come applicare la password a un ruter wireless

Riconoscimento, installazione e configurazione delle periferiche.
Avatar utente
alex58
Prode Principiante
Messaggi: 16
Iscrizione: lunedì 13 aprile 2009, 17:12
Località: grottagli

Re: come applicare la password a un ruter wireless

Messaggio da alex58 »

alessandro@alessandro:~$ telnet 192.168.1.254
Trying 192.168.1.254...
Connected to 192.168.1.254.
Escape character is '^]'.
Connection closed by foreign host.
alessandro@alessandro:~$
Avatar utente
Massimog
Rampante Reduce
Rampante Reduce
Messaggi: 7342
Iscrizione: martedì 2 dicembre 2008, 18:17
Desktop: GNOME 3.16
Distribuzione: Gentoo x86_64
Sesso: Maschile
Località: Osimo(AN)

Re: come applicare la password a un ruter wireless

Messaggio da Massimog »

riavvia il router e riprova da firefox
Acer 5920G con Gentoo 64bit + Ubuntu 12.04 LTS Precise Pangolin 64bit + Windows 7 64 bit | Stampante Epson PX710W | Router Netgear DGN2000
Avatar utente
alex58
Prode Principiante
Messaggi: 16
Iscrizione: lunedì 13 aprile 2009, 17:12
Località: grottagli

Re: come applicare la password a un ruter wireless

Messaggio da alex58 »

alessandro@alessandro:~$ telnet 192.168.1.254
Trying 192.168.1.254...
Connected to 192.168.1.254.
Escape character is '^]'.
Connection closed by foreign host.
alessandro@alessandro:~$
Avatar utente
Massimog
Rampante Reduce
Rampante Reduce
Messaggi: 7342
Iscrizione: martedì 2 dicembre 2008, 18:17
Desktop: GNOME 3.16
Distribuzione: Gentoo x86_64
Sesso: Maschile
Località: Osimo(AN)

Re: come applicare la password a un ruter wireless

Messaggio da Massimog »

postami un altra volta

Codice: Seleziona tutto

ifconfig
poi mi arrendo :(
Acer 5920G con Gentoo 64bit + Ubuntu 12.04 LTS Precise Pangolin 64bit + Windows 7 64 bit | Stampante Epson PX710W | Router Netgear DGN2000
Avatar utente
alex58
Prode Principiante
Messaggi: 16
Iscrizione: lunedì 13 aprile 2009, 17:12
Località: grottagli

Re: come applicare la password a un ruter wireless

Messaggio da alex58 »

alessandro@alessandro:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:18:f3:a1:ca:b2 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisioni:0 txqueuelen:1000
          Byte RX:0 (0.0 B)  Byte TX:0 (0.0 B)
          Interrupt:18 Indirizzo base:0xd800

lo        Link encap:Loopback locale 
          indirizzo inet:127.0.0.1  Maschera:255.0.0.0
          indirizzo inet6: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:168 errors:0 dropped:0 overruns:0 frame:0
          TX packets:168 errors:0 dropped:0 overruns:0 carrier:0
          collisioni:0 txqueuelen:0
          Byte RX:12608 (12.6 KB)  Byte TX:12608 (12.6 KB)

wlan0    Link encap:Ethernet  HWaddr 00:18:de:30:d0:cc 
          indirizzo inet:192.168.1.100  Bcast:192.168.1.255  Maschera:255.255.255.0
          indirizzo inet6: fe80::218:deff:fe30:d0cc/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:8161 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7219 errors:0 dropped:0 overruns:0 carrier:0
          collisioni:0 txqueuelen:1000
          Byte RX:8412332 (8.4 MB)  Byte TX:1339310 (1.3 MB)

alessandro@alessandro:~$
grazie in ogni caso! 
Avatar utente
Massimog
Rampante Reduce
Rampante Reduce
Messaggi: 7342
Iscrizione: martedì 2 dicembre 2008, 18:17
Desktop: GNOME 3.16
Distribuzione: Gentoo x86_64
Sesso: Maschile
Località: Osimo(AN)

Re: come applicare la password a un ruter wireless

Messaggio da Massimog »

adesso ti da che sei collegato solo con il wireless, se non ti chiede nome utente e password mettendo 192.168.1.254 su firefox non so piu cosa dirti  :(
Acer 5920G con Gentoo 64bit + Ubuntu 12.04 LTS Precise Pangolin 64bit + Windows 7 64 bit | Stampante Epson PX710W | Router Netgear DGN2000
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 15 ospiti