GRUB - Improvvisamente Non parte il conto alla rovescia

Problemi riscontrati durante l'installazione di Ubuntu, degli aggiornamenti e degli avanzamenti del sistema.
manuelina
Prode Principiante
Messaggi: 3
Iscrizione: lunedì 30 novembre 2009, 21:19

GRUB - Improvvisamente Non parte il conto alla rovescia

Messaggio da manuelina »

Salve a tutti, come da oggetto, da un giorno all'altro non mi è più partito il conto alla rovescia nel grub ed in pratica devo scegliere il sistema operativo da far partire dato che in automatico non parte nulla. io vorrei partisse la prima linea che sarebbe la versione ultima di ubuntu dopo 10 sec.

Ho provato a seguire le guide sul grub presenti sul forum e a leggere le discussioni degli altri utenti in merito, ma a parte uno strano caso in cui il count-down era rispuntato (non so come!!!) dal successivo riavvio in poi è sparito nuovamente. Ho anche installato start-up manager e settato le impostazioni, ma nulla da fare.

Posto di seguito i contenuti del file etc/default/grub modificato con privilegi di amministratore e seguito da update grub2 e update grub (nel dubbio li ho fatti entrambi...scusate:P)
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entrys
#GRUB_DISABLE_LINUX_RECOVERY="true"
e il contenuto del grub.cfg che a me sembra un pò incasinato..
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
  have_grubenv=true
  load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
  saved_entry=${prev_saved_entry}
  save_env saved_entry
  prev_saved_entry=
  save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set c74a1e43-b9f1-47bb-be98-d88c9f7c2c2b
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=640x480
  insmod gfxterm
  insmod vbe
  if terminal_output gfxterm ; then true ; else
    # For backward compatibility with versions of terminal.mod that don't
    # understand terminal_output
    terminal gfxterm
  fi
fi
if [ ${recordfail} = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-17-generic" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set c74a1e43-b9f1-47bb-be98-d88c9f7c2c2b
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=c74a1e43-b9f1-47bb-be98-d88c9f7c2c2b ro  quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode)" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set c74a1e43-b9f1-47bb-be98-d88c9f7c2c2b
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=c74a1e43-b9f1-47bb-be98-d88c9f7c2c2b ro single
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set c74a1e43-b9f1-47bb-be98-d88c9f7c2c2b
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c74a1e43-b9f1-47bb-be98-d88c9f7c2c2b ro  quiet splash
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode)" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set c74a1e43-b9f1-47bb-be98-d88c9f7c2c2b
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c74a1e43-b9f1-47bb-be98-d88c9f7c2c2b ro single
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set c74a1e43-b9f1-47bb-be98-d88c9f7c2c2b
linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c74a1e43-b9f1-47bb-be98-d88c9f7c2c2b ro  quiet splash
initrd /boot/initrd.img-2.6.31-15-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (recovery mode)" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set c74a1e43-b9f1-47bb-be98-d88c9f7c2c2b
linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c74a1e43-b9f1-47bb-be98-d88c9f7c2c2b ro single
initrd /boot/initrd.img-2.6.31-15-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set c74a1e43-b9f1-47bb-be98-d88c9f7c2c2b
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=c74a1e43-b9f1-47bb-be98-d88c9f7c2c2b ro  quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set c74a1e43-b9f1-47bb-be98-d88c9f7c2c2b
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=c74a1e43-b9f1-47bb-be98-d88c9f7c2c2b ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Home Edition (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
search --no-floppy --fs-uuid --set 8a0425c40425b3db
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
vedete voi se riuscite a svelare il mistero:)!
Grazie
Emanuela.
Avatar utente
Massimog
Rampante Reduce
Rampante Reduce
Messaggi: 7342
Iscrizione: martedì 2 dicembre 2008, 18:17
Desktop: GNOME 3.16
Distribuzione: Gentoo x86_64
Sesso: Maschile
Località: Osimo(AN)

Re: GRUB - Improvvisamente Non parte il conto alla rovescia

Messaggio da Massimog »

devi modificare il valore 10 cosi "10"

Codice: Seleziona tutto

# /boot/grub/grub.cfg.

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entrys
#GRUB_DISABLE_LINUX_RECOVERY="true"
Acer 5920G con Gentoo 64bit + Ubuntu 12.04 LTS Precise Pangolin 64bit + Windows 7 64 bit | Stampante Epson PX710W | Router Netgear DGN2000
manuelina
Prode Principiante
Messaggi: 3
Iscrizione: lunedì 30 novembre 2009, 21:19

Re: GRUB - Improvvisamente Non parte il conto alla rovescia

Messaggio da manuelina »

Mi dispiace ma continua a non cambiare niente...
dato che ho notato che grub.cfg si riferisce ad un file da cui dovrebbe prendere le impostazioni, posto anche il suo contenuto...non si sa mai possa essere d'aiuto.
Merci!

/etc/grub.d/00_header

Codice: Seleziona tutto

#! /bin/sh -e

# grub-mkconfig helper script.
# Copyright (C) 2006,2007,2008,2009  Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB.  If not, see <http://www.gnu.org/licenses/>.

transform="s,x,x,"

prefix=/usr
exec_prefix=${prefix}
libdir=${exec_prefix}/lib
grub_prefix=`echo /boot/grub | sed ${transform}`

. ${libdir}/grub/grub-mkconfig_lib

# Do this as early as possible, since other commands might depend on it.
# (e.g. the `loadfont' command might need lvm or raid modules)
for i in ${GRUB_PRELOAD_MODULES} ; do
  echo "insmod $i"
done

if [ "x${GRUB_DEFAULT}" = "x" ] ; then GRUB_DEFAULT=0 ; fi
if [ "x${GRUB_DEFAULT}" = "xsaved" ] ; then GRUB_DEFAULT='${saved_entry}' ; fi
if [ "x${GRUB_TIMEOUT}" = "x" ] ; then GRUB_TIMEOUT=10 ; fi
if [ "x${GRUB_GFXMODE}" = "x" ] ; then GRUB_GFXMODE=640x480 ; fi

cat << EOF
if [ -s /boot/grub/grubenv ]; then
  have_grubenv=true
  load_env
fi
set default="${GRUB_DEFAULT}"
if [ \${prev_saved_entry} ]; then
  saved_entry=\${prev_saved_entry}
  save_env saved_entry
  prev_saved_entry=
  save_env prev_saved_entry
fi
EOF

case ${GRUB_TERMINAL_INPUT}:${GRUB_TERMINAL_OUTPUT} in
  serial:* | *:serial)
    if ! test -e ${grub_prefix}/serial.mod ; then
      echo "Serial terminal not available on this platform." >&2 ; exit 1
    fi

    if [ "x${GRUB_SERIAL_COMMAND}" = "x" ] ; then
      grub_warn "Requested serial terminal but GRUB_SERIAL_COMMAND is unspecified. Default parameters will be used."
      GRUB_SERIAL_COMMAND=serial
    fi
    echo "${GRUB_SERIAL_COMMAND}"
  ;;
esac

case x${GRUB_TERMINAL_INPUT} in
  x)
    # Just use the native terminal
  ;;
  x*)
    cat << EOF
if terminal_input ${GRUB_TERMINAL_INPUT} ; then true ; else
  # For backward compatibility with versions of terminal.mod that don't
  # understand terminal_input
  terminal ${GRUB_TERMINAL_INPUT}
fi
EOF
  ;;
esac

case x${GRUB_TERMINAL_OUTPUT} in
 xgfxterm)
    # Make the font accessible
    prepare_grub_to_access_device `${grub_probe} --target=device ${GRUB_FONT_PATH}`

    cat << EOF
if loadfont `make_system_path_relative_to_its_root ${GRUB_FONT_PATH}` ; then
  set gfxmode=${GRUB_GFXMODE}
  insmod gfxterm
  insmod ${GRUB_VIDEO_BACKEND}
  if terminal_output gfxterm ; then true ; else
    # For backward compatibility with versions of terminal.mod that don't
    # understand terminal_output
    terminal gfxterm
  fi
fi
EOF
  ;;
  x)
    # Just use the native terminal
  ;;
  x*)
    cat << EOF
if terminal_output ${GRUB_TERMINAL_OUTPUT} ; then true ; else
  # For backward compatibility with versions of terminal.mod that don't
  # understand terminal_output
  terminal ${GRUB_TERMINAL_OUTPUT}
fi
EOF
  ;;
esac

cat << EOF
if [ \${recordfail} = 1 ]; then
  set timeout=-1
else
  set timeout=${GRUB_TIMEOUT}
fi
EOF
Avatar utente
Pingue_pinguino
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1514
Iscrizione: giovedì 24 novembre 2005, 17:52
Località: Valsusa

Re: GRUB - Improvvisamente Non parte il conto alla rovescia

Messaggio da Pingue_pinguino »

Ciao,
dopo aver modificato il file /etc/default/grub hai dato il comando

Codice: Seleziona tutto

sudo update-grub
?
manuelina
Prode Principiante
Messaggi: 3
Iscrizione: lunedì 30 novembre 2009, 21:19

Re: GRUB - Improvvisamente Non parte il conto alla rovescia

Messaggio da manuelina »

si si dato
Avatar utente
newentry
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 354
Iscrizione: lunedì 6 agosto 2007, 14:04
Località: Tenerife

Re: GRUB - Improvvisamente Non parte il conto alla rovescia

Messaggio da newentry »

sto avendo lo stesso problema da qualche giorno.
Il parametro 10 secondi è presente nel file di configurazione di grub (era tra virgolette "10", l'ho modificato eliminandole)

Codice: Seleziona tutto

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

Codice: Seleziona tutto

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
ho eseguito il: sudo update-grub

niente da fare.
cosa potrebbe essere?
Avatar utente
newentry
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 354
Iscrizione: lunedì 6 agosto 2007, 14:04
Località: Tenerife

Re: GRUB - Improvvisamente Non parte il conto alla rovescia

Messaggio da newentry »

aggiornamento:
ho fatto caso che in realtà il conto alla rovescia avviene, solo che non vengono visualizzati i numeri.
Ho acceso il pc e dopo il caricamento di grub ho aspettato senza selezionare nulla. Dopo dieci secondi è partito ubuntu (che io ho per default).
Scrivi risposta

Ritorna a “Installazione e aggiornamento del sistema operativo”

Chi c’è in linea

Visualizzano questa sezione: Bing [Bot] e 6 ospiti