Sensori e Ventola

Riconoscimento, installazione e configurazione delle periferiche.
Nomak87
Prode Principiante
Messaggi: 36
Iscrizione: domenica 16 maggio 2010, 14:38

Sensori e Ventola

Messaggio da Nomak87 »

Ho installato Ubuntu 10.04 Netbook edition su un HannsNote della Hannspree.

Ho un problema con la rotazione della ventola che dopo poco che il Netbook è acceso rimane sempre a palla!!

Ho provato a seguire la guida ufficiale per lm sensors, non l'ho capita molto bene!! Cmq seguendola ho sempre risposto "yes" alle domande e dopo il riavvio ora mi appaiono 4 temperature come si vede dalla foto
Immagine

Penso che la ventola del mio Netbook sia sempre a palla perché si tara sulla prima temperatura, che non ho idea di cosa sia anche se passando sopra con il mouse mi dice CPU, mentre la temperatura reale del processore sono le ultime due, cioè Core0 e Core1... giusto?

Come faccio e fargli capire che deve settarsi sulla temperatura rivelata da quei sensori? e non dal primo?
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: Sensori e Ventola

Messaggio da Alka-Seltzer PLUS »

Ciao !

Devi configurare "fancontrol": trovi come fare nella stessa guida che hai precedentemente seguito, più in basso.
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Nomak87
Prode Principiante
Messaggi: 36
Iscrizione: domenica 16 maggio 2010, 14:38

Re: Sensori e Ventola

Messaggio da Nomak87 »

Questo è il testo che ho all'interno del file /etc/init.d/fancontrol

Codice: Seleziona tutto

#! /bin/sh

### BEGIN INIT INFO
# Provides:          fancontrol
# Required-Start:    $remote_fs
# Required-Stop:     $remote_fs
# Default-Start:     2 3 4 5
# Default-Stop:
# Short-Description: fancontrol
# Description:       fan speed regulator
### END INIT INFO

. /lib/lsb/init-functions

[ -f /etc/default/rcS ] && . /etc/default/rcS
PATH=/bin:/usr/bin:/sbin:/usr/sbin
DAEMON=/usr/sbin/fancontrol
DESC="fan speed regulator"
NAME="fancontrol"
PIDFILE=/var/run/fancontrol.pid
CONF=/etc/fancontrol

test -x $DAEMON || exit 0

case "$1" in
  start)
  	if [ -f $CONF ] && [ -n "`grep INTERVAL $CONF | cut -d= -f2`" ]; then
		if [ -n "`grep DEVPATH $CONF | cut -d= -f2`" ] && [ -n "`grep DEVNAME $CONF | cut -d= -f2`" ] ; then
			log_daemon_msg "Starting $DESC" "$NAME"
			start-stop-daemon --start --quiet --background --pidfile $PIDFILE --startas $DAEMON
			log_end_msg $?
		else
			log_failure_msg "Not starting fancontrol, outdated configuration file; please re-run pwmconfig."
		fi
	else
		if [ "$VERBOSE" != no ]; then
			log_warning_msg "Not starting fancontrol; run pwmconfig first."
		fi
	fi
	;;
  stop)
	log_daemon_msg "Stopping $DESC" "$NAME"
	start-stop-daemon --stop --quiet --pidfile $PIDFILE --oknodo --startas $DAEMON
	rm -f $PIDFILE
	log_end_msg $?
	;;
  restart)
  	$0 stop
	sleep 3
	$0 start
	;;
  force-reload)
	if start-stop-daemon --stop --test --quiet --pidfile $PIDFILE --startas $DAEMON ; then
		$0 restart
	fi
	;;
  status)
	status_of_proc $DAEMON $NAME && exit 0 || exit $?
	;;
  *)
	log_success_msg "Usage: /etc/init.d/fancontrol {start|stop|restart|force-reload|status}"
	exit 1
	;;
esac

exit 0
Cosa faccio? Lo modifico pari pari come dice nella guida?
Nel caso di risposta affermativa come posso modificarlo dato che mi dice che il file è in sola lettura? Devo farlo da terminale con Sudo per ottenere i privilegi di amministratore? Potresti dirmi il comando esatto?
Grazie :)
Ultima modifica di Nomak87 il venerdì 2 luglio 2010, 0:29, modificato 1 volta in totale.
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: Sensori e Ventola

Messaggio da Alka-Seltzer PLUS »

uhm .. non so cosa dica la guida ma ti dico come ho fatto io in precedenza: ho fatto girare il programma di configurazione parecchie volte per testarne l' efficacia e settando i parametri più volte ( = silenzio quando le temperature sono basse, una bella sventolata quando le temperature si innalzavano ... ).

Dipende da come vuoi che funzionino le ventole alla fine ... al massimo, se non vuoi "sbatterti" e se hai una utility apposita nel bios, usa quella :)
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Nomak87
Prode Principiante
Messaggi: 36
Iscrizione: domenica 16 maggio 2010, 14:38

Re: Sensori e Ventola

Messaggio da Nomak87 »

Ho aggiornato il BIOS ma purtroppo la sperata utility non è apparsa :(

Dando il comandao sudo pwmconfig il responso è il seguente:

/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed

Vuol dire che è proprio il mio Netbook che non è compatibile?

Cmq almeno ho imparato ad eseguire gedit nel terminale così posso usare i file con privilegi di amministratore... Il rumore c'è ma si avverte solo la sera quando fuori c'è silenzio, durante il giorno non si sente neanche... è probabile che il fatto che non si fermi mai sia dovuto alla temperatura estiva, dovrei riprofare a far girare win7 e vedere se anche lui la tiene sempre accesa, però non ho testa di reinstallare tutto  :)
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: Sensori e Ventola

Messaggio da Alka-Seltzer PLUS »

Quando hai dato

Codice: Seleziona tutto

sudo sensors-detect
verso la fine hai detto allo script di scrivere i moduli da caricare ?
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Nomak87
Prode Principiante
Messaggi: 36
Iscrizione: domenica 16 maggio 2010, 14:38

Re: Sensori e Ventola

Messaggio da Nomak87 »

ho digitato sempre yes :)
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: Sensori e Ventola

Messaggio da Alka-Seltzer PLUS »

Uhm ... posta il contenuto di

Codice: Seleziona tutto

/etc/modules
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Nomak87
Prode Principiante
Messaggi: 36
Iscrizione: domenica 16 maggio 2010, 14:38

Re: Sensori e Ventola

Messaggio da Nomak87 »

Codice: Seleziona tutto

# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

lp

# Generated by sensors-detect on Sun Jun 27 23:39:06 2010
# Chip drivers
coretemp

# Generated by sensors-detect on Sun Jun 27 23:42:25 2010
# Chip drivers
coretemp

# Generated by sensors-detect on Sun Jun 27 23:44:13 2010
# Chip drivers
coretemp

# Generated by sensors-detect on Mon Jun 28 17:57:08 2010
# Chip drivers
coretemp

# Generated by sensors-detect on Wed Jun 30 00:45:02 2010
# Chip drivers
coretemp

# Generated by sensors-detect on Wed Jun 30 14:29:35 2010
# Chip drivers
coretemp
Eccolo qui :)
Ci capisci qualcosa? :)
Ultima modifica di Nomak87 il venerdì 2 luglio 2010, 0:29, modificato 1 volta in totale.
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: Sensori e Ventola

Messaggio da Alka-Seltzer PLUS »

Sì: che hai dato

Codice: Seleziona tutto

sudo sensors-detect
almeno 6 volte ;D

Fai in modo che il file appaia così:

Codice: Seleziona tutto

# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

lp

# Generated by sensors-detect on Sun Jun 27 23:39:06 2010
# Chip drivers
coretemp
invece di così:

Codice: Seleziona tutto

# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

lp

# Generated by sensors-detect on Sun Jun 27 23:39:06 2010
# Chip drivers
coretemp

# Generated by sensors-detect on Sun Jun 27 23:42:25 2010
# Chip drivers
coretemp

# Generated by sensors-detect on Sun Jun 27 23:44:13 2010
# Chip drivers
coretemp

# Generated by sensors-detect on Mon Jun 28 17:57:08 2010
# Chip drivers
coretemp

# Generated by sensors-detect on Wed Jun 30 00:45:02 2010
# Chip drivers
coretemp

# Generated by sensors-detect on Wed Jun 30 14:29:35 2010
# Chip drivers
coretemp
Poi dai nuovamente

Codice: Seleziona tutto

sudo sensors-detect
e quando verso la fine ti chiede se aggiungere i moduli da caricare in "/etc/modules" gli rispondi di NO.

Poi posta ( in codice !!!!!!!!!! ) tutto ciò che appare nel terminale durante la procedura di rilevamento dei sensori ( cioè tutto quello che succede quando dai il comando "sudo sensors-detect" ), ok ?
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Nomak87
Prode Principiante
Messaggi: 36
Iscrizione: domenica 16 maggio 2010, 14:38

Re: Sensori e Ventola

Messaggio da Nomak87 »

Intanto grazie mille per l'aiuto e il tempo che mi stai dedicando...

Allora per modificare il file etc/modules digito da terminale

Codice: Seleziona tutto

sudo gedit etc/modules
giusto? e copio esattamente come m'hai scritto tu, ok?
Nomak87
Prode Principiante
Messaggi: 36
Iscrizione: domenica 16 maggio 2010, 14:38

Re: Sensori e Ventola

Messaggio da Nomak87 »

Dato che ero abbastanza sicuro ho eseguito anche il resto delle istruzioni... spero di aver fatto bene :)
Allora questo è quello che succede quando do il comando...

Codice: Seleziona tutto

michelangelo@michelangelo-laptop:~$ sudo sensors-detect
# sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
# System: HANNspree SN10E100

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): yes
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
Intel Core family thermal sensor...                         No
Intel Atom thermal sensor...                                Success!
    (driver `coretemp')
Intel AMB FB-DIMM thermal sensor...                         No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): yes
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No

Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): yes
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): yes
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): yes
Using driver `i2c-i801' for device 0000:00:1f.3: Intel 82801G ICH7
Module i2c-i801 loaded successfully.
Module i2c-dev loaded successfully.

Next adapter: intel drm CRTDDC_A (i2c-0)
Do you want to scan it? (YES/no/selectively): yes

Next adapter: intel drm LVDSDDC_C (i2c-1)
Do you want to scan it? (YES/no/selectively): yes
Client found at address 0x50
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No
Probing for `EDID EEPROM'...                                Yes
    (confidence 8, not a hardware monitoring chip)

Next adapter: SMBus I801 adapter at e000 (i2c-2)
Do you want to scan it? (YES/no/selectively): yes
Client found at address 0x51
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 Yes
    (confidence 8, not a hardware monitoring chip)

Now follows a summary of the probes I have just done.
Just press ENTER to continue: 

Driver `coretemp':
  * Chip `Intel Atom thermal sensor' (confidence: 9)

To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
coretemp
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!

Do you want to add these lines automatically to /etc/modules? (yes/NO)NO

Unloading i2c-dev... OK
Unloading i2c-i801... OK

michelangelo@michelangelo-laptop:~$ 
Illuminami :)
Grazie davvero ;)
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: Sensori e Ventola

Messaggio da Alka-Seltzer PLUS »

Non ne sono sicuro ma credo che tu debba aggiungere questi due moduli:
i2c-dev
i2c-i801
dai il comando

Codice: Seleziona tutto

gksudo gedit /etc/modules
ed aggiungi le righe:
# moduli forse necessari per far girare fancontrol
i2c-dev
i2c-i801
e riavvia incrociando le dita.

Successivamente prova di nuovo a far partire fancontrol :)
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Avatar utente
Sheldon Cooper
Prode Principiante
Messaggi: 10
Iscrizione: mercoledì 30 giugno 2010, 17:02

[Supporto] Re: Sensori e Ventola

Messaggio da Sheldon Cooper »

Già che ci siete potete dare una mano anche a me? :'(
Ho la ventola che rimane sempre al minimo, con conseguente aumento di temperature (rispetto a win almeno 10 gradi)
Penso che non sia riconosciuta proprio dal sistema, anche perchè digitando dal terminale pwmconfig, tra le altre cose mi dice:
"/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed"

Cosa posso fare???
Ultima modifica di Sheldon Cooper il mercoledì 30 giugno 2010, 17:30, modificato 1 volta in totale.
Asus F3JA-AP022H
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: Sensori e Ventola

Messaggio da Alka-Seltzer PLUS »

Ciao !

Leggiti la guida su "lmsensors" che trovi nella documentazione e poi cerca di seguirla !

Al massimo apri una discussione nuova e linkala qui :)
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Avatar utente
Sheldon Cooper
Prode Principiante
Messaggi: 10
Iscrizione: mercoledì 30 giugno 2010, 17:02

Re: Sensori e Ventola

Messaggio da Sheldon Cooper »

Grazie un milione...faccio ancora qualche ricerca e poi al limite apro una discussione ;-)
Asus F3JA-AP022H
Nomak87
Prode Principiante
Messaggi: 36
Iscrizione: domenica 16 maggio 2010, 14:38

Re: Sensori e Ventola

Messaggio da Nomak87 »

Ho modificato il file /etc/modules che ora è così

Codice: Seleziona tutto

# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

lp

# Generated by sensors-detect on Sun Jun 27 23:39:06 2010
# Chip drivers
coretemp

# moduli forse necessari per far girare fancontrol
i2c-dev
i2c-i801
Ho riavviato
Poi sono andato su terminale è ho digitato questo:

Codice: Seleziona tutto

michelangelo@michelangelo-laptop:~$ sudo pwmconfig
[sudo] password for michelangelo: 
# pwmconfig revision 5770 (2009-09-16)
This program will search your sensors for pulse width modulation (pwm)
controls, and test each one to see if it controls a fan on
your motherboard. Note that many motherboards do not have pwm
circuitry installed, even if your sensor chip supports pwm.

We will attempt to briefly stop each fan using the pwm controls.
The program will attempt to restore each fan to full speed
after testing. However, it is ** very important ** that you
physically verify that the fans have been to full speed
after the program has completed.

/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed
michelangelo@michelangelo-laptop:~$ 
Non è cambiato nulla :(
Ultima modifica di Nomak87 il venerdì 2 luglio 2010, 0:28, modificato 1 volta in totale.
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: Sensori e Ventola

Messaggio da Alka-Seltzer PLUS »

Quella ha a che fare con l' orologio: sembra che non sia installato quindi non riesce a metterla sul pannello.

Per quanto riguarda il fancontrol ricordo che tempo addietro, affinché riuscissi a farlo funzionare, ho dovuto disabilitare il controllo delle ventole da parte del BIOS ;)
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Nomak87
Prode Principiante
Messaggi: 36
Iscrizione: domenica 16 maggio 2010, 14:38

Re: Sensori e Ventola

Messaggio da Nomak87 »

Alka-Seltzer PLUS ha scritto: Quella ha a che fare con l' orologio: sembra che non sia installato quindi non riesce a metterla sul pannello.

Per quanto riguarda il fancontrol ricordo che tempo addietro, affinché riuscissi a farlo funzionare, ho dovuto disabilitare il controllo delle ventole da parte del BIOS ;)
Da BIOS non ho nessuna opzione... Per il resto avrei configurato tutto giusto? Avevo dei dubbi su modules: uno della scritta in italiano e due non sapevo a che "altezza" dovessi metterlo...

Ora riprovo a spulciare il BIOS ma è talmente inutile che non credo di essermi perso l'uility per la gestione delle ventole... Può essere che è nascosta? In tal caso esiste un modo per renderla visibile?
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: Sensori e Ventola

Messaggio da Alka-Seltzer PLUS »

No, non può essere nascosta, al massimo è in "culonia" ( <- scusa la scurrilità ) ;D

In quel tipo di file tutto ciò che è presente in una riga contenente un "#" all' inizio viene ignorato :)
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: Google [Bot] e 10 ospiti