Proviamo a controllare
Codice: Seleziona tutto
topCodice: Seleziona tutto
uname -r
Codice: Seleziona tutto
topCodice: Seleziona tutto
uname -rCodice: Seleziona tutto
stefano@stefano-laptop:~$ top
top - 09:16:57 up 57 min, 3 users, load average: 1.41, 2.18, 3.47
Tasks: 193 total, 1 running, 192 sleeping, 0 stopped, 0 zombie
Cpu(s): 21.5%us, 18.8%sy, 3.1%ni, 56.2%id, 0.2%wa, 0.2%hi, 0.0%si, 0.0%st
Mem: 2060536k total, 1994584k used, 65952k free, 3928k buffers
Swap: 1052248k total, 129236k used, 923012k free, 68424k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1840 stefano 20 0 1327m 1.1g 1.0g S 27 54.9 20:51.15 VirtualBox
1041 root 20 0 118m 26m 5924 S 24 1.3 8:53.43 Xorg
1769 stefano 20 0 48292 6520 3260 S 11 0.3 5:11.92 gnome-system-mo
1617 stefano 20 0 258m 62m 12m S 10 3.1 3:48.66 firefox-bin
1685 stefano 20 0 193m 21m 3744 S 5 1.1 2:33.45 plugin-containe
1454 stefano 20 0 145m 5768 1848 S 4 0.3 1:12.29 compiz
1462 stefano 9 -11 220m 3060 2204 S 2 0.1 1:12.62 pulseaudio
3266 stefano 20 0 50472 7244 4624 S 2 0.4 0:01.35 gnome-terminal
3219 stefano 20 0 746m 93m 3524 S 1 4.7 0:30.79 java
3409 stefano 20 0 481m 88m 3488 S 1 4.4 0:13.27 java
3648 stefano 20 0 2544 1232 904 R 1 0.1 0:00.10 top
48 root 20 0 0 0 0 S 0 0.0 0:02.69 scsi_eh_1
57 root 20 0 0 0 0 S 0 0.0 0:00.53 kondemand/1
1484 stefano 20 0 3816 308 224 S 0 0.0 0:00.90 syndaemon
3557 stefano 20 0 116m 23m 1856 S 0 1.1 0:02.48 chrome
1 root 20 0 2796 624 232 S 0 0.0 0:00.55 init
2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd Codice: Seleziona tutto
sudo sysctl vm.swappiness=XXCodice: Seleziona tutto
total used free shared buffers cached
Mem: 2012 1960 51 0 1 55
-/+ buffers/cache: 1903 108
Swap: 1027 89 938

Codice: Seleziona tutto
dmesgCodice: Seleziona tutto
stefano@stefano-laptop:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-24-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #38-Ubuntu SMP Mon Jul 5 09:22:14 UTC 2010 (Ubuntu 2.6.32-24.38-generic 2.6.32.15+drm33.5)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fed3400 (usable)
[ 0.000000] BIOS-e820: 000000007fed3400 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7fed3 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fed3400 (usable)
[ 0.000000] modified: 000000007fed3400 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0007000 (reserved)
[ 0.000000] modified: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 37856000 - 37fefb98
[ 0.000000] Allocated new RAMDISK: 008e0000 - 01079b98
[ 0.000000] Move RAMDISK from 0000000037856000 - 0000000037fefb97 to 008e0000 - 01079b97
[ 0.000000] ACPI: RSDP 000fc370 00014 (v00 DELL )
[ 0.000000] ACPI: RSDT 7fed3a96 00038 (v01 DELL M07 27D50C11 ASL 00000061)
[ 0.000000] ACPI: FACP 7fed4800 00074 (v01 DELL M07 27D50C11 ASL 00000061)
[ 0.000000] ACPI: DSDT 7fed5400 03687 (v01 INT430 SYSFexxx 00001001 INTL 20050624)
[ 0.000000] ACPI: FACS 7fee3c00 00040
[ 0.000000] ACPI: APIC 7fed5000 00068 (v01 DELL M07 27D50C11 ASL 00000047)
[ 0.000000] ACPI: MCFG 7fed4fc0 0003E (v16 DELL M07 27D50C11 ASL 00000061)
[ 0.000000] ACPI: BOOT 7fed4bc0 00028 (v01 DELL M07 27D50C11 ASL 00000061)
[ 0.000000] ACPI: SSDT 7fed3ace 004DC (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1158MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008dbeb8] TEXT DATA BSS ==> [0000100000 - 00008dbeb8]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [00008dc000 - 00008df188] BRK ==> [00008dc000 - 00008df188]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008e0000 - 0001079b98] NEW RAMDISK ==> [00008e0000 - 0001079b98]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fed3
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fed3
[ 0.000000] On node 0 totalpages: 523886
[ 0.000000] free_area_init_node: node 0, pgdat c0798780, node_mem_map c107b000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2318 pages used for memmap
[ 0.000000] HighMem zone: 294343 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36056 r0 d21288 u2097152
[ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519792
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=1dc7df3d-5c1c-4b85-9693-257b69f8a839 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10479740 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fed3)
[ 0.000000] Memory: 2051036k/2095948k available (4679k kernel code, 43448k reserved, 2116k data, 660k init, 1186644k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0848000 ( 660 kB)
[ 0.000000] .data : 0xc0591d23 - 0xc07a2e88 (2116 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0591d23 (4679 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1828.925 MHz processor.
[ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.85 BogoMIPS (lpj=7315700)
[ 0.008026] Security Framework initialized
[ 0.008050] AppArmor: AppArmor initialized
[ 0.008058] Mount-cache hash table entries: 512
[ 0.008202] Initializing cgroup subsys ns
[ 0.008207] Initializing cgroup subsys cpuacct
[ 0.008211] Initializing cgroup subsys memory
[ 0.008219] Initializing cgroup subsys devices
[ 0.008222] Initializing cgroup subsys freezer
[ 0.008225] Initializing cgroup subsys net_cls
[ 0.008248] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008251] CPU: L2 cache: 2048K
[ 0.008254] CPU: Physical Processor ID: 0
[ 0.008256] CPU: Processor Core ID: 0
[ 0.008260] mce: CPU supports 6 MCE banks
[ 0.008272] CPU0: Thermal monitoring enabled (TM2)
[ 0.008276] using mwait in idle threads.
[ 0.008284] Performance Events: no PMU driver, software events only.
[ 0.008291] Checking 'hlt' instruction... OK.
[ 0.027453] ACPI: Core revision 20090903
[ 0.034727] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.034733] ftrace: allocating 21780 entries in 43 pages
[ 0.036065] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036423] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.079217] CPU0: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
[ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.012000] Initializing CPU#1
[ 0.012000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.012000] CPU: L2 cache: 2048K
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 1
[ 0.012000] CPU1: Thermal monitoring enabled (TM2)
[ 0.164054] CPU1: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
[ 0.164070] checking TSC synchronization [CPU#0 -> CPU#1]:
[ 0.168001] Measured 2935336338 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.168001] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.168022] Brought up 2 CPUs
[ 0.168026] Total of 2 processors activated (7315.62 BogoMIPS).
[ 0.168522] CPU0 attaching sched-domain:
[ 0.168527] domain 0: span 0-1 level MC
[ 0.168530] groups: 0 1
[ 0.168537] CPU1 attaching sched-domain:
[ 0.168539] domain 0: span 0-1 level MC
[ 0.168542] groups: 1 0
[ 0.168659] devtmpfs: initialized
[ 0.168659] regulator: core version 0.5
[ 0.168659] Time: 6:19:27 Date: 07/14/10
[ 0.168659] NET: Registered protocol family 16
[ 0.168659] Trying to unpack rootfs image as initramfs...
[ 0.168659] EISA bus registered
[ 0.168659] ACPI: bus type pci registered
[ 0.168659] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[ 0.168659] PCI: MCFG area at e0000000 reserved in E820
[ 0.168659] PCI: Using MMCONFIG for extended config space
[ 0.168659] PCI: Using configuration type 1 for base access
[ 0.172122] bio: create slab <bio-0> at 0
[ 0.172915] ACPI: EC: Look up EC in DSDT
[ 0.190045] ACPI: Interpreter enabled
[ 0.190061] ACPI: (supports S0 S3 S4 S5)
[ 0.190087] ACPI: Using IOAPIC for interrupt routing
[ 0.223257] ACPI: No dock devices found.
[ 0.236790] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.236943] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.236948] pci 0000:00:01.0: PME# disabled
[ 0.237045] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdfffc000-0xdfffffff]
[ 0.237112] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.237117] pci 0000:00:1b.0: PME# disabled
[ 0.237219] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.237225] pci 0000:00:1c.0: PME# disabled
[ 0.237330] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.237335] pci 0000:00:1c.1: PME# disabled
[ 0.237441] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.237447] pci 0000:00:1c.3: PME# disabled
[ 0.237533] pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f]
[ 0.237626] pci 0000:00:1d.1: reg 20 io port: [0xbf60-0xbf7f]
[ 0.237719] pci 0000:00:1d.2: reg 20 io port: [0xbf40-0xbf5f]
[ 0.237811] pci 0000:00:1d.3: reg 20 io port: [0xbf20-0xbf3f]
[ 0.237893] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80000-0xffa803ff]
[ 0.237962] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.237969] pci 0000:00:1d.7: PME# disabled
[ 0.238158] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.238166] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.238171] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
[ 0.238176] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[ 0.238184] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[ 0.238257] pci 0000:00:1f.2: reg 10 io port: [0x1f0-0x1f7]
[ 0.238266] pci 0000:00:1f.2: reg 14 io port: [0x3f4-0x3f7]
[ 0.238275] pci 0000:00:1f.2: reg 18 io port: [0x170-0x177]
[ 0.238284] pci 0000:00:1f.2: reg 1c io port: [0x374-0x377]
[ 0.238293] pci 0000:00:1f.2: reg 20 io port: [0xbfa0-0xbfaf]
[ 0.238333] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.238338] pci 0000:00:1f.2: PME# disabled
[ 0.238402] pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
[ 0.238474] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.238484] pci 0000:01:00.0: reg 14 io port: [0xee00-0xeeff]
[ 0.238494] pci 0000:01:00.0: reg 18 32bit mmio: [0xdfdf0000-0xdfdfffff]
[ 0.238515] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xdfe00000-0xdfe1ffff]
[ 0.238541] pci 0000:01:00.0: supports D1 D2
[ 0.238605] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[ 0.238609] pci 0000:00:01.0: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
[ 0.238615] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.238868] pci 0000:0c:00.0: reg 10 32bit mmio: [0xdfcff000-0xdfcfffff]
[ 0.239107] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[ 0.239120] pci 0000:0c:00.0: PME# disabled
[ 0.239241] pci 0000:00:1c.1: bridge 32bit mmio: [0xdfc00000-0xdfcfffff]
[ 0.239313] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
[ 0.239319] pci 0000:00:1c.3: bridge 32bit mmio: [0xdfa00000-0xdfbfffff]
[ 0.239328] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xd0000000-0xd01fffff]
[ 0.239373] pci 0000:03:00.0: reg 10 32bit mmio: [0xdf9fe000-0xdf9fffff]
[ 0.239434] pci 0000:03:00.0: supports D1 D2
[ 0.239437] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.239443] pci 0000:03:00.0: PME# disabled
[ 0.239487] pci 0000:03:01.0: reg 10 32bit mmio: [0xdf9fd800-0xdf9fdfff]
[ 0.239547] pci 0000:03:01.0: supports D1 D2
[ 0.239550] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.239556] pci 0000:03:01.0: PME# disabled
[ 0.239600] pci 0000:03:01.1: reg 10 32bit mmio: [0xdf9fd400-0xdf9fd4ff]
[ 0.239663] pci 0000:03:01.1: supports D1 D2
[ 0.239665] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.239672] pci 0000:03:01.1: PME# disabled
[ 0.239715] pci 0000:03:01.2: reg 10 32bit mmio: [0xdf9fd500-0xdf9fd5ff]
[ 0.239775] pci 0000:03:01.2: supports D1 D2
[ 0.239778] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.239784] pci 0000:03:01.2: PME# disabled
[ 0.239828] pci 0000:03:01.3: reg 10 32bit mmio: [0xdf9fd600-0xdf9fd6ff]
[ 0.239888] pci 0000:03:01.3: supports D1 D2
[ 0.239891] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.239897] pci 0000:03:01.3: PME# disabled
[ 0.239941] pci 0000:03:01.4: reg 10 32bit mmio: [0xdf9fd700-0xdf9fd7ff]
[ 0.240015] pci 0000:03:01.4: supports D1 D2
[ 0.240018] pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.240024] pci 0000:03:01.4: PME# disabled
[ 0.240091] pci 0000:00:1e.0: transparent bridge
[ 0.240100] pci 0000:00:1e.0: bridge 32bit mmio: [0xdf900000-0xdf9fffff]
[ 0.240137] pci_bus 0000:00: on NUMA node 0
[ 0.240146] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.240481] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.240555] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.240649] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.240732] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP1._PRT]
[ 0.240817] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.251968] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4
[ 0.252120] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
[ 0.252249] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[ 0.252378] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
[ 0.252510] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.252644] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.252778] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.252913] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.253066] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.253074] vgaarb: loaded
[ 0.253225] SCSI subsystem initialized
[ 0.253340] libata version 3.00 loaded.
[ 0.253433] usbcore: registered new interface driver usbfs
[ 0.253448] usbcore: registered new interface driver hub
[ 0.253482] usbcore: registered new device driver usb
[ 0.253635] ACPI: WMI: Mapper loaded
[ 0.253638] PCI: Using ACPI for IRQ routing
[ 0.253906] NetLabel: Initializing
[ 0.253908] NetLabel: domain hash size = 128
[ 0.253910] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.253926] NetLabel: unlabeled traffic allowed by default
[ 0.254088] hpet clockevent registered
[ 0.254092] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.254099] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.254105] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.260085] Switching to clocksource hpet
[ 0.262405] AppArmor: AppArmor Filesystem Enabled
[ 0.262425] pnp: PnP ACPI init
[ 0.262444] ACPI: bus type pnp registered
[ 0.294762] pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.294768] pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.294859] pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.294864] pnp 00:03: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.294868] pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.294872] pnp 00:03: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.295880] pnp: PnP ACPI: found 11 devices
[ 0.295883] ACPI: ACPI bus type pnp unregistered
[ 0.295888] PnPBIOS: Disabled by ACPI PNP
[ 0.295903] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[ 0.295907] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[ 0.295911] system 00:00: iomem range 0xc0000-0xcffff could not be reserved
[ 0.295915] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.295919] system 00:00: iomem range 0x100000-0x7fed33ff could not be reserved
[ 0.295923] system 00:00: iomem range 0x7fed3400-0x7fefffff has been reserved
[ 0.295926] system 00:00: iomem range 0x7ff00000-0x7fffffff has been reserved
[ 0.295930] system 00:00: iomem range 0xffb00000-0xffffffff has been reserved
[ 0.295934] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 0.295938] system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 0.295941] system 00:00: iomem range 0xfed20000-0xfed9ffff has been reserved
[ 0.295945] system 00:00: iomem range 0xf0000000-0xf0003fff has been reserved
[ 0.295949] system 00:00: iomem range 0xf0004000-0xf0004fff has been reserved
[ 0.295952] system 00:00: iomem range 0xf0005000-0xf0005fff has been reserved
[ 0.295956] system 00:00: iomem range 0xf0006000-0xf0006fff has been reserved
[ 0.295960] system 00:00: iomem range 0xf0008000-0xf000bfff has been reserved
[ 0.295963] system 00:00: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.295972] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.295979] system 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 0.295983] system 00:03: ioport range 0x1080-0x10bf has been reserved
[ 0.295987] system 00:03: ioport range 0x10c0-0x10df has been reserved
[ 0.295991] system 00:03: ioport range 0x809-0x809 has been reserved
[ 0.296025] system 00:08: ioport range 0xc80-0xcff could not be reserved
[ 0.296028] system 00:08: ioport range 0x910-0x91f has been reserved
[ 0.296032] system 00:08: ioport range 0x920-0x92f has been reserved
[ 0.296035] system 00:08: ioport range 0xcb0-0xcbf has been reserved
[ 0.296038] system 00:08: ioport range 0x940-0x97f has been reserved
[ 0.330850] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.330855] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 0.330860] pci 0000:00:01.0: MEM window: 0xdfd00000-0xdfefffff
[ 0.330865] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.330871] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
[ 0.330875] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.330883] pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff
[ 0.330888] pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff
[ 0.330898] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
[ 0.330902] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.330909] pci 0000:00:1c.1: MEM window: 0xdfc00000-0xdfcfffff
[ 0.330915] pci 0000:00:1c.1: PREFETCH window: 0x00000080400000-0x000000805fffff
[ 0.330924] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d
[ 0.330928] pci 0000:00:1c.3: IO window: 0xd000-0xdfff
[ 0.330936] pci 0000:00:1c.3: MEM window: 0xdfa00000-0xdfbfffff
[ 0.330941] pci 0000:00:1c.3: PREFETCH window: 0x000000d0000000-0x000000d01fffff
[ 0.330951] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.330954] pci 0000:00:1e.0: IO window: disabled
[ 0.330961] pci 0000:00:1e.0: MEM window: 0xdf900000-0xdf9fffff
[ 0.330967] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.330989] alloc irq_desc for 16 on node -1
[ 0.330992] alloc kstat_irqs on node -1
[ 0.331001] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.331006] pci 0000:00:01.0: setting latency timer to 64
[ 0.331018] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.331023] pci 0000:00:1c.0: setting latency timer to 64
[ 0.331035] alloc irq_desc for 17 on node -1
[ 0.331037] alloc kstat_irqs on node -1
[ 0.331041] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.331047] pci 0000:00:1c.1: setting latency timer to 64
[ 0.331059] alloc irq_desc for 19 on node -1
[ 0.331061] alloc kstat_irqs on node -1Codice: Seleziona tutto
[code]
[ 0.331065] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.331071] pci 0000:00:1c.3: setting latency timer to 64
[ 0.331080] pci 0000:00:1e.0: setting latency timer to 64
[ 0.331087] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.331090] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.331093] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.331096] pci_bus 0000:01: resource 1 mem: [0xdfd00000-0xdfefffff]
[ 0.331100] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.331103] pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff]
[ 0.331106] pci_bus 0000:0b: resource 1 mem: [0x80000000-0x801fffff]
[ 0.331109] pci_bus 0000:0b: resource 2 pref mem [0x80200000-0x803fffff]
[ 0.331113] pci_bus 0000:0c: resource 0 io: [0x3000-0x3fff]
[ 0.331116] pci_bus 0000:0c: resource 1 mem: [0xdfc00000-0xdfcfffff]
[ 0.331119] pci_bus 0000:0c: resource 2 pref mem [0x80400000-0x805fffff]
[ 0.331122] pci_bus 0000:0d: resource 0 io: [0xd000-0xdfff]
[ 0.331125] pci_bus 0000:0d: resource 1 mem: [0xdfa00000-0xdfbfffff]
[ 0.331129] pci_bus 0000:0d: resource 2 pref mem [0xd0000000-0xd01fffff]
[ 0.331132] pci_bus 0000:03: resource 1 mem: [0xdf900000-0xdf9fffff]
[ 0.331135] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.331138] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.331189] NET: Registered protocol family 2
[ 0.331309] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.331693] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.332431] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.332805] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.332808] TCP reno registered
[ 0.332924] NET: Registered protocol family 1
[ 0.333071] pci 0000:01:00.0: Boot video device
[ 0.333112] Simple Boot Flag at 0x79 set to 0x1
[ 0.333317] cpufreq-nforce2: No nForce2 chipset.
[ 0.333350] Scanning for low memory corruption every 60 seconds
[ 0.333494] audit: initializing netlink socket (disabled)
[ 0.333506] type=2000 audit(1279088367.332:1): initialized
[ 0.345023] highmem bounce pool size: 64 pages
[ 0.345030] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.346950] VFS: Disk quotas dquot_6.5.2
[ 0.347022] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.347736] fuse init (API version 7.13)
[ 0.347842] msgmni has been set to 1690
[ 0.348124] alg: No test for stdrng (krng)
[ 0.348190] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.348194] io scheduler noop registered
[ 0.348196] io scheduler anticipatory registered
[ 0.348198] io scheduler deadline registered
[ 0.348250] io scheduler cfq registered (default)
[ 0.348418] alloc irq_desc for 24 on node -1
[ 0.348421] alloc kstat_irqs on node -1
[ 0.348431] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.348439] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.348568] alloc irq_desc for 25 on node -1
[ 0.348570] alloc kstat_irqs on node -1
[ 0.348580] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.348591] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.348756] alloc irq_desc for 26 on node -1
[ 0.348758] alloc kstat_irqs on node -1
[ 0.348768] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.348779] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.348946] alloc irq_desc for 27 on node -1
[ 0.348948] alloc kstat_irqs on node -1
[ 0.348958] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.348970] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.349090] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.349201] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.349696] ACPI: AC Adapter [AC] (on-line)
[ 0.349799] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.350209] ACPI: Lid Switch [LID]
[ 0.350264] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.350271] ACPI: Power Button [PBTN]
[ 0.350323] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.350326] ACPI: Sleep Button [SBTN]
[ 0.351054] ACPI: SSDT 7fed41f5 001AF (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.351425] ACPI: SSDT 7fed3faa 001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.351756] processor LNXCPU:00: registered as cooling_device0
[ 0.352191] ACPI: SSDT 7fed43a4 00090 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.352501] ACPI: SSDT 7fed4170 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.352943] processor LNXCPU:01: registered as cooling_device1
[ 0.358126] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.358136] ACPI: Thermal Zone [THM] (32 C)
[ 0.359823] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.361431] brd: module loaded
[ 0.362005] loop: module loaded
[ 0.362103] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.362215] ata_piix 0000:00:1f.2: version 2.13
[ 0.362237] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.362244] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 0.362294] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.368375] scsi0 : ata_piix
[ 0.368390] isapnp: Scanning for PnP cards...
[ 0.389086] scsi1 : ata_piix
[ 0.390390] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 0.390394] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 0.390813] Fixed MDIO Bus: probed
[ 0.390854] PPP generic driver version 2.4.2
[ 0.390913] tun: Universal TUN/TAP device driver, 1.6
[ 0.390915] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.391019] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.391046] alloc irq_desc for 20 on node -1
[ 0.391054] alloc kstat_irqs on node -1
[ 0.391062] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.391080] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.391084] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.391120] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.391144] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.391158] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.395061] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.395120] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
[ 0.398998] ACPI: Battery Slot [BAT0] (battery present)
[ 0.409015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.409114] usb usb1: configuration #1 chosen from 1 choice
[ 0.409150] hub 1-0:1.0: USB hub found
[ 0.409159] hub 1-0:1.0: 8 ports detected
[ 0.409238] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.409255] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.409288] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.409296] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.409301] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.409337] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.409365] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
[ 0.409474] usb usb2: configuration #1 chosen from 1 choice
[ 0.409504] hub 2-0:1.0: USB hub found
[ 0.409512] hub 2-0:1.0: 2 ports detected
[ 0.409564] alloc irq_desc for 21 on node -1
[ 0.409567] alloc kstat_irqs on node -1
[ 0.409572] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.409579] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.409583] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.409618] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.409655] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
[ 0.409760] usb usb3: configuration #1 chosen from 1 choice
[ 0.409790] hub 3-0:1.0: USB hub found
[ 0.409798] hub 3-0:1.0: 2 ports detected
[ 0.409848] alloc irq_desc for 22 on node -1
[ 0.409850] alloc kstat_irqs on node -1
[ 0.409855] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.409862] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.409866] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.409902] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.409939] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
[ 0.410046] usb usb4: configuration #1 chosen from 1 choice
[ 0.410076] hub 4-0:1.0: USB hub found
[ 0.410083] hub 4-0:1.0: 2 ports detected
[ 0.410134] alloc irq_desc for 23 on node -1
[ 0.410137] alloc kstat_irqs on node -1
[ 0.410142] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.410149] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.410153] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.410191] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.410228] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
[ 0.410331] usb usb5: configuration #1 chosen from 1 choice
[ 0.410361] hub 5-0:1.0: USB hub found
[ 0.410370] hub 5-0:1.0: 2 ports detected
[ 0.410482] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.413200] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.413208] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.413341] mice: PS/2 mouse device common for all mice
[ 0.413500] rtc_cmos 00:06: RTC can wake from S4
[ 0.413544] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.413578] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.413703] device-mapper: uevent: version 1.0.3
[ 0.469183] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.471425] Freeing initrd memory: 7782k freed
[ 0.475886] device-mapper: multipath: version 1.1.0 loaded
[ 0.475891] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.476122] EISA: Probing bus 0 at eisa.0
[ 0.476132] Cannot allocate resource for EISA slot 1
[ 0.476135] Cannot allocate resource for EISA slot 2
[ 0.476138] Cannot allocate resource for EISA slot 3
[ 0.476161] EISA: Detected 0 cards.
[ 0.476335] cpuidle: using governor ladder
[ 0.476476] cpuidle: using governor menu
[ 0.477039] TCP cubic registered
[ 0.477231] NET: Registered protocol family 10
[ 0.477777] lo: Disabled Privacy Extensions
[ 0.478165] NET: Registered protocol family 17
[ 0.478505] Using IPI No-Shortcut mode
[ 0.478618] PM: Resume from disk failed.
[ 0.478632] registered taskstats version 1
[ 0.479205] Magic number: 2:961:316
[ 0.479236] tty tty41: hash matches
[ 0.479330] rtc_cmos 00:06: setting system clock to 2010-07-14 06:19:27 UTC (1279088367)
[ 0.479334] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.479336] EDD information not available.
[ 0.480096] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.564886] ata1.00: failed to set max address (err_mask=0x1)
[ 0.564890] ata1.00: device aborted resize (192426570 -> 195371568), skipping HPA handling
[ 0.564896] ata1.00: ATA-7: Hitachi HTS721010G9SA00, MCZOC10H, max UDMA/100
[ 0.564900] ata1.00: 192426570 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 0.584376] ata1.00: configured for UDMA/100
[ 0.620417] ata2.00: ATAPI: SONY DVD+/-RW DW-Q58A, UDS1, max UDMA/33
[ 0.636322] ata2.00: configured for UDMA/33
[ 0.730900] isapnp: No Plug & Play device found
[ 0.731034] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72101 MCZO PQ: 0 ANSI: 5
[ 0.731198] sd 0:0:0:0: [sda] 192426570 512-byte logical blocks: (98.5 GB/91.7 GiB)
[ 0.731197] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.731266] sd 0:0:0:0: [sda] Write Protect is off
[ 0.731269] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.731351] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.731522] sda:
[ 0.731991] scsi 1:0:0:0: CD-ROM SONY DVD+-RW DW-Q58A UDS1 PQ: 0 ANSI: 5
[ 0.735542] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 0.735548] Uniform CD-ROM driver Revision: 3.20
[ 0.735716] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.735804] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 0.746954] sda1 sda2 sda3 sda4
[ 0.753101] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 0.779299] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.779313] Freeing unused kernel memory: 660k freed
[ 0.779760] Write protecting the kernel text: 4680k
[ 0.779824] Write protecting the kernel read-only data: 1840k
[ 0.797756] udev: starting version 151
[ 0.884521] usb 1-1: configuration #1 chosen from 1 choice
[ 0.884694] hub 1-1:1.0: USB hub found
[ 0.884784] hub 1-1:1.0: 4 ports detected
[ 0.960806] b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.020126] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[ 1.020174] ohci1394 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.021146] b44.c:v2.0
[ 1.041056] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:14:22:f0:4d:bf
[ 1.078080] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[df9fd800-df9fdfff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 1.180083] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 1.270591] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 1.363827] usb 3-2: configuration #1 chosen from 1 choice
[ 2.352273] ieee1394: Host added: ID:BUS[0-00:1023] GUID[384fc00016f81450]
[ 14.108943] udev: starting version 151
[ 14.159567] Adding 2313352k swap on /dev/sda4. Priority:-1 extents:1 across:2313352k
[ 14.274595] lp: driver loaded but no devices found
[ 14.309039] Linux agpgart interface v0.103
[ 14.399636] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:29/LNXVIDEO:00/input/input5
[ 14.399696] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 14.457449] cfg80211: Calling CRDA to update world regulatory domain
[ 14.462183] intel_rng: FWH not detected
[ 14.471816] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 14.476917] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 14.476920] ricoh-mmc: Copyright(c) Philip Langdale
[ 14.476952] ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 1)
[ 14.476971] ricoh-mmc: Controller is now disabled.
[ 14.502823] type=1505 audit(1279088381.521:2): operation="profile_load" pid=648 name="/sbin/dhclient3"
[ 14.503499] type=1505 audit(1279088381.521:3): operation="profile_load" pid=648 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 14.503807] cfg80211: World regulatory domain updated:
[ 14.503811] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.503814] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.503818] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.503821] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.503824] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.503827] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.503866] type=1505 audit(1279088381.521:4): operation="profile_load" pid=648 name="/usr/lib/connman/scripts/dhclient-script"
[ 14.506733] [drm] Initialized drm 1.1.0 20060810
[ 14.540149] sdhci: Secure Digital Host Controller Interface driver
[ 14.540154] sdhci: Copyright(c) Pierre Ossman
[ 14.579657] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 19)
[ 14.579679] alloc irq_desc for 18 on node -1
[ 14.579682] alloc kstat_irqs on node -1
[ 14.579690] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 14.581770] Registered led device: mmc0::
[ 14.582804] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
[ 14.585140] dell-wmi: No known WMI GUID found
[ 14.652911] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 14.652916] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 14.653039] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.653054] iwl3945 0000:0c:00.0: setting latency timer to 64
[ 14.658340] [drm] radeon defaulting to kernel modesetting.
[ 14.658343] [drm] radeon kernel modesetting enabled.
[ 14.658393] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.658402] radeon 0000:01:00.0: setting latency timer to 64
[ 14.660802] [drm] radeon: Initializing kernel modesetting.
[ 14.660897] [drm] register mmio base: 0xDFDF0000
[ 14.660900] [drm] register mmio size: 65536
[ 14.661092] ATOM BIOS: ATI
[ 14.661319] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[ 14.661354] [drm] Generation 2 PCI interface, using max accessible memory
[ 14.661357] [drm] radeon: VRAM 128M
[ 14.661359] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
[ 14.661362] [drm] radeon: GTT 512M
[ 14.661364] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[ 14.661431] [drm] radeon: irq initialized.
[ 14.666874] [drm] Detected VRAM RAM=128M, BAR=256M
[ 14.666877] [drm] RAM width 64bits DDR
[ 14.666969] [TTM] Zone kernel: Available graphics memory: 436946 kiB.
[ 14.666972] [TTM] Zone highmem: Available graphics memory: 1030268 kiB.
[ 14.666994] [drm] radeon: 128M of VRAM memory ready
[ 14.666996] [drm] radeon: 512M of GTT memory ready.
[ 14.667018] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 14.667421] usbcore: registered new interface driver hiddev
[ 14.669703] [drm] RB2D reset succeed (RBBM_STATUS=0x10000140)
[ 14.669802] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 14.671917] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[ 14.671967] [drm] radeon: cp idle (0x10000C03)
[ 14.672037] [drm] Loading R500 Microcode
[ 14.672278] platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
[ 14.689811] [drm] radeon: ring at 0x0000000020000000
[ 14.689880] [drm] ring test succeeded in 3 usecs
[ 14.690321] [drm] radeon: ib pool ready.
[ 14.690419] [drm] ib test succeeded in 0 usecs
[ 14.690576] [drm] Default TV standard: NTSC
[ 14.690656] [drm] Radeon Display Connectors
[ 14.690658] [drm] Connector 0:
[ 14.690660] [drm] VGA
[ 14.690663] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 14.690666] [drm] Encoders:
[ 14.690668] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 14.690670] [drm] Connector 1:
[ 14.690672] [drm] LVDS
[ 14.690675] [drm] DDC: 0x7e30 0x7e30 0x7e34 0x7e34 0x7e38 0x7e38 0x7e3c 0x7e3c
[ 14.690677] [drm] Encoders:
[ 14.690679] [drm] LCD1: INTERNAL_LVTM1
[ 14.690681] [drm] Connector 2:
[ 14.690683] [drm] S-video
[ 14.690685] [drm] Encoders:
[ 14.690687] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 14.690689] [drm] Connector 3:
[ 14.690690] [drm] DVI-I
[ 14.690692] [drm] HPD1
[ 14.690695] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 14.690697] [drm] Encoders:
[ 14.690699] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 14.690701] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 14.737109] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input6
[ 14.737248] generic-usb 0003:045E:00A4.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.1-2/input0
[ 14.737284] usbcore: registered new interface driver usbhid
[ 14.737288] usbhid: v2.6:USB HID core driver
[ 14.747647] iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 14.747652] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 14.747911] alloc irq_desc for 28 on node -1
[ 14.747914] alloc kstat_irqs on node -1
[ 14.747952] iwl3945 0000:0c:00.0: irq 28 for MSI/MSI-X
[ 14.796287] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 14.859242] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 14.859360] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 14.981996] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 14.982183] input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 15.225542] type=1505 audit(1279088382.244:5): operation="profile_load" pid=827 name="/usr/share/gdm/guest-session/Xsession"
[ 15.227373] type=1505 audit(1279088382.244:6): operation="profile_replace" pid=828 name="/sbin/dhclient3"
[ 15.228134] type=1505 audit(1279088382.248:7): operation="profile_replace" pid=828 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 15.228599] type=1505 audit(1279088382.248:8): operation="profile_replace" pid=828 name="/usr/lib/connman/scripts/dhclient-script"
[ 15.233271] type=1505 audit(1279088382.252:9): operation="profile_load" pid=830 name="/usr/bin/evince"
[ 15.243062] type=1505 audit(1279088382.260:10): operation="profile_load" pid=830 name="/usr/bin/evince-previewer"
[ 15.249251] type=1505 audit(1279088382.268:11): operation="profile_load" pid=830 name="/usr/bin/evince-thumbnailer"
[ 15.284017] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.304317] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/0x200000
[ 15.313032] [drm] fb mappable at 0xC00C0000
[ 15.313036] [drm] vram apper at 0xC0000000
[ 15.313038] [drm] size 9216000
[ 15.313040] [drm] fb depth is 24
[ 15.313042] [drm] pitch is 7680
[ 15.314733] fb0: radeondrmfb frame buffer device
[ 15.314736] registered panic notifier
[ 15.314744] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 15.317828] vga16fb: initializing
[ 15.317833] vga16fb: mapped to 0xc00a0000
[ 15.317837] vga16fb: not registering due to another framebuffer present
[ 15.344228] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 15.608101] Console: switching to colour frame buffer device 240x75
[ 18.805200] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 18.805204] b44: eth0: Flow control is off for TX and off for RX.
[ 18.805505] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.225257] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 19.225261] vboxdrv: Successfully done.
[ 19.225263] vboxdrv: Found 2 processor cores.
[ 19.225395] vboxdrv: fAsync=1 offMin=0xaef5ab40 offMax=0xaef5ab40
[ 19.225915] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 19.225919] vboxdrv: Successfully loaded version 3.2.6 (interface 0x00140001).
[ 19.496078] ppdev: user-space parallel port driver
[ 29.056117] eth0: no IPv6 routers present
[ 251.876989] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[ 262.854549] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 308.112324] CE: hpet increasing min_delta_ns to 15000 nsec
[ 308.112324] CE: hpet increasing min_delta_ns to 22500 nsec
[ 308.112324] CE: hpet increasing min_delta_ns to 33750 nsec
[ 308.116430] CE: hpet increasing min_delta_ns to 50624 nsec
[ 308.116430] CE: hpet increasing min_delta_ns to 75936 nsec
[ 308.116430] CE: hpet increasing min_delta_ns to 113904 nsec
[ 353.259182] b44: eth0: powering down PHY
[ 353.989102] b44: eth0: Link is down.
[ 355.989232] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 355.989237] b44: eth0: Flow control is off for TX and off for RX.
[ 356.597545] CE: hpet increasing min_delta_ns to 170856 nsec
[ 356.669160] b44: eth0: powering down PHY
[ 356.989103] b44: eth0: Link is down.
[ 359.989191] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 359.989195] b44: eth0: Flow control is off for TX and off for RX.
[ 454.796097] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 500.664273] hrtimer: interrupt took 7764465 ns
[ 521.289400] CE: hpet increasing min_delta_ns to 256284 nsec
[ 553.800111] CE: hpet increasing min_delta_ns to 384426 nsec
[ 631.913500] b44: eth0: powering down PHY
[ 631.989111] b44: eth0: Link is down.
[ 634.989105] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 634.989112] b44: eth0: Flow control is off for TX and off for RX.
[ 681.299813] CE: hpet increasing min_delta_ns to 576638 nsec
[ 916.560571] CE: hpet increasing min_delta_ns to 864956 nsec
[ 1169.876012] CE: hpet increasing min_delta_ns to 1297434 nsec
[ 1234.255169] b44: eth0: powering down PHY
[ 1234.989115] b44: eth0: Link is down.
[ 1236.989199] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1236.989203] b44: eth0: Flow control is off for TX and off for RX.
[ 2351.381696] Adding 1052248k swap on /dev/sda4. Priority:-1 extents:1 across:1052248k
[ 2402.654460] b44: eth0: powering down PHY
[ 2402.989128] b44: eth0: Link is down.
[ 2405.989212] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 2405.989218] b44: eth0: Flow control is off for TX and off for RX.
[ 2881.791113] Adding 1052248k swap on /dev/sda4. Priority:-1 extents:1 across:1052248k
[ 2904.068022] CE: hpet increasing min_delta_ns to 1946150 nsec
[ 3801.901175] b44: eth0: powering down PHY
[ 3801.989123] b44: eth0: Link is down.
[ 3804.989253] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 3804.989261] b44: eth0: Flow control is off for TX and off for RX.
[ 3805.667830] b44: eth0: powering down PHY
[ 3805.989539] b44: eth0: Link is down.
[ 3808.989723] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 3808.989727] b44: eth0: Flow control is off for TX and off for RX.
[ 3812.717075] b44: eth0: powering down PHY
[ 3812.989759] b44: eth0: Link is down.
[ 3815.989549] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 3815.989556] b44: eth0: Flow control is off for TX and off for RX.
[ 3843.342039] b44: eth0: powering down PHY
[ 3843.989100] b44: eth0: Link is down.
[ 3846.989965] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 3846.989972] b44: eth0: Flow control is off for TX and off for RX.
[ 3978.591779] b44: eth0: powering down PHY
[ 3978.989120] b44: eth0: Link is down.
[ 3981.989190] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 3981.989194] b44: eth0: Flow control is off for TX and off for RX.
stefano@stefano-laptop:~$

Codice: Seleziona tutto
[ 3978.591779] b44: eth0: powering down PHY
[ 3978.989120] b44: eth0: Link is down.
[ 3981.989190] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 3981.989194] b44: eth0: Flow control is off for TX and off for RX.Codice: Seleziona tutto
sudo ifconfig eth0 downCodice: Seleziona tutto
[ 1236.828817] b44: eth0: powering down PHY
[ 1237.000108] b44: eth0: Link is down.
[ 1240.000193] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1240.000197] b44: eth0: Flow control is off for TX and off for RX.
[ 1241.412466] b44: eth0: powering down PHY
[ 1242.000111] b44: eth0: Link is down.
[ 1245.000998] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1245.001005] b44: eth0: Flow control is off for TX and off for RX.
[ 1246.013582] b44: eth0: powering down PHY
[ 1247.000108] b44: eth0: Link is down.
[ 1249.002106] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1249.002113] b44: eth0: Flow control is off for TX and off for RX.
[ 1250.744704] b44: eth0: powering down PHY
[ 1251.001139] b44: eth0: Link is down.
[ 1254.001235] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1254.001242] b44: eth0: Flow control is off for TX and off for RX.
[ 1255.527142] b44: eth0: powering down PHY
[ 1256.001969] b44: eth0: Link is down.
[ 1259.001420] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1259.001424] b44: eth0: Flow control is off for TX and off for RX.
[ 1260.131919] b44: eth0: powering down PHY
[ 1261.000237] b44: eth0: Link is down.
[ 1263.004203] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1263.004211] b44: eth0: Flow control is off for TX and off for RX.
[ 1264.830432] b44: eth0: powering down PHY
[ 1265.001564] b44: eth0: Link is down.
[ 1268.000241] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1268.000248] b44: eth0: Flow control is off for TX and off for RX.
[ 1269.534527] b44: eth0: powering down PHY
[ 1270.000120] b44: eth0: Link is down.
[ 1273.000743] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1273.000750] b44: eth0: Flow control is off for TX and off for RX.
[ 1274.022883] b44: eth0: powering down PHY
[ 1275.000143] b44: eth0: Link is down.
[ 1277.000198] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1277.000205] b44: eth0: Flow control is off for TX and off for RX.
[ 1278.876177] b44: eth0: powering down PHY
[ 1279.001408] b44: eth0: Link is down.
[ 1282.000746] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1282.000753] b44: eth0: Flow control is off for TX and off for RX.
[ 1283.523244] b44: eth0: powering down PHY
[ 1284.000116] b44: eth0: Link is down.
[ 1287.000555] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1287.000562] b44: eth0: Flow control is off for TX and off for RX.
[ 1288.030176] b44: eth0: powering down PHY
[ 1289.000469] b44: eth0: Link is down.
[ 1291.001147] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1291.001154] b44: eth0: Flow control is off for TX and off for RX.
[ 1292.672269] b44: eth0: powering down PHY
[ 1293.002045] b44: eth0: Link is down.
[ 1296.002047] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1296.002054] b44: eth0: Flow control is off for TX and off for RX.
[ 1297.258644] b44: eth0: powering down PHY
[ 1298.000692] b44: eth0: Link is down.
[ 1300.000194] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1300.000198] b44: eth0: Flow control is off for TX and off for RX.
[ 1301.715979] b44: eth0: powering down PHY
[ 1302.002936] b44: eth0: Link is down.
[ 1305.001976] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1305.001983] b44: eth0: Flow control is off for TX and off for RX.
[ 1306.182175] b44: eth0: powering down PHY
[ 1307.000870] b44: eth0: Link is down.
[ 1309.000227] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1309.000235] b44: eth0: Flow control is off for TX and off for RX.
[ 1310.821187] b44: eth0: powering down PHY
[ 1311.001071] b44: eth0: Link is down.
[ 1314.000973] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1314.000978] b44: eth0: Flow control is off for TX and off for RX.
[ 1315.390910] b44: eth0: powering down PHY
[ 1316.000402] b44: eth0: Link is down.
[ 1319.001656] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1319.001662] b44: eth0: Flow control is off for TX and off for RX.
[ 1320.021930] b44: eth0: powering down PHY
[ 1321.000123] b44: eth0: Link is down.
[ 1323.000203] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1323.000211] b44: eth0: Flow control is off for TX and off for RX.
[ 1324.562982] b44: eth0: powering down PHY
[ 1325.000606] b44: eth0: Link is down.
[ 1328.001691] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1328.001698] b44: eth0: Flow control is off for TX and off for RX.
[ 1329.140895] b44: eth0: powering down PHY
[ 1330.001886] b44: eth0: Link is down.
[ 1332.001579] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1332.001586] b44: eth0: Flow control is off for TX and off for RX.
[ 2216.363749] b44: eth0: powering down PHY
[ 2217.000843] b44: eth0: Link is down.
[ 2220.001972] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 2220.001979] b44: eth0: Flow control is off for TX and off for RX.
[ 2905.388311] b44: eth0: powering down PHY

Codice: Seleziona tutto
lsmod |grep b44Codice: Seleziona tutto
sudo rmmod nome_moduloCodice: Seleziona tutto
free -m
total used free shared buffers cached
Mem: 2012 1949 62 0 3 73
-/+ buffers/cache: 1872 140
Swap: 2384 97 2287


Ma ??? Non avevamo finito.... come si è risolto?jerico ha scritto: Pieddu i miei complimenti! (b2b)

Codice: Seleziona tutto
lsmodCodice: Seleziona tutto
Module Size Used by
binfmt_misc 6587 1
ppdev 5259 0
vboxnetadp 6326 0
vboxnetflt 15162 0
vboxdrv 190594 2 vboxnetadp,vboxnetflt
fbcon 35102 71
tileblit 2031 1 fbcon
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
vga16fb 11385 0
vgastate 8961 1 vga16fb
joydev 8708 0
snd_hda_codec_idt 51978 1
snd_hda_intel 21941 2
snd_hda_codec 74201 2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep 5412 1 snd_hda_codec
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_pcm 70662 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 1338 0
snd_seq_oss 26726 0
snd_seq_midi 4557 0
snd_rawmidi 19056 1 snd_seq_midi
arc4 1153 2
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
iwl3945 68727 0
snd_timer 19098 2 snd_pcm,snd_seq
snd_seq_device 5700 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
radeon 674824 3
usbhid 36110 0
iwlcore 105922 1 iwl3945
ttm 49943 1 radeon
dell_wmi 1793 0
snd 54148 16 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
mac80211 205146 2 iwl3945,iwlcore
sdhci_pci 5470 0
psmouse 63245 0
hid 67032 1 usbhid
soundcore 6620 1 snd
dell_laptop 6856 0
dcdbas 5422 1 dell_laptop
sdhci 15462 1 sdhci_pci
led_class 2864 3 iwl3945,iwlcore,sdhci
drm_kms_helper 29297 1 radeon
serio_raw 3978 0
cfg80211 126517 3 iwl3945,iwlcore,mac80211
video 17375 0
output 1871 1 video
drm 162377 5 radeon,ttm,drm_kms_helper
i2c_algo_bit 5028 1 radeon
lp 7028 0
snd_page_alloc 7076 2 snd_hda_intel,snd_pcm
intel_agp 24119 0
agpgart 31724 3 ttm,drm,intel_agp
parport 32635 2 ppdev,lp
b44 25574 0
ssb 38671 1 b44
mii 4381 1 b44
ohci1394 26950 0
ieee1394 81181 1 ohci1394

Codice: Seleziona tutto
[ 1327.724149] CE: hpet increasing min_delta_ns to 1946150 nsec
[ 1446.630035] b44: eth0: powering down PHY
[ 1446.995998] b44: eth0: Link is down.
[ 1448.512409] CE: hpet increasing min_delta_ns to 2919224 nsec
[ 1449.989203] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1449.989207] b44: eth0: Flow control is off for TX and off for RX.
[ 1450.302782] b44: eth0: powering down PHY
[ 1450.989099] b44: eth0: Link is down.
[ 1452.996084] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1452.996084] b44: eth0: Flow control is off for TX and off for RX.
[ 1454.101944] b44: eth0: powering down PHY
[ 1454.989111] b44: eth0: Link is down.
[ 1456.989197] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1456.989201] b44: eth0: Flow control is off for TX and off for RX.
[ 1457.376463] b44: eth0: powering down PHY
[ 1457.989103] b44: eth0: Link is down.
[ 1460.989215] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1460.989223] b44: eth0: Flow control is off for TX and off for RX.
[ 1462.302768] b44: eth0: powering down PHY
[ 1462.988156] b44: eth0: Link is down.
[ 1464.988579] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1464.988586] b44: eth0: Flow control is off for TX and off for RX.
[ 1467.012420] b44: eth0: powering down PHY
[ 1467.374107] CE: hpet increasing min_delta_ns to 4378836 nsec
[ 1467.988120] b44: eth0: Link is down.
[ 1469.988240] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1469.988247] b44: eth0: Flow control is off for TX and off for RX.
[ 1471.905707] b44: eth0: powering down PHY
[ 1471.989560] b44: eth0: Link is down.
[ 1474.989203] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1474.989210] b44: eth0: Flow control is off for TX and off for RX.
[ 1476.222593] b44: eth0: powering down PHY
[ 1476.989405] b44: eth0: Link is down.
[ 1478.996789] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1478.996896] b44: eth0: Flow control is off for TX and off for RX.
[ 1480.031331] b44: eth0: powering down PHY
[ 1480.988153] b44: eth0: Link is down.
[ 1482.991431] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1482.991438] b44: eth0: Flow control is off for TX and off for RX.
[ 1484.414464] b44: eth0: powering down PHY
[ 1484.990738] b44: eth0: Link is down.
[ 1487.988407] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1487.988414] b44: eth0: Flow control is off for TX and off for RX.
[ 1488.591860] b44: eth0: powering down PHY
[ 1488.989297] b44: eth0: Link is down.
[ 1491.990035] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1491.990042] b44: eth0: Flow control is off for TX and off for RX.
[ 1492.937673] b44: eth0: powering down PHY
[ 1492.989856] b44: eth0: Link is down.
[ 1495.989215] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1495.989222] b44: eth0: Flow control is off for TX and off for RX.
[ 1497.402702] b44: eth0: powering down PHY
[ 1497.989445] b44: eth0: Link is down.
[ 1500.988298] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1500.988305] b44: eth0: Flow control is off for TX and off for RX.
[ 1501.766034] b44: eth0: powering down PHY
[ 1501.990331] b44: eth0: Link is down.
[ 1504.990539] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1504.990546] b44: eth0: Flow control is off for TX and off for RX.
[ 1505.846624] b44: eth0: powering down PHY
[ 1505.995075] b44: eth0: Link is down.
[ 1508.989506] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1508.989513] b44: eth0: Flow control is off for TX and off for RX.
[ 1509.678659] b44: eth0: powering down PHY
[ 1509.989181] b44: eth0: Link is down.
[ 1512.989367] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1512.989375] b44: eth0: Flow control is off for TX and off for RX.
[ 1513.526235] b44: eth0: powering down PHY
[ 1513.988157] b44: eth0: Link is down.
[ 1516.989216] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1516.989221] b44: eth0: Flow control is off for TX and off for RX.
[ 1518.151425] b44: eth0: powering down PHY
[ 1518.989135] b44: eth0: Link is down.
[ 1520.989338] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1520.989345] b44: eth0: Flow control is off for TX and off for RX.
[ 1521.935393] b44: eth0: powering down PHY
[ 1521.989110] b44: eth0: Link is down.
[ 1524.989240] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1524.989247] b44: eth0: Flow control is off for TX and off for RX.
[ 1525.678634] b44: eth0: powering down PHY
[ 1525.989247] b44: eth0: Link is down.
[ 1528.989741] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1528.989748] b44: eth0: Flow control is off for TX and off for RX.
[ 1529.610047] b44: eth0: powering down PHY
[ 1529.991641] b44: eth0: Link is down.
[ 1532.989705] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1532.989712] b44: eth0: Flow control is off for TX and off for RX.
[ 1535.551996] b44: eth0: powering down PHY
[ 1535.988501] b44: eth0: Link is down.
[ 1538.989007] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1538.989014] b44: eth0: Flow control is off for TX and off for RX.
[ 1540.298712] b44: eth0: powering down PHY
[ 1540.989103] b44: eth0: Link is down.
[ 1543.988296] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1543.988303] b44: eth0: Flow control is off for TX and off for RX.
[ 1555.231434] b44: eth0: powering down PHY
[ 1555.989273] b44: eth0: Link is down.
[ 1557.989205] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1557.989212] b44: eth0: Flow control is off for TX and off for RX.
[ 1562.459427] b44: eth0: powering down PHY
[ 1562.991970] b44: eth0: Link is down.
[ 1565.995937] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1565.995937] b44: eth0: Flow control is off for TX and off for RX.
[ 1566.983511] b44: eth0: powering down PHY
[ 1566.999381] b44: eth0: Link is down.
[ 1569.989706] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1569.989713] b44: eth0: Flow control is off for TX and off for RX.
[ 1572.949077] b44: eth0: powering down PHY
[ 1572.989191] b44: eth0: Link is down.
[ 1575.990062] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1575.990068] b44: eth0: Flow control is off for TX and off for RX.
[ 1579.440821] b44: eth0: powering down PHY
[ 1579.989178] b44: eth0: Link is down.
[ 1582.989868] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1582.989875] b44: eth0: Flow control is off for TX and off for RX.
[ 1584.829559] b44: eth0: powering down PHY
[ 1584.991091] b44: eth0: Link is down.
[ 1587.989537] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1587.989544] b44: eth0: Flow control is off for TX and off for RX.
[ 2128.113251] b44: eth0: powering down PHY
[ 2128.988223] b44: eth0: Link is down.
[ 2130.989607] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 2130.989614] b44: eth0: Flow control is off for TX and off for RX.
[ 2197.784378] b44: eth0: powering down PHY
[ 2197.988404] b44: eth0: Link is down.
[ 2200.989609] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 2200.989616] b44: eth0: Flow control is off for TX and off for RX.

Codice: Seleziona tutto
[ 1327.724149] CE: hpet increasing min_delta_ns to 1946150 nsec
[ 1446.630035] b44: eth0: powering down PHY
[ 1446.995998] b44: eth0: Link is down.
[ 1448.512409] CE: hpet increasing min_delta_ns to 2919224 nsec
[ 1449.989203] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1449.989207] b44: eth0: Flow control is off for TX and off for RX.
[ 1450.302782] b44: eth0: powering down PHY
[ 1450.989099] b44: eth0: Link is down.
[ 1452.996084] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1452.996084] b44: eth0: Flow control is off for TX and off for RX.
[ 1454.101944] b44: eth0: powering down PHY
[ 1454.989111] b44: eth0: Link is down.
[ 1456.989197] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1456.989201] b44: eth0: Flow control is off for TX and off for RX.
[ 1457.376463] b44: eth0: powering down PHY
[ 1457.989103] b44: eth0: Link is down.
[ 1460.989215] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1460.989223] b44: eth0: Flow control is off for TX and off for RX.
[ 1462.302768] b44: eth0: powering down PHY
[ 1462.988156] b44: eth0: Link is down.
[ 1464.988579] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1464.988586] b44: eth0: Flow control is off for TX and off for RX.
[ 1467.012420] b44: eth0: powering down PHY
[ 1467.374107] CE: hpet increasing min_delta_ns to 4378836 nsec
[ 1467.988120] b44: eth0: Link is down.
[ 1469.988240] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1469.988247] b44: eth0: Flow control is off for TX and off for RX.
[ 1471.905707] b44: eth0: powering down PHY
[ 1471.989560] b44: eth0: Link is down.
[ 1474.989203] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1474.989210] b44: eth0: Flow control is off for TX and off for RX.
[ 1476.222593] b44: eth0: powering down PHY
[ 1476.989405] b44: eth0: Link is down.
[ 1478.996789] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1478.996896] b44: eth0: Flow control is off for TX and off for RX.
[ 1480.031331] b44: eth0: powering down PHY
[ 1480.988153] b44: eth0: Link is down.
[ 1482.991431] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1482.991438] b44: eth0: Flow control is off for TX and off for RX.
[ 1484.414464] b44: eth0: powering down PHY
[ 1484.990738] b44: eth0: Link is down.
[ 1487.988407] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1487.988414] b44: eth0: Flow control is off for TX and off for RX.
[ 1488.591860] b44: eth0: powering down PHY
[ 1488.989297] b44: eth0: Link is down.
[ 1491.990035] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1491.990042] b44: eth0: Flow control is off for TX and off for RX.
[ 1492.937673] b44: eth0: powering down PHY
[ 1492.989856] b44: eth0: Link is down.
[ 1495.989215] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1495.989222] b44: eth0: Flow control is off for TX and off for RX.
[ 1497.402702] b44: eth0: powering down PHY
[ 1497.989445] b44: eth0: Link is down.
[ 1500.988298] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1500.988305] b44: eth0: Flow control is off for TX and off for RX.
[ 1501.766034] b44: eth0: powering down PHY
[ 1501.990331] b44: eth0: Link is down.
[ 1504.990539] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1504.990546] b44: eth0: Flow control is off for TX and off for RX.
[ 1505.846624] b44: eth0: powering down PHY
[ 1505.995075] b44: eth0: Link is down.
[ 1508.989506] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1508.989513] b44: eth0: Flow control is off for TX and off for RX.
[ 1509.678659] b44: eth0: powering down PHY
[ 1509.989181] b44: eth0: Link is down.
[ 1512.989367] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1512.989375] b44: eth0: Flow control is off for TX and off for RX.
[ 1513.526235] b44: eth0: powering down PHY
[ 1513.988157] b44: eth0: Link is down.
[ 1516.989216] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1516.989221] b44: eth0: Flow control is off for TX and off for RX.
[ 1518.151425] b44: eth0: powering down PHY
[ 1518.989135] b44: eth0: Link is down.
[ 1520.989338] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1520.989345] b44: eth0: Flow control is off for TX and off for RX.
[ 1521.935393] b44: eth0: powering down PHY
[ 1521.989110] b44: eth0: Link is down.
[ 1524.989240] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1524.989247] b44: eth0: Flow control is off for TX and off for RX.
[ 1525.678634] b44: eth0: powering down PHY
[ 1525.989247] b44: eth0: Link is down.
[ 1528.989741] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1528.989748] b44: eth0: Flow control is off for TX and off for RX.
[ 1529.610047] b44: eth0: powering down PHY
[ 1529.991641] b44: eth0: Link is down.
[ 1532.989705] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1532.989712] b44: eth0: Flow control is off for TX and off for RX.
[ 1535.551996] b44: eth0: powering down PHY
[ 1535.988501] b44: eth0: Link is down.
[ 1538.989007] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1538.989014] b44: eth0: Flow control is off for TX and off for RX.
[ 1540.298712] b44: eth0: powering down PHY
[ 1540.989103] b44: eth0: Link is down.
[ 1543.988296] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1543.988303] b44: eth0: Flow control is off for TX and off for RX.
[ 1555.231434] b44: eth0: powering down PHY
[ 1555.989273] b44: eth0: Link is down.
[ 1557.989205] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1557.989212] b44: eth0: Flow control is off for TX and off for RX.
[ 1562.459427] b44: eth0: powering down PHY
[ 1562.991970] b44: eth0: Link is down.
[ 1565.995937] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1565.995937] b44: eth0: Flow control is off for TX and off for RX.
[ 1566.983511] b44: eth0: powering down PHY
[ 1566.999381] b44: eth0: Link is down.
[ 1569.989706] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1569.989713] b44: eth0: Flow control is off for TX and off for RX.
[ 1572.949077] b44: eth0: powering down PHY
[ 1572.989191] b44: eth0: Link is down.
[ 1575.990062] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1575.990068] b44: eth0: Flow control is off for TX and off for RX.
[ 1579.440821] b44: eth0: powering down PHY
[ 1579.989178] b44: eth0: Link is down.
[ 1582.989868] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1582.989875] b44: eth0: Flow control is off for TX and off for RX.
[ 1584.829559] b44: eth0: powering down PHY
[ 1584.991091] b44: eth0: Link is down.
[ 1587.989537] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 1587.989544] b44: eth0: Flow control is off for TX and off for RX.
[ 2128.113251] b44: eth0: powering down PHY
[ 2128.988223] b44: eth0: Link is down.
[ 2130.989607] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 2130.989614] b44: eth0: Flow control is off for TX and off for RX.
[ 2197.784378] b44: eth0: powering down PHY
[ 2197.988404] b44: eth0: Link is down.
[ 2200.989609] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 2200.989616] b44: eth0: Flow control is off for TX and off for RX.
Visualizzano questa sezione: Bing [Bot] e 12 ospiti