[Internet] Chiavetta Tim olivetti olicard 145 [HELP]

Riconoscimento, installazione e configurazione delle periferiche.
bosca80
Prode Principiante
Messaggi: 5
Iscrizione: martedì 27 luglio 2010, 14:50

[Internet] Chiavetta Tim olivetti olicard 145 [HELP]

Messaggio da bosca80 »

Salve a tutti, sono alle prime armi con ubuntu e mi sono già imbattuto in un problema per me insormontabile: ho acquistato la chiavetta tim olicard 145 e pur installando USB mode-switch e USB mode-switch data non riesco a far riconoscere al mio SO la chiavettina internet; infatti riesco a visualizzare soltanto lìicona del cd con scritto "chiavetta Tim". Vi prego di aiutarmi anche perchè non ho trovato in rete guide che parlassero di questa particolare internrt key. Grazie
Ultima modifica di bosca80 il martedì 27 luglio 2010, 17:45, modificato 1 volta in totale.
bosca80
Prode Principiante
Messaggi: 5
Iscrizione: martedì 27 luglio 2010, 14:50

Re: [Internet] Chiavetta Tim olivetti olicard 145

Messaggio da bosca80 »

up
bosca80
Prode Principiante
Messaggi: 5
Iscrizione: martedì 27 luglio 2010, 14:50

Re: [Internet] Chiavetta Tim olivetti olicard 145 [HELP]

Messaggio da bosca80 »

nessuno sa darmi una mano, please  :'(
Avatar utente
Pingue_pinguino
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1514
Iscrizione: giovedì 24 novembre 2005, 17:52
Località: Valsusa

Re: [Internet] Chiavetta Tim olivetti olicard 145 [HELP]

Messaggio da Pingue_pinguino »

Ciao,
prova ad avviare il pc con la chiavetta inserita e posta l'esito del comando

Codice: Seleziona tutto

dmesg
Mi raccomando: l'output del comando è molto lungo, mettilo tra i tag code (tasto cancelletto, sopra le faccine tra la macchina da scrivere ed il fumetto).
bosca80
Prode Principiante
Messaggi: 5
Iscrizione: martedì 27 luglio 2010, 14:50

Re: [Internet] Chiavetta Tim olivetti olicard 145 [HELP]

Messaggio da bosca80 »

Grazie mille per la risposta, questo è quello che appare dopo il comando

Codice: Seleziona tutto

[    0.579000] pci 0000:07:06.0: CardBus bridge, secondary bus 0000:08
[    0.579002] pci 0000:07:06.0:   IO window: 0x004400-0x0044ff
[    0.579008] pci 0000:07:06.0:   IO window: 0x004800-0x0048ff
[    0.579015] pci 0000:07:06.0:   PREFETCH window: 0x40000000-0x43ffffff
[    0.579022] pci 0000:07:06.0:   MEM window: 0x48000000-0x4bffffff
[    0.579028] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
[    0.579032] pci 0000:00:1e.0:   IO window: 0x4000-0x4fff
[    0.579040] pci 0000:00:1e.0:   MEM window: 0xdc000000-0xdc0fffff
[    0.579047] pci 0000:00:1e.0:   PREFETCH window: 0x40000000-0x43ffffff
[    0.579070]   alloc irq_desc for 17 on node -1
[    0.579072]   alloc kstat_irqs on node -1
[    0.579079] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.579087] pci 0000:00:1c.0: setting latency timer to 64
[    0.579099]   alloc irq_desc for 16 on node -1
[    0.579101]   alloc kstat_irqs on node -1
[    0.579106] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.579112] pci 0000:00:1c.1: setting latency timer to 64
[    0.579125]   alloc irq_desc for 18 on node -1
[    0.579127]   alloc kstat_irqs on node -1
[    0.579132] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.579138] pci 0000:00:1c.2: setting latency timer to 64
[    0.579149] pci 0000:00:1e.0: setting latency timer to 64
[    0.579162] pci 0000:07:06.0: enabling device (0000 -> 0003)
[    0.579168] pci 0000:07:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.579178] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.579181] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.579185] pci_bus 0000:02: resource 0 io:  [0x5000-0x5fff]
[    0.579188] pci_bus 0000:02: resource 1 mem: [0x44000000-0x441fffff]
[    0.579191] pci_bus 0000:02: resource 2 pref mem [0x44200000-0x443fffff]
[    0.579195] pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
[    0.579198] pci_bus 0000:03: resource 1 mem: [0xd8000000-0xd9ffffff]
[    0.579201] pci_bus 0000:03: resource 2 pref mem [0xd2000000-0xd3ffffff]
[    0.579204] pci_bus 0000:05: resource 0 io:  [0x3000-0x3fff]
[    0.579207] pci_bus 0000:05: resource 1 mem: [0xda000000-0xdbffffff]
[    0.579210] pci_bus 0000:05: resource 2 pref mem [0xd4000000-0xd5ffffff]
[    0.579214] pci_bus 0000:07: resource 0 io:  [0x4000-0x4fff]
[    0.579217] pci_bus 0000:07: resource 1 mem: [0xdc000000-0xdc0fffff]
[    0.579220] pci_bus 0000:07: resource 2 pref mem [0x40000000-0x43ffffff]
[    0.579223] pci_bus 0000:07: resource 3 io:  [0x00-0xffff]
[    0.579226] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffff]
[    0.579229] pci_bus 0000:08: resource 0 io:  [0x4400-0x44ff]
[    0.579232] pci_bus 0000:08: resource 1 io:  [0x4800-0x48ff]
[    0.579235] pci_bus 0000:08: resource 2 pref mem [0x40000000-0x43ffffff]
[    0.579238] pci_bus 0000:08: resource 3 mem: [0x48000000-0x4bffffff]
[    0.579280] NET: Registered protocol family 2
[    0.579398] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.579843] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.580493] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.580758] TCP: Hash tables configured (established 131072 bind 65536)
[    0.580761] TCP reno registered
[    0.580855] NET: Registered protocol family 1
[    0.580879] pci 0000:00:02.0: Boot video device
[    0.581012] pci 0000:07:08.0: Firmware left e100 interrupts enabled; disabling
[    0.581047] Simple Boot Flag at 0x36 set to 0x1
[    0.581267] cpufreq-nforce2: No nForce2 chipset.
[    0.581302] Scanning for low memory corruption every 60 seconds
[    0.581443] audit: initializing netlink socket (disabled)
[    0.581457] type=2000 audit(1280256308.579:1): initialized
[    0.594030] highmem bounce pool size: 64 pages
[    0.594036] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.596060] VFS: Disk quotas dquot_6.5.2
[    0.596142] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.596889] fuse init (API version 7.13)
[    0.597002] msgmni has been set to 1731
[    0.597302] alg: No test for stdrng (krng)
[    0.597374] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.597379] io scheduler noop registered
[    0.597381] io scheduler anticipatory registered
[    0.597384] io scheduler deadline registered
[    0.597433] io scheduler cfq registered (default)
[    0.597640]   alloc irq_desc for 24 on node -1
[    0.597643]   alloc kstat_irqs on node -1
[    0.597658] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.597672] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.597863]   alloc irq_desc for 25 on node -1
[    0.597865]   alloc kstat_irqs on node -1
[    0.597876] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.597889] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.598078]   alloc irq_desc for 26 on node -1
[    0.598081]   alloc kstat_irqs on node -1
[    0.598091] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[    0.598104] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.598238] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.598384] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.598725] ACPI: AC Adapter [ADP0] (on-line)
[    0.598850] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.598902] ACPI: Lid Switch [LID]
[    0.598959] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.598962] ACPI: Power Button [PWRB]
[    0.599041] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.599044] ACPI: Power Button [PWRF]
[    0.599200] fan PNP0C0B:00: registered as cooling_device0
[    0.599211] ACPI: Fan [FAN0] (off)
[    0.599989] ACPI: SSDT 3f67e95e 001EA (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.600486] ACPI: SSDT 3f67e6fd 001DC (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.600942] Marking TSC unstable due to TSC halts in idle
[    0.601009] Switching to clocksource hpet
[    0.601045] processor LNXCPU:00: registered as cooling_device1
[    0.601546] ACPI: SSDT 3f67eb48 00089 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.601979] ACPI: SSDT 3f67e8d9 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.602539] processor LNXCPU:01: registered as cooling_device2
[    0.676529] thermal LNXTHERM:01: registered as thermal_zone0
[    0.676540] ACPI: Thermal Zone [TZ00] (54 C)
[    0.684940] thermal LNXTHERM:02: registered as thermal_zone1
[    0.684953] ACPI: Thermal Zone [TZ01] (55 C)
[    0.685155] isapnp: Scanning for PnP cards...
[    0.687020] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.688797] brd: module loaded
[    0.689403] loop: module loaded
[    0.689506] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    0.689613] ata_piix 0000:00:1f.2: version 2.13
[    0.689634]   alloc irq_desc for 19 on node -1
[    0.689636]   alloc kstat_irqs on node -1
[    0.689643] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.689651] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    0.692973] ACPI: Battery Slot [BAT0] (battery present)
[    0.844027] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.844120] scsi0 : ata_piix
[    0.844214] scsi1 : ata_piix
[    0.845423] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[    0.845429] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[    0.845871] Fixed MDIO Bus: probed
[    0.845918] PPP generic driver version 2.4.2
[    0.845966] tun: Universal TUN/TAP device driver, 1.6
[    0.845968] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.846070] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.846095]   alloc irq_desc for 23 on node -1
[    0.846097]   alloc kstat_irqs on node -1
[    0.846103] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.846116] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.846121] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.846160] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.846184] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.846198] ehci_hcd 0000:00:1d.7: debug port 1
[    0.850099] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.850220] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdc444000
[    0.864020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.864143] usb usb1: configuration #1 chosen from 1 choice
[    0.864179] hub 1-0:1.0: USB hub found
[    0.864191] hub 1-0:1.0: 8 ports detected
[    0.864279] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.864298] uhci_hcd: USB Universal Host Controller Interface driver
[    0.864328] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.864336] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.864340] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.864381] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.864411] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    0.864519] usb usb2: configuration #1 chosen from 1 choice
[    0.864551] hub 2-0:1.0: USB hub found
[    0.864559] hub 2-0:1.0: 2 ports detected
[    0.864620] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.864628] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.864633] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.864673] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.864713] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    0.864825] usb usb3: configuration #1 chosen from 1 choice
[    0.864857] hub 3-0:1.0: USB hub found
[    0.864865] hub 3-0:1.0: 2 ports detected
[    0.864924] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.864932] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.864936] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.864978] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.865019] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    0.865130] usb usb4: configuration #1 chosen from 1 choice
[    0.865169] hub 4-0:1.0: USB hub found
[    0.865177] hub 4-0:1.0: 2 ports detected
[    0.865235] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.865243] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.865247] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.865284] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.865325] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    0.865432] usb usb5: configuration #1 chosen from 1 choice
[    0.865467] hub 5-0:1.0: USB hub found
[    0.865475] hub 5-0:1.0: 2 ports detected
[    0.865597] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.868301] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.869999] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.870010] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.870014] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.870017] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.870021] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.870113] mice: PS/2 mouse device common for all mice
[    0.870267] rtc_cmos 00:07: RTC can wake from S4
[    0.870312] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.870347] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.870468] device-mapper: uevent: version 1.0.3
[    0.870577] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.870654] device-mapper: multipath: version 1.1.0 loaded
[    0.870659] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.870799] EISA: Probing bus 0 at eisa.0
[    0.870806] Cannot allocate resource for EISA slot 1
[    0.870809] Cannot allocate resource for EISA slot 2
[    0.870812] Cannot allocate resource for EISA slot 3
[    0.870814] Cannot allocate resource for EISA slot 4
[    0.870817] Cannot allocate resource for EISA slot 5
[    0.870832] EISA: Detected 0 cards.
[    0.870995] cpuidle: using governor ladder
[    0.871114] cpuidle: using governor menu
[    0.871684] TCP cubic registered
[    0.871877] NET: Registered protocol family 10
[    0.872499] lo: Disabled Privacy Extensions
[    0.872947] NET: Registered protocol family 17
[    0.873303] Using IPI No-Shortcut mode
[    0.873401] PM: Resume from disk failed.
[    0.873415] registered taskstats version 1
[    0.874009]   Magic number: 2:182:798
[    0.874099] rtc_cmos 00:07: setting system clock to 2010-07-27 18:45:09 UTC (1280256309)
[    0.874103] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.874105] EDD information not available.
[    0.908214] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.016962] ata2.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.60, max UDMA/33
[    1.017132] ata1.00: ATA-7: FUJITSU MHV2100BH PL, 0000002A, max UDMA/100
[    1.017137] ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.036879] ata2.00: configured for UDMA/33
[    1.037005] ata1.00: configured for UDMA/100
[    1.039111] isapnp: No Plug & Play device found
[    1.039267] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2100B 0000 PQ: 0 ANSI: 5
[    1.039428] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.039632] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB)
[    1.039694] sd 0:0:0:0: [sda] Write Protect is off
[    1.039698] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.039729] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.039902]  sda:
[    1.041447] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-841S  1.60 PQ: 0 ANSI: 5
[    1.046230] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.046238] Uniform CD-ROM driver Revision: 3.20
[    1.046434] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.046508] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.063482]  sda1 sda2 < sda5 >
[    1.094123] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.094148] Freeing unused kernel memory: 660k freed
[    1.094653] Write protecting the kernel text: 4680k
[    1.094716] Write protecting the kernel read-only data: 1840k
[    1.116517] udev: starting version 151
[    1.204079] usb 1-4: new high speed USB device using ehci_hcd and address 2
[    1.296477] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    1.296481] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.296538]   alloc irq_desc for 20 on node -1
[    1.296541]   alloc kstat_irqs on node -1
[    1.296549] e100 0000:07:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.324336] e100 0000:07:08.0: PME# disabled
[    1.325211] e100: eth0: e100_probe: addr 0xdc005000, irq 20, MAC addr 00:a0:d1:5c:a6:be
[    1.325258] ohci1394 0000:07:06.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.339196] usb 1-4: configuration #1 chosen from 1 choice
[    1.348753] Initializing USB Mass Storage driver...
[    1.349096] scsi2 : SCSI emulation for USB Mass Storage devices
[    1.349212] usbcore: registered new interface driver usb-storage
[    1.349215] USB Mass Storage support registered.
[    1.349426] usb-storage: device found at 2
[    1.349428] usb-storage: waiting for device to settle before scanning
[    1.380104] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[dc006000-dc0067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    1.518083] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    3.346840] Adding 2975736k swap on /dev/sda5.  Priority:-1 extents:1 across:2975736k 
[    3.793781] udev: starting version 151
[    4.761363] type=1505 audit(1280249113.385:2):  operation="profile_load" pid=507 name="/sbin/dhclient3"
[    4.762353] type=1505 audit(1280249113.385:3):  operation="profile_load" pid=507 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[    4.762816] type=1505 audit(1280249113.385:4):  operation="profile_load" pid=507 name="/usr/lib/connman/scripts/dhclient-script"
[    5.032163] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[    5.033617] acpi device:07: registered as cooling_device3
[    5.034394] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5
[    5.034532] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.454537] intel_rng: FWH not detected
[    5.470880] Linux agpgart interface v0.103
[    5.484564] lp: driver loaded but no devices found
[    5.659821] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
[    5.692564] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[    5.864801] yenta_cardbus 0000:07:06.0: CardBus bridge found [1179:ff10]
[    5.864830] yenta_cardbus 0000:07:06.0: Enabling burst memory read transactions
[    5.864837] yenta_cardbus 0000:07:06.0: Using CSCINT to route CSC interrupts to PCI
[    5.864842] yenta_cardbus 0000:07:06.0: Routing CardBus interrupts to PCI
[    5.864849] yenta_cardbus 0000:07:06.0: TI: mfunc 0x01a01b22, devctl 0x66
[    6.092834] yenta_cardbus 0000:07:06.0: ISA IRQ mask 0x0cf8, PCI irq 18
[    6.092841] yenta_cardbus 0000:07:06.0: Socket status: 30000006
[    6.092847] pci_bus 0000:07: Raising subordinate bus# of parent bus (#07) from #07 to #0b
[    6.092858] yenta_cardbus 0000:07:06.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[    6.092863] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff: clean.
[    6.093149] yenta_cardbus 0000:07:06.0: pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff
[    6.093153] yenta_cardbus 0000:07:06.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
[    6.348766] usb-storage: device scan complete
[    6.349609] scsi 2:0:0:0: Direct-Access     USBModem MMC Storage      2.31 PQ: 0 ANSI: 2
[    6.350225] scsi 2:0:0:1: CD-ROM            USBModem MMC Storage      2.31 PQ: 0 ANSI: 2
[    6.352565] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    6.355665] sr1: scsi-1 drive
[    6.355830] sr 2:0:0:1: Attached scsi CD-ROM sr1
[    6.355921] sr 2:0:0:1: Attached scsi generic sg3 type 5
[    6.372154] cfg80211: Calling CRDA to update world regulatory domain
[    6.375400] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    6.693152] [drm] Initialized drm 1.1.0 20060810
[    6.699980] sdhci: Secure Digital Host Controller Interface driver
[    6.699984] sdhci: Copyright(c) Pierre Ossman
[    6.700256] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    6.700931] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[    6.704644] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    6.802842] tifm_7xx1 0000:07:06.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    6.815008] sdhci-pci 0000:07:06.3: SDHCI controller found [104c:803c] (rev 0)
[    6.815031] sdhci-pci 0000:07:06.3: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    6.815242] Registered led device: mmc0::
[    6.815359] mmc0: SDHCI controller on PCI [0000:07:06.3] using DMA
[    7.260079] cfg80211: World regulatory domain updated:
[    7.260083] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    7.260087] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.260090] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    7.260094] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    7.260097] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.260101] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.330396] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.330404] i915 0000:00:02.0: setting latency timer to 64
[    7.335533] [drm] set up 7M of stolen space
[    7.438454] [drm] initialized overlay support
[    7.560392] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[    7.560397] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[    7.560527] iwl3945 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    7.560544] iwl3945 0000:05:00.0: setting latency timer to 64
[    7.632878] iwl3945 0000:05:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[    7.632881] iwl3945 0000:05:00.0: Detected Intel Wireless WiFi Link 3945ABG
[    7.633010]   alloc irq_desc for 27 on node -1
[    7.633013]   alloc kstat_irqs on node -1
[    7.633051] iwl3945 0000:05:00.0: irq 27 for MSI/MSI-X
[    7.746776] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[    7.748898] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[    7.749732] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[    7.750442] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[    7.751361] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[    7.999602] fb0: inteldrmfb frame buffer device
[    7.999606] registered panic notifier
[    7.999618] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    8.139863] phy0: Selected rate control algorithm 'iwl-3945-rs'
[    8.189693] vga16fb: initializing
[    8.189698] vga16fb: mapped to 0xc00a0000
[    8.189702] vga16fb: not registering due to another framebuffer present
[    8.957175] Console: switching to colour frame buffer device 160x50
[   10.405794]   alloc irq_desc for 22 on node -1
[   10.405798]   alloc kstat_irqs on node -1
[   10.405808] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.406085] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.926438] hda_codec: ALC861: BIOS auto-probing.
[   10.927494] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[   12.356069] type=1505 audit(1280249120.981:5):  operation="profile_load" pid=847 name="/usr/share/gdm/guest-session/Xsession"
[   12.358657] type=1505 audit(1280249120.981:6):  operation="profile_replace" pid=848 name="/sbin/dhclient3"
[   12.359533] type=1505 audit(1280249120.981:7):  operation="profile_replace" pid=848 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   12.360038] type=1505 audit(1280249120.985:8):  operation="profile_replace" pid=848 name="/usr/lib/connman/scripts/dhclient-script"
[   12.560873] type=1505 audit(1280249121.185:9):  operation="profile_load" pid=849 name="/usr/bin/evince"
[   12.572096] type=1505 audit(1280249121.194:10):  operation="profile_load" pid=849 name="/usr/bin/evince-previewer"
[   12.579027] type=1505 audit(1280249121.202:11):  operation="profile_load" pid=849 name="/usr/bin/evince-thumbnailer"
[   12.651418] type=1505 audit(1280249121.276:12):  operation="profile_load" pid=851 name="/usr/lib/cups/backend/cups-pdf"
[   12.652447] type=1505 audit(1280249121.277:13):  operation="profile_load" pid=851 name="/usr/sbin/cupsd"
[   12.694578] type=1505 audit(1280249121.317:14):  operation="profile_load" pid=852 name="/usr/sbin/tcpdump"
[   12.819035] iwl3945 0000:05:00.0: firmware: requesting iwlwifi-3945-2.ucode
[   13.088197] iwl3945 0000:05:00.0: loaded firmware version 15.32.2.9
[   13.157209] Registered led device: iwl-phy0::radio
[   13.157627] Registered led device: iwl-phy0::assoc
[   13.158028] Registered led device: iwl-phy0::RX
[   13.158424] Registered led device: iwl-phy0::TX
[   13.178022] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.223120] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.707493] ppdev: user-space parallel port driver
[   56.665645] wlan0: deauthenticating from 00:1d:19:c9:b2:5b by local choice (reason=3)
[   56.668575] wlan0: direct probe to AP 00:1d:19:c9:b2:5b (try 1)
[   56.673475] wlan0: direct probe responded
[   56.673485] wlan0: authenticate with AP 00:1d:19:c9:b2:5b (try 1)
[   56.675741] wlan0: authenticated
[   56.675782] wlan0: associate with AP 00:1d:19:c9:b2:5b (try 1)
[   56.678516] wlan0: RX AssocResp from 00:1d:19:c9:b2:5b (capab=0x431 status=0 aid=1)
[   56.678522] wlan0: associated
[   56.682982] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   56.683050] cfg80211: Calling CRDA for country: US
[   56.686389] cfg80211: Received country IE:
[   56.686393] cfg80211: Regulatory domain: US
[   56.686396] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   56.686399] 	(2402000 KHz - 2477000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm)
[   56.686402] cfg80211: CRDA thinks this should applied:
[   56.686404] cfg80211: Regulatory domain: US
[   56.686406] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   56.686409] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   56.686413] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   56.686416] 	(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   56.686419] 	(5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   56.686422] 	(5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   56.686425] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   56.686427] cfg80211: We intersect both of these and get:
[   56.686429] cfg80211: Regulatory domain: 98
[   56.686431] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   56.686434] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   56.686441] cfg80211: Disabling channel 2467 MHz on phy0 due to Country IE
[   56.686443] cfg80211: Disabling channel 2472 MHz on phy0 due to Country IE
[   56.686446] cfg80211: Leaving channel 5170 MHz intact on phy0 - no rule found in band on Country IE
[   56.686449] cfg80211: Leaving channel 5180 MHz intact on phy0 - no rule found in band on Country IE
[   56.686452] cfg80211: Leaving channel 5190 MHz intact on phy0 - no rule found in band on Country IE
[   56.686455] cfg80211: Leaving channel 5200 MHz intact on phy0 - no rule found in band on Country IE
[   56.686458] cfg80211: Leaving channel 5210 MHz intact on phy0 - no rule found in band on Country IE
[   56.686460] cfg80211: Leaving channel 5220 MHz intact on phy0 - no rule found in band on Country IE
[   56.686463] cfg80211: Leaving channel 5230 MHz intact on phy0 - no rule found in band on Country IE
[   56.686466] cfg80211: Leaving channel 5240 MHz intact on phy0 - no rule found in band on Country IE
[   56.686469] cfg80211: Leaving channel 5260 MHz intact on phy0 - no rule found in band on Country IE
[   56.686472] cfg80211: Leaving channel 5280 MHz intact on phy0 - no rule found in band on Country IE
[   56.686474] cfg80211: Leaving channel 5300 MHz intact on phy0 - no rule found in band on Country IE
[   56.686477] cfg80211: Leaving channel 5320 MHz intact on phy0 - no rule found in band on Country IE
[   56.686480] cfg80211: Leaving channel 5500 MHz intact on phy0 - no rule found in band on Country IE
[   56.686483] cfg80211: Leaving channel 5520 MHz intact on phy0 - no rule found in band on Country IE
[   56.686486] cfg80211: Leaving channel 5540 MHz intact on phy0 - no rule found in band on Country IE
[   56.686489] cfg80211: Leaving channel 5560 MHz intact on phy0 - no rule found in band on Country IE
[   56.686492] cfg80211: Leaving channel 5580 MHz intact on phy0 - no rule found in band on Country IE
[   56.686495] cfg80211: Leaving channel 5600 MHz intact on phy0 - no rule found in band on Country IE
[   56.686497] cfg80211: Leaving channel 5620 MHz intact on phy0 - no rule found in band on Country IE
[   56.686500] cfg80211: Leaving channel 5640 MHz intact on phy0 - no rule found in band on Country IE
[   56.686503] cfg80211: Leaving channel 5660 MHz intact on phy0 - no rule found in band on Country IE
[   56.686506] cfg80211: Leaving channel 5680 MHz intact on phy0 - no rule found in band on Country IE
[   56.686509] cfg80211: Leaving channel 5700 MHz intact on phy0 - no rule found in band on Country IE
[   56.686513] cfg80211: Current regulatory domain updated by AP to: US
[   56.686515] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   56.686518] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   57.299452] padlock: VIA PadLock not detected.
[   59.208441] ISO 9660 Extensions: Microsoft Joliet Level 3
[   59.292673] ISOFS: changing to secondary root
[   66.740078] wlan0: no IPv6 routers present
bosca80@bosca80-laptop:~$ 
bosca80
Prode Principiante
Messaggi: 5
Iscrizione: martedì 27 luglio 2010, 14:50

Re: [Internet] Chiavetta Tim olivetti olicard 145 [HELP]

Messaggio da bosca80 »

Nessun consiglio?
Avatar utente
Pingue_pinguino
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1514
Iscrizione: giovedì 24 novembre 2005, 17:52
Località: Valsusa

Re: [Internet] Chiavetta Tim olivetti olicard 145 [HELP]

Messaggio da Pingue_pinguino »

Sembra non ci sia traccia della chiavetta.

Prova ad accendere il pc, infilare la chiavetta e poi postare l'esito del solito

Codice: Seleziona tutto

dmesg
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: leoleonardo e 8 ospiti