montare un HDD con S:O. diverso

Riconoscimento, installazione e configurazione delle periferiche.
Avatar utente
fenics
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 640
Iscrizione: giovedì 20 agosto 2009, 10:09
Contatti:

montare un HDD con S:O. diverso

Messaggio da fenics »

Dovrei fare una prova ad un mio amico collegando un dispositivo di memoria di massa usb con S.O. mac sul mio computer con linux. Mi dice impossibioe montare il dispositivo. C' è un opzione che per permette di fare questo??
Avatar utente
fenics
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 640
Iscrizione: giovedì 20 agosto 2009, 10:09
Contatti:

Re: montare un HDD con S:O. diverso

Messaggio da fenics »

qualcuno lo sa??
Avatar utente
pieddu
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 13453
Iscrizione: sabato 11 novembre 2006, 21:46
Desktop: Mate XFCE
Distribuzione: Devuan Trisquel
Sesso: Maschile
Località: Serravalle di Chienti (Taverne)

Re: montare un HDD con S:O. diverso

Messaggio da pieddu »

forse bisognerà montarla a mano per via del filesystem del mac (hfs)...
che dicono le ultime righe di

Codice: Seleziona tutto

dmesg
subito dopo l'inserimento della chiavetta?
:birra:
Avatar utente
fenics
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 640
Iscrizione: giovedì 20 agosto 2009, 10:09
Contatti:

Re: montare un HDD con S:O. diverso

Messaggio da fenics »

montarla a mano che significa scusami?
Avatar utente
pieddu
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 13453
Iscrizione: sabato 11 novembre 2006, 21:46
Desktop: Mate XFCE
Distribuzione: Devuan Trisquel
Sesso: Maschile
Località: Serravalle di Chienti (Taverne)

Re: montare un HDD con S:O. diverso

Messaggio da pieddu »

significa, andando per gradi, postare l'output del comando che ti ho postato sopra, poi da un terminale, tramite il comando "mount", montarla....
:birra:
Avatar utente
fenics
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 640
Iscrizione: giovedì 20 agosto 2009, 10:09
Contatti:

Re: montare un HDD con S:O. diverso

Messaggio da fenics »

ah ok, ho capito. Lo posterò quanto prima, ora purtroppo ho da fare. Cmnq per ora grazie. A più tardi.
Avatar utente
fenics
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 640
Iscrizione: giovedì 20 agosto 2009, 10:09
Contatti:

Re: montare un HDD con S:O. diverso

Messaggio da fenics »

mamma mia è una sfilza che non finisce più. Ecco quà, sarà normale??
[    0.022249] SMP alternatives: switching to UP code
[    0.039651] Freeing SMP alternatives: 40k freed
[    0.039692] ACPI: Core revision 20090903
[    0.047552] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.047568] ftrace: allocating 22524 entries in 89 pages
[    0.050142] Setting APIC routing to flat
[    0.050955] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.155269] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00
[    0.160000] Brought up 1 CPUs
[    0.160000] Total of 1 processors activated (3999.72 BogoMIPS).
[    0.160000] CPU0 attaching NULL sched-domain.
[    0.160000] devtmpfs: initialized
[    0.160000] regulator: core version 0.5
[    0.160000] Time: 12:53:31  Date: 07/16/10
[    0.160000] NET: Registered protocol family 16
[    0.160000] node 0 link 0: io port [1000, fffff]
[    0.160000] TOM: 0000000040000000 aka 1024M
[    0.160000] node 0 link 0: mmio [a0000, bffff]
[    0.160000] node 0 link 0: mmio [40000000, ffb7ffff]
[    0.160000] bus: [00,ff] on node 0 link 0
[    0.160000] bus: 00 index 0 io port: [0, ffff]
[    0.160000] bus: 00 index 1 mmio: [a0000, bffff]
[    0.160000] bus: 00 index 2 mmio: [40000000, fcffffffff]
[    0.160000] ACPI: bus type pci registered
[    0.160000] PCI: Using configuration type 1 for base access
[    0.160000] bio: create slab at 0
[    0.160000] ACPI: EC: Look up EC in DSDT
[    0.160000] ACPI Warning: Package List length (0x5) larger than NumElements count (0x3), truncated
[    0.160000]  (20090903/dsobject-515)
[    0.160000] ACPI: Interpreter enabled
[    0.160000] ACPI: (supports S0 S1 S4 S5)
[    0.160000] ACPI: Using IOAPIC for interrupt routing
[    0.163201] ACPI: No dock devices found.
[    0.163316] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.163368] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe3ffffff]
[    0.163601] pci 0000:00:01.0: supports D1
[    0.163637] pci 0000:00:0b.0: reg 10 32bit mmio: [0xe8000000-0xe800ffff]
[    0.163644] pci 0000:00:0b.0: reg 14 io port: [0x9000-0x9007]
[    0.163675] pci 0000:00:0b.0: PME# supported from D3hot D3cold
[    0.163679] pci 0000:00:0b.0: PME# disabled
[    0.163711] pci 0000:00:0f.0: reg 10 io port: [0x9400-0x9407]
[    0.163716] pci 0000:00:0f.0: reg 14 io port: [0x9800-0x9803]
[    0.163722] pci 0000:00:0f.0: reg 18 io port: [0x9c00-0x9c07]
[    0.163728] pci 0000:00:0f.0: reg 1c io port: [0xa000-0xa003]
[    0.163734] pci 0000:00:0f.0: reg 20 io port: [0xa400-0xa40f]
[    0.163740] pci 0000:00:0f.0: reg 24 io port: [0xa800-0xa8ff]
[    0.163800] pci 0000:00:0f.1: reg 20 io port: [0xac00-0xac0f]
[    0.163869] pci 0000:00:10.0: reg 20 io port: [0xb000-0xb01f]
[    0.163891] pci 0000:00:10.0: supports D1 D2
[    0.163893] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.163897] pci 0000:00:10.0: PME# disabled
[    0.163939] pci 0000:00:10.1: reg 20 io port: [0xb400-0xb41f]
[    0.163962] pci 0000:00:10.1: supports D1 D2
[    0.163964] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.163968] pci 0000:00:10.1: PME# disabled
[    0.164009] pci 0000:00:10.2: reg 20 io port: [0xb800-0xb81f]
[    0.164032] pci 0000:00:10.2: supports D1 D2
[    0.164034] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.164038] pci 0000:00:10.2: PME# disabled
[    0.164079] pci 0000:00:10.3: reg 20 io port: [0xbc00-0xbc1f]
[    0.164102] pci 0000:00:10.3: supports D1 D2
[    0.164104] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.164107] pci 0000:00:10.3: PME# disabled
[    0.164136] pci 0000:00:10.4: reg 10 32bit mmio: [0xe8010000-0xe80100ff]
[    0.164171] pci 0000:00:10.4: supports D1 D2
[    0.164174] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.164177] pci 0000:00:10.4: PME# disabled
[    0.164229] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.164275] pci 0000:00:11.5: reg 10 io port: [0xc000-0xc0ff]
[    0.164311] pci 0000:00:11.5: supports D1 D2
[    0.164343] pci 0000:00:13.0: reg 10 io port: [0xc400-0xc4ff]
[    0.164349] pci 0000:00:13.0: reg 14 32bit mmio: [0xe8011000-0xe80110ff]
[    0.164381] pci 0000:00:13.0: supports D1 D2
[    0.164383] pci 0000:00:13.0: PME# supported from D1 D2 D3hot D3cold
[    0.164387] pci 0000:00:13.0: PME# disabled
[    0.164481] pci 0000:01:00.0: reg 10 32bit mmio: [0xe6000000-0xe6ffffff]
[    0.164486] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xe4000000-0xe5ffffff]
[    0.164498] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[    0.164536] pci 0000:00:01.0: bridge 32bit mmio: [0xe6000000-0xe7ffffff]
[    0.164540] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe4000000-0xe5ffffff]
[    0.164550] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.207999] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[    0.208158] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[    0.208322] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[    0.208485] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
[    0.208618] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.208745] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.208872] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.208998] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.209198] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[    0.209398] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[    0.209618] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[    0.209817] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
[    0.209950] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.209953] vgaarb: loaded
[    0.210087] SCSI subsystem initialized
[    0.210201] libata version 3.00 loaded.
[    0.210280] usbcore: registered new interface driver usbfs
[    0.210300] usbcore: registered new interface driver hub
[    0.210328] usbcore: registered new device driver usb
[    0.210458] ACPI: WMI: Mapper loaded
[    0.210460] PCI: Using ACPI for IRQ routing
[    0.210471] pci 0000:00:00.0: BAR 0: address space collision on of device [0xe0000000-0xe3ffffff]
[    0.210474] pci 0000:00:00.0: BAR 0: can't allocate resource
[    0.210635] NetLabel: Initializing
[    0.210637] NetLabel:  domain hash size = 128
[    0.210638] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.210655] NetLabel:  unlabeled traffic allowed by default
[    0.210707] Switching to clocksource tsc
[    0.212753] AppArmor: AppArmor Filesystem Enabled
[    0.212782] pnp: PnP ACPI init
[    0.212812] ACPI: bus type pnp registered
[    0.213175] pnp 00:00: mem resource (0xf0000-0xf3fff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
[    0.213179] pnp 00:00: mem resource (0xf4000-0xf7fff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
[    0.213183] pnp 00:00: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
[    0.213186] pnp 00:00: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
[    0.213190] pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
[    0.213194] pnp 00:00: mem resource (0x100000-0x3ffeffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
[    0.216509] pnp: PnP ACPI: found 14 devices
[    0.216511] ACPI: ACPI bus type pnp unregistered
[    0.216526] system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved
[    0.216529] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
[    0.216532] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.216536] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.216539] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[    0.216545] system 00:02: ioport range 0x4000-0x407f has been reserved
[    0.216548] system 00:02: ioport range 0x40f0-0x40ff has been reserved
[    0.216551] system 00:02: ioport range 0x5000-0x500f has been reserved
[    0.216557] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[    0.216560] system 00:03: ioport range 0x290-0x29f has been reserved
[    0.216563] system 00:03: ioport range 0x800-0x805 has been reserved
[    0.220544] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.220547] pci 0000:00:01.0:  IO window: disabled
[    0.220552] pci 0000:00:01.0:  MEM window: 0xe6000000-0xe7ffffff
[    0.220556] pci 0000:00:01.0:  PREFETCH window: 0xe4000000-0xe5ffffff
[    0.220572] pci 0000:00:01.0: setting latency timer to 64
[    0.220578] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.220580] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.220583] pci_bus 0000:01: resource 1 mem: [0xe6000000-0xe7ffffff]
[    0.220586] pci_bus 0000:01: resource 2 pref mem [0xe4000000-0xe5ffffff]
[    0.220634] NET: Registered protocol family 2
[    0.220762] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.221434] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[    0.223822] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.224982] TCP: Hash tables configured (established 131072 bind 65536)
[    0.224986] TCP reno registered
[    0.225119] NET: Registered protocol family 1
[    0.225150] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.225250] pci 0000:01:00.0: Boot video device
[    0.225403] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
[    0.228888] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[    0.229084] Scanning for low memory corruption every 60 seconds
[    0.229231] audit: initializing netlink socket (disabled)
[    0.229246] type=2000 audit(1279284811.219:1): initialized
[    0.238814] Trying to unpack rootfs image as initramfs...
[    0.249761] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.259602] VFS: Disk quotas dquot_6.5.2
[    0.259726] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.260471] fuse init (API version 7.13)
[    0.260556] msgmni has been set to 1982
[    0.260810] alg: No test for stdrng (krng)
[    0.260870] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.260874] io scheduler noop registered
[    0.260876] io scheduler anticipatory registered
[    0.260878] io scheduler deadline registered
[    0.260917] io scheduler cfq registered (default)
[    0.261086] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.261109] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.261214] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.261219] ACPI: Power Button [PWRB]
[    0.261272] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.261275] ACPI: Power Button [PWRF]
[    0.261593] processor LNXCPU:00: registered as cooling_device0
[    0.269904] Linux agpgart interface v0.103
[    0.269953] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.270065] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.270161] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.270438] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.270554] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.271585] brd: module loaded
[    0.272062] loop: module loaded
[    0.272161] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.272793] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[    0.272796] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[    0.272801]  alloc irq_desc for 20 on node 0
[    0.272804]  alloc kstat_irqs on node 0
[    0.272814] pata_acpi 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[    0.272893] pata_acpi 0000:00:0f.1: PCI INT A disabled
[    0.279807] Fixed MDIO Bus: probed
[    0.279842] PPP generic driver version 2.4.2
[    0.279922] tun: Universal TUN/TAP device driver, 1.6
[    0.279924] tun: (C) 1999-2004 Max Krasnyansky
[    0.280030] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.280450] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[    0.280453] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[    0.280459]  alloc irq_desc for 21 on node 0
[    0.280461]  alloc kstat_irqs on node 0
[    0.280471] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.280494] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    0.280531] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[    0.280613] ehci_hcd 0000:00:10.4: irq 21, io mem 0xe8010000
[    0.299622] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    0.299803] usb usb1: configuration #1 chosen from 1 choice
[    0.299836] hub 1-0:1.0: USB hub found
[    0.299850] hub 1-0:1.0: 8 ports detected
[    0.299964] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.299984] uhci_hcd: USB Universal Host Controller Interface driver
[    0.309426] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.309443] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    0.309546] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    0.309577] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b000
[    0.309729] usb usb2: configuration #1 chosen from 1 choice
[    0.309763] hub 2-0:1.0: USB hub found
[    0.309774] hub 2-0:1.0: 2 ports detected
[    0.309928] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.309936] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    0.309975] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    0.309998] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b400
[    0.310108] usb usb3: configuration #1 chosen from 1 choice
[    0.310134] hub 3-0:1.0: USB hub found
[    0.310143] hub 3-0:1.0: 2 ports detected
[    0.310217] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.310224] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    0.310271] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    0.310291] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b800
[    0.310396] usb usb4: configuration #1 chosen from 1 choice
[    0.310429] hub 4-0:1.0: USB hub found
[    0.310437] hub 4-0:1.0: 2 ports detected
[    0.310512] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.310519] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    0.310552] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    0.310573] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000bc00
[    0.310692] usb usb5: configuration #1 chosen from 1 choice
[    0.310723] hub 5-0:1.0: USB hub found
[    0.310731] hub 5-0:1.0: 2 ports detected
[    0.310832] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.310834] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.311005] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.311089] mice: PS/2 mouse device common for all mice
[    0.311188] rtc_cmos 00:05: RTC can wake from S4
[    0.311236] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.311282] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    0.311459] device-mapper: uevent: version 1.0.3
[    0.311630] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.314442] device-mapper: multipath: version 1.1.0 loaded
[    0.314448] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.319352] cpuidle: using governor ladder
[    0.319357] cpuidle: using governor menu
[    0.319819] TCP cubic registered
[    0.319965] NET: Registered protocol family 10
[    0.320471] lo: Disabled Privacy Extensions
[    0.320772] NET: Registered protocol family 17
[    0.320814] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores) (version 2.20.00)
[    0.320874] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x2
[    0.320876] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x6
[    0.320879] powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
[    0.321026] PM: Resume from disk failed.
[    0.321042] registered taskstats version 1
[    0.321339]  Magic number: 2:818:885
[    0.321434] rtc_cmos 00:05: setting system clock to 2010-07-16 12:53:32 UTC (1279284812)
[    0.321437] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.321439] EDD information not available.
[    0.330608] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.476169] Freeing initrd memory: 8141k freed
[    0.484999] Freeing unused kernel memory: 880k freed
[    0.485942] Write protecting the kernel read-only data: 7692k
[    0.512395] udev: starting version 151
[    0.728651] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    0.740851] 8139cp 0000:00:13.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    0.743422] FDC 0 is a post-1991 82077
[    0.743470] sata_via 0000:00:0f.0: version 2.4
[    0.743495] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[    0.743547] sata_via 0000:00:0f.0: routed to hard irq line 11
[    0.746250] scsi0 : sata_via
[    0.746988] 8139too Fast Ethernet driver 0.9.28
[    0.747018] scsi1 : sata_via
[    0.747128] ata1: SATA max UDMA/133 cmd 0x9400 ctl 0x9800 bmdma 0xa400 irq 20
[    0.747132] ata2: SATA max UDMA/133 cmd 0x9c00 ctl 0xa000 bmdma 0xa408 irq 20
[    0.747359] pata_via 0000:00:0f.1: version 0.3.4
[    0.747377] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[    0.747561] scsi2 : pata_via
[    0.747677] scsi3 : pata_via
[    0.749578] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xac00 irq 14
[    0.749582] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xac08 irq 15
[    0.749960]  alloc irq_desc for 18 on node 0
[    0.749962]  alloc kstat_irqs on node 0
[    0.749971] 8139too 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.750949] eth0: RealTek RTL8139 at 0xc400, 00:0f:ea:55:08:ea, IRQ 18
[    0.839283] usb 5-1: new low speed USB device using uhci_hcd and address 2
[    0.949288] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    1.011774] usb 5-1: configuration #1 chosen from 1 choice
[    1.170013] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    1.381187] ata4.00: ATA-8: WDC WD1600AAJB-00J3A0, 01.03E01, max UDMA/133
[    1.381191] ata4.00: 312581808 sectors, multi 16: LBA48
[    1.381224] ata4.01: ATAPI: TSSTcorp CDDVDW SH-S222A, SB01, max UDMA/66
[    1.421234] ata4.00: configured for UDMA/133
[    1.460228] ata4.01: configured for UDMA/66
[    1.460660] scsi 3:0:0:0: Direct-Access    ATA      WDC WD1600AAJB-0 01.0 PQ: 0 ANSI: 5
[    1.460852] sd 3:0:0:0: Attached scsi generic sg0 type 0
[    1.461403] sd 3:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.461448] sd 3:0:0:0: [sda] Write Protect is off
[    1.461451] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.461474] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.461608]  sda: sda1 sda2
[    1.507662] sd 3:0:0:0: [sda] Attached SCSI disk
[    1.509970] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.509974] Uniform CD-ROM driver Revision: 3.20
[    1.510191] sr 3:0:1:0: Attached scsi CD-ROM sr0
[    1.510307] sr 3:0:1:0: Attached scsi generic sg1 type 5
[    1.520837] usbcore: registered new interface driver hiddev
[    1.536165] input: USB Optical Mouse as /devices/pci0000:00/0000:00:10.3/usb5/5-1/5-1:1.0/input/input4
[    1.536286] generic-usb 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:10.3-1/input0
[    1.536319] usbcore: registered new interface driver usbhid
[    1.536322] usbhid: v2.6:USB HID core driver
[    1.763378] EXT4-fs (sda1): mounted filesystem with ordered data mode
[  11.646103] udev: starting version 151
[  11.693329] Adding 2805752k swap on /dev/sda5.  Priority:-1 extents:1 across:2805752k
[  11.763001] lp: driver loaded but no devices found
[  11.846285] EDAC MC: Ver: 2.1.0 Jun 11 2010
[  11.948298] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  12.173098] type=1505 audit(1279284824.348:2):  operation="profile_load" pid=498 name="/sbin/dhclient3"
[  12.173390] type=1505 audit(1279284824.348:3):  operation="profile_load" pid=498 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[  12.173556] type=1505 audit(1279284824.348:4):  operation="profile_load" pid=498 name="/usr/lib/connman/scripts/dhclient-script"
[  12.196328] EDAC amd64_edac:  Ver: 3.2.0 Jun 11 2010
[  12.196587] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[  12.217495] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[  12.217505] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[  12.217507]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[  12.217509]  (Note that use of the override may cause unknown side effects.)
[  12.217552] amd64_edac: probe of 0000:00:18.2 failed with error -22
[  12.276600] lp0: using parport0 (interrupt-driven).
[  12.281708] vga16fb: initializing
[  12.281716] vga16fb: mapped to 0xffff8800000a0000
[  12.281915] fb0: VGA16 VGA frame buffer device
[  12.311608] ppdev: user-space parallel port driver
[  12.403194] gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 854kHz
[  12.474502] nvidia: module license 'NVIDIA' taints kernel.
[  12.474509] Disabling lock debugging due to kernel taint
[  12.740843] NVRM: The NVIDIA RIVA TNT2 Model 64/Model 64 Pro GPU installed in this system is
[  12.740846] NVRM:  supported through the NVIDIA Legacy drivers. Please
[  12.740847] NVRM:  visit http://www.nvidia.com/object/unix.html for more
[  12.740849] NVRM:  information.  The 1.0--1606427191 NVIDIA driver will ignore
[  12.740850] NVRM:  this GPU.  Continuing probe...
[  12.740854] NVRM: No NVIDIA graphics adapter found!
[  12.914734] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[  12.914738] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[  12.914744]  alloc irq_desc for 22 on node 0
[  12.914746]  alloc kstat_irqs on node 0
[  12.914756] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
[  12.914921] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[  12.920080] Console: switching to colour frame buffer device 80x30
[  13.131603] type=1505 audit(1279284825.308:5):  operation="profile_load" pid=687 name="/usr/share/gdm/guest-session/Xsession"
[  13.137057] type=1505 audit(1279284825.308:6):  operation="profile_replace" pid=689 name="/sbin/dhclient3"
[  13.137364] type=1505 audit(1279284825.308:7):  operation="profile_replace" pid=689 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[  13.137535] type=1505 audit(1279284825.308:8):  operation="profile_replace" pid=689 name="/usr/lib/connman/scripts/dhclient-script"
[  13.154820] type=1505 audit(1279284825.328:9):  operation="profile_load" pid=690 name="/usr/bin/evince"
[  13.158881] type=1505 audit(1279284825.328:10):  operation="profile_load" pid=690 name="/usr/bin/evince-previewer"
[  13.166244] eth0: link down
[  13.166497] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  13.214932] type=1505 audit(1279284825.388:11):  operation="profile_load" pid=690 name="/usr/bin/evince-thumbnailer"
[  14.071257] [drm] Initialized drm 1.1.0 20060810
[  14.139829]  alloc irq_desc for 16 on node 0
[  14.139834]  alloc kstat_irqs on node 0
[  14.139850] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  14.152078] [drm] nouveau 0000:01:00.0: Detected an NV 0 generation card (0x20154000)
[  14.152175] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[  14.232494] [drm] nouveau 0000:01:00.0: ... appears to be valid
[  14.232766] [drm] nouveau 0000:01:00.0: BMP BIOS found
[  14.232769] [drm] nouveau 0000:01:00.0: BMP version 2.1
[  14.232771] [drm] nouveau 0000:01:00.0: Bios version 02.05.13.00
[  14.232775] [drm] nouveau 0000:01:00.0: Assuming a CRT output exists
[  14.232777] [drm] nouveau 0000:01:00.0: Probing TV encoders on I2C bus: 1
[  14.275747] [drm] nouveau 0000:01:00.0: No TV encoders found.
[  14.286596] [TTM] Zone  kernel: Available graphics memory: 511998 kiB.
[  14.286611] [drm] nouveau 0000:01:00.0: 32 MiB VRAM
[  14.286683] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[  14.286705] agpgart-amd64 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[  14.286711] agpgart-amd64 0000:00:00.0: putting AGP V2 device into 0x mode
[  14.286788] nouveau 0000:01:00.0: putting AGP V2 device into 0x mode
[  14.286791] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[  14.287121] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[  14.287516] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
[  14.287567] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[  14.288935] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[  14.463340] [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x45000, bo ffff880030e67a00
[  14.464175] fb1: nouveaufb frame buffer device
[  14.464178] registered panic notifier
[  14.464187] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[  14.710344] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[  14.710813] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[  14.890207] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[  14.890215] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output @
[  74.790131] Marking TSC unstable due to cpufreq changes
[  74.790220] Switching to clocksource acpi_pm
[  119.980039] usb 1-8: new high speed USB device using ehci_hcd and address 3
[  120.131081] usb 1-8: configuration #1 chosen from 1 choice
[  120.233635] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0007
[  120.233669] usbcore: registered new interface driver usblp
[  121.761675] usb 1-8: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[  153.571748] usb 1-8: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[  166.941742] usb 1-8: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[  306.291806] usb 1-8: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[  508.212972] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  508.213308] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  518.790015] eth0: no IPv6 routers present
[ 2469.391893] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 3231.708425] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 4109.280058] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 4109.431944] usb 1-3: configuration #1 chosen from 1 choice
[ 4109.526720] Initializing USB Mass Storage driver...
[ 4109.528481] scsi4 : SCSI emulation for USB Mass Storage devices
[ 4109.529827] usbcore: registered new interface driver usb-storage
[ 4109.529834] USB Mass Storage support registered.
[ 4109.539679] usb-storage: device found at 4
[ 4109.539685] usb-storage: waiting for device to settle before scanning
[ 4114.530285] usb-storage: device scan complete
[ 4114.531131] scsi 4:0:0:0: Direct-Access    TOSHIBA  MK3252GSX        0A  PQ: 0 ANSI: 2 CCS
[ 4114.535387] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 4114.536855] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4114.537590] sd 4:0:0:0: [sdb] Write Protect is off
[ 4114.537598] sd 4:0:0:0: [sdb] Mode Sense: 00 38 00 00
[ 4114.537607] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4114.539229] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4114.539238]  sdb: sdb1 sdb2
[ 4114.947788] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4114.947805] sd 4:0:0:0: [sdb] Attached SCSI disk
Avatar utente
pieddu
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 13453
Iscrizione: sabato 11 novembre 2006, 21:46
Desktop: Mate XFCE
Distribuzione: Devuan Trisquel
Sesso: Maschile
Località: Serravalle di Chienti (Taverne)

Re: montare un HDD con S:O. diverso

Messaggio da pieddu »

Codice: Seleziona tutto

[ 4109.526720] Initializing USB Mass Storage driver...
[ 4109.528481] scsi4 : SCSI emulation for USB Mass Storage devices
[ 4109.529827] usbcore: registered new interface driver usb-storage
[ 4109.529834] USB Mass Storage support registered.
[ 4109.539679] usb-storage: device found at 4
[ 4109.539685] usb-storage: waiting for device to settle before scanning
[ 4114.530285] usb-storage: device scan complete
[ 4114.531131] scsi 4:0:0:0: Direct-Access     TOSHIBA  MK3252GSX        0A   PQ: 0 ANSI: 2 CCS
[ 4114.535387] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 4114.536855] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4114.537590] sd 4:0:0:0: [sdb] Write Protect is off
[ 4114.537598] sd 4:0:0:0: [sdb] Mode Sense: 00 38 00 00
[ 4114.537607] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4114.539229] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4114.539238]  sdb: sdb1 sdb2
[ 4114.947788] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4114.947805] sd 4:0:0:0: [sdb] Attached SCSI disk
Qui sembra lo riconosca.....
Non lo trovi tra "risorse"?
Dovrebbero comparire 2 nuove partizioni.
:birra:
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 6 ospiti