da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile

Problemi riscontrati durante l'installazione di Ubuntu, degli aggiornamenti e degli avanzamenti del sistema.
Scrivi risposta
andri2bajo
Prode Principiante
Messaggi: 26
Iscrizione: martedì 30 dicembre 2008, 18:20

da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile

Messaggio da andri2bajo »

Ciao a tutti ieri sera ho effettuato aggiornamento da 9.10 a 10.04 LTS,
L'aggiornamento mi è andato senza problemi, e quando mi ha chiesto di sostituire il menu.lst gli ho detto di no' perche' volevo lascier come era (e cosi da quando è disponibile la nuova versione di splah ho sempre fatto cosi)

cois poi prima dif are il reboot dopo l'ipgrade a 10.04 LTS, sono entrato in meodifica del menu.lst ed ho insertio le righe per il nuovo kernel.

riavviato, il sistema parte ,(anche se è lento) pero ' poi dice che non riesce a fare un mount e mi chiede di inserire o S per skip o M per correggere manualemtne il rpoblema.

do S , (non sapendo che fare), ed il siema parte.

pero pero pero: cotrnollo di qua e di la e trovo errorei di cui riporto il testo.

Mount /proc/bus/usb terminato con stato 1
il file system non puo' essere montato: /proc/bus/usb
Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile


poi ho anche errreo su swapon

swapon: /dev/sda7: open failed: Permesso negato????
swapon /dev/disk/by-uid/.............(2649) terminato con stato 235
Problem ocn l'attivazione dell swap

tutto il rmesto sembra funzioni, (a parte google-chrome che non va piu')

chi mi aiuta a risolvere?


grazie

maurizio
Avatar utente
Pingue_pinguino
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1514
Iscrizione: giovedì 24 novembre 2005, 17:52
Località: Valsusa

Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile

Messaggio da Pingue_pinguino »

Ciao,
Mount /proc/bus/usb terminato con stato 1
Questo è dovuto al fatto che nel tuo /etc/fstab c'è una riga per montare il filesystem usb che nei nuovi kernel è deprecata. Avevi installato Virtualbox?
Posta l'esito di

Codice: Seleziona tutto

cat /etc/fstab
Problem ocn l'attivazione dell swap
Qui azzardo: forse in fase di aggiornamento è cambiato l'uuid della partizione di swap che, di conseguenza, non combacia con quello indicato in fstab, quindi fallisce il montaggio perché non la trova.
Hai grub o grub2?
Ultima modifica di Pingue_pinguino il giovedì 6 maggio 2010, 9:00, modificato 1 volta in totale.
andri2bajo
Prode Principiante
Messaggi: 26
Iscrizione: martedì 30 dicembre 2008, 18:20

Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile

Messaggio da andri2bajo »

ciao e innanzitutto grazie..pinguino
effettivamnte VirtualBox è installato
ed ho Grub non Grub2 (ho Win7)

come posso fare a vedere se è cambiato l'UUID dello swap?
nel mount dello swap da errore e mi da anche il codice UID 0ecaa986......... m

ps.purtroppo pero' ora sono al lavoro e non ho a seguito il pc quindi dovro provare stasera.....per postare il cat Fstab

domanda: una volta individuato UUID attuale che faccio' lo cambi dentro a quale file?...

grazie MAurizio
Avatar utente
Pingue_pinguino
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1514
Iscrizione: giovedì 24 novembre 2005, 17:52
Località: Valsusa

Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile

Messaggio da Pingue_pinguino »

come posso fare a vedere se è cambiato l'UUID dello swap?
confronti l'uuid che ti esce con

Codice: Seleziona tutto

ls -l /dev/disk/by-uuid/
con quello indicato nel file /etc/fstab.

Se sono diversi sostituisci quello nel /etc/fstab
andri2bajo
Prode Principiante
Messaggi: 26
Iscrizione: martedì 30 dicembre 2008, 18:20

Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile

Messaggio da andri2bajo »

ok grazie stasera mi ci metto

poi magari disnstallo anceh VirtualBox che avevo caricato per provare! (funzionava bene comunque, usb etc...)
Avatar utente
Pingue_pinguino
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1514
Iscrizione: giovedì 24 novembre 2005, 17:52
Località: Valsusa

Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile

Messaggio da Pingue_pinguino »

poi magari disnstallo anceh VirtualBox che avevo caricato per provare! (funzionava bene comunque, usb etc...)
Non è necessario, basta solo cambiare delle impostazioni e funziona anche su lucid
marcogenni
Prode Principiante
Messaggi: 57
Iscrizione: martedì 27 novembre 2007, 20:18

Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile

Messaggio da marcogenni »

Ciao! Scusate se mi intrometto, ma seguo la discussione con interesse perché ho lo stesso problema..
Avatar utente
Pingue_pinguino
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1514
Iscrizione: giovedì 24 novembre 2005, 17:52
Località: Valsusa

Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile

Messaggio da Pingue_pinguino »

Nessuna intromissione, figurati ma.. quale dei due problemi hai?
andri2bajo
Prode Principiante
Messaggi: 26
Iscrizione: martedì 30 dicembre 2008, 18:20

Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile

Messaggio da andri2bajo »

ciao Pinguino , ecco il risultato dei comandi:


family@maurizio-laptop:/$ cat /etc/fstab
# /etc/fstab: static file system information.
#
#            
proc            /proc          proc    defaults        0      0
# /dev/sda6
UUID=616fa3ab-5f9f-4ab0-bafb-5b6707931e95 /              ext3    relatime,errors=remount-ro 0      1
# /dev/sda7
UUID=0ecaa986-17ae-4595-8a16-a8ccd4de55da none            swap    sw              0      0
/dev/scd0      /media/cdrom0  udf,iso9660 user,noauto,exec,utf8 0      0
## USB file system (Virtual Box):
none /proc/bus/usb usbfs devgid=1001,devmode=664 0 0

family@maurizio-laptop:/$ ls -l /dev/disk/by-uuid/
totale 0
lrwxrwxrwx 1 root root 10 2010-05-06 17:42 0ecaa986-17ae-4595-8a16-a8ccd4de55da -> ../../sda7
lrwxrwxrwx 1 root root 10 2010-05-06 17:42 616fa3ab-5f9f-4ab0-bafb-5b6707931e95 -> ../../sda6
lrwxrwxrwx 1 root root 11 2010-05-06 17:43 84940750-819d-43af-bd18-ee8aceb2a2ca -> ../../loop0
lrwxrwxrwx 1 root root 10 2010-05-06 17:42 90583F28583F0D0A -> ../../sda5
lrwxrwxrwx 1 root root 10 2010-05-06 17:42 9417-721B -> ../../sda1
lrwxrwxrwx 1 root root 10 2010-05-06 17:42 F40842CF08429092 -> ../../sda2


pero' l'UUID del swap corrisponde! mi pare!
Avatar utente
Pingue_pinguino
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1514
Iscrizione: giovedì 24 novembre 2005, 17:52
Località: Valsusa

Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile

Messaggio da Pingue_pinguino »

Prova a commentare questa riga nel /etc/fstab

Codice: Seleziona tutto

none /proc/bus/usb usbfs devgid=1001,devmode=664 0 0
poi riavvia e vedi se almeno il primo errore si sistema.
pero' l'UUID del swap corrisponde! mi pare!
Anche a me pare. Forse l'errore è altrove.

Hai voglia di postare anche il /boot/grub/menu.lst?
andri2bajo
Prode Principiante
Messaggi: 26
Iscrizione: martedì 30 dicembre 2008, 18:20

Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile

Messaggio da andri2bajo »

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=616fa3ab-5f9f-4ab0-bafb-5b6707931e95 ro ROOTFLAGS=syncio

## default grub root device
## e.g. groot=(hd0,0)
# groot=616fa3ab-5f9f-4ab0-bafb-5b6707931e95

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##
title Ubuntu 10.04, kernel 2.6.32-22-generic
uuid 616fa3ab-5f9f-4ab0-bafb-5b6707931e95
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=616fa3ab-5f9f-4ab0-bafb-5b6707931e95 ro ROOTFLAGS=syncio quiet splash
initrd /boot/initrd.img-2.6.32-22-generic

title Ubuntu 9.10, kernel 2.6.32-22-generic (recovery mode)
uuid 616fa3ab-5f9f-4ab0-bafb-5b6707931e95
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=616fa3ab-5f9f-4ab0-bafb-5b6707931e95 ro ROOTFLAGS=syncio  single
initrd /boot/initrd.img-2.6.32-22-generic

title Ubuntu 9.10, kernel 2.6.31-21-generic
uuid 616fa3ab-5f9f-4ab0-bafb-5b6707931e95
kernel /boot/vmlinuz-2.6.31-21-generic root=UUID=616fa3ab-5f9f-4ab0-bafb-5b6707931e95 ro ROOTFLAGS=syncio quiet splash
initrd /boot/initrd.img-2.6.31-21-generic



title Ubuntu 9.10, memtest86+
uuid 616fa3ab-5f9f-4ab0-bafb-5b6707931e95
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root



# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
root (hd0,1)
savedefault
makeactive
chainloader +1
andri2bajo
Prode Principiante
Messaggi: 26
Iscrizione: martedì 30 dicembre 2008, 18:20

Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile

Messaggio da andri2bajo »

.
Avatar utente
Pingue_pinguino
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1514
Iscrizione: giovedì 24 novembre 2005, 17:52
Località: Valsusa

Re: da 9.10 a 1004LTS Montaggio /proc/bus/usb omesso xchè Plymouth non è disponibile

Messaggio da Pingue_pinguino »

Come immaginavo, l'errore è altrove.

Codice: Seleziona tutto

swapon -s
che ti dice?

L'altro errore si è sistemato?
Scrivi risposta

Ritorna a “Installazione e aggiornamento del sistema operativo”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 7 ospiti