[Install] Installato ubuntu si avvia e poi dopo poco schermo bianco

Problemi riscontrati durante l'installazione di Ubuntu, degli aggiornamenti e degli avanzamenti del sistema.
Scrivi risposta
lupo59
Prode Principiante
Messaggi: 9
Iscrizione: giovedì 8 aprile 2010, 18:11

[Install] Installato ubuntu si avvia e poi dopo poco schermo bianco

Messaggio da lupo59 »

ho installato Ubuntu sul mio portatile (c'è anche xp) , dopo un pò ,4/5 minuti , lo schermo diventa bianco e devo spegnere dall'interruttore...
Processore AMD Athlon , scheda video ATI può dipendere da questa ????

Vorrei usarlo..... ciao a tutti 
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco

Messaggio da Alka-Seltzer PLUS »

con XP non succede ?
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
lupo59
Prode Principiante
Messaggi: 9
Iscrizione: giovedì 8 aprile 2010, 18:11

[Install] Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco

Messaggio da lupo59 »

no , infatti ora lo sto usando .
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco

Messaggio da Alka-Seltzer PLUS »

torna su ubuntu e riporta le seguenti informazioni digitando da terminale:

Codice: Seleziona tutto

cat /var/log/dmesg

Codice: Seleziona tutto

lspci

Codice: Seleziona tutto

uname -a
io torno tra più di un'ora
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
lupo59
Prode Principiante
Messaggi: 9
Iscrizione: giovedì 8 aprile 2010, 18:11

[Install] Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco

Messaggio da lupo59 »

spiegati meglio ... sono "novello" , cosa significa da terminale ??
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco

Messaggio da Alka-Seltzer PLUS »

Scusami  :D

Il terminale lo trovi in Applicazioni->Accessori->Terminale.

Una volta aperto inserisci i comandi che ti ho scritto: per farlo basta che li evidenzi e poi, una volta che sei col cursore sopra il terminale ( se hai un mouse esterno )

puoi copiarli direttamente cliccando con la rotellina del mouse.
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
lupo59
Prode Principiante
Messaggi: 9
Iscrizione: giovedì 8 aprile 2010, 18:11

[Install] Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco

Messaggio da lupo59 »

fatto, ha poi installato un pò di aggiornamenti ma ora dopo il login non vapiù , appare in alto a sx un quadrato bianco con angelo@angelo - nevada e chiede un comando.... Quale ??? perchè non va più ??? aiutoooooooooooooo
Avatar utente
Diabolik62
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 16046
Iscrizione: domenica 20 dicembre 2009, 16:29
Distribuzione: wind 10049 archfce4.12

Re: [Install] Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco

Messaggio da Diabolik62 »

lupo59 ha scritto: fatto, ha poi installato un pò di aggiornamenti ma ora dopo il login non vapiù , appare in alto a sx un quadrato bianco con angelo@angelo - nevada e chiede un comando.... Quale ??? perchè non va più ??? aiutoooooooooooooo
(nono)
con i comandi che ti ha
indicato sopra

doveva fare altro
tipo questo

Codice: Seleziona tutto

[    0.200801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.215021] ACPI: PCI Interrupt Link [LNKA] (IRQs 11) *10
[    0.215176] ACPI: PCI Interrupt Link [LNKB] (IRQs 5) *10
[    0.215327] ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *5
[    0.215476] ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
[    0.215625] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
[    0.215775] ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
[    0.215923] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
[    0.216083] ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
[    0.216354] SCSI subsystem initialized
[    0.216366] libata version 3.00 loaded.
[    0.216366] usbcore: registered new interface driver usbfs
[    0.216366] usbcore: registered new interface driver hub
[    0.216366] usbcore: registered new device driver usb
[    0.216366] ACPI: WMI: Mapper loaded
[    0.216366] PCI: Using ACPI for IRQ routing
[    0.228011] Bluetooth: Core ver 2.15
[    0.228019] NET: Registered protocol family 31
[    0.228022] Bluetooth: HCI device and connection manager initialized
[    0.228026] Bluetooth: HCI socket layer initialized
[    0.228029] NetLabel: Initializing
[    0.228032] NetLabel:  domain hash size = 128
[    0.228034] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.228056] NetLabel:  unlabeled traffic allowed by default
[    0.228104] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.228112] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.250380] pnp: PnP ACPI init
[    0.250394] ACPI: bus type pnp registered
[    0.253658] pnp: PnP ACPI: found 10 devices
[    0.253662] ACPI: ACPI bus type pnp unregistered
[    0.253669] PnPBIOS: Disabled by ACPI PNP
[    0.253685] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.253690] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.253695] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.253700] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.253705] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[    0.253709] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.253714] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[    0.253719] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[    0.253731] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[    0.253741] system 00:06: ioport range 0x680-0x69f has been reserved
[    0.253745] system 00:06: ioport range 0x6b0-0x6ff has been reserved
[    0.253750] system 00:06: ioport range 0x800-0x80f has been reserved
[    0.253754] system 00:06: ioport range 0x900-0x90f has been reserved
[    0.253759] system 00:06: ioport range 0x1000-0x107f has been reserved
[    0.253763] system 00:06: ioport range 0x1180-0x11bf has been reserved
[    0.253768] system 00:06: ioport range 0x1640-0x164f has been reserved
[    0.253772] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[    0.288516] AppArmor: AppArmor Filesystem Enabled
[    0.288606] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff]
[    0.288612] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.288616] pci 0000:00:01.0:   IO window: 0x2000-0x2fff
[    0.288623] pci 0000:00:01.0:   MEM window: 0xd2000000-0xd4ffffff
[    0.288629] pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
[    0.288638] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.288643] pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
[    0.288651] pci 0000:00:1c.0:   MEM window: 0xd5000000-0xd50fffff
[    0.288659] pci 0000:00:1c.0:   PREFETCH window: 0xd5200000-0xd52fffff
[    0.288666] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[    0.288669] pci 0000:00:1c.1:   IO window: disabled
[    0.288678] pci 0000:00:1c.1:   MEM window: 0xd5100000-0xd51fffff
[    0.288685] pci 0000:00:1c.1:   PREFETCH window: disabled
[    0.288692] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
[    0.288697] pci 0000:00:1c.2:   IO window: 0x4000-0x4fff
[    0.288706] pci 0000:00:1c.2:   MEM window: 0xd6000000-0xd7ffffff
[    0.288713] pci 0000:00:1c.2:   PREFETCH window: 0x000000d0000000-0x000000d1ffffff
[    0.288724] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
[    0.288727] pci 0000:00:1e.0:   IO window: disabled
[    0.288735] pci 0000:00:1e.0:   MEM window: disabled
[    0.288741] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.288755]   alloc irq_desc for 16 on node -1
[    0.288758]   alloc kstat_irqs on node -1
[    0.288767] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.288773] pci 0000:00:01.0: setting latency timer to 64
[    0.288784]   alloc irq_desc for 17 on node -1
[    0.288786]   alloc kstat_irqs on node -1
[    0.288792] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.288799] pci 0000:00:1c.0: setting latency timer to 64
[    0.288811] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.288818] pci 0000:00:1c.1: setting latency timer to 64
[    0.288828]   alloc irq_desc for 18 on node -1
[    0.288831]   alloc kstat_irqs on node -1
[    0.288837] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.288844] pci 0000:00:1c.2: setting latency timer to 64
[    0.288854] pci 0000:00:1e.0: setting latency timer to 64
[    0.288860] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.288865] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.288869] pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
[    0.288873] pci_bus 0000:01: resource 1 mem: [0xd2000000-0xd4ffffff]
[    0.288878] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[    0.288883] pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
[    0.288887] pci_bus 0000:02: resource 1 mem: [0xd5000000-0xd50fffff]
[    0.288891] pci_bus 0000:02: resource 2 pref mem [0xd5200000-0xd52fffff]
[    0.288896] pci_bus 0000:04: resource 1 mem: [0xd5100000-0xd51fffff]
[    0.288900] pci_bus 0000:06: resource 0 io:  [0x4000-0x4fff]
[    0.288905] pci_bus 0000:06: resource 1 mem: [0xd6000000-0xd7ffffff]
[    0.288909] pci_bus 0000:06: resource 2 pref mem [0xd0000000-0xd1ffffff]
[    0.288913] pci_bus 0000:08: resource 3 io:  [0x00-0xffff]
[    0.288917] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff]
[    0.288965] NET: Registered protocol family 2
[    0.289103] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.289546] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.290141] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.290394] TCP: Hash tables configured (established 131072 bind 65536)
[    0.290398] TCP reno registered
[    0.290497] NET: Registered protocol family 1
[    0.290574] Trying to unpack rootfs image as initramfs...
[    0.502358] Switched to high resolution mode on CPU 1
[    0.503976] Switched to high resolution mode on CPU 0
[    0.609499] Freeing initrd memory: 7722k freed
[    0.614251] Simple Boot Flag at 0x36 set to 0x1
[    0.614516] cpufreq-nforce2: No nForce2 chipset.
[    0.614556] Scanning for low memory corruption every 60 seconds
[    0.614705] audit: initializing netlink socket (disabled)
[    0.614727] type=2000 audit(1270917271.612:1): initialized
[    0.629199] highmem bounce pool size: 64 pages
[    0.629207] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.631581] VFS: Disk quotas dquot_6.5.2
[    0.631677] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.632563] fuse init (API version 7.12)
[    0.632702] msgmni has been set to 1679
[    0.633006] alg: No test for stdrng (krng)
[    0.633029] io scheduler noop registered
[    0.633032] io scheduler anticipatory registered
[    0.633035] io scheduler deadline registered
[    0.633101] io scheduler cfq registered (default)
[    0.633295] pci 0000:01:00.0: Boot video device
[    0.633469]   alloc irq_desc for 24 on node -1
[    0.633472]   alloc kstat_irqs on node -1
[    0.633485] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.633495] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.633769]   alloc irq_desc for 25 on node -1
[    0.633772]   alloc kstat_irqs on node -1
[    0.633793] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.633820] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.634193]   alloc irq_desc for 26 on node -1
[    0.634196]   alloc kstat_irqs on node -1
[    0.634217] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[    0.634244] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    0.634615]   alloc irq_desc for 27 on node -1
[    0.634618]   alloc kstat_irqs on node -1
[    0.634639] pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
[    0.634666] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    0.634889] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.635097] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.635588] ACPI: AC Adapter [ADP1] (on-line)
[    0.635678] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.635683] ACPI: Power Button [PWRF]
[    0.635787] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.635847] ACPI: Lid Switch [LID0]
[    0.635926] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    0.635937] ACPI: Power Button [PWRB]
[    0.636003] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[    0.636007] ACPI: Sleep Button [SLPB]
[    0.636178] fan PNP0C0B:00: registered as cooling_device0
[    0.636187] ACPI: Fan [FAN0] (off)
[    0.637233] ACPI: SSDT bfed7dc2 0036A (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.638027] ACPI: SSDT bfed7723 0061A (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.641611] Monitor-Mwait will be used to enter C-1 state
[    0.641648] Monitor-Mwait will be used to enter C-2 state
[    0.641660] Marking TSC unstable due to TSC halts in idle
[    0.641681] ACPI: CPU0 (power states: C1[C1] C2[C2])
[    0.641710] processor LNXCPU:00: registered as cooling_device1
[    0.641716] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.642252] ACPI: SSDT bfed812c 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.642797] ACPI: SSDT bfed7d3d 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.644330] ACPI: CPU1 (power states: C1[C1] C2[C2])
[    0.644360] processor LNXCPU:01: registered as cooling_device2
[    0.644366] ACPI: Processor [CPU1] (supports 8 throttling states)
[    0.648761] thermal LNXTHERM:01: registered as thermal_zone0
[    0.648775] ACPI: Thermal Zone [TZ00] (46 C)
[    0.649518] thermal LNXTHERM:02: registered as thermal_zone1
[    0.649531] ACPI: Thermal Zone [TZ01] (46 C)
[    0.649623] isapnp: Scanning for PnP cards...
[    0.744139] ACPI: Battery Slot [BAT1] (battery absent)
[    1.006849] isapnp: No Plug & Play device found
[    1.008694] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.010756] brd: module loaded
[    1.011468] loop: module loaded
[    1.011570] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    1.011732] ata_piix 0000:00:1f.2: version 2.13
[    1.011760]   alloc irq_desc for 19 on node -1
[    1.011763]   alloc kstat_irqs on node -1
[    1.011771] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.011783] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    1.164043] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.164162] scsi0 : ata_piix
[    1.164283] scsi1 : ata_piix
[    1.165837] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
[    1.165842] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
[    1.167190] Fixed MDIO Bus: probed
[    1.167248] PPP generic driver version 2.4.2
[    1.167376] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.167406] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.167426] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    1.167433] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.167477] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.171426] ehci_hcd 0000:00:1a.7: debug port 1
[    1.171442] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    1.171463] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd5404000
[    1.184041] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.184155] usb usb1: configuration #1 chosen from 1 choice
[    1.184199] hub 1-0:1.0: USB hub found
[    1.184209] hub 1-0:1.0: 4 ports detected
[    1.184298]   alloc irq_desc for 23 on node -1
[    1.184301]   alloc kstat_irqs on node -1
[    1.184308] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.184326] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.184333] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.184376] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.188304] ehci_hcd 0000:00:1d.7: debug port 1
[    1.188319] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.188339] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd5404400
[    1.200038] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.200133] usb usb2: configuration #1 chosen from 1 choice
[    1.200174] hub 2-0:1.0: USB hub found
[    1.200184] hub 2-0:1.0: 6 ports detected
[    1.200279] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.200303] uhci_hcd: USB Universal Host Controller Interface driver
[    1.200334] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.200347] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.200354] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.200397] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.200453] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[    1.200581] usb usb3: configuration #1 chosen from 1 choice
[    1.200621] hub 3-0:1.0: USB hub found
[    1.200631] hub 3-0:1.0: 2 ports detected
[    1.200700]   alloc irq_desc for 21 on node -1
[    1.200703]   alloc kstat_irqs on node -1
[    1.200710] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.200723] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.200730] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.200776] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.200830] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[    1.200951] usb usb4: configuration #1 chosen from 1 choice
[    1.200991] hub 4-0:1.0: USB hub found
[    1.201024] hub 4-0:1.0: 2 ports detected
[    1.201096] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.201110] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.201117] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.201163] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    1.201205] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[    1.201321] usb usb5: configuration #1 chosen from 1 choice
[    1.201361] hub 5-0:1.0: USB hub found
[    1.201370] hub 5-0:1.0: 2 ports detected
[    1.201444] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.201457] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.201464] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.201516] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    1.201569] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[    1.201684] usb usb6: configuration #1 chosen from 1 choice
[    1.201724] hub 6-0:1.0: USB hub found
[    1.201734] hub 6-0:1.0: 2 ports detected
[    1.201807] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.201820] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.201827] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.201870] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    1.201912] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[    1.202032] usb usb7: configuration #1 chosen from 1 choice
[    1.202073] hub 7-0:1.0: USB hub found
[    1.202082] hub 7-0:1.0: 2 ports detected
[    1.202225] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.205371] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.207023] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.207032] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.207036] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.207041] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.207046] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.207130] mice: PS/2 mouse device common for all mice
[    1.207401] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.207444] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.207593] device-mapper: uevent: version 1.0.3
[    1.207730] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    1.207876] device-mapper: multipath: version 1.1.0 loaded
[    1.207880] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.208062] EISA: Probing bus 0 at eisa.0
[    1.208073] Cannot allocate resource for EISA slot 1
[    1.208076] Cannot allocate resource for EISA slot 2
[    1.208080] Cannot allocate resource for EISA slot 3
[    1.208083] Cannot allocate resource for EISA slot 4
[    1.208113] EISA: Detected 0 cards.
[    1.208370] cpuidle: using governor ladder
[    1.208515] cpuidle: using governor menu
[    1.209296] TCP cubic registered
[    1.209539] NET: Registered protocol family 10
[    1.210242] lo: Disabled Privacy Extensions
[    1.210790] NET: Registered protocol family 17
[    1.210816] Bluetooth: L2CAP ver 2.13
[    1.210818] Bluetooth: L2CAP socket layer initialized
[    1.210823] Bluetooth: SCO (Voice Link) ver 0.6
[    1.210825] Bluetooth: SCO socket layer initialized
[    1.210881] Bluetooth: RFCOMM TTY layer initialized
[    1.210886] Bluetooth: RFCOMM socket layer initialized
[    1.210889] Bluetooth: RFCOMM ver 1.11
[    1.211666] Using IPI No-Shortcut mode
[    1.211716] PM: Resume from disk failed.
[    1.211725] registered taskstats version 1
[    1.211804]   Magic number: 6:464:590
[    1.211874] rtc_cmos 00:07: setting system clock to 2010-04-10 16:34:32 UTC (1270917272)
[    1.211876] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.211878] EDD information not available.
[    1.230063] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    1.328767] ata1.00: ATA-8: Hitachi HTS542525K9A300, BBFOC3EP, max UDMA/133
[    1.328770] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.336674] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L632H, SC04, max UDMA/33
[    1.344625] ata1.00: configured for UDMA/133
[    1.344713] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[    1.344803] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.344832] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.344869] sd 0:0:0:0: [sda] Write Protect is off
[    1.344871] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.344890] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.344985]  sda:
[    1.352291] ata2.00: configured for UDMA/33
[    1.358038] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L632H  SC04 PQ: 0 ANSI: 5
[    1.359081]  sda1 sda2 sda3 <sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.373479] Uniform CD-ROM driver Revision: 3.20
[    1.373537] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.373569] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.381340]  sda5 sda6 sda7 sda8 >
[    1.419981] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.420022] Freeing unused kernel memory: 540k freed
[    1.420312] Write protecting the kernel text: 4580k
[    1.420355] Write protecting the kernel read-only data: 1840k
[    1.496052] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.511272] Linux agpgart interface v0.103
[    1.646332] sky2 driver version 1.23
[    1.646416] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.646471] sky2 0000:02:00.0: setting latency timer to 64
[    1.646554] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3
[    1.647147]   alloc irq_desc for 28 on node -1
[    1.647148]   alloc kstat_irqs on node -1
[    1.647217] sky2 0000:02:00.0: irq 28 for MSI/MSI-X
[    1.648130] sky2 eth0: addr 00:13:77:66:c5:23
[    1.685603] ACPI: Cant attach device
[    1.687649] acpi device:05: registered as cooling_device3
[    1.687763] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input6
[    1.687798] ACPI: Video Device [NVID] (multi-head: yes  rom: no  post: no)
[    1.758830] usb 1-1: configuration #1 chosen from 1 choice
[    2.168058] usb 5-2: new low speed USB device using uhci_hcd and address 2
[    2.415316] usb 5-2: configuration #1 chosen from 1 choice
[    2.433073] usbcore: registered new interface driver hiddev
[    2.447468] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input7
[    2.447528] generic-usb 0003:045E:00A4.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.0-2/input0
[    2.447539] usbcore: registered new interface driver usbhid
[    2.447541] usbhid: v2.6:USB HID core driver
[    2.664044] usb 7-2: new full speed USB device using uhci_hcd and address 2
[    2.915026] usb 7-2: configuration #1 chosen from 1 choice
[    3.085308] xor: automatically using best checksumming function: pIII_sse
[    3.105014]    pIII_sse  :  8880.000 MB/sec
[    3.105016] xor: using function: pIII_sse (8880.000 MB/sec)
[    3.106990] device-mapper: dm-raid45: initialized v0.2594b
[    3.454719] PM: Starting manual resume from disk
[    3.454723] PM: Resume from partition 8:8
[    3.454725] PM: Checking hibernation image.
[    3.476144] PM: Resume from disk failed.
[    3.498732] EXT4-fs (sda5): barriers enabled
[    3.519708] kjournald2 starting: pid 415, dev sda5:8, commit interval 5 seconds
[    3.519790] EXT4-fs (sda5): delayed allocation enabled
[    3.519793] EXT4-fs: file extents enabled
[    3.521830] EXT4-fs: mballoc enabled
[    3.521842] EXT4-fs (sda5): mounted filesystem with ordered data mode
[    4.275790] type=1505 audit(1270917275.560:2): operation="profile_load" pid=440 name=/usr/share/gdm/guest-session/Xsession
[    4.281867] type=1505 audit(1270917275.568:3): operation="profile_load" pid=441 name=/sbin/dhclient3
[    4.282469] type=1505 audit(1270917275.568:4): operation="profile_load" pid=441 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    4.282795] type=1505 audit(1270917275.568:5): operation="profile_load" pid=441 name=/usr/lib/connman/scripts/dhclient-script
[    4.337688] type=1505 audit(1270917275.624:6): operation="profile_load" pid=442 name=/usr/bin/evince
[    4.347354] type=1505 audit(1270917275.633:7): operation="profile_load" pid=442 name=/usr/bin/evince-previewer
[    4.353084] type=1505 audit(1270917275.641:8): operation="profile_load" pid=442 name=/usr/bin/evince-thumbnailer
[    4.388949] type=1505 audit(1270917275.673:9): operation="profile_load" pid=444 name=/usr/bin/freshclam
[   19.600967] udev: starting version 147
[   19.636522] Adding 2731008k swap on /dev/sda8.  Priority:-1 extents:1 across:2731008k 
[   19.712832] [drm] Initialized drm 1.1.0 20060810
[   19.720560] cfg80211: Calling CRDA to update world regulatory domain
[   19.726738] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   19.726745] pci 0000:01:00.0: setting latency timer to 64
[   19.728203] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086500a2)
[   19.728796] [drm] Initialized nouveau 0.0.15 v2.6.31-rc6-539-ged53f9fcabd42f004 for 0000:01:00.0 on minor 0
[   19.748643] Bluetooth: Generic Bluetooth USB driver ver 0.5
[   19.748745] usbcore: registered new interface driver btusb
[   19.771206] lp: driver loaded but no devices found
[   19.828848] cfg80211: World regulatory domain updated:
[   19.828852] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   19.828854] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.828857] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.828859] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.828861] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.828863] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.843412] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[   19.843414] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[   19.843530] iwl3945 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   19.843544] iwl3945 0000:04:00.0: setting latency timer to 64
[   19.863421] ip_tables: (C) 2000-2006 Netfilter Core Team
[   19.867541] Linux video capture interface: v2.00
[   19.870474] uvcvideo: Found UVC 1.00 device Vega USB 2.0 Camera. (0ac8:c302)
[   19.880422] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   19.880643] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   19.880645] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[   19.880647] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   19.899003] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   19.932552] EXT4-fs (sda5): internal journal on sda5:8
[   19.935805] iwl3945 0000:04:00.0: Tunable channels: 11 802.11bg, 0 802.11a channels
[   19.935809] iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945BG
[   19.935926]   alloc irq_desc for 29 on node -1
[   19.935928]   alloc kstat_irqs on node -1
[   19.935960] iwl3945 0000:04:00.0: irq 29 for MSI/MSI-X
[   19.936557] input: Vega USB 2.0 Camera. as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input8
[   19.936604] usbcore: registered new interface driver uvcvideo
[   19.936606] USB Video Class driver (v0.1.0)
[   19.977797]   alloc irq_desc for 22 on node -1
[   19.977800]   alloc kstat_irqs on node -1
[   19.977806] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   19.977838] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   19.985464] phy0: Selected rate control algorithm 'iwl-3945-rs'
[   20.048361] hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
[   20.048423] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[   20.472070] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04713/0x200000
[   20.508218] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[   21.699288] EXT4-fs (sda6): barriers enabled
[   21.701945] kjournald2 starting: pid 1171, dev sda6:8, commit interval 5 seconds
[   21.702256] EXT4-fs (sda6): internal journal on sda6:8
[   21.702259] EXT4-fs (sda6): delayed allocation enabled
[   21.702262] EXT4-fs: file extents enabled
[   21.702366] EXT4-fs: mballoc enabled
[   21.702378] EXT4-fs (sda6): mounted filesystem with ordered data mode
[   21.834532] sky2 eth0: enabling interface
[   21.834728] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.837369] iwl3945 0000:04:00.0: firmware: requesting iwlwifi-3945-2.ucode
[   21.851990] iwl3945 0000:04:00.0: loaded firmware version 15.32.2.9
[   21.870711] __ratelimit: 12 callbacks suppressed
[   21.870714] type=1505 audit(1270910093.157:14): operation="profile_replace" pid=1318 name=/usr/share/gdm/guest-session/Xsession
[   21.872122] type=1505 audit(1270910093.157:15): operation="profile_replace" pid=1319 name=/sbin/dhclient3
[   21.872723] type=1505 audit(1270910093.157:16): operation="profile_replace" pid=1319 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   21.873050] type=1505 audit(1270910093.161:17): operation="profile_replace" pid=1319 name=/usr/lib/connman/scripts/dhclient-script
[   21.876285] type=1505 audit(1270910093.161:18): operation="profile_replace" pid=1320 name=/usr/bin/evince
[   21.886072] type=1505 audit(1270910093.173:19): operation="profile_replace" pid=1320 name=/usr/bin/evince-previewer
[   21.892919] type=1505 audit(1270910093.177:20): operation="profile_replace" pid=1320 name=/usr/bin/evince-thumbnailer
[   21.900831] type=1505 audit(1270910093.185:21): operation="profile_replace" pid=1322 name=/usr/bin/freshclam
[   21.902461] type=1505 audit(1270910093.189:22): operation="profile_replace" pid=1323 name=/usr/lib/cups/backend/cups-pdf
[   21.903165] type=1505 audit(1270910093.189:23): operation="profile_replace" pid=1323 name=/usr/sbin/cupsd
[   21.930376] Registered led device: iwl-phy0::radio
[   21.930393] Registered led device: iwl-phy0::assoc
[   21.930407] Registered led device: iwl-phy0::RX
[   21.930419] Registered led device: iwl-phy0::TX
[   21.992334] ADDRCONF(NETDEV_UP): wlan0: link is not ready
ettore@ettore-laptop:~$ 


ettore@ettore-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8600M GS] (rev a1)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 13)
04:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
ettore@ettore-laptop:~$ uname -a
Linux ettore-laptop 2.6.31-20-generic #58-Ubuntu SMP Fri Mar 12 05:23:09 UTC 2010 i686 GNU/Linux
ettore@ettore-laptop:~$ 
Ultima modifica di Anonymous il sabato 10 aprile 2010, 17:14, modificato 1 volta in totale.
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: [Install] Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco

Messaggio da Alka-Seltzer PLUS »

lupo59 ha scritto: fatto, ha poi installato un pò di aggiornamenti ma ora dopo il login non vapiù , appare in alto a sx un quadrato bianco con angelo@angelo - nevada e chiede un comando.... Quale ??? perchè non va più ??? aiutoooooooooooooo
ma come ??? La calma innanzitutto:stai dicendo che non va più la grafica ? Ah... ma tanto non andava neanche prima :D

Beh allora prova, una volta che sei su "angelo@angelo" a scrivere questa sequenza di comandi rispettando maiuscole e minuscole:

Codice: Seleziona tutto

sudo cp /etc/X11/xorg.conf /etc/X11/xorg.bak
<- copia la configurazione video attuale

Codice: Seleziona tutto

sudo X -configure
<- riconfigura la grafica

Codice: Seleziona tutto

sudo cp xorg.conf.new /etc/X11/xorg.conf
<- copia il nuovo file di configurazione della grafica

Codice: Seleziona tutto

sudo reboot
<- riavvia

PS: ti chiederà la tua password e non ti farà vedere cosa digiti mentre la scrivi: tu scrivila alla cieca e premi invio ok ?
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
lupo59
Prode Principiante
Messaggi: 9
Iscrizione: giovedì 8 aprile 2010, 18:11

[Install] Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco

Messaggio da lupo59 »

ok ma non esegue il primo comando dice : impossibile eseguire stat di /etc/x11/xorg.bak nessun file o directory

che faccio ???
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco

Messaggio da Alka-Seltzer PLUS »

Allora parti dal secondo !
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
lupo59
Prode Principiante
Messaggi: 9
Iscrizione: giovedì 8 aprile 2010, 18:11

[Install] Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco

Messaggio da lupo59 »

fatto. esce il messaggio :fatal server error : server is already active for display 0 remove /temp/.x0-lock

sono poi riuscito ad accedere con sessione GNOME ma , come al solito dopo un pò lo schermo diventa bianco e... amen!!
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco

Messaggio da Alka-Seltzer PLUS »

Mi sono dimenticato un comando:

Codice: Seleziona tutto

sudo /etc/init.d/gdm stop
questo lo devi dare all'inizio !

Poi, come da citazione:

Codice: Seleziona tutto

sudo X -configure
<- riconfigura la grafica

Codice: Seleziona tutto

sudo cp xorg.conf.new /etc/X11/xorg.conf
<- copia il nuovo file di configurazione della grafica

Codice: Seleziona tutto

sudo reboot
<- riavvia
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
lupo59
Prode Principiante
Messaggi: 9
Iscrizione: giovedì 8 aprile 2010, 18:11

[Install] Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco

Messaggio da lupo59 »

niente , torno sempre a  : impossibile eseguire stat ................. nessun file o directory  :'(
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco

Messaggio da Alka-Seltzer PLUS »

ma ... come ??? Mannaggia ... mandami un messaggio privato ci rilavoriamo su in settimana :D
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Scrivi risposta

Ritorna a “Installazione e aggiornamento del sistema operativo”

Chi c’è in linea

Visualizzano questa sezione: Bing [Bot] e 8 ospiti