da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile
-
andri2bajo
- Prode Principiante
- Messaggi: 26
- Iscrizione: martedì 30 dicembre 2008, 18:20
da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile
Ciao a tutti ieri sera ho effettuato aggiornamento da 9.10 a 10.04 LTS,
L'aggiornamento mi è andato senza problemi, e quando mi ha chiesto di sostituire il menu.lst gli ho detto di no' perche' volevo lascier come era (e cosi da quando è disponibile la nuova versione di splah ho sempre fatto cosi)
cois poi prima dif are il reboot dopo l'ipgrade a 10.04 LTS, sono entrato in meodifica del menu.lst ed ho insertio le righe per il nuovo kernel.
riavviato, il sistema parte ,(anche se è lento) pero ' poi dice che non riesce a fare un mount e mi chiede di inserire o S per skip o M per correggere manualemtne il rpoblema.
do S , (non sapendo che fare), ed il siema parte.
pero pero pero: cotrnollo di qua e di la e trovo errorei di cui riporto il testo.
Mount /proc/bus/usb terminato con stato 1
il file system non puo' essere montato: /proc/bus/usb
Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile
poi ho anche errreo su swapon
swapon: /dev/sda7: open failed: Permesso negato????
swapon /dev/disk/by-uid/.............(2649) terminato con stato 235
Problem ocn l'attivazione dell swap
tutto il rmesto sembra funzioni, (a parte google-chrome che non va piu')
chi mi aiuta a risolvere?
grazie
maurizio
L'aggiornamento mi è andato senza problemi, e quando mi ha chiesto di sostituire il menu.lst gli ho detto di no' perche' volevo lascier come era (e cosi da quando è disponibile la nuova versione di splah ho sempre fatto cosi)
cois poi prima dif are il reboot dopo l'ipgrade a 10.04 LTS, sono entrato in meodifica del menu.lst ed ho insertio le righe per il nuovo kernel.
riavviato, il sistema parte ,(anche se è lento) pero ' poi dice che non riesce a fare un mount e mi chiede di inserire o S per skip o M per correggere manualemtne il rpoblema.
do S , (non sapendo che fare), ed il siema parte.
pero pero pero: cotrnollo di qua e di la e trovo errorei di cui riporto il testo.
Mount /proc/bus/usb terminato con stato 1
il file system non puo' essere montato: /proc/bus/usb
Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile
poi ho anche errreo su swapon
swapon: /dev/sda7: open failed: Permesso negato????
swapon /dev/disk/by-uid/.............(2649) terminato con stato 235
Problem ocn l'attivazione dell swap
tutto il rmesto sembra funzioni, (a parte google-chrome che non va piu')
chi mi aiuta a risolvere?
grazie
maurizio
- Pingue_pinguino
- Entusiasta Emergente

- Messaggi: 1514
- Iscrizione: giovedì 24 novembre 2005, 17:52
- Località: Valsusa
Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile
Ciao,
Posta l'esito di
Hai grub o grub2?
Questo è dovuto al fatto che nel tuo /etc/fstab c'è una riga per montare il filesystem usb che nei nuovi kernel è deprecata. Avevi installato Virtualbox?Mount /proc/bus/usb terminato con stato 1
Posta l'esito di
Codice: Seleziona tutto
cat /etc/fstabQui azzardo: forse in fase di aggiornamento è cambiato l'uuid della partizione di swap che, di conseguenza, non combacia con quello indicato in fstab, quindi fallisce il montaggio perché non la trova.Problem ocn l'attivazione dell swap
Hai grub o grub2?
Ultima modifica di Pingue_pinguino il giovedì 6 maggio 2010, 9:00, modificato 1 volta in totale.
-
andri2bajo
- Prode Principiante
- Messaggi: 26
- Iscrizione: martedì 30 dicembre 2008, 18:20
Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile
ciao e innanzitutto grazie..pinguino
effettivamnte VirtualBox è installato
ed ho Grub non Grub2 (ho Win7)
come posso fare a vedere se è cambiato l'UUID dello swap?
nel mount dello swap da errore e mi da anche il codice UID 0ecaa986......... m
ps.purtroppo pero' ora sono al lavoro e non ho a seguito il pc quindi dovro provare stasera.....per postare il cat Fstab
domanda: una volta individuato UUID attuale che faccio' lo cambi dentro a quale file?...
grazie MAurizio
effettivamnte VirtualBox è installato
ed ho Grub non Grub2 (ho Win7)
come posso fare a vedere se è cambiato l'UUID dello swap?
nel mount dello swap da errore e mi da anche il codice UID 0ecaa986......... m
ps.purtroppo pero' ora sono al lavoro e non ho a seguito il pc quindi dovro provare stasera.....per postare il cat Fstab
domanda: una volta individuato UUID attuale che faccio' lo cambi dentro a quale file?...
grazie MAurizio
- Pingue_pinguino
- Entusiasta Emergente

- Messaggi: 1514
- Iscrizione: giovedì 24 novembre 2005, 17:52
- Località: Valsusa
Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile
confronti l'uuid che ti esce concome posso fare a vedere se è cambiato l'UUID dello swap?
Codice: Seleziona tutto
ls -l /dev/disk/by-uuid/Se sono diversi sostituisci quello nel /etc/fstab
-
andri2bajo
- Prode Principiante
- Messaggi: 26
- Iscrizione: martedì 30 dicembre 2008, 18:20
Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile
ok grazie stasera mi ci metto
poi magari disnstallo anceh VirtualBox che avevo caricato per provare! (funzionava bene comunque, usb etc...)
poi magari disnstallo anceh VirtualBox che avevo caricato per provare! (funzionava bene comunque, usb etc...)
- Pingue_pinguino
- Entusiasta Emergente

- Messaggi: 1514
- Iscrizione: giovedì 24 novembre 2005, 17:52
- Località: Valsusa
Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile
Non è necessario, basta solo cambiare delle impostazioni e funziona anche su lucidpoi magari disnstallo anceh VirtualBox che avevo caricato per provare! (funzionava bene comunque, usb etc...)
-
marcogenni
- Prode Principiante
- Messaggi: 57
- Iscrizione: martedì 27 novembre 2007, 20:18
Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile
Ciao! Scusate se mi intrometto, ma seguo la discussione con interesse perché ho lo stesso problema..
- Pingue_pinguino
- Entusiasta Emergente

- Messaggi: 1514
- Iscrizione: giovedì 24 novembre 2005, 17:52
- Località: Valsusa
Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile
Nessuna intromissione, figurati ma.. quale dei due problemi hai?
-
andri2bajo
- Prode Principiante
- Messaggi: 26
- Iscrizione: martedì 30 dicembre 2008, 18:20
Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile
ciao Pinguino , ecco il risultato dei comandi:
family@maurizio-laptop:/$ cat /etc/fstab
# /etc/fstab: static file system information.
#
#
proc /proc proc defaults 0 0
# /dev/sda6
UUID=616fa3ab-5f9f-4ab0-bafb-5b6707931e95 / ext3 relatime,errors=remount-ro 0 1
# /dev/sda7
UUID=0ecaa986-17ae-4595-8a16-a8ccd4de55da none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
## USB file system (Virtual Box):
none /proc/bus/usb usbfs devgid=1001,devmode=664 0 0
family@maurizio-laptop:/$ ls -l /dev/disk/by-uuid/
totale 0
lrwxrwxrwx 1 root root 10 2010-05-06 17:42 0ecaa986-17ae-4595-8a16-a8ccd4de55da -> ../../sda7
lrwxrwxrwx 1 root root 10 2010-05-06 17:42 616fa3ab-5f9f-4ab0-bafb-5b6707931e95 -> ../../sda6
lrwxrwxrwx 1 root root 11 2010-05-06 17:43 84940750-819d-43af-bd18-ee8aceb2a2ca -> ../../loop0
lrwxrwxrwx 1 root root 10 2010-05-06 17:42 90583F28583F0D0A -> ../../sda5
lrwxrwxrwx 1 root root 10 2010-05-06 17:42 9417-721B -> ../../sda1
lrwxrwxrwx 1 root root 10 2010-05-06 17:42 F40842CF08429092 -> ../../sda2
pero' l'UUID del swap corrisponde! mi pare!
family@maurizio-laptop:/$ cat /etc/fstab
# /etc/fstab: static file system information.
#
#
proc /proc proc defaults 0 0
# /dev/sda6
UUID=616fa3ab-5f9f-4ab0-bafb-5b6707931e95 / ext3 relatime,errors=remount-ro 0 1
# /dev/sda7
UUID=0ecaa986-17ae-4595-8a16-a8ccd4de55da none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
## USB file system (Virtual Box):
none /proc/bus/usb usbfs devgid=1001,devmode=664 0 0
family@maurizio-laptop:/$ ls -l /dev/disk/by-uuid/
totale 0
lrwxrwxrwx 1 root root 10 2010-05-06 17:42 0ecaa986-17ae-4595-8a16-a8ccd4de55da -> ../../sda7
lrwxrwxrwx 1 root root 10 2010-05-06 17:42 616fa3ab-5f9f-4ab0-bafb-5b6707931e95 -> ../../sda6
lrwxrwxrwx 1 root root 11 2010-05-06 17:43 84940750-819d-43af-bd18-ee8aceb2a2ca -> ../../loop0
lrwxrwxrwx 1 root root 10 2010-05-06 17:42 90583F28583F0D0A -> ../../sda5
lrwxrwxrwx 1 root root 10 2010-05-06 17:42 9417-721B -> ../../sda1
lrwxrwxrwx 1 root root 10 2010-05-06 17:42 F40842CF08429092 -> ../../sda2
pero' l'UUID del swap corrisponde! mi pare!
- Pingue_pinguino
- Entusiasta Emergente

- Messaggi: 1514
- Iscrizione: giovedì 24 novembre 2005, 17:52
- Località: Valsusa
Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile
Prova a commentare questa riga nel /etc/fstab poi riavvia e vedi se almeno il primo errore si sistema.
Hai voglia di postare anche il /boot/grub/menu.lst?
Codice: Seleziona tutto
none /proc/bus/usb usbfs devgid=1001,devmode=664 0 0Anche a me pare. Forse l'errore è altrove.pero' l'UUID del swap corrisponde! mi pare!
Hai voglia di postare anche il /boot/grub/menu.lst?
-
andri2bajo
- Prode Principiante
- Messaggi: 26
- Iscrizione: martedì 30 dicembre 2008, 18:20
Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=616fa3ab-5f9f-4ab0-bafb-5b6707931e95 ro ROOTFLAGS=syncio
## default grub root device
## e.g. groot=(hd0,0)
# groot=616fa3ab-5f9f-4ab0-bafb-5b6707931e95
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 10.04, kernel 2.6.32-22-generic
uuid 616fa3ab-5f9f-4ab0-bafb-5b6707931e95
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=616fa3ab-5f9f-4ab0-bafb-5b6707931e95 ro ROOTFLAGS=syncio quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
title Ubuntu 9.10, kernel 2.6.32-22-generic (recovery mode)
uuid 616fa3ab-5f9f-4ab0-bafb-5b6707931e95
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=616fa3ab-5f9f-4ab0-bafb-5b6707931e95 ro ROOTFLAGS=syncio single
initrd /boot/initrd.img-2.6.32-22-generic
title Ubuntu 9.10, kernel 2.6.31-21-generic
uuid 616fa3ab-5f9f-4ab0-bafb-5b6707931e95
kernel /boot/vmlinuz-2.6.31-21-generic root=UUID=616fa3ab-5f9f-4ab0-bafb-5b6707931e95 ro ROOTFLAGS=syncio quiet splash
initrd /boot/initrd.img-2.6.31-21-generic
title Ubuntu 9.10, memtest86+
uuid 616fa3ab-5f9f-4ab0-bafb-5b6707931e95
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
root (hd0,1)
savedefault
makeactive
chainloader +1
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=616fa3ab-5f9f-4ab0-bafb-5b6707931e95 ro ROOTFLAGS=syncio
## default grub root device
## e.g. groot=(hd0,0)
# groot=616fa3ab-5f9f-4ab0-bafb-5b6707931e95
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 10.04, kernel 2.6.32-22-generic
uuid 616fa3ab-5f9f-4ab0-bafb-5b6707931e95
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=616fa3ab-5f9f-4ab0-bafb-5b6707931e95 ro ROOTFLAGS=syncio quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
title Ubuntu 9.10, kernel 2.6.32-22-generic (recovery mode)
uuid 616fa3ab-5f9f-4ab0-bafb-5b6707931e95
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=616fa3ab-5f9f-4ab0-bafb-5b6707931e95 ro ROOTFLAGS=syncio single
initrd /boot/initrd.img-2.6.32-22-generic
title Ubuntu 9.10, kernel 2.6.31-21-generic
uuid 616fa3ab-5f9f-4ab0-bafb-5b6707931e95
kernel /boot/vmlinuz-2.6.31-21-generic root=UUID=616fa3ab-5f9f-4ab0-bafb-5b6707931e95 ro ROOTFLAGS=syncio quiet splash
initrd /boot/initrd.img-2.6.31-21-generic
title Ubuntu 9.10, memtest86+
uuid 616fa3ab-5f9f-4ab0-bafb-5b6707931e95
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
root (hd0,1)
savedefault
makeactive
chainloader +1
-
andri2bajo
- Prode Principiante
- Messaggi: 26
- Iscrizione: martedì 30 dicembre 2008, 18:20
- Pingue_pinguino
- Entusiasta Emergente

- Messaggi: 1514
- Iscrizione: giovedì 24 novembre 2005, 17:52
- Località: Valsusa
Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile
Come immaginavo, l'errore è altrove.
che ti dice?
L'altro errore si è sistemato?
Codice: Seleziona tutto
swapon -sL'altro errore si è sistemato?
Chi c’è in linea
Visualizzano questa sezione: Bing [Bot] e 6 ospiti