[Wireless] Configurazione Wireless

Riconoscimento, installazione e configurazione delle periferiche.
giuseppevolo
Prode Principiante
Messaggi: 19
Iscrizione: mercoledì 16 giugno 2010, 17:31

[Wireless] Configurazione Wireless

Messaggio da giuseppevolo »

Ciao ragazzi!

Ho appena finito di installare il nuovo ubuntu 10.04 e mi stavo apprestando alla configurazione generale!
Il primo problema in cui mi sono riscontrato è stato quello della configurazione dei wireless, mi spiego meglio:

io possiedo un portatile fujitsu siemens amilo a1650g adesso formattato e con sistema operativo attuale linux ubuntu 10.04.
Il problema è che per poter collegare il pc ad internet devo usufruire della connessione wireless che risulta inattiva, cioè dovendola attivare tramite un pulsante non avviene nulla (normalmente tramite la pressione del pulsante si sarebbe accesa un lucina di color arancio) e quindi il computer rimane non connesso a internet.

Adesso chiedo a voi come posso ovviare questo problema!
Attendo risposta

Un saluto e grazie in anticipo!  ;)
glpiana
Rampante Reduce
Rampante Reduce
Messaggi: 5053
Iscrizione: martedì 10 aprile 2007, 9:40

Re: [Wireless] Configurazione Wireless

Messaggio da glpiana »

bisogna sapere che scheda monta il tuo pc. apri un terminale e scrivi:

lspci

poi coia tutto qui
giuseppevolo
Prode Principiante
Messaggi: 19
Iscrizione: mercoledì 16 giugno 2010, 17:31

Re: [Wireless] Configurazione Wireless

Messaggio da giuseppevolo »

ok sto postando tutto....

one moment....
giuseppevolo
Prode Principiante
Messaggi: 19
Iscrizione: mercoledì 16 giugno 2010, 17:31

Re: [Wireless] Configurazione Wireless

Messaggio da giuseppevolo »

Ecco quanto risulta:


00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
00:14.6 Modem: ATI Technologies Inc SB400 AC'97 Modem Controller (rev 02)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE)
02:05.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
02:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:09.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
02:09.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
02:09.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller

Quale potrebbe essere il problema?
glpiana
Rampante Reduce
Rampante Reduce
Messaggi: 5053
Iscrizione: martedì 10 aprile 2007, 9:40

Re: [Wireless] Configurazione Wireless

Messaggio da glpiana »

anzitutto devi collegarlo via cavo ethernet, fai gli aggiornamenti del caso e poi vai su sistema amministrazione driver hardware    dove troverai dei driver per la tua broadcom. li selezioni e glieli fai scaricare e installare. dopodichè la scheda dovrebbe funzionare.
giuseppevolo
Prode Principiante
Messaggi: 19
Iscrizione: mercoledì 16 giugno 2010, 17:31

Re: [Wireless] Configurazione Wireless

Messaggio da giuseppevolo »

Ho seguito le tue istruzioni e risultavano due driver non attivi; li ho scaricati e attivati.
Ho riavviato il pc ma il problema rimane.

Che fare?
glpiana
Rampante Reduce
Rampante Reduce
Messaggi: 5053
Iscrizione: martedì 10 aprile 2007, 9:40

Re: [Wireless] Configurazione Wireless

Messaggio da glpiana »

devi installarne o quanto meno metterne in uso, solo uno. puoi dirmi quali driver ti elenca?
giuseppevolo
Prode Principiante
Messaggi: 19
Iscrizione: mercoledì 16 giugno 2010, 17:31

Re: [Wireless] Configurazione Wireless

Messaggio da giuseppevolo »

Ne rileva due:

1) Broadcom B43 wireless driver
2) Modem software

Per il momento sono entrambi con il pallino verde e quindi attivi, perchè ho seguito le indicazioni datemi.

Che faccio?
giuseppevolo
Prode Principiante
Messaggi: 19
Iscrizione: mercoledì 16 giugno 2010, 17:31

Re: [Wireless] Configurazione Wireless

Messaggio da giuseppevolo »

Ragazzi c siete? Pleaseee
glpiana
Rampante Reduce
Rampante Reduce
Messaggi: 5053
Iscrizione: martedì 10 aprile 2007, 9:40

Re: [Wireless] Configurazione Wireless

Messaggio da glpiana »

vai su sistema amministrazione visualizzatore di ile di registro e copia il file dmesg
giuseppevolo
Prode Principiante
Messaggi: 19
Iscrizione: mercoledì 16 giugno 2010, 17:31

Re: [Wireless] Configurazione Wireless

Messaggio da giuseppevolo »

Ecco:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-22-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 (Ubuntu 2.6.32-22.36-generic 2.6.32.11+drm33.2)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
[    0.000000]  BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000037ea0000 (usable)
[    0.000000]  BIOS-e820: 0000000037ea0000 - 0000000037eaf000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000037eaf000 - 0000000037f00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.3 present.
[    0.000000] last_pfn = 0x37ea0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DBFFF uncachable
[    0.000000]   DC000-DFFFF write-protect
[    0.000000]   E0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 base 0038000000 mask FFF8000000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009b800 (usable)
[    0.000000]  modified: 000000000009b800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000d0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 0000000037ea0000 (usable)
[    0.000000]  modified: 0000000037ea0000 - 0000000037eaf000 (ACPI data)
[    0.000000]  modified: 0000000037eaf000 - 0000000037f00000 (ACPI NVS)
[    0.000000]  modified: 0000000037f00000 - 0000000040000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] RAMDISK: 2979f000 - 29f37d5a
[    0.000000] ACPI: RSDP 000f7ee0 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 37eaa4c0 00034 (v01 PTLTD    RSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 37eaedff 00074 (v01 FUJ    W37      06040000 W37  000F4240)
[    0.000000] ACPI: DSDT 37eaa4f4 0490B (v01 FUJ    W37      06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 37eaffc0 00040
[    0.000000] ACPI: SSDT 37eaee73 000F7 (v01 PTLTD  POWERNOW 06040000  LTP 00000001)
[    0.000000] ACPI: APIC 37eaef6a 0005A (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: MCFG 37eaefc4 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 6MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00008000 - 0000ef00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008d9e98]    TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[    0.000000]   #4 [002979f000 - 0029f37d5a]          RAMDISK ==> [002979f000 - 0029f37d5a]
[    0.000000]   #5 [000009b800 - 0000100000]    BIOS reserved ==> [000009b800 - 0000100000]
[    0.000000]   #6 [00008da000 - 00008dd138]              BRK ==> [00008da000 - 00008dd138]
[    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] found SMP MP-table at [c00f7f10] f7f10
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x00037ea0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009b
[    0.000000]     0: 0x00000100 -> 0x00037ea0
[    0.000000] On node 0 totalpages: 228919
[    0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3959 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 14 pages used for memmap
[    0.000000]   HighMem zone: 1684 pages, LIFO batch:0
[    0.000000] Using APIC driver default
[    0.000000] SB4X0 revision 0x11
[    0.000000] Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36024 r0 d21320 u4194304
[    0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227129
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=b5dbb0d2-7ae5-4249-a1a2-8baa778369b5 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 4580480 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:00037ea0)
[    0.000000] Memory: 886860k/916096k available (4673k kernel code, 28380k reserved, 2121k data, 656k init, 6792k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07a3000 - 0xc0847000   ( 656 kB)
[    0.000000]       .data : 0xc0590663 - 0xc07a2e48   (2121 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0590663   (4673 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:256
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 800.025 MHz processor.
[    0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 1600.05 BogoMIPS (lpj=3200100)
[    0.004046] Security Framework initialized
[    0.004091] AppArmor: AppArmor initialized
[    0.004108] Mount-cache hash table entries: 512
[    0.004340] Initializing cgroup subsys ns
[    0.004349] Initializing cgroup subsys cpuacct
[    0.004358] Initializing cgroup subsys memory
[    0.004375] Initializing cgroup subsys devices
[    0.004382] Initializing cgroup subsys freezer
[    0.004388] Initializing cgroup subsys net_cls
[    0.004422] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004429] CPU: L2 Cache: 128K (64 bytes/line)
[    0.004438] mce: CPU supports 5 MCE banks
[    0.004468] Performance Events: AMD PMU driver.
[    0.004483] ... version:                0
[    0.004487] ... bit width:              48
[    0.004492] ... generic registers:      4
[    0.004497] ... value mask:             0000ffffffffffff
[    0.004503] ... max period:             00007fffffffffff
[    0.004508] ... fixed-purpose events:   0
[    0.004513] ... event mask:             000000000000000f
[    0.004522] Checking 'hlt' instruction... OK.
[    0.021439] SMP alternatives: switching to UP code
[    0.035399] Freeing SMP alternatives: 19k freed
[    0.035434] ACPI: Core revision 20090903
[    0.048018] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.048031] ftrace: allocating 21771 entries in 43 pages
[    0.052143] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.052410]   alloc irq_desc for 21 on node 0
[    0.052416]   alloc kstat_irqs on node 0
[    0.052573] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.095424] CPU0: Mobile AMD Sempron(tm) Processor 3300+ stepping 02
[    0.096001] Brought up 1 CPUs
[    0.096001] Total of 1 processors activated (1600.05 BogoMIPS).
[    0.096001] CPU0 attaching NULL sched-domain.
[    0.096001] devtmpfs: initialized
[    0.096001] regulator: core version 0.5
[    0.096001] Time: 19:27:17  Date: 06/16/10
[    0.096001] NET: Registered protocol family 16
[    0.096001] EISA bus registered
[    0.096001] ACPI: bus type pci registered
[    0.096001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 1
[    0.096001] PCI: Not using MMCONFIG.
[    0.121310] PCI: PCI BIOS revision 2.10 entry at 0xfd6ac, last bus=2
[    0.121317] PCI: Using configuration type 1 for base access
[    0.123316] bio: create slab at 0
[    0.124555] ACPI: EC: Look up EC in DSDT
[    0.164139] ACPI: Interpreter enabled
[    0.164157] ACPI: (supports S0 S3 S4 S5)
[    0.164204] ACPI: Using IOAPIC for interrupt routing
[    0.164502] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 1
[    0.172399] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.172406] PCI: Using MMCONFIG for extended config space
[    0.205658] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    0.206023] ACPI: No dock devices found.
[    0.209554] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.209829] pci 0000:00:13.0: reg 10 32bit mmio: [0xc0000000-0xc0000fff]
[    0.209983] pci 0000:00:13.1: reg 10 32bit mmio: [0xc0001000-0xc0001fff]
[    0.210143] pci 0000:00:13.2: reg 10 32bit mmio: [0xc0002000-0xc0002fff]
[    0.210238] pci 0000:00:13.2: supports D1 D2
[    0.210245] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.210256] pci 0000:00:13.2: PME# disabled
[    0.210336] pci 0000:00:14.0: reg 10 io port: [0x8400-0x840f]
[    0.210352] pci 0000:00:14.0: reg 14 32bit mmio: [0xc0003000-0xc00033ff]
[    0.210406] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.210506] pci 0000:00:14.1: reg 10 io port: [0x8430-0x8437]
[    0.210524] pci 0000:00:14.1: reg 14 io port: [0x8424-0x8427]
[    0.210540] pci 0000:00:14.1: reg 18 io port: [0x8428-0x842f]
[    0.210556] pci 0000:00:14.1: reg 1c io port: [0x8420-0x8423]
[    0.210571] pci 0000:00:14.1: reg 20 io port: [0x8410-0x841f]
[    0.210838] pci 0000:00:14.5: reg 10 32bit mmio: [0xc0003400-0xc00034ff]
[    0.210985] pci 0000:00:14.6: reg 10 32bit mmio: [0xc0003800-0xc00038ff]
[    0.211291] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xc8000000-0xcfffffff]
[    0.211303] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff]
[    0.211315] pci 0000:01:05.0: reg 18 32bit mmio: [0xc0100000-0xc010ffff]
[    0.211336] pci 0000:01:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[    0.211355] pci 0000:01:05.0: supports D1 D2
[    0.211391] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[    0.211402] pci 0000:00:01.0: bridge 32bit mmio: [0xc0100000-0xc01fffff]
[    0.211414] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc8000000-0xcfffffff]
[    0.211484] pci 0000:02:05.0: reg 10 32bit mmio: [0xc0204000-0xc0205fff]
[    0.211632] pci 0000:02:07.0: reg 10 io port: [0xa000-0xa0ff]
[    0.211651] pci 0000:02:07.0: reg 14 32bit mmio: [0xc0208000-0xc02080ff]
[    0.211749] pci 0000:02:07.0: supports D1 D2
[    0.211756] pci 0000:02:07.0: PME# supported from D1 D2 D3hot D3cold
[    0.211770] pci 0000:02:07.0: PME# disabled
[    0.211850] pci 0000:02:09.0: reg 10 32bit mmio: [0x000000-0x000fff]
[    0.211895] pci 0000:02:09.0: supports D1 D2
[    0.211902] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.211915] pci 0000:02:09.0: PME# disabled
[    0.212019] pci 0000:02:09.2: reg 10 32bit mmio: [0xc0208800-0xc0208fff]
[    0.212037] pci 0000:02:09.2: reg 14 32bit mmio: [0xc0200000-0xc0203fff]
[    0.212137] pci 0000:02:09.2: supports D1 D2
[    0.212143] pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot
[    0.212155] pci 0000:02:09.2: PME# disabled
[    0.212233] pci 0000:02:09.3: reg 10 32bit mmio: [0xc0206000-0xc0207fff]
[    0.212339] pci 0000:02:09.3: supports D1 D2
[    0.212345] pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot
[    0.212357] pci 0000:02:09.3: PME# disabled
[    0.212439] pci 0000:00:14.4: transparent bridge
[    0.212454] pci 0000:00:14.4: bridge io port: [0xa000-0xafff]
[    0.212465] pci 0000:00:14.4: bridge 32bit mmio: [0xc0200000-0xc02fffff]
[    0.212530] pci_bus 0000:00: on NUMA node 0
[    0.212540] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.212818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.212984] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.218757] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[    0.218970] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[    0.219172] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[    0.219373] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[    0.219572] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[    0.219771] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[    0.219971] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[    0.220189] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[    0.220428] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.220439] vgaarb: loaded
[    0.220693] SCSI subsystem initialized
[    0.220828] libata version 3.00 loaded.
[    0.220981] usbcore: registered new interface driver usbfs
[    0.221011] usbcore: registered new interface driver hub
[    0.221068] usbcore: registered new device driver usb
[    0.221424] ACPI: WMI: Mapper loaded
[    0.221430] PCI: Using ACPI for IRQ routing
[    0.221760] NetLabel: Initializing
[    0.221766] NetLabel:  domain hash size = 128
[    0.221771] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.221799] NetLabel:  unlabeled traffic allowed by default
[    0.221882] Switching to clocksource tsc
[    0.224001] AppArmor: AppArmor Filesystem Enabled
[    0.224001] pnp: PnP ACPI init
[    0.224001] ACPI: bus type pnp registered
[    0.228556] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
[    0.234813] pnp: PnP ACPI: found 10 devices
[    0.234819] ACPI: ACPI bus type pnp unregistered
[    0.234828] PnPBIOS: Disabled by ACPI PNP
[    0.234856] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[    0.234864] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.234873] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.234893] system 00:08: ioport range 0x1080-0x1080 has been reserved
[    0.234901] system 00:08: ioport range 0x1200-0x120f has been reserved
[    0.234909] system 00:08: ioport range 0x40b-0x40b has been reserved
[    0.234916] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.234924] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[    0.234931] system 00:08: ioport range 0xc00-0xc01 has been reserved
[    0.234939] system 00:08: ioport range 0xc14-0xc14 has been reserved
[    0.234947] system 00:08: ioport range 0xc50-0xc52 has been reserved
[    0.234954] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[    0.234962] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[    0.234970] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[    0.234977] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[    0.234985] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[    0.234993] system 00:08: ioport range 0x8000-0x805f has been reserved
[    0.235001] system 00:08: ioport range 0xf40-0xf47 has been reserved
[    0.235009] system 00:08: ioport range 0x87f-0x87f has been reserved
[    0.235023] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[    0.235031] system 00:09: iomem range 0xfff80000-0xffffffff has been reserved
[    0.269992] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.270000] pci 0000:00:01.0:   IO window: 0x9000-0x9fff
[    0.270017] pci 0000:00:01.0:   MEM window: 0xc0100000-0xc01fffff
[    0.270028] pci 0000:00:01.0:   PREFETCH window: 0x000000c8000000-0x000000cfffffff
[    0.270056] pci 0000:02:09.0: CardBus bridge, secondary bus 0000:03
[    0.270062] pci 0000:02:09.0:   IO window: 0x00a400-0x00a4ff
[    0.270073] pci 0000:02:09.0:   IO window: 0x00a800-0x00a8ff
[    0.270084] pci 0000:02:09.0:   PREFETCH window: 0x40000000-0x43ffffff
[    0.270095] pci 0000:02:09.0:   MEM window: 0x44000000-0x47ffffff
[    0.270108] pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
[    0.270116] pci 0000:00:14.4:   IO window: 0xa000-0xafff
[    0.270131] pci 0000:00:14.4:   MEM window: 0xc0200000-0xc02fffff
[    0.270141] pci 0000:00:14.4:   PREFETCH window: 0x40000000-0x43ffffff
[    0.270188]   alloc irq_desc for 20 on node -1
[    0.270193]   alloc kstat_irqs on node -1
[    0.270206] pci 0000:02:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.270221] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.270228] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.270235] pci_bus 0000:01: resource 0 io:  [0x9000-0x9fff]
[    0.270242] pci_bus 0000:01: resource 1 mem: [0xc0100000-0xc01fffff]
[    0.270249] pci_bus 0000:01: resource 2 pref mem [0xc8000000-0xcfffffff]
[    0.270256] pci_bus 0000:02: resource 0 io:  [0xa000-0xafff]
[    0.270263] pci_bus 0000:02: resource 1 mem: [0xc0200000-0xc02fffff]
[    0.270270] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x43ffffff]
[    0.270277] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.270284] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.270291] pci_bus 0000:03: resource 0 io:  [0xa400-0xa4ff]
[    0.270298] pci_bus 0000:03: resource 1 io:  [0xa800-0xa8ff]
[    0.270304] pci_bus 0000:03: resource 2 pref mem [0x40000000-0x43ffffff]
[    0.270311] pci_bus 0000:03: resource 3 mem: [0x44000000-0x47ffffff]
[    0.270388] NET: Registered protocol family 2
[    0.270600] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.271382] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.272780] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.273490] TCP: Hash tables configured (established 131072 bind 65536)
[    0.273497] TCP reno registered
[    0.273672] NET: Registered protocol family 1
[    0.273703] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.273713] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[    0.706076] pci 0000:01:05.0: Boot video device
[    0.706442] cpufreq-nforce2: No nForce2 chipset.
[    0.706501] Scanning for low memory corruption every 60 seconds
[    0.706757] audit: initializing netlink socket (disabled)
[    0.706786] type=2000 audit(1276716437.706:1): initialized
[    0.731972] Trying to unpack rootfs image as initramfs...
[    0.758754] highmem bounce pool size: 64 pages
[    0.758769] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.764580] VFS: Disk quotas dquot_6.5.2
[    0.764732] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.767435] fuse init (API version 7.13)
[    0.767669] msgmni has been set to 1719
[    0.772861] alg: No test for stdrng (krng)
[    0.773057] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.773064] io scheduler noop registered
[    0.773069] io scheduler anticipatory registered
[    0.773074] io scheduler deadline registered
[    0.773176] io scheduler cfq registered (default)
[    0.773392] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.773443] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.787114] ACPI: AC Adapter [ADP1] (on-line)
[    0.787260] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.793361] ACPI: Lid Switch [LID0]
[    0.793521] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.793534] ACPI: Sleep Button [SLPB]
[    0.793665] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.793672] ACPI: Power Button [PWRF]
[    0.794043] Marking TSC unstable due to TSC halts in idle
[    0.794157] processor LNXCPU:00: registered as cooling_device0
[    0.803102] Switching to clocksource acpi_pm
[    0.869788] thermal LNXTHERM:01: registered as thermal_zone0
[    0.869812] ACPI: Thermal Zone [TZS0] (50 C)
[    0.897473] thermal LNXTHERM:02: registered as thermal_zone1
[    0.897499] ACPI: Thermal Zone [TZS2] (56 C)
[    0.904680] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.905310]   alloc irq_desc for 17 on node -1
[    0.905317]   alloc kstat_irqs on node -1
[    0.905331] serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.905345] serial 0000:00:14.6: PCI INT B disabled
[    0.907528] brd: module loaded
[    0.908262] isapnp: Scanning for PnP cards...
[    0.915617] loop: module loaded
[    0.915830] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    0.920410]   alloc irq_desc for 16 on node -1
[    0.920418]   alloc kstat_irqs on node -1
[    0.920432] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.920508] pata_acpi 0000:00:14.1: setting latency timer to 64
[    0.921216] Fixed MDIO Bus: probed
[    0.921299] PPP generic driver version 2.4.2
[    0.921421] tun: Universal TUN/TAP device driver, 1.6
[    0.921426] tun: (C) 1999-2004 Max Krasnyansky
[    0.921613] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.921654]   alloc irq_desc for 19 on node -1
[    0.921659]   alloc kstat_irqs on node -1
[    0.921673] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.921707] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    0.921777] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[    0.921878] ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0002000
[    0.965839] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    0.966086] usb usb1: configuration #1 chosen from 1 choice
[    0.966155] hub 1-0:1.0: USB hub found
[    0.966175] hub 1-0:1.0: 8 ports detected
[    0.966333] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.966370] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.966403] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    0.966493] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[    0.966531] ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0000000
[    1.064498] usb usb2: configuration #1 chosen from 1 choice
[    1.064567] hub 2-0:1.0: USB hub found
[    1.064595] hub 2-0:1.0: 4 ports detected
[    1.064715] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.064747] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    1.064839] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[    1.064878] ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0001000
[    1.151973] usb usb3: configuration #1 chosen from 1 choice
[    1.154058] hub 3-0:1.0: USB hub found
[    1.154093] hub 3-0:1.0: 4 ports detected
[    1.154237] uhci_hcd: USB Universal Host Controller Interface driver
[    1.154420] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.154837] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.154958] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.154980] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.155049] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.155100] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.155158] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.155457] mice: PS/2 mouse device common for all mice
[    1.157016] rtc_cmos 00:04: RTC can wake from S4
[    1.157157] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.157205] rtc0: alarms up to one month, 114 bytes nvram
[    1.157492] device-mapper: uevent: version 1.0.3
[    1.158864] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    1.160992] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.161231] device-mapper: multipath: version 1.1.0 loaded
[    1.161239] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.165464] EISA: Probing bus 0 at eisa.0
[    1.165482] Cannot allocate resource for EISA slot 1
[    1.165528] Cannot allocate resource for EISA slot 8
[    1.165533] EISA: Detected 0 cards.
[    1.165759] cpuidle: using governor ladder
[    1.165891] cpuidle: using governor menu
[    1.166949] TCP cubic registered
[    1.167307] NET: Registered protocol family 10
[    1.168392] lo: Disabled Privacy Extensions
[    1.169175] NET: Registered protocol family 17
[    1.169250] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3300+ processors (1 cpu cores) (version 2.20.00)
[    1.169334] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x8
[    1.169341] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xa
[    1.169347] powernow-k8:    2 : fid 0x8 (1600 MHz), vid 0xc
[    1.169354] powernow-k8:    3 : fid 0x0 (800 MHz), vid 0x18
[    1.200323] Using IPI No-Shortcut mode
[    1.200450] PM: Resume from disk failed.
[    1.200470] registered taskstats version 1
[    1.200790]   Magic number: 14:144:496
[    1.200907] rtc_cmos 00:04: setting system clock to 2010-06-16 19:27:18 UTC (1276716438)
[    1.200910] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.200912] EDD information not available.
[    1.440267] Freeing initrd memory: 7779k freed
[    1.493002] ACPI: Battery Slot [BAT0] (battery present)
[    1.536754] isapnp: No Plug & Play device found
[    1.536827] Freeing unused kernel memory: 656k freed
[    1.537616] Write protecting the kernel text: 4676k
[    1.537651] Write protecting the kernel read-only data: 1840k
[    1.563669] udev: starting version 151
[    1.788069] usb 3-2: new low speed USB device using ohci_hcd and address 2
[    1.813862] scsi0 : pata_atiixp
[    1.822224] scsi1 : pata_atiixp
[    1.823394] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14
[    1.823398] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15
[    1.847519] b43-pci-bridge 0000:02:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.904103] ssb: Sonics Silicon Backplane found on PCI device 0000:02:05.0
[    1.984873] ata1.00: ATA-6: ST9808210A, 3.05, max UDMA/100
[    1.984878] ata1.00: 156301488 sectors, multi 16: LBA48
[    1.986885] usb 3-2: configuration #1 chosen from 1 choice
[    2.004790] ata1.00: configured for UDMA/100
[    2.004931] scsi 0:0:0:0: Direct-Access     ATA      ST9808210A       3.05 PQ: 0 ANSI: 5
[    2.005114] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.005573] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    2.005619] sd 0:0:0:0: [sda] Write Protect is off
[    2.005623] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.005646] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.005808]  sda: sda1 sda2
[    2.057849] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.168618] ata2.00: ATAPI: HL-DT-ST DVD-RW GWA-4082N, CW02, max UDMA/33
[    2.184570] ata2.00: configured for UDMA/33
[    2.190354] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-RW GWA-4082N CW02 PQ: 0 ANSI: 5
[    2.202260] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    2.202265] Uniform CD-ROM driver Revision: 3.20
[    2.202626] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.202793] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.213497] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    2.213536] 8139cp 0000:02:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    2.216930] ohci1394 0000:02:09.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    2.226644] 8139too Fast Ethernet driver 0.9.28
[    2.230164] usbcore: registered new interface driver hiddev
[    2.237099] input: USB Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input5
[    2.237222] generic-usb 0003:04F3:0213.0001: input,hidraw0: USB HID v1.11 Mouse [USB Mouse] on usb-0000:00:13.1-2/input0
[    2.237260] usbcore: registered new interface driver usbhid
[    2.237264] usbhid: v2.6:USB HID core driver
[    2.272087] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[c0208800-c0208fff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    2.272373]   alloc irq_desc for 23 on node -1
[    2.272377]   alloc kstat_irqs on node -1
[    2.272385] 8139too 0000:02:07.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.274008] eth0: RealTek RTL8139 at 0xa000, 00:0a:e4:ac:8e:39, IRQ 23
[    2.628595] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    3.544214] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000ae4053610353d]
[    4.693060] Adding 2621432k swap on /dev/sda5.  Priority:-1 extents:1 across:2621432k
[    4.976362] udev: starting version 151
[    6.292731] type=1505 audit(1276709243.591:2):  operation="profile_load" pid=455 name="/sbin/dhclient3"
[    6.293027] type=1505 audit(1276709243.591:3):  operation="profile_load" pid=455 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[    6.293189] type=1505 audit(1276709243.591:4):  operation="profile_load" pid=455 name="/usr/lib/connman/scripts/dhclient-script"
[    6.478723] Linux agpgart interface v0.103
[    6.612714] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.682139] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8400, revision 0
[    7.060695] lp: driver loaded but no devices found
[    7.174747] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:1a/LNXVIDEO:01/input/input6
[    7.174967] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[    7.623487] [drm] Initialized drm 1.1.0 20060810
[    7.793117] yenta_cardbus 0000:02:09.0: CardBus bridge found [1734:1092]
[    7.793146] yenta_cardbus 0000:02:09.0: Using CSCINT to route CSC interrupts to PCI
[    7.793149] yenta_cardbus 0000:02:09.0: Routing CardBus interrupts to PCI
[    7.793158] yenta_cardbus 0000:02:09.0: TI: mfunc 0x010a1b22, devctl 0x64
[    8.024990] yenta_cardbus 0000:02:09.0: ISA IRQ mask 0x0ef8, PCI irq 20
[    8.024997] yenta_cardbus 0000:02:09.0: Socket status: 30000006
[    8.025002] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[    8.025015] yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[    8.025019] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xafff: clean.
[    8.025290] yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
[    8.025294] yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
[    8.058047] tifm_7xx1 0000:02:09.3: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    8.200295] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x92a0b1, caps: 0xa04713/0x200000
[    8.230793] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[    8.778534] [drm] radeon defaulting to kernel modesetting.
[    8.778541] [drm] radeon kernel modesetting enabled.
[    8.778631] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    8.788834] [drm] radeon: Initializing kernel modesetting.
[    8.791774] [drm] register mmio base: 0xC0100000
[    8.791778] [drm] register mmio size: 65536
[    8.792136] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[    8.792486] [drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?)
[    8.792538] [drm] Generation 2 PCI interface, using max accessible memory
[    8.792541] [drm] radeon: VRAM 128M
[    8.792543] [drm] radeon: VRAM from 0x38000000 to 0x3FFFFFFF
[    8.792545] [drm] radeon: GTT 32M
[    8.792547] [drm] radeon: GTT from 0x40000000 to 0x41FFFFFF
[    8.792597] [drm] radeon: irq initialized.
[    8.792683] [drm] Detected VRAM RAM=128M, BAR=128M
[    8.792688] [drm] RAM width 128bits DDR
[    8.794057] [TTM] Zone  kernel: Available graphics memory: 444478 kiB.
[    8.794061] [TTM] Zone highmem: Available graphics memory: 447874 kiB.
[    8.794085] [drm] radeon: 128M of VRAM memory ready
[    8.794087] [drm] radeon: 32M of GTT memory ready.
[    8.794109] [drm] GART: num cpu pages 8192, num gpu pages 8192
[    8.794566] [drm] radeon: 3 quad pipes, 1 z pipes initialized.
[    8.794585] [drm] radeon: cp idle (0x10000C03)
[    8.794747] [drm] Loading R300 Microcode
[    8.795175] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[    8.953107] [drm] radeon: ring at 0x0000000040000000
[    8.953131] [drm] ring test succeeded in 2 usecs
[    8.953281] [drm] radeon: ib pool ready.
[    8.953357] [drm] ib test succeeded in 0 usecs
[    8.953403] [drm] Default TV standard: NTSC
[    8.953405] [drm] 14.318180000 MHz TV ref clk
[    8.953493] [drm] Panel ID String: CPT                    
[    8.953496] [drm] Panel Size 1280x800
[    8.953542] [drm] Default TV standard: NTSC
[    8.953544] [drm] 14.318180000 MHz TV ref clk
[    8.953571] [drm] Radeon Display Connectors
[    8.953573] [drm] Connector 0:
[    8.953575] [drm]   VGA
[    8.953577] [drm]   DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[    8.953579] [drm]   Encoders:
[    8.953580] [drm]     CRT1: INTERNAL_DAC2
[    8.953582] [drm] Connector 1:
[    8.953584] [drm]   LVDS
[    8.953586] [drm]   DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4
[    8.953588] [drm]   Encoders:
[    8.953590] [drm]     LCD1: INTERNAL_LVDS
[    8.953591] [drm] Connector 2:
[    8.953593] [drm]   S-video
[    8.953594] [drm]   Encoders:
[    8.953595] [drm]     TV1: INTERNAL_DAC2
[    9.009731] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[    9.012477] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[    9.013503] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[    9.014349] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[    9.015250] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[    9.120543] [drm] fb mappable at 0xC8040000
[    9.120546] [drm] vram apper at 0xC8000000
[    9.120548] [drm] size 4096000
[    9.120550] [drm] fb depth is 24
[    9.120552] [drm]    pitch is 5120
[    9.127151] fb0: radeondrmfb frame buffer device
[    9.127155] registered panic notifier
[    9.127163] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
[    9.195316] vga16fb: initializing
[    9.195324] vga16fb: mapped to 0xc00a0000
[    9.195330] vga16fb: not registering due to another framebuffer present
[    9.660646] ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    9.772084] MC'97 1 converters and GPIO not ready (0xff00)
[    9.774366] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   10.052605] Console: switching to colour frame buffer device 160x50
[   12.498557] type=1505 audit(1276709249.797:5):  operation="profile_load" pid=749 name="/usr/share/gdm/guest-session/Xsession"
glpiana
Rampante Reduce
Rampante Reduce
Messaggi: 5053
Iscrizione: martedì 10 aprile 2007, 9:40

Re: [Wireless] Configurazione Wireless

Messaggio da glpiana »

digita:
sudo iwlist scan

e copia quanto esce.
giuseppevolo
Prode Principiante
Messaggi: 19
Iscrizione: mercoledì 16 giugno 2010, 17:31

Re: [Wireless] Configurazione Wireless

Messaggio da giuseppevolo »

lory@lory-laptop:~$ sudo
usage: sudo -h | -K | -k | -L | -V
usage: sudo -v [-AknS] [-p prompt]
usage: sudo -l[l] [-AknS] [-g groupname|#gid] [-p prompt] [-U username] [-u
            username|#uid] [-g groupname|#gid] [command]
usage: sudo [-AbEHknPS] [-C fd] [-g groupname|#gid] [-p prompt] [-u
            username|#uid] [-g groupname|#gid] [VAR=value] [-i|-s] []
usage: sudo -e [-AknS] [-C fd] [-g groupname|#gid] [-p prompt] [-u
            username|#uid] file ...
lory@lory-laptop:~$ iwlist
Usage: iwlist [interface] scanning [essid NNN] [last]
              [interface] frequency
              [interface] channel
              [interface] bitrate
              [interface] rate
              [interface] encryption
              [interface] keys
              [interface] power
              [interface] txpower
              [interface] retry
              [interface] ap
              [interface] accesspoints
              [interface] peers
              [interface] event
              [interface] auth
              [interface] wpakeys
              [interface] genie
              [interface] modulation
lory@lory-laptop:~$ scan
Il programma "scan" può essere trovato nei seguenti pacchetti:
* dvb-apps
* mailutils-mh
* nmh
Provare: sudo apt-get install
lory@lory-laptop:~$

Esiste una soluzione a questo problema?
glpiana
Rampante Reduce
Rampante Reduce
Messaggi: 5053
Iscrizione: martedì 10 aprile 2007, 9:40

Re: [Wireless] Configurazione Wireless

Messaggio da glpiana »

è un comando solo: sudo iwlist scan
giuseppevolo
Prode Principiante
Messaggi: 19
Iscrizione: mercoledì 16 giugno 2010, 17:31

Re: [Wireless] Configurazione Wireless

Messaggio da giuseppevolo »

lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

wlan0    Interface doesn't support scanning : Network is down
Avatar utente
pablo_honey
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1019
Iscrizione: lunedì 9 novembre 2009, 13:09
Desktop: Kde
Distribuzione: Debian Testing i686
Località: Italian East Coast

Re: [Wireless] Configurazione Wireless

Messaggio da pablo_honey »

devi attivare il wifi con il comando

Codice: Seleziona tutto

sudo ifconfig wlan0 up
You can't always get what you want [Mick Jagger]
giuseppevolo
Prode Principiante
Messaggi: 19
Iscrizione: mercoledì 16 giugno 2010, 17:31

Re: [Wireless] Configurazione Wireless

Messaggio da giuseppevolo »

mi dà questo errore:

lory@lory-laptop:~$ sudo ifconfig wlan0 up
[sudo] password for lory:
SIOCSIFFLAGS: Errore sconosciuto 132
lory@lory-laptop:~$
Avatar utente
pablo_honey
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1019
Iscrizione: lunedì 9 novembre 2009, 13:09
Desktop: Kde
Distribuzione: Debian Testing i686
Località: Italian East Coast

Re: [Wireless] Configurazione Wireless

Messaggio da pablo_honey »

You can't always get what you want [Mick Jagger]
giuseppevolo
Prode Principiante
Messaggi: 19
Iscrizione: mercoledì 16 giugno 2010, 17:31

Re: [Wireless] Configurazione Wireless

Messaggio da giuseppevolo »

non funziona..
Avatar utente
scolpi
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 4504
Iscrizione: giovedì 8 maggio 2008, 19:54
Località: Folgaria (Trento)
Contatti:

Re: [Wireless] Configurazione Wireless

Messaggio da scolpi »

posta

Codice: Seleziona tutto

rfkill list
e poi

Codice: Seleziona tutto

sudo lshw -C network
Acquista il nuovo cd postumo, solo 10 euro e tutti in beneficienza, per info:  www.valentinagiovagnini.it
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 4 ospiti