Scanner con Multifunzione EPSON Stylus SX115

Riconoscimento, installazione e configurazione delle periferiche.
Avatar utente
kekko_94
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 815
Iscrizione: giovedì 11 giugno 2009, 15:01
Desktop: gnome-shell
Distribuzione: Ubuntu 11.10 x86_64
Località: Padova - Italy

Scanner con Multifunzione EPSON Stylus SX115

Messaggio da kekko_94 »

Sto bestemmiando come un turco da mezz'ora. Ho le palle che girano col turbo.  >:(

Mio papà ha comprato "dimenticandosi" di avvisarmi EPSON Stylus SX115.

La stampa va (anche se non si vedono i livelli di inchiostro, ma vabbè...) ma lo scanner no  >:(

Ho installato il pacchetto per la stampante trovato in questa discussione: qui

Ma il pacchetto non ha funzionato. (funziona la stampa ma non lo scanner)

Allora nel wiki ho cercato (anche se la stampante non era nell'elenco) e ho trovato questa cosa qui:

Codice: Seleziona tutto

francesco@francesco-laptop:~$ sudo sane-find-scanner
[sudo] password for francesco: 

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04b8 [SEIKO EPSON], product=0x084d [USB MFP]) at libusb:002:003
found USB scanner (vendor=0x19d2 [ONDA,Incorporated], product=0x0037 [ONDA CDMA Technologies MSM]) at libusb:001:003
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
Visto che ONDA è la mia chiavetta internet e che l'altrto si chiama EPSON presumo che sia il primo, con vendor e product 0x19d2 0x0037.

Bene. Poi ho fatto

Codice: Seleziona tutto

sudo gedit /etc/sane.d/epson.conf
e ho modificato così:

Codice: Seleziona tutto

sudo cat /etc/sane.d/epson.conf 
# epson.conf
#
# here are some examples for how to configure the EPSON backend
#
# SCSI scanner:
scsi EPSON
# for the GT-6500:
scsi "EPSON SC"
#
# Parallel port scanner:
#pio 0x278
#pio 0x378
#pio 0x3BC
#
# USB scanner:
# There are two different methods of configuring a USB scanner: libusb and the kernel module
# For any system with libusb support (which is pretty much any recent Linux distribution) the
# following line is sufficient. This however assumes that the connected scanner (or to be more
# accurate, it's device ID) is known to the backend. 
usb 0x04b8 0x084d
#
#All'inizio c'era solo "usb" poi io ho aggiunto " 0x04b8 0x084d" che sono i numeri ricavati da "sudo sane-find-scanner"
#
# For libusb support for unknown scanners use the following command
# usb <product ID> <device ID>
# e.g.:
# usb 0x4b8 0x110
# And for the scanner module, use the following configuration:
#usb /dev/usbscanner0
#usb /dev/usb/scanner0
Bene. Poi nel wiki c'è scritto così:
Ora non resta che modificare i permessi dello scanner; a tale scopo è sufficiente aprire con un editor di testo e con i privilegi di amministrazione il file /etc/hotplug/usb/usbscanner.usermap e inserire la seguente riga:

Codice: Seleziona tutto

usbscanner 0x0003 0×04b8 0×082e 0×0000 0×0000 0×00 0×00 0×00 0×00 0×00 0×00 0×00000000
Immagino che il vendor e il product vadano cambiati con i codici che ho, ma il problema è che il file non esiste!!!

Per chi lo chiedesse: ho seguito quella guida solo da dove dice
Installazione dello scanner
perchè la stampante già funziona...

Ora. Esiste un qualcosa che mi faccia andare lo scanner o devo riprendermi la stampante vecchia (canon mp160) che stampa una pagina all'ora??

Grazie a tutti scusate il nervosismo...
AMD Phenom II X6 1100T 3.3GHz, 8GB Ram 1600MHz DDR3, 1,5TB HDD, nVidia GTS450 1GB DDR5
Toshiba Satellite A200 15X Intel Pentium D 1.73GHz 2Gb Ram, 110Gb HDD
OS: Ubuntu 10.10 Maverick Meerkat
Avatar utente
st
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1427
Iscrizione: mercoledì 14 gennaio 2009, 20:19
Località: Pollaio

Re: Scanner con Multifunzione EPSON Stylus SX115

Messaggio da st »

Anch`io ho una stampante Epson Stylus SX 600FW(multifunzione) nuova !
Riguardo la stampa , tutto funziona alla perfezione , compreso acessori vari .
Lo scanner non da cenni di vita ( con linux )
meglio un uovo oggi , o una gallina domani ?
Avatar utente
peppe84
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 2229
Iscrizione: mercoledì 15 marzo 2006, 11:13
Desktop: unity-2d e gnome-fallback
Distribuzione: Ubuntu 12.04 LTS x86_64
Località: La dotta

Re: Scanner con Multifunzione EPSON Stylus SX115

Messaggio da peppe84 »

non ho il tuo hardware... magari questa procedura va bene anche per la tua multifunzione? http://wiki.ubuntu-it.org/Hardware/Stam ... EpsonMulti
meme86
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 263
Iscrizione: martedì 7 novembre 2006, 21:09

Re: Scanner con Multifunzione EPSON Stylus SX115

Messaggio da meme86 »

guarda qua:
http://art.ubuntuforums.org/showthread.php?p=9788836
che rimanda qui:
http://www.avasys.jp/lx-bin2/linux_e/spc/DL1.do

se cerchi in basso trovi i drivers.
io non ho provato perche' non ho fretta,
fammi sapere.
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: nick091 e 7 ospiti