Installazione driver Scanner Benq 5000E

Riconoscimento, installazione e configurazione delle periferiche.
Scrivi risposta
Giuninho
Prode Principiante
Messaggi: 57
Iscrizione: sabato 24 luglio 2010, 1:43

Installazione driver Scanner Benq 5000E

Messaggio da Giuninho »

Ciao a tutti, non riesco proprio a far funzionare questo scanner nonostante sul sito di SANE dica sia supportato... l'errore che mi da quando apro xsane è questo:

Non è possibile aprire il dispositivo 'snapscan:libusb:005:003' : L'argomento non è valido.

La risposta al comando "sudo sane-find-scanner -p" è:

 # sane-find-scanner will now attempt to detect your scanner. If the
 # result is different from what you expected, first make sure your
 # scanner is powered up and properly connected to your computer.

 # No SCSI scanners found. If you expected something different, make sure that
 # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04a5 [Color], product=0x20fc [ FlatbedScanner 22]) at libusb:005:002
 # Your USB scanner was (probably) detected. It may or may not be supported by
 # SANE. Try scanimage -L and read the backend's manpage.

 # No Mustek parallel port scanners found. If you expected something
 # different, make sure the scanner is correctly connected to your computer
 # and you have apropriate access rights.

 # Most Scanners connected to the parallel port or other proprietary ports
 # can't be detected by this program.

la risposta al comando "scanimage -L"

device `snapscan:libusb:005:003' is a Acer FlatbedScanner22 flatbed scanner

Ho letto da qualche parte che devo modificare il file snapscan.conf ma non ho capito bene cosa dovrei fare. Sono un neofita di ubuntu, vi prego aiutatemi voi !!! Ciao e grazie !!
Ultima modifica di Giuninho il mercoledì 25 agosto 2010, 10:02, modificato 1 volta in totale.
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: Bing [Bot] e 10 ospiti