problema driver intel 945GME

[axr]

salve ho installato maverick versione UNE sul mio netbook MSIwind U100 che monta una scheda video
intel 945GME

Codice: Seleziona tutto

spciaxr@axr-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)


Codice: Seleziona tutto

00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
axr@axr-laptop:~$

glxgears mii da un framerate di 150 e le rotelle vanno a scatti.

il file xorg.conf non esiste

come posso fare?

ciao e grazie

[Zoff]

Prova se facendo auto generare xorg.conf migliora qualcosa (anche se il brutto rapporto con le schede intel è risaputo).

Fai questi passi:
1. Ctrl+F1
2. fai login
3. sudo stop gdm
4. sudo X -configure
5. sudo mv xorg.conf.new /etc/X11/xorg.con
6. sudo start gdm

[gdivito]

Prova se facendo auto generare xorg.conf migliora qualcosa (anche se il brutto rapporto con le schede intel è risaputo).

Fai questi passi:
1. Ctrl+F1
2. fai login
3. sudo stop gdm
4. sudo X -configure
5. sudo mv xorg.conf.new /etc/X11/xorg.con
6. sudo start gdm

No zoff non è quello il problema, è quel cesso di mutter. Almeno su Lucid è così.

Controlla se anche in maverick c'è l'opzione per usare il desktop 3D (in pratica compiz) al posto di mutter.

[axr]

nella scheda apetto mi da le opzioni anche per gli effetti solo che non sono selezionabili e difatti compiz non è installato.
le prestazionii fanno schifo anche con l'interfaccia classica, riloggandomi e scegliendo desktop invece che netbook remix

che dovrei fare?
ciaoe e grazie

[gdivito]

loggati con la sessione normale, poi dai:

metacity --replace & disown

vediamo se è effettivamente quello il problema.

Inoltre:

Codice: Seleziona tutto

glxinfo | grep render
glxinfo | grep vendor

copia cosa esce

[axr]

Codice: Seleziona tutto

axr@axr-laptop:~$ metacity --replace & disown
[1] 1809
axr@axr-laptop:~$ glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: Mesa DRI Intel(R) 945GME GEM 20100328 2010Q1 x86/MMX/SSE2
axr@axr-laptop:~$ glxinfo | grep vendor
server glx vendor string: SGI
client glx vendor string: Mesa Project and SGI
OpenGL vendor string: Tungsten Graphics, Inc
axr@axr-laptop:~$


inoltre nel creare il file xorg mi dice che non trova il driver intel kernel setmode (roba del genere)
inoltre

Codice: Seleziona tutto

axr@axr-laptop:~$ cat /var/log/Xorg.0.log | grep WW
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    17.997] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    17.998] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    17.998] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    17.998] (WW) Disabling Mouse0
[    17.998] (WW) Disabling Keyboard0
axr@axr-laptop:~$ cat /var/log/Xorg.0.log | grep EE
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    18.103] (II) Loadi

Codice: Seleziona tutto

[   17.318567] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   17.318740] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   17.318891]   alloc irq_desc for 41 on node -1
[   17.318908]   alloc kstat_irqs on node -1
[   17.318950] HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[   17.319057] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   17.413338] hda_codec: ALC1200: BIOS auto-probing.
[   18.120464] ata1.00: configured for UDMA/100
[   18.120495] ata1: EH complete
[   18.257314] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[   18.257331] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   18.261077] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[   18.261094] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   18.277021] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[   18.277040] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   18.280286] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[   18.280308] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   19.148551] wlan0: authenticate with 00:04:ed:54:bc:0c (try 1)
[   19.149722] wlan0: authenticated
[   19.149851] wlan0: associate with 00:04:ed:54:bc:0c (try 1)
[   19.162126] wlan0: RX AssocResp from 00:04:ed:54:bc:0c (capab=0x411 status=0 aid=1)
[   19.162140] wlan0: associated
[   19.164824] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   20.077184] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=600
[   24.746925] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[   24.746949] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   24.750589] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[   24.750613] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   27.913492] ata1.00: configured for UDMA/100
[   27.913521] ata1: EH complete
[   28.913921] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[   28.913945] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   28.917647] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[   28.917670] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   28.933707] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[   28.933730] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   28.937311] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[   28.937334] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   28.993591] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[   28.993615] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   28.997346] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[   28.997370] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   29.063477] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[   29.063501] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   29.067074] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[   29.067099] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   29.112465] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[   29.112490] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   29.116171] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[   29.116195] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   29.544861] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=600
[   30.048055] wlan0: no IPv6 routers present
[   41.623232] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[   41.623249] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   41.626934] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[   41.626951] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   41.653408] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[   41.653425] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   41.657088] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[   41.657103] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   41.672912] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[   41.672929] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   41.676320] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[   41.676336] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[   41.723705] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[   41.723723] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[   41.727403] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[   41.727419] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[   41.787393] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[   41.787411] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[   41.791147] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[   41.791172] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[   41.838982] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[   41.839006] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[   41.845104] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[   41.845127] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[  185.064916] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  185.064940] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[  185.068414] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  185.068437] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[  185.085283] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  185.085299] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[  185.088993] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  185.089017] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[  185.104937] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  185.104955] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[  185.108545] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  185.108561] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[  185.174722] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  185.174740] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[  185.178403] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  185.178428] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[  185.233577] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  185.233595] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[  185.237003] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  185.237026] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[  185.283711] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  185.283729] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[  185.287413] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  185.287428] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[  185.799663] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  185.799681] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[  185.803040] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  185.803065] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[  185.829119] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  185.829137] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[  185.832540] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  185.832563] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[  185.859839] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  185.859857] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[  185.863401] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  185.863425] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[  185.909669] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[  185.909687] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[  185.913139] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[  185.913153] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[  185.979560] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[  185.979578] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[  185.983197] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[  185.983213] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[  186.028585] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[  186.028603] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[  186.031973] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[  186.031990] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
axr@axr-laptop:~$


forse può servire!!!
grazieeì del tuo aiuto

[gdivito]

con metacity va meglio?

[axr]

uguale!!!!!

[gdivito]

e allora niente, è un bug.

Comunque allega qui il file /var/log/Xorg.0.log e, se esiste /etc/X11/xorg.conf

[axr]

Codice: Seleziona tutto

axr@axr-laptop:~$ cat /etc/X11/xorg.conf
 Section "ServerLayout"
   Identifier     "X.org Configured"
   Screen      0  "Screen0" 0 0
   InputDevice    "Mouse0" "CorePointer"
   InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
   ModulePath   "/usr/lib/xorg/modules"
   FontPath     "/usr/share/fonts/X11/misc"
   FontPath     "/usr/share/fonts/X11/cyrillic"
   FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
   FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
   FontPath     "/usr/share/fonts/X11/Type1"
   FontPath     "/usr/share/fonts/X11/100dpi"
   FontPath     "/usr/share/fonts/X11/75dpi"
   FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
   FontPath     "built-ins"
EndSection

Section "Module"
   Load  "dri"
   Load  "record"
   Load  "dbe"
   Load  "glx"
   Load  "dri2"
   Load  "extmod"
EndSection

Section "InputDevice"
   Identifier  "Keyboard0"
   Driver      "kbd"
EndSection

Section "InputDevice"
   Identifier  "Mouse0"
   Driver      "mouse"
   Option       "Protocol" "auto"
   Option       "Device" "/dev/input/mice"
   Option       "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
   Identifier   "Monitor0"
   VendorName   "Monitor Vendor"
   ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "NoAccel"               # [<bool>]
        #Option     "SWcursor"              # [<bool>]
        #Option     "ColorKey"              # <i>
        #Option     "CacheLines"            # <i>
        #Option     "Dac6Bit"               # [<bool>]
        #Option     "DRI"                   # [<bool>]
        #Option     "NoDDC"                 # [<bool>]
        #Option     "ShowCache"             # [<bool>]
        #Option     "XvMCSurfaces"          # <i>
        #Option     "PageFlip"              # [<bool>]
   #Option     "AccelMethod" "EXA"
        #Option     "Tiling" "on"
   Identifier  "Card0"
   Driver      "intel"
   BusID       "PCI:0:2:0"
EndSection

Section "Screen"
   Identifier "Screen0"
   Device     "Card0"
   Monitor    "Monitor0"
   SubSection "Display"
      Viewport   0 0
      Depth     1
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     4
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     8
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     15
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     16
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     24
   EndSubSection
EndSection


Codice: Seleziona tutto

[   113.425]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[   113.425] X Protocol Version 11, Revision 0
[   113.426] Build Operating System: Linux 2.6.24-25-server i686 Ubuntu
[   113.426] Current Operating System: Linux axr-laptop 2.6.35-18-generic #24-Ubuntu SMP Mon Aug 23 02:34:12 UTC 2010 i686
[   113.426] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-18-generic root=UUID=3d10b709-2191-429c-a6e0-450bbf1f562a ro quiet splash
[   113.426] Build Date: 24 August 2010  09:14:22AM
[   113.426] xorg-server 2:1.9.0-0ubuntu1 (For technical support please see http://www.ubuntu.com/support)
[   113.426] Current version of pixman: 0.18.2
[   113.427]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[   113.427] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   113.428] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 26 00:53:39 2010
[   113.429] (==) Using config file: "/etc/X11/xorg.conf"
[   113.429] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   113.432] (==) ServerLayout "X.org Configured"
[   113.432] (**) |-->Screen "Screen0" (0)
[   113.432] (**) |   |-->Monitor "Monitor0"
[   113.434] (**) |   |-->Device "Card0"
[   113.434] (**) |-->Input Device "Mouse0"
[   113.434] (**) |-->Input Device "Keyboard0"
[   113.434] (==) Automatically adding devices
[   113.435] (==) Automatically enabling devices
[   113.435] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   113.436]    Entry deleted from font path.
[   113.436] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   113.436]    Entry deleted from font path.
[   113.437] (**) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/75dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   /usr/share/fonts/X11/75dpi,
   /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
   built-ins,
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/75dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   /usr/share/fonts/X11/75dpi,
   /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
   built-ins
[   113.437] (**) ModulePath set to "/usr/lib/xorg/modules"
[   113.437] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   113.437] (WW) Disabling Mouse0
[   113.437] (WW) Disabling Keyboard0
[   113.438] (II) Loader magic: 0x81f8e00
[   113.438] (II) Module ABI versions:
[   113.438]    X.Org ANSI C Emulation: 0.4
[   113.438]    X.Org Video Driver: 8.0
[   113.438]    X.Org XInput driver : 11.0
[   113.438]    X.Org Server Extension : 4.0
[   113.442] (--) PCI:*(0:0:2:0) 8086:27ae:1462:0110 rev 3, Mem @ 0xdfe80000/524288, 0xc0000000/268435456, 0xdff00000/262144, I/O @ 0x0000e0f0/8
[   113.443] (--) PCI: (0:0:2:1) 8086:27a6:1462:0110 rev 3, Mem @ 0xdfe00000/524288
[   113.444] (II) Open ACPI successful (/var/run/acpid.socket)
[   113.444] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[   113.445] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[   113.445] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[   113.445] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[   113.445] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[   113.445] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[   113.445] (II) LoadModule: "dri"
[   113.448] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   113.449] (II) Module dri: vendor="X.Org Foundation"
[   113.449]    compiled for 1.9.0, module version = 1.0.0
[   113.450]    ABI class: X.Org Server Extension, version 4.0
[   113.450] (II) Loading extension XFree86-DRI
[   113.450] (II) LoadModule: "record"
[   113.452] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   113.452] (II) Module record: vendor="X.Org Foundation"
[   113.452]    compiled for 1.9.0, module version = 1.13.0
[   113.453]    Module class: X.Org Server Extension
[   113.453]    ABI class: X.Org Server Extension, version 4.0
[   113.453] (II) Loading extension RECORD
[   113.453] (II) LoadModule: "dbe"
[   113.454] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   113.455] (II) Module dbe: vendor="X.Org Foundation"
[   113.455]    compiled for 1.9.0, module version = 1.0.0
[   113.455]    Module class: X.Org Server Extension
[   113.455]    ABI class: X.Org Server Extension, version 4.0
[   113.456] (II) Loading extension DOUBLE-BUFFER
[   113.456] (II) LoadModule: "glx"
[   113.457] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   113.458] (II) Module glx: vendor="X.Org Foundation"
[   113.458]    compiled for 1.9.0, module version = 1.0.0
[   113.458]    ABI class: X.Org Server Extension, version 4.0
[   113.459] (==) AIGLX enabled
[   113.459] (II) Loading extension GLX
[   113.459] (II) LoadModule: "dri2"
[   113.460] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   113.461] (II) Module dri2: vendor="X.Org Foundation"
[   113.461]    compiled for 1.9.0, module version = 1.2.0
[   113.461]    ABI class: X.Org Server Extension, version 4.0
[   113.462] (II) Loading extension DRI2
[   113.462] (II) LoadModule: "extmod"
[   113.463] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   113.464] (II) Module extmod: vendor="X.Org Foundation"
[   113.464]    compiled for 1.9.0, module version = 1.0.0
[   113.464]    Module class: X.Org Server Extension
[   113.465]    ABI class: X.Org Server Extension, version 4.0
[   113.465] (II) Loading extension MIT-SCREEN-SAVER
[   113.465] (II) Loading extension XFree86-VidModeExtension
[   113.465] (II) Loading extension XFree86-DGA
[   113.465] (II) Loading extension DPMS
[   113.465] (II) Loading extension XVideo
[   113.465] (II) Loading extension XVideo-MotionCompensation
[   113.465] (II) Loading extension X-Resource
[   113.465] (II) LoadModule: "intel"
[   113.466] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   113.467] (II) Module intel: vendor="X.Org Foundation"
[   113.468]    compiled for 1.8.99.905, module version = 2.12.0
[   113.468]    Module class: X.Org Video Driver
[   113.468]    ABI class: X.Org Video Driver, version 8.0
[   113.468] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
   i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
   E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
   965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
   4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[   113.475] (--) using VT number 8

[   113.510] drmOpenDevice: node name is /dev/dri/card0
[   113.511] drmOpenDevice: open result is 9, (OK)
[   113.533] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[   113.533] drmOpenDevice: node name is /dev/dri/card0
[   113.533] drmOpenDevice: open result is 9, (OK)
[   113.533] drmOpenByBusid: drmOpenMinor returns 9
[   113.533] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[   113.534] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   113.534] (==) intel(0): RGB weight 888
[   113.534] (==) intel(0): Default visual is TrueColor
[   113.534] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
[   113.534] (--) intel(0): Chipset: "945GME"
[   113.534] (==) intel(0): video overlay key set to 0x101fe
[   113.565] (II) intel(0): Output VGA1 using monitor section Monitor0
[   113.565] (II) intel(0): Output LVDS1 has no monitor section
[   113.566] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[   113.596] (II) intel(0): EDID for output VGA1
[   113.596] (II) intel(0): EDID for output LVDS1
[   113.598] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   113.598] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   113.598] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   113.598] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   113.598] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   113.598] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   113.599] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   113.599] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[   113.599] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[   113.599] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[   113.599] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   113.599] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[   113.599] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[   113.599] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[   113.599] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[   113.599] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[   113.599] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[   113.600] (II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
[   113.600] (II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
[   113.600] (II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
[   113.600] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   113.600] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   113.600] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   113.600] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   113.600] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   113.600] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   113.600] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   113.601] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   113.601] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   113.601] (II) intel(0): Not using default mode "1024x768i" (interlace mode not supported)
[   113.601] (II) intel(0): Not using default mode "512x384i" (doublescan mode not supported)
[   113.601] (II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
[   113.601] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   113.601] (II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
[   113.601] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   113.601] (II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
[   113.601] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   113.601] (II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
[   113.602] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   113.602] (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
[   113.602] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[   113.602] (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
[   113.602] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   113.602] (II) intel(0): Not using default mode "1280x960" (hsync out of range)
[   113.602] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   113.602] (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
[   113.602] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   113.602] (II) intel(0): Not using default mode "1280x1024" (hsync out of range)
[   113.603] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   113.603] (II) intel(0): Not using default mode "1280x1024" (hsync out of range)
[   113.603] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   113.603] (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[   113.603] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   113.603] (II) intel(0): Not using default mode "1600x1200" (hsync out of range)
[   113.603] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   113.603] (II) intel(0): Not using default mode "1600x1200" (hsync out of range)
[   113.603] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   113.603] (II) intel(0): Not using default mode "1600x1200" (hsync out of range)
[   113.603] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   113.604] (II) intel(0): Not using default mode "1600x1200" (hsync out of range)
[   113.604] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   113.604] (II) intel(0): Not using default mode "1792x1344" (hsync out of range)
[   113.604] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   113.604] (II) intel(0): Not using default mode "1792x1344" (hsync out of range)
[   113.604] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   113.604] (II) intel(0): Not using default mode "1856x1392" (hsync out of range)
[   113.604] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   113.604] (II) intel(0): Not using default mode "1856x1392" (hsync out of range)
[   113.604] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   113.604] (II) intel(0): Not using default mode "1920x1440" (hsync out of range)
[   113.605] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   113.605] (II) intel(0): Not using default mode "1920x1440" (hsync out of range)
[   113.605] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   113.605] (II) intel(0): Not using default mode "832x624" (exceeds panel dimensions)
[   113.605] (II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
[   113.605] (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
[   113.605] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[   113.605] (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
[   113.605] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[   113.605] (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
[   113.605] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[   113.606] (II) intel(0): Not using default mode "1152x864" (hsync out of range)
[   113.606] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[   113.606] (II) intel(0): Not using default mode "1152x864" (hsync out of range)
[   113.606] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[   113.606] (II) intel(0): Not using default mode "1152x864" (hsync out of range)
[   113.606] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[   113.606] (II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
[   113.606] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[   113.606] (II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions)
[   113.606] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[   113.606] (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
[   113.607] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   113.607] (II) intel(0): Not using default mode "1400x1050" (hsync out of range)
[   113.607] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   113.607] (II) intel(0): Not using default mode "1400x1050" (hsync out of range)
[   113.607] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   113.607] (II) intel(0): Not using default mode "1400x1050" (hsync out of range)
[   113.607] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   113.607] (II) intel(0): Not using default mode "1440x900" (exceeds panel dimensions)
[   113.607] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[   113.607] (II) intel(0): Not using default mode "1600x1024" (exceeds panel dimensions)
[   113.608] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[   113.608] (II) intel(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
[   113.608] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[   113.608] (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
[   113.608] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[   113.608] (II) intel(0): Not using default mode "1680x1050" (hsync out of range)
[   113.608] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[   113.608] (II) intel(0): Not using default mode "1680x1050" (hsync out of range)
[   113.608] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[   113.608] (II) intel(0): Not using default mode "1680x1050" (hsync out of range)
[   113.608] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[   113.609] (II) intel(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking)
[   113.609] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[   113.609] (II) intel(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking)
[   113.609] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[   113.609] (II) intel(0): Not using default mode "1920x1440" (hsync out of range)
[   113.609] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   113.609] (II) intel(0): Not using default mode "2048x1536" (hsync out of range)
[   113.609] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   113.609] (II) intel(0): Not using default mode "2048x1536" (hsync out of range)
[   113.609] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   113.609] (II) intel(0): Not using default mode "2048x1536" (hsync out of range)
[   113.610] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   113.610] (II) intel(0): Printing probed modes for output LVDS1
[   113.610] (II) intel(0): Modeline "1024x600"x60.0   45.00  1024 1072 1184 1200  600 601 604 625 -hsync -vsync (37.5 kHz)
[   113.610] (II) intel(0): Modeline "800x600"x85.1   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
[   113.610] (II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[   113.610] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[   113.610] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   113.610] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[   113.611] (II) intel(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
[   113.611] (II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[   113.611] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[   113.611] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   113.611] (II) intel(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz)
[   113.611] (II) intel(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz)
[   113.611] (II) intel(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz)
[   113.611] (II) intel(0): Output VGA1 disconnected
[   113.612] (II) intel(0): Output LVDS1 connected
[   113.612] (II) intel(0): Using exact sizes for initial modes
[   113.612] (II) intel(0): Output LVDS1 using initial mode 1024x600
[   113.612] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   113.612] (II) intel(0): Kernel page flipping support detected, but forcibly disabled.
[   113.612] (==) intel(0): DPI set to (96, 96)
[   113.612] (II) Loading sub module "fb"
[   113.612] (II) LoadModule: "fb"
[   113.613] (II) Loading /usr/lib/xorg/modules/libfb.so
[   113.613] (II) Module fb: vendor="X.Org Foundation"
[   113.614]    compiled for 1.9.0, module version = 1.0.0
[   113.614]    ABI class: X.Org ANSI C Emulation, version 0.4
[   113.614] (==) Depth 24 pixmap format is 32 bpp
[   113.614] (II) intel(0): [DRI2] Setup complete
[   113.614] (II) intel(0): [DRI2]   DRI driver: i915
[   113.614] (**) intel(0): Tiling enabled
[   113.614] (**) intel(0): SwapBuffers wait enabled
[   113.614] (==) intel(0): VideoRam: 262144 KB
[   113.615] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096, tiled
[   113.615] (II) UXA(0): Driver registered support for the following operations:
[   113.615] (II)         solid
[   113.615] (II)         copy
[   113.615] (II)         composite (RENDER acceleration)
[   113.615] (II)         put_image
[   113.615] (II)         get_image
[   113.616] (==) intel(0): Backing store disabled
[   113.616] (==) intel(0): Silken mouse enabled
[   113.616] (II) intel(0): Initializing HW Cursor
[   113.680] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   113.721] (==) intel(0): DPMS enabled
[   113.721] (==) intel(0): Intel XvMC decoder disabled
[   113.721] (II) intel(0): Set up textured video
[   113.721] (II) intel(0): Set up overlay video
[   113.722] (II) intel(0): direct rendering: DRI2 Enabled
[   113.724] (--) RandR disabled
[   113.724] (II) Initializing built-in extension Generic Event Extension
[   113.724] (II) Initializing built-in extension SHAPE
[   113.724] (II) Initializing built-in extension MIT-SHM
[   113.724] (II) Initializing built-in extension XInputExtension
[   113.724] (II) Initializing built-in extension XTEST
[   113.724] (II) Initializing built-in extension BIG-REQUESTS
[   113.724] (II) Initializing built-in extension SYNC
[   113.724] (II) Initializing built-in extension XKEYBOARD
[   113.724] (II) Initializing built-in extension XC-MISC
[   113.725] (II) Initializing built-in extension SECURITY
[   113.725] (II) Initializing built-in extension XINERAMA
[   113.725] (II) Initializing built-in extension XFIXES
[   113.725] (II) Initializing built-in extension RENDER
[   113.725] (II) Initializing built-in extension RANDR
[   113.725] (II) Initializing built-in extension COMPOSITE
[   113.725] (II) Initializing built-in extension DAMAGE
[   113.725] (II) Initializing built-in extension GESTURE
[   113.783] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   113.783] (II) AIGLX: enabled GLX_INTEL_swap_event
[   113.783] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   113.783] (II) AIGLX: enabled GLX_SGI_make_current_read
[   113.783] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   113.784] (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
[   113.784] (II) GLX: Initialized DRI2 GL provider for screen 0
[   113.786] (II) intel(0): Setting screen physical size to 270 x 158
[   114.028] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[   114.072] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   114.072] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   114.072] (II) LoadModule: "evdev"
[   114.073] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   114.073] (II) Module evdev: vendor="X.Org Foundation"
[   114.073]    compiled for 1.8.99.905, module version = 2.3.2
[   114.074]    Module class: X.Org XInput Driver
[   114.074]    ABI class: X.Org XInput driver, version 11.0
[   114.074] (**) Power Button: always reports core events
[   114.074] (**) Power Button: Device: "/dev/input/event3"
[   114.085] (II) Power Button: Found keys
[   114.085] (II) Power Button: Configuring as keyboard
[   114.085] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[   114.085] (**) Option "xkb_rules" "evdev"
[   114.085] (**) Option "xkb_model" "evdev"
[   114.085] (**) Option "xkb_layout" "it"
[   114.098] (II) XKB: reuse xkmfile /var/lib/xkb/server-35DF0DEC488035CD7337E5EF69F018BFAFADCAC5.xkm
[   114.103] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[   114.103] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   114.103] (**) Video Bus: always reports core events
[   114.103] (**) Video Bus: Device: "/dev/input/event5"
[   114.113] (II) Video Bus: Found keys
[   114.113] (II) Video Bus: Configuring as keyboard
[   114.113] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[   114.113] (**) Option "xkb_rules" "evdev"
[   114.113] (**) Option "xkb_model" "evdev"
[   114.113] (**) Option "xkb_layout" "it"
[   114.120] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[   114.120] (II) No input driver/identifier specified (ignoring)
[   114.122] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   114.122] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   114.122] (**) Power Button: always reports core events
[   114.123] (**) Power Button: Device: "/dev/input/event1"
[   114.133] (II) Power Button: Found keys
[   114.133] (II) Power Button: Configuring as keyboard
[   114.133] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[   114.133] (**) Option "xkb_rules" "evdev"
[   114.133] (**) Option "xkb_model" "evdev"
[   114.133] (**) Option "xkb_layout" "it"
[   114.136] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[   114.136] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   114.136] (**) Sleep Button: always reports core events
[   114.136] (**) Sleep Button: Device: "/dev/input/event2"
[   114.149] (II) Sleep Button: Found keys
[   114.149] (II) Sleep Button: Configuring as keyboard
[   114.149] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[   114.149] (**) Option "xkb_rules" "evdev"
[   114.149] (**) Option "xkb_model" "evdev"
[   114.149] (**) Option "xkb_layout" "it"
[   114.164] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event6)
[   114.165] (**) BisonCam, NB Pro: Applying InputClass "evdev keyboard catchall"
[   114.165] (**) BisonCam, NB Pro: always reports core events
[   114.165] (**) BisonCam, NB Pro: Device: "/dev/input/event6"
[   114.181] (II) BisonCam, NB Pro: Found keys
[   114.181] (II) BisonCam, NB Pro: Configuring as keyboard
[   114.181] (II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD)
[   114.181] (**) Option "xkb_rules" "evdev"
[   114.181] (**) Option "xkb_model" "evdev"
[   114.181] (**) Option "xkb_layout" "it"
[   114.196] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[   114.196] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   114.197] (**) AT Translated Set 2 keyboard: always reports core events
[   114.197] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[   114.213] (II) AT Translated Set 2 keyboard: Found keys
[   114.213] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[   114.213] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[   114.213] (**) Option "xkb_rules" "evdev"
[   114.213] (**) Option "xkb_model" "evdev"
[   114.213] (**) Option "xkb_layout" "it"
[   114.216] (II) config/udev: Adding input device FSPPS/2 Sentelic FingerSensingPad (/dev/input/event7)
[   114.216] (**) FSPPS/2 Sentelic FingerSensingPad: Applying InputClass "evdev pointer catchall"
[   114.216] (**) FSPPS/2 Sentelic FingerSensingPad: always reports core events
[   114.216] (**) FSPPS/2 Sentelic FingerSensingPad: Device: "/dev/input/event7"
[   114.229] (II) FSPPS/2 Sentelic FingerSensingPad: Found 11 mouse buttons
[   114.229] (II) FSPPS/2 Sentelic FingerSensingPad: Found scroll wheel(s)
[   114.229] (II) FSPPS/2 Sentelic FingerSensingPad: Found relative axes
[   114.229] (II) FSPPS/2 Sentelic FingerSensingPad: Found x and y relative axes
[   114.229] (II) FSPPS/2 Sentelic FingerSensingPad: Configuring as mouse
[   114.229] (**) FSPPS/2 Sentelic FingerSensingPad: YAxisMapping: buttons 4 and 5
[   114.229] (**) FSPPS/2 Sentelic FingerSensingPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   114.229] (II) XINPUT: Adding extended input device "FSPPS/2 Sentelic FingerSensingPad" (type: MOUSE)
[   114.230] (II) FSPPS/2 Sentelic FingerSensingPad: initialized for relative axes.
[   114.231] (II) config/udev: Adding input device FSPPS/2 Sentelic FingerSensingPad (/dev/input/mouse0)
[   114.231] (II) No input driver/identifier specified (ignoring)

ciao e grazie

[gdivito]

sudo rm /etc/X11/xorg.conf

poi riavvia e prova la sessione normale, non URE, e prova anche a dare

metacity --replace

[axr]

ciao non cambia nulla!!!!!

[gdivito]

mmm.... non vedo errori... evidentemente è un bug, maverick è una versione di sviluppo, quindi non c'è da stupirsi.

[axr]

hai ragione!!!
per ora intanto installo anche archlinux e ti ringrazio del tuo aiuto.

ciao