[Server] Scanner di rete

Riconoscimento, installazione e configurazione delle periferiche.
Avatar utente
andrew892
Prode Principiante
Messaggi: 72
Iscrizione: sabato 28 giugno 2008, 12:12

[Server] Scanner di rete

Messaggio da andrew892 »

Salve a tutti,
Ho un home server con ubuntu 10.04 a cui è collegata una stampante multifunzionale HP.
Ho problemi a far rilevare lo scanner.
La parte da stampante invece funziona egregiamente anche in rete.

I comandi che ho dato sono:

Codice: Seleziona tutto

andrea@andrea-server:~$ scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

Codice: Seleziona tutto

andrea@andrea-server:~$ sane-find-scanner 

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x03f0, product=0x5611) at libusb:001:002
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.

Codice: Seleziona tutto

andrea@andrea-server:~$ sudo scanimage -L
[sudo] password for andrea: 
device `hpaio:/usb/Photosmart_C3100_series?serial=CN75UCB0C204P9' is a Hewlett-Packard Photosmart_C3100_series all-in-one
è un problema di permessi, dato che con sudo il comando scanimage mi vede il dispositivo?

Grazie!
Avatar utente
ethyl
Rampante Reduce
Rampante Reduce
Messaggi: 7766
Iscrizione: venerdì 19 gennaio 2007, 16:31

Re: [Server] Scanner di rete

Messaggio da ethyl »

aggiungi l'utente andrea al gruppo scanner.
Avatar utente
andrew892
Prode Principiante
Messaggi: 72
Iscrizione: sabato 28 giugno 2008, 12:12

Re: [Server] Scanner di rete

Messaggio da andrew892 »

Scusa se ti rispondo solo ora ma non mi è arrivata la notifica via email...
cmq l'ho fatto ma non ho risolto...

comunque ho notato che se io cambio i permessi in 666 ai file 001 e 002 in /dev/bus/usb/001/ riesco ad usare lo scanner anche con utente normale ma ad ogni riavvio pendo il settaggio... ma anche così non riesco a "far vedere" lo scanner ai pc connessi in rete pur avendo settato nel file net.conf dei client l'ip del server e nel file saned.conf il gruppo 192.168.0.0/16 degli ip attendibili (file che si trovano in /etc/sane.d/)
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: criceto45, Majestic-12 [Bot] e 9 ospiti