Partizioni "incasinate"

Problemi riscontrati durante l'installazione di Ubuntu, degli aggiornamenti e degli avanzamenti del sistema.
Scrivi risposta
Avatar utente
luchicè
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 587
Iscrizione: sabato 4 aprile 2009, 17:24
Contatti:

Partizioni "incasinate"

Messaggio da luchicè »

spiego il titolo "aberrante"...
allora io in teoria sul mio disco dovrei avere quattro installazioni di linux se infatti faccio vedere:

Codice: Seleziona tutto

deepcosco@deepcosco-desktop:~$ sudo fdisk -l
[sudo] password for deepcosco: 

Disco /dev/sda: 160.0 GB, 160041885696 byte
255 testine, 63 settori/tracce, 19457 cilindri
Unità = cilindri di 16065 * 512 = 8225280 byte
Identificativo disco: 0x3dff3dfe

Dispositivo Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1        5128    41190628+  83  Linux
/dev/sda2            5129       19457   115097692+   5  Esteso
/dev/sda5           18708       19457     6024343+  82  Linux swap / Solaris
/dev/sda6            9976       12525    20480000   83  Linux
/dev/sda7           18346       18707     2907733+  82  Linux swap / Solaris
/dev/sda8           12526       12550      200781   83  Linux
/dev/sda9           12551       18345    46548306   8e  Linux LVM
/dev/sda10           5129        9770    37286802   83  Linux
/dev/sda11           9771        9975     1646631   82  Linux swap / Solaris

Le voci nella tabella delle partizioni non sono nello stesso ordine del disco
deepcosco@deepcosco-desktop:~$ 
ecco come si presenta il mio disco, per cui dovrei avere installati ubuntu 9.04, ubuntu 8.10, fedora 10 e kubuntu 9.10
il problema è che allavvio mi fa vedere solo tra le opzioni di scelta ubuntu 9.04 e ubuntu 8.10, e delle altre nemmeno l'ombra...come posso fare in modo da accedere anche alle altre distro? vi posto anche il mio grub

Codice: Seleziona tutto

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default		0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout		10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title		Windows 95/98/NT/2000
# root		(hd0,0)
# makeactive
# chainloader	+1
#
# title		Linux
# root		(hd0,1)
# kernel	/vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=9aa58b27-52f3-4a7c-8ee8-d4ba531db957 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=9aa58b27-52f3-4a7c-8ee8-d4ba531db957

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title		Ubuntu 9.04, kernel 2.6.28-18-generic
uuid		9aa58b27-52f3-4a7c-8ee8-d4ba531db957
kernel		/boot/vmlinuz-2.6.28-18-generic root=UUID=9aa58b27-52f3-4a7c-8ee8-d4ba531db957 ro quiet splash 
initrd		/boot/initrd.img-2.6.28-18-generic
quiet

title		Ubuntu 9.04, kernel 2.6.28-18-generic (recovery mode)
uuid		9aa58b27-52f3-4a7c-8ee8-d4ba531db957
kernel		/boot/vmlinuz-2.6.28-18-generic root=UUID=9aa58b27-52f3-4a7c-8ee8-d4ba531db957 ro  single
initrd		/boot/initrd.img-2.6.28-18-generic

title		Ubuntu 9.04, kernel 2.6.28-11-generic
uuid		9aa58b27-52f3-4a7c-8ee8-d4ba531db957
kernel		/boot/vmlinuz-2.6.28-11-generic root=UUID=9aa58b27-52f3-4a7c-8ee8-d4ba531db957 ro quiet splash 
initrd		/boot/initrd.img-2.6.28-11-generic
quiet

title		Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid		9aa58b27-52f3-4a7c-8ee8-d4ba531db957
kernel		/boot/vmlinuz-2.6.28-11-generic root=UUID=9aa58b27-52f3-4a7c-8ee8-d4ba531db957 ro  single
initrd		/boot/initrd.img-2.6.28-11-generic

title		Ubuntu 9.04, memtest86+
uuid		9aa58b27-52f3-4a7c-8ee8-d4ba531db957
kernel		/boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title		Other operating systems:
root


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title		Ubuntu 8.10, kernel 2.6.27-17-generic (on /dev/sda1)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.27-17-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro splash 
initrd		/boot/initrd.img-2.6.27-17-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title		Ubuntu 8.10, kernel 2.6.27-17-generic (recovery mode) (on /dev/sda1)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.27-17-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro single 
initrd		/boot/initrd.img-2.6.27-17-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title		Ubuntu 8.10, kernel 2.6.27-16-generic (on /dev/sda1)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.27-16-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro splash 
initrd		/boot/initrd.img-2.6.27-16-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title		Ubuntu 8.10, kernel 2.6.27-16-generic (recovery mode) (on /dev/sda1)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.27-16-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro single 
initrd		/boot/initrd.img-2.6.27-16-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title		Ubuntu 8.10, kernel 2.6.27-15-generic (on /dev/sda1)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.27-15-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro splash 
initrd		/boot/initrd.img-2.6.27-15-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title		Ubuntu 8.10, kernel 2.6.27-15-generic (recovery mode) (on /dev/sda1)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.27-15-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro single 
initrd		/boot/initrd.img-2.6.27-15-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title		Ubuntu 8.10, kernel 2.6.27-7-generic (on /dev/sda1)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.27-7-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro splash 
initrd		/boot/initrd.img-2.6.27-7-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title		Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode) (on /dev/sda1)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.27-7-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro single 
initrd		/boot/initrd.img-2.6.27-7-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title		Ubuntu 8.10, memtest86+ (on /dev/sda1)
root		(hd0,0)
kernel		/boot/memtest86+.bin  
savedefault
boot
grazie in anticipo per eventuali aiuti postandovi anche uno screenshot di gparted
Immagine
Ultima modifica di luchicè il venerdì 26 marzo 2010, 16:01, modificato 1 volta in totale.
apicosco.wordpress.com
deegan
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2639
Iscrizione: lunedì 28 aprile 2008, 12:42
Distribuzione: Ubuntu 20.04
Sesso: Maschile
Località: Varese

Re: Partizioni "incasinate"

Messaggio da deegan »

Come pretendi che ti partano:  ???

Fedora10 & Kubuntu9.10 se non aggiungi le loro voci nel menu.lst?  (nono)

Qui hai solo:
Ubuntu 8.10

Codice: Seleziona tutto

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title		Other operating systems:
root


title		Ubuntu 8.10, kernel 2.6.27-17-generic (on /dev/sda1)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.27-17-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro splash 
initrd		/boot/initrd.img-2.6.27-17-generic
savedefault
boot

title		Ubuntu 8.10, kernel 2.6.27-17-generic (recovery mode) (on /dev/sda1)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.27-17-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro single 
initrd		/boot/initrd.img-2.6.27-17-generic
savedefault
boot

title		Ubuntu 8.10, kernel 2.6.27-16-generic (on /dev/sda1)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.27-16-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro splash 
initrd		/boot/initrd.img-2.6.27-16-generic
savedefault
boot

title		Ubuntu 8.10, kernel 2.6.27-16-generic (recovery mode) (on /dev/sda1)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.27-16-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro single 
initrd		/boot/initrd.img-2.6.27-16-generic
savedefault
boot

title		Ubuntu 8.10, kernel 2.6.27-15-generic (on /dev/sda1)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.27-15-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro splash 
initrd		/boot/initrd.img-2.6.27-15-generic
savedefault
boot

title		Ubuntu 8.10, kernel 2.6.27-15-generic (recovery mode) (on /dev/sda1)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.27-15-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro single 
initrd		/boot/initrd.img-2.6.27-15-generic
savedefault
boot

title		Ubuntu 8.10, kernel 2.6.27-7-generic (on /dev/sda1)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.27-7-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro splash 
initrd		/boot/initrd.img-2.6.27-7-generic
savedefault
boot

title		Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode) (on /dev/sda1)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.27-7-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro single 
initrd		/boot/initrd.img-2.6.27-7-generic
savedefault
boot

title		Ubuntu 8.10, memtest86+ (on /dev/sda1)
root		(hd0,0)
kernel		/boot/memtest86+.bin  
savedefault
boot
PS: per quale motivo utilizzi 2 Swap?  ;D
------------------------...........................-------------------

Dovresti aggiungere una cosa del genere:
title kubuntu 9.10, kernel il suo kernel-generic
root (hd0,0)<---la sua partizione
kernel /boot/vmlinuz-il suo kernel-generic root=UUID=Il suo UUID ro splash
initrd /boot/initrd.img-il suo kernel-generic

title kubuntu 9.10, kernel il suo kernel-generic (recovery mode)
root (hd0,0)<---la sua partizione
kernel /boot/vmlinuz-il suo kernel-generic root=UUID=Il suo UUID ro single
initrd /boot/initrd.img-il suo kernel-generic

title kubuntu 9.10, memtest86+ (on /dev/sda1)
root (hd0,0)<---la sua partizione
kernel /boot/memtest86+.bin  

Idem per Fedora 10. ;)
Ultima modifica di deegan il venerdì 26 marzo 2010, 16:19, modificato 1 volta in totale.
MB* ASUS TUF Gaming Z690 SV* EVGA RTX 3080 Ti CPU* i7-12700K
RAM* Vengeance RGB PRO 32GB 3600MHz SSD* Samsung 980 PRO 2TB
Avatar utente
luchicè
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 587
Iscrizione: sabato 4 aprile 2009, 17:24
Contatti:

Re: Partizioni "incasinate"

Messaggio da luchicè »

ehm non lo so ho fatto un po di casinucci  :-[ ....
come posso aggiungere al menu list le altre distro?
non so dirti come mai uso due swap.... sono proprio ignorante...cosa posso fare?

se tramite gparted vado su dev/sda6 e su dev/sda9 mi dice che non sono montate...??
Ultima modifica di luchicè il venerdì 26 marzo 2010, 16:16, modificato 1 volta in totale.
apicosco.wordpress.com
deegan
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2639
Iscrizione: lunedì 28 aprile 2008, 12:42
Distribuzione: Ubuntu 20.04
Sesso: Maschile
Località: Varese

Re: Partizioni "incasinate"

Messaggio da deegan »

Codice: Seleziona tutto

sudo gedit /boot/grub/menu.lst
E fai le modifiche che ti ho postato sopra....... ;)
MB* ASUS TUF Gaming Z690 SV* EVGA RTX 3080 Ti CPU* i7-12700K
RAM* Vengeance RGB PRO 32GB 3600MHz SSD* Samsung 980 PRO 2TB
Avatar utente
luchicè
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 587
Iscrizione: sabato 4 aprile 2009, 17:24
Contatti:

Re: Partizioni "incasinate"

Messaggio da luchicè »

ogggesù mi sa già che faro' dei casini...come li recupero i dati da cambiare e da mettere come da te gentilmente indicato??? tranite gparted??
apicosco.wordpress.com
Avatar utente
luchicè
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 587
Iscrizione: sabato 4 aprile 2009, 17:24
Contatti:

Re: Partizioni "incasinate"

Messaggio da luchicè »

cioè come faccio a sapere qual'è il kernel di fedora e di kubuntu??
apicosco.wordpress.com
deegan
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2639
Iscrizione: lunedì 28 aprile 2008, 12:42
Distribuzione: Ubuntu 20.04
Sesso: Maschile
Località: Varese

Re: Partizioni "incasinate"

Messaggio da deegan »

Da Jaunty entra nelle partizioni di Kubuntu & Fedora e recupera i kernel, poi con:

Codice: Seleziona tutto

sudo vol_id -u /dev/sdaN°della partizione 
Recuperi gli UUID

Senza offesa ma il tuo HD è un campo di guerra..... :o :o :o
MB* ASUS TUF Gaming Z690 SV* EVGA RTX 3080 Ti CPU* i7-12700K
RAM* Vengeance RGB PRO 32GB 3600MHz SSD* Samsung 980 PRO 2TB
Carlin0
Rampante Reduce
Rampante Reduce
Messaggi: 7453
Iscrizione: lunedì 2 novembre 2009, 15:29
Desktop: Gnome 2.30.2
Distribuzione: Debian Squeeze
Località: Augusta Taurinorum

Re: Partizioni "incasinate"

Messaggio da Carlin0 »

ne ha 3 swap non 2  ;D

comunque la 9.10 dovrebbe riconoscerla da solo dando

Codice: Seleziona tutto

sudo update-grub
fedora invece mi sa che devi aggiungerla a mano come ti consiglia deegan

PS: interesserebbe anche sapere in che ordine le hai installate per capire qual'è il grub che agisce sull MBR
Ultima modifica di Carlin0 il venerdì 26 marzo 2010, 16:34, modificato 1 volta in totale.
Avatar utente
luchicè
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 587
Iscrizione: sabato 4 aprile 2009, 17:24
Contatti:

Re: Partizioni "incasinate"

Messaggio da luchicè »

:-[ ahha sissi lo so!!!
sto cercando di capire un po se tramite g parted posso aggiustarlo ma mi sa che è una impresa!
apicosco.wordpress.com
Avatar utente
luchicè
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 587
Iscrizione: sabato 4 aprile 2009, 17:24
Contatti:

Re: Partizioni "incasinate"

Messaggio da luchicè »

Carlin0 ha scritto: ne ha 3 swap non 2  ;D

comunque la 9.10 dovrebbe riconoscerla da solo dando

Codice: Seleziona tutto

sudo update-grub
fedora invece mi sa che devi aggiungerla a mano come ti consiglia deegan
ecco mi sa che è kubuntu questa

Codice: Seleziona tutto

deepcosco@deepcosco-desktop:~$ sudo update-grub
[sudo] password for deepcosco: 
Searching for GRUB installation directory ... found: /boot/grub
Searching for default file ... found: /boot/grub/default
Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst
Searching for splash image ... none found, skipping ...
Found kernel: /boot/vmlinuz-2.6.28-18-generic
Found kernel: /boot/vmlinuz-2.6.28-11-generic
Found kernel: /boot/memtest86+.bin
Updating /boot/grub/menu.lst ... done

deepcosco@deepcosco-desktop:~$ 

apicosco.wordpress.com
Avatar utente
luchicè
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 587
Iscrizione: sabato 4 aprile 2009, 17:24
Contatti:

Re: Partizioni "incasinate"

Messaggio da luchicè »

deegan ha scritto: Da Jaunty entra nelle partizioni di Kubuntu & Fedora e recupera i kernel, poi con:

Codice: Seleziona tutto

sudo vol_id -u /dev/sdaN°della partizione 
Recuperi gli UUID

Senza offesa ma il tuo HD è un campo di guerra..... :o :o :o
non ho capito la prima parte del tuo mess come entre nelle partizioni??? con fdisk -l?
apicosco.wordpress.com
Carlin0
Rampante Reduce
Rampante Reduce
Messaggi: 7453
Iscrizione: lunedì 2 novembre 2009, 15:29
Desktop: Gnome 2.30.2
Distribuzione: Debian Squeeze
Località: Augusta Taurinorum

Re: Partizioni "incasinate"

Messaggio da Carlin0 »

luchicè ha scritto:
ecco mi sa che è kubuntu questa

Codice: Seleziona tutto

deepcosco@deepcosco-desktop:~$ sudo update-grub
[sudo] password for deepcosco: 
Searching for GRUB installation directory ... found: /boot/grub
Searching for default file ... found: /boot/grub/default
Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst
Searching for splash image ... none found, skipping ...
Found kernel: /boot/vmlinuz-2.6.28-18-generic
Found kernel: /boot/vmlinuz-2.6.28-11-generic
Found kernel: /boot/memtest86+.bin
Updating /boot/grub/menu.lst ... done

deepcosco@deepcosco-desktop:~$ 

No sembrerebbe la 9.04 ...

qual'è l'ultima che hai installato ovvero , qual'è il grub su MBR di quale delle distro ?
Avatar utente
luchicè
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 587
Iscrizione: sabato 4 aprile 2009, 17:24
Contatti:

Re: Partizioni "incasinate"

Messaggio da luchicè »

l'ultima che ho instalalto ieri è la 9.04 quella da cui sto scrivendo ora
apicosco.wordpress.com
Avatar utente
luchicè
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 587
Iscrizione: sabato 4 aprile 2009, 17:24
Contatti:

Re: Partizioni "incasinate"

Messaggio da luchicè »

ok forse riesco a recuperare fedora...

Codice: Seleziona tutto

title      fedora 10, kernel il suo kernel-generic
root      (hd0,6)
kernel      /boot/vmlinuz-il suo kernel-generic root=UUID=f9c015ec-4e93-4c27-88a7-a7f9ca7dfe26 ro splash 
initrd      /boot/initrd.img-il suo kernel-generic

title     fedora 10, kernel il suo kernel-generic (recovery mode)
root      (hd0,6)
kernel      /boot/vmlinuz-il suo kernel-generic root=f9c015ec-4e93-4c27-88a7-a7f9ca7dfe26 ro single 
initrd      /boot/initrd.img-il suo kernel-generic

title      kubuntu 9.10, memtest86+ (on /dev/sda1)
root      (hd0,6)
kernel      /boot/memtest86+.bin  
me per il kernel come ottengo le informazioni da aggiungere al grub
apicosco.wordpress.com
Carlin0
Rampante Reduce
Rampante Reduce
Messaggi: 7453
Iscrizione: lunedì 2 novembre 2009, 15:29
Desktop: Gnome 2.30.2
Distribuzione: Debian Squeeze
Località: Augusta Taurinorum

Re: Partizioni "incasinate"

Messaggio da Carlin0 »

Allora devi agire sulle configurazioni di quel grub ...e mi sa che devi aggiungere tutto  a mano
ecco una guida
Avatar utente
luchicè
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 587
Iscrizione: sabato 4 aprile 2009, 17:24
Contatti:

Re: Partizioni "incasinate"

Messaggio da luchicè »

grazie ma io una cosa non riesco a trovare e capire...cioè nel caso di fedora devo inserire il kernel, ma il kernel come lo ottengo??
apicosco.wordpress.com
Avatar utente
Petr
Rampante Reduce
Rampante Reduce
Messaggi: 6203
Iscrizione: lunedì 17 agosto 2009, 1:26
Desktop: Unity
Distribuzione: Ubuntu 14.04 LTS x86_64

Re: Partizioni "incasinate"

Messaggio da Petr »

Ciao!
Il mio suggerimento è: ripristinare il Grub2 di Kubuntu 9.10. Avviare kubuntu e dare

Codice: Seleziona tutto

sudo update-grub
questo caricherà le altre distribuzioni meno fedora.
A questo punto usa questa guida: http://klick-blog.blogspot.com/2010/01/ ... _7203.html per inserire Fedora nel Grub2 di Kubuntu.
Ovviamenete è un suggerimento.
Saluti.
Avatar utente
luchicè
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 587
Iscrizione: sabato 4 aprile 2009, 17:24
Contatti:

Re: Partizioni "incasinate"

Messaggio da luchicè »

mi sa che si va oltre le mie possibilità e non voglio fare troppi casini....e se invece volessi tenermi l'attuale ubuntu 9.04 ed estendere l'altra (che mi si vede) ubuntu 8.10 occupando lo spazio (di fedora e kubuntu) cosa dovrei fare?
apicosco.wordpress.com
deegan
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2639
Iscrizione: lunedì 28 aprile 2008, 12:42
Distribuzione: Ubuntu 20.04
Sesso: Maschile
Località: Varese

Re: Partizioni "incasinate"

Messaggio da deegan »

Non sono sicuro che sia lo stesso tuo kernel di Fedora;
kernel-2.6.18/linux-2.6.18.i686
MB* ASUS TUF Gaming Z690 SV* EVGA RTX 3080 Ti CPU* i7-12700K
RAM* Vengeance RGB PRO 32GB 3600MHz SSD* Samsung 980 PRO 2TB
Avatar utente
luchicè
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 587
Iscrizione: sabato 4 aprile 2009, 17:24
Contatti:

Re: Partizioni "incasinate"

Messaggio da luchicè »

proviamo! la massimo di dice error 15!   :P

grazie per l'aiuto!

provo così spero di non aver sbagliato nulla...

Codice: Seleziona tutto

title      fedora 10, kernel-2.6.18/linux-2.6.18.i686-generic
root      (hd0,7)
kernel      /boot/vmlinuz-kernel-2.6.18/linux-2.6.18.i686-generic root=UUID=f9c015ec-4e93-4c27-88a7-a7f9ca7dfe26 ro splash 
initrd      /boot/initrd.img-kernel-2.6.18/linux-2.6.18.i686-generic

title     fedora 10, kernel-2.6.18/linux-2.6.18.i686-generic (recovery mode)
root      (hd0,7)
kernel      /boot/vmlinuz-kernel-2.6.18/linux-2.6.18.i686-generic root=f9c015ec-4e93-4c27-88a7-a7f9ca7dfe26 ro single 
initrd      /boot/initrd.img-kernel-2.6.18/linux-2.6.18.i686-generic

title      kubuntu 9.10, memtest86+ (on /dev/sda1)
root      (hd0,7)
kernel      /boot/memtest86+.bin  
64 bit no??
Ultima modifica di luchicè il venerdì 26 marzo 2010, 17:20, modificato 1 volta in totale.
apicosco.wordpress.com
Scrivi risposta

Ritorna a “Installazione e aggiornamento del sistema operativo”

Chi c’è in linea

Visualizzano questa sezione: andrea111 e 4 ospiti