[Install] Ubuntu 9.10 si blocca spesso senza motivo apparente
- max230664
- Scoppiettante Seguace

- Messaggi: 503
- Iscrizione: domenica 15 novembre 2009, 10:47
- Desktop: Gnome
- Distribuzione: 22.04 LTS
- Sesso: Maschile
[Install] Ubuntu 9.10 si blocca spesso senza motivo apparente
Qualcuno sa darmi qualche dritta?
Grazie.
- pieddu
- Tenace Tecnocrate

- Messaggi: 13453
- Iscrizione: sabato 11 novembre 2006, 21:46
- Desktop: Mate XFCE
- Distribuzione: Devuan Trisquel
- Sesso: Maschile
- Località: Serravalle di Chienti (Taverne)
Re: [Install] Ubuntu 9.10 si blocca spesso senza motivo apparente
Ad es. i Prescott sono dei buoni candidati al freeze per surriscaldamento....
- c.realkiller
- Rampante Reduce

- Messaggi: 5166
- Iscrizione: mercoledì 7 gennaio 2009, 0:24
- Località: Fossano
- Contatti:
Re: [Install] Ubuntu 9.10 si blocca spesso senza motivo apparente
Codice: Seleziona tutto
cat /var/log/messages > mesages.logSkype: dino.tartaro
facebook: http://www.facebook.com/dino.tartaro
- max230664
- Scoppiettante Seguace

- Messaggi: 503
- Iscrizione: domenica 15 novembre 2009, 10:47
- Desktop: Gnome
- Distribuzione: 22.04 LTS
- Sesso: Maschile
Re: [Install] Ubuntu 9.10 si blocca spesso senza motivo apparente
Il Log lo ha generato ma è di oltre 600K e non riesco ad allegarlo nè come file nè come codice.......c.realkiller ha scritto: magari posta anche qualche loge lo trovi nella home magari anche dell xorgCodice: Seleziona tutto
cat /var/log/messages > mesages.log
- c.realkiller
- Rampante Reduce

- Messaggi: 5166
- Iscrizione: mercoledì 7 gennaio 2009, 0:24
- Località: Fossano
- Contatti:
Re: [Install] Ubuntu 9.10 si blocca spesso senza motivo apparente
fai cosìmax230664 ha scritto: Il Log lo ha generato ma è di oltre 600K e non riesco ad allegarlo nè come file nè come codice.......
Codice: Seleziona tutto
cat /var/log/messages | tail -n 50 > messages.logSkype: dino.tartaro
facebook: http://www.facebook.com/dino.tartaro
- max230664
- Scoppiettante Seguace

- Messaggi: 503
- Iscrizione: domenica 15 novembre 2009, 10:47
- Desktop: Gnome
- Distribuzione: 22.04 LTS
- Sesso: Maschile
Re: [Install] Ubuntu 9.10 si blocca spesso senza motivo apparente
Ecco il file .log.....c.realkiller ha scritto:fai cosìmax230664 ha scritto: Il Log lo ha generato ma è di oltre 600K e non riesco ad allegarlo nè come file nè come codice.......ti restituisce solo le ultime 50 righeCodice: Seleziona tutto
cat /var/log/messages | tail -n 50 > messages.log
Codice: Seleziona tutto
Jul 7 11:35:32 max-desktop kernel: [ 3.970009] EXT4-fs (sda1): write access will be enabled during recovery
Jul 7 11:35:32 max-desktop kernel: [ 3.981943] EXT4-fs (sda1): barriers enabled
Jul 7 11:35:32 max-desktop kernel: [ 8.839214] kjournald2 starting: pid 363, dev sda1:8, commit interval 5 seconds
Jul 7 11:35:32 max-desktop kernel: [ 8.839301] EXT4-fs (sda1): delayed allocation enabled
Jul 7 11:35:32 max-desktop kernel: [ 8.839308] EXT4-fs: file extents enabled
Jul 7 11:35:32 max-desktop kernel: [ 8.839973] EXT4-fs: mballoc enabled
Jul 7 11:35:32 max-desktop kernel: [ 8.840022] EXT4-fs (sda1): orphan cleanup on readonly fs
Jul 7 11:35:32 max-desktop kernel: [ 8.840254] EXT4-fs (sda1): 3 orphan inodes deleted
Jul 7 11:35:32 max-desktop kernel: [ 8.840260] EXT4-fs (sda1): recovery complete
Jul 7 11:35:32 max-desktop kernel: [ 9.065866] EXT4-fs (sda1): mounted filesystem with ordered data mode
Jul 7 11:35:32 max-desktop kernel: [ 25.950890] udev: starting version 147
Jul 7 11:35:32 max-desktop kernel: [ 25.961106] Adding 473876k swap on /dev/sda5. Priority:-1 extents:1 across:473876k
Jul 7 11:35:32 max-desktop kernel: [ 26.083819] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jul 7 11:35:32 max-desktop kernel: [ 26.085969] intel_rng: Firmware space is locked read-only. If you can't or
Jul 7 11:35:32 max-desktop kernel: [ 26.085973] intel_rng: don't want to disable this in firmware setup, and if
Jul 7 11:35:32 max-desktop kernel: [ 26.085975] intel_rng: you are certain that your system has a functional
Jul 7 11:35:32 max-desktop kernel: [ 26.085978] intel_rng: RNG, try using the 'no_fwh_detect' option.
Jul 7 11:35:32 max-desktop kernel: [ 26.152195] lp: driver loaded but no devices found
Jul 7 11:35:32 max-desktop kernel: [ 26.397685] EXT4-fs (sda1): internal journal on sda1:8
Jul 7 11:35:32 max-desktop kernel: [ 26.989380] parport_pc 00:0e: reported by Plug and Play ACPI
Jul 7 11:35:32 max-desktop kernel: [ 26.989450] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Jul 7 11:35:32 max-desktop kernel: [ 27.062065] ip_tables: (C) 2000-2006 Netfilter Core Team
Jul 7 11:35:32 max-desktop kernel: [ 27.077845] lp0: using parport0 (interrupt-driven).
Jul 7 11:35:33 max-desktop kernel: [ 27.097407] ppdev: user-space parallel port driver
Jul 7 11:35:33 max-desktop kernel: [ 27.431640] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Jul 7 11:35:33 max-desktop kernel: [ 27.537752] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jul 7 11:35:33 max-desktop kernel: [ 27.663310] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input4
Jul 7 11:35:33 max-desktop kernel: [ 27.876147] intel8x0_measure_ac97_clock: measured 54966 usecs (2649 samples)
Jul 7 11:35:33 max-desktop kernel: [ 27.876154] intel8x0: clocking to 48000
Jul 7 11:35:33 max-desktop kernel: [ 27.884172] type=1505 audit(1278495333.184:2): operation="profile_load" pid=873 name=/usr/share/gdm/guest-session/Xsession
Jul 7 11:35:33 max-desktop kernel: [ 27.932754] type=1505 audit(1278495333.232:3): operation="profile_load" pid=891 name=/sbin/dhclient3
Jul 7 11:35:33 max-desktop kernel: [ 27.933681] type=1505 audit(1278495333.232:4): operation="profile_load" pid=891 name=/usr/lib/NetworkManager/nm-dhcp-client.action
Jul 7 11:35:33 max-desktop kernel: [ 27.934186] type=1505 audit(1278495333.232:5): operation="profile_load" pid=891 name=/usr/lib/connman/scripts/dhclient-script
Jul 7 11:35:33 max-desktop kernel: [ 28.013685] type=1505 audit(1278495333.312:6): operation="profile_load" pid=892 name=/usr/bin/evince
Jul 7 11:35:33 max-desktop kernel: [ 28.129963] type=1505 audit(1278495333.428:7): operation="profile_load" pid=892 name=/usr/bin/evince-previewer
Jul 7 11:35:33 max-desktop kernel: [ 28.167324] type=1505 audit(1278495333.464:8): operation="profile_load" pid=892 name=/usr/bin/evince-thumbnailer
Jul 7 11:35:33 max-desktop kernel: [ 28.224845] type=1505 audit(1278495333.524:9): operation="profile_load" pid=930 name=/usr/lib/cups/backend/cups-pdf
Jul 7 11:35:33 max-desktop kernel: [ 28.225937] type=1505 audit(1278495333.524:10): operation="profile_load" pid=930 name=/usr/sbin/cupsd
Jul 7 11:35:33 max-desktop kernel: [ 28.239955] type=1505 audit(1278495333.536:11): operation="profile_load" pid=931 name=/usr/sbin/mysqld-akonadi
Jul 7 11:35:34 max-desktop kernel: [ 29.469779] [drm] DAC-5: set mode 1600x1200 10
Jul 7 11:35:35 max-desktop kernel: [ 29.816228] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
Jul 7 11:35:35 max-desktop kernel: [ 29.818371] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jul 7 11:35:36 max-desktop kernel: [ 31.301284] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
Jul 7 11:35:39 max-desktop pulseaudio[1633]: lock-autospawn.c: Cannot access autospawn lock.
Jul 7 11:35:40 max-desktop kernel: [ 35.268178] [drm] DAC-5: set mode 9
Jul 7 11:35:52 max-desktop pulseaudio[1366]: ratelimit.c: 5 events suppressed
Jul 7 11:43:51 max-desktop pulseaudio[1366]: ratelimit.c: 1 events suppressed
Jul 7 12:00:04 max-desktop UBUNTUZILLA: Retrieving the version of the latest release of Firefox from the Mozilla website...
Jul 7 12:00:04 max-desktop UBUNTUZILLA: Latest release version of Firefox : 3.6.6
Jul 7 12:00:04 max-desktop UBUNTUZILLA: Currently installed version of Firefox : 3.6.6- c.realkiller
- Rampante Reduce

- Messaggi: 5166
- Iscrizione: mercoledì 7 gennaio 2009, 0:24
- Località: Fossano
- Contatti:
Re: [Install] Ubuntu 9.10 si blocca spesso senza motivo apparente
Codice: Seleziona tutto
dmesgnel log non vedo niente di strano.
Skype: dino.tartaro
facebook: http://www.facebook.com/dino.tartaro
- max230664
- Scoppiettante Seguace

- Messaggi: 503
- Iscrizione: domenica 15 novembre 2009, 10:47
- Desktop: Gnome
- Distribuzione: 22.04 LTS
- Sesso: Maschile
Re: [Install] Ubuntu 9.10 si blocca spesso senza motivo apparente
c.realkiller ha scritto: scusa posta ancheanche questo sarà bello lungo.Codice: Seleziona tutto
dmesg
nel log non vedo niente di strano.
Codice: Seleziona tutto
[ 0.000000] #6 [00008ed000 - 00008f40d8] BRK ==> [00008ed000 - 00008f40d8]
[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #8 [0000009000 - 000000d000] BOOTMAP ==> [0000009000 - 000000d000]
[ 0.000000] found SMP MP-table at [c00f62d0] f62d0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001fe80
[ 0.000000] HighMem 0x0001fe80 -> 0x0001fe80
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001fcf0
[ 0.000000] 0: 0x0001fd00 -> 0x0001fe80
[ 0.000000] On node 0 totalpages: 130571
[ 0.000000] free_area_init_node: node 0, pgdat c07ae640, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 989 pages used for memmap
[ 0.000000] Normal zone: 125587 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000001fcf0000 - 000000001fcfb000
[ 0.000000] PM: Registered nosave memory: 000000001fcfb000 - 000000001fd00000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 15 pages at c1402000, static data 39036 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129550
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-22-generic-pae root=UUID=d91d2302-709d-4cc2-957a-03be22610497 ro quiet splash
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2613760 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 498416k/522752k available (4660k kernel code, 23544k reserved, 2216k data, 560k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xe0680000 - 0xff9fe000 ( 499 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdfe80000 ( 510 MB)
[ 0.000000] .init : 0xc07b8000 - 0xc0844000 ( 560 kB)
[ 0.000000] .data : 0xc058d200 - 0xc07b7288 (2216 kB)
[ 0.000000] .text : 0xc0100000 - 0xc058d200 (4660 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1794.459 MHz processor.
[ 0.001709] Console: colour VGA+ 80x25
[ 0.001717] console [tty0] enabled
[ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3588.91 BogoMIPS (lpj=7177836)
[ 0.004046] Security Framework initialized
[ 0.004081] AppArmor: AppArmor initialized
[ 0.004095] Mount-cache hash table entries: 512
[ 0.004323] Initializing cgroup subsys ns
[ 0.004332] Initializing cgroup subsys cpuacct
[ 0.004340] Initializing cgroup subsys memory
[ 0.004356] Initializing cgroup subsys devices
[ 0.004361] Initializing cgroup subsys freezer
[ 0.004366] Initializing cgroup subsys net_cls
[ 0.004394] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004400] CPU: L2 cache: 512K
[ 0.004405] CPU: Hyper-Threading is disabled
[ 0.004413] mce: CPU supports 4 MCE banks
[ 0.004430] CPU0: Thermal monitoring enabled (TM1)
[ 0.004445] Performance Counters: no PMU driver, software counters only.
[ 0.004457] Checking 'hlt' instruction... OK.
[ 0.021236] SMP alternatives: switching to UP code
[ 0.044035] Freeing SMP alternatives: 20k freed
[ 0.044081] ACPI: Core revision 20090521
[ 0.056470] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.060001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.060001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.060001] ..... (found apic 0 pin 0) ...
[ 0.103550] ....... works.
[ 0.103554] CPU0: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 07
[ 0.104001] Brought up 1 CPUs
[ 0.104001] Total of 1 processors activated (3588.91 BogoMIPS).
[ 0.104001] CPU0 attaching NULL sched-domain.
[ 0.104001] Booting paravirtualized kernel on bare hardware
[ 0.104001] regulator: core version 0.5
[ 0.104001] Time: 9:35:05 Date: 07/07/10
[ 0.104001] NET: Registered protocol family 16
[ 0.104001] EISA bus registered
[ 0.104001] ACPI: bus type pci registered
[ 0.104001] PCI: PCI BIOS revision 2.10 entry at 0xfd98d, last bus=2
[ 0.104001] PCI: Using configuration type 1 for base access
[ 0.104260] bio: create slab <bio-0> at 0
[ 0.105063] ACPI: EC: Look up EC in DSDT
[ 0.123747] ACPI: Interpreter enabled
[ 0.123758] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.123800] ACPI: Using IOAPIC for interrupt routing
[ 0.164271] ACPI: No dock devices found.
[ 0.166131] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.166209] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.166315] pci 0000:00:02.0: reg 10 32bit mmio: [0x88000000-0x8fffffff]
[ 0.166326] pci 0000:00:02.0: reg 14 32bit mmio: [0x80000000-0x8007ffff]
[ 0.166474] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
[ 0.166548] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
[ 0.166623] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
[ 0.166697] pci 0000:00:1d.7: reg 10 32bit mmio: [0xc0080000-0xc00803ff]
[ 0.166767] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.166775] pci 0000:00:1d.7: PME# disabled
[ 0.166844] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 0.166846] * this clock source is slow. If you are sure your timer does not have
[ 0.166849] * this bug, please use "acpi_pm_good" to disable the workaround
[ 0.166908] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.166914] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[ 0.166950] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.166960] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.166971] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.166981] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.166991] pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f]
[ 0.167002] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.167076] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
[ 0.167140] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
[ 0.167150] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
[ 0.167160] pci 0000:00:1f.5: reg 18 32bit mmio: [0xc0080c00-0xc0080dff]
[ 0.167170] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xc0080800-0xc00808ff]
[ 0.167211] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.167218] pci 0000:00:1f.5: PME# disabled
[ 0.167290] pci 0000:02:08.0: reg 10 32bit mmio: [0xc0100000-0xc0100fff]
[ 0.167301] pci 0000:02:08.0: reg 14 io port: [0x2000-0x203f]
[ 0.167353] pci 0000:02:08.0: supports D1 D2
[ 0.167357] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.167363] pci 0000:02:08.0: PME# disabled
[ 0.167407] pci 0000:00:1e.0: transparent bridge
[ 0.167414] pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff]
[ 0.167421] pci 0000:00:1e.0: bridge 32bit mmio: [0xc0100000-0xc01fffff]
[ 0.167439] pci_bus 0000:00: on NUMA node 0
[ 0.167447] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.167651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLOT._PRT]
[ 0.251508] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.251688] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.251867] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.252058] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.252248] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.252436] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.252626] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.252817] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.253189] SCSI subsystem initialized
[ 0.253317] libata version 3.00 loaded.
[ 0.253460] usbcore: registered new interface driver usbfs
[ 0.253483] usbcore: registered new interface driver hub
[ 0.253528] usbcore: registered new device driver usb
[ 0.253762] ACPI: WMI: Mapper loaded
[ 0.253766] PCI: Using ACPI for IRQ routing
[ 0.254047] Bluetooth: Core ver 2.15
[ 0.254103] NET: Registered protocol family 31
[ 0.254107] Bluetooth: HCI device and connection manager initialized
[ 0.254112] Bluetooth: HCI socket layer initialized
[ 0.254115] NetLabel: Initializing
[ 0.254119] NetLabel: domain hash size = 128
[ 0.254121] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.254145] NetLabel: unlabeled traffic allowed by default
[ 0.257307] pnp: PnP ACPI init
[ 0.257355] ACPI: bus type pnp registered
[ 0.312054] pnp: PnP ACPI: found 15 devices
[ 0.312060] ACPI: ACPI bus type pnp unregistered
[ 0.312066] PnPBIOS: Disabled by ACPI PNP
[ 0.312090] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.312097] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 0.312104] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.312110] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.312115] system 00:01: ioport range 0x1100-0x111f has been reserved
[ 0.312120] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 0.312128] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.312135] system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved
[ 0.312140] system 00:01: iomem range 0xeffffc00-0xefffffff has been reserved
[ 0.346990] AppArmor: AppArmor Filesystem Enabled
[ 0.347036] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.347043] pci 0000:00:1e.0: IO window: 0x2000-0x2fff
[ 0.347053] pci 0000:00:1e.0: MEM window: 0xc0100000-0xc01fffff
[ 0.347060] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.347080] pci 0000:00:1e.0: setting latency timer to 64
[ 0.347089] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.347094] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.347099] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.347104] pci_bus 0000:02: resource 1 mem: [0xc0100000-0xc01fffff]
[ 0.347108] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.347113] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.347184] NET: Registered protocol family 2
[ 0.347352] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.347848] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.347999] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.348118] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.348122] TCP reno registered
[ 0.348260] NET: Registered protocol family 1
[ 0.348381] Trying to unpack rootfs image as initramfs...
[ 0.748591] Freeing initrd memory: 8242k freed
[ 0.766071] Simple Boot Flag at 0x6c set to 0x1
[ 0.766215] cpufreq-nforce2: No nForce2 chipset.
[ 0.766293] Scanning for low memory corruption every 60 seconds
[ 0.766506] audit: initializing netlink socket (disabled)
[ 0.766545] type=2000 audit(1278495305.763:1): initialized
[ 0.778555] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.781050] VFS: Disk quotas dquot_6.5.2
[ 0.781160] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.782156] fuse init (API version 7.12)
[ 0.782306] msgmni has been set to 990
[ 0.782690] alg: No test for stdrng (krng)
[ 0.782715] io scheduler noop registered
[ 0.782719] io scheduler anticipatory registered
[ 0.782722] io scheduler deadline registered
[ 0.782812] io scheduler cfq registered (default)
[ 0.782840] pci 0000:00:02.0: Boot video device
[ 0.783051] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.783183] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.783229] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.783437] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.783445] ACPI: Power Button [PWRF]
[ 0.783552] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input1
[ 0.783558] ACPI: Power Button [PWRB]
[ 0.783849] processor LNXCPU:00: registered as cooling_device0
[ 0.783857] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.810384] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.810401] ACPI: Thermal Zone [THM0] (49 C)
[ 0.810487] isapnp: Scanning for PnP cards...
[ 0.847930] Switched to high resolution mode on CPU 0
[ 1.164728] isapnp: No Plug & Play device found
[ 1.166721] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.166885] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.167004] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.167565] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.167740] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.169491] brd: module loaded
[ 1.170249] loop: module loaded
[ 1.170409] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.170601] ata_piix 0000:00:1f.1: version 2.13
[ 1.170623] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.170639] alloc irq_desc for 18 on node -1
[ 1.170642] alloc kstat_irqs on node -1
[ 1.170655] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.170747] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.170920] scsi0 : ata_piix
[ 1.171107] scsi1 : ata_piix
[ 1.172794] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
[ 1.172801] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
[ 1.174354] Fixed MDIO Bus: probed
[ 1.174419] PPP generic driver version 2.4.2
[ 1.174611] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.174653] alloc irq_desc for 23 on node -1
[ 1.174657] alloc kstat_irqs on node -1
[ 1.174670] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.174702] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.174709] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.174762] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.178701] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 1.178728] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xc0080000
[ 1.192021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.192156] usb usb1: configuration #1 chosen from 1 choice
[ 1.192212] hub 1-0:1.0: USB hub found
[ 1.192232] hub 1-0:1.0: 6 ports detected
[ 1.192341] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.192375] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.192452] alloc irq_desc for 16 on node -1
[ 1.192456] alloc kstat_irqs on node -1
[ 1.192466] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.192482] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.192487] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.192559] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.192599] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
[ 1.192749] usb usb2: configuration #1 chosen from 1 choice
[ 1.192802] hub 2-0:1.0: USB hub found
[ 1.192816] hub 2-0:1.0: 2 ports detected
[ 1.192889] alloc irq_desc for 19 on node -1
[ 1.192893] alloc kstat_irqs on node -1
[ 1.192901] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.192911] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.192917] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.192969] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.193007] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[ 1.193141] usb usb3: configuration #1 chosen from 1 choice
[ 1.193187] hub 3-0:1.0: USB hub found
[ 1.193200] hub 3-0:1.0: 2 ports detected
[ 1.193266] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.193276] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.193281] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.193331] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.193369] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 1.193506] usb usb4: configuration #1 chosen from 1 choice
[ 1.193552] hub 4-0:1.0: USB hub found
[ 1.193567] hub 4-0:1.0: 2 ports detected
[ 1.193732] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PSM] at 0x60,0x64 irq 1,12
[ 1.195290] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.195303] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.195406] mice: PS/2 mouse device common for all mice
[ 1.195552] rtc_cmos 00:04: RTC can wake from S4
[ 1.195616] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.195666] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 1.195873] device-mapper: uevent: version 1.0.3
[ 1.196080] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.196225] device-mapper: multipath: version 1.1.0 loaded
[ 1.196231] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.196452] EISA: Probing bus 0 at eisa.0
[ 1.196463] Cannot allocate resource for EISA slot 1
[ 1.196470] Cannot allocate resource for EISA slot 2
[ 1.196503] EISA: Detected 0 cards.
[ 1.196582] cpuidle: using governor ladder
[ 1.196587] cpuidle: using governor menu
[ 1.197513] TCP cubic registered
[ 1.197745] NET: Registered protocol family 10
[ 1.198497] lo: Disabled Privacy Extensions
[ 1.199025] NET: Registered protocol family 17
[ 1.199062] Bluetooth: L2CAP ver 2.13
[ 1.199065] Bluetooth: L2CAP socket layer initialized
[ 1.199070] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.199073] Bluetooth: SCO socket layer initialized
[ 1.199136] Bluetooth: RFCOMM TTY layer initialized
[ 1.199142] Bluetooth: RFCOMM socket layer initialized
[ 1.199145] Bluetooth: RFCOMM ver 1.11
[ 1.199206] Using IPI No-Shortcut mode
[ 1.199345] PM: Resume from disk failed.
[ 1.199369] registered taskstats version 1
[ 1.199542] Magic number: 2:513:575
[ 1.199660] rtc_cmos 00:04: setting system clock to 2010-07-07 09:35:06 UTC (1278495306)
[ 1.199666] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.199669] EDD information not available.
[ 1.216138] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.336731] ata1.00: ATA-6: Maxtor 31024H2, BAC51KJ0, max UDMA/100
[ 1.336737] ata1.00: 20010816 sectors, multi 16: LBA
[ 1.344576] ata2.00: ATAPI: HL-DT-ST CD-ROM GCR-8480B, 1.02, max UDMA/33
[ 1.352612] ata1.00: configured for UDMA/100
[ 1.352812] scsi 0:0:0:0: Direct-Access ATA Maxtor 31024H2 BAC5 PQ: 0 ANSI: 5
[ 1.353028] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.353108] sd 0:0:0:0: [sda] 20010816 512-byte logical blocks: (10.2 GB/9.54 GiB)
[ 1.353196] sd 0:0:0:0: [sda] Write Protect is off
[ 1.353202] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.353247] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.353496] sda:
[ 1.360296] ata2.00: configured for UDMA/33
[ 1.361420] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8480B 1.02 PQ: 0 ANSI: 5
[ 1.365709] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 1.365716] Uniform CD-ROM driver Revision: 3.20
[ 1.365876] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.365970] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.380252] sda1 sda2 < sda5 >
[ 1.412373] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.412406] Freeing unused kernel memory: 560k freed
[ 1.413447] Write protecting the kernel text: 4664k
[ 1.413543] Write protecting the kernel read-only data: 1860k
[ 1.616328] ramzswap: disk size set to 126888 kB
[ 1.713592] Linux agpgart interface v0.103
[ 1.719564] agpgart-intel 0000:00:00.0: Intel 830M Chipset
[ 1.719796] agpgart-intel 0000:00:00.0: detected 892K stolen memory
[ 1.829389] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.829396] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.829490] alloc irq_desc for 20 on node -1
[ 1.829496] alloc kstat_irqs on node -1
[ 1.829510] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.853636] e100 0000:02:08.0: PME# disabled
[ 1.857664] Floppy drive(s): fd0 is 1.44M
[ 1.862119] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0x88000000
[ 1.877023] FDC 0 is a post-1991 82077
[ 1.963619] Adding 126884k swap on /dev/ramzswap0. Priority:100 extents:1 across:126884k SSD
[ 2.076652] e100: eth0: e100_probe: addr 0xc0100000, irq 20, MAC addr 00:09:6b:11:8d:f2
[ 2.077441] [drm] Initialized drm 1.1.0 20060810
[ 2.103453] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.103466] i915 0000:00:02.0: setting latency timer to 64
[ 2.204340] [drm] DAC-5: set mode 640x480 0
[ 2.629202] i2c-adapter i2c-0: unable to read EDID block.
[ 2.629210] i915 0000:00:02.0: VGA-1: no EDID data
[ 2.629215] [drm:drm_helper_initial_config] *ERROR* connectors have no modes, using standard modes
[ 2.634733] [drm] fb0: inteldrmfb frame buffer device
[ 2.634749] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.750792] [drm] DAC-5: set mode 800x600 8
[ 2.754564] Console: switching to colour frame buffer device 100x37
[ 3.330376] xor: automatically using best checksumming function: pIII_sse
[ 3.348010] pIII_sse : 2291.000 MB/sec
[ 3.348014] xor: using function: pIII_sse (2291.000 MB/sec)
[ 3.354307] device-mapper: dm-raid45: initialized v0.2594b
[ 3.936559] PM: Starting manual resume from disk
[ 3.936568] PM: Resume from partition 8:5
[ 3.936571] PM: Checking hibernation image.
[ 3.936864] PM: Resume from disk failed.
[ 3.969999] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 3.970009] EXT4-fs (sda1): write access will be enabled during recovery
[ 3.981943] EXT4-fs (sda1): barriers enabled
[ 8.839214] kjournald2 starting: pid 363, dev sda1:8, commit interval 5 seconds
[ 8.839301] EXT4-fs (sda1): delayed allocation enabled
[ 8.839308] EXT4-fs: file extents enabled
[ 8.839973] EXT4-fs: mballoc enabled
[ 8.840022] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 8.840040] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 422233
[ 8.840207] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 422110
[ 8.840239] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 522265
[ 8.840254] EXT4-fs (sda1): 3 orphan inodes deleted
[ 8.840260] EXT4-fs (sda1): recovery complete
[ 9.065866] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 25.950890] udev: starting version 147
[ 25.961106] Adding 473876k swap on /dev/sda5. Priority:-1 extents:1 across:473876k
[ 26.083819] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 26.085969] intel_rng: Firmware space is locked read-only. If you can't or
[ 26.085973] intel_rng: don't want to disable this in firmware setup, and if
[ 26.085975] intel_rng: you are certain that your system has a functional
[ 26.085978] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 26.152195] lp: driver loaded but no devices found
[ 26.397685] EXT4-fs (sda1): internal journal on sda1:8
[ 26.989380] parport_pc 00:0e: reported by Plug and Play ACPI
[ 26.989450] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 27.062065] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 27.077845] lp0: using parport0 (interrupt-driven).
[ 27.097407] ppdev: user-space parallel port driver
[ 27.279596] psmouse serio1: ID: 00 00 28
[ 27.431604] alloc irq_desc for 17 on node -1
[ 27.431610] alloc kstat_irqs on node -1
[ 27.431640] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 27.431710] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 27.537752] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.663310] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input4
[ 27.876147] intel8x0_measure_ac97_clock: measured 54966 usecs (2649 samples)
[ 27.876154] intel8x0: clocking to 48000
[ 27.884172] type=1505 audit(1278495333.184:2): operation="profile_load" pid=873 name=/usr/share/gdm/guest-session/Xsession
[ 27.932754] type=1505 audit(1278495333.232:3): operation="profile_load" pid=891 name=/sbin/dhclient3
[ 27.933681] type=1505 audit(1278495333.232:4): operation="profile_load" pid=891 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 27.934186] type=1505 audit(1278495333.232:5): operation="profile_load" pid=891 name=/usr/lib/connman/scripts/dhclient-script
[ 28.013685] type=1505 audit(1278495333.312:6): operation="profile_load" pid=892 name=/usr/bin/evince
[ 28.129963] type=1505 audit(1278495333.428:7): operation="profile_load" pid=892 name=/usr/bin/evince-previewer
[ 28.167324] type=1505 audit(1278495333.464:8): operation="profile_load" pid=892 name=/usr/bin/evince-thumbnailer
[ 28.224845] type=1505 audit(1278495333.524:9): operation="profile_load" pid=930 name=/usr/lib/cups/backend/cups-pdf
[ 28.225937] type=1505 audit(1278495333.524:10): operation="profile_load" pid=930 name=/usr/sbin/cupsd
[ 28.239955] type=1505 audit(1278495333.536:11): operation="profile_load" pid=931 name=/usr/sbin/mysqld-akonadi
[ 29.469779] [drm] DAC-5: set mode 1600x1200 10
[ 29.816228] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[ 29.818371] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 31.300991] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 31.301004] vboxdrv: Successfully done.
[ 31.301008] vboxdrv: Found 1 processor cores.
[ 31.301284] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 31.301288] vboxdrv: Successfully loaded version 3.0.10 (interface 0x000e0001).
[ 35.268178] [drm] DAC-5: set mode 9
[ 40.632037] eth0: no IPv6 routers present
max@max-desktop:~$
- c.realkiller
- Rampante Reduce

- Messaggi: 5166
- Iscrizione: mercoledì 7 gennaio 2009, 0:24
- Località: Fossano
- Contatti:
Re: [Install] Ubuntu 9.10 si blocca spesso senza motivo apparente
Skype: dino.tartaro
facebook: http://www.facebook.com/dino.tartaro
- pieddu
- Tenace Tecnocrate

- Messaggi: 13453
- Iscrizione: sabato 11 novembre 2006, 21:46
- Desktop: Mate XFCE
- Distribuzione: Devuan Trisquel
- Sesso: Maschile
- Località: Serravalle di Chienti (Taverne)
Re: [Install] Ubuntu 9.10 si blocca spesso senza motivo apparente
Io credo la cpu si scaldi visto che è piccolina.
Intanto
Codice: Seleziona tutto
topPoi ogni tanto darei un
Codice: Seleziona tutto
acpi -VPoi proverei con
Codice: Seleziona tutto
cat /proc/cpu/cpuinfoCodice: Seleziona tutto
[ 0.166844] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 0.166846] * this clock source is slow. If you are sure your timer does not have
[ 0.166849] * this bug, please use "acpi_pm_good" to disable the workaround- max230664
- Scoppiettante Seguace

- Messaggi: 503
- Iscrizione: domenica 15 novembre 2009, 10:47
- Desktop: Gnome
- Distribuzione: 22.04 LTS
- Sesso: Maschile
Re: [Install] Ubuntu 9.10 si blocca spesso senza motivo apparente
Codice: Seleziona tutto
cat /proc/cpu/cpuinfoCodice: Seleziona tutto
max@max-desktop:~$ cat /proc/cpu/cpuinfo
cat: /proc/cpu/cpuinfo: Nessun file o directory
max@max-desktop:~$
Codice: Seleziona tutto
[ 0.166844] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 0.166846] * this clock source is slow. If you are sure your timer does not have
[ 0.166849] * this bug, please use "acpi_pm_good" to disable the workaround[/quote]
Qui non capisco nulla... cosa è l'HT? come faccio per attivarlo? cosa significa passare acpi_pm_good come parametro d'avvio del kernel?
Grazie.
- c.realkiller
- Rampante Reduce

- Messaggi: 5166
- Iscrizione: mercoledì 7 gennaio 2009, 0:24
- Località: Fossano
- Contatti:
Re: [Install] Ubuntu 9.10 si blocca spesso senza motivo apparente
Codice: Seleziona tutto
sudo apt-get install acpiSkype: dino.tartaro
facebook: http://www.facebook.com/dino.tartaro
- pieddu
- Tenace Tecnocrate

- Messaggi: 13453
- Iscrizione: sabato 11 novembre 2006, 21:46
- Desktop: Mate XFCE
- Distribuzione: Devuan Trisquel
- Sesso: Maschile
- Località: Serravalle di Chienti (Taverne)
Re: [Install] Ubuntu 9.10 si blocca spesso senza motivo apparente
Codice: Seleziona tutto
cat /proc/cpuinfoacpi è installato e funzionante, almeno a vedere dai log....
- max230664
- Scoppiettante Seguace

- Messaggi: 503
- Iscrizione: domenica 15 novembre 2009, 10:47
- Desktop: Gnome
- Distribuzione: 22.04 LTS
- Sesso: Maschile
Re: [Install] Ubuntu 9.10 si blocca spesso senza motivo apparente
Confermo,acpi risulta installato e funzionante:pieddu ha scritto:prova questoCodice: Seleziona tutto
cat /proc/cpuinfo
acpi è installato e funzionante, almeno a vedere dai log....
Codice: Seleziona tutto
max@max-desktop:~$ sudo apt-get install acpi
Lettura elenco dei pacchetti... Fatto
Generazione albero delle dipendenze
Lettura informazioni sullo stato... Fatto
acpi è già alla versione più recente.
0 aggiornati, 0 installati, 0 da rimuovere e 6 non aggiornati.
max@max-desktop:~$
Codice: Seleziona tutto
max@max-desktop:~$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 1.80GHz
stepping : 7
cpu MHz : 1794.459
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up pebs bts cid
bogomips : 3588.91
clflush size : 64
power management:
max@max-desktop:~$
- pieddu
- Tenace Tecnocrate

- Messaggi: 13453
- Iscrizione: sabato 11 novembre 2006, 21:46
- Desktop: Mate XFCE
- Distribuzione: Devuan Trisquel
- Sesso: Maschile
- Località: Serravalle di Chienti (Taverne)
Re: [Install] Ubuntu 9.10 si blocca spesso senza motivo apparente
Entra nel BIOS e attivalo. Sei capace?
- max230664
- Scoppiettante Seguace

- Messaggi: 503
- Iscrizione: domenica 15 novembre 2009, 10:47
- Desktop: Gnome
- Distribuzione: 22.04 LTS
- Sesso: Maschile
Re: [Install] Ubuntu 9.10 si blocca spesso senza motivo apparente
Nel Bios sono in grado di entrarci ma lhyper-treading non so nemmeno cosa sia!!!!!!pieddu ha scritto: Hai lhyper-treading e non lo stai usando....
Entra nel BIOS e attivalo. Sei capace?
Mi spieghi velocemente cosa devo fare?
- pieddu
- Tenace Tecnocrate

- Messaggi: 13453
- Iscrizione: sabato 11 novembre 2006, 21:46
- Desktop: Mate XFCE
- Distribuzione: Devuan Trisquel
- Sesso: Maschile
- Località: Serravalle di Chienti (Taverne)
Re: [Install] Ubuntu 9.10 si blocca spesso senza motivo apparente
- max230664
- Scoppiettante Seguace

- Messaggi: 503
- Iscrizione: domenica 15 novembre 2009, 10:47
- Desktop: Gnome
- Distribuzione: 22.04 LTS
- Sesso: Maschile
Re: [Install] Ubuntu 9.10 si blocca spesso senza motivo apparente
Scusa se insisto ma cosa devo attivare nel Bios?pieddu ha scritto: Devi andare nella gestione della cpu e attivarlo, sembra disattivato proprio dal BIOS.
- pieddu
- Tenace Tecnocrate

- Messaggi: 13453
- Iscrizione: sabato 11 novembre 2006, 21:46
- Desktop: Mate XFCE
- Distribuzione: Devuan Trisquel
- Sesso: Maschile
- Località: Serravalle di Chienti (Taverne)
Re: [Install] Ubuntu 9.10 si blocca spesso senza motivo apparente
Non conosco il BIOS del tuo pc, quindi non so come si fa, ma dai log del kernel sembra disattivato dal BIOS. Trova tu il modo. Di solito c'è una sezione del BIOS dedicata alla cpu ed alle sue caratteristiche.
- pieddu
- Tenace Tecnocrate

- Messaggi: 13453
- Iscrizione: sabato 11 novembre 2006, 21:46
- Desktop: Mate XFCE
- Distribuzione: Devuan Trisquel
- Sesso: Maschile
- Località: Serravalle di Chienti (Taverne)
Re: [Install] Ubuntu 9.10 si blocca spesso senza motivo apparente
Codice: Seleziona tutto
[ 0.004405] CPU: Hyper-Threading is disabledChi c’è in linea
Visualizzano questa sezione: Google [Bot] e 3 ospiti