr0
[ 4254.312036] VFS: busy inodes on changed media or resized disk sr0
[ 4254.327645] VFS: busy inodes on changed media or resized disk sr0
[ 4256.309923] VFS: busy inodes on changed media or resized disk sr0
[ 4256.312235] VFS: busy inodes on changed media or resized disk sr0
[ 4256.327424] VFS: busy inodes on changed media or resized disk sr0
[ 4258.429347] VFS: busy inodes on changed media or resized disk sr0
[ 4258.556561] VFS: busy inodes on changed media or resized disk sr0
[ 4258.683779] VFS: busy inodes on changed media or resized disk sr0
[ 4260.422416] VFS: busy inodes on changed media or resized disk sr0
[ 4260.549641] VFS: busy inodes on changed media or resized disk sr0
[ 4260.804067] VFS: busy inodes on changed media or resized disk sr0
[ 4262.415508] VFS: busy inodes on changed media or resized disk sr0
[ 4262.542722] VFS: busy inodes on changed media or resized disk sr0
[ 4262.808044] VFS: busy inodes on changed media or resized disk sr0
[ 4264.429802] VFS: busy inodes on changed media or resized disk sr0
[ 4264.557019] VFS: busy inodes on changed media or resized disk sr0
[ 4264.811457] VFS: busy inodes on changed media or resized disk sr0
[ 4266.432534] VFS: busy inodes on changed media or resized disk sr0
[ 4266.559749] VFS: busy inodes on changed media or resized disk sr0
[ 4266.814190] VFS: busy inodes on changed media or resized disk sr0
[ 4268.314248] VFS: busy inodes on changed media or resized disk sr0
[ 4270.022018] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.022023] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.022028] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.022033] end_request: I/O error, dev sr0, sector 2674816
[ 4270.022037] Buffer I/O error on device sr0, logical block 668704
[ 4270.022040] Buffer I/O error on device sr0, logical block 668705
[ 4270.025342] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.025346] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.025350] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.025356] end_request: I/O error, dev sr0, sector 2674816
[ 4270.025359] Buffer I/O error on device sr0, logical block 668704
[ 4270.025361] Buffer I/O error on device sr0, logical block 668705
[ 4270.028141] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.028144] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.028148] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.028153] end_request: I/O error, dev sr0, sector 2674928
[ 4270.028156] Buffer I/O error on device sr0, logical block 668732
[ 4270.028159] Buffer I/O error on device sr0, logical block 668733
[ 4270.029961] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.029965] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.029969] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.029974] end_request: I/O error, dev sr0, sector 2674928
[ 4270.029976] Buffer I/O error on device sr0, logical block 668732
[ 4270.029979] Buffer I/O error on device sr0, logical block 668733
[ 4270.048587] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.048591] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.048595] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.048600] end_request: I/O error, dev sr0, sector 2674936
[ 4270.048603] Buffer I/O error on device sr0, logical block 668734
[ 4270.048606] Buffer I/O error on device sr0, logical block 668735
[ 4270.050078] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.050081] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.050085] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.050090] end_request: I/O error, dev sr0, sector 2674936
[ 4270.053003] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.053007] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.053012] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.053017] end_request: I/O error, dev sr0, sector 2674936
[ 4270.061083] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.061087] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.061091] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.061097] end_request: I/O error, dev sr0, sector 2674936
[ 4270.062150] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.062154] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.062158] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.062163] end_request: I/O error, dev sr0, sector 2674936
[ 4270.063143] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.063146] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.063150] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.063155] end_request: I/O error, dev sr0, sector 2674936
[ 4270.064178] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.064181] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.064185] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.064190] end_request: I/O error, dev sr0, sector 2674936
[ 4270.077693] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.077697] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.077699] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.077703] end_request: I/O error, dev sr0, sector 2674880
[ 4270.078872] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.078874] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.078877] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.078880] end_request: I/O error, dev sr0, sector 2674928
[ 4270.152989] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4270.153007] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4270.155120] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.155124] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.155129] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.155135] end_request: I/O error, dev sr0, sector 2674936
[ 4270.157089] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.157093] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.157097] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.157102] end_request: I/O error, dev sr0, sector 2674936
[ 4271.901921] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4271.917638] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4282.601393] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4284.842250] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4293.410624] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4297.176864] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4303.038340] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4307.651874] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4369.282307] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4376.341617] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4393.225920] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4393.225946] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4561.188677] usb 7-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 4776.896531] usb 7-1: USB disconnect, address 3
[ 4776.896690] usblp0: removed
[ 4778.152403] usb 1-2: USB disconnect, address 2
[ 4778.424017] usb 1-2: new high speed USB device using ehci_hcd and address 4
[ 4778.557348] usb 1-2: configuration #1 chosen from 1 choice
[ 4778.558563] hub 1-2:1.0: USB hub found
[ 4778.559831] hub 1-2:1.0: 4 ports detected
[ 4779.040013] usb 7-1: new full speed USB device using uhci_hcd and address 4
[ 4783.420039] hub 7-0:1.0: unable to enumerate USB device on port 1
[ 4784.080018] usb 7-1: new full speed USB device using uhci_hcd and address 5
[ 4784.261155] usb 7-1: configuration #1 chosen from 1 choice
[ 4784.271112] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3413
[ 4785.535999] usb 7-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 4902.608908] usb 7-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 5500.560041] usb 7-1: USB disconnect, address 5
[ 5500.560230] usblp0: removed
[ 5505.272036] usb 8-2: USB disconnect, address 2
[ 5505.272193] gspca: disconnect complete
[ 5516.912015] usb 7-1: new full speed USB device using uhci_hcd and address 6
[ 5517.098104] usb 7-1: configuration #1 chosen from 1 choice
[ 5517.107077] usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3413
[ 5518.398297] usb 7-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 5544.712117] usb 7-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 5735.816620] usb 7-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 9168.232030] usb 7-1: USB disconnect, address 6
[ 9168.232187] usblp0: removed
[62469.780014] usb 6-2: new full speed USB device using uhci_hcd and address 2
[62469.977104] usb 6-2: configuration #1 chosen from 1 choice
[62469.980156] gspca: probing 041e:4064
[62470.169010] ov519: I2C synced in 0 attempt(s)
[62470.169012] ov519: starting OV7xx0 configuration
[62470.181009] ov519: Sensor is an OV7670
[62471.529028] gspca: probe ok
[62471.529082] gspca: probing 041e:4064
[63286.296034] usb 6-2: USB disconnect, address 2
[63286.296159] gspca: disconnect complete
[63435.052210] usb 6-2: new full speed USB device using uhci_hcd and address 3
[63435.244607] usb 6-2: configuration #1 chosen from 1 choice
[63435.247565] gspca: probing 041e:4064
[63435.437510] ov519: I2C synced in 0 attempt(s)
[63435.437513] ov519: starting OV7xx0 configuration
[63435.449508] ov519: Sensor is an OV7670
[63436.828531] gspca: probe ok
[63436.828586] gspca: probing 041e:4064
Uso ubuntu 9.10.
Bus 002 Device 002: ID 0d49:3200 Maxtor
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 003: ID 041e:4064 Creative Technology, Ltd
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 003: ID 1307:0330 Transcend Information, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
lsmod:
Module Size Used by
isofs 31620 0
udf 80900 0
crc_itu_t 1852 1 udf
usblp 12636 0
binfmt_misc 8356 1
ppdev 6688 0
snd_usb_audio 84320 1
snd_usb_lib 16316 1 snd_usb_audio
snd_hda_codec_realtek 203328 1
snd_hda_intel 26984 4
snd_hda_codec 75708 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 7200 2 snd_usb_audio,snd_hda_codec
snd_pcm_oss 37920 0
snd_mixer_oss 16028 1 snd_pcm_oss
snd_pcm 75488 5 snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 2656 0
snd_seq_oss 28576 0
snd_seq_midi 6432 0
snd_rawmidi 22208 2 snd_usb_lib,snd_seq_midi
snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi
snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
iptable_filter 3100 0
snd_timer 22276 2 snd_pcm,snd_seq
ip_tables 11692 1 iptable_filter
snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
gspca_ov519 25440 0
gspca_main 22844 1 gspca_ov519
snd 59204 22 snd_usb_audio,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
lp 8964 0
x_tables 16544 1 ip_tables
psmouse 56500 0
videodev 36736 1 gspca_main
soundcore 7264 1 snd
parport 35340 2 ppdev,lp
v4l1_compat 14496 1 videodev
snd_page_alloc 9252 2 snd_hda_intel,snd_pcm
serio_raw 5280 0
asus_atk0110 8252 0
nvidia 7090664 34
floppy 54980 0
ohci1394 30220 0
atl1e 31888 0
ieee1394 86628 1 ohci1394
usb_storage 52608 1
intel_agp 27748 0
agpgart 35020 2 nvidia,intel_agp
dmesg
[ 0.800148] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.800170] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.800183] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.800187] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.800189] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.800207] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.800226] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 0.800279] usb usb3: configuration #1 chosen from 1 choice
[ 0.800296] hub 3-0:1.0: USB hub found
[ 0.800300] hub 3-0:1.0: 2 ports detected
[ 0.800333] alloc irq_desc for 21 on node -1
[ 0.800334] alloc kstat_irqs on node -1
[ 0.800337] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.800341] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.800343] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.800364] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.800387] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.800434] usb usb4: configuration #1 chosen from 1 choice
[ 0.800451] hub 4-0:1.0: USB hub found
[ 0.800455] hub 4-0:1.0: 2 ports detected
[ 0.800483] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.800487] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.800489] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.800509] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.800527] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 0.800574] usb usb5: configuration #1 chosen from 1 choice
[ 0.800590] hub 5-0:1.0: USB hub found
[ 0.800594] hub 5-0:1.0: 2 ports detected
[ 0.800625] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.800629] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.800631] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.800649] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.800666] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 0.800716] usb usb6: configuration #1 chosen from 1 choice
[ 0.800733] hub 6-0:1.0: USB hub found
[ 0.800736] hub 6-0:1.0: 2 ports detected
[ 0.800767] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.800771] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.800773] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.800791] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.800809] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.800859] usb usb7: configuration #1 chosen from 1 choice
[ 0.800875] hub 7-0:1.0: USB hub found
[ 0.800879] hub 7-0:1.0: 2 ports detected
[ 0.800909] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.800913] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.800916] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.800937] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.800955] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 0.801004] usb usb8: configuration #1 chosen from 1 choice
[ 0.801022] hub 8-0:1.0: USB hub found
[ 0.801026] hub 8-0:1.0: 2 ports detected
[ 0.801092] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.803300] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.803304] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.803341] mice: PS/2 mouse device common for all mice
[ 0.803407] rtc_cmos 00:03: RTC can wake from S4
[ 0.803428] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.803447] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.803511] device-mapper: uevent: version 1.0.3
[ 0.803560] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.803603] device-mapper: multipath: version 1.1.0 loaded
[ 0.803604] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.803675] EISA: Probing bus 0 at eisa.0
[ 0.803697] EISA: Detected 0 cards.
[ 0.803747] cpuidle: using governor ladder
[ 0.803749] cpuidle: using governor menu
[ 0.804060] TCP cubic registered
[ 0.804161] NET: Registered protocol family 10
[ 0.804462] lo: Disabled Privacy Extensions
[ 0.804679] NET: Registered protocol family 17
[ 0.804690] Bluetooth: L2CAP ver 2.13
[ 0.804691] Bluetooth: L2CAP socket layer initialized
[ 0.804693] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.804694] Bluetooth: SCO socket layer initialized
[ 0.804711] Bluetooth: RFCOMM TTY layer initialized
[ 0.804712] Bluetooth: RFCOMM socket layer initialized
[ 0.804714] Bluetooth: RFCOMM ver 1.11
[ 0.805065] Using IPI No-Shortcut mode
[ 0.805102] PM: Resume from disk failed.
[ 0.805109] registered taskstats version 1
[ 0.805189] Magic number: 1:731:1006
[ 0.805199] system 00:08: hash matches
[ 0.805230] rtc_cmos 00:03: setting system clock to 2009-11-27 22:00:00 UTC (1259359200)
[ 0.805232] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.805234] EDD information not available.
[ 0.822412] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.940356] ata5.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB04, max UDMA/33
[ 0.940544] ata5.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[ 0.940547] ata5.01: 160086528 sectors, multi 0: LBA
[ 0.956368] ata5.00: configured for UDMA/33
[ 0.972556] ata5.01: configured for UDMA/100
[ 1.090527] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.101030] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.101050] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 1.233256] usb 1-2: configuration #1 chosen from 1 choice
[ 1.233493] hub 1-2:1.0: USB hub found
[ 1.233838] hub 1-2:1.0: 4 ports detected
[ 1.344514] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 1.422616] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 1.422627] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.568053] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.568063] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.576364] ata1.00: ATA-8: STM3500418AS, CC37, max UDMA/133
[ 1.576367] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.592383] ata1.00: configured for UDMA/133
[ 1.592483] scsi 0:0:0:0: Direct-Access ATA STM3500418AS CC37 PQ: 0 ANSI: 5
[ 1.592589] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.592613] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.592643] sd 0:0:0:0: [sda] Write Protect is off
[ 1.592644] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.592659] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.592736] sda:
[ 1.593620] scsi 4:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182D SB04 PQ: 0 ANSI: 5
[ 1.600184] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.600187] Uniform CD-ROM driver Revision: 3.20
[ 1.600253] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.600290] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 1.600360] scsi 4:0:1:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5
[ 1.600422] sd 4:0:1:0: [sdb] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
[ 1.600430] sd 4:0:1:0: Attached scsi generic sg2 type 0
[ 1.600451] sd 4:0:1:0: [sdb] Write Protect is off
[ 1.600453] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.600467] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.600540] sdb: sda1 sda2 sda3
[ 1.647160] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.736009] usb 2-5: new high speed USB device using ehci_hcd and address 2
[ 1.767073] Freeing unused kernel memory: 544k freed
[ 1.767271] Write protecting the kernel text: 4592k
[ 1.767320] Write protecting the kernel read-only data: 1836k
[ 1.836926] Linux agpgart interface v0.103
[ 1.870853] Initializing USB Mass Storage driver...
[ 1.871199] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.888917] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.888928] ATL1E 0000:02:00.0: setting latency timer to 64
[ 1.889319] usbcore: registered new interface driver usb-storage
[ 1.889322] USB Mass Storage support registered.
[ 1.889385] usb-storage: device found at 3
[ 1.889387] usb-storage: waiting for device to settle before scanning
[ 1.892492] ohci1394 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.895618] Floppy drive(s): fd0 is 1.44M
[ 1.916193] usb 2-5: configuration #1 chosen from 1 choice
[ 1.916498] FDC 0 is a post-1991 82077
[ 1.916897] scsi7 : SCSI emulation for USB Mass Storage devices
[ 1.916972] usb-storage: device found at 2
[ 1.916973] usb-storage: waiting for device to settle before scanning
[ 1.950020] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[febff000-febff7ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 2.384027] usb 8-2: new full speed USB device using uhci_hcd and address 2
[ 2.576963] usb 8-2: configuration #1 chosen from 1 choice
[ 2.948598] PM: Starting manual resume from disk
[ 2.948601] PM: Resume from partition 8:6
[ 2.948602] PM: Checking hibernation image.
[ 2.948799] PM: Resume from disk failed.
[ 2.967411] EXT4-fs (sda5): barriers enabled
[ 2.975650] kjournald2 starting: pid 439, dev sda5:8, commit interval 5 seconds
[ 2.975659] EXT4-fs (sda5): delayed allocation enabled
[ 2.975662] EXT4-fs: file extents enabled
[ 2.976580] EXT4-fs: mballoc enabled
[ 2.976588] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 3.228592] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0001c40608]
[ 3.389260] type=1505 audit(1259359203.082:2): operation="profile_load" pid=462 name=/usr/share/gdm/guest-session/Xsession
[ 3.391353] type=1505 audit(1259359203.082:3): operation="profile_load" pid=463 name=/sbin/dhclient3
[ 3.391863] type=1505 audit(1259359203.082:4): operation="profile_load" pid=463 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 3.392130] type=1505 audit(1259359203.086:5): operation="profile_load" pid=463 name=/usr/lib/connman/scripts/dhclient-script
[ 3.438957] type=1505 audit(1259359203.130:6): operation="profile_load" pid=464 name=/usr/bin/evince
[ 3.446668] type=1505 audit(1259359203.139:7): operation="profile_load" pid=464 name=/usr/bin/evince-previewer
[ 3.451220] type=1505 audit(1259359203.143:8): operation="profile_load" pid=464 name=/usr/bin/evince-thumbnailer
[ 3.467493] type=1505 audit(1259359203.159:9): operation="profile_load" pid=466 name=/usr/lib/cups/backend/cups-pdf
[ 3.468077] type=1505 audit(1259359203.159:10): operation="profile_load" pid=466 name=/usr/sbin/cupsd
[ 3.987399] Adding 923696k swap on /dev/sda6. Priority:-1 extents:1 across:923696k
[ 4.193876] EXT4-fs (sda5): internal journal on sda5:8
[ 4.610202] udev: starting version 147
[ 5.742786] nvidia: module license 'NVIDIA' taints kernel.
[ 5.742790] Disabling lock debugging due to kernel taint
[ 5.993888] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.993895] nvidia 0000:01:00.0: setting latency timer to 64
[ 5.993970] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.20 Thu Jun 25 19:23:24 PDT 2009
[ 6.103485] Linux video capture interface: v2.00
[ 6.366210] psmouse serio1: ID: 10 00 64
[ 6.485069] lp: driver loaded but no devices found
[ 6.776188] gspca: main v2.6.0 registered
[ 6.777365] gspca: probing 041e:4064
[ 6.810457] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.888064] usb-storage: device scan complete
[ 6.888568] scsi 6:0:0:0: Direct-Access Generic USB CF Reader 0.00 PQ: 0 ANSI: 2
[ 6.889063] scsi 6:0:0:1: Direct-Access Generic USB SD Reader 0.00 PQ: 0 ANSI: 2
[ 6.889563] scsi 6:0:0:2: Direct-Access Generic USB MS Reader 0.00 PQ: 0 ANSI: 2
[ 6.889937] scsi 6:0:0:3: Direct-Access Generic USB SM Reader 0.00 PQ: 0 ANSI: 2
[ 6.890233] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 6.890293] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 6.890352] sd 6:0:0:2: Attached scsi generic sg5 type 0
[ 6.890416] sd 6:0:0:3: Attached scsi generic sg6 type 0
[ 6.899321] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[ 6.899326] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 6.900125] sd 6:0:0:2: [sde] Attached SCSI removable disk
[ 6.916306] usb-storage: device scan complete
[ 6.922523] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 6.934842] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 6.951514] scsi 7:0:0:0: Direct-Access Maxtor 3200 0344 PQ: 0 ANSI: 4
[ 6.951802] sd 7:0:0:0: Attached scsi generic sg7 type 0
[ 6.952872] sd 7:0:0:0: [sdg] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 6.953741] sd 7:0:0:0: [sdg] Write Protect is off
[ 6.953745] sd 7:0:0:0: [sdg] Mode Sense: 17 00 00 00
[ 6.953747] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[ 6.955490] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[ 6.955493] sdg: sdg1
[ 6.963814] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[ 6.963817] sd 7:0:0:0: [sdg] Attached SCSI disk
[ 6.964796] ov519: I2C synced in 0 attempt(s)
[ 6.964799] ov519: starting OV7xx0 configuration
[ 6.976795] ov519: Sensor is an OV7670
[ 7.317405] __ratelimit: 3 callbacks suppressed
[ 7.317408] type=1505 audit(1259355607.010:12): operation="profile_replace" pid=892 name=/usr/share/gdm/guest-session/Xsession
[ 7.319693] type=1505 audit(1259355607.010:13): operation="profile_replace" pid=894 name=/sbin/dhclient3
[ 7.320174] type=1505 audit(1259355607.014:14): operation="profile_replace" pid=894 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 7.320436] type=1505 audit(1259355607.014:15): operation="profile_replace" pid=894 name=/usr/lib/connman/scripts/dhclient-script
[ 7.323381] type=1505 audit(1259355607.014:16): operation="profile_replace" pid=895 name=/usr/bin/evince
[ 7.331171] type=1505 audit(1259355607.022:17): operation="profile_replace" pid=895 name=/usr/bin/evince-previewer
[ 7.335813] type=1505 audit(1259355607.026:18): operation="profile_replace" pid=895 name=/usr/bin/evince-thumbnailer
[ 7.342826] type=1505 audit(1259355607.034:19): operation="profile_replace" pid=898 name=/usr/lib/cups/backend/cups-pdf
[ 7.343387] type=1505 audit(1259355607.034:20): operation="profile_replace" pid=898 name=/usr/sbin/cupsd
[ 7.344936] type=1505 audit(1259355607.038:21): operation="profile_replace" pid=899 name=/usr/sbin/tcpdump
[ 7.472587] alloc irq_desc for 22 on node -1
[ 7.472589] alloc kstat_irqs on node -1
[ 7.472594] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.472618] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.955388] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 8.348811] gspca: probe ok
[ 8.348823] gspca: probing 041e:4064
[ 8.348832] gspca: probing 041e:4064
[ 8.348849] usbcore: registered new interface driver ov519
[ 8.348852] ov519: registered
[ 8.805982] usbcore: registered new interface driver snd-usb-audio
[ 10.322052] alloc irq_desc for 28 on node -1
[ 10.322055] alloc kstat_irqs on node -1
[ 10.322067] ATL1E 0000:02:00.0: irq 28 for MSI/MSI-X
[ 10.322183] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up
[ 10.322304] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.322425] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.104782] ppdev: user-space parallel port driver
[ 20.712505] eth0: no IPv6 routers present
[ 21.979617] CPU0 attaching NULL sched-domain.
[ 21.979621] CPU1 attaching NULL sched-domain.
[ 21.988561] CPU0 attaching sched-domain:
[ 21.988565] domain 0: span 0-1 level MC
[ 21.988567] groups: 0 1
[ 21.988571] domain 1: span 0-1 level CPU
[ 21.988574] groups: 0-1 (__cpu_power = 2048)
[ 21.988579] CPU1 attaching sched-domain:
[ 21.988581] domain 0: span 0-1 level MC
[ 21.988583] groups: 1 0
[ 21.988587] domain 1: span 0-1 level CPU
[ 21.988589] groups: 0-1 (__cpu_power = 2048)
[ 23.277499] CPU0 attaching NULL sched-domain.
[ 23.277503] CPU1 attaching NULL sched-domain.
[ 23.292053] CPU0 attaching sched-domain:
[ 23.292057] domain 0: span 0-1 level MC
[ 23.292059] groups: 0 1
[ 23.292064] CPU1 attaching sched-domain:
[ 23.292066] domain 0: span 0-1 level MC
[ 23.292068] groups: 1 0
[ 638.986890] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 3247.288014] usb 7-1: new full speed USB device using uhci_hcd and address 2
[ 3251.716041] hub 7-0:1.0: unable to enumerate USB device on port 1
[ 3252.232013] usb 7-1: new full speed USB device using uhci_hcd and address 3
[ 3252.413964] usb 7-1: configuration #1 chosen from 1 choice
[ 3252.448923] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3413
[ 3252.448938] usbcore: registered new interface driver usblp
[ 3253.647352] usb 7-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 3910.717431] cdrom: sr0: mrw address space DMA selected
[ 3910.786826] cdrom: sr0: mrw address space DMA selected
[ 3910.953632] UDF-fs: No VRS found
[ 3910.953636] UDF-fs: No partition found (1)
[ 3911.020757] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 3911.021322] ISOFS: changing to secondary root
[ 4246.428583] VFS: busy inodes on changed media or resized disk sr0
[ 4246.555601] VFS: busy inodes on changed media or resized disk sr0
[ 4246.810042] VFS: busy inodes on changed media or resized disk sr0
[ 4246.937258] VFS: busy inodes on changed media or resized disk sr0
[ 4247.191697] VFS: busy inodes on changed media or resized disk sr0
[ 4247.318913] VFS: busy inodes on changed media or resized disk sr0
[ 4247.488537] VFS: busy inodes on changed media or resized disk sr0
[ 4247.636961] VFS: busy inodes on changed media or resized disk sr0
[ 4247.764183] VFS: busy inodes on changed media or resized disk sr0
[ 4247.933803] VFS: busy inodes on changed media or resized disk sr0
[ 4248.188267] VFS: busy inodes on changed media or resized disk sr0
[ 4248.315472] VFS: busy inodes on changed media or resized disk sr0
[ 4248.485090] VFS: busy inodes on changed media or resized disk sr0
[ 4248.612308] VFS: busy inodes on changed media or resized disk sr0
[ 4248.866748] VFS: busy inodes on changed media or resized disk sr0
[ 4250.309184] VFS: busy inodes on changed media or resized disk sr0
[ 4250.311501] VFS: busy inodes on changed media or resized disk sr0
[ 4250.326206] VFS: busy inodes on changed media or resized disk sr0
[ 4252.309827] VFS: busy inodes on changed media or resized disk sr0
[ 4252.312141] VFS: busy inodes on changed media or resized disk sr0
[ 4252.330724] VFS: busy inodes on changed media or resized disk sr0
[ 4254.309708] VFS: busy inodes on changed media or resized disk sr0
[ 4254.312036] VFS: busy inodes on changed media or resized disk sr0
[ 4254.327645] VFS: busy inodes on changed media or resized disk sr0
[ 4256.309923] VFS: busy inodes on changed media or resized disk sr0
[ 4256.312235] VFS: busy inodes on changed media or resized disk sr0
[ 4256.327424] VFS: busy inodes on changed media or resized disk sr0
[ 4258.429347] VFS: busy inodes on changed media or resized disk sr0
[ 4258.556561] VFS: busy inodes on changed media or resized disk sr0
[ 4258.683779] VFS: busy inodes on changed media or resized disk sr0
[ 4260.422416] VFS: busy inodes on changed media or resized disk sr0
[ 4260.549641] VFS: busy inodes on changed media or resized disk sr0
[ 4260.804067] VFS: busy inodes on changed media or resized disk sr0
[ 4262.415508] VFS: busy inodes on changed media or resized disk sr0
[ 4262.542722] VFS: busy inodes on changed media or resized disk sr0
[ 4262.808044] VFS: busy inodes on changed media or resized disk sr0
[ 4264.429802] VFS: busy inodes on changed media or resized disk sr0
[ 4264.557019] VFS: busy inodes on changed media or resized disk sr0
[ 4264.811457] VFS: busy inodes on changed media or resized disk sr0
[ 4266.432534] VFS: busy inodes on changed media or resized disk sr0
[ 4266.559749] VFS: busy inodes on changed media or resized disk sr0
[ 4266.814190] VFS: busy inodes on changed media or resized disk sr0
[ 4268.314248] VFS: busy inodes on changed media or resized disk sr0
[ 4270.022018] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.022023] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.022028] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.022033] end_request: I/O error, dev sr0, sector 2674816
[ 4270.022037] Buffer I/O error on device sr0, logical block 668704
[ 4270.022040] Buffer I/O error on device sr0, logical block 668705
[ 4270.025342] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.025346] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.025350] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.025356] end_request: I/O error, dev sr0, sector 2674816
[ 4270.025359] Buffer I/O error on device sr0, logical block 668704
[ 4270.025361] Buffer I/O error on device sr0, logical block 668705
[ 4270.028141] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.028144] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.028148] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.028153] end_request: I/O error, dev sr0, sector 2674928
[ 4270.028156] Buffer I/O error on device sr0, logical block 668732
[ 4270.028159] Buffer I/O error on device sr0, logical block 668733
[ 4270.029961] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.029965] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.029969] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.029974] end_request: I/O error, dev sr0, sector 2674928
[ 4270.029976] Buffer I/O error on device sr0, logical block 668732
[ 4270.029979] Buffer I/O error on device sr0, logical block 668733
[ 4270.048587] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.048591] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.048595] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.048600] end_request: I/O error, dev sr0, sector 2674936
[ 4270.048603] Buffer I/O error on device sr0, logical block 668734
[ 4270.048606] Buffer I/O error on device sr0, logical block 668735
[ 4270.050078] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.050081] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.050085] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.050090] end_request: I/O error, dev sr0, sector 2674936
[ 4270.053003] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.053007] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.053012] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.053017] end_request: I/O error, dev sr0, sector 2674936
[ 4270.061083] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.061087] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.061091] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.061097] end_request: I/O error, dev sr0, sector 2674936
[ 4270.062150] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.062154] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.062158] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.062163] end_request: I/O error, dev sr0, sector 2674936
[ 4270.063143] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.063146] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.063150] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.063155] end_request: I/O error, dev sr0, sector 2674936
[ 4270.064178] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.064181] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.064185] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.064190] end_request: I/O error, dev sr0, sector 2674936
[ 4270.077693] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.077697] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.077699] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.077703] end_request: I/O error, dev sr0, sector 2674880
[ 4270.078872] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.078874] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.078877] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.078880] end_request: I/O error, dev sr0, sector 2674928
[ 4270.152989] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4270.153007] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4270.155120] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.155124] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.155129] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.155135] end_request: I/O error, dev sr0, sector 2674936
[ 4270.157089] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4270.157093] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 4270.157097] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 4270.157102] end_request: I/O error, dev sr0, sector 2674936
[ 4271.901921] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4271.917638] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4282.601393] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4284.842250] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4293.410624] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4297.176864] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4303.038340] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4307.651874] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4369.282307] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4376.341617] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4393.225920] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4393.225946] iso9660: Corrupted directory entry in block 0 of inode 27584
[ 4561.188677] usb 7-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 4776.896531] usb 7-1: USB disconnect, address 3
[ 4776.896690] usblp0: removed
[ 4778.152403] usb 1-2: USB disconnect, address 2
[ 4778.424017] usb 1-2: new high speed USB device using ehci_hcd and address 4
[ 4778.557348] usb 1-2: configuration #1 chosen from 1 choice
[ 4778.558563] hub 1-2:1.0: USB hub found
[ 4778.559831] hub 1-2:1.0: 4 ports detected
[ 4779.040013] usb 7-1: new full speed USB device using uhci_hcd and address 4
[ 4783.420039] hub 7-0:1.0: unable to enumerate USB device on port 1
[ 4784.080018] usb 7-1: new full speed USB device using uhci_hcd and address 5
[ 4784.261155] usb 7-1: configuration #1 chosen from 1 choice
[ 4784.271112] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3413
[ 4785.535999] usb 7-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 4902.608908] usb 7-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 5500.560041] usb 7-1: USB disconnect, address 5
[ 5500.560230] usblp0: removed
[ 5505.272036] usb 8-2: USB disconnect, address 2
[ 5505.272193] gspca: disconnect complete
[ 5516.912015] usb 7-1: new full speed USB device using uhci_hcd and address 6
[ 5517.098104] usb 7-1: configuration #1 chosen from 1 choice
[ 5517.107077] usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3413
[ 5518.398297] usb 7-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 5544.712117] usb 7-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 5735.816620] usb 7-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 9168.232030] usb 7-1: USB disconnect, address 6
[ 9168.232187] usblp0: removed
[62469.780014] usb 6-2: new full speed USB device using uhci_hcd and address 2
[62469.977104] usb 6-2: configuration #1 chosen from 1 choice
[62469.980156] gspca: probing 041e:4064
[62470.169010] ov519: I2C synced in 0 attempt(s)
[62470.169012] ov519: starting OV7xx0 configuration
[62470.181009] ov519: Sensor is an OV7670
[62471.529028] gspca: probe ok
[62471.529082] gspca: probing 041e:4064
[63286.296034] usb 6-2: USB disconnect, address 2
[63286.296159] gspca: disconnect complete
[63435.052210] usb 6-2: new full speed USB device using uhci_hcd and address 3
[63435.244607] usb 6-2: configuration #1 chosen from 1 choice
[63435.247565] gspca: probing 041e:4064
[63435.437510] ov519: I2C synced in 0 attempt(s)
[63435.437513] ov519: starting OV7xx0 configuration
[63435.449508] ov519: Sensor is an OV7670
[63436.828531] gspca: probe ok
[63436.828586] gspca: probing 041e:4064
Uso ubuntu 9.10.
Re: non riesco a far funzionare la mia webcam con skype
Ok allora la tua webcam non usa i moduli ov51x-jpeg ma i gspca.
Fai questa prova allora, da terminale
e vedi se adesso va, fammi sapere
Fai questa prova allora, da terminale
Codice: Seleziona tutto
LD_PRELOAD=/usr/lib32/libv4l/v4l1compat.so /usr/bin/cheeseRe: non riesco a far funzionare la mia webcam con skype
Con questo comando mi apre cheese che come ho dett6o prima funziona benissimo e mi esce scritto su terminale:
ERROR: ld.so: object '/usr/lib32/libv4l/v4l1compat.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib32/libv4l/v4l1compat.so' from LD_PRELOAD cannot be preloaded: ignored.
Re: non riesco a far funzionare la mia webcam con skype
Allora passa lo stesso comando a skye
se va poi ti dico come crearti una modifica definitiva
Codice: Seleziona tutto
LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so /usr/bin/skypeRe: non riesco a far funzionare la mia webcam con skype
Allora così se vado in opzioni/dispositivi video/ mi esce montata la mia web cam "VF0420 Live! Cam Vista IM (/dev/video0)" e se clicco su prova mi si accende la web cam e finalmente mi vedo ma se vado in dispositivi audio a microfono nn sta scritto la webcam ma "pulse audio server local" se faccio effettua una chiamata di prova non prende la mia voce.
Re: non riesco a far funzionare la mia webcam con skype
L'ultima versione di skype affida la gestione audio a pulse, potresti provare una cosa, da terminale
controlla se il microfono della webcam è riconosciuto e se non è attivo attivalo, devi impostare ache una delle voci "input Source" col microfono e il rispettivo "capture" attivo
Codice: Seleziona tutto
alsamixer v allRe: non riesco a far funzionare la mia webcam con skype
Guarda mi esce una specie di mixer ma non ho riconosciuto nessuna webcam creative tra quelle.
Come faccio ad attivare un dispositivo che non vedo?
Come faccio ad attivare un dispositivo che non vedo?
Re: non riesco a far funzionare la mia webcam con skype
Vai sull'icona con l'altoparlante sulla barra in alto a destra, click destro e scegli preferenze audio vai in ingresso e vedi se il microfono della webcam viene riconosciuto, nel caso lo fosse impostalo. Controlla anche la voce hardware per vedere se il microfono è riconosciuto (sempre in preferenze audio)
Re: non riesco a far funzionare la mia webcam con skype
Mitico!!
Ok ora facendo il comndo da terminale LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so /usr/bin/skype e mettendo la mia user e password funzia tutto.
Ma come decvo fare per evitare di aprire skype da terminale?
Dai ke ci siamo!
Ok ora facendo il comndo da terminale LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so /usr/bin/skype e mettendo la mia user e password funzia tutto.
Ma come decvo fare per evitare di aprire skype da terminale?
Dai ke ci siamo!
Re: non riesco a far funzionare la mia webcam con skype
Da terminale
Incollaci dentro questo
e salva. Poi sempre da terminale
infine click destro col mouse sul menù Applicazioni (nella barra in alto) e selezioni "Modifica menù", vai in Applicazioni>Internet>Skype>Proprietà e nella voce "comando" metti /usr/local/bin/skype, chiudi tutto per salvare e dovrebbe andare.
Fammi sapere
Codice: Seleziona tutto
sudo gedit /usr/local/bin/skypeCodice: Seleziona tutto
#!/bin/bash
LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so /usr/bin/skypeCodice: Seleziona tutto
sudo chmod a+x /usr/local/bin/skypeFammi sapere
Re: non riesco a far funzionare la mia webcam con skype
ciao
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 3 ospiti
