Ciao a tutti. Lo scanner in questione non funziona. La versione di ubuntu è la 10.4
Avvio Xsane e il messaggio di errore è Non è possibile aprire il dispositivo 'snapscan:libusb:004:004': si è verificato un errore...
ps: prima era 004:002 , poi è diventato 003 e da quando ho avviato xsane da root è 004.
Nella caretella /usr/share/sane/snapscan è presente il file SnapScan_1212U_2.bin
Questo è cioè che c'è scritto nel file (posto solo le prime righe)
#------------------------------ General -----------------------------------
# Change to the fully qualified filename of your firmware file, if
# firmware upload is needed by the scanner
firmware /usr/share/sane/snapscan/SnapScan_1212U_2.bin
# If not automatically found you may manually specify a device name.
# For USB scanners also specify bus=usb, e.g.
/dev/usb/scanner0 bus=usb
# For SCSI scanners specify the generic device, e.g. /dev/sg0 on Linux.
# /dev/sg0
...
# Agfa Snapscan e42
usb 0x06bd 0x20ff
# Agfa Snapscan e50
usb 0x06bd 0x208f
# Agfa Snapscan e52
usb 0x06bd 0x20fd
...
posto il sudo sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x06bd [AGFA], product=0x208f [ Snapscan1212u_2]) at libusb:004:004
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
E ancora
sala@saladek:~$ sudo scanimage -L
device `snapscan:libusb:004:004' is a AGFA SNAPSCAN 1212U_2 flatbed scanner
Chi mi può aiutare a risolvere il problema?
Nella vecchia versione lo scanner (dopo le procedure necessarie) funzionava. Poi ha smesso di funzionare, ho aggiornato Ubuntu all'ultima versione ed eccomi qua.
Grazie
Lorenzo
Scanner AGFA SnapScan e50
Re: Scanner AGFA SnapScan e50
Nessuno capace di trovare la soluzione? ::)
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 7 ospiti