flytv prime 30

Riconoscimento, installazione e configurazione delle periferiche.
Immagine Hardware e driver Immagine Amministrazione del sistema • Dispositivi e partizioni • Driver video • Log di sistema • Pagina hardware • Periferiche senza fili • Stampanti e scanner
Scrivi risposta
ohmmiunque
Prode Principiante
Messaggi: 50
Iscrizione: mercoledì 28 dicembre 2005, 10:08

flytv prime 30

Messaggio da ohmmiunque »

Ciao a tutti ragazzi, premetto di aver letto le informazioni date agli altri sulla mia stessa problematica, senza pero, aver trovato soluzione.

IO ho installato la scheda tv flytv prime 30 e ora sono riuscito a vedere finalmente il video ma il suono non va.

In kmix ho anche i controller del driver saa714 mi pare e sono tutti a volume elevato ma il suono continua a non sentirsi.

HO anche provato a disinstallarlo e reinstallarlo cambiando il tuner 26 come il ragazzo che ha la mia stessa scheda solo che ogni volta che provo a levarlo e rimetterlo mi dice che il driver è in uso e non posso toccare nulla....

qualcuno potrebbe darmi una mano?
Ritorna su
Avatar utente
Devnull
Rampante Reduce
Rampante Reduce
Messaggi: 8158
Iscrizione: lunedì 21 novembre 2005, 15:56
Località: Ancona

Re: flytv prime 30

Messaggio da Devnull »

ohmmiunque ha scritto: Ciao a tutti ragazzi, premetto di aver letto le informazioni date agli altri sulla mia stessa problematica, senza pero, aver trovato soluzione.

IO ho installato la scheda tv flytv prime 30 e ora sono riuscito a vedere finalmente il video ma il suono non va.

In kmix ho anche i controller del driver saa714 mi pare e sono tutti a volume elevato ma il suono continua a non sentirsi.

HO anche provato a disinstallarlo e reinstallarlo cambiando il tuner 26 come il ragazzo che ha la mia stessa scheda solo che ogni volta che provo a levarlo e rimetterlo mi dice che il driver è in uso e non posso toccare nulla....

qualcuno potrebbe darmi una mano?
Si infatti mi ha dato lo stesso problema .Scommetto che usi la dapper  ;D.
Ecco come puoi installare la scheda.
All'avvio entra nella recovery mode  dai il comando

Codice: Seleziona tutto

 modconf
e vai su  kernel/drivers/media/video/saa713.     
disinstalla il driver e reistallalo con l'opzione tuner=26 .riavvia il sistema e accertati che i canali di ingresso e di uscita della scheda audio siano attivi e non con il volume al minimo.
Ciao.  ;)
Da regolamento (Sez. I punto 15) è vietato inviare messaggi privati per richieste di supporto tecnico, si prega di aprire una discussione nella giusta sezione.
Hai domande sul forum? Leggi le FAQ e il Regolamento.
→ → → → Partecipa alla documentazione ← ← ← ←
Ritorna su
ohmmiunque
Prode Principiante
Messaggi: 50
Iscrizione: mercoledì 28 dicembre 2005, 10:08

Re: flytv prime 30

Messaggio da ohmmiunque »

Devnull ha scritto:
ohmmiunque ha scritto: Ciao a tutti ragazzi, premetto di aver letto le informazioni date agli altri sulla mia stessa problematica, senza pero, aver trovato soluzione.

IO ho installato la scheda tv flytv prime 30 e ora sono riuscito a vedere finalmente il video ma il suono non va.

In kmix ho anche i controller del driver saa714 mi pare e sono tutti a volume elevato ma il suono continua a non sentirsi.

HO anche provato a disinstallarlo e reinstallarlo cambiando il tuner 26 come il ragazzo che ha la mia stessa scheda solo che ogni volta che provo a levarlo e rimetterlo mi dice che il driver è in uso e non posso toccare nulla....

qualcuno potrebbe darmi una mano?
Si infatti mi ha dato lo stesso problema .Scommetto che usi la dapper  ;D.
Ecco come puoi installare la scheda.
All'avvio entra nella recovery mode  dai il comando

Codice: Seleziona tutto

 modconf
e vai su  kernel/drivers/media/video/saa713.     
disinstalla il driver e reistallalo con l'opzione tuner=26 .riavvia il sistema e accertati che i canali di ingresso e di uscita della scheda audio siano attivi e non con il volume al minimo.
Ciao.  ;)

ciao grazie per esserti interessato al mio problema.... IO provo con modconf a disinstallarlo ma mi dice che è in uso!
e non me lo fa levare????
devo staccare l'antenna dalla scheda e riprovare o in che modo posso liberarlo?
Ritorna su
Avatar utente
Devnull
Rampante Reduce
Rampante Reduce
Messaggi: 8158
Iscrizione: lunedì 21 novembre 2005, 15:56
Località: Ancona

Re: flytv prime 30

Messaggio da Devnull »

ti dà lo stesso problema utilizzando la recovery mode ?
mi sembra strano...
Da regolamento (Sez. I punto 15) è vietato inviare messaggi privati per richieste di supporto tecnico, si prega di aprire una discussione nella giusta sezione.
Hai domande sul forum? Leggi le FAQ e il Regolamento.
→ → → → Partecipa alla documentazione ← ← ← ←
Ritorna su
ohmmiunque
Prode Principiante
Messaggi: 50
Iscrizione: mercoledì 28 dicembre 2005, 10:08

Re: flytv prime 30

Messaggio da ohmmiunque »

Devnull ha scritto: ti dà lo stesso problema utilizzando la recovery mode ?
mi sembra strano...
e si mi da la stessa cosa.

Ora per di più credo di aver fatto una fesseria, sono andato come root all'interno della cartella dove erano caricati i moduli e ho cancellato il modulo saa7134 pensando di poterlo reinstallare. Ora nel modconf non mi da piu il semplice modulo saa7134 ma gli altri 5......


RIsultato vedo le immagini con una perfezione da invidia ma il suono non c'è :P sto rosicando allegramente :)

sai cosa posso fare??p
Ritorna su
ohmmiunque
Prode Principiante
Messaggi: 50
Iscrizione: mercoledì 28 dicembre 2005, 10:08

Re: flytv prime 30

Messaggio da ohmmiunque »

ohmmiunque ha scritto:
Devnull ha scritto: ti dà lo stesso problema utilizzando la recovery mode ?
mi sembra strano...
e si mi da la stessa cosa.

Ora per di più credo di aver fatto una fesseria, sono andato come root all'interno della cartella dove erano caricati i moduli e ho cancellato il modulo saa7134 pensando di poterlo reinstallare. Ora nel modconf non mi da piu il semplice modulo saa7134 ma gli altri 5......


RIsultato vedo le immagini con una perfezione da invidia ma il suono non c'è :P sto rosicando allegramente :)

sai cosa posso fare??p

Ora se faccio il comando dmseg esce fuori questo, credo di avere qualche impiccio con il modulo saa7134....
dmesg

Codice: Seleziona tutto

[17179569.184000] Linux version 2.6.15-27-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Sat Sep 16 01:51:59 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000002fffc000 (usable)
[17179569.184000]  BIOS-e820: 000000002fffc000 - 000000002ffff000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000002ffff000 - 0000000030000000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 767MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 196604
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 192508 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ASUS                                  ) @ 0x000f5e20
[17179569.184000] ACPI: RSDT (v001 ASUS   A7V8X-X  0x42302e31 MSFT 0x31313031) @ 0x2fffc000
[17179569.184000] ACPI: FADT (v001 ASUS   A7V8X-X  0x42302e31 MSFT 0x31313031) @ 0x2fffc0b2
[17179569.184000] ACPI: BOOT (v001 ASUS   A7V8X-X  0x42302e31 MSFT 0x31313031) @ 0x2fffc030
[17179569.184000] ACPI: MADT (v001 ASUS   A7V8X-X  0x42302e31 MSFT 0x31313031) @ 0x2fffc058
[17179569.184000] ACPI: DSDT (v001   ASUS A7V8X-X  0x00001000 MSFT 0x0100000b) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0xe408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:10 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hdb1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 1988.640 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179572.936000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179572.936000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179572.960000] Memory: 769460k/786416k available (1976k kernel code, 16296k reserved, 606k data, 288k init, 0k highmem)
[17179572.960000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179573.040000] Calibrating delay using timer specific routine.. 3980.55 BogoMIPS (lpj=7961110)
[17179573.040000] Security Framework v1.0.0 initialized
[17179573.040000] SELinux:  Disabled at boot.
[17179573.040000] Mount-cache hash table entries: 512
[17179573.040000] CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
[17179573.040000] CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
[17179573.040000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179573.040000] CPU: L2 Cache: 256K (64 bytes/line)
[17179573.040000] CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000
[17179573.040000] mtrr: v2.0 (20020519)
[17179573.040000] CPU: AMD Sempron(TM) 2800+ stepping 00
[17179573.040000] Enabling fast FPU save and restore... done.
[17179573.040000] Enabling unmasked SIMD FPU exception support... done.
[17179573.040000] Checking 'hlt' instruction... OK.
[17179573.056000] checking if image is initramfs... it is
[17179573.536000] Freeing initrd memory: 6024k freed
[17179573.544000] ACPI: Looking for DSDT ... not found!
[17179573.552000] ENABLING IO-APIC IRQs
[17179573.552000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179573.696000] NET: Registered protocol family 16
[17179573.696000] EISA bus registered
[17179573.696000] ACPI: bus type pci registered
[17179573.696000] PCI: PCI BIOS revision 2.10 entry at 0xf1960, last bus=1
[17179573.696000] PCI: Using configuration type 1
[17179573.696000] ACPI: Subsystem revision 20051216
[17179573.700000] ACPI: Interpreter enabled
[17179573.700000] ACPI: Using IOAPIC for interrupt routing
[17179573.700000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
[17179573.700000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[17179573.700000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[17179573.700000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[17179573.700000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12)
[17179573.700000] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12)
[17179573.700000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179573.700000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.700000] PCI: Probing PCI hardware (bus 00)
[17179573.704000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179573.704000] PCI quirk: region e400-e47f claimed by vt8235 PM
[17179573.704000] PCI quirk: region e800-e80f claimed by vt8235 SMB
[17179573.704000] Boot video device is 0000:01:00.0
[17179573.704000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.708000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[17179573.716000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.716000] pnp: PnP ACPI init
[17179573.720000] pnp: PnP ACPI: found 14 devices
[17179573.720000] PnPBIOS: Disabled by ACPI PNP
[17179573.720000] PCI: Using ACPI for IRQ routing
[17179573.720000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179573.724000] pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved
[17179573.724000] pnp: 00:01: ioport range 0xe800-0xe81f could not be reserved
[17179573.724000] pnp: 00:0d: ioport range 0x290-0x297 has been reserved
[17179573.724000] pnp: 00:0d: ioport range 0x370-0x375 has been reserved
[17179573.724000] PCI: Bridge: 0000:00:01.0
[17179573.724000]   IO window: d000-dfff
[17179573.724000]   MEM window: df000000-dfffffff
[17179573.724000]   PREFETCH window: e0000000-f7ffffff
[17179573.724000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179573.724000] Simple Boot Flag at 0x3a set to 0x1
[17179573.724000] audit: initializing netlink socket (disabled)
[17179573.724000] audit(1159786236.724:1): initialized
[17179573.724000] VFS: Disk quotas dquot_6.5.1
[17179573.724000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.724000] Initializing Cryptographic API
[17179573.724000] io scheduler noop registered
[17179573.724000] io scheduler anticipatory registered
[17179573.724000] io scheduler deadline registered
[17179573.724000] io scheduler cfq registered
[17179573.724000] isapnp: Scanning for PnP cards...
[17179574.080000] isapnp: No Plug & Play device found
[17179574.092000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[17179574.092000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179574.092000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179574.092000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179574.092000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179574.096000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179574.096000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179574.096000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179574.096000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179574.096000] mice: PS/2 mouse device common for all mice
[17179574.096000] EISA: Probing bus 0 at eisa.0
[17179574.096000] EISA: Detected 0 cards.
[17179574.096000] NET: Registered protocol family 2
[17179574.128000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.132000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179574.132000] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[17179574.132000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179574.132000] TCP: Hash tables configured (established 131072 bind 65536)
[17179574.132000] TCP reno registered
[17179574.132000] TCP bic registered
[17179574.132000] NET: Registered protocol family 1
[17179574.132000] NET: Registered protocol family 8
[17179574.132000] NET: Registered protocol family 20
[17179574.132000] Using IPI Shortcut mode
[17179574.132000] ACPI wakeup devices:
[17179574.132000] PCI0 PCI1 USB0 USB1 USB2 SU20 SLAN
[17179574.132000] ACPI: (supports S0 S1 S4 S5)
[17179574.132000] Freeing unused kernel memory: 288k freed
[17179574.180000] vga16fb: initializing
[17179574.180000] vga16fb: mapped to 0xc00a0000
[17179574.272000] Console: switching to colour frame buffer device 80x25
[17179574.272000] fb0: VGA16 VGA frame buffer device
[17179575.396000] Capability LSM initialized
[17179576.020000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[17179576.020000] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
[17179576.020000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
[17179576.020000] VP_IDE: chipset revision 6
[17179576.020000] VP_IDE: not 100% native mode: will probe irqs later
[17179576.020000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[17179576.020000]     ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:DMA
[17179576.020000]     ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:pio, hdd:DMA
[17179576.020000] Probing IDE interface ide0...
[17179576.440000] hda: Maxtor 6Y080L0, ATA DISK drive
[17179576.720000] hdb: Maxtor 6B160P0, ATA DISK drive
[17179576.776000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.800000] Probing IDE interface ide1...
[17179611.596000] ide1: Wait for ready failed before probe !
[17179617.044000] hdc: IRQ probe failed (0xffffbdfc)
[17179622.268000] hdc: IRQ probe failed (0xffffbdfc)
[17179622.268000] hdc: no response (status = 0x80), resetting drive
[17179657.620000] hdc: IRQ probe failed (0xffffbdfc)
[17179657.620000] hdc: no response (status = 0x80)
[17179658.532000] hdd: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
[17179658.588000] ide1 at 0x170-0x177,0x376 on irq 15
[17179658.596000] hda: max request size: 128KiB
[17179658.612000] hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[17179658.612000] hda: cache flushes supported
[17179658.612000]  hda: hda1 hda2 < hda5 >
[17179658.632000] hdb: max request size: 1024KiB
[17179658.636000] hdb: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(133)
[17179658.636000] hdb: cache flushes supported
[17179658.636000]  hdb: hdb1 hdb2 < hdb5 >
[17179658.684000] hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179658.684000] Uniform CD-ROM driver Revision: 3.20
[17179660.088000] usbcore: registered new driver usbfs
[17179660.088000] usbcore: registered new driver hub
[17179660.088000] USB Universal Host Controller Interface driver v2.3
[17179660.088000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 169
[17179660.088000] PCI: Via IRQ fixup for 0000:00:10.0, from 0 to 9
[17179660.088000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179660.092000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179660.092000] uhci_hcd 0000:00:10.0: irq 169, io base 0x0000b800
[17179660.092000] hub 1-0:1.0: USB hub found
[17179660.092000] hub 1-0:1.0: 2 ports detected
[17179660.196000] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 169
[17179660.196000] PCI: Via IRQ fixup for 0000:00:10.1, from 0 to 9
[17179660.196000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179660.196000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179660.196000] uhci_hcd 0000:00:10.1: irq 169, io base 0x0000b400
[17179660.196000] hub 2-0:1.0: USB hub found
[17179660.196000] hub 2-0:1.0: 2 ports detected
[17179660.300000] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 169
[17179660.300000] PCI: Via IRQ fixup for 0000:00:10.2, from 0 to 9
[17179660.300000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179660.300000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179660.300000] uhci_hcd 0000:00:10.2: irq 169, io base 0x0000b000
[17179660.300000] hub 3-0:1.0: USB hub found
[17179660.300000] hub 3-0:1.0: 2 ports detected
[17179660.404000] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 169
[17179660.404000] PCI: Via IRQ fixup for 0000:00:10.3, from 0 to 9
[17179660.404000] ehci_hcd 0000:00:10.3: EHCI Host Controller
[17179660.404000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179660.404000] ehci_hcd 0000:00:10.3: irq 169, io mem 0xde000000
[17179660.404000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179660.404000] hub 4-0:1.0: USB hub found
[17179660.404000] hub 4-0:1.0: 6 ports detected
[17179660.588000] Attempting manual resume
[17179660.608000] kjournald starting.  Commit interval 5 seconds
[17179660.608000] EXT3-fs: mounted filesystem with ordered data mode.
[17179669.900000] Linux agpgart interface v0.101 (c) Dave Jones
[17179669.904000] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[17179669.908000] agpgart: AGP aperture is 64M @ 0xf8000000
[17179670.196000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179670.204000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179670.224000] irda_init()
[17179670.224000] NET: Registered protocol family 23
[17179670.344000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179670.344000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 177
[17179670.344000] PCI: Via IRQ fixup for 0000:00:12.0, from 0 to 1
[17179670.344000] eth0: VIA Rhine II at 0x1a400, 00:11:2f:ab:87:db, IRQ 177.
[17179670.344000] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 0020.
[17179670.672000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 185
[17179670.672000] PCI: Via IRQ fixup for 0000:00:11.5, from 0 to 9
[17179670.676000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179670.868000] Real Time Clock Driver v1.12
[17179670.872000] input: PC Speaker as /class/input/input1
[17179671.028000] Floppy drive(s): fd0 is 1.44M
[17179671.076000] FDC 0 is a post-1991 82077
[17179671.084000] parport: PnPBIOS parport detected.
[17179671.084000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179671.096000] parport0: Printer, hp deskjet 5550
[17179671.148000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[17179671.192000] codec_read: codec 0 is not valid [0x107e5370]
[17179671.200000] codec_read: codec 0 is not valid [0x107e5370]
[17179671.204000] codec_read: codec 0 is not valid [0x107e5370]
[17179671.212000] codec_read: codec 0 is not valid [0x107e5370]
[17179671.728000] ts: Compaq touchscreen protocol output
[17179671.736000] eth0: link up, 10Mbps, half-duplex, lpa 0x0020
[17179672.776000] NET: Registered protocol family 17
[17179673.208000] lp0: using parport0 (interrupt-driven).
[17179673.260000] Linux video capture interface: v1.00
[17179673.292000] bttv: driver version 0.9.16 loaded
[17179673.292000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[17179673.396000] saa7134_dvb: Unknown symbol saa7134_ts_register
[17179673.396000] saa7134_dvb: Unknown symbol saa7134_ts_qops
[17179673.396000] saa7134_dvb: Unknown symbol saa7134_i2c_call_clients
[17179673.396000] saa7134_dvb: Unknown symbol saa7134_ts_unregister
[17179673.408000] saa7134_empress: Unknown symbol saa7134_devlist
[17179673.408000] saa7134_empress: Unknown symbol saa7134_common_ioctl
[17179673.408000] saa7134_empress: Unknown symbol saa7134_boards
[17179673.408000] saa7134_empress: Unknown symbol saa7134_ts_register
[17179673.408000] saa7134_empress: Unknown symbol saa7134_print_ioctl
[17179673.408000] saa7134_empress: Unknown symbol saa7134_ts_qops
[17179673.408000] saa7134_empress: Unknown symbol saa7134_i2c_call_clients
[17179673.408000] saa7134_empress: Unknown symbol saa7134_ts_unregister
[17179673.456000] Adding 2265124k swap on /dev/hdb5.  Priority:-1 extents:1 across:2265124k
[17179673.604000] EXT3 FS on hdb1, internal journal
[17179673.772000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179673.772000] md: bitmap version 4.39
[17179674.680000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179676.556000] NET: Registered protocol family 10
[17179676.556000] lo: Disabled Privacy Extensions
[17179676.556000] IPv6 over IPv4 tunneling driver
[17179681.876000] ACPI: Power Button (FF) [PWRF]
[17179681.876000] ACPI: Power Button (CM) [PWRB]
[17179681.984000] ibm_acpi: ec object not found
[17179682.016000] pcc_acpi: loading...
[17179686.868000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[17179686.872000] [fglrx] Maximum main memory to use for locked dma buffers: 680 MBytes.
[17179686.872000] [fglrx] module loaded - fglrx 8.28.8 [Aug 17 2006] on minor 0
[17179686.920000] eth0: no IPv6 routers present
[17179687.188000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
[17179689.560000] [fglrx] Internal AGP support requested, but kernel AGP support active.
[17179689.560000] [fglrx] Have to use kernel AGP support to avoid conflicts.
[17179689.560000] [fglrx] AGP detected, AgpState   = 0x1f000a0b (hardware caps of chipset)
[17179689.560000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17179689.560000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17179689.560000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17179689.560000] [fglrx] AGP enabled,  AgpCommand = 0x1f000302 (selected caps)
[17179689.572000] [fglrx] total      GART = 67108864
[17179689.572000] [fglrx] free       GART = 51113984
[17179689.572000] [fglrx] max single GART = 51113984
[17179689.572000] [fglrx] total      LFB  = 127733760
[17179689.572000] [fglrx] free       LFB  = 118927360
[17179689.572000] [fglrx] max single LFB  = 118927360
[17179689.572000] [fglrx] total      Inv  = 0
[17179689.572000] [fglrx] free       Inv  = 0
[17179689.576000] [fglrx] max single Inv  = 0
[17179689.576000] [fglrx] total      TIM  = 0
[17179689.888000] ppdev: user-space parallel port driver
[17179690.476000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179690.476000] apm: overridden by ACPI.
[17179699.844000] Bluetooth: Core ver 2.8
[17179699.844000] NET: Registered protocol family 31
[17179699.844000] Bluetooth: HCI device and connection manager initialized
[17179699.844000] Bluetooth: HCI socket layer initialized
[17179699.876000] Bluetooth: L2CAP ver 2.8
[17179699.876000] Bluetooth: L2CAP socket layer initialized
[17179699.904000] Bluetooth: RFCOMM socket layer initialized
[17179699.904000] Bluetooth: RFCOMM TTY layer initialized
[17179699.904000] Bluetooth: RFCOMM ver 1.7
[17179714.076000] eth0: no IPv6 routers present
[17180915.692000] saa7134_alsa: Unknown symbol saa_dsp_writel
[17180915.692000] saa7134_alsa: Unknown symbol saa7134_devlist
[17180915.692000] saa7134_alsa: Unknown symbol saa7134_pgtable_alloc
[17180915.692000] saa7134_alsa: Unknown symbol saa7134_pgtable_build
[17180915.692000] saa7134_alsa: Unknown symbol saa7134_pgtable_free
[17180915.692000] saa7134_alsa: Unknown symbol dmasound_exit
[17180915.692000] saa7134_alsa: Unknown symbol dmasound_init
[17180915.692000] saa7134_alsa: Unknown symbol saa7134_set_dmabits
[17180923.908000] saa7134_alsa: Unknown symbol saa_dsp_writel
[17180923.912000] saa7134_alsa: Unknown symbol saa7134_devlist
[17180923.912000] saa7134_alsa: Unknown symbol saa7134_pgtable_alloc
[17180923.912000] saa7134_alsa: Unknown symbol saa7134_pgtable_build
[17180923.912000] saa7134_alsa: Unknown symbol saa7134_pgtable_free
[17180923.912000] saa7134_alsa: Unknown symbol dmasound_exit
[17180923.912000] saa7134_alsa: Unknown symbol dmasound_init
[17180923.912000] saa7134_alsa: Unknown symbol saa7134_set_dmabits
Ritorna su
ohmmiunque
Prode Principiante
Messaggi: 50
Iscrizione: mercoledì 28 dicembre 2005, 10:08

Re: flytv prime 30

Messaggio da ohmmiunque »

ohmmiunque ha scritto:
ohmmiunque ha scritto:
Devnull ha scritto: ti dà lo stesso problema utilizzando la recovery mode ?
mi sembra strano...
e si mi da la stessa cosa.

Ora per di più credo di aver fatto una fesseria, sono andato come root all'interno della cartella dove erano caricati i moduli e ho cancellato il modulo saa7134 pensando di poterlo reinstallare. Ora nel modconf non mi da piu il semplice modulo saa7134 ma gli altri 5......


RIsultato vedo le immagini con una perfezione da invidia ma il suono non c'è :P sto rosicando allegramente :)

sai cosa posso fare??p

Ora se faccio il comando dmseg esce fuori questo, credo di avere qualche impiccio con il modulo saa7134....
dmesg

Codice: Seleziona tutto

[17179569.184000] Linux version 2.6.15-27-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Sat Sep 16 01:51:59 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000002fffc000 (usable)
[17179569.184000]  BIOS-e820: 000000002fffc000 - 000000002ffff000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000002ffff000 - 0000000030000000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 767MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 196604
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 192508 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ASUS                                  ) @ 0x000f5e20
[17179569.184000] ACPI: RSDT (v001 ASUS   A7V8X-X  0x42302e31 MSFT 0x31313031) @ 0x2fffc000
[17179569.184000] ACPI: FADT (v001 ASUS   A7V8X-X  0x42302e31 MSFT 0x31313031) @ 0x2fffc0b2
[17179569.184000] ACPI: BOOT (v001 ASUS   A7V8X-X  0x42302e31 MSFT 0x31313031) @ 0x2fffc030
[17179569.184000] ACPI: MADT (v001 ASUS   A7V8X-X  0x42302e31 MSFT 0x31313031) @ 0x2fffc058
[17179569.184000] ACPI: DSDT (v001   ASUS A7V8X-X  0x00001000 MSFT 0x0100000b) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0xe408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:10 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hdb1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 1988.640 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179572.936000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179572.936000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179572.960000] Memory: 769460k/786416k available (1976k kernel code, 16296k reserved, 606k data, 288k init, 0k highmem)
[17179572.960000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179573.040000] Calibrating delay using timer specific routine.. 3980.55 BogoMIPS (lpj=7961110)
[17179573.040000] Security Framework v1.0.0 initialized
[17179573.040000] SELinux:  Disabled at boot.
[17179573.040000] Mount-cache hash table entries: 512
[17179573.040000] CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
[17179573.040000] CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
[17179573.040000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179573.040000] CPU: L2 Cache: 256K (64 bytes/line)
[17179573.040000] CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000
[17179573.040000] mtrr: v2.0 (20020519)
[17179573.040000] CPU: AMD Sempron(TM) 2800+ stepping 00
[17179573.040000] Enabling fast FPU save and restore... done.
[17179573.040000] Enabling unmasked SIMD FPU exception support... done.
[17179573.040000] Checking 'hlt' instruction... OK.
[17179573.056000] checking if image is initramfs... it is
[17179573.536000] Freeing initrd memory: 6024k freed
[17179573.544000] ACPI: Looking for DSDT ... not found!
[17179573.552000] ENABLING IO-APIC IRQs
[17179573.552000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179573.696000] NET: Registered protocol family 16
[17179573.696000] EISA bus registered
[17179573.696000] ACPI: bus type pci registered
[17179573.696000] PCI: PCI BIOS revision 2.10 entry at 0xf1960, last bus=1
[17179573.696000] PCI: Using configuration type 1
[17179573.696000] ACPI: Subsystem revision 20051216
[17179573.700000] ACPI: Interpreter enabled
[17179573.700000] ACPI: Using IOAPIC for interrupt routing
[17179573.700000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
[17179573.700000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[17179573.700000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[17179573.700000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[17179573.700000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12)
[17179573.700000] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12)
[17179573.700000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179573.700000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.700000] PCI: Probing PCI hardware (bus 00)
[17179573.704000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179573.704000] PCI quirk: region e400-e47f claimed by vt8235 PM
[17179573.704000] PCI quirk: region e800-e80f claimed by vt8235 SMB
[17179573.704000] Boot video device is 0000:01:00.0
[17179573.704000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.708000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[17179573.716000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.716000] pnp: PnP ACPI init
[17179573.720000] pnp: PnP ACPI: found 14 devices
[17179573.720000] PnPBIOS: Disabled by ACPI PNP
[17179573.720000] PCI: Using ACPI for IRQ routing
[17179573.720000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179573.724000] pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved
[17179573.724000] pnp: 00:01: ioport range 0xe800-0xe81f could not be reserved
[17179573.724000] pnp: 00:0d: ioport range 0x290-0x297 has been reserved
[17179573.724000] pnp: 00:0d: ioport range 0x370-0x375 has been reserved
[17179573.724000] PCI: Bridge: 0000:00:01.0
[17179573.724000]   IO window: d000-dfff
[17179573.724000]   MEM window: df000000-dfffffff
[17179573.724000]   PREFETCH window: e0000000-f7ffffff
[17179573.724000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179573.724000] Simple Boot Flag at 0x3a set to 0x1
[17179573.724000] audit: initializing netlink socket (disabled)
[17179573.724000] audit(1159786236.724:1): initialized
[17179573.724000] VFS: Disk quotas dquot_6.5.1
[17179573.724000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.724000] Initializing Cryptographic API
[17179573.724000] io scheduler noop registered
[17179573.724000] io scheduler anticipatory registered
[17179573.724000] io scheduler deadline registered
[17179573.724000] io scheduler cfq registered
[17179573.724000] isapnp: Scanning for PnP cards...
[17179574.080000] isapnp: No Plug & Play device found
[17179574.092000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[17179574.092000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179574.092000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179574.092000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179574.092000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179574.096000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179574.096000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179574.096000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179574.096000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179574.096000] mice: PS/2 mouse device common for all mice
[17179574.096000] EISA: Probing bus 0 at eisa.0
[17179574.096000] EISA: Detected 0 cards.
[17179574.096000] NET: Registered protocol family 2
[17179574.128000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.132000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179574.132000] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[17179574.132000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179574.132000] TCP: Hash tables configured (established 131072 bind 65536)
[17179574.132000] TCP reno registered
[17179574.132000] TCP bic registered
[17179574.132000] NET: Registered protocol family 1
[17179574.132000] NET: Registered protocol family 8
[17179574.132000] NET: Registered protocol family 20
[17179574.132000] Using IPI Shortcut mode
[17179574.132000] ACPI wakeup devices:
[17179574.132000] PCI0 PCI1 USB0 USB1 USB2 SU20 SLAN
[17179574.132000] ACPI: (supports S0 S1 S4 S5)
[17179574.132000] Freeing unused kernel memory: 288k freed
[17179574.180000] vga16fb: initializing
[17179574.180000] vga16fb: mapped to 0xc00a0000
[17179574.272000] Console: switching to colour frame buffer device 80x25
[17179574.272000] fb0: VGA16 VGA frame buffer device
[17179575.396000] Capability LSM initialized
[17179576.020000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[17179576.020000] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
[17179576.020000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
[17179576.020000] VP_IDE: chipset revision 6
[17179576.020000] VP_IDE: not 100% native mode: will probe irqs later
[17179576.020000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[17179576.020000]     ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:DMA
[17179576.020000]     ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:pio, hdd:DMA
[17179576.020000] Probing IDE interface ide0...
[17179576.440000] hda: Maxtor 6Y080L0, ATA DISK drive
[17179576.720000] hdb: Maxtor 6B160P0, ATA DISK drive
[17179576.776000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.800000] Probing IDE interface ide1...
[17179611.596000] ide1: Wait for ready failed before probe !
[17179617.044000] hdc: IRQ probe failed (0xffffbdfc)
[17179622.268000] hdc: IRQ probe failed (0xffffbdfc)
[17179622.268000] hdc: no response (status = 0x80), resetting drive
[17179657.620000] hdc: IRQ probe failed (0xffffbdfc)
[17179657.620000] hdc: no response (status = 0x80)
[17179658.532000] hdd: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
[17179658.588000] ide1 at 0x170-0x177,0x376 on irq 15
[17179658.596000] hda: max request size: 128KiB
[17179658.612000] hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[17179658.612000] hda: cache flushes supported
[17179658.612000]  hda: hda1 hda2 < hda5 >
[17179658.632000] hdb: max request size: 1024KiB
[17179658.636000] hdb: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(133)
[17179658.636000] hdb: cache flushes supported
[17179658.636000]  hdb: hdb1 hdb2 < hdb5 >
[17179658.684000] hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179658.684000] Uniform CD-ROM driver Revision: 3.20
[17179660.088000] usbcore: registered new driver usbfs
[17179660.088000] usbcore: registered new driver hub
[17179660.088000] USB Universal Host Controller Interface driver v2.3
[17179660.088000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 169
[17179660.088000] PCI: Via IRQ fixup for 0000:00:10.0, from 0 to 9
[17179660.088000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179660.092000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179660.092000] uhci_hcd 0000:00:10.0: irq 169, io base 0x0000b800
[17179660.092000] hub 1-0:1.0: USB hub found
[17179660.092000] hub 1-0:1.0: 2 ports detected
[17179660.196000] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 169
[17179660.196000] PCI: Via IRQ fixup for 0000:00:10.1, from 0 to 9
[17179660.196000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179660.196000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179660.196000] uhci_hcd 0000:00:10.1: irq 169, io base 0x0000b400
[17179660.196000] hub 2-0:1.0: USB hub found
[17179660.196000] hub 2-0:1.0: 2 ports detected
[17179660.300000] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 169
[17179660.300000] PCI: Via IRQ fixup for 0000:00:10.2, from 0 to 9
[17179660.300000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179660.300000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179660.300000] uhci_hcd 0000:00:10.2: irq 169, io base 0x0000b000
[17179660.300000] hub 3-0:1.0: USB hub found
[17179660.300000] hub 3-0:1.0: 2 ports detected
[17179660.404000] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 169
[17179660.404000] PCI: Via IRQ fixup for 0000:00:10.3, from 0 to 9
[17179660.404000] ehci_hcd 0000:00:10.3: EHCI Host Controller
[17179660.404000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179660.404000] ehci_hcd 0000:00:10.3: irq 169, io mem 0xde000000
[17179660.404000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179660.404000] hub 4-0:1.0: USB hub found
[17179660.404000] hub 4-0:1.0: 6 ports detected
[17179660.588000] Attempting manual resume
[17179660.608000] kjournald starting.  Commit interval 5 seconds
[17179660.608000] EXT3-fs: mounted filesystem with ordered data mode.
[17179669.900000] Linux agpgart interface v0.101 (c) Dave Jones
[17179669.904000] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[17179669.908000] agpgart: AGP aperture is 64M @ 0xf8000000
[17179670.196000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179670.204000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179670.224000] irda_init()
[17179670.224000] NET: Registered protocol family 23
[17179670.344000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179670.344000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 177
[17179670.344000] PCI: Via IRQ fixup for 0000:00:12.0, from 0 to 1
[17179670.344000] eth0: VIA Rhine II at 0x1a400, 00:11:2f:ab:87:db, IRQ 177.
[17179670.344000] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 0020.
[17179670.672000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 185
[17179670.672000] PCI: Via IRQ fixup for 0000:00:11.5, from 0 to 9
[17179670.676000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179670.868000] Real Time Clock Driver v1.12
[17179670.872000] input: PC Speaker as /class/input/input1
[17179671.028000] Floppy drive(s): fd0 is 1.44M
[17179671.076000] FDC 0 is a post-1991 82077
[17179671.084000] parport: PnPBIOS parport detected.
[17179671.084000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179671.096000] parport0: Printer, hp deskjet 5550
[17179671.148000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[17179671.192000] codec_read: codec 0 is not valid [0x107e5370]
[17179671.200000] codec_read: codec 0 is not valid [0x107e5370]
[17179671.204000] codec_read: codec 0 is not valid [0x107e5370]
[17179671.212000] codec_read: codec 0 is not valid [0x107e5370]
[17179671.728000] ts: Compaq touchscreen protocol output
[17179671.736000] eth0: link up, 10Mbps, half-duplex, lpa 0x0020
[17179672.776000] NET: Registered protocol family 17
[17179673.208000] lp0: using parport0 (interrupt-driven).
[17179673.260000] Linux video capture interface: v1.00
[17179673.292000] bttv: driver version 0.9.16 loaded
[17179673.292000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[17179673.396000] saa7134_dvb: Unknown symbol saa7134_ts_register
[17179673.396000] saa7134_dvb: Unknown symbol saa7134_ts_qops
[17179673.396000] saa7134_dvb: Unknown symbol saa7134_i2c_call_clients
[17179673.396000] saa7134_dvb: Unknown symbol saa7134_ts_unregister
[17179673.408000] saa7134_empress: Unknown symbol saa7134_devlist
[17179673.408000] saa7134_empress: Unknown symbol saa7134_common_ioctl
[17179673.408000] saa7134_empress: Unknown symbol saa7134_boards
[17179673.408000] saa7134_empress: Unknown symbol saa7134_ts_register
[17179673.408000] saa7134_empress: Unknown symbol saa7134_print_ioctl
[17179673.408000] saa7134_empress: Unknown symbol saa7134_ts_qops
[17179673.408000] saa7134_empress: Unknown symbol saa7134_i2c_call_clients
[17179673.408000] saa7134_empress: Unknown symbol saa7134_ts_unregister
[17179673.456000] Adding 2265124k swap on /dev/hdb5.  Priority:-1 extents:1 across:2265124k
[17179673.604000] EXT3 FS on hdb1, internal journal
[17179673.772000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179673.772000] md: bitmap version 4.39
[17179674.680000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179676.556000] NET: Registered protocol family 10
[17179676.556000] lo: Disabled Privacy Extensions
[17179676.556000] IPv6 over IPv4 tunneling driver
[17179681.876000] ACPI: Power Button (FF) [PWRF]
[17179681.876000] ACPI: Power Button (CM) [PWRB]
[17179681.984000] ibm_acpi: ec object not found
[17179682.016000] pcc_acpi: loading...
[17179686.868000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[17179686.872000] [fglrx] Maximum main memory to use for locked dma buffers: 680 MBytes.
[17179686.872000] [fglrx] module loaded - fglrx 8.28.8 [Aug 17 2006] on minor 0
[17179686.920000] eth0: no IPv6 routers present
[17179687.188000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
[17179689.560000] [fglrx] Internal AGP support requested, but kernel AGP support active.
[17179689.560000] [fglrx] Have to use kernel AGP support to avoid conflicts.
[17179689.560000] [fglrx] AGP detected, AgpState   = 0x1f000a0b (hardware caps of chipset)
[17179689.560000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17179689.560000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17179689.560000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17179689.560000] [fglrx] AGP enabled,  AgpCommand = 0x1f000302 (selected caps)
[17179689.572000] [fglrx] total      GART = 67108864
[17179689.572000] [fglrx] free       GART = 51113984
[17179689.572000] [fglrx] max single GART = 51113984
[17179689.572000] [fglrx] total      LFB  = 127733760
[17179689.572000] [fglrx] free       LFB  = 118927360
[17179689.572000] [fglrx] max single LFB  = 118927360
[17179689.572000] [fglrx] total      Inv  = 0
[17179689.572000] [fglrx] free       Inv  = 0
[17179689.576000] [fglrx] max single Inv  = 0
[17179689.576000] [fglrx] total      TIM  = 0
[17179689.888000] ppdev: user-space parallel port driver
[17179690.476000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179690.476000] apm: overridden by ACPI.
[17179699.844000] Bluetooth: Core ver 2.8
[17179699.844000] NET: Registered protocol family 31
[17179699.844000] Bluetooth: HCI device and connection manager initialized
[17179699.844000] Bluetooth: HCI socket layer initialized
[17179699.876000] Bluetooth: L2CAP ver 2.8
[17179699.876000] Bluetooth: L2CAP socket layer initialized
[17179699.904000] Bluetooth: RFCOMM socket layer initialized
[17179699.904000] Bluetooth: RFCOMM TTY layer initialized
[17179699.904000] Bluetooth: RFCOMM ver 1.7
[17179714.076000] eth0: no IPv6 routers present
[17180915.692000] saa7134_alsa: Unknown symbol saa_dsp_writel
[17180915.692000] saa7134_alsa: Unknown symbol saa7134_devlist
[17180915.692000] saa7134_alsa: Unknown symbol saa7134_pgtable_alloc
[17180915.692000] saa7134_alsa: Unknown symbol saa7134_pgtable_build
[17180915.692000] saa7134_alsa: Unknown symbol saa7134_pgtable_free
[17180915.692000] saa7134_alsa: Unknown symbol dmasound_exit
[17180915.692000] saa7134_alsa: Unknown symbol dmasound_init
[17180915.692000] saa7134_alsa: Unknown symbol saa7134_set_dmabits
[17180923.908000] saa7134_alsa: Unknown symbol saa_dsp_writel
[17180923.912000] saa7134_alsa: Unknown symbol saa7134_devlist
[17180923.912000] saa7134_alsa: Unknown symbol saa7134_pgtable_alloc
[17180923.912000] saa7134_alsa: Unknown symbol saa7134_pgtable_build
[17180923.912000] saa7134_alsa: Unknown symbol saa7134_pgtable_free
[17180923.912000] saa7134_alsa: Unknown symbol dmasound_exit
[17180923.912000] saa7134_alsa: Unknown symbol dmasound_init
[17180923.912000] saa7134_alsa: Unknown symbol saa7134_set_dmabits
Bene sono riuscito di nuovo a fargli avere il segnale, ora mi ritrovo come prima. VEdo le immagini ma non sento nulla :9 qualcuno puo darmi una mano???
Ritorna su
ohmmiunque
Prode Principiante
Messaggi: 50
Iscrizione: mercoledì 28 dicembre 2005, 10:08

Re: flytv prime 30

Messaggio da ohmmiunque »

ohmmiunque ha scritto:
ohmmiunque ha scritto:
ohmmiunque ha scritto:
Devnull ha scritto: ti dà lo stesso problema utilizzando la recovery mode ?
mi sembra strano...
e si mi da la stessa cosa.

Ora per di più credo di aver fatto una fesseria, sono andato come root all'interno della cartella dove erano caricati i moduli e ho cancellato il modulo saa7134 pensando di poterlo reinstallare. Ora nel modconf non mi da piu il semplice modulo saa7134 ma gli altri 5......


RIsultato vedo le immagini con una perfezione da invidia ma il suono non c'è :P sto rosicando allegramente :)

sai cosa posso fare??p

Ora se faccio il comando dmseg esce fuori questo, credo di avere qualche impiccio con il modulo saa7134....
dmesg

Codice: Seleziona tutto

[17179569.184000] Linux version 2.6.15-27-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Sat Sep 16 01:51:59 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000002fffc000 (usable)
[17179569.184000]  BIOS-e820: 000000002fffc000 - 000000002ffff000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000002ffff000 - 0000000030000000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 767MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 196604
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 192508 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ASUS                                  ) @ 0x000f5e20
[17179569.184000] ACPI: RSDT (v001 ASUS   A7V8X-X  0x42302e31 MSFT 0x31313031) @ 0x2fffc000
[17179569.184000] ACPI: FADT (v001 ASUS   A7V8X-X  0x42302e31 MSFT 0x31313031) @ 0x2fffc0b2
[17179569.184000] ACPI: BOOT (v001 ASUS   A7V8X-X  0x42302e31 MSFT 0x31313031) @ 0x2fffc030
[17179569.184000] ACPI: MADT (v001 ASUS   A7V8X-X  0x42302e31 MSFT 0x31313031) @ 0x2fffc058
[17179569.184000] ACPI: DSDT (v001   ASUS A7V8X-X  0x00001000 MSFT 0x0100000b) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0xe408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:10 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hdb1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 1988.640 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179572.936000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179572.936000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179572.960000] Memory: 769460k/786416k available (1976k kernel code, 16296k reserved, 606k data, 288k init, 0k highmem)
[17179572.960000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179573.040000] Calibrating delay using timer specific routine.. 3980.55 BogoMIPS (lpj=7961110)
[17179573.040000] Security Framework v1.0.0 initialized
[17179573.040000] SELinux:  Disabled at boot.
[17179573.040000] Mount-cache hash table entries: 512
[17179573.040000] CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
[17179573.040000] CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
[17179573.040000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179573.040000] CPU: L2 Cache: 256K (64 bytes/line)
[17179573.040000] CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000
[17179573.040000] mtrr: v2.0 (20020519)
[17179573.040000] CPU: AMD Sempron(TM) 2800+ stepping 00
[17179573.040000] Enabling fast FPU save and restore... done.
[17179573.040000] Enabling unmasked SIMD FPU exception support... done.
[17179573.040000] Checking 'hlt' instruction... OK.
[17179573.056000] checking if image is initramfs... it is
[17179573.536000] Freeing initrd memory: 6024k freed
[17179573.544000] ACPI: Looking for DSDT ... not found!
[17179573.552000] ENABLING IO-APIC IRQs
[17179573.552000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179573.696000] NET: Registered protocol family 16
[17179573.696000] EISA bus registered
[17179573.696000] ACPI: bus type pci registered
[17179573.696000] PCI: PCI BIOS revision 2.10 entry at 0xf1960, last bus=1
[17179573.696000] PCI: Using configuration type 1
[17179573.696000] ACPI: Subsystem revision 20051216
[17179573.700000] ACPI: Interpreter enabled
[17179573.700000] ACPI: Using IOAPIC for interrupt routing
[17179573.700000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
[17179573.700000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[17179573.700000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[17179573.700000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[17179573.700000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12)
[17179573.700000] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12)
[17179573.700000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179573.700000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.700000] PCI: Probing PCI hardware (bus 00)
[17179573.704000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179573.704000] PCI quirk: region e400-e47f claimed by vt8235 PM
[17179573.704000] PCI quirk: region e800-e80f claimed by vt8235 SMB
[17179573.704000] Boot video device is 0000:01:00.0
[17179573.704000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.708000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[17179573.716000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.716000] pnp: PnP ACPI init
[17179573.720000] pnp: PnP ACPI: found 14 devices
[17179573.720000] PnPBIOS: Disabled by ACPI PNP
[17179573.720000] PCI: Using ACPI for IRQ routing
[17179573.720000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179573.724000] pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved
[17179573.724000] pnp: 00:01: ioport range 0xe800-0xe81f could not be reserved
[17179573.724000] pnp: 00:0d: ioport range 0x290-0x297 has been reserved
[17179573.724000] pnp: 00:0d: ioport range 0x370-0x375 has been reserved
[17179573.724000] PCI: Bridge: 0000:00:01.0
[17179573.724000]   IO window: d000-dfff
[17179573.724000]   MEM window: df000000-dfffffff
[17179573.724000]   PREFETCH window: e0000000-f7ffffff
[17179573.724000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179573.724000] Simple Boot Flag at 0x3a set to 0x1
[17179573.724000] audit: initializing netlink socket (disabled)
[17179573.724000] audit(1159786236.724:1): initialized
[17179573.724000] VFS: Disk quotas dquot_6.5.1
[17179573.724000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.724000] Initializing Cryptographic API
[17179573.724000] io scheduler noop registered
[17179573.724000] io scheduler anticipatory registered
[17179573.724000] io scheduler deadline registered
[17179573.724000] io scheduler cfq registered
[17179573.724000] isapnp: Scanning for PnP cards...
[17179574.080000] isapnp: No Plug & Play device found
[17179574.092000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[17179574.092000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179574.092000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179574.092000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179574.092000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179574.096000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179574.096000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179574.096000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179574.096000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179574.096000] mice: PS/2 mouse device common for all mice
[17179574.096000] EISA: Probing bus 0 at eisa.0
[17179574.096000] EISA: Detected 0 cards.
[17179574.096000] NET: Registered protocol family 2
[17179574.128000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.132000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179574.132000] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[17179574.132000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179574.132000] TCP: Hash tables configured (established 131072 bind 65536)
[17179574.132000] TCP reno registered
[17179574.132000] TCP bic registered
[17179574.132000] NET: Registered protocol family 1
[17179574.132000] NET: Registered protocol family 8
[17179574.132000] NET: Registered protocol family 20
[17179574.132000] Using IPI Shortcut mode
[17179574.132000] ACPI wakeup devices:
[17179574.132000] PCI0 PCI1 USB0 USB1 USB2 SU20 SLAN
[17179574.132000] ACPI: (supports S0 S1 S4 S5)
[17179574.132000] Freeing unused kernel memory: 288k freed
[17179574.180000] vga16fb: initializing
[17179574.180000] vga16fb: mapped to 0xc00a0000
[17179574.272000] Console: switching to colour frame buffer device 80x25
[17179574.272000] fb0: VGA16 VGA frame buffer device
[17179575.396000] Capability LSM initialized
[17179576.020000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[17179576.020000] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
[17179576.020000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
[17179576.020000] VP_IDE: chipset revision 6
[17179576.020000] VP_IDE: not 100% native mode: will probe irqs later
[17179576.020000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[17179576.020000]     ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:DMA
[17179576.020000]     ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:pio, hdd:DMA
[17179576.020000] Probing IDE interface ide0...
[17179576.440000] hda: Maxtor 6Y080L0, ATA DISK drive
[17179576.720000] hdb: Maxtor 6B160P0, ATA DISK drive
[17179576.776000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.800000] Probing IDE interface ide1...
[17179611.596000] ide1: Wait for ready failed before probe !
[17179617.044000] hdc: IRQ probe failed (0xffffbdfc)
[17179622.268000] hdc: IRQ probe failed (0xffffbdfc)
[17179622.268000] hdc: no response (status = 0x80), resetting drive
[17179657.620000] hdc: IRQ probe failed (0xffffbdfc)
[17179657.620000] hdc: no response (status = 0x80)
[17179658.532000] hdd: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
[17179658.588000] ide1 at 0x170-0x177,0x376 on irq 15
[17179658.596000] hda: max request size: 128KiB
[17179658.612000] hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[17179658.612000] hda: cache flushes supported
[17179658.612000]  hda: hda1 hda2 < hda5 >
[17179658.632000] hdb: max request size: 1024KiB
[17179658.636000] hdb: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(133)
[17179658.636000] hdb: cache flushes supported
[17179658.636000]  hdb: hdb1 hdb2 < hdb5 >
[17179658.684000] hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179658.684000] Uniform CD-ROM driver Revision: 3.20
[17179660.088000] usbcore: registered new driver usbfs
[17179660.088000] usbcore: registered new driver hub
[17179660.088000] USB Universal Host Controller Interface driver v2.3
[17179660.088000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 169
[17179660.088000] PCI: Via IRQ fixup for 0000:00:10.0, from 0 to 9
[17179660.088000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179660.092000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179660.092000] uhci_hcd 0000:00:10.0: irq 169, io base 0x0000b800
[17179660.092000] hub 1-0:1.0: USB hub found
[17179660.092000] hub 1-0:1.0: 2 ports detected
[17179660.196000] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 169
[17179660.196000] PCI: Via IRQ fixup for 0000:00:10.1, from 0 to 9
[17179660.196000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179660.196000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179660.196000] uhci_hcd 0000:00:10.1: irq 169, io base 0x0000b400
[17179660.196000] hub 2-0:1.0: USB hub found
[17179660.196000] hub 2-0:1.0: 2 ports detected
[17179660.300000] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 169
[17179660.300000] PCI: Via IRQ fixup for 0000:00:10.2, from 0 to 9
[17179660.300000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179660.300000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179660.300000] uhci_hcd 0000:00:10.2: irq 169, io base 0x0000b000
[17179660.300000] hub 3-0:1.0: USB hub found
[17179660.300000] hub 3-0:1.0: 2 ports detected
[17179660.404000] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 169
[17179660.404000] PCI: Via IRQ fixup for 0000:00:10.3, from 0 to 9
[17179660.404000] ehci_hcd 0000:00:10.3: EHCI Host Controller
[17179660.404000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179660.404000] ehci_hcd 0000:00:10.3: irq 169, io mem 0xde000000
[17179660.404000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179660.404000] hub 4-0:1.0: USB hub found
[17179660.404000] hub 4-0:1.0: 6 ports detected
[17179660.588000] Attempting manual resume
[17179660.608000] kjournald starting.  Commit interval 5 seconds
[17179660.608000] EXT3-fs: mounted filesystem with ordered data mode.
[17179669.900000] Linux agpgart interface v0.101 (c) Dave Jones
[17179669.904000] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[17179669.908000] agpgart: AGP aperture is 64M @ 0xf8000000
[17179670.196000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179670.204000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179670.224000] irda_init()
[17179670.224000] NET: Registered protocol family 23
[17179670.344000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179670.344000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 177
[17179670.344000] PCI: Via IRQ fixup for 0000:00:12.0, from 0 to 1
[17179670.344000] eth0: VIA Rhine II at 0x1a400, 00:11:2f:ab:87:db, IRQ 177.
[17179670.344000] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 0020.
[17179670.672000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 185
[17179670.672000] PCI: Via IRQ fixup for 0000:00:11.5, from 0 to 9
[17179670.676000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179670.868000] Real Time Clock Driver v1.12
[17179670.872000] input: PC Speaker as /class/input/input1
[17179671.028000] Floppy drive(s): fd0 is 1.44M
[17179671.076000] FDC 0 is a post-1991 82077
[17179671.084000] parport: PnPBIOS parport detected.
[17179671.084000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179671.096000] parport0: Printer, hp deskjet 5550
[17179671.148000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[17179671.192000] codec_read: codec 0 is not valid [0x107e5370]
[17179671.200000] codec_read: codec 0 is not valid [0x107e5370]
[17179671.204000] codec_read: codec 0 is not valid [0x107e5370]
[17179671.212000] codec_read: codec 0 is not valid [0x107e5370]
[17179671.728000] ts: Compaq touchscreen protocol output
[17179671.736000] eth0: link up, 10Mbps, half-duplex, lpa 0x0020
[17179672.776000] NET: Registered protocol family 17
[17179673.208000] lp0: using parport0 (interrupt-driven).
[17179673.260000] Linux video capture interface: v1.00
[17179673.292000] bttv: driver version 0.9.16 loaded
[17179673.292000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[17179673.396000] saa7134_dvb: Unknown symbol saa7134_ts_register
[17179673.396000] saa7134_dvb: Unknown symbol saa7134_ts_qops
[17179673.396000] saa7134_dvb: Unknown symbol saa7134_i2c_call_clients
[17179673.396000] saa7134_dvb: Unknown symbol saa7134_ts_unregister
[17179673.408000] saa7134_empress: Unknown symbol saa7134_devlist
[17179673.408000] saa7134_empress: Unknown symbol saa7134_common_ioctl
[17179673.408000] saa7134_empress: Unknown symbol saa7134_boards
[17179673.408000] saa7134_empress: Unknown symbol saa7134_ts_register
[17179673.408000] saa7134_empress: Unknown symbol saa7134_print_ioctl
[17179673.408000] saa7134_empress: Unknown symbol saa7134_ts_qops
[17179673.408000] saa7134_empress: Unknown symbol saa7134_i2c_call_clients
[17179673.408000] saa7134_empress: Unknown symbol saa7134_ts_unregister
[17179673.456000] Adding 2265124k swap on /dev/hdb5.  Priority:-1 extents:1 across:2265124k
[17179673.604000] EXT3 FS on hdb1, internal journal
[17179673.772000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179673.772000] md: bitmap version 4.39
[17179674.680000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179676.556000] NET: Registered protocol family 10
[17179676.556000] lo: Disabled Privacy Extensions
[17179676.556000] IPv6 over IPv4 tunneling driver
[17179681.876000] ACPI: Power Button (FF) [PWRF]
[17179681.876000] ACPI: Power Button (CM) [PWRB]
[17179681.984000] ibm_acpi: ec object not found
[17179682.016000] pcc_acpi: loading...
[17179686.868000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[17179686.872000] [fglrx] Maximum main memory to use for locked dma buffers: 680 MBytes.
[17179686.872000] [fglrx] module loaded - fglrx 8.28.8 [Aug 17 2006] on minor 0
[17179686.920000] eth0: no IPv6 routers present
[17179687.188000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
[17179689.560000] [fglrx] Internal AGP support requested, but kernel AGP support active.
[17179689.560000] [fglrx] Have to use kernel AGP support to avoid conflicts.
[17179689.560000] [fglrx] AGP detected, AgpState   = 0x1f000a0b (hardware caps of chipset)
[17179689.560000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17179689.560000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17179689.560000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17179689.560000] [fglrx] AGP enabled,  AgpCommand = 0x1f000302 (selected caps)
[17179689.572000] [fglrx] total      GART = 67108864
[17179689.572000] [fglrx] free       GART = 51113984
[17179689.572000] [fglrx] max single GART = 51113984
[17179689.572000] [fglrx] total      LFB  = 127733760
[17179689.572000] [fglrx] free       LFB  = 118927360
[17179689.572000] [fglrx] max single LFB  = 118927360
[17179689.572000] [fglrx] total      Inv  = 0
[17179689.572000] [fglrx] free       Inv  = 0
[17179689.576000] [fglrx] max single Inv  = 0
[17179689.576000] [fglrx] total      TIM  = 0
[17179689.888000] ppdev: user-space parallel port driver
[17179690.476000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179690.476000] apm: overridden by ACPI.
[17179699.844000] Bluetooth: Core ver 2.8
[17179699.844000] NET: Registered protocol family 31
[17179699.844000] Bluetooth: HCI device and connection manager initialized
[17179699.844000] Bluetooth: HCI socket layer initialized
[17179699.876000] Bluetooth: L2CAP ver 2.8
[17179699.876000] Bluetooth: L2CAP socket layer initialized
[17179699.904000] Bluetooth: RFCOMM socket layer initialized
[17179699.904000] Bluetooth: RFCOMM TTY layer initialized
[17179699.904000] Bluetooth: RFCOMM ver 1.7
[17179714.076000] eth0: no IPv6 routers present
[17180915.692000] saa7134_alsa: Unknown symbol saa_dsp_writel
[17180915.692000] saa7134_alsa: Unknown symbol saa7134_devlist
[17180915.692000] saa7134_alsa: Unknown symbol saa7134_pgtable_alloc
[17180915.692000] saa7134_alsa: Unknown symbol saa7134_pgtable_build
[17180915.692000] saa7134_alsa: Unknown symbol saa7134_pgtable_free
[17180915.692000] saa7134_alsa: Unknown symbol dmasound_exit
[17180915.692000] saa7134_alsa: Unknown symbol dmasound_init
[17180915.692000] saa7134_alsa: Unknown symbol saa7134_set_dmabits
[17180923.908000] saa7134_alsa: Unknown symbol saa_dsp_writel
[17180923.912000] saa7134_alsa: Unknown symbol saa7134_devlist
[17180923.912000] saa7134_alsa: Unknown symbol saa7134_pgtable_alloc
[17180923.912000] saa7134_alsa: Unknown symbol saa7134_pgtable_build
[17180923.912000] saa7134_alsa: Unknown symbol saa7134_pgtable_free
[17180923.912000] saa7134_alsa: Unknown symbol dmasound_exit
[17180923.912000] saa7134_alsa: Unknown symbol dmasound_init
[17180923.912000] saa7134_alsa: Unknown symbol saa7134_set_dmabits
Bene sono riuscito di nuovo a fargli avere il segnale, ora mi ritrovo come prima. VEdo le immagini ma non sento nulla :9 qualcuno puo darmi una mano???
non vi scordate di me :p pls pls
Ritorna su
Avatar utente
Devnull
Rampante Reduce
Rampante Reduce
Messaggi: 8158
Iscrizione: lunedì 21 novembre 2005, 15:56
Località: Ancona

Re: flytv prime 30

Messaggio da Devnull »

Che casino che hai fatto in questo post !  :P
Se il modulosaa7134 non si disinstalla prova a disinstallare prima i moduli che cominciano con saa7134
disinstalla saa7134 alsa.Poi per ultimo disinstalla l' saa7134 e reistallalo con l'opzione tuner=26
Il tuner 26 non è l'unico utilizzabile .La scheda funziona anche con il tuner=1

Codice: Seleziona tutto

 dmesg | grep tuner
il cui output è :
[17179595.508000] saa7130[0]: there are different flyvideo cards with different tuners
[17179595.508000] saa7130[0]: out there, you might have to use the tuner= insmod
[17179595.688000] tuner 1-0061: chip found @ 0xc2 (saa7130[0])
[17179595.688000] tuner 1-0061: type set to 1 (Philips PAL_I (FI1246 and compatibles))
Da regolamento (Sez. I punto 15) è vietato inviare messaggi privati per richieste di supporto tecnico, si prega di aprire una discussione nella giusta sezione.
Hai domande sul forum? Leggi le FAQ e il Regolamento.
→ → → → Partecipa alla documentazione ← ← ← ←
Ritorna su
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: Bing [Bot] e 2 ospiti