"sensors: No sensors found!"

Riconoscimento, installazione e configurazione delle periferiche.
Sid Addir Babbai
Prode Principiante
Messaggi: 1
Iscrizione: martedì 1 giugno 2010, 15:50

"sensors: No sensors found!"

Messaggio da Sid Addir Babbai »

Salve a tutti, sono nuovo su Ubuntu ed ho un piccolo problema riguardante il sensore della temperatura.
Ho seguito tutta la procedura di installazione del sensore di temperatura (vedi http://www.lucidtips.com/2009/06/06/mon ... ntu-linux/). Altre guide riportano la stessa procedura. Tuttavia quello che accade se digito

Codice: Seleziona tutto

sensors
 da terminale è:

Codice: Seleziona tutto

No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
Se provo a fare

Codice: Seleziona tutto

sensors-detect
, dopo aver risposto YES a tutte le domande mi compare:

Codice: Seleziona tutto

Sorry, no supported PCI bus adapters found.

Sorry, no sensors were detected.
Either your system has no sensors, or they are not supported, or
they are connected to an I2C or SMBus adapter that is not
supported. If you find out what chips are on your board, check
http://www.lm-sensors.org/wiki/Devices for driver status.
Per finire l'outpu di:  :  

Codice: Seleziona tutto

 cat /proc/acpi/thermal_zone/*/temperature 


risulta:

Codice: Seleziona tutto

cat: /proc/acpi/thermal_zone/*/temperature: Nessun file o directory
Come posso risolvere questo problema?
Vi ringrazio in anticipo per la disponibilità!
Ultima modifica di Mdfalcubo il domenica 26 febbraio 2012, 19:15, modificato 1 volta in totale.
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: [Driver] titolo:"sensors: No sensors found!"

Messaggio da Alka-Seltzer PLUS »

hai dato

Codice: Seleziona tutto

sudo sensors-detect
invece di

Codice: Seleziona tutto

sensors-detect
?

Prova a ripetere la procedura seguendo la documentazione

http://wiki.ubuntu-it.org/AmministrazioneSistema/LmSensors?highlight=(lmsensors)
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
ubundu
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 833
Iscrizione: mercoledì 27 maggio 2009, 21:50

Re: [Driver] titolo:"sensors: No sensors found!"

Messaggio da ubundu »

io ho dato sudo sensors-detect ma non mi rileva alcun sensore, ho una amd e 350 con motherboard asus.
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: [Driver] titolo:"sensors: No sensors found!"

Messaggio da Alka-Seltzer PLUS »

Esegui nuovamente l' operazione e riporta l' output del terminale ( in codice !!! ) :)

PS: hai l' ACPI attivo nel bios ? ;)
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
ubundu
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 833
Iscrizione: mercoledì 27 maggio 2009, 21:50

Re: [Driver] titolo:"sensors: No sensors found!"

Messaggio da ubundu »

acpi attivato nel bios.

ho:
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Silicon Integrated Systems SIS5595...                      No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                  No
AMD Family 10h thermal sensors...                          No
AMD Family 11h thermal sensors...                          No
Intel Core family thermal sensor...                        No
Intel Atom thermal sensor...                                No
Intel AMB FB-DIMM thermal sensor...                        No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No


Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no):
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                    No


Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no):
Probing for `National Semiconductor LM78' at 0x290...      No
Probing for `National Semiconductor LM79' at 0x290...      No
Probing for `Winbond W83781D' at 0x290...                  No
Probing for `Winbond W83782D' at 0x290...                  No


Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `i2c-piix4' for device 0000:00:14.0: ATI Technologies Inc SB600/SB700/SB800 SMBus
Module i2c-dev loaded successfully.

Next adapter: SMBus PIIX4 adapter at 0b00 (i2c-0)

Next adapter: SMBus PIIX4 adapter at 0b00 (i2c-0)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x50
Probing for `Analog Devices ADM1033'...                    No
Probing for `Analog Devices ADM1034'...                    No
Probing for `SPD EEPROM'...                                No
Probing for `EDID EEPROM'...                                No
Client found at address 0x52
Probing for `Analog Devices ADM1033'...                    No
Probing for `Analog Devices ADM1034'...                    No
Probing for `SPD EEPROM'...                                No

Sorry, no sensors were detected.
Either your system has no sensors, or they are not supported, or
they are connected to an I2C or SMBus adapter that is not
supported. If you find out what chips are on your board, check
http://www.lm-sensors.org/wiki/Devices for driver status.
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: [Driver] titolo:"sensors: No sensors found!"

Messaggio da Alka-Seltzer PLUS »

( W il codice ... )

Beh, controlla che la tua scheda madre sia supportata nel sito:

http://www.lm-sensors.org/wiki/Devices

Per scoprire che scheda madre hai dai nel terminale:

Codice: Seleziona tutto

sudo dmidecode | grep Product
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Avatar utente
Diabolik62
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 16046
Iscrizione: domenica 20 dicembre 2009, 16:29
Distribuzione: wind 10049 archfce4.12

Re: [Driver] titolo:"sensors: No sensors found!"

Messaggio da Diabolik62 »

per conoscere scheda madre
sudo lshw > output
controlla in home output  le prime righe parlano della scheda
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 4 ospiti