[Install] Installato ubuntu si avvia e poi dopo poco schermo bianco
[Install] Installato ubuntu si avvia e poi dopo poco schermo bianco
ho installato Ubuntu sul mio portatile (c'è anche xp) , dopo un pò ,4/5 minuti , lo schermo diventa bianco e devo spegnere dall'interruttore...
Processore AMD Athlon , scheda video ATI può dipendere da questa ????
Vorrei usarlo..... ciao a tutti
Processore AMD Athlon , scheda video ATI può dipendere da questa ????
Vorrei usarlo..... ciao a tutti
- Alka-Seltzer PLUS
- Rampante Reduce

- Messaggi: 8887
- Iscrizione: venerdì 18 settembre 2009, 13:29
- Desktop: Unity + Gnome flashback
- Distribuzione: Ubuntu 16.04 & 14.04 64bit
Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco
con XP non succede ?
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
[Install] Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco
no , infatti ora lo sto usando .
- Alka-Seltzer PLUS
- Rampante Reduce

- Messaggi: 8887
- Iscrizione: venerdì 18 settembre 2009, 13:29
- Desktop: Unity + Gnome flashback
- Distribuzione: Ubuntu 16.04 & 14.04 64bit
Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco
torna su ubuntu e riporta le seguenti informazioni digitando da terminale:
io torno tra più di un'ora
Codice: Seleziona tutto
cat /var/log/dmesgCodice: Seleziona tutto
lspciCodice: Seleziona tutto
uname -a| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
[Install] Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco
spiegati meglio ... sono "novello" , cosa significa da terminale ??
- Alka-Seltzer PLUS
- Rampante Reduce

- Messaggi: 8887
- Iscrizione: venerdì 18 settembre 2009, 13:29
- Desktop: Unity + Gnome flashback
- Distribuzione: Ubuntu 16.04 & 14.04 64bit
Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco
Scusami 
Il terminale lo trovi in Applicazioni->Accessori->Terminale.
Una volta aperto inserisci i comandi che ti ho scritto: per farlo basta che li evidenzi e poi, una volta che sei col cursore sopra il terminale ( se hai un mouse esterno )
puoi copiarli direttamente cliccando con la rotellina del mouse.
Il terminale lo trovi in Applicazioni->Accessori->Terminale.
Una volta aperto inserisci i comandi che ti ho scritto: per farlo basta che li evidenzi e poi, una volta che sei col cursore sopra il terminale ( se hai un mouse esterno )
puoi copiarli direttamente cliccando con la rotellina del mouse.
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
[Install] Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco
fatto, ha poi installato un pò di aggiornamenti ma ora dopo il login non vapiù , appare in alto a sx un quadrato bianco con angelo@angelo - nevada e chiede un comando.... Quale ??? perchè non va più ??? aiutoooooooooooooo
- Diabolik62
- Tenace Tecnocrate

- Messaggi: 16046
- Iscrizione: domenica 20 dicembre 2009, 16:29
- Distribuzione: wind 10049 archfce4.12
Re: [Install] Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco
(nono)lupo59 ha scritto: fatto, ha poi installato un pò di aggiornamenti ma ora dopo il login non vapiù , appare in alto a sx un quadrato bianco con angelo@angelo - nevada e chiede un comando.... Quale ??? perchè non va più ??? aiutoooooooooooooo
con i comandi che ti ha
indicato sopra
doveva fare altro
tipo questo
Codice: Seleziona tutto
[ 0.200801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.215021] ACPI: PCI Interrupt Link [LNKA] (IRQs 11) *10
[ 0.215176] ACPI: PCI Interrupt Link [LNKB] (IRQs 5) *10
[ 0.215327] ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *5
[ 0.215476] ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
[ 0.215625] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
[ 0.215775] ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
[ 0.215923] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
[ 0.216083] ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
[ 0.216354] SCSI subsystem initialized
[ 0.216366] libata version 3.00 loaded.
[ 0.216366] usbcore: registered new interface driver usbfs
[ 0.216366] usbcore: registered new interface driver hub
[ 0.216366] usbcore: registered new device driver usb
[ 0.216366] ACPI: WMI: Mapper loaded
[ 0.216366] PCI: Using ACPI for IRQ routing
[ 0.228011] Bluetooth: Core ver 2.15
[ 0.228019] NET: Registered protocol family 31
[ 0.228022] Bluetooth: HCI device and connection manager initialized
[ 0.228026] Bluetooth: HCI socket layer initialized
[ 0.228029] NetLabel: Initializing
[ 0.228032] NetLabel: domain hash size = 128
[ 0.228034] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.228056] NetLabel: unlabeled traffic allowed by default
[ 0.228104] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.228112] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.250380] pnp: PnP ACPI init
[ 0.250394] ACPI: bus type pnp registered
[ 0.253658] pnp: PnP ACPI: found 10 devices
[ 0.253662] ACPI: ACPI bus type pnp unregistered
[ 0.253669] PnPBIOS: Disabled by ACPI PNP
[ 0.253685] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.253690] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.253695] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.253700] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.253705] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.253709] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.253714] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.253719] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.253731] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.253741] system 00:06: ioport range 0x680-0x69f has been reserved
[ 0.253745] system 00:06: ioport range 0x6b0-0x6ff has been reserved
[ 0.253750] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.253754] system 00:06: ioport range 0x900-0x90f has been reserved
[ 0.253759] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 0.253763] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 0.253768] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 0.253772] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[ 0.288516] AppArmor: AppArmor Filesystem Enabled
[ 0.288606] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff]
[ 0.288612] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.288616] pci 0000:00:01.0: IO window: 0x2000-0x2fff
[ 0.288623] pci 0000:00:01.0: MEM window: 0xd2000000-0xd4ffffff
[ 0.288629] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.288638] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.288643] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 0.288651] pci 0000:00:1c.0: MEM window: 0xd5000000-0xd50fffff
[ 0.288659] pci 0000:00:1c.0: PREFETCH window: 0xd5200000-0xd52fffff
[ 0.288666] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 0.288669] pci 0000:00:1c.1: IO window: disabled
[ 0.288678] pci 0000:00:1c.1: MEM window: 0xd5100000-0xd51fffff
[ 0.288685] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.288692] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
[ 0.288697] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 0.288706] pci 0000:00:1c.2: MEM window: 0xd6000000-0xd7ffffff
[ 0.288713] pci 0000:00:1c.2: PREFETCH window: 0x000000d0000000-0x000000d1ffffff
[ 0.288724] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
[ 0.288727] pci 0000:00:1e.0: IO window: disabled
[ 0.288735] pci 0000:00:1e.0: MEM window: disabled
[ 0.288741] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.288755] alloc irq_desc for 16 on node -1
[ 0.288758] alloc kstat_irqs on node -1
[ 0.288767] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.288773] pci 0000:00:01.0: setting latency timer to 64
[ 0.288784] alloc irq_desc for 17 on node -1
[ 0.288786] alloc kstat_irqs on node -1
[ 0.288792] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.288799] pci 0000:00:1c.0: setting latency timer to 64
[ 0.288811] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.288818] pci 0000:00:1c.1: setting latency timer to 64
[ 0.288828] alloc irq_desc for 18 on node -1
[ 0.288831] alloc kstat_irqs on node -1
[ 0.288837] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.288844] pci 0000:00:1c.2: setting latency timer to 64
[ 0.288854] pci 0000:00:1e.0: setting latency timer to 64
[ 0.288860] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.288865] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.288869] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.288873] pci_bus 0000:01: resource 1 mem: [0xd2000000-0xd4ffffff]
[ 0.288878] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.288883] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
[ 0.288887] pci_bus 0000:02: resource 1 mem: [0xd5000000-0xd50fffff]
[ 0.288891] pci_bus 0000:02: resource 2 pref mem [0xd5200000-0xd52fffff]
[ 0.288896] pci_bus 0000:04: resource 1 mem: [0xd5100000-0xd51fffff]
[ 0.288900] pci_bus 0000:06: resource 0 io: [0x4000-0x4fff]
[ 0.288905] pci_bus 0000:06: resource 1 mem: [0xd6000000-0xd7ffffff]
[ 0.288909] pci_bus 0000:06: resource 2 pref mem [0xd0000000-0xd1ffffff]
[ 0.288913] pci_bus 0000:08: resource 3 io: [0x00-0xffff]
[ 0.288917] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff]
[ 0.288965] NET: Registered protocol family 2
[ 0.289103] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.289546] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.290141] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.290394] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.290398] TCP reno registered
[ 0.290497] NET: Registered protocol family 1
[ 0.290574] Trying to unpack rootfs image as initramfs...
[ 0.502358] Switched to high resolution mode on CPU 1
[ 0.503976] Switched to high resolution mode on CPU 0
[ 0.609499] Freeing initrd memory: 7722k freed
[ 0.614251] Simple Boot Flag at 0x36 set to 0x1
[ 0.614516] cpufreq-nforce2: No nForce2 chipset.
[ 0.614556] Scanning for low memory corruption every 60 seconds
[ 0.614705] audit: initializing netlink socket (disabled)
[ 0.614727] type=2000 audit(1270917271.612:1): initialized
[ 0.629199] highmem bounce pool size: 64 pages
[ 0.629207] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.631581] VFS: Disk quotas dquot_6.5.2
[ 0.631677] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.632563] fuse init (API version 7.12)
[ 0.632702] msgmni has been set to 1679
[ 0.633006] alg: No test for stdrng (krng)
[ 0.633029] io scheduler noop registered
[ 0.633032] io scheduler anticipatory registered
[ 0.633035] io scheduler deadline registered
[ 0.633101] io scheduler cfq registered (default)
[ 0.633295] pci 0000:01:00.0: Boot video device
[ 0.633469] alloc irq_desc for 24 on node -1
[ 0.633472] alloc kstat_irqs on node -1
[ 0.633485] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.633495] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.633769] alloc irq_desc for 25 on node -1
[ 0.633772] alloc kstat_irqs on node -1
[ 0.633793] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.633820] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.634193] alloc irq_desc for 26 on node -1
[ 0.634196] alloc kstat_irqs on node -1
[ 0.634217] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.634244] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.634615] alloc irq_desc for 27 on node -1
[ 0.634618] alloc kstat_irqs on node -1
[ 0.634639] pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 0.634666] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.634889] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.635097] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.635588] ACPI: AC Adapter [ADP1] (on-line)
[ 0.635678] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.635683] ACPI: Power Button [PWRF]
[ 0.635787] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.635847] ACPI: Lid Switch [LID0]
[ 0.635926] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 0.635937] ACPI: Power Button [PWRB]
[ 0.636003] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 0.636007] ACPI: Sleep Button [SLPB]
[ 0.636178] fan PNP0C0B:00: registered as cooling_device0
[ 0.636187] ACPI: Fan [FAN0] (off)
[ 0.637233] ACPI: SSDT bfed7dc2 0036A (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.638027] ACPI: SSDT bfed7723 0061A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.641611] Monitor-Mwait will be used to enter C-1 state
[ 0.641648] Monitor-Mwait will be used to enter C-2 state
[ 0.641660] Marking TSC unstable due to TSC halts in idle
[ 0.641681] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 0.641710] processor LNXCPU:00: registered as cooling_device1
[ 0.641716] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.642252] ACPI: SSDT bfed812c 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.642797] ACPI: SSDT bfed7d3d 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.644330] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 0.644360] processor LNXCPU:01: registered as cooling_device2
[ 0.644366] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.648761] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.648775] ACPI: Thermal Zone [TZ00] (46 C)
[ 0.649518] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.649531] ACPI: Thermal Zone [TZ01] (46 C)
[ 0.649623] isapnp: Scanning for PnP cards...
[ 0.744139] ACPI: Battery Slot [BAT1] (battery absent)
[ 1.006849] isapnp: No Plug & Play device found
[ 1.008694] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.010756] brd: module loaded
[ 1.011468] loop: module loaded
[ 1.011570] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 1.011732] ata_piix 0000:00:1f.2: version 2.13
[ 1.011760] alloc irq_desc for 19 on node -1
[ 1.011763] alloc kstat_irqs on node -1
[ 1.011771] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.011783] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.164043] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.164162] scsi0 : ata_piix
[ 1.164283] scsi1 : ata_piix
[ 1.165837] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
[ 1.165842] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
[ 1.167190] Fixed MDIO Bus: probed
[ 1.167248] PPP generic driver version 2.4.2
[ 1.167376] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.167406] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.167426] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.167433] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.167477] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.171426] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.171442] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.171463] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd5404000
[ 1.184041] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.184155] usb usb1: configuration #1 chosen from 1 choice
[ 1.184199] hub 1-0:1.0: USB hub found
[ 1.184209] hub 1-0:1.0: 4 ports detected
[ 1.184298] alloc irq_desc for 23 on node -1
[ 1.184301] alloc kstat_irqs on node -1
[ 1.184308] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.184326] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.184333] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.184376] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.188304] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.188319] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.188339] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd5404400
[ 1.200038] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.200133] usb usb2: configuration #1 chosen from 1 choice
[ 1.200174] hub 2-0:1.0: USB hub found
[ 1.200184] hub 2-0:1.0: 6 ports detected
[ 1.200279] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.200303] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.200334] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.200347] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.200354] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.200397] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.200453] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 1.200581] usb usb3: configuration #1 chosen from 1 choice
[ 1.200621] hub 3-0:1.0: USB hub found
[ 1.200631] hub 3-0:1.0: 2 ports detected
[ 1.200700] alloc irq_desc for 21 on node -1
[ 1.200703] alloc kstat_irqs on node -1
[ 1.200710] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.200723] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.200730] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.200776] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.200830] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 1.200951] usb usb4: configuration #1 chosen from 1 choice
[ 1.200991] hub 4-0:1.0: USB hub found
[ 1.201024] hub 4-0:1.0: 2 ports detected
[ 1.201096] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.201110] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.201117] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.201163] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.201205] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 1.201321] usb usb5: configuration #1 chosen from 1 choice
[ 1.201361] hub 5-0:1.0: USB hub found
[ 1.201370] hub 5-0:1.0: 2 ports detected
[ 1.201444] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.201457] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.201464] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.201516] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.201569] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 1.201684] usb usb6: configuration #1 chosen from 1 choice
[ 1.201724] hub 6-0:1.0: USB hub found
[ 1.201734] hub 6-0:1.0: 2 ports detected
[ 1.201807] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.201820] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.201827] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.201870] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.201912] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 1.202032] usb usb7: configuration #1 chosen from 1 choice
[ 1.202073] hub 7-0:1.0: USB hub found
[ 1.202082] hub 7-0:1.0: 2 ports detected
[ 1.202225] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.205371] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.207023] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.207032] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.207036] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.207041] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.207046] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.207130] mice: PS/2 mouse device common for all mice
[ 1.207401] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.207444] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.207593] device-mapper: uevent: version 1.0.3
[ 1.207730] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.207876] device-mapper: multipath: version 1.1.0 loaded
[ 1.207880] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.208062] EISA: Probing bus 0 at eisa.0
[ 1.208073] Cannot allocate resource for EISA slot 1
[ 1.208076] Cannot allocate resource for EISA slot 2
[ 1.208080] Cannot allocate resource for EISA slot 3
[ 1.208083] Cannot allocate resource for EISA slot 4
[ 1.208113] EISA: Detected 0 cards.
[ 1.208370] cpuidle: using governor ladder
[ 1.208515] cpuidle: using governor menu
[ 1.209296] TCP cubic registered
[ 1.209539] NET: Registered protocol family 10
[ 1.210242] lo: Disabled Privacy Extensions
[ 1.210790] NET: Registered protocol family 17
[ 1.210816] Bluetooth: L2CAP ver 2.13
[ 1.210818] Bluetooth: L2CAP socket layer initialized
[ 1.210823] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.210825] Bluetooth: SCO socket layer initialized
[ 1.210881] Bluetooth: RFCOMM TTY layer initialized
[ 1.210886] Bluetooth: RFCOMM socket layer initialized
[ 1.210889] Bluetooth: RFCOMM ver 1.11
[ 1.211666] Using IPI No-Shortcut mode
[ 1.211716] PM: Resume from disk failed.
[ 1.211725] registered taskstats version 1
[ 1.211804] Magic number: 6:464:590
[ 1.211874] rtc_cmos 00:07: setting system clock to 2010-04-10 16:34:32 UTC (1270917272)
[ 1.211876] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.211878] EDD information not available.
[ 1.230063] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.328767] ata1.00: ATA-8: Hitachi HTS542525K9A300, BBFOC3EP, max UDMA/133
[ 1.328770] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.336674] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L632H, SC04, max UDMA/33
[ 1.344625] ata1.00: configured for UDMA/133
[ 1.344713] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[ 1.344803] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.344832] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.344869] sd 0:0:0:0: [sda] Write Protect is off
[ 1.344871] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.344890] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.344985] sda:
[ 1.352291] ata2.00: configured for UDMA/33
[ 1.358038] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632H SC04 PQ: 0 ANSI: 5
[ 1.359081] sda1 sda2 sda3 <sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.373479] Uniform CD-ROM driver Revision: 3.20
[ 1.373537] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.373569] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.381340] sda5 sda6 sda7 sda8 >
[ 1.419981] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.420022] Freeing unused kernel memory: 540k freed
[ 1.420312] Write protecting the kernel text: 4580k
[ 1.420355] Write protecting the kernel read-only data: 1840k
[ 1.496052] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.511272] Linux agpgart interface v0.103
[ 1.646332] sky2 driver version 1.23
[ 1.646416] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.646471] sky2 0000:02:00.0: setting latency timer to 64
[ 1.646554] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3
[ 1.647147] alloc irq_desc for 28 on node -1
[ 1.647148] alloc kstat_irqs on node -1
[ 1.647217] sky2 0000:02:00.0: irq 28 for MSI/MSI-X
[ 1.648130] sky2 eth0: addr 00:13:77:66:c5:23
[ 1.685603] ACPI: Cant attach device
[ 1.687649] acpi device:05: registered as cooling_device3
[ 1.687763] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input6
[ 1.687798] ACPI: Video Device [NVID] (multi-head: yes rom: no post: no)
[ 1.758830] usb 1-1: configuration #1 chosen from 1 choice
[ 2.168058] usb 5-2: new low speed USB device using uhci_hcd and address 2
[ 2.415316] usb 5-2: configuration #1 chosen from 1 choice
[ 2.433073] usbcore: registered new interface driver hiddev
[ 2.447468] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input7
[ 2.447528] generic-usb 0003:045E:00A4.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 2.447539] usbcore: registered new interface driver usbhid
[ 2.447541] usbhid: v2.6:USB HID core driver
[ 2.664044] usb 7-2: new full speed USB device using uhci_hcd and address 2
[ 2.915026] usb 7-2: configuration #1 chosen from 1 choice
[ 3.085308] xor: automatically using best checksumming function: pIII_sse
[ 3.105014] pIII_sse : 8880.000 MB/sec
[ 3.105016] xor: using function: pIII_sse (8880.000 MB/sec)
[ 3.106990] device-mapper: dm-raid45: initialized v0.2594b
[ 3.454719] PM: Starting manual resume from disk
[ 3.454723] PM: Resume from partition 8:8
[ 3.454725] PM: Checking hibernation image.
[ 3.476144] PM: Resume from disk failed.
[ 3.498732] EXT4-fs (sda5): barriers enabled
[ 3.519708] kjournald2 starting: pid 415, dev sda5:8, commit interval 5 seconds
[ 3.519790] EXT4-fs (sda5): delayed allocation enabled
[ 3.519793] EXT4-fs: file extents enabled
[ 3.521830] EXT4-fs: mballoc enabled
[ 3.521842] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 4.275790] type=1505 audit(1270917275.560:2): operation="profile_load" pid=440 name=/usr/share/gdm/guest-session/Xsession
[ 4.281867] type=1505 audit(1270917275.568:3): operation="profile_load" pid=441 name=/sbin/dhclient3
[ 4.282469] type=1505 audit(1270917275.568:4): operation="profile_load" pid=441 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 4.282795] type=1505 audit(1270917275.568:5): operation="profile_load" pid=441 name=/usr/lib/connman/scripts/dhclient-script
[ 4.337688] type=1505 audit(1270917275.624:6): operation="profile_load" pid=442 name=/usr/bin/evince
[ 4.347354] type=1505 audit(1270917275.633:7): operation="profile_load" pid=442 name=/usr/bin/evince-previewer
[ 4.353084] type=1505 audit(1270917275.641:8): operation="profile_load" pid=442 name=/usr/bin/evince-thumbnailer
[ 4.388949] type=1505 audit(1270917275.673:9): operation="profile_load" pid=444 name=/usr/bin/freshclam
[ 19.600967] udev: starting version 147
[ 19.636522] Adding 2731008k swap on /dev/sda8. Priority:-1 extents:1 across:2731008k
[ 19.712832] [drm] Initialized drm 1.1.0 20060810
[ 19.720560] cfg80211: Calling CRDA to update world regulatory domain
[ 19.726738] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 19.726745] pci 0000:01:00.0: setting latency timer to 64
[ 19.728203] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086500a2)
[ 19.728796] [drm] Initialized nouveau 0.0.15 v2.6.31-rc6-539-ged53f9fcabd42f004 for 0000:01:00.0 on minor 0
[ 19.748643] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 19.748745] usbcore: registered new interface driver btusb
[ 19.771206] lp: driver loaded but no devices found
[ 19.828848] cfg80211: World regulatory domain updated:
[ 19.828852] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 19.828854] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.828857] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.828859] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.828861] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.828863] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.843412] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 19.843414] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 19.843530] iwl3945 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 19.843544] iwl3945 0000:04:00.0: setting latency timer to 64
[ 19.863421] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 19.867541] Linux video capture interface: v2.00
[ 19.870474] uvcvideo: Found UVC 1.00 device Vega USB 2.0 Camera. (0ac8:c302)
[ 19.880422] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 19.880643] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 19.880645] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 19.880647] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 19.899003] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 19.932552] EXT4-fs (sda5): internal journal on sda5:8
[ 19.935805] iwl3945 0000:04:00.0: Tunable channels: 11 802.11bg, 0 802.11a channels
[ 19.935809] iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945BG
[ 19.935926] alloc irq_desc for 29 on node -1
[ 19.935928] alloc kstat_irqs on node -1
[ 19.935960] iwl3945 0000:04:00.0: irq 29 for MSI/MSI-X
[ 19.936557] input: Vega USB 2.0 Camera. as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input8
[ 19.936604] usbcore: registered new interface driver uvcvideo
[ 19.936606] USB Video Class driver (v0.1.0)
[ 19.977797] alloc irq_desc for 22 on node -1
[ 19.977800] alloc kstat_irqs on node -1
[ 19.977806] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 19.977838] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 19.985464] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 20.048361] hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
[ 20.048423] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 20.472070] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04713/0x200000
[ 20.508218] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[ 21.699288] EXT4-fs (sda6): barriers enabled
[ 21.701945] kjournald2 starting: pid 1171, dev sda6:8, commit interval 5 seconds
[ 21.702256] EXT4-fs (sda6): internal journal on sda6:8
[ 21.702259] EXT4-fs (sda6): delayed allocation enabled
[ 21.702262] EXT4-fs: file extents enabled
[ 21.702366] EXT4-fs: mballoc enabled
[ 21.702378] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 21.834532] sky2 eth0: enabling interface
[ 21.834728] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.837369] iwl3945 0000:04:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 21.851990] iwl3945 0000:04:00.0: loaded firmware version 15.32.2.9
[ 21.870711] __ratelimit: 12 callbacks suppressed
[ 21.870714] type=1505 audit(1270910093.157:14): operation="profile_replace" pid=1318 name=/usr/share/gdm/guest-session/Xsession
[ 21.872122] type=1505 audit(1270910093.157:15): operation="profile_replace" pid=1319 name=/sbin/dhclient3
[ 21.872723] type=1505 audit(1270910093.157:16): operation="profile_replace" pid=1319 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 21.873050] type=1505 audit(1270910093.161:17): operation="profile_replace" pid=1319 name=/usr/lib/connman/scripts/dhclient-script
[ 21.876285] type=1505 audit(1270910093.161:18): operation="profile_replace" pid=1320 name=/usr/bin/evince
[ 21.886072] type=1505 audit(1270910093.173:19): operation="profile_replace" pid=1320 name=/usr/bin/evince-previewer
[ 21.892919] type=1505 audit(1270910093.177:20): operation="profile_replace" pid=1320 name=/usr/bin/evince-thumbnailer
[ 21.900831] type=1505 audit(1270910093.185:21): operation="profile_replace" pid=1322 name=/usr/bin/freshclam
[ 21.902461] type=1505 audit(1270910093.189:22): operation="profile_replace" pid=1323 name=/usr/lib/cups/backend/cups-pdf
[ 21.903165] type=1505 audit(1270910093.189:23): operation="profile_replace" pid=1323 name=/usr/sbin/cupsd
[ 21.930376] Registered led device: iwl-phy0::radio
[ 21.930393] Registered led device: iwl-phy0::assoc
[ 21.930407] Registered led device: iwl-phy0::RX
[ 21.930419] Registered led device: iwl-phy0::TX
[ 21.992334] ADDRCONF(NETDEV_UP): wlan0: link is not ready
ettore@ettore-laptop:~$
ettore@ettore-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8600M GS] (rev a1)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 13)
04:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
ettore@ettore-laptop:~$ uname -a
Linux ettore-laptop 2.6.31-20-generic #58-Ubuntu SMP Fri Mar 12 05:23:09 UTC 2010 i686 GNU/Linux
ettore@ettore-laptop:~$
Ultima modifica di Anonymous il sabato 10 aprile 2010, 17:14, modificato 1 volta in totale.
- Alka-Seltzer PLUS
- Rampante Reduce

- Messaggi: 8887
- Iscrizione: venerdì 18 settembre 2009, 13:29
- Desktop: Unity + Gnome flashback
- Distribuzione: Ubuntu 16.04 & 14.04 64bit
Re: [Install] Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco
ma come ??? La calma innanzitutto:stai dicendo che non va più la grafica ? Ah... ma tanto non andava neanche primalupo59 ha scritto: fatto, ha poi installato un pò di aggiornamenti ma ora dopo il login non vapiù , appare in alto a sx un quadrato bianco con angelo@angelo - nevada e chiede un comando.... Quale ??? perchè non va più ??? aiutoooooooooooooo
Beh allora prova, una volta che sei su "angelo@angelo" a scrivere questa sequenza di comandi rispettando maiuscole e minuscole:
Codice: Seleziona tutto
sudo cp /etc/X11/xorg.conf /etc/X11/xorg.bakCodice: Seleziona tutto
sudo X -configureCodice: Seleziona tutto
sudo cp xorg.conf.new /etc/X11/xorg.confCodice: Seleziona tutto
sudo rebootPS: ti chiederà la tua password e non ti farà vedere cosa digiti mentre la scrivi: tu scrivila alla cieca e premi invio ok ?
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
[Install] Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco
ok ma non esegue il primo comando dice : impossibile eseguire stat di /etc/x11/xorg.bak nessun file o directory
che faccio ???
che faccio ???
- Alka-Seltzer PLUS
- Rampante Reduce

- Messaggi: 8887
- Iscrizione: venerdì 18 settembre 2009, 13:29
- Desktop: Unity + Gnome flashback
- Distribuzione: Ubuntu 16.04 & 14.04 64bit
Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco
Allora parti dal secondo !
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
[Install] Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco
fatto. esce il messaggio :fatal server error : server is already active for display 0 remove /temp/.x0-lock
sono poi riuscito ad accedere con sessione GNOME ma , come al solito dopo un pò lo schermo diventa bianco e... amen!!
sono poi riuscito ad accedere con sessione GNOME ma , come al solito dopo un pò lo schermo diventa bianco e... amen!!
- Alka-Seltzer PLUS
- Rampante Reduce

- Messaggi: 8887
- Iscrizione: venerdì 18 settembre 2009, 13:29
- Desktop: Unity + Gnome flashback
- Distribuzione: Ubuntu 16.04 & 14.04 64bit
Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco
Mi sono dimenticato un comando:
questo lo devi dare all'inizio !
Poi, come da citazione:
Codice: Seleziona tutto
sudo /etc/init.d/gdm stopPoi, come da citazione:
<- riconfigura la graficaCodice: Seleziona tutto
sudo X -configure
<- copia il nuovo file di configurazione della graficaCodice: Seleziona tutto
sudo cp xorg.conf.new /etc/X11/xorg.conf
<- riavviaCodice: Seleziona tutto
sudo reboot
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
[Install] Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco
niente , torno sempre a : impossibile eseguire stat ................. nessun file o directory :'(
- Alka-Seltzer PLUS
- Rampante Reduce

- Messaggi: 8887
- Iscrizione: venerdì 18 settembre 2009, 13:29
- Desktop: Unity + Gnome flashback
- Distribuzione: Ubuntu 16.04 & 14.04 64bit
Re: [Install] Installato ubuntu si avvia e poi dopo poco schermo bianco
ma ... come ??? Mannaggia ... mandami un messaggio privato ci rilavoriamo su in settimana 
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 6 ospiti