Quando io tento di connettermi sembra tutto normale, i driver della penna usb sono installati, visualizzo le connessioni ma quando cerco di connettermi mi esce una finestra con su scritto:
"Enter password for keyring 'Default' to unlock Linux"
io inserisco il codice wi fi e poi mi fa procedere e mi RIchiede il codice wi fi stavolta facendomi selezionare la chiave WPA e WEP anche se mi compare solo quella WPA che attualmente uso
Il pc tenta di connettersi ma non ci riesce e continua a chiedermi la chiave WPA, il fatto strano è che la chiave è giusta perchè sullo stesso PC dove ho installato pure vista va così come sull' altro notebooke con XP
Ho già fatto parecchi tentativi l' ultimo?
Eccolo:
- Codice: Seleziona tutto
sudo gedit /etc/sysctl.conf
- Codice: Seleziona tutto
#
# /etc/sysctl.conf - Configuration file for setting system variables
# See /etc/sysctl.d/ for additional system variables.
# See sysctl.conf (5) for information.
#
#kernel.domainname = example.com
# Uncomment the following to stop low-level messages on console
#kernel.printk = 4 4 1 7
##############################################################3
# Functions previously found in netbase
#
# Uncomment the next two lines to enable Spoof protection (reverse-path filter)
# Turn on Source Address Verification in all interfaces to
# prevent some spoofing attacks
#net.ipv4.conf.default.rp_filter=1
#net.ipv4.conf.all.rp_filter=1
# Uncomment the next line to enable TCP/IP SYN cookies
# This disables TCP Window Scaling (http://lkml.org/lkml/2008/2/5/167),
# and is not recommended.
#net.ipv4.tcp_syncookies=1
# Uncomment the next line to enable packet forwarding for IPv4
#net.ipv4.ip_forward=1
# Uncomment the next line to enable packet forwarding for IPv6
#net.ipv6.conf.all.forwarding=1
###################################################################
# Additional settings - these settings can improve the network
# security of the host and prevent against some network attacks
# including spoofing attacks and man in the middle attacks through
# redirection. Some network environments, however, require that these
# settings are disabled so review and enable them as needed.
#
# Ignore ICMP broadcasts
#net.ipv4.icmp_echo_ignore_broadcasts = 1
#
# Ignore bogus ICMP errors
#net.ipv4.icmp_ignore_bogus_error_responses = 1
#
# Do not accept ICMP redirects (prevent MITM attacks)
#net.ipv4.conf.all.accept_redirects = 0
#net.ipv6.conf.all.accept_redirects = 0
# _or_
# Accept ICMP redirects only for gateways listed in our default
# gateway list (enabled by default)
# net.ipv4.conf.all.secure_redirects = 1
#
# Do not send ICMP redirects (we are not a router)
#net.ipv4.conf.all.send_redirects = 0
#
# Do not accept IP source route packets (we are not a router)
#net.ipv4.conf.all.accept_source_route = 0
#net.ipv6.conf.all.accept_source_route = 0
#
# Log Martian Packets
#net.ipv4.conf.all.log_martians = 1
#
# The contents of /proc/<pid>/maps and smaps files are only visible to
# readers that are allowed to ptrace() the process
# kernel.maps_protect = 1
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_window_scaling = 0
net.ipv4.tcp_ecn= 0
Potete aiutarmi?
Grazie in anticipo :)
